• 0
Shop Products $

TUBING W/GUIDE 03ID 16OD 70 CM 5/PK - G1820-65531

FERRULE + O-RING KIT FOR CARRIER GAS 1/P - G1820-65533

BASIC LC CONNECTION KIT - G1820-65541

CrossLab Filters for ICP-MS, Agilent Technologies - G1820-80341, Argon gas filter

CrossLab Skimmer Bases for ICP-MS, Agilent Technologies - G1833-65132, Platinum (Pt) skimmer cone with copper (Cu) base Agilent 7500cs, use with Pt sampling cone.

O-RINGS FOR VENT VALVE VITON 2/PK - G1833-65332

CrossLab Tools and Manuals for ICP-MS, Agilent Technologies - G1833-65404, ICP-MS lens polishing paper, 5 sheets each of waterproof polishing paper number 400 and 1200

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G1833-65430, Clamp for connection of ball and socket joint on spray chamber outlet, quartz connector and torch inlet

NI SKIMMER CONE FOR 7500C 1/PK - G1833-65497

CrossLab Peristaltic Pump Tubing for ICP-MS, Agilent Technologies - G1833-65571, Peristaltic pump tubing, aqueous, HF acid and strong acid compatibility, for internal standard (ISTD) uptake, 3 stops, orange/red

PFA SAMPLE TUBING 015 ID 16 OD 70 CM PK3 - G1833-65572

PFA SAMPLE TUBING02 ID16 OD 70CM PK3 - G1833-65573

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G1833-65583, Nebulizer gas line connector for Microflow PFA concentric nebulizer

SKIMMER BASE BRASS FOR 7500 CS/CE/CX - G1833-65590

SKIMMER BASE STAINLESS FOR 7500CE/CX/CS - G1833-65591

EXTRACTION LENS 1 FOR S-LENS FOR ICP-MS - G1833-65592

EXTRACTION LENS 2 FOR S-LENS FOR ICP-MS - G1833-65593

STRAINER FOR COOLING WATER FOR ICP-MS - G1833-67024

G1888A PM KIT WITH 1-ML LOOP - G1888-60702

SPRAY SHIELD (END CAP) - G1946-20157

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1946-20213, Ferrule, for nebulizer needle, graphite-filled polyimide, 0.3 mm

H.T. CAPILLARY CAP - G1946-20301

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1946-67098, Nebulizer assembly, ESI, tested

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1946-68703, ESI nebulizer kit. Includes needle holder, ferrule, and ESI needle

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1946-68704, APCI needle replacement kit

CAPILLARY CLEANING WIRE (500 FT SPOOL) - G1946-80054

CORONA NEEDLE (EACH) - G1947-20029

SPRAY SHIELD SMALL - G1958-20050

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1958-67098, Nebulizer support assembly, ES, tested

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1960-20032, Nebulizer needle, ESI

Nebulizers and Supplies, Agilent Technologies - G1960-20033, Microflow nebulizer needle

NARROW BORE CAPILLARY CAP - G1960-20310

UNIV INLET FILTER REPLACEMENT KIT - G1960-67100

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1960-67470, Nebulizer adjustment kit

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1960-80103, Channel electron multiplier, low gain, for LC/MS

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1964-80659, Capillary, 6-inlet, 0.61×90 mm, 1G, hexabore resistive capillary for the Agilent 6400 Series Triple Quadrupole LC/MS

APPI LAMP - G1971-60025

TARGET PLATE FOR AP-MALDI LC/MS - G1972-60025

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G1999-20021, Screw, socket-head cap for mounting filaments, for 5973; 5975; 5977; 7000A; 7000B; 7000C; 7200

CrossLab Instrument Supplies for GC/MS, Agilent Technologies - G1999-20446, Drawout plate, 73CI, for Agilent 5975 MSD

PLATE F/54X2ML VIAL F/G1367A/B/C/D/E PK6 - G2255-68700, Vial plate, for 54×2 ml vials

Crosslab Bottle Head Assemblies for HPLC, Agilent Technologies - G2258-23201, Frit adapter, preparative, PTFE, for ¹/8 IN. Ext. Ø tubing (3.2 mm), for 3150-0944, used with Dual loop autosamplers

CrossLab Needle and Needle Seats for HPLC, Agilent Technologies - G2258-68710, Needle assembly, for G2258A dual loop autosampler

CrossLab Needle and Needle Seats for HPLC, Agilent Technologies - G2258-87102, Twin needle seat, for G2258A dual loop autosampler

BUFFER LOOP TUBING ASSY PTFE - G2258-87300

CrossLab Capillaries for HPLC, Agilent Technologies - G2258-87301, Standard capillary, S/S, pre-swaged/pre-swaged

WASTE TUBE 08 MM ID 15 CM LONG - G2258-87310

FRONT SEAT TUBE PTFE 025MM ID 10CM LONG - G2258-87312

BACK SEAT TUBE PTFE 025MM ID 12 CM LONG - G2258-87313

CrossLab Tubing for HPLC, Agilent Technologies - G2258-87315, Back seat tube, 24 µl

CrossLab Tubing for HPLC, Agilent Technologies - G2258-87316, Front seat tube

NEEDLE SEAT 0.5 MM ID CAPILLARY 20 UL - G2260-87101, Needle seat, 0.5 mm Int.Ø capillary, 20 µl, for G2260A preparative autosampler. Compatible with needle assembly G2260-87201

NEEDLE ASSEMBLY F/G2260-87101 NEEDL SEAT - G2260-87201, Needle assembly, stainless steel, for for G2260A preparative autosampler. Compatible with needle seat G2260-87101

CrossLab Capillaries for HPLC, Agilent Technologies - G2260-87300, Standard capillary, SX/S, non-swaged/non-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - G2260-87301, Standard capillary, S/S, non-swaged/non-swaged

DISCHARGE TUBE KIT - G2350-61090

CrossLab Electron Capture Detector (ECD) for GC, Agilent Technologies - G2397-80520, ECD make-up gas adapter, for 6850/6890 GC

API-ES NEBULIZER NEEDLE - G2427A

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G2428A, APCI nebulizer needle

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G2571-80103, Electron multiplier horn, high gain

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G2589-20043, Ion source body, for Agilent 5973/75, 5977 Inert MSD

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G2589-20100, Drawout plate, 3 mm, for inert source, for 5973; 5975; 5977; 7000A; 7000B

INERT SOURCE WASHER - G2589-20101

PTV SEPTUMLESS HEAD 6890 - G2617-60507

PTV COL ADAPTER TUBE - G2617-80550

Capillary Flow Technology Supplies, Agilent Technologies - G2855-20532, Internal nut for ¹/6 IN. stainless steel capillary flow technology fitting

Ultimate Union, Agilent Technologies - G2855-20555, Swaging nut, ultimate union and QuickSwap

Capillary Flow Technology Supplies, Agilent Technologies - G2855-20590, Column storage fitting

CrossLab Flexible Metal Ferrules for GC, Agilent Technologies - G2855-28501, CFT capillary ferrule Flex Gold, column int.Ø up to 0.25 mm, stainless steel, max. 400 °C

Capillary Flow Technology Supplies, Agilent Technologies - G2855-60200, Ferrule Pre-Swage tool, capillary flow

Capillary Flow Technology Supplies, Agilent Technologies - G2855-60570, Plug for microfluidic manifold or unions

CrossLab ISIS (Integrated Sample Introduction System) Supplies for ICP-MS (7700/8800), Agilent Technologies - G3138-65117, ISIS Rotor seal for valve

CrossLab ISIS (Integrated Sample Introduction System) Supplies for ICP-MS (7700/8800), Agilent Technologies - G3138-65119, ISIS ferrule for valve. Suitable for ISIS used with Agilent 7700 and 8800 ICP-MS

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G3138-65129, Plug for cross joint

CrossLab Nebulizers for ICP-MS, Agilent Technologies - G3139-65100, Nebulizer, MicroFlow, concentric, inert PFA, self-aspirates at 200 µl/min, standard on Agilent ICPMS with s-lens (semicon)

CrossLab Nebulizers for ICP-MS, Agilent Technologies - G3139-65102, Nebulizer, MicroFlow, concentric, inert PFA, threaded connector, with Agilent I-AS probe, self-aspirates at 200 µl/min, standard on Agilent ICPMS with s-lens (semicon) and I-AS

CrossLab Speciation Columns for ICP-MS, Agilent Technologies - G3154-65002, Guard Column for arsenic Speciation

TORCH GC/ICP-MS INTERFACE - G3158-80074

CrossLab Integrated Autosampler (I-AS) Supplies for ICP-MS, Agilent Technologies - G3160-65305, Vial, PP, 50 ml, 41 mm Ext.Ø, 41.5 mm tall, for Agilent integrated autosampler (I-AS) tray type C (18-position)

CrossLab Autosampler Needles and Plungers, Agilent Technologies - G3160-65306, I-AS autosampler needle, standard probe, PFA, 0.3 mm Int.Ø

CrossLab Integrated Autosampler (I-AS) Supplies for ICP-MS, Agilent Technologies - G3160-65307, Rinse bottle, external, 100 ml, with caps

CrossLab Integrated Autosampler (I-AS) Supplies for ICP-MS, Agilent Technologies - G3160-65315, Vial, PE, 2 ml, 12 mm Ext.Ø, 24.5 mm tall, conical base, for Agilent integrated autosampler (I-AS) tray type D (89-position)

CrossLab Nebulizers for ICP-MS, Agilent Technologies - G3161-80001, Nebulizer, Mira Mist, parallel path, PEEK, for high TDS applications, suitable for all Agilent ICP-MS series

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G3163-20530, Drawout Plate, 6 mm, for Agilent 5973/75, 5977

CrossLab Instrument Supplies for GC/MS, Agilent Technologies - G3170-60172, Repeller assembly, EI 350, stainless steel, for Agilent 5975C MSD

CrossLab Instrument Supplies for GC/MS, Agilent Technologies - G3170-80002, Calibrant Bulb

CrossLab Vacuum Pump Supplies for GC/MS, Agilent Technologies - G3170-80006, Foreline pump exhaust fitting

CrossLab GC/MS supplies, Agilent Technologies - G3170-80105, Detector assembly, triple-axis, ceramic

Ultimate Union, Agilent Technologies - G3182-60581, Union, Ultra Inert, no fittings

Ultimate Union, Agilent Technologies - G3182-61580, Ultimate union kit, deactivated

Capillary Flow Technology Supplies, Agilent Technologies - G3184-60065, Tee, inert, for capillary flow technology

CrossLab Flexible Metal Ferrules for GC, Agilent Technologies - G3188-27504, Flexible metal ferrule, UltiMetal Plus, without hole, to plug capillary flow technology fittings, stainless steel, max. 400 °C

Crosslab Flexible Metal Ferrules for GC, Agilent Technologies - G3188-27505, Flexible stainless steel capillary ferrule, 0.6 mm Int.Ø, UltiMetal Plus, for 0.25 and 0.32 mm Int.Ø UltiMetal column tubing, maximum 400 °C

Crosslab Flexible Metal Ferrules for GC, Agilent Technologies - G3188-27506, Flexible stainless steel capillary ferrule, 0.8 mm Int.Ø, UltiMetal Plus, for 0.53 mm Int.Ø UltiMetal column tubing, maximum 400 °C

CrossLab Nebulizers for ICP-MS, Agilent Technologies - G3266-80005, Nebulizer, MicroMist, concentric, borosilicate glass, U-series with UniFit sample connector and threaded direct connection gas line, standard with Agilent 8900 Series ICP-MS

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G3266-80010, Sample uptake tube and connector, EzyFit, 0.25 mm int.Ø., 700 mm capillary, for MicroMist concentric nebulizer

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G3266-80011, Sample uptake tube and connector, EzyFit, 0.5 mm int.Ø., 700 mm capillary, for MicroMist concentric nebulizer

CrossLab Nebulizer Supplies for ICP-OES, Agilent Technologies - G3266-80012, Sample uptake tube and connector, UniFit, 0.5 mm int.Ø., with 0.5 mm int.Ø. × 700 mm capillary, for U-Series MicroMist concentric nebulizer

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G3266-80013, Sample uptake tube and connector, UniFit, 0.25 mm int.Ø., with 0.25 mm int.Ø. × 700 mm capillary, for U-Series MicroMist concentric nebulizer

CrossLab Nebulizer Supplies for ICP-OES, Agilent Technologies - G3266-80015, EzyLok gas connector for carrier gas, suits 4 mm ext. Ø. gas inlet tubing, suits most concentric nebulizers

Category