• 0
Shop Products $

Acrylic tray for lab supplies-1/4inch clear acrylic 12w x 6.5h x 10d.

Acrylic tray for lab supplies - 1/4 inch, clear acrylic 18w x 8h x 15d.

Poxygrid, TUBE HOLDER, SINGLE, 50ML. This holder solves the problem of where to put a single 50ml conical tube where it will not roll or spill.

Drum Pumps, Bürkle - 5600-0801

Accessories for Draining Racks, Bürkle - 9640-0410, Rods, PP

Accessories for Draining Racks, Bürkle - 9640-0415, Rods, PP

Accessories for Draining Racks, Bürkle - 9640-0421, Rods, PP

Wall Mounted Draining Racks, Bürkle - 9640-1040, With 5 rods, 26 rods, 2 rods

Wall Mounted Draining Racks, Bürkle - 9640-1050, With 10 rods, 39 rods, 4 rods

Benchtop Draining Racks, Bürkle - 9640-3040, Flexible, PVC, with PP rods

Benchtop Draining Racks, Bürkle - 9640-3050, Flexible, PVC, with PP rods

Burets, Automatic, Dr Schilling Pattern, Schellbach, Bürkle - 9695-1005, 5 ml

Burets, Automatic, Dr Schilling Pattern, Schellbach, Bürkle - 9695-1010, 10 ml

Burets, Automatic, Dr Schilling Pattern, Schellbach, Bürkle - 9695-1015, 15 ml

Burets, Automatic, Dr Schilling Pattern, Schellbach, Bürkle - 9695-1025, 25 ml

Burets, Automatic, Dr Schilling Pattern, Schellbach, Bürkle - 9695-1050, 50 ml

Accessories for Zone Samplers, Bürkle - 5317-0033, Emptying funnel, separate, V2A

LaboPlast® Stopcock, Bürkle - 0525-3000, Stopcock Straight- Through

LaboPlast® Stopcock, Bürkle - 0525-5000, Stopcock Straight- Through

LaboPlast® Stopcock, Bürkle - 0525-7000, Stopcock Straight- Through

Disposable smartspatulas, Macro, Green, 310mm, Pack of 150, Polypropylene.

Disposable smartspatulas, Standard blue, 210mm, Pack of 300, Polypropylene.

Polyethylene Molds - Individual - 19 x13 mm. These individual polyethylene molds can be used with EBH2 Block Holders and are suitable for JB-4, JB-4-Plus, Immuno-Bed, LR White, LR Gold or Paraffin embedding. 100 per pack

DuraSeal® Sealing Film, Diversified Biotech - DS12-250, Sealing Film

Septum, GL32 cap, silicone/PTFE, pk/10.

Septum, GL18 cap, silicone/PTFE, pk/10.

Septum, GL25 cap, silicone/PTFE, pk/10.

Septum, GL14 cap, silicone/PTFE, pk/10.

Double sided carbon tape. 8mm.

Polyester drain discs, 37 mm, PE, 100/pk. For use with membrane hardware where extra support is needed for improved flow rate and throughput. Binder free.

Polyester drain discs, 22 mm, PE, 100/pk. For use with membrane hardware where extra support is needed for improved flow rate and throughput. Binder free.

Funnel Analytical PP 65mm cs20. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Analytical PP 50mm cs20. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Analytical PP 35mm cs20. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Powder PP 180mm cs5. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock

Funnel Powder Pp 150mm cs10. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock

Funnel Powder PP 120mm cs10. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock

Funnel Powder PP 100mm cs20. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock

Funnel Powder Pp 80mm cs20. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock

Funnel Powder PP 60mm cs20. These heavy-duty polypropylene (PP) powder funnels feature a large bore, which make them ideal for use with powder, large particles and viscous liquids, External ribbing is molded into the funnel to prevent air lock

Funnel Analytical PP 180mm cs5. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Analytical PP 120mm cs10. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel, Analytical PP 150mm cs5. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Analytical PP 100mm cs10. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Funnel Analytical PP 80mm cs20. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids,

Analytical Funnel PP 25mm cs20. These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids

Adapter set. LaboPlast adapter set, Includes: Thread adapter 3/4in, Thread adapter 3/4in - Kautex, Thread adapter 3/4in - cylindrical R 3/4in barrel thread, Thread adapter 3/4in - conical R 3/4in barrel thread, Hexagonal key for thread adapter, All adapters have a standard outer thread R 3/4in

Test Tube, 12 x 86mm (5mL), PS, with Rim, Polystyrene tubes can withstand 1500 RPM during centrifugation

Burette. Splinter-proof titrating burette, made of borosilicate glass 3.3, Shatter-proof, resistant to chemicals, Sturdy stand, Precise discharge jet, allowing very fine drops. Burette capacity: 15 ml, Division: 0.1 ml, Precision: +/-0, 045 ml, Height: 52 cm, Capacity: 0.5 l

Burette. Splinter-proof titrating burette, made of borosilicate glass 3.3, Shatter-proof, resistant to chemicals, Sturdy stand, Precise discharge jet, allowing very fine drops. Burette capacity: 25 ml, Division: 0.05 ml, Precision: +/- 0, 045 ml, Height: 65 cm, Capacity: 1 l

Spatula. VWR Spatula, standard, disposable, sterile, Material: Polypropylene, Length: 210 mm, Color: Opaque, Ethylene Oxide Sterilized, endotoxin Free/Non-Pyrogenic

FLASKUP, FLASK HOLDER, PP, 250ML. Unique flask holders are molded from glass filled polypropylene, are durable and easy to clean.

CLAMP, PP, BURETTE, SINGLE. These non-corroding, polypropylene burette clamps do not obscure graduations. Burette is held firmly in place by rubber pads and a concealed steel spring. Center clamp tightens to a standard support rod; 12.5mm (1/2) and 9.5mm (3/8) bushings included. 12 per case.

FLASKUP, FLASK HOLDER, PP, 500ML. Unique flask holders are molded from glass filled polypropylene, are durable and easy to clean.

TRAY, LDPE, 21-1/2X25-1/2X4, WITH FAUCET. Molded low-density polyethylene trays are rugged, long-lasting, and corrosion-resistant.

RACK, PP, ROUND FLOATING, 8PLACES, WHITE, 4/PKG. Even when fully loaded, tubes are completely immersed while tops rest above the rack, floating in a beaker of water.

SCOOP, PP, 6/PKG, 24/CASE. Rectangular shape molded of rigid polypropylene.

Rectangular Polyethylene Bottle Carrier. For 8 bottles. Without partitions. Measures 36x18x15cm deep inside with 25.4mm diameter handle.

SCRAPER, NYLON, RIGID. Molded of glass-reinforced polyimid nylon, scraper is 63mm (2-7/16) wide with a 140mm (5-1/2) long flat blade. The straight, chisel-type 63mm wide scraping edge may be resharpened. Overall length is 286 mm (11-1/4).

PADDLE, HDPE, STIRRING, 3'HANDLE. For mixing liquids in large vats and tanks, these larger HDPE paddles are 76x152mm (3x6) with 25mm (1) diameter handles. With 91cm (3 ft) handle.

Round Polypropylene Tray. 25.4cm diameter, 7.6cm depth. Heavy-walled 4.8mm. Corrosion-resistant and autoclavable.

SPILL TRAY POLYPROPYLENE 6L - CG-1988-01

SPILL TRAY POLYPROPYLENE 37L - CG-1988-02

SPILL TRAY POLYPROPYLENE 37L - CG-1988-03

Y Connector. Length: 12.7mm (1/2). Autoclavable, polypropylene. 12 per bag. 6 bags per case.

Y Connector. Length: 9.5mm (3/8). Autoclavable, polypropylene. 12 per bag. 6 bags per case.

Y Connector. Length: 8mm (5/16). Autoclavable, polypropylene. 12 per bag. 6 bags per case.

Y Connector. Autoclavable, polypropylene. 4.7mm (3/16).

RACK, PP, ROUND FLOATING, 20PLACES, WHITE, 4/PKG. Even when fully loaded, tubes are completely immersed while tops rest above the rack, floating in a beaker of water.

NALGENE Large Square Bottle, Polypropylene, Wide Mouth. 4L bottle is ideal for storing and sterilizing contaminated slides and other small lab items. Bottle features molded-in handgrips and comes with a 100mm polypropylene cap. Not leakproof. Autoclavable.

NALGENE Square Media Bottles, PETG, Sterile, Graduated. 60mL. Graduated Range: 10-60mL. Interval: 10mL. Transparency and reduced permeability to CO2/O2 allow media storage up to 6 months. Bottle and cap are radiation sterilized. 24mm cap included. Not autoclavable.

Laboratory Carrier, HDPE, non sterile. Reduces breakage and spillage when transporting glass and plastic bottles. Two foam inserts with six holes (consisting of removable circular sleeves) keep bottles separated. Remove concentric foam sleeves to accommodate up to six bottles with 2-3/8-in.

Nalgene Polypropylene Filling/Venting Closures, Thermo Scientific. Ready to accept additional fluid transfer components such as aseptic connectors and air vent filters, closures are specifically designed to mate with most nalgene bottles and carboys, leakproof systems for secure.

Poxygrid, RACK, B.O.D.BOTTLE. These racks have 12 places (3 x 4 rows) for 300 ml Biological ottles.

Nalgene Barbed Bulkhead Fittings, Thermo Scientific. Promote the customization of most nalgene bottles and carboy closures for aseptic transfer of liquids, includes a set of 2 panel mount barbed fittings, kits include instructions and templates, and polypropylene fittings.

Snap Cap, Polyethylene. Size: 5. Replacement for 200, 250, and 500mL KIMAX volumetric flasks.

Covers. Nonsterile. For SCIENCEWARE 96-Well Plates, Deepwell. Polypropylene. Designed for serial dilution procedures. Can separate each well with a sealing ring, reducing cross-contamination. Feature a standard footprint. Compatible with robotic work stations.

VWR Wash Bottle Carrier. Sturdy, lightweight polypropylene carrier holds up to six wash bottles. Its secure handle provides comfort and control. Autoclavable and chemical-resistant. Holds both 237mL and 473mL bottles. Dimensions: 28.6Lx19.4Wx22.5Hcm.

Polypropylene Bucket. Can be autoclaved or gas sterilized. Durable enough for handling photographic chemicals and most corrosive liquids. Nylon-coated wire bail handle. Do not sterilize with radiation or dry heat. Not suitable for strong alkalis. White. Capacity 10L.

Nalgene Graduated Bucket, White High-Density Polyethylene, Thermo Scientific. Extra heavy, molded, polyethylene coated, bail handle and wide-lipped pour spout for easy handling and pouring, graduated in pints and liters.

Nalgene Air-Tight Pails, Low-Density Polyethylene, Thermo Scientific. Close fitting, airtight covers make these pails useful for specimens, storage and general utility, handle is a nylon-coated wire bail, lids are white

Nalgene Air-Tight Pails, Low-Density Polyethylene, Thermo Scientific. Close fitting, airtight covers make these pails useful for specimens, storage and general utility, handle is a nylon-coated wire bail, lids are white

Drying Tubes with Fittings. Unbreakable polyethylene straight tubes, 16mm I.D. x 19mm O.D. (5/8x 3/4). Each tube is supplied with two polypropylene fittings which accept 6.4 to 9.5mm (1/4 to 3/8) I.D. tubing. Drying agent not included.

Hand Scraper, Polypropylene. Scraper is ideal for countertops, walls, and floors, and will not scratch stainless steel surfaces. Scraper is unaffected by water, acids, solvents, and sanitizers. FDA and USDA approved. Sterilizable. Width is 11cm. Length is 24.8cm.

Cube Insert for Cubitainer. 10L. Blend of linear low and low density polyethylene manufactured in a cube shape. Designed for use with a corrugated fiberboard overpack. Collapses as product is dispensed. Non-glug design assures product flows from in continuous, uninterrupted stream.

Spectra/Por Biotech Cellulose Ester(CE) Dialysis Membranes, 100000 MWCO, 10 mm. 10 mm. An Ultra High Purity and Precise Separation Dialysis Membrane. Vol/Length (ml/cm): 0.32. Dia. (mm): 6.4. Fourteen precise MWCOs ranging from 100 Daltons to 1 million Daltons.

Settlometer Jar With Cover, PC For cat#1010-0507.

Category