• 0
Shop Products $

2-Port Assembly SS 45Mm Cap 10L 11 7/8In. Stainless Steel 2-Port Assembly, Material: 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. All port assemblies include a 45mm blue polypropylene, Long Tube: 11 7/8in, 45mm Cap, Size: 15L

2-Port Assembly SS 45Mm Cap 36L 12In. Stainless Steel 2-Port Assembly, Material: 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. All port assemblies include a 45mm blue polypropylene, Long Tube: 12in, 45mm Cap, Size: 36L

2-Port Assembly SS 70Mmcap 500Ml 2-1/2In. Stainless Steel 2-Port Assembly, Material: 316l stainless steel and have an electropolish finish. 2- port assemblies have siphon and vent tubes. All port assemblies include a 45mm blue polypropylene, Long Tube: 2-1/2in, 70mm Cap, Size: 500ml

3-Port Assembly SS W/ Siphon 45Mm Cap 1L. Stainless Steel 3-Port Assembly, Seam Welded with Electropolish Finish, 3-Port with Siphon, Fill & Vent Tubes, Includes: 45mm Polypropylene Cap & Silicone Gasket, Dimensions: 8 x 4 x 8 in, Size: 1L

3-Port Assembly SS W/ Siphon 45Mm Cap 3L. Stainless Steel 3-Port Assembly, Seam Welded with Electropolish Finish, 3-Port with Siphon, Fill & Vent Tubes, Includes: 45mm Polypropylene Cap & Silicone Gasket, Longest Tube: 5 7/8in At Bend, Size: 3L

3-Port Assembly SS 45Mm Cap 500Ml. Stainless Steel 3-Port Assembly, Seam Welded with Electropolish Finish, 3-Port with Siphon, Fill & Vent Tubes, Includes: 45mm Polypropylene Cap & Silicone Gasket, with 100mm Cap, Size: 500mL

3-Port Assembly SS W/ Siphon 45Mm Cap 6L. Stainless Steel 3-Port Assembly, Seam Welded with Electropolish Finish, 3-Port with Siphon, Fill & Vent Tubes, Includes: 45mm Polypropylene Cap & Silicone Gasket, Dimensions: 1/4in X 5/32in, Longest Tube: 10 1/2in At Curve, Size: 6L

3-Port Assembly SS W/ Siphon 45Mm Cap 8L. Stainless Steel 3-Port Assembly, Seam Welded with Electropolish Finish, 3-Port with Siphon, Fill & Vent Tubes, Includes: 45mm Polypropylene Cap & Silicone Gasket, Dimensions: 1/4in X 5/32in, Longest Tube: 11in, Size: 8L

3-Port Assembly SS W/Siphon 45Mm Cap 15L. Stainless Steel 3-Port Assembly, Seam Welded with Electropolish Finish, 3-Port with Siphon, Fill & Vent Tubes, Includes: 45mm Polypropylene Cap & Silicone Gasket, Dimensions: 1/4in X 5/32in, Longest Tube: 11 15/16in At Curve, Size: 15L

3-Port Assembly SS W/Siphon 45Mm Cap 36L. Stainless Steel 3-Port Assembly, Seam Welded with Electropolish Finish, 3-Port with Siphon, Fill & Vent Tubes, Includes: 45mm Polypropylene Cap & Silicone Gasket, Dimensions: 1/4in X 5/32in, Longest Tube: 12 1/8in At Bend, Size: 36L

Impeller Assembly Mc 1X2In 100-250Ml. Micro-Carrier Impeller Assembly, Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and PTFE paddle. Impeller Paddle, Dimensions: 1in x 2in, Size: 100-250ml

Impeller Assembly Mc 500Ml 1 X 3In. Micro-carrier Impeller Assembly 500mL, Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and PTFE paddle. Impeller, Paddle dimensions: 1in x 3in, Size: 500ml

Impeller Assembly Mc 1-3L 1 3/4X4 1/4In. Micro-Carrier Impeller Assembly, Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, PTFE paddle. Magnet holder: a523-207 Silicone plug: a523-200, Impeller, dimensions: 1 3/4in x 4 1/4in, size: 1-3l

3-Port Assembly SS 70Mmcap 500Ml 2-5/8In. Stainless Steel 3-Port Assembly 70mm, Size: 500ml Seam welded with electropolish finish 3-port with siphon, fill & vent tubes Includes: 45mm PP cap & silicone gasket, Dimensions: 1/4in x 5/32in Longest tube: 2 5/8in at bend Neck: 70mm, Size: 500ml

Impeller Assembly Mc 15-36L 3X10In. Micro-Carrier Impeller Assembly, Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and PTFE paddle. Dimensions: 3inx 10in, Size: 15-36L

Impeller Assembly Mc 6-8L 3X7-3/4In. Impeller assembly for micro-carrier spinner flasks. Consist of magnet holder, silicone plug, magnet, and PTFE paddle. Paddle dimensions: 3inx 7 3/4in, Impeller size: 6-8l

Air Stone Sparger 3L F/Mc Spinner Flasks. Air Stone Sparger, for MC Spinner Flasks, Includes 45mm polypropylene cap and white silicone gasket. 316L Stainless Steel 32 Ra Finish or Better, 12mm OD Coarse Glass Frit, 0.2um Acrodisc Filter with Hose Fitting, Size: 3L

Air Stone Sparger 6-8L F/Mc Spin Flasks. Air Stone Sparger, for MC Spinner Flasks, Includes 45mm polypropylene cap and white silicone gasket. 316L Stainless Steel 32 Ra Finish or Better, 12mm OD Coarse Glass Frit, 0.2um Acrodisc Filter with Hose Fitting, Size: 6-8L

Air Stone Sparger 36L F/Mc Spin Flasks. Air Stone Sparger, for MC Spinner Flasks, Includes 45mm polypropylene cap and white silicone gasket. 316L Stainless Steel 32 Ra Finish, Od Coarse Glass Frit, 0.2um Acrodisc Filter with Hose Fitting, Size: 36L

Iob Impeller Assembly 70Mm SS 100-250Ml. IOB Impeller Assembly, Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 70mm, Paddle: 2in x 1.5in, Size: 100mL - 250mL

Iob Impeller Asby 100Mm SS 500Ml 2X2In. IOB Impeller Assembly, Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 100mm, Paddle: 2in x 2in, Size: 500ml

Iob Impeller Assembly 100Mm SS 1L 4X3In. IOB Impeller Assembly, Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. For use with bellco 1965-series standard and water jacketed spinner flasks. Cap size: 100mm Flask size: 1l

Iob Impeller Asby 70Mm SS 500Ml 2X2In. IOB Impeller Assembly, Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. For use with bellco 1965-series standard and water jacketed spinner flasks, Cap size: 70mm, Flask size: 500ml

Iob Impeller Assembly 100Mm SS 3L 2X2In. IOB Impeller Assembly, Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. For use with bellco 1965-series standard and water jacketed spinner flasks, Cap size: 100mm, Paddle: 4in X 3in, Length: 10 1/2in, Flask size: 3l

Iob Impeller Assembly SS 6L 10 1/2In. IOB Impeller Assembly, Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. For use with bellco 1965-series standard and water jacketed spinner flasks. Paddle: 6 3/4in X 5in, Length: 10 1/2in, Cap size: 100mm, Flask size: 6l

Iob Impeller Assembly SS 8L 6-3/4X5In. IOB Impeller Assembly, Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. For use with bellco 1965-series standard and water jacketed spinner flasks. Paddle: 6 3/4in X 5in, Cap size: 100mm, Flask size: 8l

Iob Impeller Assembly SS 15L 9-1/2X6In. IOB Impeller Assembly, Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. For use with bellco 1965-series standard and water jacketed spinner flasks. Paddle: 9 1/2in X 6in, Cap size: 100mm, Flask size: 15l

Iob Impeller Assembly SS 36L 9-1/2X6In. IOB Impeller Assembly, Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. For use with bellco 1965-series standard and water jacketed spinner flasks. Paddle: 9 1/2in X 6in, Cap size: 100mm, Flask size: 36l

Glass Impeller Shaft 15-36L F/Spin Flask. Glass Impeller Shaft, Material: Type 1 class a Borosilicate glass. For spinner flasks 3l to 36l, Dimensions: 9mm x 500mm long, Dimensions: 2 x 2 x 20 in

Impeller Shaft Boro 6-8L 9Mm X 400Mm. Glass Impeller Shaft, Material: Type 1 class a Borosilicate glass. For spinner flasks 3l to 36l Dimensions: 9mm x 400mm long, Dimensions17 x 1 x 0.5 in

Impeller only Ball Glass W/ Cap 100 Ml. Ball Impeller only, Glass ball houses a magnet for gentle agitation of micro-carrier beads, Specially formed bottom indent prevents accumulation under the impeller, Cap Size: 70mm, Size: 100mL

Impeller only Ball Glass W/ Cap 250 Ml. Ball Impeller only, Glass ball houses a magnet for gentle agitation of micro-carrier beads, Specially formed bottom indent prevents accumulation under the impeller, Cap Size: 70mm, Size: 250mL

Impeller only Ball Glass W/ Cap 500 Ml. Ball Impeller only, Glass ball houses a magnet for gentle agitation of micro-carrier beads, Specially formed bottom indent prevents accumulation under the impeller, Cap Size: 70mm, Size: 500mL

Impeller only Ball Glass W/ Cap 1000 Ml. Ball Impeller only, Glass ball houses a magnet for gentle agitation of micro-carrier beads, Specially formed bottom indent prevents accumulation under the impeller, Cap Size: 70mm, Size: 1000mL

Impeller only Ball Glass W/ Cap 3000 Ml. Ball Impeller only, Glass ball houses a magnet for gentle agitation of micro-carrier beads, Specially formed bottom indent prevents accumulation under the impeller, Cap Size: 70mm, Size: 3000mL

Impeller only Ball Glass W/ Cap 6-8 L. Ball Impeller only, Glass ball houses a magnet for gentle agitation of micro-carrier beads, Specially formed bottom indent prevents accumulation under the impeller, Cap Size: 70mm, Size: 6-8 litre

Impeller Assembly Glass PTFE Magnet 25Ml. Impeller Assembly, Glass shaft impeller assembly for 1967-style hanging bar spinner flask. Consist of PTFE magnet holder and PTFE coated magnet, Weight: 16 oz, Size: 25ml, Dimensions: 9 x 5 x 1 in

Impeller Assembly PTFE Magnet 50-500Ml. Impeller Assembly, Glass Shaft PTFE Magnet, for 1967-style hanging bar spinner flask. Consist of PTFE magnet holder and PTFE coated magnet, Size: 50-500ml

Impeller Assembly PTFE Magnet 1-3 L. Impeller Assembly, Glass Shaft PTFE Magnet, for 1967-style hanging bar spinner flask. Consist of PTFE magnet holder and PTFE coated magnet, Size: 1-3 l

Impeller Assembly PTFE Magnet 15-36 L. Impeller Assembly, Glass Shaft PTFE Magnet, for 1967-style hanging bar spinner flask. Consist of PTFE magnet holder and PTFE coated magnet, Size: 15-36 l

Shaft Impeller Borosilicate Glass 100Ml. Impeller Shaft, Material: Type 1 Class A Borosilicate Glass, Size: 100 ml, Weight: 20 oz, Dimensions: 0.5 x 0.5 x 0.5 in

Shaft Impeller Borosilicate 238Mm 3 L. Impeller Shaft, Material: Type 1 Class A Borosilicate Glass, Size: 3 l, 238 mm, Weight: 32 oz

Shaft Impeller Borosilicate 100-250Ml. Impeller Shaft, Type 1 Class A Borosilicate Glass, Size: 250 ml, Dimension: 7mm OD X 155mm Long

Shaft Impeller Borosilicate Glass 500 Ml. Impeller Shaft, Type 1 Class A Borosilicate Glass, Size: 500mL, Dimension: 7mm OD X 190mm Long

Shaft Impeller Borosilicate Glass 1 L. Impeller Shaft, Type 1 Class A Borosilicate Glass, Size: 1 L, Dimension: 7mm OD X 230mm Long

Shaft Impeller Borosilicate Glass 3 L. Impeller Shaft, Type 1 Class A Borosilicate Glass, for spinner flasks 3L to 36L, Weight: 32 oz, Size: 7mm X 300mm Long, Dimensions: 12 x 1 x 0.5 in

Assembly 3-Port SS 1 L for Media Bottle. Assembly 3-Port, Tube Specifications: 1/4 OD X 5/32in ID, 316 L Stainless Steel Ra 32 Finish Or Better, Siphon (Long Tube): 7 19/64 in Long Below Cap Slug, Fill Tube: 3in Long Below Cap Slug, Vent Tube: 1in Long Below Cap Slug, size: 1 l

3-Port Assembly SS 2 L for Media Bottle. 3-Port Assembly, Material: 316 L Stainless Steel, designed for use with media storage bottles for adding and withdrawing media, supplied with a 45mm polypropylene blue open top screw cap and white silicone gasket, Size: 2 l

3-Port Assembly SS 5 L for Media Bottle. 3-Port Assembly, Material: 316 L Stainless Steel, designed for use with media storage bottles for adding and withdrawing media, supplied with a 45mm polypropylene blue open top screw cap and white silicone gasket, Size: 5 l

3-Port Assembly SS 10 L for Media Bottle. 3-Port Assembly, Material: 316 L Stainless Steel, designed for use with media storage bottles for adding and withdrawing media, supplied with a 45mm polypropylene blue open top screw cap and white silicone gasket, Size: 10 l

2-Port Assembly Schott 32Mm for Flask. Schott 2-Port Assembly, 316 L Stainless Steel Construction, Polypropylene Screw Cap, White Silicone Gasket, Long Tube Extends 25mm Below Cap Slug, Short Tube Extends 25mm Above Cap, for use on small ID 32mm side arms for spinner flask vessels, Size: 32mm

Shaft High Speed Impeller 36L.

Septum Port Asby 316 L 13Mm Sil Septum. Septum Port Assembly 12mm, 316 L Stainless Steel Septum Assembly, Ra 32 Finish Or Better, 13mm Silicone Septum, Fits 18mm Port In 3, 7 And 15L Stainless Steel Headplates

Metric Drive Stem Assembly 3L Mag Motor. Metric Drive Stem Assembly 3L for Mag Motor, for use with 3L marine and pitched blade impellers. Fits into 27 mm center port of 3L metric headplate. 316 L Stainless Steel, Ra 32 Finish Or Better, 3/4in OD Shaft

Water Jacketed Split Ring Collar Asby 3L. Water Jacketed Split Ring Collar Assembly, Vessel stand for 3L water jacketed metric bioreactor vessel has unique split ring design to fit around jacket and hose barbs. Aluminum And Stainless Steel Construction, Size: 3L

Rushton Impeller Assembly 3L. Rushton Impeller Assembly, Ra32 Finish Or Better, with 6 vertical blades equally spaced around the center hub. Designed for high speed fermentation protocols. Assembled onto 3L metric bioreactor drive stem. 2in OD, Size: 3L

Tube Assembly Metric 3-Port F/18Mm Port. Metric 3-Port Tube Assembly for 18mm Port, Stainless Steel Inlet Assembly Has Three 1/8in Tubes, Fits Into 18mm Port On 3LAnd 7L Metric Headplates. 316L Stainless Steel Construction Ra 32 Finish Or Better, Silicone O-Ring

Metric Condenser Assembly 316L SS 3L. Metric Condenser Assembly, condenser mounted externally has internal baffle for efficient condensation of vapor into liquid for return to bioreactor vessel. Fits 18mm port on 3L metric headplate. 316L SS, 1/4GC| Hose Barb Connections, Size: 3L

Pipe Assembly Angled Harvest 316L SS 3L. Angled Harvest Pipe Assembly Large Volume, 12mm harvesting pipe with 90 degree angle for sampling contents in 3L bioreactor vessel. Fits 18mm port on 3L metric headplate. 316L Stainless Steel, Ra 32 Finish or Better, 3L

Cooling Finger Assembly 316L SS 18Mm 3L. Cooling Finger Assembly, cooling finger with internally placed water in and water out tubes that help to maintain internal bioreactor temperature. Fits into 18mm port on 3L metric headplate. 316L Stainless Steel, Size: 3L

Rh Pitch Blade Impeller 316L SS 2In 3L. RH Pitch Blade Impeller, Pitch blade impeller with right hand oriented blades 2GC|. Assemble one or more impellers onto 3L drive shaft for mammalian cell culture. 2GC| OD, 316L SST, Electropolish Finish Ra 32, for 3L Systems, For1/2GC| Shafts, 2in, Size: 3L

Compression Fitting Asby 1/8 F/10Mm Port. Compression Fitting Assembly 1/8 for 10mm Port, compression fitting with 1/8in pipe included, Fits into 10mm port and a 3L metric headplate. 316l Stainless Steel, Size: 1/8in Pipe, Fits 10mm Port & 3l Metric Headplate

L-Shape Sparger W/ SS Frit 3L 10Mm Port. L-Shape Sparger w/ Stainless Steel Frit 3L for 10mm Port, 316L Stainless Steel, Finish Ra 32 Or Better Inside And Out, Overall Length 11 3/16GC|, Insertion Length 9 3/4GC|, Supply Complete With O-Ring And SST Washer And Nut, SST Filter 10um

L-Shape Sparger W/ Holes SS 3L 10Mm Port. L-Shaped Sparger w/ Holes 3L for 10mm Port, Fits into 10mm port on 3L metric headplate. 316L Stainless Steel, Finish Ra 32 Or Better Inside And Out, Overall Length 11 3/16GC|, Insertion Length 9 3/4GC|, Stainless Steel Filter 10um

Lh Pitch Blade Impeller 316L SS 2In 3L. LH Pitch Blade Impeller 2in 3L, with left hand oriented blades 2In OD. Assemble one or more impellers into 3L drive shaft for mammalian cell culture. 316l Stainless Steel, Electropolished, Ra32 Finish Or Better, Fits 1/2In Shafts

Impeller Rh Pitch Blade 316L 2 3/4In 7L. RH Pitch Blade Impeller 2 3/4in, with Right Hand Oriented Blades, Assemble One Or More Impellers Onto 7l Drive Shaft for Mammalian Cell Culture. 316l Stainless Steel Construction, Ra Finish 32 Micro Inch Or Better, 2.75GC| Od. 7L

Impeller Lh Pitch Blade 316L 2 3/4In 7L. LH Pitch Blade Impeller 2 3/4in, with Left Hand Oriented Blades, Assemble One Or More Impellers Onto 7l Drive Shaft for Mammalian Cell Culture. 316l Stainless Steel Construction, Ra Finish 32 Micro Inch Or Better, 2.75GC| Od. 7L

Rushton Impeller Assembly 316 L SS 7L. Rushton Impeller Assembly, with 6 vertical blades equally spaced around the center hub. Designed for high speed fermentation protocols. Assembled onto 3L metric bioreactor drive stem. 316 L Stainless Steel, Ra32 Finish Or Better, 2GC| Od, Size: 7L

Collar Assembly Wtr Jacket Split Ring 7L. Water Jacketed Split Ring Collar Assembly, for 3L water jacketed metric bioreactor vessel has unique split ring design to fit around jacket and hose barbs. Material: Aluminum & Stainless Steel, Size: 7L

L-Shape Sparger W/Ss Frit 7L 11 3/16In. L-Shape Sparger w. Stainless Steel Frit, 316l Stainless Steel, Finish Ra 32 Or Better Inside And Out, Overall Length 11 3/16GC|, Insertion Length 9 3/4GC|, Supply Complete With O-Ring And Stainless Steel Washer And Nut, Stainless Steel Filter 10um

L-Shape Sparger W/ Holes 7L F/10Mm Port. L-Shaped Sparger w/ Holes 7L for 10mm Port, 316l Stainless Steel, Finish Ra 32 Or Better Inside And Out, Overall Length 11 3/16GC|, Insertion Length 9 3/4GC|, Supply Complete With O-Ring And Stainless Steel Washer And Nut, Stainless Steel Filter 10um

Marine Impeller Lh Sst 3/8In Bore 3In. Stainless Steel Marine Impeller LH 3/8GC| Bore, Single or multiple blade fit onto drive shaft of 3L and 7L motor drive assembly for mammalian cell culture. Size: 3/8in

Marine Impeller Rh Sst 3/8In Bore 3In. Stainless Steel Marine Impeller RH 3/8GC| Bore, Single or multiple blade fit onto drive shaft of 3L and 7L motor drive assembly for mammalian cell culture. Size: 3/8in

Ring Sparger 316L 15L for 15L Bioreactor. Ring Sparger for 15 liter Bioreactor Vessel. 316 L Stainless Steel, Electropolish Finish of 32ra Or Better, for 18mm Port In Headplate, Length,375GC| Od, Insertion Length, 16.364GC|, (16) 0.063 Holes

L-Shape Sparger W/ SS Frit 15L 10Mm Port. L-Shape Sparger w/ Stainless Steel Frit 15L for 10mm Port, with 10 micron porosity, 316l Stainless Steel, Finish Ra 32 Or Better Inside And Out, Overall Length 11 3/16GC|, Insertion Length 9 3/4GC|, Stainless Steel Filter 10um

L-Shape Sparger W/ Holes 15L 10Mm Port. L-Shaped Sparger w/ Holes 15L for 18mm Port, 316l Stainless Steel, Finish Ra 32 Or Better Inside And Out, Overall Length 11 3/16GC|, Insertion Length 9 3/4GC|, Supply Complete With O-Ring And Stainless Steel Washer And Nut, Stainless Steel Filter 10um

Rushton Impeller Assembly 15L. Rushton Impeller Assembly, with 6 vertical blades equally spaced around the center hub. Assembled onto 3L metric bioreactor drive stem. 316 L Stainless Steel, Ra32 Finish Or Better, 2GC| Od, Size: 15L

Rh Pitch Blade Impeller SS 3-1/2In 15L. RH Pitch Blade Impeller, Material: 316l Stainless Steel With Ra Finish of 32 Or Better, Dimensions: 3 1/2GC| X 2 3/16GC|, Right Hand Pitch, 3 1/2in, Size: 15L

Lh Pitch Blade Impeller SS 3-1/2In 15L. LH Pitch Blade Impeller, 3 1/2GC| 15L

Marine Impeller Rh W/ 1/2In Bore SS 3In. Stainless Steel Marine Impeller RH w/ 1/2GC|bore, with 3GC|OD and left oriented blades. Single or multiple blade fit onto drive shaft of 3L and 7L motor drive assembly for mammalian cell culture

Marine Impeller Lh W/ 1/2In Bore SS 3In. Stainless Steel Marine Impeller LH w/ 1/2GC|bore, with 3GC|OD and left oriented blades. Single or multiple blade fit onto drive shaft of 3L and 7L motor drive assembly for mammalian cell culture

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104470, APLW 000 Upper basket for laboratory glassware such as beakers Useable surface: 485×525 mm

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104480, APLW 001 Load carrier for laboratory glassware, such as beakers Useable surface: 490×540 mm

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104490, APLW 002 Load carrier for bottles (5 and 10 L), large Erlenmeyer flasks Up to 4 items, Ø max. 240 mm Up to 5 items, Ø max. 190 mm

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104500, APLW 003 Load carrier for bottles (up to 20 L), large Erlenmeyer flasks Up to 2 items, Ø max mm 280

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104510, APLW 004 Load carrier for bottles, max. 50 L

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104520, APLW 005 Load carrier for pipettes (max. 56) Max. pipette length: 760 mm on PLW 6111 Max. pipette length: 535 mm on PLW 6011

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104530, APLW 006 Load carrier for pipettes (max. 121) Max. pipette length: 470 mm on PLW 6011 Max. pipette length: 620 mm on PLW 6111

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104540, APLW 007 Load carrier for pipettes (reprocessing in 2 cartridges), Max. pipette length: 520 mm

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104550, APLW 008 Load carrier for pipettes (reprocessing in 3 cartridges)

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104570, APLW 010 Upper basket with 156 injectors, Ø max. 32 mm, only for 2.5 mm Ø nozzles

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104580, APLW 011 Upper basket with 110 injectors, Ø max. 40 mm, only for 2.5 mm Ø nozzles

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104590, APLW 012 Upper basket with 84 injectors, Ø max. 35 mm, only for 2.5 mm Ø nozzles

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104600, APLW 013 Upper basket with 42 injectors, Ø max. 70 mm

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104610, APLW 013/1 Upper basket with 42 injectors, Ø max. 70 mm, Max. height: 160 mm, incl. nozzles 42×APLW 051

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104620, APLW 013/2 Upper basket with 10 + 32 injectors, Ø max. 70 mm, height max. 200 - 300 mm, incl. nozzles 32×APLW 051, 10×APLW 055

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104630, APLW 014 Upper basket with 20 injectors, Ø max. 100 mm

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104640, APLW 014/1 Upper basket with 20 injectors, Ø max. 100 mm, height max. 230 mm, incl. nozzles 20×APLW 055

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104650, APLW 015 Upper basket with 16 injectors, Ø max. 110 mm

Accessories for Model PLW 6111 Slimline Laboratory Glassware Washers, Miele - 11104660, APLW 016 Upper basket with 27 injectors, Ø max. 75 mm

Category