• 0
Shop Products $

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 14.4/44; Nut. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 15.2/30; O-Ring. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 15.2/30; Washer. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 15.2/30; Nut. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 16/35; O-Ring. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 16/35; Washer. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 16/35; Nut. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 24/40; Washer. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 24/40; Nut. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-4mm; O-Ring Type: Viton. Tip O-Ring Size: 007. Shaft O-Ring Size: 010. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-8mm; O-Ring Type: Viton. Tip O-Ring Size: 108. Shaft O-Ring Size: 110. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-12mm; O-Ring Type: Viton. Tip O-Ring Size: 110. Shaft O-Ring Size: 112. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-4mm; O-Ring Type: Kalrez. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-8mm; O-Ring Type: Kalrez. Tip O-Ring Size: 108. Shaft O-Ring Size: 110. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-12mm; O-Ring Type: Kalrez. Tip O-Ring Size: 110. Shaft O-Ring Size: 112. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-20mm; O-Ring Type: Viton. Tip O-Ring Size: 208. Shaft O-Ring Size: 210. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-20mm; O-Ring Type: Kalrez. Tip O-Ring Size: 208. Shaft O-Ring Size: 210. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KITS, GLASS STEM. To Fit Plug Size: 0-4; O-Ring Type: Viton. Tip O-Ring Size: 007. Shaft O-Ring Size: 009. Each kit contains a set of three o-rings, one for the tip and two for the barrel seal. O-ring sizes are listed in the following Chart.

Krytox G.P. Grease, 59mL (2oz) Tube. Highly inert, non-flammable grease for use with standard taper joints and glass stopcocks. Insoluble in almost all solvents except Freon 113. Demonstrated an exceptionally high degree of chemical inertness to many highly reactive chemicals.

KRYTOX FLUORINATED GREASE. LVP Grade. 2 oz. Krytox LVP. Krytox LVP grease is made with low vapor pressure fluorinated oils and is designed for use in high vacuum applications down to 10 (-2) Torr at 20[degree]C, and 10(-5) Torr at 200[degree]C.

REPLACEMENT O-RINGS, VITON. O-Ring Size: 014. Used with open-top screw caps and threaded outer joints for making grease free, vacuum tight seals on 14/10 MINUM-WARE glassware components. O-rings are color coded BROWN for easy identification. Supplied inpackages of 12 or 144 each.

REPLACEMENT CAPS WITH OPENING, MINUM-WARE. Thread Size: 8-425. Used with Viton O-Rings and threaded outer joints for making grease free, vacuum tight seals on 14/10 MINUM-WARE glassware components.

REPLACEMENT CAPS WITH OPENING, MINUM-WARE. Thread Size: 20-400. Used with Viton O-Rings and threaded outer joints for making grease free, vacuum tight seals on 14/10 MINUM-WARE glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size: 8-425. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size: 13-425. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size: 20-400. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size: 8-425. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size:13-425. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size: 20-400. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

TUBE, CONNECTING, 'T'-SHAPE. Tubing O.D; 8.0mm; O.D. of Middle Serration: 8.5mm. 'T'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

TUBE, CONNECTING, 'T'-SHAPE. Tubing O.D; 11.0mm; O.D. of Middle Serration: 11.0mm. 'T'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

TUBE, CONNECTING, 'T'-SHAPE. Tubing O.D; 12.7mm; O.D. of Middle Serration: 14.0mm. 'T'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

TUBE, CONNECTING, 'Y'-SHAPE. Tubing O.D; 8.0mm; O.D. of Middle Serration: 8.5mm. 'Y'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

TUBE, CONNECTING, 'Y'-SHAPE. Tubing O.D; 11.0; O.D. of Middle Serration: 11.0mm. 'Y'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

TUBE, CONNECTING, 'Y'-SHAPE. Tubing O.D; 12.7mm; O.D. of Middle Serration: 14.0mm. 'Y'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

Stainless Steel Spring. Stainless steel springs used to connect apparatus having hooks. Enlarged 1/4 inch ID loop at each end for easy connection to almost any size hook. Diameter of the coils is 0.190 inch. Coil Length: 18mm. 12 springs per pack.

JOINT, O-RING SEAL. I.D; 5mm; Tube O.D; 8mm. O-Ring Size: 110; Clamp Size: 12. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 7mm; Tube O.D; 10mm. O-Ring Size: 111; Clamp Size: 18. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 9mm; Tube O.D; 12mm. O-Ring Size: 112; Clamp Size: 18. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 15mm; Tube O.D; 20mm. O-Ring Size: 116; Clamp Size: 28. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 20mm; Tube O.D; 25mm. O-Ring Size: 214; Clamp Size: 35. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 25mm; Tube O.D; 30mm. O-Ring Size: 217; Clamp Size: 35. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 30mm; Tube O.D; 35mm. O-Ring Size: 223; Clamp Size: 50. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 40mm; Tube O.D; 45mm. O-Ring Size: 226; Clamp Size: 65. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 50mm; Tube O.D; 58mm. O-Ring Size: 229; Clamp Size: 75. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 75mm; Tube O.D; 80mm. O-Ring Size: 341; Clamp Size: 102. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 12mm; Tube O.D; 16mm. O-Ring Size: 116; Clamp Size: 28. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

FLOW CONTROL ADAPTER, CHROMATOGRAPHY, RODAVISS JOINT. REPLACEMENT RODAVISS COMPONENTS FOR CG-1192 THROUGH CG-1195 CHROMATOGRAPHY COLUMNS. 24/40 Loosening Ring. Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs.

LOOSENING RING, POLYAMIDE, RODAVISS. Size: 24. Split polyamide ring to enable inner and outer Rodaviss members to be pulled apart in the event of freezing. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

FLOW CONTROL ADAPTER, CHROMATOGRAPHY, RODAVISS JOINT. REPLACEMENT RODAVISS COMPONENTS FOR CG-1192 THROUGH CG-1195 CHROMATOGRAPHY COLUMNS. 45/50 Loosening Ring. Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs.

Glassblowers Hose Connection. 3 Rings. Dimensions (mm) Tubing O.D: A - 3.0, B - 8.0, C - 9, D - 16; E - 8.

Glassblowers Hose Connection, 4 Rings. Dimensions (mm) Tubing O.D: A - 5.0, B - 10.0, C - 11, D - 20, E - 10. Serrations are tooled on both ends of an 20.3 (8) length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs. tooled on both ends).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=6.5x13.0x15x20mm. No of Rings: 4; Tubing O.D; 16. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=10.0x15.0x15x20mm. No of Rings: 4; Tubing O.D; 16. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=15.0x21.0x21x22mm. No of Rings: 4; Tubing O.D; 19. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=19.0x27.0x27x22mm. No of Rings: 4; Tubing O.D; 22. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=2.5x6.5x8x20mm. No of Rings: 4; Tubing O.D; 8. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=6.0x12.0x14x26mm. No of Rings: 6; Tubing O.D; 12. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS, DIRECT SEALING. AxBxCxD=5.0x12.0x13x24mm. No of Rings: 4; Tubing O.D; 12. Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on either end of an 8in. length of tubing.

HOSE CONNECTION, GLASSBLOWERS, DIRECT SEALING. AxBxCxD=8.0x13.5x16x30mm. No of Rings: 4; Tubing O.D; 16. Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on either end of an 8in. length of tubing.

HOSE CONNECTION, GLASSBLOWERS, DIRECT SEALING. AxBxCxD=10.0x20.0x26x54mm. No of Rings: 7; Tubing O.D; 22. Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on either end of an 8in. length of tubing.

HOSE CONNECTION, GLASSBLOWERS, MICRO. AxBxCxD=3.5x8x10x18mm. No of Rings: 3; Type: Regular. Used to construct small scale apparatus. Available in direct sealing or regular style. Serrations are tooled on either end of an 8in. length of 8mm O.D.x1.5mm wall tubing.

STOPCOCK, FLUOROPOLYMER RESIN, T-BORE. Replacement Plug for CG-436 Stopcock. Bore Size: 6; Plug Size: 24/40. A: 1:5 taper fluoropolymer resin stopcock with three stems sealed 90[degree] apart. fluoropolymer resin plug has a 'T' shaped bore to connect any two or all three stems.

DISTILLING HEAD, VIGREUX, VACUUM JACKETED. Replacement Components. Replacement 4mm 'T'-Bore fluoropolymer resin Plug. Jacketed fractionation distilling head for use under vacuum. 10/18 top outer joint is for a 1in. immersion thermometer while the 10/30 joints are for a 2in. immersion thermometer.

DISTILLING HEAD, VIGREUX, VACUUM JACKETED. Replacement Components. Replacement 2mm 'T'-Bore fluoropolymer resin Plug. Jacketed fractionation distilling head for use under vacuum. 10/18 top outer joint is for a 1in. immersion thermometer while the 10/30 joints are for a 2in. immersion thermometer.

STOPCOCK, FLUOROPOLYMER RESIN, FOUR WAY. Replacement Plug for CG-443 Stopcock. Bore: 2mm; Plug Size: 15.2/30. 1:5 taper fluoropolymer resin plug has double 'V', 90 o bores to connect opposite sets of adjacent arms. Configuration of stopcock allows it to be used in system to obtain reversal of flow.

DISTILLING HEAD, SOLVENT, MODIFIED. Replacement Components. Replacement 2mm Double Oblique TFE Plug. Designed to maintain distilled solvents in an inert atmosphere. Top of main vapor tube is open and an additional vapor tube has been added to decrease risk of pressure buildup.

REPLACEMENT PLUG, TFE STEM, O-RING. Stem Complete with Control Knob. To Fit Bore: 0-20mm; O-Ring Type: Viton. Replacement TFE plug and control knob for CG-525 through CG-534 high vacuum valves. Available with a choice of Viton, Ethylene Propylene or Kalrez o-rings.

HIGH VACUUM VALVES. CG-560 VALVE, CHEM-CAP, HIGH VACUUM, 1-ARM,. Bore: 0-20mm. Valve has a single sidearm sealed at a 90[degree] angle to the barrel.

HIGH VACUUM VALVES. CG-561 REPLACEMENT PLUG. Stem Complete with Control Knob. To Fite Bore: 0-20mm. Replacement Chem-Cap plug and control knob for CG-551 through CG-560 high vacuum valves. Plug is sold complete with control knob or Chem-Cap stem only. For replacement control knobs only see CG-500.

Chem-Vacâ„¢, PTFE Stirrer Bearings, Chemglass - CG-2077-G-01, 10 mm PTFE Chem-Vacâ„¢ Stirrer Bearing

Chem-Vacâ„¢, PTFE Stirrer Bearings, Chemglass - CG-2077-G-02, 10 mm PTFE Chem-Vacâ„¢ Stirrer Bearing

Chem-Vacâ„¢, PTFE Stirrer Bearings, Chemglass - CG-2077-G-04, 10 mm PTFE Chem-Vacâ„¢ Stirrer Bearing

O-Ring. For Aqueous Valve.

WHEATON® THE WHEATON CONNECTION® Connecting Adapters with Caps, DWK Life Sciences - W125495

Retractable Coiled Cord. 26 gauge multi-strand wire with PVC insulation. Cord type must match thermocouple plug type on controller. T for blue plug. Connector: SMP. Length: 3m.

JAR MILL ROLLER BEARINGS - P06507

Accessories. Accessories for Seven-Neck Reaction Vessel Lids and Adapters, 100 mm, Chemglass - CG-1945-T-90, Replacement PTFE Plug, 0.6 cm ( 1/4 IN.) Male NPT

Accessories. Accessories for Eight-Neck Reaction Vessel Lids and Adapters, 200 mm, Chemglass - CG-1945-T-91, Replacement PTFE Plug, 1.3 cm ( 1/2 IN.) Male NPT

GASKET O-RING ORANGE SMA - SMA-GA-03

Perfluoro O-Ring, Size:010. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:013. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

O-Ring, FEP-Stainless Steel. O-ring for Chemglass reaction vessels and lids. 80mm Flange

O-Ring, Perfluoro. O-ring for Chemglass reaction vessels and lids. 60mm Flange

O-Ring, Perfluoro. O-ring for Chemglass reaction vessels and lids. 100mm Flange

O-Ring, Perfluoro. O-ring for Chemglass reaction vessels and lids.150mm Flange

O-Ring, Perfluoro. O-ring for Chemglass reaction vessels and lids. 200mm Flange

Torque Knob Only for CG-1968-Q-10 or CG-1968-Q-11

MANIFOLD SYSTEM M16 10-20L - CG-1969-M-10

Removable TFE Delivery Stem. GL-18 Thread for Detachable TFE Drip Tip, Tooled Double Ended (2 Threads) Pack of 10 Threads. Virtually eliminates the breakage of standard glass stem stopcocks. Made entirely of TFE and attaches directly to the glass thread without o-rings or other gaskets.

Viton O-Ring #006. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Category