• 0
Shop Products $

VALVE TUBING KIT SINGLE BATH 8453 DIS - 5042-1331

DISSOLUTION PROBES 09 MM ID FOR 8453 UV - 5042-1332

CrossLab Tubing and Fittings for 8453/8454 UV Systems, Agilent Technologies - 5042-1333, Tubing kit, Agilent 8453 UV sipper system

SIPPER/SAMPLER TUBING KIT FOR 8453 - 5042-1334

1/16IN PEEK FITTINGS FOR 8P VALVE 10/PK - 5042-1337

CASSETTE VARIABLE PRESSURE - 5042-1356

Fraction Collector Supplies, Agilent Technologies - 5042-1389, Closing mats for 96-well plates, silicone, pre-slit, fits 96-well plates with volume 0.5 ml

CrossLab Drain Tubing for ICP-MS, Agilent Technologies - 5042-4769, Tank, drain or rinse, PE, 4 L, for all Agilent ICP-MS systems; 7500; 7700; 7800; 7850; 8800; 8900; 7900. Can be used for waste from spray chamber drain or to supply rinse to autosampler rinse station

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5042-4775, Connector for make-up argon gas line at spray chamber end cap

O-RING FOR VACUUM CHAMBER VITON 1/PK - 5042-4790

Fraction Collector Supplies, Agilent Technologies - 5042-6458, Collecting tube, 30×100 mm

TUBING PEEK 1.6 MM OD 0.13 MM ID 5 M - 5042-6461, Tubing

TUBING PEEK 1.6 MM OD 0.18 MM ID 5 M - 5042-6462, Tubing

CrossLab Tubing for HPLC, Agilent Technologies - 5042-6463, Tubing

Fraction Collector Supplies, Agilent Technologies - 5042-6470, Collecting tube, 30×48 mm

Closures for 2 ml Crimp/Snap Top Vials, Agilent Technologies - 5042-6491, Snap caps

CrossLab Fittings for HPLC, Agilent Technologies - 5042-6500, Swagelok fitting, PEEK, double-winged, 2-piece, for ¹/16 IN. (1.6 mm) ext.Ø capillary

CrossLab Adapters and Unions for HPLC, Agilent Technologies - 5042-8517, Adapter, PEEK, female 10-32 to female ¹/4-28

CrossLab Adapters and Unions for HPLC, Agilent Technologies - 5042-8518, Adapter, PEEK, male luer to female ¹/4-28

SWAGELOK FITTING POLYKETON F/1/16IN PK10 - 5042-8957, Swagelok fitting, 1.6 mm Int.Ø, polyketone, for ¹/16 IN. (1.6 mm) Ext.Ø capillary

CrossLab ISIS (Integrated Sample Introduction System) Supplies for ICP-MS (7700/8800), Agilent Technologies - 5043-0010, Peristaltic pump tubing for ISIS-DS, PVC Tygon®, 2-stop, black/purple tabs, 2.29 mm Int.Ø.. For use with ISIS-DS on Agilent 7500, 7700, 8800 ICP-MS

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5043-0054, ISIS3, replacement collapsible ferrules, PCTFE, for ¹/16 IN. tubing. PCTFE ferrule suits flangeless tube end fitting. Suitable for ISIS3 used with Agilent 7800, 7850, 7900 and 8900 ICP-MS

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5043-0055, ISIS3, Replacement collapsible ferrules, PCTFE, for ¹/8 IN. tubing

Crosslab Peristaltic Pump Tubing for ICP-OES, Agilent Technologies - 5043-0063, SPS 3/4 Peristaltic pump tubing, aqueous, HF acid and low volatile organics chemical compatibility, 3-bridged, purple/white tabs, 72 mm tab separation. Suitable for 5100, 5110, 700 series, 5800, 5900, Liberty, Vista series, 4100, 4200, 4210

PVC FLEXIBLE DUCTING 50MM-ID SPS4 5M - 5043-0065

BLANK NUT PEEK-ST LONG FINGER-TIGHT - 5043-0277, Blank nut, PEEK-ST, long, finger-tight

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - 5043-0502, Conical adapter, for ¹/16 IN. ext.Ø sample line, of OneNeb Series 2 nebulizer

CrossLab Tools for HPLC, Agilent Technologies - 5043-0915, Mounting tool, plastic

FRONT FERRULE FOR QUICK CONNECT/TURN - 5043-0924, Front ferrule, for InfinityLab Quick Connect and Quick Turn fitting

THREAD ADAPTER GL45(M)-GPI 38(F) - 5043-1192, InfinityLab thread adapter, GL45(M) to GPI 38(F), PTFE. For InfinityLab Stay Safe cap

CHARCOAL FILTER WITH TIME STRIP 58 GRAM - 5043-1193, InfinityLab charcoal filter with time strip, 58 gram. For use with InfinityLab Stay Safe Waste Caps

CrossLab Stay Safe Caps and Accessories for HPLC, Agilent Technologies - 5043-1195, InfinityLab screw plug, ¼ IN., PTFE

CrossLab Solvent Bottles and Waste Cans for HPLC, Agilent Technologies - 5043-1196, InfinityLab waste can, GL45, 6 L

CrossLab Stay Safe Caps and Accessories for HPLC, Agilent Technologies - 5043-1214, InfinityLab fitting for 1.6 mm tubing

CrossLab Stay Safe Caps and Accessories for HPLC, Agilent Technologies - 5043-1216, InfinityLab fitting for 3.2 mm tubing

STAY SAFE CAP GL45 1 PORT - 5043-1217, InfinityLab stay safe cap, GL 45, 1 port. Includes 1 fitting (3.2 mm) and 1 venting valve

STAY SAFE CAP GL45 2 PORTS - 5043-1218, InfinityLab stay safe cap, GL 45, 2 ports. Includes 2 fittings (3.2 mm) and 1 venting valve

CrossLab Stay Safe Caps and Accessories for HPLC, Agilent Technologies - 5043-1219, InfinityLab stay safe cap, GL 45, 3 ports

CrossLab Stay Safe Caps and Accessories for HPLC, Agilent Technologies - 5043-1220, InfinityLab stay safe cap, GL 45, 4 ports for waste

WASTE CAN GL45 6 LITER W/STAY SAFE CAP - 5043-1221, 6 L, InfinityLab waste can, GL 45, with stay safe cap

KIT INFINITYLAB STAY SAFE CAP STARTER - 5043-1222, InfinityLab Stay Safe cap starter kit. Includes 4 Stay Safe caps (three AG5043-1217 and one AG5043-1218), 4 venting valves with time strip (AG5043-1190), 5 fittings (3.2 mm)

CrossLab Solvent Bottles and Waste Cans for HPLC, Agilent Technologies - 5043-1337, Waste can, HDPE, 10 L, with S60 thread

PUMP HEAD HOLDER - 5043-1400

Crosslab Benchtop for HPLC, Agilent Technologies - 5043-1750, InfinityLab shelf assembly. Can be used on Flex Bench, Benchtop and Flex Bench MS

CrossLab Solvent Inlet Tubing and Filters for HPLC, Agilent Technologies - 5043-1790, Solvent lines for bottle head caps, 228 cm long with premounted 1/4-28 PEEK fitting

InfinityLab Well Plates, Agilent Technologies - 5043-9308, 96-well plate

InfinityLab Well Plates, Agilent Technologies - 5043-9309, 96-well plate

InfinityLab Well Plates, Agilent Technologies - 5043-9313, 96-well plate

InfinityLab Well Plates, Agilent Technologies - 5043-9314, 96-well plate

InfinityLab Well Plates, Agilent Technologies - 5043-9315, 96-well plate

MAT 96 RD PRE-SLITTED SILICONE PK100 - 5043-9318, Sealing mat, 96 wells, round, preslitted

MAT 384 SQ PRE-SLITTED SILICONE PK50 - 5043-9320, Sealing mat, 384 wells, square, preslitted

TCD PRESSURE CHECK PLUG - 5060-9055

CrossLab In-line Gas Purifiers, Agilent Technologies - 5060-9084, 40 cc, Moisture trap, conditioned molecular sieve, ¹/8 IN., S-shaped, 0.1 ppm substance concentration

CrossLab In-line Gas Purifiers, Agilent Technologies - 5060-9096, 40 cc, Hydrocarbon trap, ¹/8 IN., S-shaped

Crosslab GC Fittings, Agilent Technologies - 5061-3303, Fitting, male, ¹/16 IN. stainless steel

CrossLab Capillary and Tubing Kits for HPLC, Agilent Technologies - 5061-3304, Capillary tubing kit, flexible, stainless steel

APG REMOTE CABLE - 5061-3378

CrossLab Macrocells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3384, Rectangular macro cell, open top with PTFE lid supplied

CrossLab Macrocells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3385, Rectangular macro cell, open top with PTFE lid supplied

CrossLab Macrocells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3386, Rectangular macro cell, open top with PTFE lid supplied

Accessories for 8453 UV-Vis Cuvettes, Agilent Technologies - 5061-3388, Spacer for 1 mm cell

SPACER FOR 2MM CELL (8453 + CARY UV) 1/P - 5061-3389

Accessories for 8453 UV-Vis Cuvettes, Agilent Technologies - 5061-3390, Spacer for 5 mm cell

CrossLab Semi-Microcells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3391, Rectangular semi-micro cell, open top with PTFE lid supplied, base thickness 3.2 mm, self-masking black walls

CYLINDRICAL CELL UV 100 MM 28 ML 2 PORT - 5061-3392

CrossLab Flow Through Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3396, Flow cell, rectangular aperture, M6 threaded inlet and outlet ports

CrossLab Flow Through Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3397, Flow cell, rectangular aperture, M6 threaded inlet and outlet ports

CrossLab Flow Through Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3398, Flow cell, rectangular aperture, M6 threaded inlet and outlet ports

O-RING FPD 2-009 FPM PK12 - 5061-5867

WASHERS 0.375 INCH OD 12/PK PK12 - 5061-5869

INNER WINDOW O-RING 12/PK - 5061-5886

O-RING 12/PK FLUOROELASTOMER 1239INID - 5061-5890

TUBING PTFE 5 M 1.5 MM ID - 5062-2461, Tubing

PTFE TUBING 0.7 MM ID 1.6 MM OD 5 M - 5062-2462, PTFE tubing, 1.6 mm Ext. Ø, 0.7 m Int. Ø and 5 m length

WASTE TUBING 5M 6.5MM CORRUGATED PE - 5062-2463, Waste tubing

SUPPORT RING FOR 1050 SEAL WASH OPTION - 5062-2465

AdvanceBio Amino Acid Analysis (AAA), Agilent Technologies - 5062-2478, Amino acids supplement kit (6 amino acids Sarcosine, L-Trytophan, L-Norvaline, L-Glutamine, L-Asparagine, L-4-Hydroxyproline)

PISTON SEAL VESPEL FOR HP1090 PK4 - 5062-2494, Piston seal, Vespel, for HP1090

Crosslab Ultra-Microcells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5062-2496, Rectangular ultra-micro cell, stoppered with PE stopper supplied, self-masking black walls, 2.5×2 mm aperture, 50 µl cell, z height 15 mm. Compatible with Agilent 8453/8454 and Cary 3500 UV-Vis spectrophotometers

Crosslab Vespel Ferrules for GC, Agilent Technologies - 5062-3511, Capillary ferrule, 0.8 mm Int.Ø, Vespel, 0.45 - 0.53 mm column, maximum 280 °C

Crosslab Vespel Ferrules for GC, Agilent Technologies - 5062-3513, Capillary ferrule, 0.5 mm Int.Ø, Vespel, 0.32 mm column, maximum 280 °C

Crosslab Graphite Ferrules for GC, Agilent Technologies - 5062-3516, Ferrule, 0.4 mm Int.Ø, 15% graphite/85% Vespel, 0.2 mm column

COLUMN NUT GRAPHPACK FOR CIS PK5 - 5062-3525

Crosslab Graphite/Vespel Ferrules for GC, Agilent Technologies - 5062-3538, Capillary ferrule, 0.8 mm Int.Ø, preconditioned 15% graphite/85% Vespel, 0.53 mm column, long, maximum 350 °C

Integrator Supplies and Cables, Agilent Technologies - 5062-3561, Z-fold paper, 8.5×11 IN. rolls for agilent 3397A, 3396 series II and 3396A/B/95/94

Crosslab Graphite/Vespel Ferrules for GC, Agilent Technologies - 5062-3580, Ferrule, 0.4 mm Int.Ø, 2-hole, 15% graphite/85%Vespel, 0.1 - 0.25 mm column, maximum 350 °C

Crosslab Graphite/Vespel Ferrules for GC, Agilent Technologies - 5062-3581, Ferrule, 0.5 mm Int.Ø, 2-hole, 15% graphite/85%Vespel, 0.32 mm column, maximum 350 °C

CrossLab Fittings for HPLC, Agilent Technologies - 5062-8518, Nut, male, PTFE

CrossLab Tools for HPLC, Agilent Technologies - 5062-8519, Ferrule

CrossLab Accessory Kits for HPLC, Agilent Technologies - 5062-8535, VWD waste tubing assembly

SWAGELOK FITTING PEEK LONG F/1/16IN PK10 - 5062-8541, Swagelok fitting, 1.6 mm Int.Ø, PEEK, long, for ¹/16 IN. (1.6 mm) Ext.Ø capillary

Spare Parts for CE Systems, Agilent Technologies - 5062-8544, Electrode O-ring, silicone

CrossLab Metering Device Supplies for HPLC, Agilent Technologies - 5062-8587, Piston, sapphire, 900 µl

CrossLab Column Thermostat Accessories for HPLC, Agilent Technologies - 5062-8588, Column identification RFID tag

CrossLab Gas and Liquid Sampling Valve Supplies, Agilent Technologies - 5062-9508, Replacement valve, 6-port, WE series, 400 psi/225 °C max, Nitronic 60

FITTING-VALVE 10-PORT 24-VDC - 5062-9510

10 PORT VALVE MAX TEMP 225 DEGREES C - 5062-9511

MANUAL INJECTION VALVE FOR G1328A - 5063-6502

SIEVE FOR OUTLET VALVE PK10 - 5063-6505, Sieve for outlet valve G1312-60012

Category