• 0
Shop Products $

20% RTX-1 SILCOPORT 100/120 - 80410-810

20% RTX-1 SILCOPORT 100/120 - 80410-800

Chromosorb® Diatomaceous Earth Columns (bonded stationary phase packed columns), Restek - 80409-810, 20% Rtx-1, SilcoSmooth Tubing, Agilent Configuration

Chromosorb® Diatomaceous Earth Columns (bonded stationary phase packed columns), Restek - 80409-800, 20% Rtx-1, SilcoSmooth Tubing, General Configuration

Chromosorb® Diatomaceous Earth Columns (bonded stationary phase packed columns), Restek - 80405-810, 10% Rtx-1, SilcoSmooth Tubing, Agilent Configuration

COL .19%PIC 1/8IN2MM GENCONFIG - 80311-800

CarboBlack Columns (packed), Restek - 80305-800, 1.5% XE-60/1% H3PO4, SilcoSmooth Tubing, General Configuration

CarboBlack Columns (packed), Restek - 80211-810, 3% Rt-1500, SilcoSmooth Tubing, Agilent Configuration

CarboBlack Columns (packed), Restek - 80211-800, 3% Rt-1500, SilcoSmooth Tubing, General Configuration

CarboBlack Columns (packed), Restek - 80206-810, 1% Rt-1000, SilcoSmooth Tubing, Agilent Configuration

CarboBlack Columns (packed), Restek - 80206-800, 1% Rt-1000, SilcoSmooth Tubing, General Configuration

CarboBlack Columns (packed), Restek - 80205-810, 0.1% Rt-1000, SilcoSmooth Tubing, Agilent Configuration

Chromosorb® Diatomaceous Earth Columns (non-bonded stationary phase packed columns), Restek - 80129-800, 5% Rt-1200/5% Bentone 34, SilcoSmooth Tubing, General Configuration

COLMN 5%KRYTOX 3M 2.1MM NICKEL - 80127-810

CarboBlack Columns (packed), Restek - 80127-800, 5% Krytox (Ni 200 tubing), Nickel 200 Tubing, General Configuration

Chromosorb® Diatomaceous Earth Columns (non-bonded stationary phase packed columns), Restek - 80125-800, 5% Rt-1200/1.75% Bentone 34, SilcoSmooth Tubing, General Configuration

COL .2%CBWAX 1/8 2MM HP5880 - 80122-810

CarboBlack Columns (packed), Restek - 80122-800, 0.2% Carbowax 1500, SilcoSmooth Tubing, General Configuration

CarboBlack Columns (packed), Restek - 80121-800, 0.2% Carbowax 1500, SilcoSmooth Tubing, General Configuration

CarboBlack Columns (packed), Restek - 80107-810, 6.6% Carbowax 20M, SilcoSmooth Tubing, Agilent Configuration

CarboBlack Columns (packed), Restek - 80107-800, 6.6% Carbowax 20M, SilcoSmooth Tubing, General Configuration

CarboBlack Columns (packed), Restek - 80106-810, 5% Carbowax 20M, SilcoSmooth Tubing, Agilent Configuration

CarboBlack Columns (packed), Restek - 80106-800, 5% Carbowax 20M, SilcoSmooth Tubing, General Configuration

CarboBlack Columns (packed), Restek - 80105-810, 5% Carbowax 20M, SilcoSmooth Tubing, Agilent Configuration

CarboBlack Columns (packed), Restek - 80105-800, 5% Carbowax 20M, SilcoSmooth Tubing, General Configuration

MXT -1701(Silcosteel ). 0.53 mm ID. 30-Meter Length. 0.50um. Ideal for the analysis of pesticides, solvents, and drugs. Unique polarity ideal for a wide variety of applications.

MXT -624 (Silcosteel ). 0.53 mm ID. 30-Meter Length. 3.00um. 105-meter column meets new CLP SOW requirements for gas separation without sub-ambient cooling. recommended for the analysis of volatile organic compounds in EPA methods.

Rtx -502.2(Fused Silica). 0.53 mm ID. 105-Meter Length. 3.00um. recommended for the analysis of volatile organic compounds in EPA methods. Sub-ambient temperature not required with 105-meter column. Specified in many GRO methods for monitoring leaking underground storage tasks.

MXT -WAX(Silcosteel ). 0.53 mm ID. 30-Meter Length. 2.00um. Ideal for fatty acid methyl ester(FAME) analysis. Similar to Omegawax column.

MXT -WAX(Silcosteel ). 0.53 mm ID. 30-Meter Length. 1.00um. Ideal for fatty acid methyl ester(FAME) analysis. Similar to Omegawax column.

MXT -50(Silcosteel ). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.83um. Ideal confirmation column for many EPA Methods.

MXT-5 (Silcosteel). 0.53mm ID. 30-Meter Length. 0.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

MXT-5 (Silcosteel). 0.28mm ID. 30-Meter Length. 0.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

MXT-5 (Silcosteel). 0.28mm ID. 15-Meter Length. 0.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

MXT-5 (Silcosteel). 0.28mm ID. 30-Meter Length. 0.25um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

MXT-2887 (Silcosteel). 0.53mm ID. 10-Meter Length. 2.65um. Exceed all performance requirements for ASTM Test Method D-2887. Crossband technology results in longer lifetimes and shorter conditioning, and allows solvent rinsing.

MXT -1 (Silcosteel). 0.53mm ID. 60-Meter Length. Temperature limits are 60 to 400[degree]C for this column. This 6-meter column is for simulated distillation. 5.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing.

MXT -1 (Silcosteel). 0.53mm ID. 30-Meter Length. Temperature limits are 60 to 400[degree]C for this column. This 6-meter column is for simulated distillation. 1.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing.

MXT -1 (Silcosteel). 0.28mm ID. 60-Meter Length. Temperature limits are 60 to 400[degree]C for this column. This 6-meter column is for simulated distillation. 0.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing.

MXT -1 (Silcosteel). 0.53mm ID. 15-Meter Length. Temperature limits are 60 to 400[degree]C for this column. This 6-meter column is for simulated distillation. 0.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing.

MXT -1 (Silcosteel). 0.28mm ID. 30-Meter Length. Temperature limits are 60 to 400[degree]C for this column. This 6-meter column is for simulated distillation. 0.25um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing.

MXT -1 (Silcosteel). 0.53mm ID. 15-Meter Length. Temperature limits are 60 to 400[degree]C for this column. This 6-meter column is for simulated distillation. 0.25um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing.

MXT -1 (Silcosteel). 0.28mm ID. 15-Meter Length. Temperature limits are 60 to 400[degree]C for this column. This 6-meter column is for simulated distillation. 0.25um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing.

MXT -1 (Silcosteel). 0.28mm ID. 30-Meter Length. Temperature limits are 60 to 400[degree]C for this column. This 6-meter column is for simulated distillation. 0.10um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing.

GC COLUMN MXT1 15M .53MM .20UM - 70108

Hydroguard Guard Columns. 0.53mm ID. 0.74 +/- 0.025mm OD. 60-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Hydroguard Guard Columns. 0.53mm ID. 0.74 +/- 0.025mm OD. 30-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Hydroguard Guard Columns. 0.53mm ID. 0.74 +/- 0.025mm OD. 10-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Hydroguard Guard Columns. 0.53mm ID. 0.74 +/- 0.025mm OD. 5-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-polarity Deactivated guard Columns. 0.53mm ID. 0.74 +/- 0.025mm OD. 5-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-polarity Deactivated guard Columns. 0.28mm ID. 0.53 +/- 0.025mm OD. 5-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Rtx -1701(Fused Silica). 0.18 mm ID. 40-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.40um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -624(Fused Silica). 0.18 mm ID. 40-Meter Length. 1.00um. 105-meter column meets new CLP SOW requirements for gas separation without sub-ambient cooling. recommended for the analysis of volatile organic compounds in EPA methods.

Rtx -502.2(Fused Silica). 0.18 mm ID. 40-Meter Length. 1.00um. recommended for the analysis of volatile organic compounds in EPA methods. Sub-ambient temperature not required with 105-meter column. Specified in many GRO methods for monitoring leaking underground storage tasks.

Rtx -502.2(Fused Silica). 0.18 mm ID. 20-Meter Length. 1.00um. recommended for the analysis of volatile organic compounds in EPA methods. Sub-ambient temperature not required with 105-meter column. Specified in many GRO methods for monitoring leaking underground storage tasks.

Rtx -50(Fused Silica). 0.18 mm ID. 20-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.20um. Ideal confirmation column for many EPA Methods.

Rtx -35(Fused Silica). 0.18 mm ID. 10-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.40um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx-5 (Fused Silica). 0.18mm ID. 40-Meter Length. 0.20um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.18mm ID. 10-Meter Length. 0.20um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Ethylene oxide Standard. 500ug/mL in dimethylsulfoxide, 1ml/ampule.

Methyl nervonate. Carbon Number: C24:1 delta 15 cis.

Methyl lignocerate. Carbon Number: C24:0.

Methyl erucate. Carbon Number: C22:1 delta 13 cis.

Methyl behenate. Carbon Number: C22:0.

Methyl arachidonate. Carbon Number: C20:4 delta 5, 8, 11, 14 cis.

Methyl eicosenoate. Carbon Number: C20:1delta 11 cis.

Methyl arachidate. Carbon Number: C20:0.

Methyl linolenate. Carbon Number: C18:3 delta 9,12,15 cis.

Methyl linoleate. Carbon Number: C18:2 delta 9,12 cis.

Methyl oleate. Carbon Number: C18:1 delta 9 cis.

Methyl stearate. Carbon Number: C18:0.

Methyl heptadecanoate. Carbon Number: C17:0.

Methyl palmitoleate. Carbon Number: C16:1 delta 9 cis.

Methyl palmitate. Carbon Number: C16:0.

Methyl pentadecanoate. Carbon Number: C15:0.

Methyl myristate. Carbon Number: C14:0.

Methyl tridecanoate. Carbon Number: C13:0.

Methyl laurate. Carbon Number: C12:0.

Methyl undecanoate. Carbon Number: C11:0.

Methyl caprate. Carbon Number: C10:0.

Methyl caprylate. Carbon Number: C8:0.

FAME#15. 16:0, methyl palmitate, 10.0. 18:0,methyl stearate,3.0. 18:1, methyl oleate, 50.0. 18:2, methyl linoleate, 30.0. 20:0, methyl arachidate, 1.5. 20:1, methyl eicosenoate, 1.5. 22:0, methyl behenate, 3.0. 24:0, methyl lignocerate, 1.0.

FAME#14. Composition of each compound listed as a weight/weight % basis. Packaged by volume to contain 50+ mg of mixture.

FAME#13. Composition of each compound listed as a weight/weight % basis. Packaged by volume to contain 50+ mg of mixture.

AOCS#6. 14:0, methyl myristate, 2.0. 16:0, methyl palmitate, 30.0. 16.1, methyl palmitoleate, 3.0. 18:0,methyl stearate, 14.0. 18:1, methyl oleate, 41.0. 18:2, methyl linoleate,7.0. 18:3, methyl linolenate, 3.0. Composition of each compound listed as a weight/weight % basis.

FAME #20 Mix (8 components), Restek - 35026, 50 mg/Ampule, Fatty acid methyl ester, FAME #20

FAME #19 Mix (4 components), Restek - 35025, 50 mg/Ampule, Fatty acid methyl ester, FAME #19

FAME #18 Mix (10 components), Restek - 35024, 50 mg/Ampule, Fatty acid methyl ester, FAME #18

FAME #17 Mix (5 components), Restek - 35023, 50 mg/Ampule, Fatty acid methyl ester, FAME #17

FAME #16 Mix (6 components), Restek - 35022, 50 mg, Fatty acid methyl ester, FAME #16

FAME#12. 13:0, methyl tridecanoate, 20. 15:0, methyl pentadecanoate, 20. 17:0, methyl heptadecanoate, 20. 19:0, methyl nonadecanoate, 20. Composition of each compound listed as a weight/weight % basis. Packaged by volume to contain 50+ mg of mixture.

FAME#9. 16:0, methyl palmitate, 20. 17:0, methyl heptadecanoate, 20. 18:0, methyl stearate, 20. 19:0, methyl nonadecanoate. 20:0, methyle arachidate, 20. Composition of each compound listed as a weight/weight % basis. Packaged by volume to contain 50+ mg of mixture.

FAME#8. 11:0, methyl undecanoate, 20. 12:0, methyl laurate, 20. 13:0. methyl tridecanoate, 20. 14:0, methyl myristate, 20. 15:0, methyl pentadecanoate, 20. Composition of each compound listed as a weight/weight % basis. Packaged by volume to contain 50+ mg of mixture.

FAME#7. 6:0, methyle caproate, 20. 7:0, Methyle heptanoate, 20. 8:0, methyl caprylate, 20. 9:0, methyl nonanoate, 20. 10:0, methyl caprate, 20. Composition of each compound listed as a weight/weight % basis. Packaged by volume to contain 50+ mg of mixture.

FAME #6. Fatty Acid Methyl Ester. 20:0 methyl arachidate 20, 20:1 methyl eicosenoate 20, 20:2 methyl eicosadienoate 20, 20:3 methyl homo gamma linolenate 20, 20:4 methyl arachidonate 20. Composition of each compound listed as a weight/weight % basis.

AOCS#5. 8:0, methyl caprylate, 7.0. 10:0, methyl caprate, 5.0. 12:0, methyl laurate, 48.0. 14:0, methyl myristate, 15.0. 16:0, methyl palmitate,7.0. 18:0,methyl stearate, 3.0. 18:1, methyl oleate, 12.0. 18:2, methyl linoleate, 3.0. Composition of each compound listed as a weight/weight % basis.

AOCS#4. 16:0, methyl palmitate,11.0. 18:0,methyl stearate, 3.0. 18:1, methyl oleate, 80.0. 18:2, methyl linoleate, 6.0. Composition of each compound listed as a weight/weight % basis. Packaged by volume to contain 50+ mg of mixture.

AOCS#3. 14:0, methyl myristate, 1.0. 16:0, methyl palmitate,4.0. 18:0,methyl stearate, 3.0. 18:1, methyl oleate, 45.0. 18:2, methyl linoleate,15.0. 18:3, methyl linolenate, 3.0. 20:0, methyl arachidate, 3.0. 22:0 methyl behenate, 3.0. 22:1, methyl erucate, 20.0. 24:0, methyl lignocerate, 3.0.

AOCS#2. 16:0, methyl palmitate,7.0. 18:0,methyl stearate, 5.0. 18:1, methyl oleate, 18.0. 18:2, methyl linoleate, 36.0. 18:3, methyl linolenate, 34.0. Composition of each compound listed as a weight/weight % basis. Packaged by volume to contain 50+ mg of mixture.

AOCS#1. 16:0, methyl palmitate,6.0. 18:0,methyl stearate, 3.0. 18:1, methyl oleate, 35.0. 18:2, methyl linoleate, 50.0. 18:3, methyl linolenate, 3.0. 20:0, methyl arachidate, 3.0. Composition of each compound listed as a weight/weight % basis. Packaged by volume to contain 50+ mg of mixture.

Grob Text Mix. nC10-FAME: 0.42mg/mL. nC11-FAME: 0.42. nC12-FAME: 0.41. 2,3-butanediol: 0.53. dicyclohexylamine: 0.31. 2,6-dimethylphenol. 2-ethylhexanoic acid: 0.38. nonanal: 0.40. 1-octanol: 0.36. undecane:0.29. decane: 0.28. In CH2CL2 1mL/ampule.

531.2 Carbamate Pesticide. Calibration mixture. Formulated in acetonitrile for stability and convenience for hplc analysis.

Organophosphorus Pesticide Mix, 8270/Appendix IX (9 components), Restek - 32419, 1 ml/Ampule, Organophosphorus Pesticide Mix, 8270/Appendix IX

Organochlorine Pesticide Mix AB # 3 (20 Components), Restek - 32415, 1 ml/Ampule, Organochlorine Pesticide Mix AB # 3

Aroclor Solutions, Restek - 32409, 1 ml/Ampule, Aroclor 1262

Organochlorine Pesticide Mix AB #2. In hexane/toluene (1:1), 1mL/ampule.

Organochlorine Pesticide Mix AB #1. 200ug/mL ea. in hexane/toluene (1:1), 1mL/ampule.

8140/8141 Internal Standards & Surrogates, triphenyl phosphate and tributylphosphate, Restek - 32281, 1 ml/Ampule, Triphenylphosphate

8140/8141 Internal Standards & Surrogates, triphenyl phosphate and tributylphosphate, Restek - 32280, Tributylphosphate

Pesticide Reference Standard, Method 8140/8141, Restek - 32278, Pesticide Calibration Mix, includes Dimethoate, Parathion, EPN, Sulfotepp, Malathion, TEPP, Monocrotophos, 200 µg/mL each in Hexane:Acetone (95/5), 1 mL/ampoule

Pesticide Reference Standard, Method 8140/8141, Restek - 32277, Pesticide Calibration Mix, includes 20 Components, 200 µg/mL each in Hexane:Acetone (95/5), 1 mL/ampoule

Dinoseb, Restek - 32251, 1 ml/Ampule, Dinoseb

Hexachlorobenzene, Restek - 32231, 1 ml/Ampule, Hexachlorobenzene

Dieldrin, Restek - 32218, 1 ml/Ampule, Dieldrin

4,4'-DDT, Restek - 32203, 1 ml/Ampule, 4,4'-DDT

2,4'-DDT, Restek - 32200, 1 ml/Ampule, 2,4'-DDT

2,4'-DDE, Restek - 32099, 1 ml/Ampule, 2,4'-DDE

2,4'-DDD, Restek - 32098, 1 ml/Ampule, 2,4'-DDD

PCB Kit #2. 200ug/mL in isooctane, 1mL/ampule. Includes 1 each of 32064, 32065, 32066, 32067, 32068, 32069, and 32070.

PCB Kit #1. 1,000ug/mL in hexane, 1mL/ampule. Includes 1 each of 32006, 32007, 32008, 32009, 32010, 32011, and 32012.

Aroclor 1260. 500mg/kg in transformer oil, 1ml/ampule.

Aroclor 1260. 50mg/kg in transformer oil, 1ml/ampule.

Aroclor 1254. 500mg/kg in transformer oil, 1ml/ampule.

Aroclor 1254. 50mg/kg in transformer oil, 1ml/ampule.

Aroclor 1248. 500mg/kg in transformer oil, 1ml/ampule.

Aroclor 1248. 50mg/kg in transformer oil, 1ml/ampule.

Aroclor 1242. 500mg/kg in transformer oil, 1ml/ampule.

Aroclor 1242. 50mg/kg in transformer oil, 1ml/ampule.

Aroclor 1232. 500mg/kg in transformer oil, 1ml/ampule.

Aroclor 1232. 50mg/kg in transformer oil, 1ml/ampule.

Aroclor 1221. 500mg/kg in transformer oil, 1ml/ampule.

Aroclor 1221. 50mg/kg in transformer oil, 1ml/ampule.

Aroclor 1016. 500mg/kg in transformer oil, 1ml/ampule.

Aroclor 1016. 50mg/kg in transformer oil, 1ml/ampule.

Pesticide Performance Evaluation Mix w/Surrogates. alpha-BHC: 1ug/mL. beta-BHC: 1. gamma-BHC(lindane): 1. 4,4'-DDT: 10. decachlorobiphenyl: 2ug/mL. endrin: 5. methoxychlor: 25. 2,4,5,6-tetrachloro-m-xylene: 2. In hexane, 1mL/ampule.

chlordane (technical). 5000ug/mL. Solvent: Isooctane. Packaged 1mL/ampule.

toxaphene. 5000ug/mL. Solvent: Isooctane. Packaged 1mL/ampule.

Aroclor 1260. 200ug/mL. Solvent: Isooctane. Packaged 1mL/ampule.

Aroclor 1254. 200ug/mL. Solvent: Isooctane. Packaged 1mL/ampule.

Aroclor 1248. 200ug/mL. Solvent: Isooctane. Packaged 1mL/ampule.

Aroclor 1242. 200ug/mL. Solvent: Isooctane. Packaged 1mL/ampule.

Aroclor 1232. 200ug/mL. Solvent: Isooctane. Packaged 1mL/ampule.

Aroclor 1221. 200ug/mL. Solvent: Isooctane. Packaged 1mL/ampule.

Aroclor 1016. 200ug/mL. Solvent: Isooctane. Packaged 1mL/ampule.

Herbicide Mix #4. Derivatized Form: acifluorfen methyl ester, bentazon methyl ester, chloramben methyl ester, DCPA dimethyl ester. 3,5-dichlorobenzoic acid methyl ester, 4-nitroanisole methyl ester, pentachloroanisole, picloram methyl ester. 2,00ug/mL each in hexane, 1mL/ampule.

Herbicide Mix #4. Free Acid Form: acifluorfen, bentazon, chloramben, DCPA diacid. 3,5-dichlorobenzoic acid, 4-nitrophenol,pentachlorophenol,picloram. 2,00ug/mL each in methanol, 1mL/ampule.

Method 608 Complete Kit. 32022: Method 608 Calibration Mix. 32006: Aroclor1016. 32007: Aroclor1221. 32008: Aroclor1232. 32009: Aroclor1242. 32010: Aroclor1248. 32011: Aroclor1254. 32012: Aroclor1260. 32005: Toxaphene. 32021: Chlordane(technical). Contains 1mL each of these mixtures.

Herbicide Mix #3. Derivatized Form: MCPA methyl ester, MCPP methyl ester. 20,000ug/mL ea. in hexane, 1mL/ampule.

Herbicide Mix #3. Free Acid Form: MCPA, MCPP. 20,000ug/mL ea. in methanol, 1mL/ampule.

Herbicide Mix #2. Derivatized Form: dalapon methyl ester. 2,000ug/mL each in hexane, 1mL/ampule.

Herbicide Mix #2. Free Acid Form: dalapon. 2,000ug/mL each in methanol, 1mL/ampule.

Herbicide Mix #1. Derivatized Form: 2,4-D methyl ester, 2,4-DB methyl ester, 2,4,5-T methyl ester, 2,4,5-TP methyl ester. dicamba methyl ester, dichlorprop methyl ester. dinoseb methyl ether,200ug/mL each in hexane, 1mL/ampule.

Herbicide Mix #1. Free Acid Form: 2,4-D, 2,4-DB, 2,4,5-T, 2,4,5-TP. dicamba, dichlorprop. dinoseb,200ug/mL each in methanol, 1mL/ampule.

Herbicide Internal Standard for EPA 515. 4,4' -dibromooctafluorobiphenyl. 250ug/mL in hexane, 1mL/ampule.

Herbicide Surrogate Mix for EPA 515. Derivatized Form: DCAA methyl ester (2,4-dichlorophenyl acetic acid methyl ester). 200ug/mL in hexane, 1mL/ampule.

Herbicide Surrogate Mix for EPA 515. Free Acid Form: DCAA (2,4-dichlorophenyl acetic acid). 200ug/mL in methanol, 1mL/ampule.

508 Performance Check Mix. delta-BHC: 0.4ug/mL. chlorothalonil: 0.5. chlorpyrifos: 0.02. DCPA (dacthal): 0.5At concentrations listed in methyl tert-butyl ether, 1mL/ampule.

Revised GPC Calibration Mix. bis(2-ethylhexyl)phthalate: 5mg/mL. corn oil: 250mg/mL. methoxychlor: 1.0mg/mL. perylene: 0.2mg/mL. sulfur: 0.8mg/mL. In methylene chloride, 5mL/ampule.

Revised GPC Calibration Mix. bis(2-ethylhexyl)phthalate: 5mg/mL. corn oil: 250mg/mL. methoxychlor: 1.0mg/mL. perylene: 0.2mg/mL. sulfur: 0.8mg/mL. In methylene chloride, 1mL/ampule.

CLP-Quick Turnaround Method PCB Standard, Aroclor 1016/1260. Packaged in hexane at a concentration of 1000ug/ml in a 1ml ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

CLP-Pesticides Matrix Spike Standard. Packaged in methanol. 1mL ampule. Each has an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis, and Material Safety Data Sheet. Aldrin; Gamma-BHC (Lindane); Heptachlor-200ug/mL. 4,4'-DDT; Dieldrin; Endrin-500ug/mL.

Decachlorobiphenyl Mix. 200ug/mL in acetone, 5 mL/ampule.

CLP-Pesticides TCMX Individual Surrogate Standard. Packaged in acetone. Concentration: 200ug/mL in a 1mL ampule. Each includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Compound is Decachlorobiphenyl.

CLP-Pesticides TCMX Individual Surrogate Standard. Packaged in acetone. Concentration: 200ug/mL. 5mL ampule. Each includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Compound: 2,4,5,6-Tetrachloro-m-Xylene.

CLP-Pesticides TCMX Individual Surrogate Standard. Packaged in acetone. Concentration: 200ug/mL. 1mL ampule. Each includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Compound: 2,4,5,6-Tetrachloro-m-Xylene.

CLP-Pesticides Dibutylchlorendate Standard. Packaged in acetone at a concentration of 200ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

EPA Method 505 Organohalide Pesticide Mixture. Packaged in methanol at a concentration of 200ug/mL in a 1mL ampule. Includes 16 compounds. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis, and Material Safety Data Sheet (MSDS).

CLP GPC Calibration Standards. Mixtures are packaged in methylene chloride at the stated concentrations in a 5mL ampule. Each standard includes an ampule breaker, deactivated amber screw top-vial, extra product label, Certificate of Analysis, and Material Safety Data Sheet (MSDS).

Method 608 Calibration Mix. aldrin, alpha-BHC, beta-BHC, delta-BHC. gamma-BHC (lindane), 4,4'-DDD, 4,4'-DDE, 4,4'-DDT. dieldrin, endosulfan I, endosulfan II, endosulfan sulfate. endrin, endrin aldehyde, heptachlor, heptachlor epoxide (B). 200ug/mL each in hexane:toluene(1:1), 1mL/ampule.

chlordane (technical). 1000ug/mL. Solvent: Hexane. Packaged 1mL/ampule.

CLP GPC Calibration Mix. bis(2-ethylhexyl)phthalate: 10mg/mL. corn oil: 250mg/mL. methoxychlor: 2.0mg/mL. perylene: 0.2mg/mL. sulfur: 0.8mg/mL. In methylene chloride, 1mL/ampule.

CLP-Pesticides Matrix Spike Mixture. Standards are packaged in acetone in 1mL ampules. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis, and Material Safety Data Sheet (MSDS). 6 compounds in concentrations from 25-50ug/mL.

CLP-Pesticides Florisil Cartridge Check. Packaged in acetone at a concentration of 1000ug/mL in 1mL ampules. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis, and Material Safety Data Sheet. Compound: 2,4,5-Trichlorophenol.

TCLP Chlordane Mix. chlordane (technical). 2,000ug/mL in methanol, 1mL/ampule.

TCLP Toxaphene Standard. Packaged in methanol at a concentration of 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis, and Material Safety Data Sheet.

TCLP Underivatized Herbicide Mixture. Packaged in methanol. Concentration of 2000ug/mL. 1mL ampule. Each standard has an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis, and Material Safety Data Sheet (MSDS). Compounds: 2,4-D and 2,4,5-TP (Silvex).

TCLP Pesticide Standard. Packaged in methanol. Concentration: 2000ug/mL. 1mL ampule. Each has ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Gamma-BHC (Lindane), Endrin, Heptachlor Epoxide(B), Heptachlor, Methoxychlor.

CLP-Quick Turnaround Method PCB Standard, Aroclor 1260. Packaged in hexane at a concentration of 1000ug/ml in a 1ml ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

CLP-Quick Turnaround Method PCB Standard, Aroclor 1254. Packaged in hexane at a concentration of 1000ug/ml in a 1ml ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

CLP-Quick Turnaround Method PCB Standard, Aroclor 1248. Packaged in hexane at a concentration of 1000ug/ml in a 1ml ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

CLP-Quick Turnaround Method PCB Standard, Aroclor 1242. Packaged in hexane at a concentration of 1000ug/ml in a 1ml ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

CLP-Quick Turnaround Method PCB Standard, Aroclor 1232. Packaged in hexane at a concentration of 1000ug/ml in a 1ml ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

CLP-Quick Turnaround Method PCB Standard, Aroclor 1221. Packaged in hexane at a concentration of 1000ug/ml in a 1ml ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

CLP-Quick Turnaround Method PCB Standard, Aroclor 1016. Packaged in hexane at a concentration of 1000ug/ml in a 1ml ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

CLP-Pesticides Toxaphene Standard. Standard is packaged in hexane at a concentration of 1000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

CLP-Pesticides Standard Mix B. Standards are packaged in hexane in a 1ml ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis, and Material Safety Data Sheet (MSDS). 13 compounds in concentrations from 8-16ug/mL.

CLP-Pesticides Standard Mix A. Standards are packaged in hexane in a 1ml ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis, and Material Safety Data Sheet. 11 compounds in concentrations from 8-80ug/mL.

CLP-Pesticides Performance Evaluation Mixture. Packaged in hexane in 1ml ampules. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis, and Material Safety Data Sheet (MSDS). 6 compounds in concentrations from 1-10ug/mL.

CLP-Pesticides DCB and TCMX Surrogate Mixture. Concentration: 200ug/mL in 1mL ampules. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Compounds: Decachlorobiphenyl (DCB) and 2,4,5,6-Tetrachloro-m-Xylene (TCMX).

Individual Semivolatile Surrogate and Internal Standards for EPA Methods, Restek - 31828, 1 ml/Ampule, p-Terphenyl-d14

Antifoam Agent for Purge-and-Trap Samples, Restek - 31822, 1 ml/Ampule, Antifoam agent for purge-and-trap

Hexachlorophene, Restek - 31811, 1 ml/Ampule, Hexachlorophene

Appendix IX Mix #2 (32 components), Restek - 31806, 1 ml/Ampule, Appendix IX Mix #2

Single-Component Explosives Solutions, Restek - 31669, 1 ml/Ampule, 2,4,6-Trinitrotoluene*

Single-Component Explosives Solutions, Restek - 31662, 1 ml/Ampule, 1,3-Dinitrobenzene

Single-Component Explosives Solutions, Restek - 31658, 1 ml/Ampule, 4-Nitrotoluene

Single-Component Explosives Solutions, Restek - 31657, 1 ml/Ampule, Nitrobenzene

8270 Calibration Kit, Restek - 31626, Kit, 8270 Calibration Kit

GC-MS Tuning Mixture (4 Components), Restek - 31615, 1 ml/Ampule, GC-MS Tuning Mixture

Connecticut ETPH Calibration Mixture (15 components), Restek - 31614, 1 ml/Ampule, Connecticut ETPH Calibration Mixture

Single-Component Explosives Solutions, Restek - 31600, 1 ml/Ampule, PETN (pentaerythritol tetranitrate)*

Single-Component Explosives Solutions, Restek - 31498, 1 ml/Ampule, Nitroglycerin*

aniline. 1000ug/mL. Solvent: Methanol. Packaged 1mL/ampule.

WA EPH Aromatic Hydrocarbon Standard. 1,000ug/mL ea. in methylene chloride, 1mL/ampule.

Used Motor Oil Composite Standard.

Motor Oil Composite Standard.

Semi-Volatile Calibration Kit # 3(with benzidine). Contains 1mL each of these mixtures.

MA EPH Aliphatic Hydrocarbon Standard (14 components), Restek - 31459, 1 ml/Ampule, MA EPH Aliphatic Hydrocarbon Standard

MA EPH Aromatic Hydrocarbon Standard (17 components), Restek - 31458, 1 ml/Ampule, MA EPH Aromatic Hydrocarbon Standard

Method 1664 Oil & Grease Mixture. hexadecane, stearic acid. 4,000ug/mL each in acetone, 5mL/ampule.

Florida TRPH Surrogate Mix. nonatriacontane (C39). 3,000ug/mL in carbon disulfide, 1mL/ampule. Ground transportation shipments only.

8330 Calibration Mix #2 (7 components), Restek - 31451, 1 ml/Ampule, 8330 Calibration Mix #2

8330 Calibration Mix #1 (7 components), Restek - 31450, 1 ml/Ampule, 8330 Calibration Mix #1

STANDARD HEXACHLOROETHANE 1ML.

STANDARD HEXACHLOROBUTADIENE.

ACID BENZOIC 1ML.

PENTACHLOROPHENOL 1ML.

Benzo(a)pyrene, Restek - 31271, 1 ml/Ampule, Benzo(a)pyrene

acenaphthylene. 1000ug/mL. Solvent: Methanol. Packaged 1mL/ampule.

Florida TRPH Standard (17 components), Restek - 31266, 1 ml/Ampule, Florida TRPH Standard

610 PAH Calibration Mix A. In CH2Cl2,1mL/ampule.

Mineral Spirits Standard. 50,000ug/mL ea. in CH2Cl2, 5mL/ampule. There are four general types of material classified as mineral spirits, dependent upon boiling point range (BPR): Type I (standard solvent), BPR of 149-182[degree]C. Type II (high flash point), BPR of 177-196[degree]C.

Mineral Spirits Standard. 50,000ug/mL ea. in CH2Cl2, 1mL/ampule. There are four general types of material classified as mineral spirits, dependent upon boiling point range (BPR): Type I (standard solvent), BPR of 149-182[degree]C. Type II (high flash point), BPR of 177-196[degree]C.

Diesel Fuel #2 Composite Standard. 50,000ug/mL ea. in CH2Cl2, 5mL/ampule.

Diesel Fuel #2 Composite Standard. 50,000ug/mL ea. in CH2Cl2, 1mL/ampule.

Kerosene Fuel Composite Standard. 50,000ug/mL ea. in CH2Cl2, 5mL/ampule.

Kerosene Fuel Composite Standard. 50,000ug/mL ea. in CH2Cl2, 1mL/ampule.

JP-8 Standard. 50,000ug/mL ea. in CH2Cl2, 1mL/ampule.

JP-5 Military Fuel Standard. 50,000ug/mL ea. in CH2Cl2, 1mL/ampule.

Fuel Oil #6 Standard. 50,000ug/mL ea. in CH2Cl2, 1mL/ampule. This oil, sometimes called Bunker C or residual, is a black viscous fuel. Applications where it may be used require the ability to preheat the fuel prior to pumping and burning.

Fuel Oil #4 Standard. 50,000ug/mL ea. in CH2Cl2, 1mL/ampule.

Jet Fuel A Standard. 50,000ug/mL in CH2Cl2, 5mL/ampule. Commercial Jet Fuel A.

Jet Fuel A Standard. 50,000ug/mL in CH2Cl2, 1mL/ampule. Commercial Jet Fuel A.

Fuel Oil Degradation Mix. heptadecane. octadecane. pristane (2,6,10,14-tetramethylpentadecane). phytane (2,6,10,14-tetramethylhexadecane). 2,000ug/mL ea. in CH2Cl2, 1mL/ampule. 1. Interpretation of Gas Chromatographic Data in Subsurface Hydrocarbon Investigations, R Senn and M Johnson.

D3710-95 Calibration Mix. 2-methylbutane:10. n-pentane :8. 2-methylpentane:6. n-hexane:6. 2,4-dimethylpentane:6. n-heptane:10. toluene:12. n-octane:5. p-xylene:14. n-propylbenzene:5. n-decane:4. n-butylbenzene:4. n-dodecane:4. n-tridecane:2. n-tetradecane:2. n-pentadecane:2. Packaged 1 mL/ampule.

D2887 Calibration Mix. packaged 1 mL/ampule.

JP-4 Military Fuel Standard. 5,000ug/mL ea. in CH2Cl2, 1mL/ampule.

Fuel Oil #6 Standard. 5,000ug/mL ea. in CH2Cl2, 1mL/ampule. This oil, sometimes called Bunker C or residual, is a black viscous fuel. Applications where it may be used require the ability to preheat the fuel prior to pumping and burning.

Fuel Oil #4 Standard. 5,000ug/mL ea. in CH2Cl2, 1mL/ampule.

Jet Fuel A Standard. 5,000ug/mL in CH2Cl2, 1mL/ampule. Commercial Jet Fuel A.

DRO Mix (Tennessee/Mississippi) (16 components), Restek - 31214, 1 ml/Ampule, DRO Mix (Tennessee/Mississippi)

L/C Aniline Mix B. 4-chloroaniline. 2,000ug/mL ea. in CH2Cl2, 1mL/ampule.

L/C Aniline Mix A. 2-nitroaniline, 3-nitroaniline, 4-nitroaniline. 2,000ug/mL ea. in CH2Cl2, 1mL/ampule.

SV Internal Standard Mix. acenaphtene-d10, chrysene-d12, 1,4-dichlorobenzene-d4, naphthalene-d8. perylene-d12, phenanthrene-d10. 2,000ug/ml ea. in CH2CL2, 1mL/ampule.

LUST Retention Time Standard. Packaged in methylene chloride at a concentration of 25ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains seven compounds.

1-chlorooctadecane. 10000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

UST Diesel Surrogate Standard, o-Terphenyl. Packaged in methylene chloride at 10,000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

UST Diesel Surrogate Standard, 2-Fluorobiphenyl. Packaged in methylene chloride at 10,000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

UST Diesel Surrogate Standard, p-Terphenyl. Packaged in methylene chloride at 10,000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

UST Kerosene Composite Standard. Packaged in methylene chloride at 5000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Composite sample formed from sample from 3 sources.

UST Diesel Fuel No. 2 Composite Standard. Packaged in methylene chloride. 5000ug/mL. 1mL ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Samples from 3 sources were blended to form a composite sample.

Semi-Volatile Surrogate Standards for EPA Methods, 2-Fluorobiphenyl Standard. Packaged in methylene chloride at 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

8040 Surrogate Mix. 2-fluorophenol, 2,4,6-tribromophenol. 2,000ug/mL ea. in isopropanol, 1mL/ampule.

EPA Method 8040 Phenol Standard No. 2. Packaged in isopropanol at a concentration of 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 9 compounds.

EPA Method 8040 Phenol Standard No. 1. Packaged in isopropanol at a concentration of 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 9 compounds.

EPA Method 3500 (SW-846) and CLP-Semi-Volatiles Acid Surrogate Standard. In methanol. 10,000ug/mL. 5mL ampule. Includes deactivated amber screw-top vial, Certificate of Analysis and Material Safety Data Sheet. Compounds: 2-Fluorophenol; Phneol-d6 and 2,4,6-Tribromophenol.

EPA Method 3500 (SW-846) and CLP-Semi-Volatiles Base/Neutrals Surrogate. In methylene chloride. 5000ug/mL. 5mL ampule. Includes deactivated amber screw-top vial, Certificate of Analysis and Material Safety Data Sheet. Compounds: 2-Fluorobiphenyl, Nitrobenzene-d5 and p-Terphenyl-d14.

CLP-Semi-Volatiles Acid Matrix Spike. Packaged in methanol at 7500ug/mL in a 5mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 5 compounds.

EPA Method 3500 (SW-846) and CLP-Semi-Volatiles Base/Neutrals Matrix Spike Standard. In methanol at 5000ug/mL. 5mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 6 compounds.

CLP-Semi-Volatiles Acid Surrogate Standard (3/90 SOW). Packaged in methanol at 7500ug/mL in a 5mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 4 compounds.

CLP-Semi-Volatiles Base/Neutrals Surrogate (3/90 SOW). Packaged in methylene chloride. 5000ug/mL in a 5mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 4 compounds.

EPA Method 3500 (SW-846) and CLP-Semi-Volatiles Base/Neutrals Matrix Spike Standard. In methanol at 5000ug/mL. 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 6 compounds.

CLP-Semi-Volatiles Acid Surrogate Standard (3/90 SOW). Packaged in methanol at 7500ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 4 compounds.

CLP-Semi-Volatiles Base/Neutrals Surrogate (3/90 SOW). Packaged in methylene chloride at 5000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 4 compounds.

EPA Method 3500 (SW-846) Acid Matrix Spike Standard. Packaged in methanol. Concentration: 10000ug/mL in a 5mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains five compounds.

UST o-Terphenyl Diesel Internal Standard. Packaged in acetone at a concentration of 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

UST 5-Alpha-Androstane Diesel Internal Standard. Packaged in methylene chloride at a concentration of 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet (MSDS).

UST Diesel Range Organics (DRO) Standard (EPA/WISC). Packaged in methylene chloride at 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 10 compounds.

EPA Method 3500 (SW-846) and CLP-Semi-Volatiles Acid Surrogate Standard. In methanol. 10000ug/mL. 1mL ampule. Includes deactivated amber screw-top vial, Certificate of Analysis and Material Safety Data Sheet. Compounds: 2-Fluorophenol; Phneol-d6 and 2,4,6-Tribromophenol.

EPA Method 3500 (SW-846) and CLP-Semi-Volatiles Base/Neutrals Surrogate. In methylene chloride. 5000ug/mL. 1mL ampule. Includes deactivated amber screw-top vial, Certificate of Analysis and Material Safety Data Sheet. Compounds: 2-Fluorobiphenyl, Nitrobenzene-d5 and p-Terphenyl-d14.

EPA Method 3500 (SW-846) Acid Matrix Spike Standard. Packaged in methanol. Concentration: 10000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains five compounds.

phenol-d6. 2000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

pentafluorophenol. 2000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

2-fluorophenol. 2000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

pyridine-d5. 2000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

phenanthrene-d10. 2000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

nitrobenzene-d5. 2000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

naphthalene-d8. 2000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

decafluorobiphenyl. 2000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

4, 4'-dibromooctafluorobiphenyl. 2000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

anthracene-d10. 2000ug/mL. Solvent: Methylene Chloride. Packaged 1mL/ampule.

Method 612 - Chlorinated Hydrocarbons Calibration Mix. 2-chloronaphthalene, 1,2-dischlorobenzene, 1,3-dichlorobenzene, 1,4-dichlorobenzene. hexachlorobenzene, hexachlorobutadiene, hexachlorocyclopentadiene, hexachloroethane, 1,2,4-trichlorobenzene. 2,000ug/mL ea. in isooctane, 1mL/ampule.

Method 611 - Haloethers Calibration Mix. bis(2-chloroethoxy)methane, bis(2-chloroethyl)ether, bis(2-chloroisopropyl)ether, 4-bromophenyl phenyl ether. 4-chlorophenyl phenyl ether. 2,000ug/mL ea. in acetone, 1mL/ampule.

Method 607-Nitrosamines Calibration Mix. N-nitrosodimethylamine, N-nitroso-di-npropylamine, N-nitrosodiphenylamine. 2,000ug/mL ea. in methanol, 1mL/ampule.

Method 606-Phthalate Esters Calibration Mix. bis(2-ethylhexyl)phthalate, butyl benzyl phthalate, diethyl phthalate, dimethyl phthalate. di-n-butyl phthalate, di-n-octyl phthalate. 2,000ug/mL ea. in methanol 1mL/ampule.

Method 605-Benzidines Calibration Mix. benzidine, 3,3'-dichlorobenzidine. 2,000ug/mL each in methanol 1mL/ampule.

EPA Method 604 Phenols Calibration Mix. Packaged in methanol at a concentration of 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 11 compounds.

TCLP Base/Neutrals Standard. Packaged in acetone at a concentration of 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 7 compounds.

TCLP Acid Mixes. 2-methylphenol, 3-methylphenol, 4-methylphenol, pentachlorophenol. 2,4,5-trichlorophenol, 2,4,6-trichlorophenol. 2,000ug/mL ea. in methanol, 1mL/ampule.

CLP-Semi-Volatiles 3,3'-Dichlorobenzidine. Packaged in methanol at a concentration of 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

EPA Method 3500 (SW-846) and CLP-Semi-Volatiles Acid Surrogate Standard. In methanol. 2000ug/mL. 1mL ampule. Includes deactivated amber screw-top vial, Certificate of Analysis and Material Safety Data Sheet. Compounds: 2-Fluorophenol; Phneol-d6 and 2,4,6-Tribromophenol.

EPA Method 3500 (SW-846) and CLP-Semi-Volatiles Base/Neutrals Surrogate. In methylene chloride. 1000ug/mL. 1mL ampule. Includes deactivated amber screw-top vial, Certificate of Analysis and Material Safety Data Sheet. Compounds: 2-Fluorobiphenyl, Nitrobenzene-d5 and p-Terphenyl-d14.

Acid Matrix Spike Mix. 4-chloro-3-methylphenol, 2-chlorophenol, 4-nitrophenol, pentachlorophenol, phenol. 2,000ug/mLm ea. in methanol, 1mL/ampule. Highest concentrations commercially available. Convenient 1mL and 5mL package sizes. Significantly reduces laboratory cost per sample.

CLP-Semi-Volatile Organics Standards (3/90 SOW), Calibration Mixture #7. Packaged in methylene chloride. 2000ug/mL. 1mL ampule. Each includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 3 compounds.

CLP-Semi-Volatile Organics Standards (3/90 SOW), Calibration Mixture #6. Packaged in 1:1 toluene/hexane. 2000ug/mL. 1mL ampule. Each includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 18 compounds.

CLP-Semi-Volatile Organics Standards (3/90 SOW), Calibration Mixture #5. Packaged in methylene chloride. 2000ug/mL. 1mL ampule. Each includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 16 compounds.

CLP-Semi-Volatile Organics Standards (3/90 SOW), Calibration Mixture #4. Packaged in methylene chloride. 2000ug/mL. 1mL ampule. Each includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 13 compounds.

CLP-Semi-Volatile Organics Standards (3/90 SOW), Calibration Mixture #3. Packaged in methylene chloride. 2000ug/mL. 1mL ampule. Each includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 14 compounds.

CLP-Semi-Volatile Organics Standards (3/90 SOW), Calibration Mixture #2. Packaged in methylene chloride. 2000ug/mL. 1mL ampule. Each includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 15 compounds.

CLP-Semi-Volatile Organics Standards (3/90 SOW), Calibration Mixture #1. Packaged in methylene chloride. 2000ug/mL. 1mL ampule. Each includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 5 compounds.

CLP-Semi-Volatiles Internal Standard. Packaged in methylene chloride at 4000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 6 compounds.

EPA Method 3500 (SW-846) and CLP-Semi-Volatiles Base/Neutrals Matrix Spike Standard. In methanol at 1000ug/mL. 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 6 compounds.

CLP-Semi-Volatiles Acid Surrogate Standard (3/90 SOW). Packaged in methanol at 1500ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 4 compounds.

CLP-Semi-Volatiles Base/Neutrals Surrogate (3/90 SOW). Packaged in methylene chloride at 1000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 4 compounds.

CLP-Semi-Volatiles DFTPP Tuning Compound. Packaged in methylene chloride at 2500ug/mL in a 1mL ampule. Each includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Compound is Decafluorotriphenylphosphine.

Stoddard Solvent Standard, Restek - 30487, 1 ml/Ampule, Stoddard solvent

1,2-Dichlorotetrafluoroethane (CFC-114), Restek - 30476, 1 ml/Ampule, 1,2-Dichlorotetrafluoroethane (CFC-114)

1-Butanol, Restek - 30474, 1 ml/Ampule, 1-Butanol

Single-Component Oxygenates, Restek - 30470, 1 ml/Ampule, tert-Butanol (TBA)

1,1,2-Trichlorotrifluoroethane (CFC-113), Restek - 30462, 1 ml/Ampule, 1,1,2-Trichlorotrifluoroethane (CFC-113)

CLP 04.1 VOA CAL2000 MegaMix Standard (40 components), Restek - 30456, 1 ml/Ampule, CLP 04.1 VOA CAL2000 MegaMix

WA VPH Standard (15 Components), Restek - 30451, 1 ml/Ampule, WA VPH Standard

WA VPH Marker Standard (9 Components), Restek - 30450, 1 ml/Ampule, WA VPH Marker Standard

524 Rev.4.0 VOA Kit #2. 30042: 502.2 Calibration Mix #1. 30431: 502.2 CAL2000 MegaMix. 30202: 524 Calibration Mix #7. 30203: 524 Calibration Mix #8. 30204: 524 Surrogate/Internal Standard Mix. Contains 1 mL each of these mixtures.

502.2 VOA Calibration Kit #3 (2000ppm). 30439: 502.2 Calibration Mix #1A. 30432: 502.2 CAL2000 MegaMix. Contains 1mL each of these mixtures.

502.2 VOA Calibration Kit #2 (2000ppm). 30042: 502.2 Calibration Mix #1. 30431: 502.2 CAL2000 MegaMix. Contains 1mL each of these mixtures.

502.2 Calibration Mix #1A. bromomethane, chloroethane, chloromethane, dichlorofluoromethane. trichlorofluoromethane, vinyl chloride. 200ug/mL ea. in P&T methanol, 1mL/ampule.

MA VPH Surrogate Standard. 1,000ug/mL in P&T methanol, 1mL/ampule. 2,5 - dibromotoluene. Specific to Massachusetts method requirements. High concentration for maximum value. Data pack available for audit compliance.

MA Volatile Petroleum Hydrocarbon (VPH) Standard. In P&T methanol, 1mL/ampule. Specific to Massachusetts method requirements. High concentration for maximum value. Data pack available for audit compliance.

PA DEP UST Standard. benzene, 1,2-dibromoethane, 1,2-dichloroethane, ethylbenzene. isopropyl benzene, methyl-tert-butyl ether, naphthalene, toluene, m-xylene. o-xylene, p-xylene. 2,000ug/mL ea. in P&T methanol, 1mL/ampule. Pennsylvania Department of Environmental Protection Underground Storage Tank.

502.2 CAL2000 MegaMix Mixture. 200ug/mL ea. in P&T methanol, 1mL/ampule. Convenient 54-component mixtures. Two concentrations-2000ug/mL and 200ug/mL. Verified quality-complete data pack available. Produced gravimetrically (NO stock solutions used in preparation).

502.2 CAL2000 MegaMix Mixture. 2,000ug/mL ea. in P&T methanol, 1mL/ampule. Convenient 54-component mixtures. Two concentrations-2000ug/mL and 200ug/mL. Verified quality-complete data pack available. Produced gravimetrically (NO stock solutions used in preparation).

1, 2, 3-trichloropropane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

8240/8260 Calibration Check Mix. chloroform, 1,1-dichloroethene, 1,2-dichloropropane, ethylbenzene. toluene, vinyl chloride. 2,000ug/mL ea. in P&T methanol, 1mL/ampule.

p-xylene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

o-xylene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

m-xylene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 3, 5-trimethylbenzene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 2, 4-trimethylbenzene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

trichlorofluoromethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

trichloroethene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 1, 1-trichloroethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 2, 3-trichlorobenzene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

toluene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

tetrahydrofuran (THF). 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

tetrachloroethene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 1, 2, 2-tetrachloroethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 1, 1, 2-tetrachloroethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

styrene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

pyridine. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

propionitrile. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

pentachloroethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

2-nitropropane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

methyl-tert-butyl ether (MtBE). 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

methylene chloride. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

4-methyl-2-pentanone (MIBK). 5000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

methyl methacrylate. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

methacrylonitrile. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

isopropylbenzene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

isobutyl alcohol. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

iodomethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

ethylbenzene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

ethanol. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 4-dioxane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

diethyl ether (ethyl ether). 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

2, 2-dichloropropane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 2-dichloropropane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

trans-1, 2-dichloroethene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

cis-1, 2-dichloroethene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 1-dichloroethene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 2-dichloroethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 1-dichloroethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

dichlorodifluoromethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

trans-1, 4-dichloro-2-butene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 2-dibromomethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

dibromochloromethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1, 2-dibromo-3-chloropropane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

chloromethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

chloroform. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

2-chloroethyl vinyl ether. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

2-chloroethanol. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

chloroethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

chlorobenzene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

carbon tetrachloride. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

carbon disulfide. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

2-butanone(MEK). 5000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

bromomethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

bromoform. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

bromodichloromethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

bromobenzene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

benzene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

acrylonitrile. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

acetone. 5000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

624 Surrogate Standard Mix. 4-bromofluorobenzene, fluorobenzene, pentafluorobenzene. 2,000ug/mL ea. in P & T methanol, 1mL/ampule.

8260A Internal Standard Mix (3 components), Restek - 30241, 1 ml/Ampule, 8260A Internal Standard Mix

504.1 Calibration Mix (3 components), Restek - 30239, 1 ml/Ampule, 504.1 Calibration Mix

Regulated VOA Drinking Water Standards, DW-VOC Mix #3A. 2000ug/mL. methylene chloride, 1,2,4-trichlorobenzene, 1,1,2-trichloroethane. 2000ug/mL ea. in P&T methanol, 1mL/ampule.

PVOC Mix (California). benzene, ethylbenzene, methyl-tert-butyl ether, toluene. m-xylene, o-xylene, p-xylene. 1,000ug/mL ea. in P & T methanol, 1mL/ampule.

1, 4-dichlorobutane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

2-bromo-1-chloropropane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

bromochloromethane. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

toluene-d8. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

chlorobenzene-d5. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

8020A Calibration Mix. benzene, chlorobenzene, 1,2-dichlorobenzene, 1,3-dichlorobenzene. 1,4-dichlorobenzene, ethylbenzene, toluene, m-xylene. o-xylene, p-xylene. 2,000ug/mL ea. in P&T methanol, 1mL/ampule.

Regulated VOA Drinking Water Standards, DW-VOC Kit#2. 2000ug/mL. 30211: Trihalomethane Mix. 30219: DW-VOC Mix #1A. 30220: DW-VOC Mix #2A. 30235: DW-VOC Mix #3A. Contains ampule each of these mixtures.

Regulated VOA Drinking Water Standards, DW-VOC Mix #2A. 2000ug/mL. chlorobenzene, styrene, 1,2-dichlorobenzene, tetrachloroethene. cis-1,2-dichloroethene, toluene, trans-1,2-dichloroethene, m-xylene. 1,2-dichloropropane, o-xylene, ethylbenzene, p-xylene. 2000ug/mL ea. in P&T methanol, 1mL/ampule.

Regulated VOA Drinking Water Standards, DW-VOC Mix #1A. 2000ug/mL. benzene, 1,1-dichloroethene, carbon tetrachloride, 1,1,1-trichloroethane. 1,4-dichlorobenzene, trichloroethene, 1,2-dichloroethane vinyl chloride. 2000ug/mL ea. in P&T methanol, 1mL/ampule.

vinyl acetate. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

8240 Nitriles Mix. acrylonitrile, ethyl methacrylate, malononitrile, methacrylonitrile. methyl methacrylate, propionitrile, styrene. 2,000ug/mL ea. in P&T methanol, 1mL/ampule.

8240 Alcohols Mix. ally alcohol, 2-chloroethanol, ethanol, isobutyl alcohol. propagyl alcohol. 2,000ug/mL ea. in P&T methanol, 1mL/ampule.

BTEX Standard. benzene, ethylbenzene, toluene, m-xylene. o-xylene, p-xylene. 2,000ug/mL ea. in P&T methanol, 1mL/ampule.

VOA Purgeable Halocarbon Mix #1. 2,000ug/mL ea. in P&T methanol, 1mL/ampule.

Regulated VOA Drinking Water Standards, Trihalomethane Mix. 2000ug/mL. bromodichloromethane, chloroform, bromofrom, dibromochloromethane. 2000ug/mL ea. in P&T methanol, 1mL/ampule.

Unleaded Gasoline Composite Standard. 50,000ug/mL ea. in P&T methanol, 5mL/ampule.

Unleaded Gasoline Composite Standard. 50,000ug/mL ea. in P&T methanol, 1mL/ampule.

524 Rev. 4.0 Volatile Organics. Contains 1 mL each of these mixtures.

524 Calibration Mix #8. carbon disulfide, chloroacetonitrile, 1-chlorobutane, trans-1,4-dichloro-2-butene. 1,1-dichloropropanone, diethyl ether, hexachloroethane, iodomethane. methacrylonitrile, methyl tert-butyl ether,2-nitropropane, propionitrile. 2,000ug/mL ea. in P&T methanol,1mL/ampule.

524 calibration Mix #7. Note: Due to compound interactions, this mixture is a two ampule set. 2,000ug/mL ea. in P&T methanol, 1mL/ampule. Requires the use of 502.2 calibration Mixes in addition to these products.

524 Internal Standard/Surrogate Mix. 4-bromofluorobenzene, 1,2-dichlorobenzene-d4, fluorobenzene. 2,000ug/mL ea. in P&T methanol,1mL/ampule.

PVOC/GRO Mix (Wisconsin). benzene, ethylbenzene, methyl-tert-butyl ether, naphthalene. toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene,m-xylene. o-xylene, p-xylene. 1,000ug/mL ea. in P & T methanol, 1mL/ampule.

L/C VOA Lab Control Sample #2. Vinyl chloride. 2,500ug/ml in P&T methanol, 1mL/ampule.

L/C VOA Internal Standard Mix. chlorobenzene-d5, 1,4-dichlorobenzene-d4, 1,4-difluorobenzene. 2,500ug/ml ea. in P&T methanol, 1mL/ampule. w/data pack.

vinyl chloride. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

1-chlorooctane. 10000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

alpha, alpha, alpha-trifluorotoluene. 10000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

UST Gasoline Surrogate Standard, 4-Bromofluorobenzene. Packaged in purge and trap grade methanol at 10,000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

UST Unleaded Gasoline Composite Standard. Packaged in purge and trap grade methanol. 2500ug/mL. 1mL ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Composite blend, regular and premium grade unleaded gas.

EPA Method 418.1 TPH Calibration Mixture. In a 1mL ampule. Each has ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Compounds: Chlorobenzene, 25% (v/v); n-Hexadecane, 37.5% (v/v) and 2,2,4-Trimethylpentane, 37.5% (v/v).

EPA Method 8260 Volatile Organics Standards Kit. Contains VOA Matrix Spike Mixture, 502.2 Calibration Mixtures 1-6, 4-Bromofluorobenzene Standard, 8260 Surrogate Mixture, 8260 Internal Standard and System Performance Check Mixture. Includes Restek's Data Pack.

EPA Method 8260 Volatile Organics Standards, System Performance Check Mixture. Packaged in purge and trap grade methanol. 200ug/mL. 1mL ampules. Each has an ampule breaker, deactivated screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 5 compounds.

EPA Method 8260 Volatile Organics Standards, Internal Standard Mixture. Packaged in purge and trap grade methanol. 2500ug/mL. 1mL ampules. Each has an ampule breaker, deactivated screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 4 compounds.

EPA Method 8260 Volatile Organics Standards, 8260 Surrogate Mixture. Packaged in purge and trap grade methanol. 2500ug/mL. 1mL ampules. Each standard has an ampule breaker, deactivated screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 3 compounds.

UST Gasoline Range Organics (GRO) Standard. Packaged in purge and trap grade methanol at 1000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 9 compounds.

UST Gasoline Surrogate Standard, Alpha, Alpha, Alpha-Trifluorotoluene. Packaged in purge and trap grade methanol at 2500ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

UST Gasoline Surrogate Standard, 4-Bromofluorobenzene. Packaged in purge and trap grade methanol at 2500ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

UST Gasoline Surrogate Standard, 1-Chloro-4-fluorobenzene. Packaged in purge and trap grade methanol at 2500ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

UST Gasoline Range Organics (GRO) Standard. Packaged in purge and trap grade methanol in a 1mL ampule. Each has ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 9 compounds at concentrations from 500-1500ug/mL.

Method 8011 Calibration Mix. 1,2-dibromo-3-chloropropane (DBCP), 1,2-dibromoethane (EDB). 2,000 ug/mL ea. in P&T methanol, 1mL/ampule.

EPA Method 8010A Calibration Mixture No. 2. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 14 compounds.

EPA Method 624 Standards Kit. Contains 624 Calibration Mixture numbers 1-3 (packaged in purge and trap methanol at 2000ug/mL in a 1mL ampule for each standard) and 624 Internal Standard Mix (packaged in purge and trap methanol at 1500ug/mL in a 1mL ampule).

UST BTEX Standard. Packaged in purge and trap grade methanol at a concentration of 200ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains six compounds.

1, 2-dichlorobenzene-d4. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

alpha, alpha, alpha-Trifluorotoluene Standard(IS). 2000. PTM. Packaged 1mL/ampule.

502.2 Calibration Mixture #6. Used in EPA Method 502.2 Standards Kit and EPA Method 860 Volatile Organics Standards Kit. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Includes Certificate of Analysis and Material Safety Data Sheet.

502.2 Calibration Mixture #5. Used in EPA Method 502.2 Standards Kit and EPA Method 860 Volatile Organics Standards Kit. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Includes Certificate of Analysis and Material Safety Data Sheet.

502.2 Calibration Mixture #4. Used in EPA Method 502.2 Standards Kit and EPA Method 860 Volatile Organics Standards Kit. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Includes Certificate of Analysis and Material Safety Data Sheet.

502.2 Calibration Mixture #3. Used in EPA Method 502.2 Standards Kit and EPA Method 860 Volatile Organics Standards Kit. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Includes Certificate of Analysis and Material Safety Data Sheet.

502.2 Calibration Mixture #2. Used in EPA Method 502.2 Standards Kit and EPA Method 860 Volatile Organics Standards Kit. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Includes Certificate of Analysis and Material Safety Data Sheet.

502.2 Calibration Mixture #1. Used in EPA Method 502.2 Standards Kit, EPA Method 601 Purgable Halocarbon Kit, and EPA Method 860 Volatile Organics Standards Kit. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Includes Certificate of Analysis and Material Safety Data Sheet.

EPA Method 502.2 Internal Standard Mixture #2. Packaged in purge and trap grade methanol. 2000ug/mL. 1mL ampule. Has ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Compounds are 2-Bromo-1-Chloropropane and Fluorobenzene.

EPA Method 502.2 Internal Standard Mixture #1. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Includes ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Compound is 1-Chloro-2-Fluorobenzene.

Regulated VOA Drinking Water Standards, DW-VOC Mix #2. 200ug/mL. chlorobenzene, styrene, 1,2-dichlorobenzene, tetrachloroethene. cis-1,2-dichloroethene, toluene, trans-1,2-dichloroethene, m-xylene. 1,2-dichloropropane, o-xylene, ethylbenzene, p-xylene. 200ug/mL ea. in P&T methanol, 1mL/ampule.

EPA Method 501 Trihalomethane Mixture. In purge and trap methanol. 200ug/mL. 1mL ampule. Each has ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis, Material Safety Data Sheet. Compounds: Bromodichloromethane, Bromoform, Chloroform, Dibromochloromethane.

Method 602-Purgeable Aromatics Calibration Mix. benzene, chlorobenzene, 1,2-dichlorobenzene, 1,3-dichlorobenzene. 1,4-dichlorobenzene, ethylbenzene, toluene. 2,000ug/mL ea. in P&T methanol, 1mL/ampule.

1, 4-Difluorobenzene Standard (SUR). 2000. PTM. Packaged 1mL/ampule.

pentafluorobenzene. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

ethylbenzene-d10. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

EPA Method 624 Surrogate Standard- 1,2-Dichloroethene-d4. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

EPA Method 624 Surrogate Standard, 4-Bromofluorobenzene. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet.

benzene-d6. 2000ug/mL. Solvent: Purge and Trap Grade Methanol. Packaged 1mL/ampule.

TCLP VOA Mixture. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains eleven compounds.

EPA Method 624 Internal Standard Mixture. Packaged in purge and trap methanol at 1500ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains three compounds.

624 Calibration Mixture #3. For EPA Methods 624 Standards Kit and EPA Method 601 Purgeable Halocarbon Kit. Packaged in methanol at 2000ug/mL in a 1mL ampule. Includes Certificate of Analysis and Material Safety Data Sheet. Contains 12 compounds.

624 Calibration Mixture #2. For EPA Methods 624 Standards Kit and EPA Method 601 Purgeable Halocarbon Kit. Packaged in methanol at 2000ug/mL in a 1mL ampule. Includes Certificate of Analysis and Material Safety Data Sheet. Contains 12 compounds.

EPA Method 624 Calibration Mixture #1. Packaged in purge and trap methanol at 2000ug/mL in a 1mL ampule. Each standard includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains five compounds.

CLP-Volatiles Organics Standards, VOA Internal Standard Mixture. Packaged in purge and trap grade methanol at 2500ug/mL in a 1mL ampule. Each has an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 3 compounds.

CLP-Volatiles Organics Standards, VOA Calibration Mixture 5. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Each includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 4 compounds.

CLP-Volatiles Organics Standards, VOA Calibration Mixture 3. Packaged in purge and trap grade methanol at 2000ug/mL in a 1mL ampule. Each includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 10 compounds.

CLP-Volatiles Organics Standards, VOA Calibration Mixture 2. Packaged in purge and trap grade methanol at 2500ug/mL in a 1mL ampule. Each includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 7 compounds.

CLP-Volatiles Organics Standards, VOA Calibration Mixture 1. Packaged in purge and trap grade methanol at 5000ug/mL in a 1mL ampule. Each includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 4 compounds.

VOA Matrix Spike Mixture. For use with EPA Method 8260 and CLP-Volatiles Organic Standards Kits. Packed in purge and trap grade methanol. 2500ug/mL. 1mL ampules. With ampule breaker, deactivated screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. 5 compounds.

CLP-Volatiles Organics Standards, VOA Surrogate Spike Mixture. Packaged in purge and trap grade methanol at 2500ug/mL in a 1mL ampule. Each includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 3 compounds.

CLP-Volatiles Organics Standards, VOA Tuning Compound. Packaged in purge and trap grade methanol at 5000ug/mL in a 1mL ampule. Each includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. 4-Bromofluorobenzene.

CLP-Volatiles Organics Standards, VOA Screening Mixture 2. Packaged in purge and trap grade methanol at 1000ug/mL in a 1mL ampule. Each includes an ampule breaker, deactivated amber screw-top vial, extra product label, Certificate of Analysis and Material Safety Data Sheet. Contains 2 compounds.

Micro-Centrifuge Tube. 2ml Micro-centrifuge Tube Packed w/150mg Magnesium Sulfate 50mg PSA, and 50mg C18, 100pk

Micro-Centrifuge Tube. 2ml Micro-centrifuge Tube Packed w/150mg Magnesium Sulfate and 50mg PSA 100pk

Micro-Centrifuge Tube. 2ml Micro-centrifuge Tube packed w/150mg Magnesium Sulfate 50mg PSA, and 50mg Graphize Carbon, 100pk

Resprep® SPE Cartridges, Restek - 26063, 6 ml

PEEK Fitting Extractor, Restek - 25325, Tool, PEEK Fitting Extractor HPLC

XG-XF FITTING 1CM - 25026

Replacement Cap Frit Filters for Trident Guard Cartridges, Restek - 25023

Backpressure Regulators. Flow-through design, 5uL internal volume.

Backpressure Regulators. Same as above, but with high-pressure seat.

Backpressure Regulators. Standard design, 1/16 OD tubing, flanged.

Universal 10-32 PEEK Column Connector. Universal PEEK Connector allow for easy installation with all 1/16-inch tubing including stainless steel.

Universal 10-32 PEEK Column Connector. Universal PEEK Connector allow for easy installation with all 1/16-inch tubing including stainless steel.

Solvent Debubbler. With bracket, universal tip.

LO-Pulse Pulse Damper. Type 316 SS.

Low-Pressure, CPI Inlet Filters. Replacement Elements. 10um filter (2-pack).

Low-Pressure, CPI Inlet Filters. 1/8 OD, 10um, SS. may be used as a helium sparging diffuser.

Low-Pressure, Slip-on Inlet Filters. Universal tip. (fits Altex, ISCO, LDC, Varian, Waters, Perkin-Elmer, and other pumps).

High-Pressure, Cup-Type In-Line Filters. Replacement filter elements & seals (2-pack). For 0.5um filter.

High-Pressure, Cup-Type In-Line Filters. 1/6 OD. CPI. 0.5um.

Septa for Mininert® Precision Sampling Valves for Vials, Restek - 24906, Replacement Septa. Replacement septa

Caps and Septa for 2.0 ml Big Mouth Step Vials, Preassembled, Restek - 24677, Caps and Septa, Preassembled

WISP 48 Screw-Thread Step Vials, Restek - 24654, 4 ml, WISP 48 Step Vial with White Graduated Marking Spot

11 mm Crimp-Top Vial With 100 µl Insert, Restek - 24652, 2 ml, Vial with Insert w/100 µL Polypropylene Insert

Big Mouth Step Screw-Thread Vials, Restek - 24629, 2 ml, Big Mouth Step Vial with White Graduated Marking Spot

9 mm Short-Cap, Screw-Vial Closures, Polypropylene, Preassembled, Restek - 24498, Short Screw Caps

9 mm Short-Cap, Screw-Vial Closures, Polypropylene, Preassembled, Restek - 24486, Short Screw Caps

9 mm Short-Cap, Screw-Vial Closures, Polypropylene, Preassembled, Restek - 24485, Short Screw Caps

9 mm Short-Cap, Screw-Vial Closures, Polypropylene, Preassembled, Restek - 24474, Short Screw Caps

11 mm Crimp-Top Vials, Restek - 24386, 2 ml, Vial with white graduated marking spot

11 mm Crimp-Top Vials, Restek - 24385, 2 ml, Vial with white graduated marking spot

11 mm Crimp-Top Vials, Restek - 24384, 2 ml, Vial with white graduated marking spot

Aluminum Crimp Seals with Septa, 11 mm, Restek - 24360, Seals w/Septa

Deactivated Glass Wool, Restek - 24324, 10 g, Deactivated Glass Wool

Resprep® SPE Cartridges (Bonded Reversed Phases), Restek - 24051, 6 ml, Resprep Bonded Reversed Phase SPE Cartridge

Resprep -C8-47. Extraction of semi-volatile organic compounds. 47mm glass fiber, embedded with C18 or C8 bonded silica. Deep-pore design results in less clogging and faster flow rates. Meet requirements for EPA Methods 525.1,506, 550.1 and 549.1. Less expensive than fluoropolymer resin disks.

Diskcover -47 Reservoir. Must be used with the Diskcover -47 extraction disk holder. Order when using PTFE extraction filters.

Diskcover -47 Reservoir. Must be used with the Diskcover -47 extraction disk holder. Order when using PTFE extraction filters.

Fluoropolymer resin Sample Tubing (2' length, 1/8 OD), Resprep -6D Extraction System. Works with 47mm glass fiber or PTFE extraction filters. Compact, unbreakable, and less expensive than other SPE disk systems. Concave base grid completely removes water from filter holder.

Diskcover -47 Extraction Disk Holder.

Diskcover -47 Extraction Disk Holder.

Fluoropolymer resin Tube Luer adapters (1/8 OD). Works with 47mm glass fiber or PTFE extraction filters. Compact, unbreakable, and less expensive than other SPE disk systems. Concave base grid completely removes water from filter holder. Easy to disassemble and clean.

Vacuum Tubing (10ft., 1/4 ID). This unit allows switching from pressure to vacuum in a matter of seconds. Quiet, oil-free unit won't contaminate the extraction system or your samples. Provides 20 of Hg vacuum and 18psi pressure.

Accessories. Accessories for Resprep® SPE Manifolds, Restek - 24008, Replacement Vacuum Valve and Gauge Assembly

Resprep -C18-47. Extraction of semi-volatile organic compounds. 47mm glass fiber, embedded with C18 or C8 bonded silica. Deep-pore design results in less clogging and faster flow rates. Meet requirements for EPA Methods 525.1,506, 550.1 and 549.1. Less expensive than fluoropolymer resin disks.

Photoionization, PID Lamps, Restek - 23020, PID Lamp

FID Collector Assembly Kit for Agilent 5890 GCs, Restek - 23010, FID Collector Assembly Kit (includes insulators)

Sulfinert® Sample Loop, 5 µL, Restek. Sulfinert® Sample Loop, 5 µl, Restek - 22840, 5 µL. 5 µl

Replacement Microseals for Merlin Microseal Septa, Restek - 22815, Low-Pressure Microseal (1 to 45 psi)

Merlin Microseal Septa for Agilent GCs, Restek - 22814, Low Pressure Kit for Agilent GCs (1 to 45 psi). Low pressure kit for Agilent GCs (1 to 45 psi)

Merlin Microseal Septa for Agilent GCs, Restek - 22813, Low Pressure Kit for Agilent GCs (1 to 45 psi). Low pressure kit for Agilent GCs (1 to 45 psi)

Replacement Microseals for Merlin Microseal Septa, Restek - 22812, General-Purpose Microseal (most applications, 3 to 100 psi)

Merlin Microseal Septa for Agilent GCs, Restek - 22811, General Purpose Kit for Agilent GCs (3 to 100 psi). General purpose kit for Agilent GCs (3 to 100 psi)

Merlin Microseal Septa for Agilent GCs, Restek - 22810, General Purpose Kit for Agilent GCs (3 to 100 psi). General purpose kit for Agilent GCs (3 to 100 psi)

Replacement Microseal Nut for Merlin Microseal Septa for Agilent GCs, Restek - 22809, Replacement Microseal Nut

Replacement Chemical Traps and Parts for Agilent GCs, Restek - 22800, Split Vent Line (32-inch)

Split/Splitless Injection Port for Agilent 6850/6890 GCs, Direct Replacement or Siltek® Treated, Restek - 22674, Replacement Weldment with EPC

Split/Splitless Injection Port for Agilent 6850/6890 GCs, Direct Replacement or Siltek® Treated, Restek - 22673, Replacement Shell Weldment

Split/Splitless Injection Port for Agilent 6850/6890 GCs, Direct Replacement or Siltek® Treated, Restek - 22672, Replacement Weldment with EPC

Split/Splitless Injection Port for Agilent 6850/6890 GCs, Direct Replacement or Siltek® Treated, Restek - 22671, Replacement Shell Weldment

Split/Splitless Injection Port for Agilent 6850/6890 GCs, Direct Replacement or Siltek® Treated, Restek - 22670, Split/Splitless Weldment (for use with large canister-type filter)

VICI® Mat/Sen® Gas-Specific Purifier Modules, Restek - 22601, Helium Purifier Module

Single Taper Inlet Liner with Wool for Agilent GCs Equipped with Split/Splitless Inlets, Restek - 22406, Single Taper Splitless, Straight

Direct Replacement Reducing Nut for Agilent 5890/6850/6890/7890 GCs, Restek - 22078, Reducing Nut

Air Diverter for Agilent GCs, Restek - 22076, Air Diverter

Filter Base Plates, Restek - 22027, Filter Base Plate, 3-Position

Filter Base Plates, Restek - 22026, Filter Base Plate, 2-Position

Filter Base Plates, Restek - 22025, Filter Base Plate, Single-Position

Replacement Gas Filters for Restek Super Clean® Gas Filter Kits, Restek - 22020, Replacement Triple Gas Filter (removes oxygen, moisture, and hydrocarbons)

Super Clean® Gas Filter Kits and Replacements, Restek - 22019, Carrier Gas Cleaning Kit

Indicating Moisture Trap, Restek - 22015, Indicating Moisture Trap

Indicating Moisture Trap, Restek - 22014, Indicating Moisture Trap

Refillable Hydrocarbon Trap, Restek - 22013, Refillable Hydrocarbon Trap

Refillable Hydrocarbon Trap, Restek - 22012, Refillable Hydrocarbon Trap

Catalyst Replacement Tower for Model 76-821 30, 000cc/min. Turn in-house compressed air supply into ultra-pure air (0.1ppm total hydrocarbons.). Removes Hydrocarbons by catalytic oxidation to less than 0.1ppm. Operators at 40 to 125psi.

Catalyst Replacement Tower for Model 76-811 18, 000cc/min. Turn in-house compressed air supply into ultra-pure air (0.1ppm total hydrocarbons.). Removes Hydrocarbons by catalytic oxidation to less than 0.1ppm. Operators at 40 to 125psi.

Catalyst Replacement Tower for Model 76-810, 3500cc/min. Turn in-house compressed air supply into ultra-pure air (0.1ppm total hydrocarbons.). Removes Hydrocarbons by catalytic oxidation to less than 0.1ppm. Operators at 40 to 125psi.

Accessories for Parker HydroGen Mateâ„¢ DI Water System, Restek - 22001, Maintenance Kit for Parker HydroGen Mate DI Water System

Parker HydroGen Mateâ„¢ DI Water System, Restek - 22000, HydroGen Mate DI Water System-Model 72-230

Capillary-Grade Hydrocarbon Trap, Restek - 21992, Capillary-Grade Hydrocarbon Trap

Capillary-Grade Hydrocarbon Trap, Restek - 21991, Capillary-Grade Hydrocarbon Trap

Wall Mounting Bracket, Restek - 21984, Wall Mounting Bracket for Super Clean Base Plates

Replacement Gas Filters for Restek Super Clean® Gas Filter Kits, Restek - 21982, Replacement Helium-Specific Gas Filter (removes oxygen, moisture, and hydrocarbons)

Male Connector. 1/4 to 1/4 NPT in. Stainless Steel. Similar to Parker: 4 MSC 4N. Similar to Swagelok : 400-1-4. Includes self-sealing shut off valve. Please call for multiple copies.

Nut. 1/16in. Stainless Steel. Similar to Parker: 1 NU 1. Similar to Swagelok : 102-1. Includes self-sealing shut off valve. Please call for multiple copies.

Graphite Sealing Ring for Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL instruments; fits 8 mm OD liners, Restek - 21899, Graphite Sealing Ring

Inlet Fittings for Shimadzu GCs, Injector Nut Kit for Shimadzu 17A GCs. includes a 17A injector nut. Includes a 0.4mm graphite ferrule. Includes a 1/16-inch stainless steel capillary nut.

Capillary Column Nuts for Agilent 5890/6850/6890/7890 GCs, Restek - 21884, Capillary Column Nut

Injector/Detector Plug Nuts, Restek - 21883, Injector/Detector Plug Nuts

Male Connector. 1/4 to 1/4 NPT in. Brass. Similar to Parker: 4 MSC 4N. Similar to Swagelok : 400-1-4. Includes self-sealing shut off valve. Please call for multiple copies.

Tee. 1/8in. Brass. Similar to Parker: 2 ET 2. Similar to Swagelok : 200-3. Includes self-sealing shut off valve. Please call for multiple copies.

Reducing Union. 1/4 to 1/8in. Brass. Similar to Parker: 4 RU 2. Similar to Swagelok: 400-6-2. Includes self-sealing shut off valve. Please call for multiple copies.

Union. 1/8 to 1/8in. Brass. Similar to Parker: 2 SC 2. Similar to Swagelok: 200-6. Includes self-sealing shut off valve. Please call for multiple copies.

Plug. 1/8in. Brass. Similar to Parker: 2 BLP 2. Similar to Swagelok: 200-P. Includes self-sealing shut off valve. Please call for multiple copies.

Nut & Ferrule Set. 1/4in. Brass. Includes self-sealing shut off valve. Please call for multiple copies.

Nut & Ferrule Set. 1/8in. Brass. Includes self-sealing shut off valve. Please call for multiple copies.

Inserts for 2.0 ml, 11 mm Crimp-Top and 2.0 ml, 9 mm Short-Cap, Screw-Thread Vials, Restek - 21779, 250 µl, Big mouth insert with glass flange (step design), for use with 10 mm (425) and 11 mm vials

Inserts for 2.0 ml, 11 mm Crimp-Top and 2.0 ml, 9 mm Short-Cap, Screw-Thread Vials, Restek - 21776, 250 µl, Big mouth insert with bottom spring, for use with 9 mm, 10 mm (425) and 11 mm vials

Inserts for 2.0 ml, 8 mm Screw-Thread Vials, Restek - 21775, 100 µl, Insert with PP bottom spring

Aluminum Seals with Septa, 20 mm, preassembled, Restek - 21764, Seals w/Septa

Aluminum Seals with Septa, 20 mm, preassembled, Restek - 21762, Seals w/Septa

WISP 48 Caps and Septa, Restek - 21743, WISP 48 Caps and Septa, Preassembled

1078/1079 Split Liner. 3.4 mm ID. 5.0 mm OD. 54 mm Length. Similar to Varian Part Number: 03-918464-00.

Split/Splitless SilcoSleeve w/Wool. 5.2mm ID. 6.3mm OD. 78.5mm Length. Won't crack, chip or break like glass liners. Equivalent inertness to glass liners. Excellent response for pesticides, phenols, and other active compounds. Inexpensive and cost-effective.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.018-Inch ID. (Similar to HP part #18710-20119.). High-Performance. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.018-Inch ID. (Similar to HP part #18710-20119.). Standard. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.018-Inch ID. (Similar to HP part #18710-20119.). Standard. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Purge Port Weldment. Similar to HP part # 19243-80570.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.030-Inch ID. (Similar to HP part #18789-80070.). Standard. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.030-Inch ID. (Similar to HP part #18789-80070.). Standard. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.030-Inch ID. (Similar to HP part #18789-80070.). High-Performance. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.030-Inch ID. (Similar to HP part #18789-80070.). High-Performance. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Viton Replacement O-rings. similar to HP part # 19243-80570.

Capillary Dedicated FID Replacement Jet for Agilent 5890/6850/6890/7890 GCs, Restek - 21683, High-Performance Siltek Treated, 0.011 IN. ID Tip

Dual-Stage Ultra-High Purity Chrome-Plated Brass Gas Regulators with CGA Fittings, Restek - 21669, Ultra-High-Purity Regulator

Dual-Stage Ultra-High Purity Chrome-Plated Brass Gas Regulators with CGA Fittings, Restek - 21668, Ultra-High-Purity Regulator

Dual-Stage Ultra-High Purity Chrome-Plated Brass Gas Regulators with CGA Fittings, Restek - 21667, Ultra-High-Purity Regulator

Ultra-High Purity Chrome-Plated Brass Line Gas Regulator, Restek - 21666, Ultra-High-Purity Line Gas Regulator

CarboFrit Puller/Inserter Tool. Highly inert. Extends analytical column lifetime. Enhances split and splitless injection reproducibility. Improve retention of high molecular weight contaminants. Uniform pore size guarantees consistent flow through the liner. Consistent packing density.

Replacement Chemical Trap for HP 5890 GCs. (similar to HP part # 05890-61260.).

Rinsed and Cleaned 304 Stainless Steel Tubing, Restek - 21512, Tubing, Welded/Drawn

Rinsed and Cleaned 304 Stainless Steel Tubing, Restek - 21506, Tubing, Welded/Drawn

GC Installation Kit. Contains the tubing and fittings needed to add an additional GC to your lab bench. Also included are four 1/8-inch tees, so carrier, fuel, and other GC gases can be routed to the new inlet or detector from existing gas lines.

EZ No-Vent® GC Column-Mass Spectrometer Connector for Agilent GCs, Restek - 21323, EZ No-Vent Connector Kit

Silcosteel-treated Inlet Seals. For Agilent 5890/6890 split/splitless injection ports. 0.8mm Inertness similar to that of a fused silica capillary column. Offers reduced breakdown and adsorption of active compounds and increased column lifetime. 10/pk.

Silcosteel Treated Inlet Seal. 0.8mm ID. Single-Column Installation. Special grade of stainless steel that is softer and deforms more easily, ensuring a completely leak-free seal. Increases column lifetime because oxygen cannot permeate into the carrier gas.

Gold-Plated Inlet Seals. For Agilent 5890/6890 split/splitless injection ports. 0.8mm. Increased inertness over stainless steel and reduced breakdown and adsorption of active compounds. Column lifetime is increased because oxygen cannot permeate into the carrier gas. 10/pk.

Gold-Plated Inlet Seals. For Agilent 5890/6890 split/splitless injection ports. 0.8mm. Increased inertness over stainless steel and reduced breakdown and adsorption of active compounds. Column lifetime increased because oxygen cannot permeate into the carrier gas. 2/pk.

Replacement Inlet Seals for Agilent GCs, Restek - 21316, Replacement Inlet Seal

Replacement Inlet Seals for Agilent GCs, Restek - 21315, Replacement Inlet Seal

MSD Conversion Fitting, Restek - 21314, MSD Conversion Fitting

Replacement Ring Seal for MSD Conversion Fitting, Restek - 21313, Replacement Ring Seal for MSD Conversion Fitting

(inlet) Finger-Tight Nut. (for use with standard ferrules). Rapidly tighten columns without wrenches. Avoid overtightened stripped threads. Two versions available. Both versions can be used with 0.25, 0.32, or 0.53mm ID Columns. Wrench pad for VESPEL /graphite ferrules.

(inlet) Finger-Tight Nut. (for use with short HP-type ferrules). Rapidly tighten columns without wrenches. Avoid overtihtened stripped threads. Two versions available. Both versions can be used with 0.25, 0.32, or 0.53mm ID Columns. Wrench pad for VESPEL /graphite ferrules.

Septum Nut. (similar to HP part # 18740-60835, except with a 26-gauge hole.): For 26-Gauge Needles.

Silcosteel Treated Inlet Seal. 1.2mm ID. 0.25/0.32mm ID Dual-Column Installation. Special grade of stainless steel that is softer and deforms more easily, ensuring a completely leak-free seal. Increases column lifetime because oxygen cannot permeate into the carrier gas.

Silcosteel Treated Inlet Seal. 1.2mm ID. 0.25/0.32mm ID Dual-Column Installation. Special grade of stainless steel that is softer and deforms more easily, ensuring a completely leak-free seal. Increases column lifetime because oxygen cannot permeate into the carrier gas.

Gold-Plated Inlet Seals. For Agilent 5890/6890 split/splitless injection ports. 1.2mm. Increased inertness over stainless steel and reduced breakdown and adsorption of active compounds. Column lifetime is increased because oxygen cannot permeate into the carrier gas. 10/pk.

Gold-Plated Inlet Seal. 1.2mm ID. 0.25/0.32mm ID Dual-Column Installation. Special grade of stainless steel that is softer and deforms more easily, ensuring a completely leak-free seal. Increases column lifetime because oxygen cannot permeate into the carrier gas.

Direct Injection (DI) Inserts and Sleeve adapter for 1/4 Inch Packed Column Injection Ports. Uses standard 1/16-inch capillary nut and ferrules. Convenient wrench pad at base. Includes 1/4-inch graphite ferrule and stainless steel nut.

ECD/FID Dual-Purpose Make-Up Gas Kit.

Make-Up Gas Fitting. ECD/FID dual-purpose replacement fitting for Agilent 5890 6C. Consists of 6.4mm nut with graphite ferrule, and a 1.6mm nut with a 0.4mm I.D. graphite capillary ferrule.

Siltek Inlet Seal. Siltek Dual Vespel Ring Inlet Seal, 1.2mm ID, 10pk

Siltek Inlet Seal. Siltek Dual Vespel Ring Inlet Seal, 1.2mm ID, 10pk

Gold Plated Inlet Seal. Gold Plated Dual Vespel Ring Inlet Seal, 1.2mm ID, 10pk

Gold Plated Inlet Seal. Gold Plated Dual Vespel Ring Inlet Seal, 1.2mm ID, 2pk

Stainless Steal Inlet Seal. Stainless Steel Dual Vespel Ring Inlet Seal, 1.2mm ID, 10pk

Dual Vespel® Ring Inlet Seals for Agilent GCs, Restek - 21243, Dual Vespel Ring Inlet Seal

Siltek Inlet Seal. Siltek Dual Vespel Ring Inlet Seal, 0.8mm ID, 2pk

Dual Vespel® Ring Inlet Seals for Agilent GCs, Restek - 21241, Dual Vespel Ring Inlet Seal

Dual Vespel® Ring Inlet Seals for Agilent GCs, Restek - 21240, Dual Vespel Ring Inlet Seal

Stainless Steel Inlet Seal. Stainless Steel Dual Vespel Ring Inlet Seal, 0.8mm ID, 10pk

Stainless Steel Inlet Seal. Stainless Steel Dual Vespel Ring Inlet Seal, 0.8mm ID, 2pk

11 mm Crimp Vial Convenience Kits with Vials, Caps, and Septa, Restek - 21199, 2 ml, Crimp Vial Convenience Kit, Untreated

8 mm Autosampler Vial Convenience Kits, Restek - 21194, 2 ml, Autosampler Vial Convenience Kit, Untreated

8 mm Autosampler Vial Convenience Kits, Restek - 21192, 2 ml, Autosampler Vial Convenience Kit, Untreated

Septa for 8mm Screw-Thread Vials, Restek - 21178, 8 mm x 0.060 IN.. 8 mm × 0.060 IN., Septa

Aluminum Crimp Seals with Septa, 11 mm, Restek - 21175, Seals w/Septa

11 mm Crimp-Top Vials, Restek - 21153, 2 ml, Vial without graduated marking spot

25ml Fritted Sparger, 1/2-inch mount:. Fox Tekmar 2000,3000 and ALS 2016/2032. Available in 5 and 25ml. sizes. Uniform frits to ensure maximum purge efficiency. These spargers are not recommended for wastewater samples since the frit may become plugged.

5ml Fritted Sparger, 1/2-inch mount. Fox Tekmar 2000,3000 and ALS 2016/2032. Available in 5 and 25ml. sizes. Uniform frits to ensure maximum purge efficiency. These spargers are not recommended for wastewater samples since the frit may become plugged.

9 mm Short-Cap, Screw-Thread Vials, Restek - 21143, 2 ml, Short-Cap Vial w/White Graduated Marking Spot

9 mm Short-Cap, Screw-Thread Vials, Restek - 21142, 2 ml, Short-Cap Vial w/White Graduated Marking Spot

9 mm Short-Cap, Screw-Thread Vials, Restek - 21141, 2 ml, Short-Cap Vial w/White Graduated Marking Spot

Replacement Parts for FID Collector Assembly Kit for Agilent GCs, Restek - 21139, FID Collector (includes insulators)

Replacement Parts for FID Collector Assembly Kit for Agilent GCs, Restek - 21138, FID Collector (includes insulators)

Vu2 Union® Connectors, Restek - 21105, Vu2 Union Connector Kit

Drilled Uniliner® Inlet Liner with Hole near Top for Agilent GCs Equipped with Split/Splitless Inlets, Restek - 21055, Drilled Uniliner

Drilled Uniliner® Inlet Liner with Hole near Top for Agilent GCs Equipped with Split/Splitless Inlets, Restek - 21055-214, Drilled Uniliner

Frit Inlet Liner with Top Taper for Bruker/Varian GCs Equipped with 1177 Inlets, Restek - 21046-214, Split with Glass Frit

Encapsulated Ferrules for 1/16-Inch Compression Fittings, Restek. Encapsulated Ferrules for ¹/16 IN. Compression Fittings, Restek - 21036, Encapsulated Ferrules

Capillary Installation Gauge for Agilent GCs, Restek - 21034, Capillary Installation Gauge

Precision® Low Pressure Drop Inlet Liner with Wool for Agilent GCs equipped with Split/Splitless Inlets, Restek - 21033, Low Pressure Drop Precision Liner w/Deactivated Wool

Precision® Inlet Liner with Wool for Agilent GCs Equipped with Split/Splitless Inlets, Restek - 21023-213, Split Precision Liner with Deactivated Wool

Cross-Disk Inlet Seals for Agilent GCs, Restek - 21012, Cross-Disk Inlet Seal

Compact Ferrules for Agilent GCs, Fit 0.25/0.32 mm int.Ø MXT® Columns, Restek. Compact Ferrules for Agilent GCs, Fit 0.25/0.32mm ID MXT® Columns, Restek - 21008, Compact Ferrules

Compact Ferrules for Agilent GCs, Fit 0.25/0.32 mm int.Ø MXT® Columns, Restek. Compact Ferrules for Agilent GCs, Fit 0.25/0.32mm ID MXT® Columns, Restek - 21007, Compact Ferrules

Replacement Parts for FID Collector Assembly Kit for Agilent GCs, Restek - 21001, FID Ignitor

Recessed Double Gooseneck (4mm) Liner. 4.0mm ID. 6.5mm OD. 78.5mm Length. Use with two-hole ferrule for dual column analysis. Nominal ID at syringe needle expulsion point.

Recessed Gooseneck (4mm) Liner. 4.0mm ID. 6.5mm OD. 78.5mm Length. Use with two-hole ferrule for dual column analysis. Nominal ID at syringe needle expulsion point.

Recessed Gooseneck (2mm) Liner. 2.0mm ID. 6.5mm OD. 78.5mm Length. Use with two-hole ferrule for dual column analysis. Nominal ID at syringe needle expulsion point.

17A 1mm Split Liner. 1.0 mm ID. 5.0 mm OD. 94 mm Length. Nominal ID at syringe needle expulsion point.

1mm Split. 1.0mm ID. 6.3mm OD. 78.5mm Length. Nominal ID at syringe needle expulsion point.

DI Uniliner® Liners for Agilent 5890 Packed Column GC, Restek - 20965, DI Uniliner Liner

Straight Inlet Liner with Wool for Shimadzu 17A, 2010, and 2014 GCs Equipped with Split/Splitless Inlets, Restek - 20956-213, Split/Splitless, Straight

Split Liners for 8000 & TRACE Series GC's, Cup Splitter. 4.0 mm ID. 8.0 mm OD. 105mm Length. Nominal ID at syringe needle expulsion point.

Laminar Cup Inlet Liner for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Restek - 20949, Laminar Cup Splitter

Splitless Liners for 8000 & TRACE Series GCs, Splitless (5mm ID). 5.0 mm ID. 8.0 mm OD. 105mm Length. Similar to CE Part Number: 453 20033. Nominal ID at syringe needle expulsion point.

Fisons GC Splitless Inlet Sleeves. For Fisons GCs. 3.0mmID. Deactivated Borosilicate glass. Meets or exceeds original equipment specifications. Use for trace samples and for samples containing a narrow molecular weight distribution not prone to thermal decomposition.

Split Liners for 8000 & TRACE Series GC's, 5mm Split. 5.0 mm ID. 8.0 mm OD. 105mm Length. Similar to CE Part Number: 453 20030. Nominal ID at syringe needle expulsion point.

Split Liners for 8000 & TRACE Series GC's, 3mm Split. 3.0 mm ID. 8.0 mm OD. 105mm Length. Similar to CE Part Number: 453 20031. Nominal ID at syringe needle expulsion point.

Split Liners for 8000 & TRACE Series GC's, 1mm Split. 1.0 mm ID. 8.0 mm OD. 105mm Length. Similar to CE Part Number: 45320075. Nominal ID at syringe needle expulsion point.

Splitless Sleeves. For Agilent GCs. 2.0mmID, 6.3mmOD, 78.5mm long. Quartz glass. For trace samples and samples containing a narrow molecular weight distribution not prone to thermal decomposition. Wool packing is recommended. Aids in vaporization and minimizes discrimination.

Splitless Sleeves. For Agilent GCs. 4.0mmID, 6.3mmOD, 78.5mm long. Quartz glass. For trace samples and samples containing a narrow molecular weight distribution not prone to thermal decomposition. Packing with wool is recommended. Aids in vaporization and minimizes discrimination.

Split Liners for Perkin-Elmer GCs, Auto SYS Cyclosplitter. 4.0 mm ID. 6.2 mm OD. 92.1mm Length. Nominal ID at syringe needle expulsion point.

Cyclo Double Gooseneck Splitless Sleeves. For Agilent GCs. 2.0mmID, 6.3mmOD, 78.5mm long. Deactivated borosilicate glass. For trace active dirty samples.

Splitless Liners for Perkin-Elmer GCs, Auto SYS Cyclo Double Gooseneck. 3.5 mm ID. 6.2 mm OD. 92.1mm Length. Nominal ID at syringe needle expulsion point.

Splitless Sleeves. For Agilent GCs. 4.0mmID, 6.3mmOD, 78.5mm long. Deactivated borosilicate glass. For trace active dirty samples.

Inlet Stainless Steel Capillary Nut. For the HP5890 GC. Use with standard ferrules.

Stainless Steel Capillary Nut. (Similar to Varian part #03-949551-00.).

Brass Capillary Nut. (Similar to Varian part #03-949551-00.).

99mm Splitless (3mm ID) Liner. 3.0 mm ID. 5.0 mm OD. 99 mm Length. Similar to Shimadzu Part Number: 221-32544-00. Nominal ID at syringe needle expulsion point.

GC Split Inlet Sleeves. For Shimadzu GCs. 3.5mmID. Deactivated Borosilicate glass.

SPI Liners for Varian GCs, SPI Liner with Buffer. 2.4 mm ID. 4.6 mm OD. 54 mm Length. Similar to Varian Part Number: 01-900109-08.

Open-Top Uniliner Direct Injection Sleeves. For use with Agilent GCs, split/splitless injection ports. 4.0mmID. Use for trace, dirty, active samples.

GC Cyclo-Uniliner Inlet Sleeves. For PerkinElmer GCs, Auto SYS. 4mm ID. Deactivated Borosilicate glass. Manufactured with specifications that meet or exceed the original equipment's design. For use on trace, dirty active samples with high molecular weight.

GC Open-Top Uniliner Inlet Sleeves. For PerkinElmer GCs, Auto SYS. 4mmID. Deactivated Borosilicate glass. Manufactured with specifications that meet or exceed the original equipment's design. For trace, dirty, active samples.

Split Liners for Perkin-Elmer GCs, Auto SYS Cup Splitter. 4.0 mm ID. 6.2 mm OD. 92.1mm Length. Nominal ID at syringe needle expulsion point.

Split Liners for Perkin-Elmer GCs, Auto SYS Splitter with Wool. 3.5 mm ID. 6.2 mm OD. 92.1mm Length. Similar to PE Part Number: N6101052. Nominal ID at syringe needle expulsion point.

Splitless Liners for Perkin-Elmer GCs, Auto SYS Splitless w/Wool (2mm ID). 2.0 mm ID. 6.2 mm OD. 92.1mm Length. Similar to PE Part Number: N6101372. Nominal ID at syringe needle expulsion point.

Split Liners for Perkin-Elmer GCs, Auto SYS Laminar Cup Splitter. 4.0 mm ID. 6.2 mm OD. 92.1mm Length. Nominal ID at syringe needle expulsion point.

Laminar Cup Splitter. 4.0mm ID. 6.3mm OD. 78.5mm Length. Nominal ID at syringe needle expulsion point.

Gooseneck Splitless Sleeves. For Agilent GCs. 4.0mmID, 6.3mmOD, 78.5mm long. Deactivated borosilicate glass. For better containment of the sample vaporization cloud. Reduces sample backflash onto the septa or injector surfaces. Minimal adsorption and discrimination. Pack with wool for dirty samples.

Single Taper Inlet Liner for Agilent GCs equipped with split/splitless inlets, Restek - 20799-214, Single Taper Splitless, Straight

Gooseneck Splitless Sleeves. For Agilent GCs. 2.0mmID, 6.3mmOD, 78.5mm long. Deactivated borosilicate glass. For better containment of the sample vaporization cloud. Reduces sample backflash onto the septa or injector surfaces. Minimal adsorption and discrimination. Pack with wool for dirty samples.

Splitter Inlet Sleeves. For Varian GCs. 4mmID, 6.3mmODx72mm long. Deactivated Borosilicate glass. Packed with fused silica wool to provide a high surface area for rapid vaporization of the sample, delivering a uniform vapor cloud to the split point.

Deactivated Glass Wool. Wool is used to promote uniform vaporization in split or splitless sleeves. Recommended for autosamplers with fast injection rates. Wool also traps non-volatile or inorganic residue present in the sample reducing column contamination. 10g size will fill over 600 sleeves.

Cyclo Vu-Tight DI Liner (1/4-inch OD). Visually observe the press-tight connection between the column end and liner. Fits 0.32 and 0.53mm ID capillary columns (fits column ODs from 0.5mm to 0.8mm). Slotted top prevents obstruction of carrier gas flow. Two designs are available.

Double Gooseneck Splitless Sleeves. For Agilent GCs. 4.0mmID, 6.3mmOD, 78.5mm long. Deactivated borosilicate glass. For better containment of the sample vaporization cloud. Reduces sample backflash. Minimal adsorption and discrimination. Pack with wool for dirty samples. For trace active samples.

Double Taper Inlet Liner for Agilent GCs equipped with split/splitless inlets, Restek - 20785-214, Double Taper Splitless, Straight

Split Sleeve with Fused Silica Wool. 4.0mmID, 6.3mmOD, 78.5mm long. Deactivated borosilicate glass. Designed for the Agilent 7673 autosampler. Packed with fused silica wool to provide a high surface area for rapid vaporization of the sample delivering a uniform vapor cloud to the split point.

SPI Liners for Varian GCs, 0.8mm SPI. 0.80 mm ID. 4.6 mm OD. 54 mm Length. Similar to Varian Part Number: 01-900109-07.

SPI Inlet Sleeves. For Varian GCs. 5mmID, 4.6mmODx54mm long. Deactivated Borosilicate glass. For 0.25 and 0.32mmID columns. Use when high linearity is desired.

Splitless Sleeves. For Agilent GCs. 4.0mmID, 6.3mmOD, 78.5mm long. Deactivated borosilicate glass. For trace samples and samples containing a narrow molecular weight distribution not prone to thermal decomposition. Packing with wool aids in vaporization and minimizes discrimination.

Drilled Uniliner® Inlet Liner with Hole near Bottom for Agilent GCs Equipped with Split/Splitless Inlets, Restek - 20771, Drilled Uniliner (hole near bottom)

Splitless Inlet Sleeves. For Varian GCs. 2mmID, 6.3mmODx74mm long. Deactivated Borosilicate glass. For trace samples and samples containing a narrow molecular weight distribution not prone to thermal decomposition. Packing with wool is recommended for rapid vaporization of the sample.

Splitless Sleeves. For Agilent GCs. 2.0mmID, 6.3mmOD, 78.5mm long. Deactivated borosilicate glass. For trace samples and samples containing a narrow molecular weight distribution not prone to thermal decomposition. Wool packing is recommended. Aids in vaporization and minimizes discrimination.

Cup Splitter Sleeves. For Agilent GCs. 4.0mmID, 6.3mmOD, 78.5mm long. Deactivated borosilicate glass. The Jenning's cup design is excellent for mixing of the sample. Tortuous flow path aids in sample vaporization and minimizes molecular weight discrimination. Can be packed with wool.

Cyclosplitter Sleeves. For Agilent GCs. 4.0mmID, 6.3mmOD, 78.5mm long. Deactivated borosilicate glass. Cylindrical glass screw design provides a large area for sample vaporization. Use for dirty samples. Multiple injections can be shot before cleaning is required. Not for large volume injections.

Cyclo Inlet Liner for Agilent GCs Equipped with Split/Splitless Inlets, Restek - 20707-214, Cyclo Inlet Liner

High-Capacity Split Vent Trap. Reduces the release of hazardous materials in to the lab. Lasts one month or 1,5000 injections. Includes connecting lines and mounting kit.

High-Capacity Split Vent Trap. Reduces the release of hazardous materials in to the lab. Lasts one month or 1,5000 injections. Includes connecting lines and mounting kit.

Photoionization, PID Lamps, Restek - 20675, PID Lamp

Capillary Adaptable FID Replacement Jet For HP 5890/6890 GCs (0.011-inch ID tip). (Similar to HP part #19244-80560.). High-performance.

Capillary Adaptable FID Replacement Jet for Agilent 5890/6850/6890 GCs, Restek - 20672, High-Performance Siltek Treated, 0.011-Inch ID Tip

Capillary Adaptable FID Replacement Jet For HP 5890/6890 GCs (0.011-inch ID tip). (Similar to HP part #19244-80560.). Standard.

Capillary Adaptable FID Replacement Jet For HP 5890/6890 GCs (0.011-inch ID tip). (Similar to HP part #19244-80560.). Standard.

Dual-Stage Ultra-High Purity Stainless Steel Gas Regulators with CGA Fittings, Restek - 20662, Ultra-High-Purity Regulator

1/8-inch Capillary Inlet adapter Fitting Kit. (Split/splitless fitting for 0.53mm ID capillary columns).

MSD Source Nut, Restek - 20643, (Detector) MSD Source Nut

Septum Nut. (similar to HP part # 18740-60835.). For 23-Gauge Needle s.

Refillable Hydrocarbon Trap. Carbon refill (two recharges). 11 x 1 1/2. Removes trace carrier gas impurities. 20umfrit prevents particulate contamination. Stops carrier gas interferences with purge & trap systems. Refillable and rechargeable.

Capillary Column Rinsing Reservoir, Reservoir only.

Capillary Column Rinsing Reservoir, Complete kit.

MINICYL Regulator, 1/4 fittings.

MINICYL Regulator, 1/8 fittings.

High Capacity Oxygen Trap. 1/8 fittings. 11 x 1 1/2. Most effective oxygen trap available. Long life-typically lasts longer than five 200ft.3 cylinders. Removes up to 600mg of oxygen and 2g moisture. Reduces oxygen to 15ppb concentration.

High Capacity Oxygen Trap. 1/4 fittings. 11 x 1 1/2. Most effective oxygen trap available. Long life-typically lasts longer than five 200ft.3 cylinders. Removes up to 600mg of oxygen and 2g moisture. Reduces oxygen to 15ppb concentration.

Cross-Disk Inlet Seals for Agilent GCs, Restek - 20476, Cross-Disk Inlet Seal

Universal Angled 'Y' Press-Tight® Connectors, Restek - 20469, Universal Angled “Y” Press-Tight Connector

Polyimide Resin, Restek - 20445, Polyimide Resin

Deactivated, Universal Press-Tight Connectors. High-temperature silanization for excellent inertness. Ideal for trace analysis of active compounds. Ideal for the analysis of pesticides, semivolatile pollutants and clinical/forensic samples.

Vacuum Vu-Union Ferrules. 0.8mm ID. Fits Column ID: 0.53 ID-0.8 OD. For use with Vacuum Vu-Union connectors. 60% VESPEL /40% graphite. 400[degree]C maximum operating temperature.

Vacuum Vu-Union Ferrules. 0.5mm ID. Fits Column ID: 0.32 ID-0.5 OD. For use with Vacuum Vu-Union connectors. 60% VESPEL /40% graphite. 400[degree]C maximum operating temperature.

Vacuum Vu-Union Ferrules. 0.4mm ID. Fits Column ID: 0.25 ID-0.4 OD. For use with Vacuum Vu-Union connectors. 60% VESPEL /40% graphite. 400[degree]C maximum operating temperature.

Universal Y Press-Tight Connectors. Split sample flow onto two different columns. Split a single column flow into two different detectors. Perform confirmational analysis with a single injection. Fits 0.18, 0.25, 0.32, & 0.53mm ID columns.

Universal Y Press-Tight Connectors. Split sample flow onto two different columns. Split a single column flow into two different detectors. Perform confirmational analysis with a single injection. Fits 0.18, 0.25, 0.32, & 0.53mm ID columns.

Universal Angled Y Press-Tight Connectors. Alleviates column-end connection strain. Inlet and outlet ends conform to the column radius. Perform confirmational analysis with a single injection.

Universal Angled Y Press-Tight Connectors. Alleviates column-end connection strain. Inlet and outlet ends conform to the column radius. Perform confirmational analysis with a single injection.

Universal Press-Tight Connectors. Connects gaurd columns to analytical columns. Repair broken columns. Connect column outlets to transfer lines.

Universal Press-Tight® Connectors, Restek - 20400, Universal Press-Tight Connectors

1/32Stainless Steel Replacement Ferrules for MXT Connectors. 0.79mm ID. Fits Column: 0.53mm ID.

1/32Stainless Steel Replacement Ferrules for MXT Connectors. 0.59mm ID. Fits Column: 0.28mm ID.

MXT Low-Dead-Volume Connector, for 0.28mm ID MXT columns. Connect guard columns/transfer lines to MXT columns. Low thermal mass tracks rapid oven temperature programming.

MXT Low-Dead-Volume Y Connector, for 0.28mm ID MXT columns. Connect two MXT columns to one inlet. Connect one MXT column to two detectors.

Replacement Inlet Seal 1/6 hole. Fittings use standard size two-hole capillary ferrules. Capillary columns install easily. Column insertion depth is identical to original equipment.

Stainless Steel Inlet Seals. For Agilent 5890/6890 split/splitless injection ports. 1.2mm, special grade stainless steel leak-tight seal. Use for normal analysis. Column lifetime increased because oxygen cannot permeate into carrier gas. Signal noise reduced with high sensitivity detectors. 10/pk.

Replacement Inlet Seal 1.2mm hole. Fittings use standard size two-hole capillary ferrules. Capillary columns install easily. Column insertion depth is identical to original equipment.

1/32Replacement Nut.

Open-End Wrenches, Restek - 20388, Open-End Wrenches, 1/4 – 3/16 IN.

Vu-Tight DI Liner (1/4-inch OD). Visually observe the press-tight connection between the column end and liner. Fits 0.32 and 0.53mm ID capillary columns (fits column ODs from 0.5mm to 0.8mm). Slotted top prevents obstruction of carrier gas flow. Two designs are available.

Cyclo-Uniliner Injector Conversion Kit. Converts a 6.3mm packed column injection port to capillary. For direct injection. Kit: 6.3mm nut and graphite ferrule, 1.5mm nut, and 0.8mm I.D. graphite ferrule. For ports 8cm long. Sleeve adapter required. Column ID: 0.32/0.53mm.

Open-Top Uniliner Injector Conversion Kit. Converts a 6.3mm packed column injection port to capillary. For direct injection. Kit: 6.3mm nut and graphite ferrule, 1.5mm nut, and 0.8mm I.D. graphite ferrule. For ports 8cm long. Sleeve adapter required. Column ID: 0.32/0.53mm.

Uniliner Sleeve adapter. For injection ports 8-15cm. Includes a 1/4-inch SS nut & graphite ferrule, a 1/16-inch SS nut, and a 0.8mm ID graphite ferrule. Reduces solvent tailing. Versatile-0.53mm ID version can be used in the direct or on-column injection mode.

Sleeve Adapter. Required for using Uniliner sleeves in 6.3mm injection ports. For use with Uniliner Packed Injector Conversion Kits.

Uniliner Injector Conversion Kit. Large buffer volume chamber. Converts 6.3mm packed column injection port to capillary. Direct and on-column injections. 6.3mm nut and graphite ferrule, 1.5mm nut, and 0.8mm ID graphite ferrule. For ports 8cm long. Sleeve adapter required. Column ID: 0.53mm.

O-Rings, 6.5mm ID for splitless liners. Graphite: Graphite o-rings have excellent thermal stability and can be used at injection port temperatures up to 450[degree]C. Similar to HP Part Number: 5180-4173.

O-Rings, 6.5mm ID for splitless liners. Graphite: Graphite o-rings have excellent thermal stability and can be used at injection port temperatures up to 450[degree]C. Similar to HP Part Number: 5180-4173.

O-Rings, 6.3mm ID for split liners. Graphite: Graphite o-rings have excellent thermal stability and can be used at injection port temperatures up to 450[degree]C. Similar to HP Part Number: 5180-4168.

O-Rings, 6.3mm ID for split liners. Graphite: Graphite o-rings have excellent thermal stability and can be used at injection port temperatures up to 450[degree]C. Similar to HP Part Number: 5180-4168.

Replacement-Frits, for CarboFrit Inlet Liner. = 4mm ID. Highly inert. Extends analytical column lifetime. Enhances split and splitless injection reproducibility. Improve retention of high molecular weight contaminants. Uniform pore size guarantees consistent flow through the liner.

Ferrules for Thermo Scientific GCs, Fit =0.28 mm ID Fused Silica Columns, Restek. Ferrules for Thermo Scientific GCs, Fit =0.28 mm int.Ø Fused Silica Columns, Restek - 20281, Ferrules

Ferrules for Thermo Scientific GCs, Fit =0.28 mm ID Fused Silica Columns, Restek. Ferrules for Thermo Scientific GCs, Fit =0.28 mm int.Ø Fused Silica Columns, Restek - 20280, Ferrules

SeCure® 'Y' Connector Kits, Restek. SeCure® “Y” Connector Kits, Restek - 20278, SeCure “Y” Connector Kit

SeCure® 'Y' Connector Kits, Restek. SeCure® “Y” Connector Kits, Restek - 20277, SeCure “Y” Connector Kit

SeCure® 'Y' Connector Kits, Restek. SeCure® “Y” Connector Kits, Restek - 20276, SeCure “Y” Connector Kit

Split/Splitless Injection Port for Agilent 5890 GCs, Direct Replacement or Siltek® Treated, Restek - 20266, Replacement Shell Weldment

Split/Splitless Injection Port for Agilent 6850/6890 GCs, Direct Replacement or Siltek® Treated, Restek - 20265, Replacement Weldment*

Compact Graphite Ferrules for HP GCs. 0.8mm ID. VESPEL /Graphite. Fits Column ID (mm): 0.53. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Compact Graphite Ferrules for HP GCs. 0.8mm ID. VESPEL /Graphite. Fits Column ID (mm): 0.53. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

1/32, 0.5mm VESPEL /graphite ferrule. for use with fused silica tubing in an MXT connector.

Standard Ferrules-For 1/16, 1/8, and 1/4 Fittings. 3/16 ID. VESPEL /Graphite. Fitting size(in.):1/4. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Reducing Ferrules. 0.5mm ID. VESPEL /Graphite. Fits Column ID(mm): 0.32. Fitting Size (in):1/4. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Reducing Ferrules. 0.5mm ID. VESPEL /Graphite. Fits Column ID(mm): 0.32. Fitting Size (in):1/8. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Reducing Ferrules. 0.4mm ID. VESPEL /Graphite. Fits Column ID(mm): 0.25. Fitting Size (in):1/8. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Graphite Ferrules. 0.8mm graphite ferrules will not crack or split under torque. Compact for use with Agilent capillary injection ports. Upper temperature limit of 400[degree]C. Column ID: 0.53mm.

Graphite Ferrules. 0.8mm graphite ferrules will not crack or split under torque. Compact for use with Agilent capillary injection ports. Upper temperature limit of 400[degree]C. Column ID: 0.53mm.

Compact Graphite Ferrules for HP GCs. 0.4mm ID. Graphite. Fits Column ID (mm): 0.25. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability. Seals with minimal torque, reusable, and preferred for vacuum and high-pressure uses.

Compact Graphite Ferrules for HP GCs. 0.4mm ID. Graphite. Fits Column ID (mm): 0.25. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability. Seals with minimal torque, reusable, and preferred for vacuum and high-pressure uses.

Compact Graphite Ferrules for HP GCs. 0.5mm ID. VESPEL /Graphite. Fits Column ID (mm): 0.32. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Compact Graphite Ferrules for HP GCs. 0.5mm ID. VESPEL /Graphite. Fits Column ID (mm): 0.32. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Two-Hole Ferrules-For 1/16 Compression-Type Fittings. 0.8mm ID. VESPEL /Graphite. Fits Column ID(mm): 0.53. Fitting Size(in.): 1/8. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Blank Ferrules-For 1/16 Capillary Fittings. no hole ID. VESPEL /Graphite. Fitting Size (in):1/16. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Compact Graphite Ferrules for HP GCs. 0.4mm ID. VESPEL /Graphite. Fits Column ID (mm): 0.25. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Compact Graphite Ferrules for HP GCs. 0.4mm ID. VESPEL /Graphite. Fits Column ID (mm): 0.25. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Standard Ferrules for PerkinElmer GCs, Fit 0.25/0.32 mm int.Ø MXT® Columns, Restek. Standard Ferrules for PerkinElmer GCs, Fit 0.25/0.32mm ID MXT® Columns, Restek - 20231, Ferrules

Capillary Ferrules (for 1/16 compression-type fittings). 0.8mm ID. VESPEL /Graphite. Fits Column ID (mm): 0.53. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Capillary Ferrules (for 1/16 compression-type fittings). 0.4mm ID. VESPEL /Graphite. Fits Column ID (mm): 0.25. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Capillary Ferrules (for 1/16 compression-type fittings). 0.4mm ID. Graphite. Fits Column ID (mm): 0.25. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Standard Ferrules-For 1/16, 1/8, and 1/4 Fittings. red to 1/16 ID. Graphite. Fitting size(in.):1/4. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Standard Ferrules-For 1/16, 1/8, and 1/4 Fittings. red. to 1/8 ID. Graphite. Fitting size(in.):1/4. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Capillary Ferrules (for 1/16 compression-type fittings). 0.8mm ID. Graphite. Fits Column ID (mm): 0.53. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Standard Ferrules-For 1/16, 1/8, and 1/4 Fittings. red. to 1/8 ID. VESPEL /Graphite. Fitting size(in.):1/4. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Standard Ferrules-For 1/16, 1/8, and 1/4 Fittings. 1/4 ID. VESPEL /Graphite. Fitting size(in.):1/4. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Standard Ferrules-For 1/16, 1/8, and 1/4 Fittings. red. to 1/16 ID. VESPEL /Graphite. Fitting size(in.):1/8. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Standard Ferrules-For 1/16, 1/8, and 1/4 Fittings. 1/8 ID. VESPEL /Graphite. Fitting size(in.):1/8. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Standard Ferrules-For 1/16, 1/8, and 1/4 Fittings. 1/16 ID. VESPEL /Graphite. Fitting size(in.): 1/16. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Reducing Ferrules. 0.8mm ID. VESPEL /Graphite. Fits Column ID(mm): 0.53. Fitting Size (in):1/4. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Reducing Ferrules. 0.8mm ID. VESPEL /Graphite. Fits Column ID(mm): 0.53. Fitting Size (in):1/8. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Vespel/Graphite Ferrules. 0.8mm Vespel/Graphite (60%/40%) ferrules seal easily with minimal torque, are reusable and are preferred for vacuum and high pressure uses. Upper temperature limit of 400[degree]C. Column ID: 0.53mm.

Vespel/Graphite Ferrules. 0.5mm Vespel/Graphite (60%/40%) ferrules seal easily with minimal torque, are reusable and are preferred for vacuum and high pressure uses. Upper temperature limit of 400[degree]C. Column ID: 0.32mm.

Vespel/Graphite Ferrules. 0.4mm Vespel/Graphite (60%/40%) ferrules seal easily with minimal torque, are reusable and are preferred for vacuum and high pressure uses. Upper temperature limit of 400[degree]C. Column ID: 0.25mm.

Graphite Ferrules. Standard graphite ferrules for 6.35mm O.D. tubing. Will not crack or split under torque. Upper temperature limit of 400[degree]C.

Standard Ferrules-For 1/16, 1/8, and 1/4 Fittings. red. to 1/16 ID. Graphite. Fitting size(in.):1/8. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Standard Ferrules-For 1/16, 1/8, and 1/4 Fittings. 1/8 ID. Graphite. Fitting size(in.):1/8. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Reducing Ferrules. 0.8mm ID. Graphite. Fits Column ID(mm): 0.53. Fitting Size (in):1/8. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Reducing Ferrules. 0.4mm ID. Graphite. Fits Column ID(mm): 0.25. Fitting Size (in):1/8. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Reducing Ferrules. 0.8mm ID. Graphite. Fits Column ID(mm): 0.53. Fitting Size (in):1/4. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Graphite Ferrules. 0.8mm graphite ferrules will not crack or split under torque. Upper temperature limit of 400[degree]C. Column ID: 0.53mm.

Graphite Ferrules. 0.5mm graphite ferrules will not crack or split under torque. Upper temperature limit of 400[degree]C. Column ID: 0.32mm.

Capillary Ferrules (for 1/16 compression-type fittings). 0.4mm ID. Graphite. Fits Column ID (mm): 0.25. VESPEL /graphite ferrules are a 60%/40% blend offering the best combination of sealing performance and ease of workability.

Methane Cylinder, Replacement Cylinder.

Methane Cylinder, Complete Kit.

1/16 Tubing Cutting Pliers. Ideal for cutting 1/16 tubing. Cuts quickly, reducing distortion. Cuts clean, eliminating need for deburring.

RESTEK 1/16 Tubing Cutter, Replacement Wheels. Produces square, even cuts for 1/16-inch tubing. Eliminates tubing distortion. Replaceable cutting wheel.

Tubing Cutter Dressing Tool, Replacement Insert. Opens bore and removes burrs.

Tubing Cutter Dressing Tool, 1/16 Tool. Opens bore and removes burrs.

SSI Tube Cutting Machine, Replacement wheels. Works with 1/8-inch and 1/16-inch tubing. Electrically operated bench-top model. Handy dressing tool on the swing arm to deburr and ream tubing.

Imp Tubing Cutter, Replacement Wheels. Excellent for cutting 1/8-inch or 1/4-inch metal tubing. Compact size is ideal for tight spaces. Replaceable cutting wheel.

Inlet Liner Removal Tool, Restek - 20181, Inlet Liner Removal Tool

50mL Bubble Flowmeter. 1mL flowmeter measures flows between 0.1 and 10cc/min. 50mL flowmeter is designed for flows between 10 and 300cc/min.

1mL Bubble Flowmeter. 1mL flowmeter measures flows between 0.1 and 10cc/min. 50mL flowmeter is designed for flows between 10 and 300cc/min.

Luer syringe needles (26 gauge). For use with VOA-CYL III standards. Push -style on-off button valve. RESTEK's A-2 syringes are customized with a Luer tip.

Pocket Magnifier.

Mini Hand Drill Set, Restek - 20122, Mini Hand Drill Set

FID/Injector Cleaning Kit. The FID/Injector Cleaning Kit includes: Nylon tube brushes(1/8 ,3/16, 1/4). Pipe cleaners. Stainless steel tube brushes(1/8, 3/16, 1/4). Stainless steel surface brush. Stainless steel jet reamers. Emery Cloth.

Septum Puller. This versatile tool has a hooked end for removing septa and O-rings and a sharp pointed end for removing ferrules.

Ceramic Scoring Wafer. Scoring wafer has four smooth edges for scoring fused silica tubing, and four serrated edges for metal capillary columns. A Sure Grip handle is included.

Wool Puller/Inserter. For inserting and removing wool from sleeves and autosamplers.

Capillary Column Stainless Steel Jet Reamers. Serrated design is optimal for removing silica deposits and other contaminants from detector jets and other small orifices.

Capillary Column Stainless Steel Brushes. For cleaning dirty collectors, injectors and detector ports. The brush can be used to remove residue that builds up on metal detector jets and electronic contacts. Each package includes 3.2, 9.5, and 19mm tube brush and surface brush.

Capillary Column Open End Wrench. For tightening 6.3mm to 7.9mm capillary fittings.

Capillary Column High Temperature String. Used to restring capillary columns, attach column connectors to column cages, or hold the column in the GC oven. Capable of withstanding temperatures to 400[degree]C.

Capillary Column Nylon Tube Brushes and Pipe Cleaner. For removing small septa fragments and residue from dirty glass inlet liners. Brushes have an outer diameter of 3.2mm, 4.8mm and 6.4mm; pipe cleaner is 25mm long.

Capillary Column Tapered Needle File. For removing ferrules lodged in injector or detector ports.

Slide-Lock Tweezers and 15cm Compact Steel Ruler.

HayeSepN. 0.75mm ID. 0.95mm OD. 2-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepN. 0.75mm ID. 0.95mm OD. 1-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepN. 1.00mm ID. 1/16-in OD. 2-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepN. 1.00mm ID. 1/16-in OD. 1-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepQ. 0.75mm ID. 0.95mm OD. 2-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepQ. 0.75mm ID. 0.95mm OD. 1-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepQ. 1.00mm ID. 1/16-in OD. 2-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepQ. 1.00mm ID. 1/16-in OD. 1-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepS. 0.75mm ID. 0.95mm OD. 2-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepS. 0.75mm ID. 0.95mm OD. 1-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepS. 1.00mm ID. 1/16-in OD. 2-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

HayeSepS. 1.00mm ID. 1/16-in OD. 1-Meter Length. 100/120 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

13X MoleSieve. 0.75mm ID. 0.95mm OD. 2-Meter Length. 80/100 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

13X MoleSieve. 0.75mm ID. 0.95mm OD. 1-Meter Length. 80/100 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

13X MoleSieve. 1.00mm ID. 1/16-in OD. 2-Meter Length. 80/100 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

13X MoleSieve. 1.00mm ID. 1/16-in OD. 1-Meter Length. 80/100 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

5A MoleSieve. 0.75mm ID. 0.95mm OD. 2-Meter Length. 80/100 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

5A MoleSieve. 0.75mm ID. 0.95mm OD. 1-Meter Length. 80/100 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

5A MoleSieve. 1.00mm ID. 1/16-in OD. 2-Meter Length. 80/100 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

5A MoleSieve. 1.00mm ID. 1/16-in OD. 1-Meter Length. 80/100 Mesh. Increased efficiency over traditional packed columns. Higher capacity than PLOT columns. Made from inert, flexible Silcosteel tubing.

Rtx-1 F&F (Fused Silica). 0.25mm ID. 30-Meter Length. 0.25um. Specifically tailored to meet the demanding selectivity criteria for the flavor and fragrance industry. Stringent QA ensures column-to-column reproducibility. Excellent thermal stability and column lifetimes.

Rtx-BAC2 (Fused Silica). 0.53mm ID. 30-Meter Length. 2.00um. Optimized to provide separation of all blood alchohol components in less than three minutes. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. Only available from RESTEK!.

Rtx -65(Fused Silica). 0.53 mm ID. 30-Meter Length. 1.00um. Increased phenyl content offers unique polarity. Rtx -65TG/MXT-65TG columns are ideal for the analysis of triglycerides.

Rtx -65(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.00um. Increased phenyl content offers unique polarity. Rtx -65TG/MXT-65TG columns are ideal for the analysis of triglycerides.

RTX-65 30M 0.25MM 1.00UM - 17053

Rtx -65(Fused Silica). 0.53 mm ID. 15-Meter Length. 1.00um. Increased phenyl content offers unique polarity. Rtx -65TG/MXT-65TG columns are ideal for the analysis of triglycerides.

Rtx -65(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.50um. Increased phenyl content offers unique polarity. Rtx -65TG/MXT-65TG columns are ideal for the analysis of triglycerides.

Rtx -65(Fused Silica). 0.25 mm ID. 30-Meter Length. 0.50um. Increased phenyl content offers unique polarity. Rtx -65TG/MXT-65TG columns are ideal for the analysis of triglycerides.

Rtx -65(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.25um. Increased phenyl content offers unique polarity. Rtx -65TG/MXT-65TG columns are ideal for the analysis of triglycerides.

Rtx -65(Fused Silica). 0.25 mm ID. 30-Meter Length. 0.25um. Increased phenyl content offers unique polarity. Rtx -65TG/MXT-65TG columns are ideal for the analysis of triglycerides.

Rtx -65(Fused Silica). 0.25 mm ID. 15-Meter Length. 0.25um. Increased phenyl content offers unique polarity. Rtx -65TG/MXT-65TG columns are ideal for the analysis of triglycerides.

Rtx -65TG (Fused Silica). 0.32 mm ID. 30-Meter Length. 0.10um.

Rtx -65TG (Fused Silica). 0.25 mm ID. 30-Meter Length. 0.10um.

Rtx -65TG (Fused Silica). 0.32 mm ID. 15-Meter Length. 0.10um.

Rtx -65TG (Fused Silica). 0.25 mm ID. 15-Meter Length. 0.10um.

Rtx -1301(Fused Silica). 0.53 mm ID. 105-Meter Length. 3.00um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.53 mm ID. 60-Meter Length. 3.00um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.53 mm ID. 30-Meter Length. 3.00um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx®-1301 GC Columns, Restek - 16085-126, Rtx-1301 GC Column with 5 m Integra-Guard™ column

Rtx -1301(Fused Silica). 0.53 mm ID. 75-Meter Length. 3.00um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.32 mm ID. 105-Meter Length. 1.50um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.32 mm ID. 60-Meter Length. 1.50um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.53 mm ID. 30-Meter Length. 1.50um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.50um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.32 mm ID. 15-Meter Length. 1.50um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.25 mm ID. 105-Meter Length. 1.0um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.53 mm ID. 60-Meter Length. 1.00um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.32 mm ID. 60-Meter Length. 1.00um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.25 mm ID. 60-Meter Length. 1.0um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.53 mm ID. 30-Meter Length. 1.00um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.00um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.25 mm ID. 30-Meter Length. 1.0um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.53 mm ID. 15-Meter Length. 1.00um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.53 mm ID. 30-Meter Length. 0.50um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.50um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.25 mm ID. 30-Meter Length. 0.50um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.25 mm ID. 60-Meter Length. 0.25um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.53 mm ID. 30-Meter Length. 0.25um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.25um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.25 mm ID. 30-Meter Length. 0.25um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.32 mm ID. 15-Meter Length. 0.25um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.25 mm ID. 15-Meter Length. 0.25um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.10um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -1301(Fused Silica). 0.25 mm ID. 30-Meter Length. 0.1um. Unique polarity ideal for a wide variety of applications. Equivalent to USP G43 stationary phase used for solvent impurity analysis in pharmaceutical products.

Rtx -200(Fused Silica). 0.53 mm ID. 105-Meter Length. 3.00um.

Rtx -200(Fused Silica). 0.53 mm ID. 60-Meter Length. 3.00um.

Rtx-200 GC Column. High-polarity column for analyzing ketones, aldehydes, nitrogen/chlorine compounds, CFCs, compounds with lone pair electrons, and more. Composition: crossbonded trifluoropropylmethylpolysiloxane. Temperature Range: -20 to 270[degree]C. ID: 0.53mm. Length: 30m. Thickness: 3.00um.

Rtx -200(Fused Silica). 0.53 mm ID. 15-Meter Length. 3.00um.

Rtx -200(Fused Silica). 0.32 mm ID. 105-Meter Length. 1.50um.

Rtx -200(Fused Silica). 0.53 mm ID. 60-Meter Length. 1.50um.

Rtx-200 GC Column. High-polarity column for analyzing ketones, aldehydes, nitrogen/chlorine compounds, CFCs, compounds with lone pair electrons, and more. Composition: crossbonded trifluoropropylmethylpolysiloxane. Temperature Range: -20 to 290[degree]C. ID: 0.32mm. Length: 60m. Thickness: 1.50um.

Rtx -200(Fused Silica). 0.53 mm ID. 30-Meter Length. 1.50um.

Rtx -200(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.50um.

Rtx -200(Fused Silica). 0.32 mm ID. 105-Meter Length. 1.00um.

Rtx-200 GC Column. High-polarity column for analyzing ketones, aldehydes, nitrogen/chlorine compounds, CFCs, compounds with lone pair electrons, and more. Composition: crossbonded trifluoropropylmethylpolysiloxane. Temperature Range: -20 to 310[degree]C. ID: 0.25mm. Length: 105m. Thickness: 1.00um.

Rtx -200(Fused Silica). 0.53 mm ID. 60-Meter Length. 1.00um.

Rtx -200(Fused Silica). 0.32 mm ID. 60-Meter Length. 1.00um.

Rtx-200 GC Column. High-polarity column for analyzing ketones, aldehydes, nitrogen/chlorine compounds, CFCs, compounds with lone pair electrons, and more. Composition: crossbonded trifluoropropylmethylpolysiloxane. Temperature Range: -20 to 310[degree]C. ID: 0.25mm. Length: 60m. Thickness: 1.00um.

Rtx -200(Fused Silica). 0.53 mm ID. 30-Meter Length. 1.00um.

Rtx -200(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.00um.

Rtx -200(Fused Silica). 0.25 mm ID. 30-Meter Length. 1.0um.

Rtx -200(Fused Silica). 0.53 mm ID. 15-Meter Length. 1.00um.

Rtx -200(Fused Silica). 0.32 mm ID. 15-Meter Length. 1.00um.

Rtx -200(Fused Silica). 0.25 mm ID. 15-Meter Length. 1.0um.

Rtx -200(Fused Silica). 0.25 mm ID. 105-Meter Length. 0.50um.

Rtx -200(Fused Silica). 0.53 mm ID. 60-Meter Length. 0.50um.

Rtx -200(Fused Silica). 0.32 mm ID. 60-Meter Length. 0.50um.

Rtx -200(Fused Silica). 0.25 mm ID. 60-Meter Length. 0.50um.

Rtx-200 GC Column. High-polarity column for analyzing ketones, aldehydes, nitrogen/chlorine compounds, CFCs, compounds with lone pair electrons, and more. Composition: crossbonded trifluoropropylmethylpolysiloxane. Temperature Range: -20 to 320[degree]C. ID: 0.53mm. Length: 32m. Thickness: 0.50um.

Rtx-200 GC Column. High-polarity column for analyzing ketones, aldehydes, nitrogen/chlorine compounds, CFCs, compounds with lone pair electrons, and more. Composition: crossbonded trifluoropropylmethylpolysiloxane. Temperature Range: -20 to 320[degree]C. ID: 0.32mm. Length: 30m. Thickness: 0.50um.

Rtx -200(Fused Silica). 0.25 mm ID. 30-Meter Length. 0.50um.

Rtx -200(Fused Silica). 0.32 mm ID. 15-Meter Length. 0.50um.

Rtx -200(Fused Silica). 0.25 mm ID. 15-Meter Length. 0.50um.

Rtx -200(Fused Silica). 0.25 mm ID. 105-Meter Length. 0.25um.

Rtx -200(Fused Silica). 0.32 mm ID. 60-Meter Length. 0.25um.

Rtx -200(Fused Silica). 0.25 mm ID. 60-Meter Length. 0.25um.

Rtx -200(Fused Silica). 0.53 mm ID. 30-Meter Length. 0.25um.

Rtx -200(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.25um.

Rtx -200(Fused Silica). 0.25 mm ID. 30-Meter Length. 0.25um.

Rtx -200(Fused Silica). 0.53 mm ID. 15-Meter Length. 0.25um.

Rtx -200(Fused Silica). 0.32 mm ID. 15-Meter Length. 0.25um.

Rtx -200(Fused Silica). 0.25 mm ID. 15-Meter Length. 0.25um.

Rtx -200(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.10um.

Rtx -225(Fused Silica). 0.32 mm ID. 60-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 1.00um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 1.00um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 1.00um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.53 mm ID. 15-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 1.00um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.32 mm ID. 15-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 1.00um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 0.50um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 0.50um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 0.50um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.25 mm ID. 60-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 0.25um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 0.25um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 0.25um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 0.25um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.32 mm ID. 15-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 0.25um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rtx -225(Fused Silica). 0.25 mm ID. 15-Meter Length. The maximum temperatures listed are for 15- and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperatures. 0.25um. Ideal for the analysis of FAMEs, sugar derivatives, and flavour compounds.

Rt-betaDEXM (Fused Silica). 0.32mm ID. 30-Meter Length. 0.25um.

Rt-betaDEXM (Fused Silica). 0.25mm ID. 30-Meter Length. 0.25um.

COLUMN RT2340 60M .25MM .20UM - 13056

Rtx -5MS(Fused Silica). 0.53mm ID. 30-Meter Length. 1.50um.

Rtx -5MS(Fused Silica). 0.53mm ID. 30-Meter Length. 1.00um.

Rtx -5MS(Fused Silica). 0.32mm ID. 30-Meter Length. 1.00um.

Rtx®-1 GC Columns, Restek - 12654-125, Rtx-1

Rtx -5MS(Fused Silica). 0.25mm ID. 30-Meter Length. 1.00um.

Rtx -5MS(Fused Silica). 0.32mm ID. 15-Meter Length. 1.00um.

Rtx -5MS(Fused Silica). 0.25mm ID. 15-Meter Length. 1.00um.

Rtx -5MS(Fused Silica). 0.53mm ID. 30-Meter Length. 0.50um.

Rtx-5MS GC Column. Low bleed, highly inert column developed for mass spectrometers and the analysis of semi-volatile pollutants. Phase composition: crossbonded 5% phenyl, 95% dimethylpolysiloxane. Temperature range: -60 to 330[degree]C. ID: 0.32mm. Length: 30m. Film Thickness: 0.50um.

Rtx-5MS GC Column. Low bleed, highly inert column developed for mass spectrometers and the analysis of semi-volatile pollutants. Phase composition: crossbonded 5% phenyl, 95% dimethylpolysiloxane. Temperature range: -60 to 330[degree]C. ID: 0.25mm. Length: 30m. Film Thickness: 0.50um.

Rtx®-1 GC Columns, Restek - 12638-127, Rtx-1

Rtx -5MS(Fused Silica). 0.32mm ID. 60-Meter Length. 0.25um.

Rtx -5MS(Fused Silica). 0.32mm ID. 30-Meter Length. 0.25um.

Rtx-5MS GC Column. Low bleed, highly inert column developed for mass spectrometers and the analysis of semi-volatile pollutants. Phase composition: crossbonded 5% phenyl, 95% dimethylpolysiloxane. Temperature range: -60 to 330[degree]C. ID: 0.25mm. Length: 30m. Film Thickness: 0.25um.

Rtx®-1 GC Columns, Restek - 12623-124, Rtx-1

Rtx -5MS(Fused Silica). 0.32mm ID. 15-Meter Length. 0.25um.

Rtx -5MS(Fused Silica). 0.25mm ID. 15-Meter Length. 0.25um.

Rtx -5MS(Fused Silica). 0.32mm ID. 60-Meter Length. 0.10um.

Rtx -5MS(Fused Silica). 0.25mm ID. 60-Meter Length. 0.10um.

Rtx -5MS(Fused Silica). 0.32mm ID. 30-Meter Length. 0.10um.

Rtx -5MS(Fused Silica). 0.25mm ID. 15-Meter Length. 0.10um.

Rtx-5 Amine (Fused Silica). 0.53 mm ID. 30-Meter Length. 3.00um. Excellent for the analysis of mono-, di-, and triamines, ethanolamine, and other alkanolamines. Eliminates the need to derivatize basic compounds. Column priming not required, even at ppm levels.

Rtx-5 Amine (Fused Silica). 0.53mm ID. 15-Meter Length. 3.00um. Excellent for the analysis of mono-, di-, and triamines, ethanolamine, and other alkanolamines. Eliminates the need to derivatize basic compounds. Column priming not required, even at ppm levels.

Rtx-5 Amine (Fused Silica). 0.32mm ID. 15-Meter Length. 1.50um. Excellent for the analysis of mono-, di-, and triamines, ethanolamine, and other alkanolamines. Eliminates the need to derivatize basic compounds. Column priming not required, even at ppm levels.

Rtx-5 Amine (Fused Silica). 0.53mm ID. 30-Meter Length. 1.00um. Excellent for the analysis of mono-, di-, and triamines, ethanolamine, and other alkanolamines. Eliminates the need to derivatize basic compounds. Column priming not required, even at ppm levels.

Rtx-5 Amine (Fused Silica). 0.32mm ID. 30-Meter Length. 1.00um. Excellent for the analysis of mono-, di-, and triamines, ethanolamine, and other alkanolamines. Eliminates the need to derivatize basic compounds. Column priming not required, even at ppm levels.

Rtx-5 Amine (Fused Silica). 0.25mm ID. 30-Meter Length. 1.00um. Excellent for the analysis of mono-, di-, and triamines, ethanolamine, and other alkanolamines. Eliminates the need to derivatize basic compounds. Column priming not required, even at ppm levels.

Rtx-5 Amine (Fused Silica). 0.53mm ID. 15-Meter Length. 1.00um. Excellent for the analysis of mono-, di-, and triamines, ethanolamine, and other alkanolamines. Eliminates the need to derivatize basic compounds. Column priming not required, even at ppm levels.

Rtx®-5 Amine Columns, Restek - 12351, Rtx-5 Amine Column

Rtx-5 Amine (Fused Silica). 0.25mm ID. 15-Meter Length. 1.00um. Excellent for the analysis of mono-, di-, and triamines, ethanolamine, and other alkanolamines. Eliminates the need to derivatize basic compounds. Column priming not required, even at ppm levels.

Rtx-5 Amine Phase Column. Low polarity, base deactivated column for the analysis of basic, neutral, adsorptive and mildly acidic compounds. Phase composition: crossbonded 5% phenyl, 95% dimethylpolysiloxane. Temperature range: -60 to 315[degree]C. I.D.: 0.25mm. Length. 30m. Film Thickness: 0.50um.

Rtx -1701(Fused Silica). 0.53 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 3.00um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 3.00um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.53 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 3.00um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.53 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.32 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.32 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.25 mm ID. 105-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.0um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.53 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.32 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx-1701 GC Column. Low-mid polarity column for pesticides, PCBs, solvents, drugs. Not for strongly acidic compounds. Phase composition: crossbonded 14% cyanopropylphenyl, 86% dimethylpolysiloxane. Range: -60 to 260[degree]C. ID: 0.25mm. Length: 60m. Thickness: 1.00um. For EPA method 608.

Rtx-1701 GC Column. Low-mid polarity column for pesticides, PCBs, solvents, drugs. Not for strongly acidic compounds. Phase composition: crossbonded 14% cyanopropylphenyl, 86% dimethylpolysiloxane. Range: -60 to 260[degree]C. ID: 0.53mm. Length: 30m. Thickness: 1.00um. For EPA method 608.

Rtx-1701 GC Column. Low-mid polarity column for pesticides, PCBs, solvents, drugs. Not for strongly acidic compounds. Phase composition: crossbonded 14% cyanopropylphenyl, 86% dimethylpolysiloxane. Range: -60 to 260[degree]C. ID: 0.32mm. Length: 30m. Thickness: 1.00um. For EPA method 608.

Rtx -1701(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.0um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.53 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.32 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.25 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.0um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.32 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.25 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx-1701 GC Column. Low-mid polarity column for pesticides, PCBs, solvents, drugs. Not for strongly acidic compounds. Phase composition: crossbonded 14% cyanopropylphenyl, 86% dimethylpolysiloxane. Range: -60 to 270[degree]C. ID: 0.53mm. Length: 30m. Thickness: 0.50um. For EPA method 608.

Rtx -1701(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.53 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.25 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.32 mm ID. 105-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.32 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.25 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx-1701 GC Column. Low-mid polarity column for pesticides, PCBs, solvents, drugs. Not for strongly acidic compounds. Phase composition: crossbonded 14% cyanopropylphenyl, 86% dimethylpolysiloxane. Range: -60 to 320[degree]C. ID: 0.53mm. Length: 30m. Thickness: 0.25um. For EPA method 608.

Rtx-1701 GC Column. Low-mid polarity column for pesticides, PCBs, solvents, drugs. Not for strongly acidic compounds. Phase composition: crossbonded 14% cyanopropylphenyl, 86% dimethylpolysiloxane. Range: -60 to 320[degree]C. ID: 0.32mm. Length: 30m. Thickness: 0.25um. For EPA method 608.

Rtx-1701 GC Column. Low-mid polarity column for pesticides, PCBs, solvents, drugs. Not for strongly acidic compounds. Phase composition: crossbonded 14% cyanopropylphenyl, 86% dimethylpolysiloxane. Range: -60 to 320[degree]C. ID: 0.25mm. Length: 30m. Thickness: 0.25um. For EPA method 608.

Rtx -1701(Fused Silica). 0.32 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.25 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.25 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.1um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -20(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.10um. Increased phenyl content offers unique polarity to give balance between low and mid polarity.

Rtx -1701(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.10um. Ideal for the analysis of pesticides, solvents, and drugs.

Rtx -1701(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.1um. Ideal for the analysis of pesticides, solvents, and drugs.

Stx®-CLPesticides2 Columns (fused silica with Siltek® deactivation), Restek - 11444, Stx-CLPesticides2 Column

Rtx®-CLPesticides and Rtx-CLPesticides2 GC Columns, Restek - 11340

Rtx®-CLPesticides and Rtx-CLPesticides2 GC Columns, Restek - 11324

Rtx®-OPPesticides Columns (Fused Silica), Restek - 11239, Rtx-OPPesticides

Stx®-CLPesticides Column Kit (0.25 mm Int.Ø), Restek - 11190, Stx-CLPesticides Kit (0.25 mm ID)

Rtx®-CLPesticides and Rtx-CLPesticides2 GC Columns, Restek - 11140

Rtx®-CLPesticides and Rtx-CLPesticides2 GC Columns, Restek - 11139

Stabilwax-DA (Fused Silica). 0.53 mm ID. 60-Meter Length. 1.50um. Ideal for the analysis of free acids(no bleed for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 30-Meter Length. 1.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 15-Meter Length. 1.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 60-Meter Length. 1.00um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.32 mm ID. 60-Meter Length. 1.00um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

STABILWAX-DA Phase Column. Polar, acid deactivated column for the analysis of underivitized free fatty acids from C1 to C20. Phase composition: crossbonded Carbowax (100% Polyethylene Glycol). Temperature range: 40 to 240[degree]C. I.D.: 0.53mm. Length: 30m. Film Thickness:1.00um.

STABILWAX-DA Phase Column. Polar, acid deactivated column for the analysis of underivitized free fatty acids from C1 to C20. Phase composition: crossbonded Carbowax (100% Polyethylene Glycol). Temperature range: 40 to 240[degree]C. I.D.: 0.32mm. Length: 30m. Film Thickness: 1.00um.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 15-Meter Length. 1.00um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.32 mm ID. 15-Meter Length. 1.00um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 60-Meter Length. 0.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.32 mm ID. 60-Meter Length. 0.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.25 mm ID. 60-Meter Length. 0.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 30-Meter Length. 0.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.32 mm ID. 30-Meter Length. 0.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.25 mm ID. 30-Meter Length. 0.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 15-Meter Length. 0.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.32 mm ID. 15-Meter Length. 0.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.25 mm ID. 15-Meter Length. 0.50um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 60-Meter Length. 0.25um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.32 mm ID. 60-Meter Length. 0.25um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.25 mm ID. 60-Meter Length. 0.25um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 30-Meter Length. 0.25um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

STABILWAX-DA Phase Column. Polar, acid deactivated column for the analysis of underivitized free fatty acids from C1 to C20. Phase composition: crossbonded Carbowax (100% Polyethylene Glycol). Temperature range: 40 to 250[degree]C. I.D.: 0.32mm. Length: 30m. Film Thickness: 0.25um.

Stabilwax-DA (Fused Silica). 0.25 mm ID. 30-Meter Length. 0.25um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 15-Meter Length. 0.25um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.32 mm ID. 15-Meter Length. 0.25um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.25 mm ID. 15-Meter Length. 0.25um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.32 mm ID. 30-Meter Length. 0.10um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.25 mm ID. 30-Meter Length. 0.10um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.53 mm ID. 15-Meter Length. 0.10um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Stabilwax-DA (Fused Silica). 0.25 mm ID. 15-Meter Length. 0.10um. Ideal for the analysis of free acids(no need for derivatization). High thermal stability(250[degree]C)and long column lifetime. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability.

Rtx -624(Fused Silica). 0.53 mm ID. 105-Meter Length. 3.00um. 105-meter column meets new CLP SOW requirements for gas separation without sub-ambient cooling. recommended for the analysis of volatile organic compounds in EPA methods.

Rtx-624 GC Column. For analysis of organic compounds using a GC/MS system. Phase composition: crossbonded 6% cyanopropylphenyl, 94% dimethylpolysiloxane. Range: -20 to 240[degree]C. ID: 0.53mm. Length: 75m. Film Thckness: 3.00um. For EPA methods 502.2, 524.2, 601, 602, 624, 8010, 8020, 8240, 8260.

Rtx-624 GC Column. For analysis of organic compounds using a GC/MS system. Phase composition: crossbonded 6% cyanopropylphenyl, 94% dimethylpolysiloxane. Range: -20 to 240[degree]C. ID: 0.53mm. Length: 60m. Film Thckness: 3.00um. For EPA methods 502.2, 524.2, 601, 602, 624, 8010, 8020, 8240, 8260.

Rtx-624 GC Column. For analysis of organic compounds using a GC/MS system. Phase composition: crossbonded 6% cyanopropylphenyl, 94% dimethylpolysiloxane. Range: -20 to 240[degree]C. ID: 0.32mm. Length: 60m. Film Thckness: 1.80um. For EPA methods 502.2, 524.2, 601, 602, 624, 8010, 8020, 8240, 8260.

Rtx-624 GC Column. For analysis of organic compounds using a GC/MS system. Phase composition: crossbonded 6% cyanopropylphenyl, 94% dimethylpolysiloxane. Range: -20 to 240[degree]C. ID: 0.53mm. Length: 30m. Film Thckness: 3.00um. For EPA methods 502.2, 524.2, 601, 602, 624, 8010, 8020, 8240, 8260.

Rtx -624(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.80um. 105-meter column meets new CLP SOW requirements for gas separation without sub-ambient cooling. recommended for the analysis of volatile organic compounds in EPA methods.

Rtx -624(Fused Silica). 0.25 mm ID. 60-Meter Length. 1.40um. 105-meter column meets new CLP SOW requirements for gas separation without sub-ambient cooling. recommended for the analysis of volatile organic compounds in EPA methods.

Rtx -624(Fused Silica). 0.25 mm ID. 30-Meter Length. 1.40um. 105-meter column meets new CLP SOW requirements for gas separation without sub-ambient cooling. recommended for the analysis of volatile organic compounds in EPA methods.

Rtx -502.2(Fused Silica). 0.32 mm ID. 105-Meter Length. 1.80um. recommended for the analysis of volatile organic compounds in EPA methods. Sub-ambient temperature not required with 105-meter column. Specified in many GRO methods for monitoring leaking underground storage tasks.

Rtx -502.2(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.80um. recommended for the analysis of volatile organic compounds in EPA methods. Sub-ambient temperature not required with 105-meter column. Specified in many GRO methods for monitoring leaking underground storage tasks.

Rtx-502.2 GC Column. For volatile organic compounds, light hydrocarbons and aromatics. Composition: crossbonded diphenyldimethylpolysiloxane. Range: -20 to 270[degree]C. ID: 0.25mm. Length: 60m. Thickness: 1.40um. For EPA methods 502.2, 524.2, 601, 602, 624, 8010, 8020, 8240, 8260, and GRO methods.

Rtx -502.2(Fused Silica). 0.25 mm ID. 30-Meter Length. 1.40um. recommended for the analysis of volatile organic compounds in EPA methods. Sub-ambient temperature not required with 105-meter column. Specified in many GRO methods for monitoring leaking underground storage tasks.

Rtx-502.2 GC Column. For volatile organic compounds, light hydrocarbons, and aromatics. Composition: crossbonded diphenyldimethylpolysiloxane. Range: 0 to 270[degree]C. ID: 0.53mm. Length: 105m. Thickness: 3.00um. For EPA methods 502.2, 524.2, 601, 602, 624, 8010, 8020, 8240, 8260, and GRO methods.

Rtx-502.2 GC Column. For volatile organic compounds, light hydrocarbons, and aromatics. Composition: crossbonded diphenyldimethylpolysiloxane. Range: 0 to 270[degree]C. ID: 0.53mm. Length: 60m. Thickness: 3.00um. For EPA methods 502.2, 524.2, 601, 602, 624, 8010, 8020, 8240, 8260, and GRO methods.

Rtx-502.2 GC Column. For volatile organic compounds, light hydrocarbons, and aromatics. Composition: crossbonded diphenyldimethylpolysiloxane. Range: 0 to 270[degree]C. ID: 0.53mm. Length: 30m. Thickness: 3.00um. For EPA methods 502.2, 524.2, 601, 602, 624, 8010, 8020, 8240, 8260, and GRO methods.

Rtx -Volatiles(Fused Silica). 0.53 mm ID. 60-Meter Length. 2.00u. Used for the analysis of volatile organic compounds(VOCs) in EPA methods. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. 280[degree] thermal stability similar to VOCOL columns.

Rtx -Volatiles(Fused Silica). 0.32 mm ID. 60-Meter Length. 1.50u. Used for the analysis of volatile organic compounds(VOCs) in EPA methods. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. 280[degree] thermal stability similar to VOCOL columns.

Rtx -Volatiles(Fused Silica). 0.25 mm ID. 60-Meter Length. 1.00u. Used for the analysis of volatile organic compounds(VOCs) in EPA methods. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. 280[degree] thermal stability similar to VOCOL columns.

Rtx -Volatiles(Fused Silica). 0.53 mm ID. 30-Meter Length. 2.00u. Used for the analysis of volatile organic compounds(VOCs) in EPA methods. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. 280[degree] thermal stability similar to VOCOL columns.

Rtx -Volatiles(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.50u. Used for the analysis of volatile organic compounds(VOCs) in EPA methods. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. 280[degree] thermal stability similar to VOCOL columns.

Rtx -Volatiles(Fused Silica). 0.25 mm ID. 30-Meter Length. 1.00u. Used for the analysis of volatile organic compounds(VOCs) in EPA methods. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. 280[degree] thermal stability.

Stabilwax -DB(Fused Silica). 0.53 mm ID. 30-Meter Length. 1.50um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

Stabilwax -DB(Fused Silica). 0.53 mm ID. 60-Meter Length. 1.00um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

Stabilwax -DB(Fused Silica). 0.32 mm ID. 60-Meter Length. 1.00um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

Stabilwax -DB(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.00um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

Stabilwax -DB(Fused Silica). 0.53 mm ID. 15-Meter Length. 0.50um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

Stabilwax -DB(Fused Silica). 0.53 mm ID. 30-Meter Length. 0.50um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

Stabilwax -DB(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.50um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

Stabilwax -DB(Fused Silica). 0.25 mm ID. 30-Meter Length. 0.50um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

Stabilwax -DB(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.25um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

STABILWAX-DB GC Column. Polar column for the analysis of underivatized amines and basic compounds. Reduced adsorption and improved response. Phase composition: crossbonded Carbowax (100% Polyethylene Glycol). Temperature range: 40 to 220[degree]C. ID: 0.25mm. Length: 30m. Thickness: 0.25um.

Stabilwax -DB(Fused Silica). 0.32 mm ID. 15-Meter Length. 0.25um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

Stabilwax -DB(Fused Silica). 0.25 mm ID. 15-Meter Length. 0.25um. Excellent for the analysis of basic compounds. Eliminates the need for derivatization. Crossbond technology results in reduced bleed, increased column lifetime, and solvent rinsability. No column priming required.

Rtx -2330 (Fused Silica). 0.32 mm ID. 1050-Meter Length. 0.20um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -2330 (Fused Silica). 0.25 mm ID. 105-Meter Length. 0.20um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -2330 (Fused Silica). 0.32 mm ID. 60-Meter Length. 0.20um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -2330 (Fused Silica). 0.25 mm ID. 60-Meter Length. 0.20um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -2330 (Fused Silica). 0.53 mm ID. 30-Meter Length. 0.20um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -2330 (Fused Silica). 0.32 mm ID. 30-Meter Length. 0.20um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -2330 (Fused Silica). 0.25 mm ID. 30-Meter Length. 0.20um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -2330 (Fused Silica). 0.32 mm ID. 15-Meter Length. 0.20um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -2330 (Fused Silica). 0.25 mm ID. 105-Meter Length. 0.10um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -2330 (Fused Silica). 0.25 mm ID. 60-Meter Length. 0.10um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -2330 (Fused Silica). 0.25 mm ID. 30-Meter Length. 0.10um. Ideal for cis/trans fatty acid methyl ester separations. Primary column for the analysis of tetrachlorodibenzo-p-dioxin (TCDD) and polychlorodibenzofuran(PCDF) isomers.

Rtx -50(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.50um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.83um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.53 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.50um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.53 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.32 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.25 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.0um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.0um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.53 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.32 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.53 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.32 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.32 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.25 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.25 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal confirmation column for many EPA Methods.

Rtx -50(Fused Silica). 0.53 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal confirmation column for many EPA Methods.

Rtx -35(Fused Silica). 0.32 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 3.00um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 3.00um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 3.00um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.53 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.50um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.50um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.53 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx-35 GC Column. Mid-polarity column for analyzing pesticides, PCBs, amines, nitrogen containing herbicides. Phase composition: crossbonded 35% diphenyl, 65% dimethylpolysiloxane. Recommended for EPA method 608. Temperature Range: 0 to 285[degree]C. ID: 0.53mm. Length: 30m. Thickness: 1.00um.

Rtx -35(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.00um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 1.0um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.25 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx-35 GC Column. Mid-polarity column for analyzing pesticides, PCBs, amines, nitrogen containing herbicides. Phase composition: crossbonded 35% diphenyl, 65% dimethylpolysiloxane. Recommended for EPA method 608. Temperature Range: 0 to 290[degree]C. ID: 0.53m. Length: 30m. Thickness: 0.50um.

Rtx -35(Fused Silica). 0.32 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.53 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.25 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.50um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.32 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.25 mm ID. 60-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx-35 GC Column. Mid-polarity column for analyzing pesticides, PCBs, amines, nitrogen containing herbicides. Phase composition: crossbonded 35% diphenyl, 65% dimethylpolysiloxane. Recommended for EPA method 608. Temperature Range: 0 to 300[degree]C. ID: 0.32mm. Length: 30m. Thickness: 0.25um.

Rtx -35(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.32 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.25 mm ID. 15-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.25um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -35(Fused Silica). 0.25 mm ID. 30-Meter Length. The maximum temperatures listed are for 15-and 30- meter lengths. Longer lengths may have a slightly reduced maximum temperature. 0.1um. Ideal confirmational column for pesticide and herbicide analysis. 300[degree]C thermal stability.

Rtx -20(Fused Silica). 0.32 mm ID. 60-Meter Length. 3.00um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.53 mm ID. 30-Meter Length. 3.00um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.32 mm ID. 30-Meter Length. 3.00um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.53 mm ID. 30-Meter Length. 1.50um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.50um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.32 mm ID. 60-Meter Length. 1.00um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.53 mm ID. 30-Meter Length. 1.00um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.32 mm ID. 30-Meter Length. 1.00um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.25 mm ID. 30-Meter Length. 1.0um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.53 mm ID. 15-Meter Length. 1.00um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.53 mm ID. 30-Meter Length. 0.50um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.50um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.25 mm ID. 30-Meter Length. 0.50um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.32 mm ID. 30-Meter Length. 0.25um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx -20(Fused Silica). 0.25 mm ID. 30-Meter Length. 0.25um. Increased phenyl content offers unique polarity to give balance between low and mid polarity. Similar to SPB -20 and VOCOL columns.

Rtx-5 (Fused Silica). 0.32mm ID. 105-Meter Length. 3.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.53mm ID. 60-Meter Length. 3.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.32mm ID. 60-Meter Length. 3.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 270[degree]C. ID: 0.53mm. Length: 30m. Thickness: 3.00um.

Rtx-5 (Fused Silica). 0.32mm ID. 30-Meter Length. 3.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.53mm ID. 60-Meter Length. 5.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.53mm ID. 15-Meter Length. 3.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.32mm ID. 15-Meter Length. 3.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 270[degree]C. ID: 0.53mm. Length: 30m. Thickness: 5.00um.

Rtx-5 (Fused Silica). 0.32mm ID. 105-Meter Length. 1.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.53mm ID. 60-Meter Length. 1.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.32mm ID. 60-Meter Length. 1.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 310[degree]C. ID: 0.53mm. Length: 30m. Thickness: 1.50um.

Rtx-5 (Fused Silica). 0.32mm ID. 30-Meter Length. 1.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 310[degree]C. ID: 0.53mm. Length: 15m. Thickness: 1.50um.

Rtx-5 (Fused Silica). 0.32mm ID. 15-Meter Length. 1.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.32mm ID. 105-Meter Length. 1.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.53mm ID. 60-Meter Length. 1.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.32mm ID. 60-Meter Length. 1.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 320[degree]C. ID: 0.25mm. Length: 60m. Thickness: 1.00um.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 310[degree]C. ID: 0.53mm. Length: 30m. Thickness: 1.00um.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 330[degree]C. ID: 0.32mm. Length: 30m. Thickness: 1.00um.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 320[degree]C. ID: 0.25mm. Length: 30m. Thickness: 1.00um.

COLUMN RTX-5 CAPILLARY 30M - 10253-127

Rtx®-1 GC Columns, Restek - 10253-124, Rtx-1

Rtx-5 (Fused Silica). 0.53mm ID. 15-Meter Length. 1.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.32mm ID. 15-Meter Length. 1.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.25mm ID. 15-Meter Length. 1.00um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.53mm ID. 60-Meter Length. 0.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.32mm ID. 60-Meter Length. 0.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.25mm ID. 60-Meter Length. 0.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 310[degree]C. ID: 0.53mm. Length: 30m. Thickness: 0.50um.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 330[degree]C. ID: 0.32mm. Length: 30m. Thickness: 0.50um.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 330[degree]C. ID: 0.25mm. Length: 30m. Thickness: 0.50um.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 310[degree]C. ID: 0.53mm. Length: 15m. Thickness: 0.50um.

Rtx-5 (Fused Silica). 0.32mm ID. 15-Meter Length. 0.50um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 330[degree]C. ID: 0.25mm. Length: 15m. Thickness: 0.50um.

Rtx-5 (Fused Silica). 0.25mm ID. 105-Meter Length. 0.25um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.53mm ID. 60-Meter Length. 0.25um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 330[degree]C. ID: 0.32mm. Length: 60m. Thickness: 0.25um.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 330[degree]C. ID: 0.25mm. Length: 60m. Thickness: 0.25um.

Rtx-5 (Fused Silica). 0.53mm ID. 30-Meter Length. 0.25um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 330[degree]C. ID: 0.32mm. Length: 30m. Thickness: 0.25um.

Rtx-5 (Fused Silica). 0.25mm ID. 30-Meter Length. 0.25um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.53mm ID. 15-Meter Length. 0.25um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.32mm ID. 15-Meter Length. 0.25um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 330[degree]C. ID: 0.25mm. Length: 15m. Thickness: 0.25um.

Rtx-5 (Fused Silica). 0.25mm ID. 60-Meter Length. 0.10um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.53mm ID. 30-Meter Length. 0.10um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.32mm ID. 30-Meter Length. 0.10um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 GC Column. Low-polarity column for analyzing pesticides, PCBs, aromatic hydrocarbons, drugs, and essential oils. Composition: Crossbond 5% diphenyl, 95% dimethylpolysiloxane. Temperature Range -60 to 330[degree]C. ID: 0.25mm. Length: 30m. Thickness: 0.10um.

Rtx-5 (Fused Silica). 0.53mm ID. 15-Meter Length. 0.10um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.32mm ID. 15-Meter Length. 0.10um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-5 (Fused Silica). 0.25mm ID. 15-Meter Length. 0.10um. Excellent general purpose stationary phase. Crossband technology results in longer lifetimes and low bleed, and allows solvent rejuvenation. Available in unbreakable stainless steel tubing.

Rtx-2887 (Fused Silica). 0.53mm ID. 10-Meter Length. 2.65um. Exceed all performance requirements for ASTM Test Method D-2887. Crossband technology results in longer lifetimes and shorter conditioning, and allows solvent rinsing.

Rtx -1 (Fused Silica). 0.32mm ID. 30Meters Length. 4.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1PONA (Fused Silica). 0.25mm ID. 100-Meter Length. Optmized phase for hydrocarbon analysis. 0.50um. Exceeds ASTM and CGSB requirements for detailed hydrocarbon analysis. Column testing tailored to ensure column-to-column reproducibility for PONA analysis.

Rtx -1 (Fused Silica). 0.53mm ID. 105-Meter Length. 5.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 60Meters Length. 7.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 30Meters Length. 7.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 105-Meter Length. 3.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 270[degree]C. I.D.: 0.53mm. Length: 105m. Film Thickness: 3.00um.

Rtx -1 (Fused Silica). 0.53mm ID. 60Meters Length. 3.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 60Meters Length. 3.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 285[degree]C. I.D.: 0.53mm. Length: 30m. Film Thickness: 3.00um.

Rtx -1 (Fused Silica). 0.32mm ID. 30Meters Length. 3.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 60Meters Length. 5.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 15-Meter Length. 3.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 15-Meter Length. 3.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 60Meters Length. 5.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 285[degree]C. I.D.: 0.53mm. Length: 30m. Film Thickness: 5.00um.

Rtx®-1 GC Columns, Restek - 10179-126, Rtx-1

Rtx -1 (Fused Silica). 0.32mm ID. 30Meters Length. 5.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 15-Meter Length. 5.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 15-Meter Length. 5.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 105-Meter Length. 1.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 60Meters Length. 1.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 60Meters Length. 1.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 310[degree]C. I.D.: 0.53mm. Length: 30m. Film Thickness: 1.50um.

Rtx -1 (Fused Silica). 0.32mm ID. 30Meters Length. 1.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 310[degree]C. I.D.: 0.53mm. Length: 15m. Film Thickness: 1.50um.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 310[degree]C. I.D.: 0.32mm. Length: 15m. Film Thickness: 1.50um.

Rtx -1 (Fused Silica). 0.32mm ID. 105-Meter Length. 1.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.25mm ID. 105-Meter Length. 1.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 60Meters Length. 1.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 320[degree]C. I.D.: 0.32mm. Length: 60m. Film Thickness: 1.00um.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 320[degree]C. I.D.: 0.25mm. Length: 60m. Film Thickness: 1.00um.

Rtx -1 (Fused Silica). 0.53mm ID. 30Meters Length. 1.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 320[degree]C. I.D.: 0.32mm. Length: 30m. Film Thickness: 1.00um.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 320[degree]C. I.D.: 0.25mm. Length: 30m. Film Thickness: 1.00um.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 320[degree]C. I.D.: 0.53mm. Length: 15m. Film Thickness: 1.00um.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 320[degree]C. I.D.: 0.32mm. Length: 15m. Film Thickness: 1.00um.

Rtx -1 (Fused Silica). 0.25mm ID. 15-Meter Length. 1.00um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.25mm ID. 105-Meter Length. 0.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 60Meters Length. 0.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 60Meters Length. 0.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx®-1 GC Columns, Restek - 10141, Rtx-1

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 330[degree]C. I.D.: 0.53mm. Length: 30m. Film Thickness: 0.50um.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 330[degree]C. I.D.: 0.32mm. Length: 30m. Film Thickness: 0.50um.

Rtx -1 (Fused Silica). 0.25mm ID. 30Meters Length. 0.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 15-Meter Length. 0.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 330[degree]C. I.D.: 0.32mm. Length: 15m. Film Thickness: 0.50um.

Rtx -1 (Fused Silica). 0.25mm ID. 15-Meter Length. 0.50um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 60Meters Length. 0.25um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 60Meters Length. 0.25um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.25mm ID. 60Meters Length. 0.25um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 30Meters Length. 0.25um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 340[degree]C. I.D.: 0.25mm. Length: 30m. Film Thickness: 0.25um.

Rtx-1 GC Column. A nonpolar, fused silica, low-bleed column designed for the analysis of solvents and petrochemicals. Phase composition: crossbonded 100% polydimethylsiloxane. Temperature Range: -60 to 340[degree]C. I.D.: 0.53mm. Length: 15m. Film Thickness: 0.25um.

Rtx -1 (Fused Silica). 0.32mm ID. 15-Meter Length. 0.25um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.25mm ID. 15-Meter Length. 0.25um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 60Meters Length. 0.01um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.25mm ID. 60Meters Length. 0.10um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 30Meters Length. 0.01um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.25mm ID. 30Meters Length. 0.10um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.53mm ID. 15-Meter Length. 0.10um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.32mm ID. 15-Meter Length. 0.01um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HB-1, and ultra-1 phases.

Rtx -1 (Fused Silica). 0.25mm ID. 15-Meter Length. 0.10um. Ideal for the analysis of solvents and petrochemicals. Available in Unbreakable Silcosteel (MXT )tubing. Thermally stable to 360[degree]C (MXT stable to 400[degree]C). Similar to DB-1, SPB-1, HP-1, and Ultra-1 phases.

Intermediate-polarity Deactivated guard Columns. 0.025mm ID. 0.37 +/- 0.04mm OD. 1-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-polarity Deactivated guard Columns. 0.015mm ID. 0.363 +/- 0.012mm OD. 1-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-polarity Deactivated guard Columns. 0.10mm ID. 0.363 +/- 0.012mm OD. 1-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-polarity Deactivated guard Columns. 0.075mm ID. 0.363 +/- 0.012mm OD. 1-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-polarity Deactivated guard Columns. 0.05mm ID. 0.363 +/- 0.012mm OD. 1-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-polarity Deactivated guard Columns. 0.025mm ID. 0.363 +/- 0.012mm OD. 1-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Hydroguard Guard Columns. 0.32mm ID. 0.45 +/- 0.04mm OD. 10-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Hydroguard Guard Columns. 0.53mm ID. 0.69 +/- 0.05mm OD. 5-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Hydroguard® Water-Resistant Guard/Retention Gap Columns/Transfer Lines (fused silica), Restek - 10080-600, Hydroguard Fused Silica Guard Columns & Transfer Lines

Fused Silica Guard Column Polar Polyethylene glycol deactivation. 0.53mm ID. 0.69 +/- 0.05mm OD. 10-Meter Length. 30- and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths. Using full length may cause peak distortion.

Fused Silica Guard Column Polar Polyethylene glycol deactivation. 0.32mm ID. 0.45 +/- 0.04mm OD. 10-Meter Length. 30- and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths. Using full length may cause peak distortion.

Fused Silica Guard Column Polar Polyethylene glycol deactivation. 0.25mm ID. 0.37 +/- 0.04mm OD. 10-Meter Length. 30- and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths. Using full length may cause peak distortion.

Fused Silica Guard Column Polar Polyethylene glycol deactivation. 0.53mm ID. 0.69 +/- 0.05mm OD. 5-Meter Length. 30- and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths. Using full length may cause peak distortion.

Fused Silica Guard Column Polar Polyethylene glycol deactivation. 0.32mm ID. 0.45 +/- 0.04mm OD. 5-Meter Length. 30- and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths. Using full length may cause peak distortion.

Fused Silica Guard Column Polar Polyethylene glycol deactivation. 0.25mm ID. 0.37 +/- 0.04mm OD. 5-Meter Length. 30- and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths. Using full length may cause peak distortion.

Undeactivated, Untreated Fused Silica Tubing. 0.53mm ID. 0.69+/-0.05mm OD. 60-Meter Length. Strength-tested. Inexpensive. Coiled in 7-inch diameters, banded in 5-meter sections, and mounted in a RESTEK cage.

Undeactivated, Untreated Fused Silica Tubing. 0.53mm ID. 0.69+/-0.05mm OD. 30-Meter Length. Strength-tested. Inexpensive. Coiled in 7-inch diameters, banded in 5-meter sections, and mounted in a RESTEK cage.

Undeactivated, Untreated Fused Silica Tubing. 0.53mm ID. 0.69+/-0.05mm OD. 15-Meter Length. Strength-tested. Inexpensive. Coiled in 7-inch diameters, banded in 5-meter sections, and mounted in a RESTEK cage.

Undeactivated, Untreated Fused Silica Tubing. 0.32mm ID. 0.45+/-0.04mm OD. 60-Meter Length. Strength-tested. Inexpensive. Coiled in 7-inch diameters, banded in 5-meter sections, and mounted in a RESTEK cage.

Undeactivated, Untreated Fused Silica Tubing. 0.32mm ID. 0.45+/-0.04mm OD. 30-Meter Length. Strength-tested. Inexpensive. Coiled in 7-inch diameters, banded in 5-meter sections, and mounted in a RESTEK cage.

Undeactivated, Untreated Fused Silica Tubing. 0.32mm ID. 0.45+/-0.04mm OD. 15-Meter Length. Strength-tested. Inexpensive. Coiled in 7-inch diameters, banded in 5-meter sections, and mounted in a RESTEK cage.

Undeactivated, Untreated Fused Silica Tubing. 0.25mm ID. 0.37+/-0.04mm OD. 60-Meter Length. Strength-tested. Inexpensive. Coiled in 7-inch diameters, banded in 5-meter sections, and mounted in a RESTEK cage.

Undeactivated, Untreated Fused Silica Tubing. 0.25mm ID. 0.37+/-0.04mm OD. 30-Meter Length. Strength-tested. Inexpensive. Coiled in 7-inch diameters, banded in 5-meter sections, and mounted in a RESTEK cage.

Undeactivated, Untreated Fused Silica Tubing. 0.25mm ID. 0.37+/-0.04mm OD. 15-Meter Length. Strength-tested. Inexpensive. Coiled in 7-inch diameters, banded in 5-meter sections, and mounted in a RESTEK cage.

Intermediate-polarity Deactivated guard Columns. 0.25mm ID. 0.37 +/- 0.04mm OD. 10-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-Polarity Deactivated Fused Silica Guard Columns. 0.25mm ID. 10-Meter Length.

Intermediate-polarity Deactivated guard Columns. 0.32mm ID. 0.45 +/- 0.04mm OD. 10-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Capillary Guard Column. Fused silica column protects and prolongs the lifetime of an analytical column by trapping non-volatile residues. Phenyl methyl deactivated surface for optimum wettability for both polar and non-polar compounds. Maximum temperature: 340[degree]C. ID: 0.53mm. Length: 10m.

Capillary Guard Column. Fused silica column protects and prolongs the lifetime of an analytical column by trapping non-volatile residues. Phenyl methyl deactivated surface for optimum wettability for both polar and non-polar compounds. Maximum temperature: 340[degree]C. ID: 0.18mm. Length: 5m.

Capillary Guard Column. Fused silica column protects and prolongs the lifetime of an analytical column by trapping non-volatile residues. Phenyl methyl deactivated surface for optimum wettability for both polar and non-polar compounds. Maximum temperature: 340[degree]C. ID: 0.53mm. Length: 5m.

Capillary Guard Column. Fused silica column protects and prolongs the lifetime of an analytical column by trapping non-volatile residues. Phenyl methyl deactivated surface for optimum wettability for both polar and non-polar compounds. Maximum temperature: 340[degree]C. ID: 0.53mm. Length: 5m.

Capillary Guard Column. Fused silica column protects and prolongs the lifetime of an analytical column by trapping non-volatile residues. Phenyl methyl deactivated surface for optimum wettability for both polar and non-polar compounds. Maximum temperature: 340[degree]C. ID: 0.32mm. Length: 5m.

Fused Silica Guard Columns. 0.32 mm ID. 0.49 mm OD.

Fused Silica Guard Columns. 0.25 mm ID. 0.405 mm OD.

Capillary Guard Column. Fused silica column protects and prolongs the lifetime of an analytical column by trapping non-volatile residues. Phenyl methyl deactivated surface for optimum wettability for both polar and non-polar compounds. Maximum temperature: 340[degree]C. ID: 0.15mm. Length: 5m.

Intermediate-polarity Deactivated guard Columns. 0.10mm ID. 0.363 +/- 0.012mm OD. 5-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-polarity Deactivated guard Columns. 0.05mm ID. 0.363 +/- 0.012mm OD. 5-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Siltek®-Deactivated Guard/Retention Gap Columns/Transfer Lines (fused silica), Restek - 10037, Siltek Guard Column

Intermediate-polarity Deactivated guard Columns. 0.53mm ID. 0.69 +/- 0.05mm OD. 60-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-polarity Deactivated guard Columns. 0.53mm ID. 0.69 +/- 0.05mm OD. 30-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Deactivated, Untreated Fused Silica Tubing, Non-polar Dimethyl Deactivated Surface. 0.53mm ID. 0.69+/-0.05mm OD. 60-Meter Length. Useful as guard columns, transfer lines, or long reaction gaps. Inertness-tested with the grob test mix-includes test chromatogram.

Deactivated, Untreated Fused Silica Tubing, Non-polar Dimethyl Deactivated Surface. 0.53mm ID. 0.69+/-0.05mm OD. 30-Meter Length. Useful as guard columns, transfer lines, or long reaction gaps. Inertness-tested with the grob test mix-includes test chromatogram.

Siltek®-Deactivated Guard/Retention Gap Columns/Transfer Lines (fused silica), Restek - 10027, Siltek Guard Column

Intermediate-polarity Deactivated guard Columns. 0.32mm ID. 0.45 +/- 0.04mm OD. 60-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Intermediate-polarity Deactivated guard Columns. 0.32mm ID. 0.45 +/- 0.04mm OD. 30-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Deactivated, Untreated Fused Silica Tubing, Non-polar Dimethyl Deactivated Surface. 0.32mm ID. 0.45+/-0.05mm OD. 60-Meter Length. Useful as guard columns, transfer lines, or long reaction gaps. Inertness-tested with the grob test mix-includes test chromatogram.

Deactivated, Untreated Fused Silica Tubing, Non-polar Dimethyl Deactivated Surface. 0.32mm ID. 0.45+/-0.04mm OD. 30-Meter Length. Useful as guard columns, transfer lines, or long reaction gaps. Inertness-tested with the grob test mix-includes test chromatogram.

Fused Silica Guard Column Polar Polyethylene glycol deactivation. 0.25mm ID. 0.37 +/- 0.04mm OD. 30-Meter Length. 30- and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths. Using full length may cause peak distortion.

Intermediate-polarity Deactivated guard Columns. 0.25mm ID. 0.37 +/- 0.04mm OD. 30-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Deactivated, Untreated Fused Silica Tubing, Non-polar Dimethyl Deactivated Surface. 0.25mm ID. 0.37+/-0.04mm OD. 60-Meter Length. Useful as guard columns, transfer lines, or long reaction gaps. Inertness-tested with the grob test mix-includes test chromatogram.

Deactivated, Untreated Fused Silica Tubing, Non-polar Dimethyl Deactivated Surface. 0.25mm ID. 0.37+/-0.04mm OD. 30-Meter Length. Useful as guard columns, transfer lines, or long reaction gaps. Inertness-tested with the grob test mix-includes test chromatogram.

Deactivated, Untreated Fused Silica Tubing, Non-polar Dimethyl Deactivated Surface. 0.25mm ID. 0.37+/-0.04mm OD. 15-Meter Length. Useful as guard columns, transfer lines, or long reaction gaps. Inertness-tested with the grob test mix-includes test chromatogram.

Base-Deactivated Fused Silica Guard Columns. 0.53mm ID. 0.69 +/- 0.05mm OD. 5-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Base-Deactivated Fused Silica Guard Columns. 0.32mm ID. 0.45 +/- 0.04mm OD. 5-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

Base-Deactivated Fused Silica Guard Columns. 0.25mm ID. 0.37 +/- 0.04mm OD. 5-Meter Length. Not tested with the Grob test mix because of a high pressure drop. 30-and 60-meter lengths are banded in 5-meter sections. Angstroms Recommendation: Cut 60m guard columns into shorter lengths.

NMR Funnel Polypropylene. Polyethylene Disc Polypropylene construction with a lower fitting sized to accommodate 5 mm NMR tubes. Disposable feature eliminates the possibility of cross contamination. Filter is a polyethylene disc or glass wool.

NMR Funnel Polypropylene. Funnel Set (Unassembled) Polypropylene construction with a lower fitting sized to accommodate 5 mm NMR tubes. Disposable feature eliminates the possibility of cross contamination. Filter is a polyethylene disc or glass wool.

Filtration Adapter Assembly GL 45 Thread. Filtration Adapter Assembly This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread.

Purospher® STAR RP-18 Endcapped UHPLC Columns, MilliporeSigma - 1.50649.0001

SeQuant® ZIC®-HILIC HPLC Columns, MilliporeSigma - 1.50490.0001, ZIC®-HILIC guard column kit

SeQuant® ZIC®-HILIC HPLC Columns, MilliporeSigma - 1.50489.0001, ZIC®-HILIC capillary HPLC column

SeQuant® ZIC®-HILIC HPLC Columns, MilliporeSigma - 1.50451.0001, ZIC®-HILIC HPLC column

SeQuant® ZIC®-HILIC HPLC Columns, MilliporeSigma - 1.50447.0001, ZIC®-HILIC HPLC column

SUPREMA ULTRAHIGH 8X300MM10UM - SUA083010LUH

SUPREMA LINEAR M 8X300MM10UM - SUA083010LIM

SUPREMA 10000A 8X300MM 10UM - SUA0830101E4

SUPREMA 1000A 8X300MM 10UM - SUA0830101E3

SUPREMA 8X50MM 10UM GUARD - SUA080510

SDV LINEAR S 8X300MM5UM - SDA083005LIS

MARKES ONLINE SYSTEMS PM KIT - RMK-0003-2S

COLD TRAP GP HYDROPHOBIC SERIES 2XR - MKI-U-T2GPH-2S

CHECK STANDARD BTX IBMA DIOCTYLPHTH PK10 - MKI-C-CHK10

BIOVOC-2 BREATH SAMPLER PK10 - MKI-C-BIO02

GLUE DISPENSING TIPS TAPERED 18GA PK150 - M7300-68001

BALL JOINT ADAPTER INERT SC ON 700 ICP - G8460-20005

4300 HH FTIR MCT RETRO REFLECTOR - G8180-67610

Crosslab Torches for 5100/5110 and 5800/5900 ICP-OES, Agilent Technologies - G8020-68002, Easy-fit fully demountable VDV/SVDV high purity dual view quartz torch, 1.4 mm Int. Ø, with ball joint connection, tapered quartz injector for semivolatile organics. Compatible with 5100; 5110; 5800; 5900

O-RING KIT FOR INERT SC(G8014-68002) PK3 - G8014-68005

SAMPLE CAPILLARY MP CONCENTRIC NEB - G8003-60031

FILAMENT - HES CI RE STRAIT 7250XGC QTOF - G7250-60095

BOTTLE HEAD ASSEMBLY PREP EL - G7161-60042

HIGH-PRESSURE SEAT BIO-COMPATIBLE 012 - G7137-87012

EXTENDED SEAT CAP MP35N 1500UL ID0.9 - G7137-68308

EXTENDED SEAT CAP MP35N 500UL ID0.5 - G7137-68307

HIGH PRESSURE FILTER QUATPUMP - G7131-60004

KIT IDP3 TIP SEAL MAINTENANCE - G7077-67018

NEEDLE ADJUSTMENT TOOL - G5667-40500

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - G4591-60041, Jet, Adapt, stainless steel, WB 0.76 mm int.Ø., packed column

DETECTOR TAIL INTUVO NPD - G4583-60334

DEACTIVATION CAP SHELL WELDMENT - G4352-60570

Crosslab Self-Tightening Column Nuts for GC, Agilent Technologies - G3440-81012, Replacement collar, for self tightening nut

FITTINGS KIT ASX500 AUTOSAMPLER PROBE - G3286-80227

PLATINUM INJECTOR INERT TORCH 25MM ID - G3285-80035

CrossLab Inert Torches and Injectors for ICP-MS, Agilent Technologies - G3285-80034, Injector, semi-demountable, sapphire, 2.5 mm int.Ø., for PFA inert kit, for aqueous samples

ULTIMATE UNION KIT NON-DEACTIVATED - G3182-61581

CANTED COIL SPRING 8.9 MM OD - G2571-67001

TRAY WELL PLATE AUTOSAMPLER - G2258-60111

MAINTENANCE KIT FID REBUILDING - G1531-67001

TUBE-PTFE-ESD-2 0-1 0 - G1315-67304

COLUMN GRAM 8X50MM 10UM GUARD - AMA080510

HYDRIDE MODULE FOR VGA 77 ICP OPERATION - 9910062200

ECLIPSE PLUS C830X150MM5UM - 959993-306

ECLIPSE PLUS C846X30MM35UM - 959936-906

Crosslab ZORBAX, Agilent Technologies - 959743-906

Captiva Disposable Syringe, Agilent Technologies - 9301-6474, Captiva disposable syringe, PP

WRENCH 12 ADJUSTABLE - 8710-1712

300SB-C18 3X150MM 3.5UM - 863974-302

SB-C1846X100MM18UM600BAR - 828975-902

Headspace Screw Top Vials, CrossLab, Agilent Technologies - 8010-0417

CrossLab O-Rings for Spray Chambers, Agilent Technologies - 6910012100, O-ring, nitrile, 1 IN. int.Ø, 1-³/16 IN. ext.Ø, ³/32 IN. thick, for spray chamber bung on Mark 7 atomization system, for aqueous solutions

DISPERSIVE UNIVERSAL KIT 15ML PK50 - 5982-0029

INLINE FILTER KIT BIO INFINITY II - 5720-0020

INLINE FILTER FOR BIO 1290 QUAT PUMP - 5720-0003

CAPILLARY ST 025X800 NXNX - 5500-1461

CAPILLARY ST 094X900 - 5500-1459

CAPILLARY ST 094X550 SX - 5500-1458

CAPILLARY ST 094X500 - 5500-1457

CAPILLARY ST 06X550 SX - 5500-1455

CAPILLARY ST 06X500 - 5500-1454

CAPILLARY ST 05X900 - 5500-1453

CAPILLARY ST 05X550 SX - 5500-1452

CAPILLARY ST 03X900 - 5500-1450

CAPILLARY ST 03X550 SX - 5500-1449

CAPILLARY ST 03X500 LONG SOCKET - 5500-1448

CAPILLARY ST 094X750 SXSI - 5500-1446

CAPILLARY ST 07X750 SXSI - 5500-1443

CAPILLARY ST 05X750 SXSI - 5500-1440

CAPILLARY ST 05X1450 NXNX - 5500-1439

CAPILLARY ST 03X750 SXSI - 5500-1437

CAPILLARY ST 03X1450 NXNX - 5500-1436

CAPILLARY ST 03X1150 SX - 5500-1435

CAPILLARY ST 0.17X800 NXNX - 5500-1431

CAPILLARY ST 017X800 SX - 5500-1430

SOLVENT DISTRIBUTION TUBING KIT - 5500-1429

CAPILLARY ST 06X100 SXSX - 5500-1427

CAPILLARY ST 025X2200 NXNX - 5500-1425

CAPILLARY ST 0.25X1200 NXNX - 5500-1424

CAPILLARY ST 0.25X1100 NXNX - 5500-1422

CAPILLARY MP35N 0.25X130 SISI - 5500-1421

CAPILLARY MP35N 0.25X250 SISI - 5500-1420

CAPILLARY ST 07X1900 SXSI - 5500-1414

CAPILLARY ST 06X1900 SXSI - 5500-1413

CAPILLARY ST 03X1900 SXSI - 5500-1412

ADAPTER PEEK 1/4-28F TO 10-32M ESD - 5500-1410

CAPILLARIES MP35N 0.25X80 SISI - 5500-1283

QUICK CONNECT CAPILLARY PK/ST 017X500MM - 5500-1277

CrossLab Capillaries for HPLC, Agilent Technologies - 5500-1264, Standard capillary, SL/SLV, pre-swaged/non-swaged

CrossLab Capillaries for Waters LC Systems, Agilent Technologies - 5500-1263, Quick turn capillary

QUICK TURN CAPILLARY ST 025X150MM - 5500-1262

CAPILLARY ST 025X105 U6 - 5500-1261

QUICK CONNECT CAPILLARY ST 025X400MM - 5500-1260

QUICK CONNECT CAPILLARY ST 025X150MM - 5500-1259

QUICK TURN CAPILLARY SS 0.17 X 700MM - 5500-1237, Quick Turn capillary

CrossLab Quick Connect and Quick Turn Fittings for HPLC, Agilent Technologies - 5500-1234, Quick turn capillary

QUICK TURN CAPILLARY SS 0.17 X 200MM - 5500-1195, Quick Turn capillary, peristaltic pump kit for the Cary Routine Sampler Accessory

QUICK CONNECT CAPILLARY SS 0.12 X 500MM - 5500-1180, Quick Connect capillary, none/SL, -/non-swaged

QUICK CONNECT CAPILLARY SS 0.12 X 400MM - 5500-1179, Quick Connect capillary, long socket, none/SL, -/non-swaged

CrossLab Quick Connect and Quick Turn Fittings for HPLC, Agilent Technologies - 5500-1178, Quick connect capillary, -/SL, -/non-swaged

QUICK CONNECT CAPILLARY ST 0075X250MM - 5500-1177

QUICK CONNECT CAPILLARY ST 0075X220MM - 5500-1176

QUICK CONNECT CAPILLARY SS 0.12 X 220MM - 5500-1171, Quick Connect capillary, none/SL, -/non-swaged

FRIT 1290 BIO PUMP OUTLET FILTER PK2 - 5320-0048

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - 5200-0176, FID jet, universal fit

Crosslab SPME Fibers, Agilent Technologies - 5191-5874, SPME fiber, DVB/Carbon WR/PDMS/10, gray

CONSUMABLE REFILL KIT G9223AA MMI INLET - 5191-4204

CONSUMABLE REFILL KIT INTUVO SSL INLET - 5191-4203

IDP-15 TIP SEAL REPLACEMENT KIT - 5190-9613

Closures for 2 ml Screw Top Vials, Agilent Technologies - 5190-7023, Blue, certified

ENTPRISE EDTN LCMS OQ/PV SULFA STD 6X2ML - 5190-0580

CAFFEINE STANDARD ENTERPRISE EDITION KIT - 5190-0488

Inserts for High Recovery Vials, Agilent Technologies - 5181-1270, 2.5 ml, Vial inserts

SAMPLE LOOP SS 20ML 1/8OD - 5068-0336

SYSTEM CAP. KIT PREP LCUV 80-200 ML/MIN - 5067-7018

SYSTEM CAP. KIT PREP LCUV 40-80 ML/MIN - 5067-7017

SYSTEM CAP. KIT PREP LCUV 15-40 ML/MIN - 5067-7016

SYSTEM CAP. KIT PREP LCUV 4-8 ML/MIN - 5067-7015

HOLDER MANINJECT-PREP - 5067-6831

DELAY COIL KIT FOR 80-200ML/MIN - 5067-6804

DELAY COIL KIT FOR 15-40ML/MIN - 5067-6801

QUICK CONNECT ASSEMBLY SS 0.25 X 105MM - 5067-6210, InfinityLab Quick Connect assembly, QC/SX, pre-swaged/non-swaged

CrossLab Quick Connect and Quick Turn Fittings for HPLC, Agilent Technologies - 5067-6168, Quick connect fitting assembly with capillary, quick connect fitting/SL, pre-swaged/non-swaged

QUICK CONNECT ASSY ST 0075X220MM - 5067-6164

CrossLab Capillaries for HPLC, Agilent Technologies - 5067-4656, Standard capillary, preparative, pre-swaged S fittings

CAPILLARY KIT ONLINE SPE MULTI CARTRIDGE - 5067-4296

ONLINE SPE DIRECT INJECT CAPILLARY KIT - 5067-4295

FILTER ASSEMBLY IN-LINE WITH 2.1X0.2MM - 5067-1603, InfinityLab Quick Change inline filter assembly, maximum pressure 1300 bar, stainless steel, 2.1 mm int.Ø., 0.2 µm pore size, for UHPLC

Pistons and Seals, Agilent Technologies - 5063-6589, Piston seal, graphite filled

DITHIODIPROPRIONIC 5G - 5062-2479

AA STANDARD 10PMOL 1ML 10/PK - 5061-3334

AA STANDARD 25PMOL 1ML 10/PK - 5061-3333

AA STANDARD 100PMOL 1ML 10PK - 5061-3332

AA STANDARD 250PMOL 1ML 10PK - 5061-3331

AA STANDARD 1NMOL 1ML 10PK - 5061-3330

SEALINGMAT 96WL ROUND PRESLITTD SIL PK50 - 5043-9317, Sealing mat, 96 wells, round, preslitted

PLATE 96WELL 0.5ML ROUND U PP 14MM PK120 - 5043-9311, 96-well plate

WELL PLATE 96/0.5ML RD U 14MM PP PK30 - 5043-9310, 96-well plate

FITTINGS ESD PEEK 5/16 TO 3/16IN PK12 - 5043-1847

FLEX BENCH FLOOR WITH PS - 5043-1759

FITTING FOR 4.7MM TUBING PK2 - 5043-1335

NUT BLANK BIO COMPATIBLE V-M4 - 5005-0064

SAMPLE LOOP ISIS 2.50ML VOL 1.00MM ID - 5005-0037

SAMPLE LOOP ISIS 1.50ML VOL 1.00MM ID - 5005-0035

BYPASS CAPILLARY SS 0.6MM - 5005-0000

CAPILLARY MP35N 0.12X150 MM - 5004-0047

CAPILLARY MP35N 0.12X280 MSL - 5004-0046

CAPILLARY MP35N 0.12X105 SL - 5004-0044

CAPILLARY MP35N 0.12X130 M - 5004-0043

CAPILLARY MP35N 0.12X130 MSL - 5004-0042

CAPILLARY MP35N 0.17X90 SISX - 5004-0040

CAPILLARY MP35N 0.12X170 MM - 5004-0022

CAPILLARY MP35N 0.12X85 MM - 5004-0021

FLUTED DISC 6 USP 37-2000 OR 37-3000 - 37-4000

BIO-DIS SAMPLE PROBE 55IN - 27-6500

FRIT 10UM - 2759098800

FLOW CELL 9X0 INERT (ANALYTICAL) - 210181800

FILTERTIP/100 20 MICRON PK100 - 17-4130

HPLC Mobile Phase Reservoir Bottle. Graduated borosilicate glass. 1 liter capacity. 45mm Screw top plastic coated

EXPDirect Connect Holder Fittings. Included, for use w/EXPGuard and Trap Cartridges

EXPHAND-TIGHT Nuts & EXPTitanium Hybrid Ferrules. 1

Tubing Pliers. For scoring metal HPLC tubing. With safety latch. 1 each

Flanging Tool. Supplied with (5) Flanging Discs Clean-Cut Cutting Tool PTFE Tubing 1/16 inch x 0.75mm, 2meters and plastic carrying case. 1 Each

PEEKHPLC 1/8in NPT adapter. Featuring an external 1/8in NPT thread and an internal 1/4-28 flat-bottom receiving port, for connecting tubing using traditional 1/4-28 threaded fittings to receiving ports expecting 1/8in NPT threads

PEEKHPLC union body. Without included fittings, featuring a 0.010in through-hole

Cleaving Tiles. For cutting fused capillaries. Use in Capillary Electrophoresis or Gas Chromatography

Replacement Cap Frit Filters for Trident Guard Cartridges, Restek - 25022

SF00S05-0546WP, BioPro SP-F, 5um, 50x4.6mm Column.

Hplc Column, Ultra Ii Biphenyl 50 X 2.1 X 5.0.

Vials, Headspace 10Ml, 23X75Mm, 20Mm Crimp Flat Bottom, 1000Pack.

Vials, Headspace 20Ml, 23X75Mm, 20Mm Crimp Flat Bottom, 100Pack.

Cup Splitter Liner 4Mm X 6.3 X 78.5. For Agilent Gc'S Siltek Deact, 5Pack.

Ultra Cyano 5Um 100A 150X4.6Mm.

Vials, Headspace 20Ml 23X75, 20Mm Crimp Flat Bottom 1000Packs.

Tool, Scoring Wafer With Handle, 2Pack.

Injector Wrench For Aglient 5890/6890/6850 Gc'S.

RS08S05-2503WT: Pro C18 RS, 5um, 80A, 250 X 3.0 mm Endcapped Column.

AS12S03-0546WT, PRO C18, 3UM, 120A, 50 x 4.6mm Endcapped Column.

Prsphr Rp-18E 2Um Hibar Hr100-2.1.

NEEDLE REPLACEMENT JET PLATINUM/LRIDIUM - B0510364

NEEDLE HS40 SMALL BORE STERILE - B0500987

NEEDLE HS40 SEAL ASSEMBLY - B0500833

NEEDLE HS-100 SAMPLE - B0131385

Small Probe Adapter for Restek Electronic Leak Detector, Restek - 22658, Small Probe Adaptor for Leak Detector

SoftSide Carry and storage Case.

Interface HP6890/5890 Kit. Interface Kit, HP6890/5890, For connection to a split/splitless or packed column injector of an Agilent 6890, 6850, 5890, or 5890 Series 2 gas chromatograph

Burner Head Single Slot for PerkinElmer Analyst Series Spectrometer, Slot Length: 5cm, Flame Type: Nitrous Oxide-Acetylene for with air-acetyleneor rotated to provide reduced sensitivity.

THGA Graphite Tubes with End Cap, Pkg 20. .

TIP GRAPHITE FUME EXTRACTION. .

Torch, Quartz, demountable, single slot. for Optima 2x00/4x00/5x00/7x00 DV, for quartz tubing for plasma and auxiliary gas flow, standard torch for aqueous solutions. 3-slot torches are typically used for organic analysis.

CUPS SAMPL 1.2ML AS-71 PK2000. 1.2mL Polypropylene Disposable Sample Cups, Pkg. 2000

Solvent Flex Yellow Peristaltic Pump Tubing kit. Solvent Flex Yellow Peristaltic Pump Tubing Kit, Red/Red i.d. 0.045in (1.14mm) for 2mL/min flow rate, Includes 6in PTFE tubing, to adapt 0.045in. Inner diameter tubing to the nebulizer capillary tubing.

Matrix Modifier Mg(N03)2, for Graphite FurnaceAA, Concentration: 1% Mg (as nitrate), High purity compounds minimize the risk of contamination, used to reduced analyte volatility, ready-to-use, Volume: 100mL

Plug F/UV/Vis Spectroscopy.

Butyl Rubber Stoppers With Caps Pk/1000. .

Column Nut Replacement 1/16 in, Connects capillary column to adapter.

500 -L Stainless Steel Sample. Loop for Models 7125/7010 Rheodyne Injectors

Rinsing Agent Bottle. .

Peristaltic Pump Tubing, Black/Black, Solvent Flex, Yellow, Inner diameter: 0.030 in. (0.76 mm).

Pd Matrix Modifier for Graphite Furnace AA, Concentration: 1% Pd (as nitrate), Volume: 50mL. .

Standard. Copper (Cu), Pure Grade, Single-Element Atomic Spectroscopy Calibration Standard, 1, 000 ug/mL, Matrix: 2% HNO3, Starting Material: Cu, Size: 100 mL

Standard. Mercury (Hg), Pure Grade, Single-Element Atomic Spectroscopy Calibration Standard, 1, 000 ug/mL, Matrix: 10% HNO3, Starting Material: Hg, Size: 100 mL

Quality Control Standard, 21 Elements, Matrix per Volume 5% HNO3 per 100mL.

Standard. Magnesium (Mg), Pure Grade, Single-Element Atomic Spectroscopy Calibration Standard, 1, 000 ug/mL, Matrix: 2% HNO3, Starting Material: Mg, Size: 500 mL

Standard. Calcium (Ca), Pure Grade, Single-Element Atomic Spectroscopy Calibration Standard, 1, 000 ug/mL, Matrix: 2% HNO3, Starting Material: Ca, Size: 500 mL

Mercury Standard for Flow Injection Mercury System, 10-g/mL Hg in 2% HNO3, Volume: 100mL.. .

Ultra Cyano (USP L10). High-purity cyano phase with few silanol sites.Particle size: 5-m, spherical, Pore size: 100+, Carbon load: 8%, Fully endcapped, pH range: 2.5 to 7.5, Temperature limit: 80-C.-

Cart Mult Aff Rem Spin 0.45Ml. Ok to place as a misc transaction

Consumables Kit -E9/Drc-E.

Disposable Animal Feeding Needles Malleable 304 Stainless Steel 20G X 2.8inch, 1.9Mm Ball.

Rxi®-5HT Columns, Restek - 13924

Rxi®-5HT Columns, Restek - 13923

Rxi®-5HT Columns, Restek - 13908

Kit-Lc/Uhplc General Starter.

Q-sep dSPE tubes Q371 50-pack. 900mg MgSO4, 150mg PSA, 15mg GCB

30M, 0.25Mm Id, 0.25Um.

30M, 0.25Mm Id, 0.10Um.

For Cleaning Mass Spec Parts.

For Ms Pumps, 1 Liter.

0.4Mm, 10Pk.

0.5Mm, 10Pk.

1/32in & 1/16in Tools.

Electronic Flowmeter, Battery.

1/8in & 1/4in Tubing Reamer.

Single Reflection Hatr Accy. Designed for the analysis of highly absorbing solid, semi-liquid and liquid samples. The sampling plate is a small round crystal for small sample volumes (5l and higher). Includes ge crystal (5500-870 cm-1) compression clamp, volatiles cover and purge attachments.

Accessories for Spectrum Twoâ„¢ QA/QC Analysis Systems, PerkinElmer - L1600246, Wireless Router Kit for Spectrum Two

Ftir Intro Kit (1 User).

Accessories for Spectrum Twoâ„¢ QA/QC Analysis Systems, PerkinElmer - L1600233, UPS Battery Pack for Spectrum Two

Ft-Ir Nutraceutical Compliance Pack. Facilitates ir spectroscopy analysis for nutraceutical and traditional medicine professionals. Covers the requirements of 7 pharmacopoeias (usp, bp, ep, ip, jp, cp and intphr)

Spectrum Twoâ„¢ FT-IR Spectrometer and Analysis Systems, PerkinElmer - L1608022, Educational Starter Pack

Accessories for Spectrum Twoâ„¢ QA/QC Analysis Systems, PerkinElmer - L9004200, UATR Carrying Case for Spectrum Two

Contains Accessories, Consumables And Application Software To Perform Used Oil Analysis.

Spectrum Twoâ„¢ FT-IR Spectrometer and Analysis Systems, PerkinElmer - L1608004, Pharmacopeia FT-IT Compliance Resource Pack

Spectrum Twoâ„¢ FT-IR Spectrometer and Analysis Systems, PerkinElmer - L1608003, Educational FT-IR Application Pack

Ft-Ir Educational Resource Pack. Contains two cds designed for use in the teaching of ft-ir spectroscopy. Contains 15 experiments for a curriculum or adapted to meet the individual needs. The experiments are designed to: 1 develop basic ftir skills; 2 sampling techniques; 3 identify materials;

Enviro Astm D7066-04 App Pack.

Enviro Cyclohexane App Pk.

Benz In Gas Astm D4053-04 Pk.

Atr Miracle: Znse; 1 Bounce.

Ir Biodiesel Application Pack.

Atr Miracle: Ge, 1 Bounce.

STAINLESS STEEL STAND FOR 48 HIGH CHROM COLUMN.

13385 GAUGE, Pressure. 0-160psi 1/8NPT STAINLESS STEEL GAUGE 1.5 DIAL.

5873 COLUMN, Flash Chromatography, Epoxy Coated, Modified. 41MM FLASH CHROMATOGRAPHY COLUMN ONLY, EPOXY COATED, POROSITY B, #25 ACE-THRED.

5860 COLUMN HEAD. 6,#50 COLUMN HEAD.

5821 CHROMATOGRAPHIC COLUMN, Jacketed. 50MM ID 1200MM JACKETED CHROMATOGRAPHY COLUMN WITH #50 ACE- THREDS.

5821 CHROMATOGRAPHIC COLUMN, Jacketed. 50MM ID 600MM JACKETED CHROMATOGRAPHY COLUMN WITH #50 ACE- THREDS.

5821 CHROMATOGRAPHIC COLUMN, Jacketed. 50MM ID 450MM JACKETED CHROMATOGRAPHY COLUMN WITH #50 ACE- THREDS.

5821 CHROMATOGRAPHIC COLUMN, Jacketed. 50MM ID 300MM JACKETED CHROMATOGRAPHY COLUMN WITH #50 ACE- THREDS.

5821 CHROMATOGRAPHIC COLUMN, Jacketed. 25MM ID 300MM JACKETED CHROMATOGRAPHY COLUMN WITH #25 ACE- THREDS.

5821 CHROMATOGRAPHIC COLUMN, Jacketed. 15MM ID 600MM JACKETED CHROMATOGRAPHY COLUMN WITH #15 ACE- THREDS.

Viva C18 5um Columns. (USP L1) High proportion of pore/surface area available to large molecules. Excellent general-purpose column for analyzing large molecules and biomolecules. Particle size: 5um spherical/pore size: 300A/carbon load: 9%/endcapped/pH range: 2.5 to 10/temp. limit: 80C. 250x4.6mm

Viva C18 5um Columns. (USP L1) High proportion of pore/surface area available to large molecules. Excellent general-purpose column for analyzing large molecules and biomolecules. Particle size: 5um spherical/pore size: 300A/carbon load: 9%/endcapped/pH range: 2.5 to 10/temp. limit: 80C. 150x4.6mm

Viva C18 5um Columns. (USP L1) High proportion of pore/surface area available to large molecules. Excellent general-purpose column for analyzing large molecules and biomolecules. Particle size: 5um spherical/pore size: 300A/carbon load: 9%/endcapped/pH range: 2.5 to 10/temp. limit: 80C. 100x4.6mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.60m 0.53mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.60m 0.32mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.30m 0.53mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.30m 0.32mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.15m 0.53mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.15m 0.32mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.60m 0.32mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.60m 0.25mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.30m 0.53mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.30m 0.32mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.30m 0.25mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.15m 0.32mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.15m 0.25mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.60m 0.32mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.60m 0.25mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.30m 0.32mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.30m 0.25mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.15m 0.32mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.15m 0.25mm

Rtx-WAX Capillary Column. General purpose columns for FAMEs solvents BTEX aromatics flavor compounds. Temperature range: 20C to 250C. The extended operating temperature range allows analysis of compounds having a wide volatility range and ensures low bleed at temperatures.30m 0.25mm

Allure PFP Propyl 5UM Columns 250x4.6MM. (USP L43) A pentafluorophenyl phase with a propyl spacer.Highly retentive for basic analytes. Separates nucleosides, nucleotides, purines, pyrimidines, halogenated compounds.Pore Size60+/carbon load: 17%/fully endcapped/pH range:2.5 to 7.5/temp limit:80-C.

Allure PFP Propyl 5UM Columns 250x2.1MM. (USP L43) A pentafluorophenyl phase with a propyl spacer.Highly retentive for basic analytes. Separates nucleosides, nucleotides, purines, pyrimidines, halogenated compounds.Pore Size60+/carbon load: 17%/fully endcapped/pH range:2.5 to 7.5/temp limit:80-C.

Allure PFP Propyl 5UM Columns 150x4.6MM. (USP L43) A pentafluorophenyl phase with a propyl spacer.Highly retentive for basic analytes. Separates nucleosides, nucleotides, purines, pyrimidines, halogenated compounds.Pore Size60+/carbon load: 17%/fully endcapped/pH range:2.5 to 7.5/temp limit:80-C.

Allure PFP Propyl 5UM Columns 150x2.1MM. (USP L43) A pentafluorophenyl phase with a propyl spacer.Highly retentive for basic analytes. Separates nucleosides, nucleotides, purines, pyrimidines, halogenated compounds.Pore Size60+/carbon load: 17%/fully endcapped/pH range:2.5 to 7.5/temp limit:80-C.

Allure PFP Propyl 5UM Columns 50x4.6MM. (USP L43) A pentafluorophenyl phase with a propyl spacer.Highly retentive for basic analytes. Separates nucleosides, nucleotides, purines, pyrimidines, halogenated compounds.Pore Size60+/carbon load: 17%/fully endcapped/pH range:2.5 to 7.5/temp limit:80-C.

Allure PFP Propyl 5UM Columns 50x2.1MM. (USP L43) A pentafluorophenyl phase with a propyl spacer.Highly retentive for basic analytes. Separates nucleosides, nucleotides, purines, pyrimidines, halogenated compounds.Pore Size60+/carbon load: 17%/fully endcapped/pH range:2.5 to 7.5/temp limit:80-C.

Allure PFP Propyl 5UM Columns 30x4.6MM. (USP L43) A pentafluorophenyl phase with a propyl spacer.Highly retentive for basic analytes. Separates nucleosides, nucleotides, purines, pyrimidines, halogenated compounds.Pore Size60+/carbon load: 17%/fully endcapped/pH range:2.5 to 7.5/temp limit:80-C.

Allure PFP Propyl 5UM Columns 30x2.1MM. (USP L43) A pentafluorophenyl phase with a propyl spacer.Highly retentive for basic analytes. Separates nucleosides, nucleotides, purines, pyrimidines, halogenated compounds.Pore Size60+/carbon load: 17%/fully endcapped/pH range:2.5 to 7.5/temp limit:80-C.

Allure PFP Propyl 5UM Columns 100x4.6MM. (USP L43) A pentafluorophenyl phase with a propyl spacer.Highly retentive for basic analytes. Separates nucleosides, nucleotides, purines, pyrimidines, halogenated compounds.Pore Size60+/carbon load: 17%/fully endcapped/pH range:2.5 to 7.5/temp limit:80-C.

Allure PFP Propyl 5UM Columns 100x2.1MM. (USP L43) A pentafluorophenyl phase with a propyl spacer.Highly retentive for basic analytes. Separates nucleosides, nucleotides, purines, pyrimidines, halogenated compounds.Pore Size60+/carbon load: 17%/fully endcapped/pH range:2.5 to 7.5/temp limit:80-C.

Allure C18 (USP L1) 5UM Column 250X4.6MM. is the ideal LC/MS column for neutral to slightly polar solutes--separates basic compounds, shows good deactivation; excellent for explosives and steroids.

Allure C18 (USP L1) 5UM Column 150X4.6MM. is the ideal LC/MS column for neutral to slightly polar solutes--separates basic compounds, shows good deactivation; excellent for explosives and steroids.

Allure C18 (USP L1) 5UM Column 50X4.6MM. is the ideal LC/MS column for neutral to slightly polar solutes--separates basic compounds, shows good deactivation; excellent for explosives and steroids.

Allure C18 (USP L1) 5UM Column 50X2.1MM. is the ideal LC/MS column for neutral to slightly polar solutes--separates basic compounds, shows good deactivation; excellent for explosives and steroids.

Allure Biphenyl 5um Column 50x2.1MM. Enhanced selectivity for compounds such as steroids,contraceptive hormones,and tetracyclines.Superior retention for both unsaturated and saturated compounds.Spherical/pore size:60+/carbon load:23%/pH range:2.5 to 7.5/temperature limit:80-C.Endcapped

Allure Biphenyl 5um Column 100x2.1MM. Enhanced selectivity for compounds such as steroids,contraceptive hormones,and tetracyclines.Superior retention for both unsaturated and saturated compounds.Spherical/pore size:60+/carbon load:23%/pH range:2.5 to 7.5/temperature limit:80-C.Endcapped

Ultra Aqueous C18 5um Columns 250x4.6MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 250x2.1MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 150x4.6MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 150x2.1MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 50x4.6MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 50x2.1MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 30x4.6MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 30x2.1MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 200x4.6MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 200x2.1MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 100x4.6MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 100x2.1MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 5um Columns 150x4.6MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 5-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 3um Columns 150x2.1MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 3-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 3um Columns 50x4.6MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 3-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 3um Columns 50x2.1MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 3-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 3um Columns 30x4.6MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 3-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 3um Columns 30x2.1MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes..Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 3-m spherical/pore size:100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 3um Columns 100x4.6MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 3-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Ultra Aqueous C18 3um Columns 100x2.1MM. (USP L1) Highly retentive and selective for reversed phase separations of polar analytes.Compatible with highly aqueous (up to 100%) mobile phases.Particle size: 3-m spherical/pore size: 100+/not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C.

Rxi-5ms Capillary GC Column. General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 30m .53mm

Rxi-5ms Capillary GC Column. General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 30m .25mm

Rxi-5ms Capillary GC Column. General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 30m .32mm

Rxi-5ms Capillary GC Column. General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 60m .25mm

Rxi-5ms Capillary GC Column. General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 30m .32mm

Rxi-5ms Capillary GC Column. General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 30m .25mm

Rxi-5ms Capillary GC Column. General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 15m .32mm

Rxi-5ms Capillary GC Column. General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 15m .25mm

Rxi-5ms Capillary GC Column. General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 20m .18mm

Rxi-1ms Capillary GC Column. General purpose columns for drugs of abuse, essential oils, hydrocarbons, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 60m .25mm

Rxi-1ms Capillary GC Column. General purpose columns for drugs of abuse, essential oils, hydrocarbons, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 20m .18mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 60m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 60m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 60m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 60m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 60m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 60m 0.25mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.25mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.25mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 60m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 60m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 60m 0.25mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.25mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.25mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 60m 0.25mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.53mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.32mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 30m 0.25mm

Stabilwax (Fused Silica) General purpose column. Resistant to oxidative damage. Temperature range: 40C to 250C. The polar-deactivated surface tightly binds the Carbowax polymer and increases thermal stability. 15m 0.25mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 250x4.6mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 250x2.1mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 150x4.6mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 150x2.1mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 50x4.6mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 50x2.1mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 30x4.6mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 30x2.1mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 200x4.6mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 200x2.1mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 100x4.6mm

Ultra IBD 5um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 5um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 100x2.1mm

Ultra IBD 3um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 3um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 150x4.6mm

Ultra IBD 3um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 3um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 150x2.1mm

Ultra IBD 3um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 3um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 50x4.6mm

Ultra IBD 3um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 3um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 50x2.1mm

Ultra IBD 3um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 3um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 30x4.6mm

Ultra IBD 3um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 3um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 30x2.1mm

Ultra IBD 3um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 3um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 100x4.6mm

Ultra IBD 3um Columns. An intrinsically base-deactivated (IBD) phase, containing a polar group within, or intrinsic to, the hydrocarbon bonded phase. Particle size: 3um spherical/pore size: 100A/carbon load: 12%/Not encapped/pH range: 2.5 to 7.5/temperature limit: 80-C 100x2.1mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 250x4.6mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 250x2.1mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 150x4.6mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 150x4.0mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 150x2.1mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 50x4.6mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 50x2.1mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 30x4.6mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 30x2.1mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 200x4.6mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 200x2.1mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 100x4.6mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 100x4.0mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 5um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 100x2.1mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 3um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 50x4.6mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 3um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 50x2.1mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 3um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 30x4.6mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 3um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 30x2.1mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 3um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 100x4.6mm

Ultra C18 3um Columns (USP L1). Excellent general-purpose reversed phase column. Particle size: 3um spherical/pore size: 100A/carbon load: 20%/fully endcapped/pH range: 2.5 to 7.5/temperature limit: 80-C 100x2.1mm

VWR Wall Bracket. Supports three single cylinders, 10.2 to 30.5cm in diameter.

Standard Metal Hub Luer Lock Needles, Hamilton Company - 91022, Standard Metal Hub Luer Lock Needle

SYRINGE, LUER LOCK, MICRO-MATE. 5cc. Subdivisions: 1/5cc. Borosilicate glass syringe with interchangable barrels and plungers. Colored plunger ends identify the capacity of the syringe. Flanges are flat on two sides to prevent syringe from rolling.

TLC Spotting Capillary Tubes. Length: 15.2cm. Noncalibrated tubes made from borosilicate glass for use with aqueous and organic solutions. Packed in 0.23kg package.

MALEIMIDE PSORALEN TMP 1MG - 39061

CELL METER GLUCOSE UPTAKE IMAGING KIT - 23501

ACID 7.1WS TQ7.1WS 5MG - 2114

96-WELL PLATE FOIL SEAL - 5067-5154

LC COLUMN RAPTOR POLAR X 2.7UM 100X2.1MM - 9311A12

LC COLUMN RAPTOR POLAR X 2.7UM 50X2.1MM - 9311A52

LC COLUMN RAPTOR POLAR X 2.7UM 30X2.1MM - 9311A32

HALO® ES-C18, BIOCLASS, HPLC Columns, Advanced Materials Technology - 91122-602

CARTRIDGE ACRYLAMIDE GUARD 5UM 10X2.1MM - 916750212

Spanner Wrenches, Avantor. Spanner Wrenches, Hichrom - HI-940, Combination spanner ³/8 IN.

96-Well EVA and Silicone Microplate Covers, EVA microplate cover, square well

96-Well EVA and Silicone Microplate Covers, Silicone microplate cover, pre-cut, square well

96-Well EVA and Silicone Microplate Covers, Silicone microplate cover, thick pre-cut, square well

96-Well EVA and Silicone Microplate Covers, Silicone microplate cover, thin pre-cut, round well, 7 mm Ø

96-Well EVA and Silicone Microplate Covers, Silicone microplate cover, pre-cut, round well, 7 mm Ø

96-Well EVA and Silicone Microplate Covers, Silicone microplate cover, round dome, 8 mm Ø

96-Well Polypropylene Microplates, Polypropylene shallow well microplate

96-Well Polypropylene Microplates, Polypropylene deep well microplate

96-Well Polypropylene Microplates, Polypropylene deep square well microplate

96-Well Polypropylene Microplates, Polypropylene medium well microplate

OPTI-CAP 3PORT FOR GL-45 THREADED BOTTLE - 27836

SPARGER FILTER FLANGELESS SS 20UM 1/8IN - 27832

SPARGER FILTER FLANGELESS SS 2 UM 1/8IN - 27830

TUBING PREMIUM GRD SS 1/16X0.020 IN 3 M - 27775

UNION PEEK 0.25MM BORE 1/16IN TUBING PK2 - 27715

Leak Detector Kit Compact, Handheld. Leak Detector kit, Includes: carrying case, universal AC power adaptor [U.S, Australia, Japan], 6-ft USB charging cable, Charging kit includes both universal AC power adaptor and USB charging cable so you can charge anywhere, anytime, Compact, handheld unit easy

Spme Fiber 50 Dvb / 30 Carbon Wr)/PDMS. SPME Fiber, DVB/C-WR/PDMS (Divinylbenzene/Carbon Wide Range/Polydimethylsiloxane), Colour: dark gray, Suitable for a wide range of analyte chemistries and sample matrices, Reliable performance meets or exceeds other brands, thickness 50/30um, Fiber length 10mm

Spme Fiber Dark Gray 220 - 300 Deg C 80 Um. SPME Fiber, Material: 80 um (50 DVB / 30 Carbon WR)/PDMS Fiber, Color: Dark Gray, Reliable performance meets or exceeds other brands, Optimized for PAL system autosamplers and compatible with most GC inlets, Recommended Operating Temp.: 220-300 degree C

Sulfinert Regulator Dual Stage Cga 660. Regulator, dual Stage, Material: Sulfinert-Treated, Fittings: CGA 660 (NO, NO2, SO2), continuous emission monitoring, Outlet Gauge: 30 in, 0 to 200 psig (0-1,379 kPa), Outlet Pressure: 0 to 150 psig (0-1,034 kPa), Reactive/corrosive gas, Off-shore platform

Sulfinert Regulator Dual Stage Cga 510. Regulator, dual Stage, Material: Sulfinert-Treated, Fittings: CGA 510 (multiple), continuous emission monitoring, Outlet Gauge: 30 in, 0 to 200 psig (0-1,379 kPa), Outlet Pressure: 0 to 150 psig (0-1,034 kPa), Reactive/corrosive gas, Off-shore platform systems

Sulfinert Regulator Single Stage Cga 350. Regulator, single Stage, Material: Sulfinert-Treated, Fittings: CGA 350 (H2, P5), continuous emission monitoring, Outlet Gauge: 30 in, 0 to 200 psig (0-1,379 kPa), Outlet Pressure: 0 to 150 psig (0-1,034 kPa), Reactive/corrosive gas, Off-shore platform

Sulfinert Regulator Dual Stage Cga 350. Regulator, Dual Stage, Material: Sulfinert-Treated, Fittings: CGA 350 (H2, P5), continuous emission monitoring, Outlet Gauge: 30 in, 0 to 200 psig (0-1,379 kPa), Outlet Pressure: 0 to 150 psig (0-1,034 kPa), Reactive or corrosive gases, Off-shore platform

Spme Fiber Polydimethylsiloxane 65Um10Mm. SPME Fiber, Colour: Violet, Material: Divinylbenzene (DVB)/PDMS, Suitable for a wide range of analyte chemistries and sample matrices, aluminum hub is more durable than plastic, Fiber thickness: 65um, length: 10 mm, Max Temperature: 300 degree C

Spme Fiber Divinylbenzene 65Um Len 10Mm. SPME Fiber, Colour: Violet, Material: Divinylbenzene (DVB)/PDMS, Suitable for a wide range of analyte chemistries and sample matrices, aluminum hub is more durable than plastic, Fiber thickness: 65um, length: 10mm, Max Temperature: 300 degree C

Spme Fiber Dvb/PDMS 65Um Thick Len 10Mm. SPME Fiber, Colour: Violet, Material: Divinylbenzene (DVB)/PDMS, Suitable for a wide range of analyte chemistries and sample matrices, Robust aluminum hub is more durable than plastic, Fiber thickness: 65um, length: 10mm, Max Temperature: 300 degree C

Spme Fiber Dark Gray Divinylbenzene 10Mm. SPME Fiber, Colour: dark gray, Material: DVB/C-WR/PDMS (Divinylbenzene/Carbon Wide Range/Polydimethylsiloxane), Suitable for a wide range of analyte chemistries and sample matrices, Robust aluminum hub is more durable, Fiber thickness: 50/30um, length: 10mm

Sulfinert Regulator Single Stage Cga 330. Regulator, single stage, cem continuous emission monitoring, Material: Sulfinert-Treated, Fitting : CGA 330, Outlet Gauge: 30 in, 0 to 200 psig (0-1,379 kPa), Outlet Pressure: 0 to 150 psig (0-1,034 kPa), stack and gas emission standards, Off-shore platform

LRC C8/SCX 200mg/10mL, LRC.

SPE Frit 10mL LRC, 1/16 Inches, 20um (J-SB-A-P).

Cover For 1000Ml Round Bucket Rotor Set.

Syringe, Material: Plastic, Size: 5Ml, Luer-Lok.

Spin Cartridge Cap And Plug, Size: Pk/6 Each.

Multiple Affinity Removal Spin Cartridge - Ms-3 (Mouse), 0.45 Ml. Multiple Affinity Removal Spin Cartridge - Ms-3 (Mouse), Cartridge Eliminates Approximately 80% Of Total Protein (Albumin, Igg, And Transferrin), Serum Load Volume Between 25 - 30 Ul Per Run, Total Load Volume Is 200 Ul, Size: 0.45 Ml

Multiple Affinity Removal Column - Ms-3 (Mouse) 4.6 X 50 Mm. Multiple Affinity Removal Column - Ms-3 (Mouse), Remove Three Interfering High-Abundant Proteins From Mouse Plasma Samples, Improves The Electrophoretic Of The Serum Sample, End-Fitting Material: Peek With 2 Um Frits, Size: 4.6 X 50 Mm

Gc Accelerator Oven Insert Kit, For Agilent 6890 And 7890 Instruments, Installs Easily Without Damaging The Gc Column Or Interfering With The Ms Interface, Accurately Convert Methods To A Scaled-Down Column Format, Increase Sample Throughput Without Capital Investment

Raptor Biphenyl LC Column 1.8um. Raptor Biphenyl LC Column, Pore Size: 90 A, Length: 150 mm, Internal Diameter: 2.1 mm, Ideal for bioanalytical testing applications like drug and metabolite analyses, Part of Raptor LC column line featuring 1.8, 2.7, and 5 um SPP core-shell silica, size: 1.8um

Raptor ARC-18 LC Column 1.8um. Raptor ARC-18 LC Column, Pore Size: 90 A, Length: 100 mm, Internal Diameter: 2.1 mm, Ideal for high-throughput LC-MS/MS applications with minimal sample preparation, Sterically protected to endure low-pH mobile phases without sacrificing retention, size: 1.8um

Multiple Affinity Removal Column 4.6 x 50 mm. Multiple Affinity Removal Column, 4.6 x 50 mm (0.83 mL bed volume), Hu-14: 20ul, Material: PEEK, Flow rate range 0.125 - 3.0 mL/min, Operating temperature: 18-25C, Total protein removed: 94%, To remove 14 high-abundant proteins from human plasma sample

Multiple Affinity Removal Column 4.6 x 100 mm. Multiple Affinity Removal Column, 4.6 x 100 mm (0.83 mL bed volume), Hu-14: 20ul, Material: PEEK, Flow rate range 0.125 - 3.0 mL/min, Operating temperature: 18-25C, Total protein removed: 94%, To remove 14 high-abundant proteins from human plasma sample

Massachusetts APH Mix (26 components) 104 l. Massachusetts APH Mix (26 components), Conc. In Solvent and Volume:1 ppm in nitrogen, 104 liters at 1,800 psi, Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-5%, high-quality air monitoring gas calibration standards, Size: 104 l

Airgas Transportable Pure Gases and Mixtures Carbon dioxide in nitrogen (100 ppm) 14 liter. Airgas Transportable Pure Gases and Mixtures Carbon dioxide in nitrogen (100 ppm), Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-5%, calibrating to multicomponent mixes, Size: 14 liter

Airgas Transportable Pure Gases and Mixtures Carbon dioxide in nitrogen (100 ppm)14 liter. Airgas Transportable Pure Gases and Mixtures Carbon dioxide in nitrogen (100 ppm), Product Grade: Blend tolerance: +/-10%, Analytical accuracy: +/-5%, calibrating to multicomponent mixes, Size: 14 liter

Ozone Precursor/PAMS Mix 104L. Ozone Precursor/PAMS Mix, (57 components at EPA Concentrations: ppbC), high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air), Product Grade: Blend tolerance: +/-20% Analytical accuracy: +/-10%, Size: 104L

TO-15 Subset 25 Component Mix (25 components) 104 l. TO-15 Subset 25 Component Mix (25 components), Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-10%, Conc. In Solvent and Volume:100 ppb in nitrogen, 104 liters at 1,800 psi, high-quality air monitoring gas calibration, Size: 104 l

Ozone Precursor Mixture/PAMS (57 components) 104L. Ozone Precursor Mixture/PAMS (57 components), Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-10%, Conc. In Solvent and Volume:100 ppb in nitrogen, 104 liters at 1,800 psi, high-quality air monitoring gas calibration, Size: 104

BTEX Gas Mix (6 components) 104 l. BTEX Gas Mix (6 components) Benzene (71-43-2), Ethylbenzene (100-41-4), Toluene (108-88-3), m-Xylene (108-38-3), o-Xylene (95-47-6), p-Xylene (106-42-3), Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-10%, high-quality air monitoring gas, Size: 104L

TO-14A Internal Standard Mix (3 components) 104L. TO-14A Internal Standard Mix (3 components), Bromochloromethane, Chlorobenzene-d5, 1,4-Difluorobenzene, Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-10%, high-quality air monitoring gas calibration standards, Size: 104L

TO-14A Internal Standard/Tuning Mix (4 components) 104 l. TO-14A Internal Standard/Tuning Mix, Bromochloromethane, 1-Bromo-4-fluorobenzene (4-Bromofluorobenzene), Chlorobenzene-d5, 1,4-Difluorobenzene, Product Grade: Blend tolerance: +/-10%, Analytical accuracy: +/-10%, monitoring gas, Size: 104 l

TO-14A GC-MS Tuning Mix 104 l. TO-14A GC-MS Tuning Mix, Concentration in Solvent and Volume:100 ppb in nitrogen, 104 liters at 1,800 psi, 4-Bromofluorobenzene, Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-10%, high-quality air monitoring gas calibration standards, Size: 104 l

TO-14A Calibration Mix (39 components) 104l. TO-14A Calibration Mix (39 components), Concentration in Solvent and Volume:100 ppb in nitrogen, 104 liters at 1,800 psi, Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-10%, high-quality air monitoring gas calibration standards, Size: 104l

Japan Calibration Mix (9 components) 104 l. Japan Calibration Mix (9 components), Concentration in Solvent and Volume:1 ppm in nitrogen, 104 liters at 1,800 psi, Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-5%, high-quality air monitoring gas calibration standards, Size: 104 l

BTEX Gas Mix (6 components) 104 l. BTEX Gas Mix (6 components), Concentration in Solvent and Volume:1 ppm in nitrogen, 104 liters at 1,800 psi, Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-5%, high-quality air monitoring gas calibration standards by Spectra/Linde, Size: 104 l

TO-14A Internal Standard Mix (3 components) 104l. TO-14A Internal Standard Mix (3 components), Bromochloromethane, Chlorobenzene-d5, 1,4-Difluorobenzene, Concentration in Solvent, Volume: 1 ppm in nitrogen, 104 l at 1,800 psi, Product Grade:Blend tolerance: +/-10%, Analytical +/-5%, Size: 104l

TO-14A GC-MS Tuning Mix 104 l. TO-14A GC-MS Tuning Mix, Concentration in Solvent and Volume:1 ppm in nitrogen, 104 liters at 1,800 psi, Product Grade:Blend tolerance: +/-10%, Analytical accuracy: +/-5%, high-quality air monitoring gas calibration standards are provided by Spectra/Linde, Size: 104 l

TO-14A Chlorinated Hydrocarbon Mix 19 components 104 l. TO-14A Chlorinated Hydrocarbon Mix 19 components, Concentration in Solvent and Volume: 1 ppm in nitrogen, 104 liters at 1,800 psi, Product Grade: Blend tolerance: +/-10%, Analytical accuracy: +/-5%, high-quality air monitoring gas, Size: 104 l

XTI 420 Mix, Column test Mix, Concentration: 420-1050 ug/ml in CH2CL2, Size: 1 mL.

VOA 502.2 Calibration Kit Number1 (2,000 ug/mL). VOA 502.2 Calibration Kit Number1 (2,000 ug/mL), Contains 1 mL each of - Calibration Mix - Number 1, 2, 3, 4, 5, 6

CLP VOA CAL2000 MegaMix Kit, Contains 1mL each of - CLP VOA CAL2000 MegaMix Standard, Vinyl acetate.

VOA Complete Kit 624 series 1 mL. VOA Complete Kit 624 series, Contains - 624 Calibration Mix - Number 1, 2, 3, Internal Standard Mix, Surrogate Standard Mix, Concentration in Solvent and Volume: Contains 1 mL each of these mixtures

EPA Method 525.3 OCP Calibration Standard 29 components. EPA Method 525.3 OCP Calibration Standard, 29 components, Formulated to provide maximum stability, Simplifies and speeds up standard preparation, Quantitatively tested, Concentration in Solvent and

Minnesota Ag List 1 Pesticide Kit, Contains 1 mL each of Minnesota Ag List Pesticides Mix A and B.

PCB Kit Number 3, Aroclor standards exhibit lot-to-lot variation, Contains - Aroclor - 1221, 1232, 1242, 1248, 1254, Aroclor 1016/1260, Concentration in Solvent and Volume: 1,000 ug/mL each in hexane, 1 mL/ampule

Weathered Kerosene Kit 1 mL. Weathered Kerosene Kit, Contains 1 mL each of, Kerosene Standard - 25%, 50%, 75% (Weathered)

CLP 04.1 VOA Kit Number 3, Contains 1 mL each of, VOA Calibration Mix Number 1 (ketones), 502.2 Calibration Mix Number 1 (gases), CLP 04.1 VOA CAL2000 MegaMix Standard

Volatile Organics Kit (2000ug/mL). Volatile Organics Kit (2000ug/mL), Contains 1mL each of, 502.2 Calibration Mix - Number 1, 2, 3, 4, 5, 6, 4-bromofluorobenzene (2500ug/mL), Surrogate Mix (2500ug/mL), nternal Standard Mix (2500ug/mL), System Performance

Trident LC Column Protection System Cartridge Only, Includes:filter holder; cap frit filter (4 mm, 2.0 um); and PEEK ferrule, Type:Level 2: Filter Holder Only, Durable metal tip with replaceable PEEK ferrule means easy installation

Raptor HILIC-Si LC Columns (USP L3) 2.1 mm Length: 150 mm. Raptor HILIC-Si LC Columns (USP L3) 2.1 mm, particle size: 2.7 um, Testing and applications development demonstrated that 2.7 um columns offer higher efficiency than 5 um columns, and they are compatible with HPLC instrument, Length: 150 mm

Raptor HILIC-S EXP Guard Column Cartridge 5 x 2.1 mm. Raptor HILIC-S EXP Guard Column Cartridge, Particle Size: 2.7 um, Maximum cartridge pressure: 600 bar/8,700 psi (2.7 um) or 400 bar/5,800 psi (5 um), Raptor SPP LC columns combine the speed of SPP with the resolution, Diameter: 5 x 2.1 mm

Raptor HILIC-Si LC Columns (USP L3) 2.1 mm Length: 50 mm. Raptor HILIC-Si LC Columns (USP L3) 2.1 mm, particle size: 2.7 um, Testing and applications development demonstrated that 2.7 um columns offer higher efficiency than 5 um columns, and they are compatible with HPLC instrument, Length: 50 mm

SPME Fiber 100um. SPME Fiber, Material: Polydimethylsiloxane, Nonpolar, Color: Red, Robust aluminum hub, Reduces sample handling/ solvent consumption, Temperature: 280 deg C, Operating temperature: 200-280 deg C, For PAL system autosampler, Thickness: 100um, Needle: 23 gauge, Length: 10mm

Straight Inlet Liner 1.5 mm. Straight Inlet Liner with Wool, for Shimadzu 2010 GCs equipped with PTV inlets, Length: 95mm, OD: 3.5 mm, Liner ID: 1.5 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure

Straight Inlet Liner 1.5 mm. Straight Inlet Liner, for Shimadzu 2010 GCs equipped with PTV inlets, Length: 95mm, OD: 3.5 mm, Liner ID: 1.5 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-l

Split Precision Inlet Liner 2.0 mm. Split Precision Inlet Liner with Wool, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3mm, Liner ID: 2.0mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy, Ensure liner-to-liner reproducibility

Low Pressure Drop Inlet Liner 4.0 mm. Low Pressure Drop Inlet Liner with Wool, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3mm, Liner ID: 4.0mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy, Ensure liner-to-liner reproducibility

Frit Inlet Liner 3.4 mm. Frit Inlet Liner with Top Taper, for Bruker/Varian GCs equipped with 1078/1079 inlets, Length: 54mm, OD: 5.0mm, Liner ID: 3.4 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensur

Straight Inlet Liner 3.5 mm. Straight Inlet Liner with Wool, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5mm, Liner ID: 3.5 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accurac

Cyclo Single Taper Inlet Liner 3.5 mm. Cyclo Single Taper Inlet Liner, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5mm, Liner ID: 3.5 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increa

Drilled Uniliner with Hole near Bottom 4mm. Drilled Uniliner with Hole near Bottom, for PerkinElmer Auto SYS GCs equipped with split/splitless inlet, Length: 92.1 mm, OD: 6.2 mm, Liner ID: 4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass,

Drilled Uniliner with Hole near Top 4.0 mm. Drilled Uniliner with Hole near Top, for PerkinElmer Auto SYS GCs equipped with split/splitless inlet, Length: 92.1 mm, OD: 6.2 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass,

Uniliner Inlet Liner 4mm. Uniliner Inlet Liner with Wool, for PerkinElmer Auto SYS GCs equipped with split/splitless inlet, Length: 92.1mm, OD: 6.2mm, Liner ID: 4.0mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & preci

Straight Inlet Liner 4.0 mm. Straight Inlet Liner with Wool, for Thermo TRACE 1300/1310 GCs equipped with SSL inlets, Length: 78.5 mm, OD: 6.3 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precisio

Straight Inlet Liner 3mm. Straight Inlet Liner with wool, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Length: 105mm, OD: 8mm, Liner ID: 3.0mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy, preci

Low Pressure Drop Precision Inlet Liner 4mm. Low Pressure Drop Precision Inlet Liner with Wool, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision

Drilled Uniliner Inlet Liner 4.0 mm. Drilled Uniliner Inlet Liner with Hole near Bottom, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Incr

Drilled Uniliner Inlet Liner 4.0 mm. Drilled Uniliner Inlet Liner with Hole near Bottom, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision

Straight Inlet Liner 4mm. Straight Inlet Liner with Wool, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Single Baffle CIS4/TDU Inlet Liner 2.0 mm. Single Baffle CIS4/TDU Inlet Liner with Wool, for Agilent GCs equipped with CIS4/PTV inlets, Geometry: Straight, Length: 78 mm, OD: 3.0 mm, Liner ID: 2.0 mm, Deactivation: Topaz Technology, Material: Borosilicate

Single Baffle CIS4/TDU Inlet Liner 2.0 mm. Single Baffle CIS4/TDU Inlet Liner, for Agilent GCs equipped with CIS4/PTV inlets, Geometry: Straight, Length: 78 mm, OD: 3.0 mm, Liner ID: 2.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, In

Baffled CIS4/TDU Inlet Liner 2.0 mm. Baffled CIS4/TDU Inlet Liner, for Agilent GCs equipped with CIS4/PTV inlets, Geometry: Baffled, Length: 78 mm, OD: 3.0 mm, Liner ID: 2.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accura

Drilled Uniliner Inlet Liner 2.0 mm. Drilled Uniliner Inlet Liner with Hole near Top, for PerkinElmer GCs equipped with PSS Inlet, Length: 86.2 mm, OD: 4.0 mm, Material: Borosilicate GlassLiner ID: 2.0 mm, Increase accuracy and precision, Ensure liner-to-

Straight Inlet Liner 0.80 mm. Straight Inlet Liner, for Bruker/Varian GCs equipped with SPI inlets, Length: 54mm, OD: 4.6mm, Liner ID: 0.80 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-

Straight Inlet Liner 0.53 mm. Straight Inlet Liner, for Bruker/Varian GCs equipped with SPI inlets, Length: 54mm, OD: 4.6mm, Liner ID: 0.53 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-

Straight Inlet Liner 0.75 mm. Straight Inlet Liner, for Bruker/Varian GCs equipped with 1078/1079 inlets, Length: 54mm, OD: 5.0mm, Liner ID: 0.75 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure lin

Straight/SPME Inlet Liner 0.75 mm. Straight/SPME Inlet Liner, for Agilent GCs equipped with split/splitless inlets, Length: 78.5 mm, OD: 6.35 mm, Liner ID: 0.75 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision, Ensure liner-to-liner reproducibility

Straight/SPME Inlet Liner 1.8 mm. Straight/SPME Inlet Liner, for Agilent GCs equipped with split/splitless inlets, Geometry: Straight/SPME, Length: 78.5 mm, OD: 6.5 mm, Liner ID: 1.8 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increa

Straight/SPME Inlet Liner 1.8 mm. Straight/SPME Inlet Liner, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Geometry: Straight/SPME, Length: 95 mm, OD: 5.0 mm, Liner ID: 1.8 mm, Deactivation: Topaz Technology, Material: Borosil

Straight/SPME Inlet Liner 1.8 mm. Straight/SPME Inlet Liner for Thermo TRACE 1300/1310 GCs equipped with SSL inlets, Geometry: Straight/SPME, Length: 78.5 mm, OD: 6.5 mm, Liner ID: 1.8 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Incr

Precision Inlet Liner 3.4mm. Precision Inlet Liner with Top Taper with Wool, for Bruker/Varian GCs equipped with 1078/1079 inlet, Length: 54mm, OD: 5mm, Liner ID: 3.4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy, prec

Precision Inlet Liner 4.0 mm. Precision Inlet Liner with Wool, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets, Length: 92.1mm, OD: 6.2 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision

Straight Inlet Liner 1.0 mm. Straight Inlet Liner, for Thermo TRACE GCs equipped with PTV inlets, Length: 78.5 mm, OD: 6.3 mm, Liner ID: 1.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to

Straight Inlet Liner 1.0 mm. Straight Inlet Liner, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 1.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Top Taper Inlet Liner 3.4 mm. Top Taper Inlet Liner, for Bruker/Varian GCs equipped with 1078/1079 inlets, Length: 54mm, OD: 5 mm, Liner ID: 3.4 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure line

Precision Inlet Liner 4mm. Precision Inlet Liner with Wool, for Bruker/Varian GCs equipped with 1177 inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Precision Inlet Liner 5mm. Precision Inlet Liner with Wool, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Length: 105mm, OD: 8mm, Liner ID: 5mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy, Ensure liner-to-liner reproducibility

Precision Inlet Liner 3.5 mm. Precision Inlet Liner with Wool, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5.0 mm, Liner ID: 3.5 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase ac

Straight Inlet Liner 3.5 mm. Straight Inlet Liner with wool, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5mm, Liner ID: 3.5 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy, Ensure liner-to-liner reproducibility

Straight Inlet Liner 3.5 mm. Straight Inlet Liner, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5.0mm, Liner ID: 3.5mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & preci

Precision Inlet Liner 4mm. Precision Inlet Liner with Wool, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision, Ensure liner-to-liner reproducibility

Straight Inlet Liner 2.2 mm. Straight Inlet Liner with Wool, For DANI GCs, Length: 55mm, OD: 4.0 mm, Liner ID: 2.2 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Straight Inlet Liner 2.2 mm. Straight Inlet Liner with Wool, For DANI GCs with ferrule set, Length: 55mm, OD: 4.0 mm, Liner ID: 2.2 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner re

Uniliner Inlet Liner 3.5 mm. Uniliner Inlet Liner with Wool, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5 mm, Liner ID: 3.5 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accura

Straight Inlet Liner 4.0 mm. Straight Inlet Liner with Wool, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets, Length: 92.1mm, OD: 6.2 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase

Analytical Controls TPI Inlet Liner 2.4 mm. Columns, for Agilent GCs equipped with PTV inlets, Geometry: Straight, Liner ID: 2.4 mm, Length: 71 mm, OD: 4mm, Liner ID: 2.4 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy,

Straight Inlet Liner 2.0 mm. Straight Inlet Liner, For DANI GCs, Geometry:Straight, Length: 70mm, OD: 6.0 mm, Liner ID: 2.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducib

Straight Inlet Liner 4.0 mm. Straight Inlet Liner with Wool, For DANI GCs with ferrule set, Length: 70mm, OD: 6.0 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner re

Straight Inlet Liner 3.0 mm. Straight Inlet Liner, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Length: 105 mm, OD: 8 mm, Liner ID: 3.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precisio

On-Column Inlet Liner 1.7 mm. On-Column Inlet Liner, for Agilent GCs equipped with CIS4/PTV inlets, Length: 71 mm, OD: 3 mm, Liner ID: 1.7 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-l

Frit Inlet Liner 4.0 mm. Frit Inlet Liner, for Bruker/Varian GCs equipped with 1177 inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Straight Inlet Liner 5.0 mm. Straight Inlet Liner, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Length: 105mm, OD: 8.0 mm, Liner ID: 5.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precisi

Straight Inlet Liner 2mm. Straight Inlet Liner with Wool, for PerkinElmer GCs equipped with PSS Inlet Split/Splitless, Length: 86.2mm, OD: 4mm, Liner ID: 2mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision, Ens

Cyclo Inlet Liner 4.0 mm. Cyclo Inlet Liner, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Drilled Uniliner Inlet Liner 4.0 mm. Drilled Uniliner Inlet Liner with Hole near Top, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision

Cyclo Double Taper Gooseneck Inlet Liner 4.0 mm. Cyclo Double Taper Gooseneck Inlet Liner, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision

Analytical Controls TPI Inlet Liner 2.4 mm. Columns, for Agilent GCs equipped with PTV inlets, Geometry: Straight, Liner ID: 2.4 mm, Length: 71 mm, OD: 4mm, Liner ID: 2.4 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy,

Straight Inlet Liner 4.0 mm. Straight Inlet Liner with Wool, For DANI GCs, Length: 70mm, OD: 6.0 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Straight Inlet Liner 4.0 mm. Straight Inlet Liner, For DANI GCs, Geometry:Straight, Length: 70mm, OD: 6.0 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducib

Top Taper Inlet Liner 2.0 mm. Top Taper Inlet Liner, for Bruker/Varian GCs equipped with 1078/1079 inlets, Length: 54mm, OD: 5.0mm, Liner ID: 2.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure lin

Straight Inlet Liner 4.0 mm. Straight Inlet Liner with Wool, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets, Length: 92.1mm, OD: 6.2 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase

Single Taper Inlet Liner 4mm. Single Taper Inlet Liner with wool, for Thermo TRACE 1300/1310 GCs equipped with SSL inlets, Length: 78.5mm, OD: 6.5mm, Liner ID: 4.0mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision, Ensure liner-to-liner reproducibility

Single Taper Inlet Liner 4mm. Single Taper Inlet Liner, for Thermo TRACE 1300/1310 GCs equipped with SSL inlets, Length: 78.5 mm, OD: 6.5 mm, Liner ID: 4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision, Ensur

Straight Inlet Liner 4.0 mm. Straight Inlet Liner, for Thermo TRACE 1300/1310 GCs equipped with SSL inlets, Length: 78.5 mm, OD: 6.3 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensur

Precision Inlet Liner 5.0 mm. Precision Inlet Liner with Single Taper with Wool, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Length: 105 mm, OD: 8 mm, Liner ID: 5.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass

Single Taper Inlet Liner 3.0 mm. Single Taper Inlet Liner, with wool, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Length: 105 mm, OD: 8 mm, Liner ID: 3.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision

Single Taper Inlet Liner 3mm. Single Taper Inlet Liner, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Length: 105mm, OD: 8mm, Liner ID: 3.0mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precis

Straight Inlet Liner 2 mm. Straight Inlet Liner, for Thermo TRACE GCs equipped with PTV inlets, Length: 120 mm, OD: 2.75 mm, Liner ID: 2 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-lin

Straight Inlet Liner 1.0 mm. Straight Inlet Liner, for Thermo TRACE GCs equipped with PTV inlets, Length: 120 mm, OD: 2.75 mm, Liner ID: 1.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to

Single Taper Inlet Liner 3.5 mm. Single Taper Inlet Liner with Wool, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5.0 mm, Liner ID: 3.5 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision

Single Taper Gooseneck Inlet Liner 4.0 mm. Single Taper Gooseneck Inlet Liner with wool, for Bruker/Varian GCs equipped with 1177 inlets, Length: 78.5mm, OD: 6.5 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase

Single Taper Gooseneck Inlet Liner 4mm. Single Taper Gooseneck Inlet Liner, for Bruker/Varian GCs equipped with 1177 inlets, Length: 78.5mm, OD: 6.5mm, Liner ID: 4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision, Ensure liner-to-liner reproducibility

Single Taper Inlet Liner 5.0 mm. Single Taper Inlet Liner with wool, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Length: 105mm, OD: 8.0 mm, Liner ID: 5.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision

Single Taper Inlet Liner 5mm. Single Taper Inlet Liner, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets, Length: 105mm, OD: 8.0mm, Liner ID: 5mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision, Ensure liner-to-liner reproducibility

Single Taper Gooseneck Inlet Liner 3.5 mm. Single Taper Gooseneck Inlet Liner, with wool, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5.0mm, Liner ID: 3.5mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision

Single Taper Gooseneck Inlet Liner 3.5 mm. Single Taper Gooseneck Inlet Liner, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5mm, Liner ID: 3.5 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass

Single Taper Gooseneck Inlet Liner 4.0 mm. Single Taper Gooseneck Inlet Liner with wool, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.5 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision

Single Taper Gooseneck Inlet Liner 4mm. Single Taper Gooseneck Inlet Liner, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.5 mm, Liner ID: 4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy, E

Straight Inlet Liner 2mm. Straight Inlet Liner with wool, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.5 mm, Liner ID: 2mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensur

Straight Inlet Liner 2.0 mm. Straight Inlet Liner, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.5 mm, Liner ID: 2.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Single Taper Inlet Liner 4mm. Single Taper Inlet Liner with Wool, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.5 mm, Liner ID: 4mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision, Ensure liner-to-liner reproducibility

Single Taper Inlet Liner 4.0 mm. Single Taper Inlet Liner, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.5 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Straight Inlet Liner 4.0 mm. Straight Inlet Liner, for Agilent GCs equipped with split/splitless inlets, Length: 78.5mm, OD: 6.3 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Straight Inlet Liner 1.6 mm. Straight Inlet Liner with Wool, for Shimadzu 17A GCs equipped with PTV inlets, Length: 95 mm, OD: 4.0 mm, Liner ID: 1.6 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure

Baffled Inlet Liner 1.5 mm. Baffled Inlet Liner, for Agilent GCs equipped with CIS4/PTV inlets, Geometry: Baffled, Liner ID: 1.5mm, Length: 71mm, OD: 3mm, Liner ID: 1.5mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy, En

Baffled Inlet Liner 1.0 mm. Baffled Inlet Liner, for Thermo TRACE GCs equipped with PTV inlets, Length: 120 mm, OD: 2.75 mm, Liner ID: 1.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibility

Double Taper Inlet Liner 3.5 mm. Double Taper Inlet Liner, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5mm, Liner ID: 3.5mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy,

Single Taper Precision Inlet Liner 3.5 mm. Single Taper Precision Inlet Liner with Wool, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets, Length: 95mm, OD: 5mm, Liner ID: 3.5 mm, Deactivation: Topaz Technology, Material: Borosili

Single Baffle Inlet Liner 2mm. Single Baffle Inlet Liner with Wool, for Agilent GCs equipped with CIS4/PTV inlets, Geometry: Straight, Length: 71 mm, OD: 3mm, Liner ID: 2mm, Deactivation: Topaz Technology, Packing: Quartz Wool, Material: Borosilicate Glass, Increase accuracy & precision

Single Baffle Inlet Liner 2mm. Single Baffle Inlet Liner, for Agilent GCs equipped with CIS4/PTV inlets, Geometry: Straight, Length: 71mm, OD: 3.0mm, Liner ID: 2.0mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy & precision, Ensure liner-to-liner reproducibility

Single Taper Inlet Liner 4.0 mm. Single Taper Inlet Liner with Wool, For DANI GCs, Length: 70mm, OD: 6.0 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner reproducibi

Straight Inlet Liner 4.0 mm. Straight Inlet Liner with Wool, For DANI GCs with ferrule set, Length: 70mm, OD: 6.0 mm, Liner ID: 4.0 mm, Deactivation: Topaz Technology, Material: Borosilicate Glass, Increase accuracy and precision, Ensure liner-to-liner re

Force FluoroPhenyl Column (USP L43) 3um. Force FluoroPhenyl Column (USP L43) 3um, Pore Size: 100 A, Capable of both reversed-phase and HILIC separations, Offers increased retention for charged bases, Similar Phase(s): Acquity UPLC HSS PFP, Application: LC-MS analyses, Dimension: 150 x 2.1mm

Force FluoroPhenyl Column (USP L43) 3um. Force FluoroPhenyl Column (USP L43) 3um, Pore Size: 100 A, Capable of both reversed-phase and HILIC separations, Offers increased retention for charged bases, Similar Phase(s): Acquity UPLC HSS PFP, Application: LC-MS analyses, Dimension: 50 x 2.1mm

Force FluoroPhenyl Column (USP L43) 1.8um. Force FluoroPhenyl Column (USP L43) 1.8um, Pore Size: 100 A, Capable of both reversed-phase and HILIC separations, Offers increased retention for charged bases, Similar Phase(s): Acquity UPLC HSS PFP, Application: LC-MS analyses, Dimension: 100 x 2.1mm

Force EXP Guard Column Cartridge, Pore Size: 100 A, Limits ionization suppression and allows simple, MS-friendly mobile phases, Similar Phase(s): Unique, Application: bioanalytical testing like drug and metabolite analyses, Dimension: 5 x 2.1mm

Force BiPhenyl LC Column (USP L11) 3um. Force BiPhenyl LC Column (USP L11) 3um, Pore Size: 100 A, Limits ionization suppression and allows simple, MS-friendly mobile phases, Similar Phase(s): Unique, Application: bioanalytical testing like drug and metabolite analyses, Dimension: 150 x 2.1mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 150 x 3.0mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 150 x 4.6mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 150 x 2.1mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 50 x 3.0mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 50 x 4.6mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 50 x 2.1mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 30 x 3.0mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 30 x 4.6mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 30 x 2.1mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 100 x 3.0mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 100 x 4.6mm

Raptor FluoroPhenyl LC Column (USP L43) 2.7um. Raptor FluoroPhenyl LC Column (USP L43) 2.7um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 100 x 2.1mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase(s): Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 250 x 4.6mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase(s): Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 150 x 3.0mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase(s): Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 150 x 4.6mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase(s): Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 150 x 2.1mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase(s): Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 50 x 3.0mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase(s): Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 50 x 4.6mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase(s): Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 50 x 2.1mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase(s): Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 30 x 3.0mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase(s): Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 100 x 3.0mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase(s): Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 100 x 4.6mm

Raptor FluoroPhenyl LC Column (USP L43) 5um. Raptor FluoroPhenyl LC Column (USP L43) 5um, Pore Size: 90 A, Capable of both reversed-phase and HILIC separations, Similar Phase: Kinetix PFP, Halo 2.7 PFP, Application: Increasing sensitivity, Selectivity in LC-MS analyses, Dimension: 100 x 2.1mm

Stabilwax capillary Column 0.25um. Stabilwax capillary Column, (fused silica), polar phase; Crossbond polyethylene glycol, Temperature Limits: 40 to 250/260 deg C, Length: 30M, ID: 0.53Mm, Particle Size: 0.25um, with 5M integraguard, Equivalent to USP G14, G15, G16, G20, and G39 phases

Rtx-35 Capillary Column 1.50um. Rtx-35 Capillary Column, fused silica, midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, Temp Limits: 40 to 320 deg C, Length: 30m, ID: 0.32mm, Particle Size: 1.50um, Similar Phase(s): HP-35, DB-35, ZB-35, Equivalent to USP G42 phase, for PCB congeners

Rtx-35 Capillary Column 1.00um. Rtx-35 Capillary Column, fused silica, midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, Temp Limits: 40 to 320 deg C, Length: 30m, ID: 0.53mm, Particle Size: 1.00um, Similar Phase(s): HP-35, DB-35, ZB-35, Equivalent to USP G42 phase, for PCB congeners

Rtx-1701 Capillary column 0.25um. Rtx-1701 Capillary column, Fused Silica, midpolarity Crossbond phase, Temp Limits:-20 to 260/280 Deg C, Length: 30m, ID: 0.32mm, Particle Size: 0.25um, Similar Phase(s): DB-1701P, DB-1701, CP-Sil 19 CB, VF-1701ms, VF-1701 Pesticides, ZB-1701, ZB-1701P

Rtx-1301 (G43) Capillary Column 1.50um. Rtx-1301 (G43) Capillary Column, fused silica, low- to midpolarity phase, Temp Limits:-20 to 240 deg C, Length: 30m, ID: 0.32MM, Particle Size: 1.50um, Similar Phase(s): DB-1301, DB-624, DB-624UI, VF-1301ms, VF-624ms, CP-1301, ZB-624, for residual solvents

Rtx-1 Column (fused silica)0.50 um. Rtx-1 Column (fused silica), Length: 30 m, ID: 0.25 mm, Particle Size: 0.50 um, Modification: with 5m integra guard, Temperature range: -60 to 330/350 deg C, nonpolar phase; Crossbond dimethyl polysiloxane, low bleed, Equivalent to: USP G1, G2, G38 phases

Porous Polymer packed Column 2 m. Porous Polymer packed Column, Porapak R, Length: 2 m, ID: 2.0 mm, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: Agilent 5880, 5890, 5987, 6890, 7890, Applications: for analyses of volatile components and light solvents

Molecular sieve packed Column 6 ft. Molecular sieve packed Column, Molesieve 13X, Length: 6 ft, ID: 2.1 mm, OD: 1/8in, Material: Stainless Steel Tubing, Mesh: 80/100, Configuration: ABB 3100, AAI (4in coil)(Void), separate permanent gas at above-ambient temperatures, batch-to-batch reproducibility

Molecular Sieve Column 2m. Molecular Sieve Column, Molesieve 13X, Material: SilcoSmooth Tubing, Mesh: 80/100, Column configuration: Silco varian, Easily separate permanent gases at above-ambient temperatures, With metal end-fitting to prevent water or Co2 from adsorbing, ID: 1/8in, Length: 2m

Molecular Sieve Column 6ft. Molecular Sieve Column, Molesieve 13X, Material: Stainless Steel Tubing, Mesh: 80/100, Column Configuration: Noc precond, Easily separate permanent gases at above-ambient temperatures, With metal end-fitting to prevent water and Co2 from adsorbing, ID: 2mm, Length: 6ft

STX-CLP column, Inner dimension: 0.32mm, 11544/11444 /10027.

Stabilwax Column 0.50um. Stabilwax Column (Fused silica), Polar phase, Low-bleed Crossbond polyethylene glycol, Temperature range: 40 to 230/240 deg C, Length: 60m, ID: 0.32 mm, DF: 0.50um, USP G14/G15/G16/G20/G39 phase, Withstand repeated water injections, Similar Phases: HP-INNOWax, CP-Wax 52 CB

Rtx-5MS Column 1um. Rtx-5MS Column (Fused silica), Low polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature: -60 to 320/340deg C, Length: 15m, ID: 0.53mm, DF: 1um, USP G27/G36 phase, For drugs, solvent impurities, pesticides, hydrocarbons, Similar Phases: DB-5, HP-5, HP-5MS, Ultra-2

Rtx-5MS Column 1.50um. Rtx-5MS Column (Fused silica), Low polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature: -60 to 310/330 deg C, Low-bleed, Length: 15m, ID: 0.53 mm, DF: 1.50um

Stabilwax Column 0.50um. Stabilwax Column(Fused silica), Polar phase, Low-bleed Crossbond polyethylene glycol, Temperature range: 40-250/260deg C, Length: 30m, ID: 0.32mm, DF: 0.50um, USP G14/G15/G16/G20/G39 phase, Withstand repeated H2O injection, Similar Phases: HP-INNOWax, CP-Wax 52 CB, VF-WAX MS

Rtx-1301 (G43) Column 1.00 um. Rtx-1301 (G43) Column (fused silica) low- to midpolarity phase, Temperature: -20 to 260 deg C, Similar To: Agilent 122-1336, Length: 30 m, Internal Diameter: 0.25 mm, Particle Size: 1.00 um with 10m IntegraGuard, Equivalent to USP G43 phase, Similar Phase(s): DB-1301

Rtx-1 Column 1.50 um. Rtx-1 Column (fused silica) nonpolar phase, Crossbond dimethyl polysiloxane, Temperature Limits: -60 to 310/330 deg C, Length: 60 m, Internal Diameter: 0.53 mm, Particle Size: 1.50 um, Similar Phase(s): HP-1, DB-1, CP-Sil 5 CB, ZB-1, with 10m IntegraGuard, Equivalent to USP G1

Rtx-1301 (G43) Column 3.00 um. Rtx-1301 (G43) Column (fused silica) low- to midpolarity phase, Temperature: -20 to 240 deg C, Length: 30 m, Internal Diameter: 0.53 mm, Particle Size: 3.00 um with 10m IntegraGuard, Equivalent to USP G43 phase, Similar Phase(s): DB-1301, DB-624, DB-624UI, VF-1301ms

Stabilwax Column 0.50 um. Stabilwax Column (fused silica) polar phase, Crossbond polyethylene glycol, Temperature Limits: 40 to 250/260 deg C, Similar To: Grace 14111, 5122051, Length: 30 m, Internal Diameter: 0.53 mm, Particle Size : 0.50 um, with 10m IntegraGuard, Similar Phase(s): HP-INNOWax

DiatoSorb Diatomaceous Earth Column 10% Rtx-Stabilwax, Bonded Phase on 100/120 Silcoport W, Packed Stainless Steel Tubing Column are made from high-quality weldrawn tubing, length: 6 ft, Outer diameter: 1/8 in, Internal Diameter: 2.0 mm, HP

Rtx-5 (G27) Column 1.50 um. Rtx-5 (G27) Column (fused silica), low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Limits: -60 to 310/330 deg C, Length: 15 m, Internal Diameter: 0.53mm, Particle size: 1.50 um, with 5 m Integra-Guard Column, Similar Phase(s): HP-5, DB-5, ZB-5

Rtx-5 (G27) Column 1.50 um. Rtx-5 (G27) Column (fused silica), low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Limits: -60 to 310/330 deg C, Length: 15 m, Internal Diameter: 0.32mm, Particle size: 1.50 um, with 5 m Integra-Guard Column, Similar Phase(s): HP-5, DB-5, ZB-5

Rtx-5 (G27) Column 1.00 um. Rtx-5 (G27) Column (fused silica), low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Limits: -60 to 325/350 deg C, Length: 15 m, Internal Diameter: 0.32mm, Particle size: 1.00 um, with 5 m Integra-Guard Column, Similar Phase(s): HP-5, DB-5, ZB-5

CarboBlack packed Column 5% Carbowax 20M. CarboBlack packed Column, 5% Carbowax 20M, Length: 2 m, ID: 2.0 mm, Material: SilcoSmooth Tubing, Mesh: 80/120, Column configuration: General, unique selectivity and very little adsorption for alcohol analyses, supports provide resolution and retention

Column Assembly, 30mm Lx2.1mmIDx1/4inOD, Pore size: 100A, Ideal for a wide range of applications from food to pharma; 5 phases cover 98% of USP methods, Solid and reliable for any 400 bar HPLC system

Standard 515.4 Methylated Chlorinated Acids Mix, Pesticide Stock Mixture, Volume: 1mL MTBE.

Standard Herbicide mix Dicamba 1ml/ampule. Standard Herbicide mix Dicamba, Cas number: 1918-00-9, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 month, Volume: 1ml/ampule

Standard 2,4,5-TP (Silvex) methyl ester 1ml/ampule. Standard 2,4,5-TP (Silvex) methyl ester, Cas number: 4841-20-7, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Herbicide mix 2,4,5-TP (Silvex) 1ml/ampule. Standard Herbicide mix 2,4,5-TP (Silvex), Cas number: 93-72-1, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 month, Volume: 1ml/ampule

Standard Herbicide mix 2,4-DB 1ml/ampule. Standard Herbicide mix 2,4-DB, Cas number: 94-82-6, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 month, Volume: 1ml/ampule

Standard Herbicide mix 2,4-D methyl ester 1ml/ampule. Standard Herbicide mix 2,4-D methyl ester, Cas number: 1928-38-7, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 month, Volume: 1ml/ampule

Standard Herbicide mix 2,4-D (2,4-dichlorophenoxyacetic acid) 1ml/ampule. Standard Herbicide mix 2,4-D (2,4-dichlorophenoxyacetic acid), Cas number: 94-75-7, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 month, Volume: 1ml/ampule

Standard Pesticide mix Trifluralin 1ml/ampule. Standard Pesticide mix Trifluralin, Cas number: 1582-09-8, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix Simazine 1ml/ampule. Standard Pesticide mix Simazine, Cas number: 122-34-9, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix Propachlor 1ml/ampule. Standard Pesticide mix Propachlor, Cas number: 1918-16-7, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix Methoxychlor 1ml/ampule. Standard Pesticide mix Methoxychlor, Cas number: 72-43-5, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Hexachlorocyclopentadiene 1ml/ampule. Standard Hexachlorocyclopentadiene, Cas number: 77-47-4, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix Heptachlor epoxide 1ml/ampule. Standard Pesticide mix Heptachlor epoxide, Isomer B, Cas number: 1024-57-3, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix Heptachlor 1ml/ampule. Standard Pesticide mix Heptachlor, Cas number: 76-44-8, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix trans-Chlordane 1ml/ampule. Standard Pesticide mix trans-Chlordane, Cas number: 5103-74-2, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix g-BHC 1ml/ampule. Standard Pesticide mix g-BHC, Lindane, Cas number: 58-89-9, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix d-BHC 1ml/ampule. Standard Pesticide mix d-BHC, Cas number: 319-86-8, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix Chlorpyrifos 1ml/ampule. Standard Pesticide mix Chlorpyrifos, Cas number: 2921-88-2, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix b-BHC 1ml/ampule. Standard Pesticide mix b-BHC, Cas number: 319-85-7, Concentration: 1,000 ug/mL in acetone, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix Atrazine 1ml/ampule. Standard Pesticide mix Atrazine, Cas number: 1912-24-9, Concentration: 1,000 ug/mL in acetone, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix cis-Chlordane 1ml/ampule. Standard Pesticide mix cis-Chlordane, Cas number: 5103-71-9, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Stearyl stearate 100mg. Standard Stearyl stearate, Cas number: 2778-96-3, Concentration in solvent: Neat, Minimum shelf life: 6month, Volume: 100 mg

Standard n-Tetracontane (C40) 100 mg. Standard n-Tetracontane (C40), CAS number: 4181-95-7, Concentration: Neat, Minimum shelf life: 6 months, Volume: 100 mg

Standard n-Decane (C10) 1 mL/ampul. Standard n-Decane (C10), CAS number: 124-18-5, Concentration: Neat, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Internal Standard 4,4'-Dibromooctafluorobiphenyl 515.4 1 mL/ampul. Internal Standard 4,4'-Dibromooctafluorobiphenyl 515.4, CAS number: 10386-84-2, Concentration: 2,000 ug/mL in methyl tert-butyl ether, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Surrogate Standard 551.1 Decafluorobiphenyl 1 mL/ampul. Surrogate Standard 551.1 Decafluorobiphenyl, CAS number: 434-90-2, Concentration: 1,000 ug/mL in acetone, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Benzidines Mix 8270 3 components 1mL/ampul. Standard Benzidines Mix 8270, Concentration: 2000ug/mL each in methylene chloride, Components: Benzidine (92-87-5), 3,3'-Dichlorobenzidine (91-94-1), 3,3'-Dimethylbenzidine (o-tolidine) (119-93-7), Minimum shelf life: 6 months, Volume: 1mL/ampul

Surrogate Standard 8061A 3 components 1 mL/ampul. Surrogate Standard 8061A 3 components, Concentration: 500 ug/mL each in acetone, Minimum half life: 6 months, Components: Dibenzyl phthalate (523-31-9), Diphenyl isophthalate (744-45-6), Diphenyl phthalate (84-62-8), Volume: 1 mL/ampul

Standard Benzyl Benzoate (Internal) 1 mL/ampul. Standard Benzyl Benzoate (Internal), CAS number: 120-51-4, Concentration: 5,000 ug/mL in hexane, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard 506 Calibration Mix 7 components 1 mL/ampul. Standard 506 Calibration Mix, Concentration: 1,000 ug/mL in isooctane, Components: Benzyl butyl phthalate, Bis(2-ethylhexyl)adipate, Bis(2-ethylhexyl)phthalate, Diethylphthalate, Dimethylphthalate, Di-n-octyl phthalate, Volume: 1 mL/ampul

Standard Quality Control Check EPA Method 8310 1 mL/ampul. Standard Quality Control Check EPA Method 8310, 18 components, SV Stock, Solvent: In acetonitrile, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Surrogate Standard EPA Method 8310 Decafluorobiphenyl 1 mL/ampul. Surrogate Standard EPA Method 8310 Decafluorobiphenyl, CAS number: 434-90-2, Concentration: 1,000 ug/mL in acetonitrile, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Calibration Standard ASTM D2887-12 1 g/ampul. Calibration Standard ASTM D2887-12, 20 components, Concentration: 1% w/w in carbon disulfide, for column resolution text mixture, calibration mixture for RT versus boiling point (bp) calibration, Minimum Shelf life: 6 months, Volume: 1 g solution/ampul

Standard UST stock solution n-Octacosane (C28) 1 mL/ampul. Standard UST stock solution n-Octacosane (C28), CH2CL2, CAS number: 630-02-4, Concentration: 10,000 ug/mL in methylene chloride, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard 1,3,5-Trinitrobenzene 1 mL/ampul. Standard 1,3,5-Trinitrobenzene, Single-Component Explosives Solution, CAS number: 99-35-4, Concentration: 1,000 ug/mL in acetonitrile, Minimum shelf life: 6 months, Support nitroaromatic, nitramine and nitroester analyses by GC-ECD, Volume: 1 mL/ampul

Standard Tetryl Single-Component Explosives Solution 1 mL/ampul. Standard Tetryl Single-Component Explosives Solution, CAS number: 479-45-8, Concentration: 1,000 ug/mL in acetonitrile, Minimum shelf life: 6 months, Support nitroaromatic, and nitroester analyses by GC-ECD, Volume: 1 mL/ampul

Standard RDX Single-Component Explosives Solution 1 mL/ampul. Standard RDX Single-Component Explosives Solution, CAS: 121-82-4, Concentration: 1,000 ug/mL in acetonitrile, Minimum shelf life: 6 months, Support nitroaromatic, and nitroester analyses by GC-ECD, EPA Method 8330, Volume: 1 mL/ampul

Standard HMX Single-Component Explosives Solution 1 mL/ampul. Standard HMX, Single-Component Explosives Solution, CAS: 2691-41-0, Concentration: 1,000 ug/mL in acetonitrile, Minimum shelf life: 6 months, Support nitroaromatic, and nitroester analyses by GC-ECD, EPA Method 8330, Volume: 1 mL/ampul

Standard 2,6-Dinitrotoluene 1 mL/ampul. Standard 2,6-Dinitrotoluene, Single-Component Explosives Solution, CAS number: 606-20-2, Concentration: 1,000 ug/mL in acetonitrile, Minimum shelf life: 6 months, Support nitramine, and nitroester analyses by GC-ECD, LC U.S. EPA Method 8330, Volume: 1mL/ampul

Standard 2,4-Dinitrotoluene 1 mL/ampul. Standard 2,4-Dinitrotoluene, Single-Component Explosives Solution, CAS number: 121-14-2, Concentration: 1,000 ug/mL in acetonitrile, Minimum shelf life: 6 months, Support nitramine, and nitroester analyses by GC-ECD, LC U.S. EPA Method 8330, Volume: 1 mL/ampul

Standard 3,5-Dinitroaniline 1 mL/ampul. Standard 3,5-Dinitroaniline, Single-Component Explosives Solution, CAS number: 618-87-1, Concentration: 1,000 ug/mL in acetonitrile, Minimum shelf life: 6 months, Support nitramine, and nitroester analyses by GC-ECD, LC U.S. EPA Method 8330, Volume: 1 mL/ampul

Methyl-2,3-dibromopropionate Surrogate Standard 1 mL/ampul. Methyl-2,3-dibromopropionate Surrogate Standard, CAS number: 1729-67-5, Concentration: 1,000 ug/mL in methyl tert-butyl ether, Minimum shelf life: 6 months, for Method 552.2, Volume: 1 mL/ampul

2,3-Dibromopropionic acid Surrogate Standard 1 mL/ampul. 2,3-Dibromopropionic acid Surrogate Standard, CAS number: 600-05-5, Concentration: 1,000 ug/mL in methyl tert-butyl ether, Minimum shelf life: 6 months, for Method 552.2, Volume: 1 mL/ampul

2-Bromopropionic acid Surrogate Standard 1 mL/ampul. 2-Bromopropionic acid Surrogate Standard, CAS number: 598-72-1, Concentration: 1,000 ug/mL in methyl tert-butyl ether, Minimum shelf life: 6 months, for Method 552.2, Volume: 1 mL/ampul

2,3-Dichloropropionic acid Surrogate Standard 1 mL/ampul. 2,3-Dichloropropionic acid Surrogate Standard, CAS number: 565-64-0, Concentration: 1,000 ug/mL in methyl tert-butyl ether, Minimum shelf life: 6 months, for Method 552, 552.1, Volume: 1 mL/ampul

1,2,3-Trichloropropane Internal Standard 1 mL/ampul. 1,2,3-Trichloropropane Internal Standard, CAS number: 96-18-4, Concentration: 1,000 ug/mL in methyl tert-butyl ether, Minimum shelf life: 6 months, for Method 552, Volume: 1 mL/ampul

Standard Haloacetic Acid Mix No. 2 9 components 1 mL/ampul. Standard Haloacetic Acid Mix No. 2, Solvent: Methyl tert-butyl ether, 9 components, Meets US EPA Methods 552, 552.1 and 552.2, Stage 2 DBPR, For neat reference material highest quality, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Haloacetic Acid Methyl Ester Mix No. 1 1 mL/ampul. Standard Haloacetic Acid Methyl Ester Mix No. 1, Concentration: 1,000 ug/mL each in methyl tert-butyl ether, 6 components, meets US EPA Methods 552, 552.1 and 552.2, Stage 2 DBPR, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standars Haloacetic Acid Mix No. 1 1mL/ampul. Standars Haloacetic Acid Mix No. 1, Concentration: 2000ug/mL each in methyl tert-butyl ether, Compounds: Bromochloroacetic acid, Dibromoacetic acid, Dichloroacetic acid, Monobromoacetic acid, Monochloroacetic acid, Trichloroacetic acid, Volume: 1mL/ampul

Standard Mixture Quality Control Revised 1 mL/ampul. Standard Mixture Quality Control Revised, Concentration: 500 ug/mL each in acetone, Compounds: Diesel No. 2 (additive-free), Motor oil (additive-free bp 325 - 460 or C18 - C32 retention time range), Minimum shelf life: 6 months, Volume: 1mL/ampul

Standard Alternate Boiling Point/Carbon Number Distribution Marker Stock 1 mL/ampul. Standard Alternate Boiling Point/Carbon Number Distribution Marker Stock, 9 components, Concentration: 200 ug/mL each in pentane, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Mixture Quality Control 1 mL/ampul. Standard Mixture Quality Control, Concentration: 500 ug/mL each in acetone, Components: Diesel No. 2 (additive-free), Mineral oil (additive-free, USP grade, bp 391-522), For GC analysis of TPH in water, Minimum shelf Life: 6 months, Volume: 1 mL/ampul

Standard Mixture Stock Solution 1 mL/ampul. Standard Mixture Stock Solution, Concentration: 5,000 ug/mL each in cyclohexane, Components: Diesel No. 2 (additive-free), Mineral oil (additive-free, USP grade, bp 325-460), For GC analysis of total petroleum hydrocarbons in water, Volume: 1 mL/ampul

Standard Calibration Mix ASTM D6042-96 1 mL/ampul. Standard Calibration Mix ASTM D6042-96, with antioxidants, Concentration: 50ug/mL each in isopropanol, Components: BHT, Erucamide slip, Vitamin E, Irgafos 168, Irganox 3114, Irganox 1010, Irganox 1076, Minimum shelf life: 6 months, Volume: 1mL/ampul

Standard Calibration Mix number 6 1 mL/ampul. Standard Calibration Mix number 6, Concentration: 2000 ug/mL each in methylene chloride, Compounds: Diallate, Dimethoate, Disulfoton, Famphur, Methyl parathion, Parathion, Phorate, Propyzamide, O,O,O-Triethyl phosphorothioate, Zinophos, Size: 1mL/ampul

Standard Calibration Mix number 4 8270 22 components 1 mL/ampul. Standard Calibration Mix number 4 8270, 22 components, Concentration: 2,000 ug/mL each in methylene chloride, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Acid Calibration Check Mix 8270 1 mL/ampul. Standard Acid Calibration Check Mix 8270, Concentration: 2,000 ug/mL each in methylene chloride, Components: 4-Chloro-3-methylphenol, 2,4-Dichlorophenol, 2-Nitrophenol, Pentachlorophenol, Phenol, 2,4,6-Trichlorophenol, Volume: 1 mL/ampul

Standard B/N Calibration Check Mix 8270 1 mL/ampul. Standard B/N Calibration Check Mix 8270, Concentration: 2,000 ug/mL each in methylene chloride, Compounds: Acenaphthene, Benzo(a)pyrene, 1,4-Dichlorobenzene, Di-n-octyl phthalate, Diphenylamine, Fluoranthene, Hexachlorobutadiene, Volume: 1 mL/ampul

Standard E1618 Test Mix (13 components) 1 mL/ampul. Standard E1618 Test Mix (13 components), Concentration: 0.05% volume/volume each in methylene chloride, are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Calibration Mix B 8095 1 mL/ampul. Standard Calibration Mix B, 8095, Concentration: 5,000 ug/mL each in acetonitrile, Compounds: 3,5-Dinitroaniline, Nitrobenzene, Nitroglycerin, 2-Nitrotoluene, 3-Nitrotoluene, 4-Nitrotoluene, PETN, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Calibration Mix A 8095 1 mL/ampul. Standard Calibration Mix A 8095 (10 components), Concentration: 1,000 ug/mL each in acetonitrile, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Nitroguanidine Single-Component Explosives Solution 1ml/ampul. Standard Nitroguanidine Single-Component Explosives Solution, Concentration: 1000ug/ml, Methanol, Volume: 1ml/ampul

Standard EGDN Single-Component Explosives Solution 1 mL/ampul. Standard EGDN (Single-Component Explosives Solution), CAS number: 628-96-6, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Picric Acid Single-Component Explosives Solution 1 mL/ampul. Standard Picric Acid (Single-Component Explosives Solution), CAS number: 88-89-1, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard 1,2-Diphenylhydrazine 1 mL/ampul. Standard 1,2-Diphenylhydrazine, CAS: 122-66-7, unstable compound that will oxidize to azobenzene, thereby decreasing the concentration For accurate calibration result, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 3 months, Volume: 1 mL/ampul

Standard Azobenzene 1 mL/ampul. Standard Azobenzene, CAS number: 103-33-3, Concentration: 1,000 ug/mL in methylene chloride, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard CLP 04.1 Phenols Calibration Mix 1 mL/ampul. CLP 04.1 Phenols Calibration Mix (14 components), Concentration: 2,000 ug/mL each in methylene chloride Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard CLP 04.1 BNA Surrogate Mix 1 mL/ampul. Standard CLP 04.1 BNA Surrogate Mix, Solvent: Methylene chloride, Compounds: 2-Chlorophenol-d4, 1,2-Dichlorobenzene-d4, 2-Fluorobiphenyl, 2-Fluorophenol, Nitrobenzene-d5, Phenol-d6, p-Terphenyl-d14, 2,4,6-Tribromophenol, Volume: 1 mL/ampul

Standard WA EPH Fractionation Check Mix 1 mL/ampul. Standard WA EPH Fractionation Check Mix, 22 components, Concentration: 25 ug/mL each in hexane, Minimum Shelf Life: 6 months, Volume: 1 mL/ampul

Standard WA EPH Aliphatic Hydrocarbon Mix 1 mL/ampul. WA EPH Aliphatic Hydrocarbon Mix, Concentration: 1,000 ug/mL each in hexane, Compounds: (C8) n-Octane, (C10) n-Decane, (C12) n-Dodecane, (C16) n-Hexadecane, (C21) n-Heneicosane, (C34) n-Tetratriacontane, Shelf life: 6 months, Volume: 1 mL/ampul

Standard WA EPH Aromatic Hydrocarbon Mix 1 mL/ampul. Standard WA EPH Aromatic Hydrocarbon Mix, Concentration: 1,000 ug/mL each in methylene chloride, Compounds: Acenaphthene, Benzo(ghi)perylene, Naphthalene, Pyrene, Toluene, 1,2,3-Trimethylbenzene, Minimum Shelf Life: 6 months, Volume: 1 mL/ampul

Standard SV Mix, Pentacosane, 1ml/Ampule. Standard SV Mix, Pentacosane (C25), Concentration: 10,000ug/ml,Methylene Chloride, CAS:629-99-2, Shelf Life: 6 Months, Storage: 25 deg C nominal, Volume: 1ml/Ampule

Standard SV Mix, Ust Method, Tx Tph Matrix Spike, 1ml/Ampule. Standard SV Mix, Ust Method, Tx Tph Matrix Spike, Concentration: 10,000ug/ml,Pt&M, Shelf Life: 6 Months, Storage: 10 deg C or colder, Volume: 1ml/Ampule

SV Mix, Ust Method, Tx Tph Calibration standard, 1ml/Ampule. SV Mix, Ust Method, Tx Tph Calibration standard, Concentration: 10,000ug/ml,Pentane, Shelf Life: 6 Months, Storage: 10 deg C or colder, Volume: 1ml/Ampule

Standard SV Mix, Phenol, 1ml/Ampule. Standard SV Mix, Phenol, Concentration: 1000Ug/ml in Methanol, CAS no: 108-95-2, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, 4-Nitrophenol, 1ml/Ampule. Standard SV Mix, 4-Nitrophenol, Concentration: 1000Ug/ml in Methanol, CAS no: 100-02-7, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, 2-Methyl-4,6-Dinitrophenol, 1ml/Ampule. Standard SV Mix, 2-Methyl-4,6-Dinitrophenol, Concentration: 1000Ug/ml in Methanol, CAS no: 534-52-1, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, 2,4-Dinitrophenol, 1ml/Ampule. Standard SV Mix, 2,4-Dinitrophenol, Concentration: 1000Ug/ml in Methanol, CAS no: 51-28-5, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, 2-Methylnaphthalene, 1ml/Ampule. Standard SV Mix, 2-Methylnaphthalene, Concentration: 1000Ug/ml in Methylene Chloride, CAS no: 91-57-6, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, 2-Chloronaphthalene, 1ml/Ampule. Standard SV Mix, 2-Chloronaphthalene, Concentration: 1000Ug/ml in Methanol, CAS no: 91-58-7, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, 1-Methylnaphthalene, 1ml/Ampule. Standard SV Mix, 1-Methylnaphthalene, Concentration: 1000Ug/ml in Methanol, CAS no: 90-12-0, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Pyrene, 1ml/Ampule. Standard SV Mix, Pyrene, Concentration: 1000Ug/ml in Methanol, CAS no: 129-00-0, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Phenanthrene, 1ml/Ampule. Standard SV Mix, Phenanthrene, Concentration: 1000Ug/ml in Methanol, CAS no: 85-01-8, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Naphthalene, 1ml/Ampule. Standard SV Mix, Naphthalene, Concentration: 1000Ug/ml in Methanol, CAS no: 91-20-3, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Indeno(1,2,3-Cd)Pyrene, 1ml/Ampule. Standard SV Mix, Indeno(1,2,3-Cd)Pyrene, Concentration: 1000Ug/ml in Methylene Chloride, CAS no: 193-39-5, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Fluoranthene, 1ml/Ampule. Standard SV Mix, Fluoranthene, Concentration: 1000Ug/ml in Methanol, CAS no: 206-44-0, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Dibenzo(A,H)Anthracene, 1ml/Ampule. Standard SV Mix, Dibenzo(A,H)Anthracene, Concentration: 1000Ug/ml in Methylene Chloride, CAS no: 53-70-3, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Chyrsene, 1ml/Ampule. Standard SV Mix, Chyrsene, Concentration: 1000Ug/ml in Acetone, CAS no: 218-01-9, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Benzo(K)Fluoranthene, 1ml/Ampule. Standard SV Mix, Benzo(K)Fluoranthene, Concentration: 1000Ug/ml in Acetone, CAS no: 207-08-9, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Benzo(Ghi)Perylene, 1ml/Ampule. Standard SV Mix, Benzo(Ghi)Perylene, Concentration: 1000Ug/ml in Methylene Chloride, CAS no: 191-24-2, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Benzo(B)Fluoranthene, 1ml/Ampule. Standard SV Mix, Benzo(B)Fluoranthene, Concentration: 1000Ug/ml in Acetone, CAS no: 205-99-2, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Benzo(A)Anthracene, 1ml/Ampule. Standard SV Mix, Benzo(A)Anthracene, Concentration: 1000Ug/ml in Methanol, CAS no: 56-55-3, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Anthracene, 1ml/Ampule. Standard SV Mix, Anthracene, Concentration: 1000Ug/ml in Acetone, CAS no: 120-12-7, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard SV Mix, Acenaphthene, 1ml/Ampule. Standard SV Mix, Acenaphthene, Concentration: 1000Ug/ml in Methanol, CAS no: 83-32-9, Shelf life: 6 months, Storage: 25 deg C nominal, Size: 1ml/Ampule

Standard Weathered Diesel Fuel no. 2 Kit. Weathered Diesel Fuel no. 2 Kit, Contains: Diesel Fuel no. 2 Standard, 25% Weathered, 50% Weathered, 75% Weathered, (ASTM Class 5 Accelerant), Concentration: 5000ug/ml,methylene chloride, Shell Life:6 Months, Volume: 1ml each

Standard Diesel Fuel no. 2 75% weathered (68334-30-5), 1ml. Standard Diesel Fuel no. 2 75% weathered (68334-30-5), (ASTM Class 5 Accelerant),Fire debris method, Concetration: 5000ug/ml,methylene chloride, Volume: 1ml

Standard Diesel Fuel no. 2 50% weathered (68334-30-5), 1ml. Standard Diesel Fuel no. 2 50% weathered (68334-30-5), (ASTM Class 5 Accelerant),Fire debris method, Concetration: 5000ug/ml,methylene chloride, Volume: 1ml

Standard Drinking Water Odor 1ml. Standard Drinking Water Odor, (2 components), +/-)-Geosmin, 2-Methylisoborneol, Concentration in Solvent: 100 ug/mL in P and T methanol, Shelf Life: 3 months, Storage: 0 degree C or colder, Volume: 1 mL/ampule.

Standard 524.2 Surrogate 1ML. Standard 524.2 Surrogate, (2 components), 1-Bromo-4-fluorobenzene (BFB), 1,2-Dichlorobenzene-d4, Voa stock, Concentration in Solvent: 2,000 ug/mL in P and T methanol, Storage: 0 degree C or colder, Shelf Life: 6 months, Volume: 1mL/ampule.

Standard MA VPH Matrix Spike Mix With Surrogate Rev. 1.1 1ML. Standard MA VPH Matrix Spike Mix With Surrogate Rev. 1.1, (16 components), Ust stock, Concentration in Solvent: 50 ug/mL in P and T methanol, Storage: 0 degree C or colder, Shelf Life: 6 months, Volume: 1mL/ampule.

Standard MA VPH Standard With Surrogate Rev. 1.1 (July 2004) 1ML. Standard MA VPH Standard With Surrogate Rev. 1.1 (July 2004), (16 components), UST STOCK, Concentration in Solvent: 10,000 ug/mL in P and T methanol, Storage: 0 degree C or colder, Shelf Life: 6 months, Volume: 1mL/ampule.

Standard Volatiles MegaMix Standard With Gases 1ml. Standard Volatiles MegaMix Standard With Gases, (60 components), VOA STOCK, Concentration in Solvent: 200 ug/mL each in P and T methanol, Storage: 0 degree C or colder, Shelf Life: 6 months, Volume: 1mL/ampule.

Standard Ketones Mix, 524.2 Rev. 4.1 1ml. Standard Ketones Mix, 524.2 Rev. 4.1, (5 components), VOA MIX, Concentration in Solvent: 5,000 ug/mL each in P and T methanol: water (90: 10), Storage: 0 degree C or colder, Shelf Life: 6 months, Volume: 1mL/ampule.

Standard 2-Propanol 1ml. Standard 2-Propanol, CAS: 67-63-0, Voa stock solution, Concentration in Solvent: 50, 000 ug/mL in water, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard Glycol 1ml. Standard Glycol, (2 components), Ethylene glycol (107-21-1)Propylene glycol (57-55-6), Voa stock solution, Concentration in Solvent: 50, 000 ug/mL each in DI water, Shelf Life: 6 months, Storage: Store in a cool dry ventilated location, Volume: 1mL/ampule.

Standard 1-Bromo-2-chloroethane 1ml. Standard 1-Bromo-2-chloroethane, CAS: 107-04-0, Concentration in Solvent: 2, 000 ug/mL in P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard Michigan GRO Mix 1ml. Standard Michigan GRO Mix, (14 components), ust method, Concentration in Solvent: 2, 000 ug/mL each in P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard Methanol 1ml. Standard Methanol CAS: 67-56-1, Voa mix, Concentration in Solvent: 10, 000 ug/mL in DI water, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard Ethanol 1ml. Standard Ethanol, CAS: 64-17-5, Voa mix, Concentration in Solvent: 10, 000 ug/mL in DI water, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard California Oxygenates Mix 1ml. Standard California Oxygenates Mix, (5 components), Voa mix, Concentration in Solvent: In P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1 mL/ampule.

Standard 8021/502.2 Surrogate Mix 1, 1ml. Standard 8021/502.2 Surrogate Mix 1, (3 components), Voa mix, 8000/500 SERIES, Concentration in Solvent: 2, 000 ug/mL each in P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1 mL/ampule.

Standard Alaska UST Method AK101AA 1ml. Standard Alaska UST Method AK101AA, (14 components), Concentration in Solvent: 2, 000 ug/mL each in P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1 mL/ampule.

Standard CLP 04.1 VOA Internal Standard/SMC Spike Mix 1ml. Standard CLP 04.1 VOA Internal Standard/SMC Spike Mix, (6 components), GRO MIX, Concentration in Solvent: 2, 500 ug/mL each in P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1 mL/ampule.

Standard MA VPH Matrix Spike Mix With Surrogate 1ml. Standard MA VPH Matrix Spike Mix With Surrogate, (14 components), VOA MIX, UST METHOD, Concentration in Solvent: 2, 500 ug/mL each in P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1 mL/ampule.

Standard MA VPH Surrogate Standard 1ml. Standard MA VPH Surrogate Standard, Compound: 2, 5-Dibromotoluene, Voa mix, Ust method, CAS: 615-59-8, Concentration in Solvent: 10, 000 ug/mL in P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1 mL/ampule.

Standard 8260A Surrogate Mix 1ml. Standard 8260A Surrogate Mix, 8000 series method, Concentration in Solvent: 2, 500 ug/mL each in P and T methanol, Storage: 0 degree C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule.

Standard Chloroprene 1ml. Standard Chloroprene, 8000 series method, CAS: 126-99-8, Concentration in Solvent: 5, 000 ug/mL in P and T methanol, Volume: 1 mL/ampule, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1 mL/ampule.

Standard Certified BTEX in Unleaded Gas Composite 1ml, (components 9), Concentration in Solvent: 5, 500 ppm gasoline in P and T methanol, (components 9), Storage: 0 degree C or colder, Shelf Life: 6 months, volume: 1 mL/ampule.

Standard CA WIP VOA 1ml. Standard CA WIP VOA, UST METHOD, (Components 11), Concentration in Solvent: 2, 000 ug/mL each in P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, volume: 1 mL/ampule.

Standard Unleaded Gasoline 75% weathered 1ml. Standard Unleaded Gasoline, ASTM Class 2 Accelerant, 75% weathered, Voa mix, FIRE DEBRIS, Cas: 8006-61-9, Shelf Life: 6 months, Storage: 0 degree C or colder, volume: 1ml/ampule

Standard Unleaded Gasoline 50% weathered 1ml. Standard Unleaded Gasoline, ASTM Class 2 Accelerant, 50% weathered, Voa mix, FIRE DEBRIS, Cas: 8006-61-9, Concentration in Solvent: Contains 1 mL each of these mixtures, Shelf Life: 6 months, volume: 1ml

Standard Unleaded Gasoline 1ml. Standard Unleaded Gasoline, CAS: 8006-61-9, Concentration in Solvent: 5, 000 ug/mL in P and T methanol, Storage: 0 degree C or colder, Shelf Life: 6 month, Volume: 1 mL/ampule

Calibration standard Residual Solvents Class 2 - Mix B 1ml. Calibration standard, Solvent: In dimethyl sulfoxide, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard Residual Solvents - Class 1 1ml. Calibration standard Residual Solvents - Class 1, 5 components, Solvent: In dimethyl sulfoxide, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard Residual Solvents Class 2 - Mix C 1ml. Calibration standard Residual Solvents Class 2 - Mix C, 8 components, Solvent: In dimethyl sulfoxide, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard Residual Solvents Class 2 - Mix B 1ml. Calibration standard Residual Solvents Class 2 - Mix B, Solvent: In dimethyl sulfoxide, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard Residual Solvents Class 2 - Mix A 1ml. Calibration standard Residual Solvents Class 2 - Mix A, Solvent: In dimethyl sulfoxide, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard European Pharmacopoeia/ICH Class 2 Mix B, Revised 1ml. Calibration standard European Pharmacopoeia/ICH Class 2 Mix B, Revised, Concentration: Prepared in water:dimethyl sulfoxide (80:20), Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard European Pharmacopoeia/ICH Class 1 Mix (revised) 1ml. Calibration standard European Pharmacopoeia/ICH Class 1 Mix (revised), Concentration: In water:dimethyl sulfoxide (80:20), Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard Blood Alcohol Mix Resolution Control 1ml. Calibration standard Blood Alcohol Mix Resolution Control, 8 components, Concentration: 0.100 g/dL each in water, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard European Pharmacopoeia/ICH Class 2 Mix C 1ml. Calibration standard European Pharmacopoeia/ICH Class 2 Mix C, Solvent: Prepared in water, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard European Pharmacopoeia/ICH Class 2 Mix A 1ml. Calibration standard European Pharmacopoeia/ICH Class 2 Mix A, Solvent: Prepared in dimethyl sulfoxide, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard European Pharmacopoeia/ICH Class 1 Mix 1ml. Calibration standard European Pharmacopoeia/ICH Class 1 Mix, Concentration: Prepared in water:dimethyl sulfoxide (80:20), Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard Polywax 1ml. Calibration standard Polywax, Compound:Polywax 1000, Solvent: Neat, Storage: 0 deg C or colder, Shelf Life: 6 months, Supports ASTM Methods D2887, D6352, D7169, D7398, and D7500. Volume: 1 mL/ampule

Calibration standard BAC Resolution Control n-P 1ml. Calibration standard standard BAC Resolution Control n-P, Concentration: 100 mg/dL each in water, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Standard USP 467 Mix no. 7 1ml. Calibration standard USP 467 Mix no. 7, Solvent: In dimethyl sulfoxide, Chloroform (67-66-3), 60 ug/mL, 1,4-Dioxane (123-91-1), 380 ug/mL, Methylene chloride (dichloromethane) (75-09-2), 600 ug/mL, Trichloroethene (79-01-6), 80 ug/mL, Volume: 1 mL/ampule

Calibration standard USP 467 Mixture no. 5 1ml. Calibration standard USP 467 Mixture no. 5, 5 components, Solvent: In dimethyl sulfoxide, Storage: 0 deg C or colder, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard USP 467 Mixture no. 4 1ml. Calibration standard USP 467 Mixture no. 4, 5 components, Solvent: In methanol, Storage: 0 deg C or colder, Shelf Life: 6 months, Similar To:Restek 36002, Volume: 1 mL/ampule

Calibration standard Free Fatty Acids Test 1ml. Calibration standard Free Fatty Acids Test, Concentration: 1,000 ug/mL each in water, (C4:0) Butyric acid, Acetic acid, Isobutyric acid (79-31-2), Isovaleric acid (503-74-2), Propionic acid (79-09-4), Valeric acid (109-52-4)Volume: 1 mL/ampule

Calibration standard Q-BOND and U-BOND Column Test Mix 1ml. Calibration standard Q-BOND and U-BOND Column Test Mix, 7 components, Concentration: 0.1% vol/vol each in heptane, Shelf Life: 6 months, Volume: 1 mL/ampule

Calibration standard EP 2.4.22 Composition of Fatty Acids by GC Mix 1 1ml. Calibration standard EP 2.4.22 Composition of Fatty Acids by GC Mix 1, 6 components, Concentration: 100mg total, Storage: 0 deg C or colder, Volume: 1 mL/ampule

Calibration standard cis/trans FAME Mix 1ml. Calibration standard cis/trans FAME Mix, 8 components, Concentration: 10 mg/mL total in methylene chloride, Shelf Life: 6 months, Storage: 0 deg C or colder, Volume: 1ml

Calibration standard NLEA FAME Mix 1ml. Calibration standard NLEA FAME Mix, 28 components, Concentration: 30 mg/mL total in methylene chloride, Storage: 0 deg C or colder, Volume: 1 mL/ampule

Calibration standard Methyl caproate 100mg. Calibration standard Methyl caproate, CAS: 106-70-7, Solvent: Neat, non-hazardous, Carbon Number:C6:0, Volume: 100mg

Standard LC Reversed Phase Test Mix no. 1 1ml. Calibration Standard LC Reversed Phase Test Mix no. 1, 4 components, Concentration: In methanol:water (75:25), Benzene (71-43-2), 3.00 mg/mL, Biphenyl (92-52-4), 0.06 mg/mL, Naphthalene (91-20-3), 0.50 mg/mL, Uracil (66-22-8), 0.02 mg/mL, Size: 1ml

Standard LC Normal Phase Test Mix no. 1 1ml/1ampule. Calibration Standard LC Normal Phase Test Mix no. 1, 4 components, Shelf Life: 6 months, Solvent: In hexane, Routine analysis using this mix can assist in determining the need to perform column and/or system maintenance. Size: 1 mL/ampule

Calibration Standard Amine Column Test Mix 1ml. Calibration Standard Amine Column Test Mix, 8 components, GC, Shelf Life: 1 month, For Stabilwax-DB, Rtx-5 Amine, Rtx-35 Amine, and Rtx-Volatile Amine columns. Solvent: In methylene chloride:methanol (1:1), Size: 1ml

Standard Nitroaromatics/Nitramine Explosives 1 mL/ampul. Standard, Nitroaromatics and Nitramine Explosives by LC (14 components), Concentration: 1,000 ug/mL, Solvent: acetonitrile, Volume: 1 mL/ampul, Shelf Life: 6 months, Storage: 10 deg C

Standard Oxy Set-Up Blend 2mL. Standard Oxy Set-Up Blend, 29 components, designed for the determination of the individual hydrocarbons present in spark ignition fuels, as well as fuel blends, Concentration In Solvent and Volume:2 mL prescored ampul

Standard Tricaprin (1,2,3-tricaprinoylglycerol). Standard Tricaprin (1,2,3-tricaprinoylglycerol), ASTM, CAS number: 621-71-6, Concentration In Solvent: 8,000 ug/mL in pyridine, Min Shelf Life:6 months, Volume: 5 mL/ampul

Standard (s)-(-)-1,2,4-Butanetriol 5mL/ampul. Standard (s)-(-)-1,2,4-Butanetriol, ASTM, CAS number: 42890-76-6, Concentration In Solvent and Volume:1,000 ug/mL in pyridine, Min Shelf Life:6 months, Volume: 5 mL/ampul

Surrogate Standard, Method 527, (3 components), Concentration in Solvent: 500 ug/mL each in acetone, Min Shelf Life: 6 months, Volume: 1 mL/ampul

Standard B/N Surrogate Mix (4/89 SOW) 10mL/ampul. Standard B/N Surrogate Mix (4/89 SOW), 3 components: 2-Fluorobiphenyl, Nitrobenzene-d5, p-Terphenyl-d14, Concentration in Solvent: 5,000 ug/mL each in methylene chloride, High purity for consistent results, Shelf Life: 6 months, Volume: 10 mL/ampul

Standard Monopalmitin,CAS Number:524-44-9, Concentration in Solvent: 5,000 ug/mL in pyridine, Min Shelf Life:6 months, Volume: 1 mL/ampul

Standard (s)-(-)-1,2,4-Butanetriol. Standard (s)-(-)-1,2,4-Butanetriol,CAS Number:42890-76-6, Concentration in Solvent: 1,000 ug/mL in pyridine,Min Shelf Life:6 months, Volume: 1 mL/ampul

Standard Triolein (1,2,3-tri[cis-octadecenoyl]glycerol). Standard Triolein (1,2,3-tri[cis-octadecenoyl]glycerol), CAS Number:122-32-7, Concentration in Solvent: 5,000 ug/mL in pyridine, Min Shelf Life:6 months Volume: 1 mL/ampul

Standard Diolein (1,3-di[cis-octadecenoyl]glycerol). Standard Diolein (1,3-di[cis-octadecenoyl]glycerol), CAS Number:2465-32-9, Concentration in Solvent: 5,000 ug/mL in pyridine, Min Shelf Life:6 months, Volume: 1 mL/ampul

Standard Monolein (1-mono[cis-9-octadecenoyl]-rac-glycerol). Standard Monolein (1-mono[cis-9-octadecenoyl]-rac-glycerol), CAS Number:111-03-5, Concentration in Solvent: 5,000 ug/mL in pyridine, Min Shelf Life: 6 months, Volume: 1 mL/ampul

Standard Glycerin,CAS Number:56-81-5, Concentration in Solvent: 500 ug/mL in pyridine, Min Shelf Life:6 months, Volume: 1 mL/ampul

GC Multiresidue Pesticide Standard no. 9, Concentration In Solvent: 100 ug/mL each in toluene, Min Shelf Life:6 months, Volume: 1 mL/ampul

GC Multiresidue Pesticide Standard No.8 (24 components) Organophosphorus Compounds, Concentration in solvents: 100 ug/mL in toluene, Volume: 1 mL/ampul

GC Multiresidue Pesticide Standard No.7 (10 components) Herbicide Methyl Esters, Concentration in solvents: 100 ug/mL in toluene, Volume: 1 mL/ampul

GC Multiresidue Pesticide Standard No.6 (18 components) Synthetic Pyrethroid Compounds, Concentration in solvents: 100 ug/mL in toluene, Volume: 1 mL/ampul

GC Multiresidue Pesticide Standard No.5 (34 components) Organonitrogen Compounds, Concentration in solvents: 100 ug/mL in toluene, Volume: 1 mL/ampul

GC Multiresidue Pesticide Standard No.4 (28 components) Organonitrogen Compounds, Concentration in solvents: 100 ug/mL in toluene, Volume: 1 mL/ampul

GC Multiresidue Pesticide Standard No.3 (25 components) Organonitrogen Compounds, Concentration in solvents: 100 ug/mL in toluene, Volume: 1 mL/ampul

GC Multiresidue Pesticide Standard No.2 (40 components) Organochlorine Compounds, Concentration in solvents: 100 ug/mL in toluene:acetonitrile (99:1), Volume: 1 mL/ampul

GC Multiresidue Pesticide Standard No.1 (16 components) Organophosphorus Compounds, Concentration in solvents: 100 ug/mL in toluene, Volume: 1 mL/ampul

GC Multiresidue Pesticide Standard No.1 (16 components) Organophosphorus Compounds, Concentration in solvents: 100 ug/mL in toluene, Volume: 1 mL/ampul

Standard Pesticide Surrogate Mix 5mL. Standard Pesticide Surrogate Mix, EPA 8080, 8081, Concentration In Solvent: 200 ug/mL in acetone, Min Shelf Life:6 months, Volume: 5 mL/ampul

Standard 515.4 Calibration Mix, Solvent:Acetone, Pesticide Stock Mixture, Volume: 1mL.

Standard 515.4 Surrogate Mix. Standard 2,4-Dichlorophenylacetic Acid, Concentration: 1000Ug/mL, Solvent: Acetone, Volume: 1mL

Standard Method 551.1 Pesticide Herbicide Mix 1mL. Standard Method 551.1 Pesticide Herbicide Mix, Concentration: 1000Ug/mL, Solvent: Acetone, Pesticide Stock Mixture, Volume: 1mL

Standard Paraquat & Diquat Calibration Mix 1mL. Standard Paraquat & Diquat Calibration Mix, Concentration: 1000Ug/mL, Solvent: H2O, Pesticide Stock Mixture, Volume: 1mL

Pesticide Stock Standard, Metribuzin, Concentration: 1000Ug/mL, Solvent: Acetone, Volume: 1mL.

Standard Pesticide Stock Mix, Dalapon, Concentration: 1000Ug/mL, Solvent: Acetonitrile, Volume:1mL.

Standard Chlorinated Acids By Hplc Mix A 1mL. Standard Chlorinated Acids By Hplc Mix A, Concentration: 1000Ug/mL, Solvent: Acetonitrile, Pesticide Stock Mixture, Volume: 1mL

Standard Chlorinated Acids By Hplc Mix B 1mL. Standard Chlorinated Acids By Hplc Mix B, Concentration: 1000Ug/mL, Solvent: Acetonitrile, Pesticide Stock Mixture, Volume: 1mL

Standard Chlorinated Acid Herbicide 1mL. Standard Chlorinated Acid Herbicide, Concentration: 1000Ug/mL, Solvent: Acetonitrile, Pesticide Stock Mixture, Volume: 1mL

Pesticide Stock Standard 1mL. Pesticide Stock Standard, AMPA, (Glypohosate Metabolite), Concentration: 100Ug/mL, Di Water, Volume:1mL

Pesticide Stock Standard, Glyphosate, Volume: 5mL, Concentration: 1000Ug/mL DI Water.

Herbicide Stock Standard, Glyphosate, Volume: 1mL, Concentration: 1000Ug/mL DI Water.

Standard Nitrogen/Phosphorous Pesticide Mix 1mL. Standard SV Mix, Method 525.2ppm, Nitrogen/Phosphorous Pesticide Mix, No.2, Concentration: 1000Ug/mL, Solvent: Acetone, Volume: 1mL

Standard Organophosphorus Pesticide Mix No.1 (Rev), (7 components), Method 525.2, Concentration in Solvent: 500 ug/mL each in acetone, Min Shelf Life: 3 months, Volume: 1 mL/ampul

PCB Congener Standard 1mL/ampul. PCB Congener Standard No.1, Concentration in Solvent: 10 ug/mL each in isooctane, Min Shelf Life:6 months, Volume: 1 mL/ampul

Standard FAPAS Series 5 OC Pesticide Mix 2, Concentration In Solvent: In acetone, Min Shelf Life:6 months, Volume: 1 mL/ampul

Standard Aroclor 1268 Solution 1mL. Standard Aroclor 1268 solution, CAS number: 11100-14-4, Concentration In Solvent:1,000 ug/mL in hexane, Min Shelf Life:6 months, Volume: 1 mL/ampul

Standard Minnesota Ag List 1 Pesticides Mix B, Concentration in Solvent: 200 ppm each in acetone,Min Shelf Life:6 months, Volume: 1 mL/ampul

Standard Minnesota Ag List 1 Pesticides Mix A, Concentration in Solvent: 200 ppm each in acetone, Min Shelf Life: 6 months, Volume: 1 mL/ampul

Standard Aroclor 1016/1260, exhibit lot-to-lot variation, Concentration in Solvent: 200 ug/mL in isooctane, Min Shelf Life: 6 months, Volume: 1 mL/ampul

Pesticide Standard Mix B, Concentration in Solvent: In hexane:toluene (90:10), Min Shelf Life: 6 months, Volume: 1 mL/ampul

Pesticide Standard Mix A 1mL. Pesticide Standard Mix A, Concentration In Solvent: In hexane:toluene (90:10), Min Shelf Life:6 months, Volume: 1 mL/ampul

Standard Organochlorine Pesticide Mix C No.1, Concentration in Solvent: 200 ug/mL each in hexane:toluene (1:1), Min Shelf Life:6 months, Volume: 1 mL/ampul

Standard PCB Congener Mix, (19 components), Method 8082A, Concentration in Solvent: 100 ug/mL each in isooctane, Min Shelf Life: 6 months, Volume: 1 mL/ampul

Standard 2,3',4,4',5-Pentachlorobiphenyl, CAS Number:31508-00-6, Concentration in Solvent: 10 ug/mL in isooctane, Min Shelf Life: 6 months, Volume: 1 mL/ampul

Standard Method 525.2 PCB Congener Mix (8 components), Concentration in Solvent: 200 ug/mL each in acetone, Min Shelf Life: 6 months, Volume: 1 mL/ampul

Standard Decachlorobipheny 1mL/ampul. Standard PCB Mix Decachlorobiphenyl, CAS Number:2051-24-3, Concentration: in Solvent: 10 ug/mL in isooctane, Min Shelf Life:6 months, Volume:1 mL/ampul

Standard 2,2',3,4,4',5,5'-Heptachlorobiphenyl 1 mL/ampul. Standard 2,2',3,4,4',5,5'-Heptachlorobiphenyl, CAS Number:35065-29-3, Concentration: in Solvent: 10 ug/mL in isooctane, Min Shelf Life:6 months, Volume: 1 mL/ampul

Internal Surrogate 8141 1ml/ampule. Internal Surrogate 8141, NPD detector, 4-Chloro-3-nitrobenzotrifluoride, Cas number: 121-17-5, Concentration: 1,000 ug/mL in acetone, Minimum shelf life: 6 months, Volume: 1ml/ampule

LC Multiresidue Pesticide Standard no.10 1ml/ampule. LC Multiresidue Pesticide Standard no.10, Carbendazim, Cas number: 10605-21-7, Contains: Carbamate/Uron Compounds, Detect and quantify pesticides, Concentration: 100 ug/mL each in acetonitrile, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard LC Multiresidue Pesticide Kit, Detect and quantify pesticides, kit contains 204 compounds of interest, Concentration: Contains 1 mL each of these mixtures, Minimum shelf life: 6 months

Standard Haloacetic Acid Mix 1ml/ampule. Standard Haloacetic Acid Mix, 9 components, Concentration: 1,000 ug/mL each in methyl tert-butyl ether, Minimum shelf life: 6 months, Volume: 1ml/ampule

Propylene Glycol Standard Mix 1ml/ampule. Propylene Glycol Standard Mix, 3 components, Solvent: In P&T methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard EPA Method 8310 PAH Mixture 1ml/ampule. Standard EPA Method 8310 PAH Mixture, 18 components, Concentration: 500 ug/mL each in acetonitrile:toluene (92:8), Minimum shelf life: 6 months, Volume: 1ml/ampule

Hydraulic Oil Standard 1 mL/ampul. Hydraulic Oil Standard, CAS number: 64741-89-5, Concentration: 50,000 ug/mL in methylene chloride, High concentration, For total petroleum hydrocarbon pattern recognition of hydraulic oil, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Creosote Oil Standard 1 mL/ampul. Creosote Oil Standard, CAS number: 8001-58-9, Concentration: 50,000 ug/mL in methylene chloride, High concentration, For total petroleum hydrocarbon pattern recognition of creosote oil, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Formaldehyde-DNPH Mix 1 mL/ampul. Standard Formaldehyde-DNPH Mix, High concentration, CAS number: 1081-15-8, Acetonitrile solvent-suitable for HPLC analyses, Concentration: 500 ug/mL in acetonitrile, Minimum shelf life: 6 months, Sampling airborne carbonyl in EPA Method, Volume: 1 mL/ampul

Standard 3,3'-Dichlorobenzidine 1 mL/ampul. Standard 3,3'-Dichlorobenzidine, CAS number: 91-94-1, Conventration: 2,000 ug/mL in methylene chloride, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Benzidine Mix (2 components) 1 mL/ampul. Benzidine Mix (2 components), 605 Benzidines Calibration Mix, Concentration: 2,000 ug/mL each in methylene chloride, Components:Benzidine (92-87-5), 3,3'-Dichlorobenzidine (91-94-1), Minimum shelf life: 6 months

Standard Epsilon-Caprolactam 1 mL/ampul. Standard Epsilon-Caprolactam, CAS number: 105-60-2, Concentration: 2,000 ug/mL in methylene chloride, Minimum shelf life: 6 months, Volume: 1 mL/ampul

DRO/ORO Calibration Standard 12 components 1 mL/ampul. DRO/ORO Calibration Standard, 12 components, Molecular formula: CH2CL2, Concentration: 2,000 ug/mL each in methylene chloride, Minimum shelf life: 6 months, Volume: 1 mL/ampul

DRO/ORO Calibration Standard 1 mL/ampul. DRO/ORO Calibration Standard, 2 components, Concentration: 25,000 ug/mL each in methylene chloride, Compound: 10W30 Motor oil (64742-65-0):diesel fuel number 2 (68334-30-5) (1:1 blend), Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Semivolatiles MegaMix EPA Method 625 1 mL/ampul. Standard Semivolatiles MegaMix EPA Method 625 (54 components), CH2CL2, Concentration: 1,000 ug/mL each in methylene chloride, Minimum shelf life: 6 months, Incorporates all phenols, for fast preparation and calibration, Volume: 1 mL/ampul

Standard GC-MS Performance Check Mix Method 525.2 1 mL/ampul. Standard GC-MS Performance Check Mix Method 525.2, 3 components, Concentration:1,000 ug/mL each in acetone, Compounds: 4,4'-DDT (50-29-3), DFTPP (decafluorotriphenylphosphine), Endrin, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Surrogate Standard Mix Method 525.2 1 mL/ampul. Surrogate Standard Mix Method 525.2, 4 components, Concentration:1,000 ug/mL each in acetone, Minimum shelf life: 6 months, Compounds:2-Nitro-m-xylene, Perylene-d12, Pyrene-d10, Triphenylphosphate, Volume: 1 mL/ampul

Internal Standard Mix Method 525.2 1 mL/ampul. Internal Standard Mix Method 525.2, 3 components, Concentration: 1,000 ug/mL each in acetone, Compounds:Acenaphthene-d10 (15067-26-2), Chrysene-d12 (1719-03-5), Phenanthrene-d10 (1517-22-2), Minimum shelf life: 6 months, Volume: 1 mL/ampul

Residual Range Calibration Verification Standard (CVS) 1 mL/ampul. Residual Range Calibration Verification Standard (CVS), Compounds: SAE30 motor oil:SAE40 motor oil (1:1) (64742-65-0), 2 components, Concentration: 25,000 ug/mL in methylene chloride, Minim,um shelf life: 6 months, Volume:1 mL/ampul

Residual Range Calibration Standard (RCS) 1 mL/ampul. Residual Range Calibration Standard (RCS), Components: SAE30 motor oil:SAE40 motor oil (1:1) (64742-65-0), Concentration: 50,000 ug/mL in methylene chloride, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard n-Triacontane-d62 1 mL/ampul. Standard n-Triacontane-d62, CAS number: 638-68-6, UST stock, Concentration: 500 ug/mL in methylene chloride, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard 8270/Appendix IX Kit, Contains:8270 MegaMix Standard, 605 Benzidines Calibration Mix, Appendix IX Mix number 1, Revised (No Methapyrilene), Methapyrilene Standard, Appendix IX Mix number 2, Minimum shelf life: 6 months, Contains 1 mL each of these mixtures

Standard TNRCC 1006 Retention Time Marker Mix 1 mL/ampul. Standard TNRCC 1006 Retention Time Marker Mix, 9 components, (C6)-n-Hexane, n-Heptane, (C8)-n-Octane, (C10)-n-Decane, (C12)-n-Dodecane, (C16)-n-Hexadecane, (C21)-n-Heneicosane, (C28)-n-Octacosane, (C35)-n-Pentatriacontane, Volume: 1 mL/ampul

Standard OLC 03.2 SVOA Deuterated Monitoring Compound 1 mL/ampul. Standard OLC 03.2 SVOA Deuterated Monitoring Compound (DMC) (16 components), Concentration: 2,000 ug/mL each in methylene chloride, Minimum shelf life: 6 months, for detection of low-concentration volatile pesticide, Volume: 1mL/ampul

Standard Carbohydrate LC Performance Check Mix 4 mL. Standard Carbohydrate LC Performance Check Mix, Components: Glucose (50-99-7), Fructose (57-48-7), Lactose (5989-81-1), Maltose (6363-53-7), Sucrose, Offered dry for enhanced stability, Minimum shelf life: 6 months, Volume: 4 mL screw-cap vial

Standard Fragrance Materials Test Mix 0.5 mL. Standard Fragrance Materials Test Mix, 12 components, System suitability mixture for GC systems and analytical columns, Concentration: Neat, Performance evaluation for essential oils, Minimum shelf life: 6 months, Volume: 0.5 mL in an amber ampul

Standard TNRCC 1005 Retention Time Markers Mix 1mL/ampul. TNRCC 1005 Retention Time Markers Mix, Concentration: 200 ug/mL each in pentane, Components: (C6) n-Hexane, (C12) n-Dodecane, (C28) n-Octacosane, (C35) n-Pentatriacontane, Prepared in n-pentane, Minimum shelf life: 6 months, Volume: 1mL/ampul

Internal Standard Mix EPA 528 1 mL/ampul. Internal Standard Mix, EPA 528 (2 components), Solvent: Methylene chloride, Minimum shelf life: 6 months, Components: 3-Nitro-o-xylene (83-41-0), 2,3,4,5-Tetrachlorophenol (4901-51-3), Reference materials for U.S. EPA Method 528, Volume: 1 mL/ampul

Standard Phenol Calibration Mix EPA 528 1 mL/ampul. Standard Phenol Calibration Mix, EPA 528, 12 components, Concentration: 2,000 ug/mL each in methylene chloride, Minimum shelf life: 6 months, Reference materials for U.S, Fortification solution, Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard SV System Performance Check Mix (SPCC) 1 mL/ampul. Standard SV System Performance Check Mix (SPCC), 4 components, Concentration: 2,000 ug/mL each in methylene chloride, Components: 2,4-Dinitrophenol, Hexachlorocyclopentadiene 4-Nitrophenol, N-Nitroso-di-n-propylamine, Volume: 1 mL/ampul

Standard Benzidines Mix (3 components) 8270 1 mL/ampul. Standard Benzidines Mix (3 components) 8270, Concentration: 2,000 ug/mL each in methanol, Components: Benzidine (92-87-5), 3,3'-Dichlorobenzidine (91-94-1), 3,3'-Dimethylbenzidine (o-tolidine), Minimum shelf life: 6 months, Volume: 1 mL/ampul

Standard Matrix Spike Mix 8270 76 components 5 mL/ampul. Standard Matrix Spike Mix 8270 76 components, Concentration: 200 ug/mL each in methanol:methylene chloride (80:20) (3-methylphenol and 4-methylphenol at 100 ug/mL), Minimum shelf life: 6 months, Volume: 5 mL/ampul

Standard C50 in Toluene (n-Pentacontane) (C50) 1 mL/ampul. Standard C50 in Toluene (n-Pentacontane) (C50), CAS: 6596-40-3, Concentration: 10 ug/mL in toluene, Minimum shelf life: 6 months, Primary reference calibration, Meets CCME 2001 Petroleum Hydrocarbons in Soil Method-Tier 1, Volume: 1 mL/ampul

Standard Calibration Mix CCME PHC 3 components 1 mL/ampul. Standard Calibration Mix CCME PHC, 3 components, Concentration: 5,000 ug/mL each in toluene, Minimum shelf life: 6 months, Components: (C10) n-Decane (124-18-5), (C16) n-Hexadecane (544-76-3), (C34) n-Tetratriacontane, Volume: 1 mL/ampul

Standard Extraction Solvent Stock Solution No. 2 2 components 20 mL/ampul. Standard Extraction Solvent Stock Solution No. 2, 2 components, Solvent: In hexane, Components: (C10) n-Decane (124-18-5), (C40) n-Tetracontane (4181-95-7), Minimum shelf life: 6 months, Volume: 20 mL/ampul

Standard Extraction Solvent Stock Solution No. 1 2 components 5 mL/ampul. Standard Extraction Solvent Stock Solution No. 1, 2 components, Solvent: In hexane, Components: (C10) n-Decane (124-18-5), (C40) n-Tetracontane (4181-95-7), Minimum shelf life: 6 months, Volume: 5 mL/ampul

Standard Stearyl Stearate Test Solution 10 mL/ampul. Standard Stearyl Stearate Test Solution, CAS number: 2778-96-3, Concentration: 2,000 ug/mL in cyclohexane, Minimum shelf life: 6 months, Volume: 10 mL/ampul (to check one Florisil cartridge)

Standard Mixture of n-alkanes 1mL/ampul. Standard Mixture of n-alkanes for System Performance Test, 16 components, Concentration: 50ug/mL each in cyclohexane, For GC analysis of TPHs in water, Environmentally safer, Minimum shelf life: 6 months, Reference mixtures for ISO/DIS 9377, Volume: 1mL/ampul

Standard SV Mix, Ust Method, Ma Fractionation Check, 1ml/Ampule. Standard SV Mix, Ust Method, Ma Fractionation check, Concentration: 25ug/ml,Hexane, Shelf Life: 6 Months, Storage: 10 deg C or colder, Volume: 1ml/Ampule

Standard Ma Fractionation Surrogate Spike Mix, 1ml/Ampule. Standard Ma Fractionation Surrogate Spike Mix, Concentration: Ust Method, 4000ug/ml, Hexane, Compounds: 2-Bromonaphthalene, 2-Fluorobiphenyl, Shelf Life: 6 Months, Storage: 10 deg C or colder, Volume: 1ml/Ampule

Standard, MA EPH Surrogate Spike Mix, 1ml/Ampule. Standard, MA EPH Surrogate Spike Mix, Concentration: 4000ug/ml,Acetone,Compounds: 1-Chlorooctadecane, o-Terphenyl, Shelf Life: 6 Months, Storage: 10 deg C or colder, Volume: 1ml/Ampule

SV Mix, Tributyltin Chloride Calibration Mixture standard, 1ml/Ampule. SV Mix, Tributyltin Chloride Calibration Mixture standard, CAS no:1461-22-9, Concentration: 2000ug/ml, Methylene Chloride, Shelf life: 6 months, Storage: 10 deg C or colder, Volume: 1ml/Ampule

SV Mix, Tripentyltin Chloride Surrogate standard, 1ml/Ampule. SV Mix, Tripentyltin Chloride Surrogate standard, CAS no:3342-67-4, Concentration: 2000Ug/Ml,Methylene Chloride, Shelf Life: 6 Months, Storage: 10 deg C or colder, Volume: 1Ml/Ampule

SV Mix, Tri-N-Propyltin Chloride standard, 1ml/Ampule. SV Mix, Tri-N-Propyltin Chloride standard, CAS no: 995-25-5, Concentration: 2000Ug/Ml,Methylene Chloride, Shelf Life: 6 Months, Storage: 10 deg C or colder, Volume: 1Ml/Ampule

Tetrapentyltin Internal Standard, 1 mL/ampule. Tetrapentyltin Internal Standard, CAS no: 3765-65-9, Concentration: 2,000 ug/mL in methylene chloride, Shelf life: 6 months, Storage: 10 deg C or colder, Volume: 1ml/Ampule

Tetra-n-propyltin Internal Standard, 1 mL/ampule. Tetra-n-propyltin Internal Standard, CAS no: 2176-98-9, Concentration: 2,000 ug/mL in methylene chloride, Storage: 10 deg C or colder, Shelf life: 6 Months, Volume: 1ml/Ampule

Standard Butyltin Chloride Calibration Mixture, 1ml/Ampule. Standard Butyltin Chloride Calibration Mixture, Concentration:2,000 ug/mL each in methylene chloride, Shelf Life: 6Months, Compounds: n-Butyltin trichloride, Dibutyltin dichloride, Tetrabutyltin, Tributyltin chloride, Volume: 1Ml/Ampule

Standard PAH Calibration Mix B 610, 1 mL/ampule. Standard PAH Calibration Mix B 610, (16 components) in methylene chloride:methanol (1:1), For LC-UV detection. Shelf llife: 6 Months, Storage: 25 deg C nominal, Volume: iml/ampoule

Standard Surrogate (1,2-Dinitrobenzene)8330, 1ml. Surrogate (1,2-Dinitrobenzene), CAS no: 528-29-0, Concentration: 1,000 ug/mL in methanol, Shelf life: 6 Months, Storage: 10 deg C or colder, Volume: 1 mL/ampule

Standard Surrogate (3,4-Dinitrotoluene) 8095, 1ml. Standard Surrogate (3,4-Dinitrotoluene) 8095, CAS no: 610-39-9, Concentration: 1,000 ug/mL in methanol, Shelf Life: 6 Months, Storage: 10 deg C or colder, Volume: 1 mL/ampule

Standard SV Mix, Bis(2-Ethylhexyl)Adipate, 1ml/Ampule. Standard SV Mix, Bis(2-Ethylhexyl)Adipate, Concentration: 1000Ug/ml in Methanol, CAS no: 103-23-1, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, 1,4-Dichlorobenzene, 1ml/Ampule. Standard SV Mix, 1,4-Dichlorobenzene, Concentration: 1000Ug/ml in Methanol, CAS no: 106-46-7, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, 1,3-Dichlorobenzene, 1ml/Ampule. Standard SV Mix, 1,3-Dichlorobenzene, Concentration: 1000Ug/ml in Methanol, CAS no: 541-73-1, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, 1,2-Dichlorobenzene, 1ml/Ampule. Standard SV Mix, 1,2-Dichlorobenzene, Concentration: 1000Ug/ml in Methanol, CAS no: 95-50-1, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, Benzidine, 1ml/Ampule. Standard SV Mix, Benzidine, Concentration: 1000Ug/ml in Methanol, CAS no: 92-87-5, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, 1,2,4-Trichlorobenzene, 1ml/Ampule. Standard SV Mix, 1,2,4-Trichlorobenzene, Concentration: 1000Ug/ml in Methanol, CAS no: 120-82-1, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mixcarbazole, 1ml/Ampule. Standard SV Mixcarbazole, Concentration: 1000Ug/ml in Methanol, CAS no: 86-74-8, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, N-Nitrosodiphenylamine, 1ml/Ampule. Standard SV Mix, N-Nitrosodiphenylamine, Concentration: 1000Ug/ml in Methanol, CAS no: 86-30-6, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, N-Nitrosodimethylamine, 1ml/Ampule. Standard SV Mix, N-Nitrosodimethylamine, Concentration: 1000Ug/ml in Methanol, CAS no: 62-75-9, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, Bis(2-Ethylhexyl)Phthalate, 1ml/Ampule. Standard SV Mix, Bis(2-Ethylhexyl)Phthalate, Concentration: 1000Ug/ml in Methylene Chloride, CAS no:117-81-7, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, 2,6-Dichlorophenol, 1ml/Ampule. Standard SV Mix, 2,6-Dichlorophenol, Concentration: 1000Ug/ml in Methanol, CAS no: 87-65-0, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, 3-Methylphenol, 1ml/Ampule. Standard SV Mix, 3-Methylphenol, Concentration: 1000Ug/ml in Methanol, CAS no: 108-39-4, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, 2,3,4,6-Tetrachlorophenol, 1ml/Ampule. Standard SV Mix, 2,3,4,6-Tetrachlorophenol, Concentration: 1000Ug/ml in Methanol, CAS no: 58-90-2, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, 2,4,6-Tribromophenol, 1ml/Ampule. Standard SV Mix, 2,4,6-Tribromophenol, Concentration: 1000Ug/ml in Methanol, CAS no: 118-79-6, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard SV Mix, 2,4,6-Trichlorophenol, 1ml/Ampule. Standard SV Mix, 2,4,6-Trichlorophenol, Concentration: 1000Ug/ml in Methanol, CAS no: 88-06-2, Shelf life: 6 months, Storage: 10 deg C or colder, Size: 1ml/Ampule

Standard Diesel Fuel no. 2 25% weathered (68334-30-5), 1ml. Standard Diesel Fuel no. 2 25% weathered (68334-30-5), (ASTM Class 5 Accelerant),Fire debris method, Concetration: 5000ug/ml,methylene chloride, Volume: 1ml

Standard Diesel Fuel no. 2 unweathered (68334-30-5), 1ml. Standard Diesel Fuel no. 2 unweathered (68334-30-5), (ASTM Class 5 Accelerant),Fire debris method, Concetration: 5000ug/ml,methylene chloride, Volume: 1ml

Kerosene Standard unweathered, 1ml. Kerosene Standard unweathered, CAS no:84742-81-0, Concentration: 5,000 ug/mL in methylene chloride, Shelf Life : 6 Months, Prepared from a single-source (one-refinery) product, Fire debris method, Storage: 25 deg C nominal, (ASTM Class 4), Volume: 1 mL/ampule

Standard unweathered Mineral Spirit, (8030-30-6), 1ml. Standard unweathered Mineral Spirit, (8030-30-6) Fire debris method, 5000ug/ml,CH2Cl2, Shelf Life: 6 Months, Volume: 1ml

Standard E1387 Column Resolution Check Mix, 1 mL/ampule. Standard E1387 Column Resolution Check Mix, (13 components), Concentration: 2,000 ug/mL each in methylene chloride, Shelf Life; 6 Months, Storage: 10 deg C or colder, Volume: 1 mL/ampule

DHA PONA Standard, 0.15 mL in Autosampler Vial. DHA PONA Standard (188 components, Includes: Paraffins, Isoparaffins, Olefins, Naphthenes, Aromatics, Oxygenates), ASTM Methods D6729, D6730, D6733, Concentration: Neat, torage : 4 deg C or colder, Volume: 0.15 mL in Autosampler Vial

DHA PiONA Standard, 0.15 mL in Autosampler Vial. DHA PiONA Standard (133 components- Includes- Paraffins, Isoparaffins, Olefins, Naphthenes, Aromatics), ASTM D6729, D6730, and D6733, Concentration: Neat, Storage : 4 deg C or colder, Volume: 0.15 mL in Autosampler Vial

DHA Aromatics Standard, 0.15 mL in Autosampler Vial. DHA Aromatics Standard (37 components), ASTM D6729, D6730, and D6733, Conentration: Neat, Concentration: Neat, Storage : 4 deg C or colder, Volume: 0.15 mL in Autosampler Vial

DHA Olefins Standard, 0.15 mL in Autosampler Vial. DHA Olefins Standard (26 components), determination of the individual hydrocarbons present in spark ignition engine fuel, ASTM D6729, D6730, and D6733, Conentration: Neat, Storage : 4 deg C or colder, Volume: 0.15 mL in Autosampler Vial

DHA Isoparaffins Standard, 0.15 mL in Autosampler Vial. DHA Isoparaffins Standard, (33 components), determination of the individual hydrocarbons present in spark ignition engine fuel, ASTM D6729, D6730, and D6733, Concentration: Neat, Storage : 4 deg C or colder, Volume: 0.15 mL in Autosampler Vial

DHA Paraffins Standard, 0.15 mL in Autosampler Vial. DHA Paraffins Standard, determination of the individual hydrocarbons present in spark ignition engine fuels, ASTM D6729, D6730, and D6733, (10 Components), Concentration: Neat, Storage : 4 deg C or colder, Volume: 0.15 mL in Autosampler Vial

Standard Oxygenates 1ml. Standard Oxygenates,(6 components), Concentration in Solvent: In P and T methanol, VOA STOCK, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1 mL/ampule.

Standard Drinking Water VOA MegaMix Standard, 524.2 Rev. 4.1 1ml. Standard Drinking Water VOA MegaMix Standard, 524.2 Rev. 4.1, (73 components), Concentration in Solvent: 2,000 ug/mL each in P and T methanol, Storage: 0 degree C or colder, Shelf Life: 6 months, Volume: 1mL/ampule.

Standard Acrolein/Acrylonitrile 1ML. Standard Acrolein/Acrylonitrile, (2 components), Acrolein (107-02-8), Acrylonitrile (107-13-1), VOA STOCK, Concentration in Solvent: 2,000 ug/mL each in DI water, Shelf Life: 2month, Storage: 10 degree C or colder,Volume: 1ml/ampule.

Standard Volatiles MegaMix Standard, EPA Method 624 1ml. Standard Volatiles MegaMix Standard, EPA Method 624, (26 components), Concentration in Solvent: 2, 000 ug/mL each in P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard Acrylamide 1ml. Standard Acrylamide, CAS: 79-06-1, Voa stock, Concentration in Solvent: 1, 000 ug/mL in methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard OLC 03.2 VOA MegaMix 1ml. Standard OLC 03.2 VOA MegaMix, (42 components), Concentration in Solvent, 2, 000 ug/mL each in P and T methanol, Shelf Life: 6 months, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard 8260B Acetate Mix (Revised) 1ml. Standard 8260B Acetate Mix (Revised), Voa mix, n-Amyl acetate, Butyl acetate, Ethyl acetate, Isopropyl acetate, Methyl acetate, Propyl acetate, Vinyl acetate, Concentration in Solvent: 2, 000 ug/mL each in P and T methanol, Volume: 1mL/ampule.

Standard BTEX 1ml. Standard BTEX, (6 components), Benzene, Ethylbenzene, Toluene, m-Xylene, o-Xylene, p-Xylene, UST MIX, Concentration in Solvent: 2, 000 ug/mL each in P and T methanol (m- and p-xylene at 1, 000 ug/mL), Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard Gasoline Component 1ml. Standard Gasoline Component, (10 components), Voa mix, Concentration in Solvent: 10, 000 ug/mL total in P and T methanol, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard Certified Aromatics in Gasoline 1ml. Standard Certified Aromatics in Gasoline, (16 components), VOA MIX, Concentration in Solvent: 5, 500 ppm gasoline in P and T methanol, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard Retention Time Marker 1ml. Standard Retention Time Marker, (3 components), (C6) n-Hexane, (C10) n-Decane, (C12) n-Dodecane, VOA MIX, Concentration in Solvent: 1, 000 ug/mL each in P and T methanol, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard 8260B Matrix Spike Mix 1ml. Standard 8260B Matrix Spike Mix, (5 components), Benzene, Chlorobenzene, 1, 1-Dichloroethene, Toluene, Trichloroethylene, Concentration in Solvent: 2, 500 ug/mL each in P and T methanol, Voa stock solution, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Standard 8260B MegaMix Calibration Mix Kit 1ml. Standard 8260B MegaMix Calibration Mix Kit, Volatiles, Concentration in Solvent: Contains 1 mL each of these mixtures, Storage: 0 degree C or colder, Volume: 1mL/ampule.

Internal Standard 8140 1ml/ampule. Internal Standard 8140, NPD Detector, 1-bromo-2-nitrobenzene, Cas number: 577-19-5, Concentration: 1,000 ug/mL in acetone, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Performance Check Mix 531.1 1ml/ampule. Standard Performance Check Mix 531.1, 4 components, Solvent: In methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Internal Standard 531.1 1ml/ampule. Internal Standard 531.1, 4-Bromo-3,5-dimethylphenyl-N-methylcarbamate, Cas number: 672-99-1, Concentration: 100 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Carbamate Pesticide Calibration Mixture 531.1 1ml/ampule. Standard Carbamate Pesticide Calibration Mixture, 10 components, Concentration: 100 ug/mL each in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Herbicide mix MCPP 1ml/ampule. Standard Herbicide mix MCPP, Cas number: 93-65-2, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 month, Volume: 1ml/ampule

Standard Herbicide mix MCPA 1ml/ampule. Standard Herbicide mix MCPA, Cas number: 94-74-6, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 month, Volume: 1ml/ampule

Standard Herbicide mix Picloram 1ml/ampule. Standard Herbicide mix Picloram, Cas number: 1918-02-1, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 month, Volume: 1ml/ampule

Standard Herbicide mix Acifluorfen 1ml/ampule. Standard Herbicide mix Acifluorfen, Cas number: 50594-66-6, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 month, Volume: 1ml/ampule

Standard Herbicide mix Dalapon (2,2-dichloropropionic acid) 1ml/ampule. Standard Herbicide mix Dalapon (2,2-dichloropropionic acid), Cas number: 75-99-0, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 month, Volume: 1ml/ampule

Standard Pesticide mix a-BHC 1ml/ampule. Standard Pesticide mix a-BHC, Cas number: 319-84-6, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix Aldrin 1ml/ampule. Standard Pesticide mix Aldrin, Cas number: 309-00-2, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix Alachlor 1ml/ampule. Standard Pesticide mix Alachlor, Cas number: 15972-60-8, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix 4,4'-DDE 1ml/ampule. Standard Pesticide mix 4,4'-DDE, Cas number: 72-55-9, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide mix 4,4'-DDD 1ml/ampule. Standard Pesticide mix 4,4'-DDD, Cas number: 72-54-8, Concentration: 1,000 ug/mL in methanol, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Pesticide Kit 508.1, Contains: Performance Check Mix, Internal Standard Mix, Surrogate Mix, GC Degradation Check Mix, Calibration Mix no.1, Calibration Mix no.2, Calibration Mix no.3, Concentration: Contains 1 mL each of these mixtures, shelf life: 6 months

Standard Calibration Mix no.3 508.1 1ml/ampule. Standard Calibration Mix no.3 508.1, 8 components, Concentration: 500 ug/mL each in ethyl acetate, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Calibration Mix no.2 508.1 1ml/ampule. Standard Calibration Mix no.2 508.1, 11 components, Concentration: 500 ug/mL each in ethyl acetate, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Calibration Mix no.1 508.1 1ml/ampule. Standard Calibration Mix no.1 508.1, 17 components, Concentration: 500 ug/mL each in ethyl acetate, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard GC Degradation Check Mix 508.1 1ml/ampule. Standard GC Degradation Check Mix 508.1, Contains: 4,4'-DDT, Endrin, Concentration: 100 ug/mL each in ethyl acetate, Minimum shelf life: 6 months, Volume: 1ml/ampule

Standard Surrogate 508.1 1ml/ampule. Standard Surrogate 508.1, 4,4'-Dibromobiphenyl, Cas number: 92-86-4, Concentration: 500 ug/mL in ethyl acetate, Minimum shelf life: 6 months, Volume: 1ml/ampule

Internal Standard 508.1 1ml/ampule. Internal Standard 508.1, Pentachloronitrobenzene, Cas number: 82-68-8, Concentration: 100 ug/mL in ethyl acetate, Minimum shelf life: 6 months, Volume: 1ml/ampule

8260 MegaMix Calibration Mix (76 components), Restek - 30633, 1 ml/Ampule, 8260 MegaMix Calibration Mix

Vydac 214TP 5um C4 Guard Kit (for 3.0-G-4.6mm id columns) (Includes holder (P/N: 80101/N), coupler (HIG081) and 1 guard cartridge)

Genesis 4um C8 Guard (for 3.0-G-4.6mm id columns).

Genesis 4um C18 Guard (for 3.0-G-4.6mm id columns).

Column Frit Lrc SPE 10Um PE.

Vydac Column 250x4.6mm. Vydac Column, Particle size: 5um, Phase: Cyano, Chromatographic Properties: Extremely stable, long life and reproducible, Application: Ideal for basic drug analysis, High purity silica, Excellent column stability, Dimension: 250x4.6mm

Genesis Column 150x4.6mm. Genesis Column, Particle size: 4um, Phase: AQ, Chromatographic Properties: First generation polymeric C18 phase with unique selectivity, Application: Small polypeptides 4-5K MW, enzymatic digest fragments, natural and synthetic peptides, Dimension: 150x4.6mm

Scott/Air Liquide Transportable Pure Gases and Mixtures 14 l. Scott/Air Liquide Transportable Pure Gases/Mixtures, Pressure: 300 psig (21 bar), for purging or calibrating to multicomponent mixes, Carbon monoxide, carbon dioxide, hydrogen, and oxygen in nitrogen (1% each), Shelf Life: 3yr, Size: 14 L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48 l. Scott/Air Liquide Transportable Pure Gases and Mixtures, Pressure: 300 psig (21 bar), for purging or calibrating to multicomponent mixes, ideal for peak identification, Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Size: 48 L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14l. Scott/Air Liquide Transportable Pure Gases/Mixtures, Pressure: 300 psig (21 bar), for purging or calibrating to multicomponent mixes, Carbon monoxide, carbon dioxide, hydrogen, and oxygen in nitrogen (0.5% each), Shelf Life: 3yr, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14 liter. Scott/Air Liquide Transportable Pure Gases and Mixtures, Oxygen, Shelf Life: 3 yr, Grade: 99.60%, from pure gases for purging or calibrating to multicomponent mixes, Pressure: 240 psig (17 bar), Dimensions: 7.6 x 28 cm, Size: 14 liter

TO-14A Aromatics Mix 104 liter. TO-14A Aromatics Mix, (14 components), Shelf Life: 1years, Concentration in Solvent and Volume: 1 ppm in nitrogen, 104 liters at 1,800 psi, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Aluminum construction, Dimension: 8 x 24 cm, Size: 104 liter

TO-14A Aromatics Mix 104 liter. TO-14A Aromatics Mix, (14 components), Shelf Life: 1years, Concentration in Solvent and Volume: 100 ppb in nitrogen, 104 liters at 1,800 psi, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-10%, Aluminum construction, Dimension: 8 x 24 cm, Size: 104 liter

Refinery Gas Standard Number 1 7.6 x 24 cm. Refinery Gas Standard Number 1 (21 components), Concentration in Solvent and Volume: mole, 5.2 L at 70 psig, Grade: Blend tolerance: +/- 2%; Analytical accuracy: +/- 2%, three mixes with varying C5 unsaturates or extended C6+ components, Size: 7.6 x 24cm

Refinery Gas Standard Number 5 7.6 x 24 cm. Refinery Gas Standard Number 5 (26 components), Concentration in Solvent and Volume: mole, 4.6 L at 60 psig, Grade: Blend tolerance: +/- 2%; Analytical accuracy: +/- 2%, three mixes with varying C5 unsaturates or extended C6+ components. Size: 7.6 x 24cm

Refinery Gas Standard Number 2 7.6 x 24 cm. Refinery Gas Standard Number 2 (27 components), Concentration in Solvent and Volume: mole, 4.9 L at 60 psig, Grade: Blend tolerance: +/- 2%; Analytical accuracy: +/- 2%, three mixes with varying C5 unsaturates or extended C6+ components, Size: 7.6 x 24cm

Natural Gas Standard Number 2 7.6 x 24 cm. Natural Gas Standard Number 2 (10 components), Shelf Life: 1 yr, Concentration in Solvent and Volume: mole, 13.16 L at 200 psig, Grade: Blend tolerance: +/- 2%; Analytical accuracy: +/- 2%, Ideal Heating Value (Dry BTU/SCF): 1142 gross, Size: 7.6 x 24 cm

Natural Gas Standard Number 1 7.6 x 24 cm. Natural Gas Standard Number 1 (10 components), Shelf Life: 1 yr, Concentration in Solvent and Volume: mole, 13.16 L at 200 psig, Grade: Blend tolerance: +/- 2%; Analytical accuracy: +/- 2%, Ideal Heating Value (Dry BTU/SCF): 1048 gross, Size: 7.6 x 24 cm

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, C1-C6 n-Paraffins: methane, ethane, propane, butane, pentane, hexane in helium (100 ppm each), Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Shelf Life: 3 yr, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14 liter. Scott/Air Liquide Transportable Pure Gases and Mixtures, Oxygen in nitrogen (6%), for purging or calibrating to multicomponent mixes, Shelf Life: 3 years, Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Size: 14 liter

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, from pure gases for purging or calibrating to multicomponent mixes, Oxygen in nitrogen (2%), Shelf Life: 3 yr, Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, from pure gases for purging or calibrating to multicomponent mixes, Carbon dioxide, Grade: 99.80%, Shelf Life: 3 yr, Pressure: 300 psig (21 bar), Dimensions: 10.2 x 41 cm, Size: 48L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14 liter. Scott/Air Liquide Transportable Pure Gases and Mixtures, Carbon dioxide, for purging or calibrating to multicomponent mixes, Grade: 99.80%, Shelf Life: 3 years, Pressure: 240 psig (17 bar), Dimensions: 7.6 x 28 cm, Size: 14 liter

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Air, zero, Shelf Life: 3 yr, Grade: THC 1 ppm, from pure gases for purging or calibrating to multicomponent mixes, Pressure: 240 psig (17 bar), Dimensions: 7.6 x 28 cm, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, for purging or calibrating to multicomponent mixes, C2-C6 Olefins: ethylene, propylene, 1-butene, 1-pentene, 1-hexene in nitrogen (100 ppm each), Shelf Life: 3 yr, Size: 48L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, for purging or calibrating to multicomponent mixes, Oxygen in helium (100 ppm), Grade: Blend tolerance: +/- 10%, Analytical accuracy: +/- 5%, Shelf Life: 3 years, Size: 14 L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, for purging or calibrating to multicomponent mixes, Hydrogen in nitrogen (1%), Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Pressure: 300 psig (21 bar), Size: 48L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, for purging or calibrating to multicomponent mixes, Hydrogen in nitrogen (1%), Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Pressure: 240 psig (17 bar), Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, for purging or calibrating to multicomponent mixes, Nitrogen in helium (100 ppm), Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Pressure: 240 psig (17 bar), Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Methane in nitrogen (100 ppm), for purging or calibrating to multicomponent mixes, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Shelf Life: 3years, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14 L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Ethylene in helium (100 ppm), Grade: Blend tolerance: +/- 10%; Analytical accuracy: +/- 5%, for purging or calibrating to multicomponent mixes, Shelf Life: 3 years, Size: 14 L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Nitrous oxide in nitrogen (1 ppm), Shelf Life: 3 years, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, for purging or calibrating, Pressure: 240 psig (17 bar), Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, 1,3-Butadiene in nitrogen (10 ppm), from pure gases for purging or calibrating to multicomponent mixes, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Size: 14L

TO-15 65 Component Mix 104L. TO-15 65 Component Mix, Shelf Life: 1 yr, Concentration in Solvent and Volume: 1 ppm in nitrogen, 104 liters at 1,800 psi, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Aluminum construction, high-quality air monitoring gas calibration standards, Size: 104L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, C1-C6 n-Paraffins: methane, ethane, propane, butane, pentane, hexane in nitrogen (15ppm each), Grade: Blend tolerance: +/-20%; Analytical accuracy: +/-10%, Shelf Life: 3yr, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Methane, ethane, ethylene, acetylene, propane, propylene, n-butane, propyne in nitrogen (15 ppm each), Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Size: 48L

TO-15 Subset 25 Component Mix 104L. TO-15 Subset 25 Component Mix, high-quality air monitoring gas calibration standards,Concentration in Solvent and Volume: 1 ppm in nitrogen, 104 liters at 1,800 psi, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Aluminum construction, Size: 104L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Methane in helium (100 ppm), Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Pressure: 240 psig (17 bar), for purging or calibrating to multicomponent mixes, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Hydrogen in helium (100 ppm), Shelf Life: 3 years, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Pressure: 240 psig (17 bar), Dimensions: 7.6 x 28 cm, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Carbon dioxide in helium (100 ppm), Shelf Life: 3 Years, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Pressure: 240 psig (17 bar), Dimensions: 7.6 x 28 cm, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Vinyl chloride in nitrogen (10 ppm), Shelf Life: 3 Years, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Pressure: 300 psig (21 bar), Dimensions: 10.2 x 41 cm, Size: 48L

TO-14A 41 Component Mix 104L. TO-14A 41 Component Mix, Shelf Life: 1 yr, high-quality air monitoring gas calibration standards, Concentration in Solvent: 100 ppb in nitrogen, 104 liters at 1,800 psi, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-10%, Aluminum construction, Size: 104L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, C1-C6 n-Paraffins: methane, ethane, propane, butane, pentane, hexane in nitrogen (100ppm each), Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Shelf Life: 3yr, Size: 48L

Scott/Air Liquide Transportable Pure Gases/Mixtures 14L. Scott/Air Liquide Transportable Pure Gases/Mixtures, C1-C6 n-Paraffins: methane, ethane, propane, butane, pentane, hexane in nitrogen (100 ppm each), Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Shelf Life: 3 yr, Size: 14 liter

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Hydrogen in nitrogen (100 ppm), Shelf Life: 3 Years, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Pressure: 300 psig (21 bar), Dimensions: 10.2 x 41 cm, Size: 48L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, C1-C6 n-Paraffins: methane, ethane, propane, butane, pentane, hexane in helium (1,000 ppm each), Shelf Life: 3yr, Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Size: 48L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, C1-C6 n-Paraffins: methane, ethane, propane, butane, pentane, hexane in helium (1,000 ppm each), Shelf Life: 3 yr, Pressure: 240 psig (17 bar), Dimension: 7.6 x 28 cm, Size: 14L

Scott/Air Liquide Transportable Pure Gases/Mixtures 14L. Scott/Air Liquide Transportable Pure Gases/Mixtures, Hydrogen in nitrogen (100 ppm), from pure gases for purging or calibrating to multicomponent mixes, Grade: Blend tolerance: +/- 10%; Analytical accuracy: +/- 5%, Shelf Life: 3 yr, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, from pure gases for purging or calibrating to multicomponent mixes, Methane in nitrogen (1%), Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Shelf Life: 3 yr, Size: 48L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, from pure gases for purging or calibrating to multicomponent mixes, Methane in nitrogen (1%), Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Shelf Life: 3 yr, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Air, zero, from pure gases for purging or calibrating to multicomponent mixes, Shelf Life: 3 year, Grade: THC 1 ppm, Pressure: 300 psig (21 bar), Dimension: 10.2 x 41 cm, Size: 48L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Trichloroethylene in nitrogen (10 ppm), Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Shelf Life: 3 Year, Pressure: 300 psig (21 bar), Dimension: 10.2 x 41cm, Size: 48L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Trichloroethylene in nitrogen (10 ppm), from pure gases for purging or calibrating to multicomponent mixes, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5% Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Carbon monoxide (7%), carbon dioxide (15%), and oxygen (5%) in nitrogen, Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Shelf Life: 3 yr, Pressure: 240 psig, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Carbon monoxide, carbon dioxide, hydrogen/oxygen in nitrogen (1% each), Shelf Life: 3yrs, Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Pressure: 300 psig, Size: 48L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Vinyl chloride in nitrogen (1,000 ppm), Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Shelf Life: 3 yr, Pressure: 240 psig (17 bar), Dimensions: 7.6 x 28 cm, Size: 14L

Natural Gas Standard Number 3 (10 components), Shelf Life: 1 year, Concentration in Solvent and Volume: Mole, 5.5 L at 75 psig, Grade: Blend tolerance: +/- 2%, Analytical accuracy: +/- 2%, Ideal Heating Value (Dry BTU/SCF): 1317 gross, Dimension: 7.6 x 24 cm

Ozone Precursor Mixture/PAMS 104L. Ozone Precursor Mixture/PAMS, (57 components), high-quality air monitoring gas calibration standards, Concentration in Solvent: 1 ppm in nitrogen, 104 liters at 1,800 psi, Shelf Life: 1 yr, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Size: 104L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14 L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Argon, Grade: 99.995%, Shelf Life: 3 years, Pressure: 240 psig (17 bar), from pure gases for purging or calibrating to multicomponent mixes, Dimension: 7.6 x 28 cm, Size: 14 l

Scott/Air Liquide Transportable Pure Gases and Mixtures 14 L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Pressure: 240 psig (17 bar), from pure gases for purging or calibrating to multicomponent mixes, which are ideal for peak identification work, Shelf Life: 3 years, Size: 14 L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Methane, Grade: 99.00%, Pressure: 240 psig (17 bar), for purging or calibrating to multicomponent mixes, which are ideal for peak identification work, Dimension: 7.6x28 cm, Size: 14L

TO-14A Internal Standard/Tuning Mix 104 liter. TO-14A Internal Standard/Tuning Mix (4 components), high-quality air monitoring gas calibration standards, Concentration in Solvent: 1 ppm in nitrogen, 104 liters at 1,800 psi, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Size: 104L

TO-14A 43 Component Mix 104L. TO-14A 43 Component Mix (43 components), high-quality air monitoring gas calibration standards, Concentration in Solvent and Volume: 1 ppm in nitrogen, 104 liters at 1,800 psi, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Shelf Life: 1 yr, Size: 104L

TO-14A 41 Component Mix 104L. TO-14A 41 Component Mix (41 components), high-quality air monitoring gas calibration standards, Concentration in Solvent and Volume: 1 ppm in nitrogen, 104 liters at 1,800 psi, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, Shelf Life: 1 yr, Size: 104L

TO-14A Calibration Mix 104L. TO-14A Calibration Mix (39 components), Concentration in Solvent and Volume: 1 ppm in nitrogen, 104 liters at 1,800 psi, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-5%, high-quality air monitoring gas calibration standards, Shelf Life: 1 yr, Size: 104L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14 l. Scott/Air Liquide Transportable Pure Gases and Mixtures, Hydrogen, Shelf Life: 3 Year, Grade: 99.99%, Pressure: 240 psig (17 bar), for purging or calibrating to multicomponent mixes, ideal for peak identification work, Size: 14 l

Scott/Air Liquide Transportable Pure Gases/Mixtures 14 l. Scott/Air Liquide Transportable Pure Gases/Mixtures, Branched Paraffins: 2,2-dimethylbutane, 2,2-dimethylpropane, isobutane, 2-methylbutane, 2-methylpentane, 3-methylpentane in nitrogen (15 ppm each), Pressure: 240 psig (17 bar), Size: 14L

TO-14A 43 Component Mix 104L. TO-14A 43 Component Mix (43 components), high-quality air monitoring gas calibration standards, Concentration in Solvent and Volume: 100 ppb in nitrogen, 104 liters at 1,800 psi, Grade: Blend tolerance: +/-10%; Analytical accuracy: +/-10%, Shelf Life: 1 yr, Size: 104L

Scott/Air Liquide Transportable Pure Gases and Mixtures 14 l. Scott/Air Liquide Transportable Pure Gases and Mixtures, for purging or calibration, C2-C6 Olefins: ethylene, propylene, 1-butene, 1-pentene, 1-hexene in nitrogen (100 ppm each), Pressure: 240 psig (17 bar), Shelf Life: 3 yr, Size: 14L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Carbon monoxide, carbon dioxide, methane, ethane, ethylene, and acetylene in nitrogen (1% each), Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, Shelf Life: 3yr, Size: 48L

Scott/Air Liquide Transportable Pure Gases and Mixtures 48L. Scott/Air Liquide Transportable Pure Gases and Mixtures, Pressure: 300 psig (21 bar), for purging or calibrating to multicomponent mixes, ideal for peak identification, Grade: Blend tolerance: +/-10%, Analytical accuracy: +/-5%, Size: 48 L

Low Pressure Drop Liner, Deactivation: Base Wool, 4mm x 6.3 x 78.5mm, for agilent GCs.

Liner 54 mm. Liner,Geometry:Precision with Top Taper, Liner ID: 3.4 mm, Length:54 mm, OD: 5.0 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass,for Bruker/Varian GCs equipped with 1078/1079 inlets

Liner 95mm. Liner, Geometry:Uniliner, ID: 3.5 mm, Length:95 mm, OD: 5.0 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Liner 92.1 mm. Liner, Geometry:Straight, Liner ID: 4.0 mm, Length:92.1 mm, OD: 6.2 mm, Deactivation:Intermediate Polarity (IP), Packing:CarboFrit, Material:Borosilicate Glass, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Laminar Cup, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Siltek, Packing:Deactivated Wool, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Straight, ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation:Siltek, Packing:Deactivated Wool, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 95mm. Liner, Geometry:Straight, Liner ID: 3.5 mm, Length:95 mm, OD: 5.0 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Liner 105mm. Liner, Geometry:Straight, Liner ID: 1.0 mm, Length:105 mm, OD: 8.0 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Liner 120mm. Liner,Geometry:Straight, Liner ID: 2.0 mm, Length:120 mm, OD: 2.75 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Thermo TRACE GCs equipped with PTV inlets

Liner 78.5mm. Liner, Geometry:Straight, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 105mm. Liner, Geometry:Straight, Liner ID: 5.0 mm, Length:105 mm, OD: 8.0 mm, Deactivation:Siltek, Packing:Deactivated Wool, Material:Metal, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Cup splitter liner 4mm x 6.3 x 78.5 for Agilent GCs Siltek Deactivation, with CarboFrit.

Open-top uniliner liner 0.32 and 0.53mmID Column ID Siltek Deactivation, with Deactivation Wool.

Liner 95mm. Liner, Geometry:Straight, Liner ID: 3.5 mm, Length:95 mm, OD: 5.0 mm, Deactivation:Base Deactivated, Packing:Base Deactivated Wool, Material:Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Straight, Liner ID: 1.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Base Deactivated, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Baffle Liner, 2mm x 2.75 x 120 forThermo GCs Siltek Deactivation.

Liner 105mm. Liner, Geometry:Straight, Liner ID: 5.0 mm, Length:105 mm, OD: 8.0 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Liner 78.5mm. Liner, Geometry:Recessed Single Taper, ID: 4.0 mm, Length:78.5 mm, OD: 6.5 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 78.5 mm. Liner, Geometry:Straight, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.5 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Cyclosplitter 4mm x 6.3 x 78.5 for Agilent GCs Base Deactivation.

Liner 71mm. Liner,Geometry:Straight, Liner ID: 2.0 mm, Length:71 mm, OD: 3.0 mm, Deactivation:Siltek, Packing:Deactivated Wool, Material:Borosilicate Glass, for Agilent GCs equipped with CIS4/PTV inlets

Open Liner, 3mm x 5.0mm x 80mm, for ATAS GCs IP Deactivation.

Liner 92.1 mm. Liner, Geometry:Straight, Liner ID: 4.0 mm, Length:92.1 mm, OD: 6.2 mm, Deactivation:Siltek, Material:Borosilicate Glass, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Straight/SPME, Liner ID: 0.75 mm, Length:78.5 mm, OD: 6.35 mm, Deactivation:Base Deactivated, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

DI Glass Insert 3.0mm. DI Glass Insert, Instrument:for Agilent 5890 Packed Column GC, OD: 3.0 mm, Tolerances closely controlled, Can be removed from the septum nut weldment

Liner 95mm. Liner,Geometry:Drilled Uniliner (hole near top), Liner ID: 3.5 mm, Length:95 mm, OD: 5.0 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Liner 78.5 mm. Liner, Geometry:Cyclo, Liner ID: 5.2 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Siltek, Material:Metal, for Agilent GCs equipped with split/splitless inlets

Liner 86.2mm. Liner, Geometry:Straight, ID: 2.0 mm, Length: 86.2 mm, OD: 4.0 mm, Deactivation:Siltek, Packing:Deactivated Wool, Material:Borosilicate Glass, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Precision, Liner ID: 4.0 mmLent 210-4004-5; SGE 092002, Length:78.5 mm, OD: 6.3 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 85mm. Liner, Geometry:Uniliner with Top Taper / On-Column, Liner ID: 3.5 mm, Length:85 mm, OD: 5 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Agilent 1/4on Packed, Injection Ports

Liner 54mm. Liner, Geometry:Straight, ID: 0.75 mm, Length: 54 mm, OD: 5.0 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Bruker/Varian GCs equipped with 1078/1079 inlets

Liner 92.1mm. Liner,Geometry:Straight, Liner ID: 1.0 mm, Length:92.1 mm, OD: 6.2 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Straight, ID: 2.0 mm, Length:78.5 mm, OD: 6.5 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Thermo Scientific GCs

Liner 78.5mm. Liner, Geometry:Drilled Uniliner (hole near top), Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Siltek, Packing:Deactivated Wool, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Laminar Cup, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 95mm. Liner, Geometry:Precision, Liner ID: 3.5 mm, Length:95 mm, OD: 5.0 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Liner 74mm. Liner, Geometry:Straight/SPME, Liner ID: 0.75 mm, Length:74 mm, OD: 6.3 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Bruker/Varian GCs equipped with 1075/1077 inlets

Liner 120mm. Liner,Geometry:Straight, Liner ID: 2.0 mm, Length:120 mm, OD: 2.75 mm, Deactivation:Base Deactivated, Material:Borosilicate Glass, for Thermo TRACE GCs equipped with PTV inlets

Liner 54 mm. Liner, Geometry:Top Taper, Liner ID: 3.4 mm, Length:54 mm, OD: 5.0 mm, Deactivation:Siltek, Material:Borosilicate Glass,for Bruker/Varian GCs equipped with 1078/1079 inlets

Liner 78.5mm. Liner, Geometry:Precision Low Pressure Drop, ID: 2.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass, for Bruker/Varian GCs equipped with 1177 inlets

Liner 120mm. Liner, Geometry:Straight, Liner ID: 2.0 mm, Length:120 mm, OD: 2.75 mm, Deactivation:Siltek, Material:Metal, for Thermo TRACE GCs equipped with PTV inlets

Liner 120mm. Liner, Geometry:Straight, Liner ID: 1.0 mm, Length:120 mm, OD: 2.75 mm, Deactivation:Siltek, Material:Metal, for Thermo TRACE GCs equipped with PTV inlets

Recessed Double Gooseneck, Liner, 4mm x 6.5 x 78.5 for Agilent GCs Siltek Deactivation.

Double Taper Inlet Liner, Injector Liner for GCs equipped with 1177 inlets, Double Gooseneck Splitless, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass

Single Taper Inlet Liner with carbofrit. Single Taper Inlet Liner, Gooseneck Splitless Liner, with Carbofrit, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Straight Inlet Liner (SPI Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 0.8mm, Length: 54 mm, Outside (OD) diameter: 4.6 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Drilled Uniliner Liner. Drilled Uniliner Inlet Liner with Hole near Bottom and Top Taper, Double Gooseneck, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Straight/SPME Inlet Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 0.75 mm, Length: 78.5 mm, Outside (OD) diameter: 6.35 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Uniliner Inlet Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 1.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Cup Inlet Liner (Cup Splitter Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass

Cup Inlet Liner with carbofrit (Cup Splitter Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP) Deactivated, Material: Borosilicate Glass

Straight Inlet Liner (Splitless Liner) with carbonfrit, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek Deactivated (reflective coating), Material: Borosilicate Glass,

Cyclo Single Taper Inlet Liner, Single Gooseneck, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 5.2 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3 mm, Deactivation: Siltek, Material: Metal

Straight Inlet Liner with carbofrit. Straight Inlet Liner, Split/Splitless Liner, with CarboFrit, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 3.5 mm, Length: 95 mm, OD: 5 mm, Deactivation: Intermediate Polarity (IP) Deactivated, Material: Borosilicate Glass

Drilled Uniliner Inlet Liner with Hole near Bottom, Injector Liner for GCs equipped with 1177 inlets, Liner Inside (ID) Diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) Diameter: 6.3mm, Deactivation: Intermediate Polarity(IP) deactivated, Material: Borosilicate Glass

Straight Inlet Liner (Splitless Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.5 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass,

Straight Inlet Liner (Splitless Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek Deactivated (reflective coating, excellent resistivity to samples), Material: Borosilicate Glass,

Straight Inlet Liner with Glass wool. Straight Inlet Liner (Split liner), with carbofrit, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 120 mm, OD: 2.75 mm, Deactivation: Intermediate Polarity (IP) Deactivated, Material: Borosilicate Glass

Frit Inlet Liner with Top Taper, Injector Liner for GCs equipped with 1177 inlets, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP), Packing: Glass Frit, Material: Borosilicate Glass

Zero Dilution Outer Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 2.5 mm, Length: 90 mm, Outside (OD) diameter: 6.2 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Mini-Lam Inlet Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Cyclo Double Taper Inlet Liner (Cyclo Double Gooseneck), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 92.1 mm, OD: 6.2 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Cup Inlet Liner (Cup Splitter Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 92.1 mm, OD: 6.2 mm, Deactivation: Siltek Deactivated, Packing: Deactivated Wool, Material: Borosilicate Glass

Straight Inlet Liner (Splitless Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek Deactivated, Packing: Deactivated Wool, Material: Borosilicate Glass, reflective coating

Low Pressure Drop Inlet Liner. Low Pressure Inlet Drop Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek Deactivated, Packing: Deactivated Wool, Material: Borosilicate Glass

Straight Inlet Liner, Split/splitless liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 2.0 mm, Length: 86.2 mm, Outside (OD) diameter: 4.0 mm, Deactivation: Siltek, Material: Borosilicate Glass

Straight Inlet Liner, Split/Splitless Liner, with CarboFrit, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 3.5 mm, Length: 95 mm, Outside (OD) diameter: 5 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Base-Deactivated Glass Wool 10g. Base-Deactivated Glass Wool, Fused silica wool, Ideal for amines and other basic compounds, Size: 10g

Baffled Inlet Liner, Injector Liner for GCs equipped with PTV inlets, Liner Inside (ID) diameter: 2.0 mm, Length: 120 mm, Outside (OD) diameter: 2.75 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Straight Inlet Liner with Wool, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.5 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Quartz

Single Taper Inlet Liner with CarboFrit, Injector Liner for GCs equipped with 1177 inlets, Gooseneck splitless, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Packing: CarboFrit, Material: Borosilicate Glass

Cyclo Inlet Liner with carbofrit. Cyclo Inlet Liner with wool, carbofrit (Cyclosplitter Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Base Deactivated, Packing: Deactivated Wool, Material: Borosilicate Glass

On-Column Inlet Liner, Injector Liner for GCs equipped with CIS4/PTV inlets, Liner Inside (ID) diameter: 1.7 mm, Length: 71 mm, Outside (OD) diameter: 3.0 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Straight Inlet Liner (Splitless Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, No wool

Frit Inlet Liner with Top Taper, Injector Liner for GCs equipped with 1078/1079 inlets, Liner Inside (ID) diameter: 3.4 mm, Length: 54 mm, Outside (OD) diameter: 5.0 mm, Deactivation: Siltek, Packing: Glass Frit, Material: Borosilicate Glass

Cyclo Double Taper Inlet Liner (Cyclo Double Gooseneck), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 92.1 mm, OD: 6.2 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass

Straight Inlet Liner 86.2 mm. Straight Inlet Liner with Wool, Length: 86.2 mm, OD: 4.0 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Borosilicate Glass, for PerkinElmer Gas chromatography equipped with PSS Inlet

Double Taper Inlet Liner 78.5 mm. Double Taper Inlet Liner, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

Precision Inlet Liner 78.5 mm. Precision Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Borosilicate Glass, for Bruker/Varian Gas chromatography equipped with 1177 inlets

Single Taper Inlet Liner 78.5 mm. Single Taper Inlet Liner with CarboFrit, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Intermediate Polarity (IP), Packing: CarboFrit, Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

Straight Inlet Liner 78.5 mm. Straight Inlet Liner, Liner ID: 5.2 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek, Material: Metal, for Agilent GCs equipped with split/splitless inlets

Single Taper Inlet Liner 78.5 mm. Single Taper Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Borosilicate Glass, for Bruker/Varian GCs equipped with 1177 inlets

Precision Inlet Liner 105 mm. Precision Inlet Liner with Top Taper with Wool, Liner ID: 5.0 mm, Length: 105 mm, OD: 8.0 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with CarboFrit, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP), Packing: CarboFrit, Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

Straight Inlet Liner 1.0 mm. Straight Inlet Liner, Liner ID: 1.0 mm, Length: 86.2 mm, OD: 4.0 mm, Deactivation: Siltek, Material: Borosilicate Glass, for PerkinElmer GCs equipped with PSS Inlet

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with Wool, Liner ID: 4.0 mm, Length:78.5 mm, OD:6.3 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Borosilicate Glass, for Bruker/Varian Gas chromatography equipped with 1177 inlets

Split Precision Liner 4mm x 6.3 x 78.5 for Agilent Gas chromatography Siltek Deactivated.

Straight Inlet Liner 93 mm. Straight Inlet Liner, Liner ID: 1.7 mm, Length: 93 mm, OD: 3.0 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass, for Agilent 1/4in Packed Injection Ports

Precision Low Pressure Drop Inlet Liner 78.5 mm. Precision Low Pressure Drop Inlet Liner, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Straight Inlet Liner 95 mm. Straight Inlet Liner, Liner ID: 3.5 mm, Length: 95 mm, OD: 5.0 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Straight Inlet Liner 120 mm. Straight Inlet Liner with CarboFrit, Liner ID: 2.0 mm, Length: 120 mm, OD: 2.75 mm, Deactivation: Siltek, Packing: CarboFrit, Material: Borosilicate Glass, for Thermo TRACE GCs equipped with PTV inlets

Straight Inlet Liner 93 mm. Straight Inlet Liner, Liner ID: 1.7 mm, Length: 93 mm, OD: 3.0 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent 1/4in Packed Injection Ports

Top Taper Inlet Liner 54 mm. Top Taper Inlet Liner with CarboFrit, Liner ID: 3.4 mm, Length: 54 mm, OD: 5.0 mm, Deactivation: Siltek, Packing: CarboFrit, Material: Borosilicate Glass, for Bruker/Varian Gas chromatography equipped with 1078/1079 inlets

Single Taper Inlet Liner 78.5 mm. Single Taper Inlet Liner, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Bruker/Varian Gas Chromatography equipped with 1177 inlets

Recessed Single Taper Inlet Liner 78.5 mm. Recessed Single Taper Inlet Liner, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Single Taper Inlet Liner 105 mm. Single Taper Inlet Liner with CarboFrit, Liner ID: 5.0 mm, Length: 105 mm, OD: 8.0 mm, Deactivation: Intermediate Polarity (IP), Packing: CarboFrit, Material: Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Cyclo Double Taper Inlet Liner 78.5 mm. Cyclo Double Taper Inlet Liner, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Cyclo Double Taper Inlet Liner 78.5 mm. Cyclo Double Taper Inlet Liner, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Straight Inlet Liner 92.1 mm. Straight Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 92.1 mm, OD: 6.2 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Borosilicate Glass, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets

Single Taper Inlet Liner 78.5 mm. Single Taper Inlet Liner, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with CarboFrit, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek, Packing: CarboFrit, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with CarboFrit, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Intermediate Polarity (IP), Packing: CarboFrit, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Straight Inlet Liner 120 mm. Straight Inlet Liner with Wool, Liner ID: 2.0 mm, Length:120 mm, OD: 2.75 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Borosilicate Glass, for Thermo TRACE GCs equipped with PTV inlets

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Borosilicate Glass, for Bruker/Varian GCs equipped with 1177 inlets

Laminar Cup Inlet Liner 78.5 mm. Laminar Cup Inlet Liner, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Uniliner Inlet Liner 78.5 mm. Uniliner Inlet Liner with Hole near Top and Top Taper, Liner ID: 4.0 mm, Length: 78.5 mm, Outer Diameter: 6.3 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Uniliner Inlet Liner 85 mm. Uniliner Inlet Liner, Liner ID:3.5 mm, Length: 85 mm, OD: 5 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, for Agilent 1/4in Packed Injection Ports

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, Split inlet with Deactivated Wool, Deactivation: Siltek, 6.3 mm, Material: Borosilicate Glass, universal, for use with Agilent 7673 autosampler

Cup Inlet Liner 78.5 mm. Cup Inlet Liner with Wool, Liner ID:4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Top Taper Inlet Liner 54 mm. Top Taper Inlet Liner with Wool, Liner ID: 3.4 mm, Length: 54 mm, Outer Diameter: 5.0 mm, Deactivation: Base Deactivated, Packing: Base Deactivated Wool, Material: Borosilicate Glass, for Bruker/Varian GCs equipped with 1078/1079 inlets

Fritted Taper Inlet Liner 80 mm. Fritted Taper Inlet Liner, Liner ID: 3.0 mm, Length: 80 mm, OD: 5.0 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, for ATAS OPTIC 2 and 3 inlets

Baffled Inlet Liner 71 mm. Baffled Inlet Liner, Liner ID: 1.5 mm, Length: 71 mm, OD: 3.0 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent GCs equipped with CIS4/PTV inlets

Straight Inlet Liner 92.1 mm. Straight Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 92.1 mm, Outer Diameter: 6.2 mm, Deactivation: Base Deactivated, Packing: Base Deactivated Wool, Material: Borosilicate Glass, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, Outer Diameter: 6.5 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Quartz, for Agilent GCs equipped with split/splitless inlets

Single Taper Inlet Liner 3.0 mm. Single Taper Inlet Liner, Liner ID: 3.0 mm, Length: 105 mm, OD: 8.0 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Double Taper Inlet Liner 92.1 mm. Double Taper Inlet Liner, Liner Inner Diameter: 4.0 mm, Length: 92.1 mm, Outer Diameter: 6.2 mm, Deactivation: Siltek, Material: Borosilicate Glass, for PerkinElmer Auto SYS and Clarus Gas chromatography equipped with split/splitless inlets

Cup Inlet Liner 78.5 mm. Cup Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Base Deactivated, Packing: Base Deactivated Wool, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Single Taper Inlet Liner 78.5 mm. Single Taper Inlet Liner, with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, Outer diameter: 6.5 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

Replacement CarboFrit Insert Frit, for liner ID 4 mm.

Precision Low Pressure Drop Inlet Liner 78.5 mm. Precision Low Pressure Drop Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Base Deactivated, Packing: Base Deactivated Wool, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Uniliner Inlet Liner 85 mm. Uniliner Inlet Liner with Wool, Liner ID:3.5 mm, Length: 85 mm, OD: 5 mm, Deactivation: Base Deactivated, Packing: Base Deactivated Wool, Material: Borosilicate Glass, for Agilent 1/4in Packed Injection Ports

Single Taper Inlet Liner 5.2 mm. Single Taper Inlet Liner, Liner ID: 5.2 mm, Length: 78.5 mm, Outer Diameter: 6.3 mm, Deactivation: Siltek, Material: Metal, for Agilent Gas Chromatography equipped with split/splitless inlets

Drilled Uniliner 78.5 mm. Drilled Uniliner (hole near top) with Top Taper, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, for Bruker/Varian Gas chromatography equipped with 1177 inlets

N (Cemented Needle) Syringe, Point Style 5, 500 uL, Model 750. Model: 750. Volume: 500 uL. Specifications: Scale length, cm: 6. Total scale divisions: 50. Major graduations: 50. Minor graduations: 10. Max. temp., [degree]C([degree]F): 50(122). Min. temp., [degree]C([degree]F): 10(50). Max.

Model 701N (pt 5) Syringe for GC Instrumentation, 10uL. Model: 701N (pt 5). Volume: 10 uL. Instrument: CTC A200SE. Manufacturer: Leap Technologies.

Super Syringe. PTFE luer lock,.5 L. Model: S0500. Volume:.5 L. For air sampling, preparing gas standards, calibrating reservoirs, pneumographs and spirometers. Three syringe terminations available.

Super Syringe. PTFE luer lock, 1 L. Model: S1000. Volume: 1 L. For air sampling, preparing gas standards, calibrating reservoirs, pneumographs and spirometers. Three syringe terminations available.

2,000 ���G/Ml Each In P&T Methanol, 1 Ml/Ampul.

Replacement O-Rings. 5819-164 Plunger Tip

Hamilton (HV) Plug Valve, HVP, T Flow Path 3-ports. Model: 3-3. Specifications: Dimensions: 3/4 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28. Break Away Torque, Ounces Inches: 10-15.

1000 Series GASTIGHT Fluoropolymer Resin Luer Lock Syringes, Point Style 2. For liquids or gases. Precision-machined fluoropolymer resin plunger tip. For most applications requiring puncturing of a septum. Does not include a needle. Volume: 25mL.

Priming Syringe. For the WATERS 6000, 6000A, 501, 510, 590, 610 and 610E HPLC Pumps, 10 mL. Model: 1010W. Volume: 10mL. Designed for maximum safety with metal flange and hub. Pressure tested to 700 psig. PTFE-tipped plunger.

700 Series MICROLITER Removable Needle Syringe, Point Style 2. For Agilent Autosamplers 7670A, 7671A and 7672A. Used for liquid. Cut at a 22[degree] bevel, tip of the needle slightly bent to prevent septum coring. Stainless steel plunger. 26S gauge. 5.1cm needle. Volume: 10uL.

1000 Series GASTIGHT Syringe. PTFE Luer Lock with Slots, 10 mL. Model: 1010. Volume: 10 mL. Specifications: Scale length, cm: 6. Total scale divisions: 50. Major graduations: 1. Minor graduations:.2. Max. temp., [degree]C([degree]F): 115(239). Min. temp., [degree]C([degree]F): 10(50). Max.

1000 Series GASTIGHT Syringe. PTFE Luer Lock with Slots, 5 mL. Model: 1005. Volume: 5 mL. Specifications: Scale length, cm: 6. Total scale divisions: 50. Major graduations:.5. Minor graduations:.1. Max. temp., [degree]C([degree]F): 115(239). Min. temp., [degree]C([degree]F): 10 (50). Max.

1000 Series GASTIGHT Syringe. PTFE Luer Lock with Slots, 2.5 mL. Model: 1002. Volume: 2.5 mL. Specifications: Scale length, cm: 6. Total scale divisions: 50. Major graduations:.25. Minor graduations:.05. Max. temp., [degree]C([degree]F): 115(239). Min. temp., [degree]C([degree]F): 10(50). Max.

1000 Series GASTIGHT Syringe. PTFE Luer Lock with Slots, 1 mL. Model: 1001. Volume: 1 mL. Specifications: Scale length, cm: 6. Total scale divisions: 50. Major graduations:.1. Minor graduations:.02. Max. temp., [degree]C([degree]F): 115(239). Min. temp., [degree]C([degree]F): 10(50). Max.

SampleLock Syringe, Point Style 2. Ideal for pre-pressurization of gaseous samples for GC analysis and sample spiking. Precision-machined fluoropolymer resin plunger tip and twist valve. Cut at a 22[degree] bevel with a tip that prevents septum coring. Needle length: 5.1cm. Volume: 25mL. 22 gauge.

SampleLock Syringe, Point Style 2. Ideal for pre-pressurization of gaseous samples for GC analysis and sample spiking. Precision-machined fluoropolymer resin plunger tip and twist valve. Cut at 22[degree] bevel with tip that prevents septum coring. Needle length: 5.1cm. Volume: 2.5mL. 22S gauge.

SampleLock Syringe, Point Style 2. Ideal for pre-pressurization of gaseous samples for GC analysis and sample spiking. Precision-machined fluoropolymer resin plunger tip and twist valve. Cut at a 22[degree] bevel with a tip that prevents septum coring. Needle length: 5.1cm. Volume: 1mL. 22 gauge.

SampleLock Syringe, Point Style 2. For pre-pressurization of gaseous samples for GC analysis and sample spiking. Precision-machined fluoropolymer resin plunger tip and twist valve. Cut at a 22[degree] bevel with a tip that prevents septum coring. Needle length: 5.1cm. Volume: 500uL. 22 gauge.

SampleLock Syringe, Point Style 2. For pre-pressurization of gaseous samples for GC analysis and sample spiking. Precision-machined fluoropolymer resin plunger tip, twist valve. Cut at 22[degree] bevel with tip to prevent septum coring. Small bore. Needle length: 5.1cm. Volume: 250uL. 22S gauge.

SampleLock Syringe, Point Style 2. For pre-pressurization of gaseous samples for GC analysis and sample spiking. Precision-machined fluoropolymer resin plunger tip, twist valve. Cut at 22[degree] bevel with tip to prevent septum coring. Small bore. Needle length: 5.1cm. Volume: 100uL. 22S gauge.

SGE Syringe 10 uL. Six Pack, Fixed Needle For Agilent (Hewlett Packard) 7673/7683 Autosampler, Needle is stainless steel, 0.63 mm OD (23 gauge) tapering to 0.47 mm OD (26 gauge) at the tip, 42 mm long w/ cone point style

SGE Syringe, Six Pack of 5uL. Fixed Needle For Agilent (Hewlett Packard) 7673/7683 Autosampler, Needle is stainless steel, 0.63 mm OD (23 gauge) tapering to 0.47 mm OD (26 gauge) at the tip, 42 mm long w/ cone point style

SGE Syringe, 10 uL. Fixed Needle, For Carlo Erba/Fisons, Needle is stainless steel, 0.47 mm OD (26 gauge), 50 mm long with a cone point style

SGE Syringe, 5 uL. Fixed Needle For Carlo Erba/Fisons/CTC, Needle is stainless steel, 0.47 mm OD (26 gauge), 50 mm long w/ cone point style

SGE Syringe, 500 uL. Gas Tight, Fixed 1/4 by 28 UNF threaded termination and special Plunger button For use with the Hitachi LC autosampler

SGE Syringe, 0.5uL. Plunger-in-needle, barrel OD is 8 mm, Removable Needle On Column, Needle is stainless steel, 0.47 mm OD (26 gauge), 70 mm, Cone point style, On Column

SGE Syringe, 2000 uL. Acrylic (Jumbo), second sampling port, Removable Luer Lock, Gas Tight Plunger

Jumbo Syringe. For holding and dispensing large volumes of gas. Made of clear acrylic. The central port is supplied with a Luer lock fitting, and the secondary port enables access to the gas sample for the addition of standards or removal of subsample. The plunger stem is detachable. Volume: 1L.

SGE Syringe, 500 uL. Acrylic (Jumbo), second sampling port, Removable Luer Lock, Gas Tight Plunger

Syringe Valve. V 25/2.5 M-0.63 C Valve.

SGE Syringe, 50 uL. inert fluid path of fluoropolymer resin, Kel-F and borosilica glass, Removable Valve (w/ Luer-Lock fitting), Gas Tight Plunger

SGE Syringe, 25 uL. Diluter/Dispenser version, inert fluid path of fluoropolymer resin, Kel-F and borosilica glass, Removable Valve (w/ Luer-Lock fitting), Gas Tight Plunger

SGE Gas Tight Syringes with Valve, 10 mL. Gas Tight Syringes with Valve, 10 mL.

SGE Syringe, 5 uL. Diluter/Dispenser version, inert fluid path of fluoropolymer resin, Kel-F and borosilica glass, Removable valve (w/ Luer-Lock fitting), Gas Tight Plunger

SGE Syringe, 2.5 uL. Diluter/Dispenser version, inert fluid path of fluoropolymer resin, Kel-F and borosilica glass, Removable Luer Lock, Gas Tight Plunger

SGE Syringe, 1 uL. Diluter/Dispenser version, inert fluid path of fluoropolymer resin, Kel-F and borosilica glass, Removable Luer Lock, Gas Tight Plunger

SGE Syringe, 250 uL. 1/4-28 screw thread, inert fluid path of fluoropolymer resin, Kel-F and borosilica glass, Gas Tight Plunger For a Waters Intelligent Sample Processor

SGE Syringe, 25 uL. 1/4-28 screw thread, Gas Tight Plunger For a Waters Intelligent Sample Processor

SGE Syringe, 10 uL. Removable Needle For use on Shimadzu AOC14, AOC17 & AOC20 Autosampler, Needle is stainless steel, 42 mm long, 23 gauge (0.63 mm OD) with a cone point style

Y Connector. For 1/8 inch OD tubing, 1/4-28 threads, .040 inch thru-hole, with flangeless fittings, PEEK

Cartridge, Back Pressure Regulator, 750 psi (52 bar). Black/Blue, PEEK/Tefzel, for Upchurch Scientific Back Pressure Regulator Holders

Nut, Flangeless. For 1/8 inch OD tubing, 1/4-28 threads, fluoroploymer resin PFA, Natural (10 Pk)

Cross. For 1/16 inch OD tubing 10-32 threads, .05 inch (1.25mm) thru-hole, PEEK with PEEK fingertight fittings

Tee. For 1/16 inch OD tubing 10-32 threads, .05 inch (1.25mm) thru-hole, PEEK with PEEK fingertight fittings

Tubing, PEEK. .005 inch ID x 1/16 inch OD x 50 feet. Red

Tubing, PEEK. .020 inch ID x 1/16 inch OD x 50 feet. Orange

Adapter, Internal 10-32 Threads to External/Male 1/4-28. .040 Thru-Hole, with Nut & Ferrule for 1/16 OD tubing, 316 Stainless Steel

Tubing, 316 Stainless Steel. .030 inch (.75mm) ID x 1/16 inch OD x 1m, white band

Union, Zero Dead Volume, Low Pressure. For 1/8 inch OD tubing, 1/4-28 threads, Tefzel (ETFE) with fluoroploymer resin/Tefzel flangeless fittings

Union, Zero Dead Volume, Low Pressure. For 1/16 inch OD tubing, 1/4-28 threads, Tefzel (ETFE) with fluoroploymer resin/Tefzel flangeless fittings

Filter, Inline, High Pressure, 0.5um Porosity. PEEK

Filter, Inline, High Pressure, 2um Porosity. PEEK

Filter End Fitting, 2um Porosity. PEEK, For A-430 (10 Pk)

Filter, Inline, Low Pressure, 2um Porosity. With 1/4-28 Threads for 1/8��� OD Tubing& Flangeless Fittings, stainless steel Frit. Work best With Fluoropolymer resin of Tefzel Tubing.

Cross. For 1/16 inch OD tubing 1/4-28 threads, .050 inch (1.25mm) thru-hole, PEEK with PEEK fingertight fittings

Adapter, Internal 10-32 Threads to Internal 1/4-28. .040 Thru-Hole, with Nut & Ferrule for 1/16 OD tubing, 316 Stainless Steel

Union. MicroTight, True Zero Dead Volume 6-32 Threads, PEEK with PEEK One-Piece Micro Fingertight Fitting plus Guage Plug

Zic-Chilic 3 Um 100A 15 1Pc. Zic-Chilic (3Um,100A) 150X0.3

Zic-Chilic 3 Um 100A 15 1Pc. Zic-Chilic (3Um,100A) 150X0.1

Zic-Chilic 3 Um 100A Pe 1Pc. Zic-Chilic (3Um,100A) Peek 250X4.6

Zic-Chilic 3 Um 100A Pe 1Pc. Zic-Chilic (3Um,100A) Peek 150X4.6

Zic-Chilic 3 Um 100A Pe 1Pc. Zic-Chilic (3Um,100A) Peek 100X4.6

Zic-Chilic 3 Um 100A Pe 1Pc. Zic-Chilic (3Um,100A) Peek 50X4.6

Zic-Chilic 3 Um 100A Pe 1Pc. Zic-Chilic (3Um,100A) Peek 150X2.1

Zic-Chilic 3 Um 100A Pe 1Pc. Zic-Chilic (3Um,100A) Peek 100X2.1

Zic-Chilic 3 Um 100A Pe 1Pc. Zic-Chilic (3Um,100A) Peek 50X2.1

Zic-Hilic 5 Um 200A 250 1Pc. 250X21.2

Zic-Chilic 3 Um 100A 15 1Pc. 150X1

HIBAR PUROSPHER STAR. RP-18E, 5UM, 250-4 (COMPLETE WITH END FITTINGS) (ODS, C18, HPLC COLUMN, USP L1).

LICHROCART CHIRADEX (BETA). 5UM, 250-4 (NEEDS FITTINGS #14229-736 (CHIRAL,CYCLODEXTRIN, HPLC COLUMN).

LICHROCART CHIRADEX (BETA). 5UM ,4-4 (10 GUARD COLUMNS) (CHIRAL, CYCLODEXTRIN, HPLC GUARD COLUMNS).

FILTER PAPER. Electrophoresis/Blotting, Thick, Grade 237, 20x20cm, 100/pk

Whatmanâ„¢ Cellulose Chromatography Papers, Whatman products (Cytiva) - 3001-917, Sheets

Whatmanâ„¢ Cellulose Chromatography Papers, Whatman products (Cytiva) - 3001-861, Sheets

Whatmanâ„¢ Cellulose Chromatography Papers, Whatman products (Cytiva) - 3001-652, Roll

Whatmanâ„¢ Cellulose Chromatography Papers, Whatman products (Cytiva) - 3001-640, Roll

Whatmanâ„¢ Cellulose Chromatography Papers, Whatman products (Cytiva) - 3001-604, Roll

Whatmanâ„¢ Cellulose Chromatography Papers, Whatman products (Cytiva) - 3001-614, Roll

CELL RECT QUARTZ PK2 40MM - N9302705

COLUMN LICHROSPER 250X4.6MM 5UM ENDCAP - 228724

MICROLITER Syringe for the Perkin-Elmer AutoSystem GC, 5uL. Model: 75ASN/PE. Volume: 5uL. O.D./Length/Point style:.47 mm/2.756/3. Syringes for the Perkin-Elmer AutoSystem GC.

MICROLITER Syringe for the Perkin-Elmer AutoSystem GC, 5uL. Model: 75ASN/PE. Volume: 5uL. O.D./Length/Point style:.63 mm/2.756/3. Syringes for the Perkin-Elmer AutoSystem GC.

Upchurch Scientific® Back Pressure Regulators, IDEX Health & Science - P-764, Replacement Cartridge

Tubing Sleeve, Silica Sealtight. 395um (.015) ID x 1/16 OD x 1.6, Fluoropolymer resin FEP, for connecting 340-380um capillary tubing into standard 10-32 ports (10 Pk)

Tubing, Tefzel (ETFE). .040 inch ID x 1/16 inch OD x 100 feet. Natural

Back Pressure Regulator Assembly. 75 psi (5.2 bar) PEEK Holder with PEEK/Tefzel Cartridge, 1/4-28 Tefzel flangeless fittings for 1/1 inch OD tubing, wrenches

Back Pressure Regulator Assembly, 100 psi (7 bar). with Stainless Steel Holder with PEEK/Tefzel Cartridge, 1/4-28 Delrin/Tefzel Flangeless Fittings for 1/16 OD Tubing

Back Pressure Regulator Assembly, 75 psi (5.2 bar). with Stainless Steel Holder with PEEK/Tefzel Cartridge, 1/4-28 Delrin/Tefzel Flangeless Fittings for 1/16 OD Tubing

Cartridge. Back Pressure Regulator, 500 psi (34 bar) PEEK/Tefzel, Tan/Green, for Upchurch Scientific Back Pressure Regulator Holders

Cartridge. Back Pressure Regulator, 100 psi (7 bar) PEEK/Tefzel, Tan/Red, for Upchurch Scientific Back Pressure Regulator Holders

Back Pressure Regulator Assembly, 100 psi (7 bar). PEEK Holder with PEEK/Tefzel Cartridge, 1/4-28 Tefzel Flangeless Fittings for 1/16 OD Tubing, Wrenches

Pressure Relief Valve. For 1/16 inch OD tubing with Delrin/Tefzel fittings & wrenches, 100 psi (7 bar)

Tubing Sleeve. .015 inch ID x 1/16 inch OD x 1.25 inch, PEEK, Orange

Frit 10um. Frit, 10um Porosity, 0.750 inch disc diameter x.070 inch thickness x.880 inch total diameter, Material: 316 stainless steel, For use with standard 10-32 coned fittings and 1/16in tubing

Filter, Inline, Semi-Prep, 10um Porosity. For 1/16 inch OD tubing, stainless steel.

Union, Webbed. With fittings for 1/16 inch OD tubing 10-32 threads, .010 inch (.25mm) thru-hole, 316 stainless steel

Union, Waters Compatible, Webbed. For 1/16 inch OD tubing 10-32 threads, .020 inch thru-hole, 316 stainless steel, with fittings

Union, Webbed. For 1/16 inch OD tubing 10-32 threads, .020 inch (.5mm) thru-hole, 316 stainless steel, with fittings

Tubing, 316 Stainless Steel. .020 inch (.5mm) ID x 1/16 inch OD x 25', yellow band

Tubing, 316 Stainless Steel. .007 inch (175um) ID x 1/16 inch OD x 10cm, black band

Cross. For 1/16 inch OD tubing 10-32 threads, .020 inch (.5mm) thru-hole, PEEK with PEEK fingertight fittings

Tee. For 1/16 inch OD tubing 10-32 threads, .020 inch (.5mm) thru-hole, PEEK with PEEK fingertight fittings

Cross. For 1/8 inch OD tubing 1/4-28 threads, .05 inch (1.25mm) thru-hole, PEEK with PEEK/Tefzel flangeless fittings

Adapter. Internal/Female 10-32 Threads to Internal/Female 1/4-28 PEEK

Column Plug, Extra Long. 10-32 Threads, PEEK, Natural

Nut, Flangeless. For 1/8 inch OD tubing, 1/4-28 threads, Delrin (Acetal), black (10 Pk)

Ferrule, LiteTouch, For 1/8GCY OD Tubing. PEEK with Stainless Steel Lock Ring (10 Pk)

Nut, LiteTouch, For 1/16GCY OD Tubing. 10-32 Threads, PEEK (10 Pk)

Filter, Inlet, 2um Porosity. 316 Stainless Steel, For 1/8 OD Tubing (5 Pack)

COLUMN 15MX0.25 OV-225 - 715-2502

Carbohydrate Analysis Column, Cation Exchange, Gel-type, HC-75 Ca+form, 4.1 x 250 mm. Particle: 9 um. HC-40 Ca++ form columns separate oligosaccharides up to DP8. HC-75 Ca++ form columns separate mono- and disaccharides. HC-75 Pb++ form columns separate sugar alcohols.

Frit, 10um Porosity 0.062 inch disc diameter x 0.062 inch thickness x.250 inch total diameter, 316 stainless steel

Back Pressure Regulator Assembly, 5 psi (.3 bar). PEEK Holder with PEEK/Tefzel Cartridge, 1/4-28 Tefzel Flangeless Fittings for 1/16 OD Tubing

Filter, Inlet, Bottom-of-the-Bottle, 10um Porosity. For 1/16 inch OD tubing

SGE Replacement Needle & Plunge Kit. Repair kit for 0.5uL on-Column plunger-in-needle syringes, needle is stainless steel, 70 mm long, 26 gauge (0.47mm OD) with a cone point style

SGE Syringe, 2.5 mL. Diluter/Dispenser version Removable Needle valve, Needle is stainless steel, 0.50 mm OD (25 gauge), 50 mm long w/ bevel point style Gas Tight plunger

SGE Syringe, 1 mL. 1/4-28 screw thread termination with Kel-F insert, Gas Tight plunger. For use on PerkinElmer LC Autosampler

SGE Syringe, 1 mL. Diluter/Dispenser version Removable Needle valve, Needle is stainless steel, 0.50 mm OD (25 gauge), 50 mm long w/ bevel point style Gas Tight plunger

SGE Syringe, 500uL. 1/4-28 screw thread termination with Kel-F insert, Gas Tight plunger with adjustable plunger stop. For use on PerkinElmer LC Autosampler

SGE Syringe, 500 uL. Removable Needle valve, Needle is stainless steel, 0.50 mm OD (25 gauge), 50 mm long w/ bevel point style Gas Tight plunger

SGE Syringe, 100ul. 1/4-28 screw thread termination with Kel-F insert, Gas Tight plunger with adjustable plunger stop. For use on PerkinElmer LC Autosampler

Ferrule, Super Flangeless. With stainless steel Ring, For 1/16 inch OD Tubing, PEEK, Natural (10 Pk)

Veriflo Flow Controller 423XL 2-4 mL/min. Veriflo 423XL Flow Controller, Flow Capacity: 2-4 mL/min, with critical orifice, Material: Stainless Steel, Orifice Size: 0.0012in, interchangeable, Non-Silcosteel-treated

Scott/Air Liquide Transportable Pure Mixture, Carbon monoxide (7%), oxygen (4%), carbon dioxide (15%), and methane (4.5%) in nitrogen, Grade: Blend tolerance: +/-5%; Analytical accuracy: +/-2%, with CGA-160 connection Shelf Life: 3 yr, Size: 14 liter

Ultra-Clean Resin 100g. Ultra-Clean Resin, typically eliminates the hassle of cleaning and testing resin for air sampling, For adsorbing semivolatiles in air, Cleaned and GC tested,Size; 100 gram

Veriflo 423XL Flow Controller, Orifice Size:without orifice, Material: Siltek-Treated.

Vacuum Gauge 2in. Vacuum Gauge, Diameter: 2in, Fittings: 1/4in NPT, High-quality, with 316 stainless steel wetted surfaces. -30in Hg to 0in Hg, for use with passive sampling kits, All are rear mount

Vacuum Gauge 2in. Vacuum Gauge, Diameter: 2in, Fittings: 1/8in NPT, High-quality, with 316 stainless steel wetted surfaces. -30in Hg to 0in Hg, for use with passive sampling kits, All are rear mount

Mini-Regulator 0-300 psig. Mini-Regulator, for natural gas and refinery gas standards, 0-300 psig inlet pressure range, 0-15 psig outlet pressure range, With brass CGA 170 nut and nipple, and 1/8-inch compression outlet

Tedlar Sampling Bag 40. Tedlar Sampling Bag, Unique all-in-one septum and valve fitting, Polypropylene valve conveniently connects to 3/16in ID PTFE tubing, Continuous sampling temperature up to 225 deg F (107 deg C), short term (1-2 hours), Volume: 40L, Size: 24in x 24.25in

Passive Air Sampling Kit 0.008in. Passive Air Sampling Kit, Flow Capacity: 0.5-2 mL/min, Orifice Size:0.008in, Material:Stainless Steel, Provide accurate integrated sampling without a sampling pump, Excellent for sampling times from 0.5 hour to 125 hours

Regulator CGA-160 Inlet Connection. Regulator for use with 48 L Scott/Air Liquide transportable gases, Fittings: CGA-160 Inlet Connection, Maximum Inlet Pressure: 300 psig, Outlet Pressure Range: 2-10 psig, Body: Brass, Diaphragm: Viton, Seat: Acetal, Seal: Viton, 1/4in female NPT

Regulator CGA-160 Inlet Connection. Regulator for use with 14 L Scott/Air Liquide transportable gases, Fittings: CGA-160 Inlet Connection, Maximum Inlet Pressure: 300 psig, Outlet Pressure Range: 2-10 psig, Body: Brass, Diaphragm: Viton, Seat: Acetal, Seal: Viton, 1/4in female NPT

Veriflo 423XL, Flow Controller, without orifice, Material:Stainless Steel.

Passive Air Sampling Kit 0.0060in. Passive Air Sampling Kit, Flow Capacity:2-4 mL/min, Orifice Size:0.0060in, Material:Stainless Steel, Provide accurate integrated sampling without a sampling pump, Excellent for sampling times from 0.5 hour to 125 hours

Passive Air Sampling Kit 0.0030in. Passive Air Sampling Kit, Flow Capacity:2-4 mL/min, Orifice Size:0.0030in, Material:Stainless Steel, Provide accurate integrated sampling without a sampling pump, Excellent for sampling times from 0.5 hour to 125 hours

Passive Air Sampling Kit 0.0016in. Passive Air Sampling Kit, Flow Capacity:2-4 mL/min, Orifice Size:0.0016in, Material:Stainless Steel, Provide accurate integrated sampling without a sampling pump, Excellent for sampling times from 0.5 hour to 125 hours

ALTEF Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, Volume: 25 L, Size: 18in x 24in, Very low VOC and sulfur background, Durable PVDF film is resistant to abrasion and chemicals, Contain no additives, fillers, or pigment

Veriflo Flow Controller, Capacity:0.5-2 mL/min, Orifice Size:0.0008in, Material:Stainless Steel.

Tedlar Sampling Bag 5L. Tedlar Sampling Bag, Unique all-in-one septum and valve fitting, Polypropylene valve conveniently connects to 3/16in ID PTFE tubing, Continuous sampling temperature up to 225 deg F (107 deg C), short term (1-2 hours), Volume: 5L, Size: 12in x 12.5in

Swagelok Quick-Connect Stem Fitting, Material:Siltek-Treated, for Miniature Air Sampling Canisters, Connection: 1/4in tube fitting, Attach quick-connect body fitting to stem fitting to open canister

Veriflo Flow Controller 423XL 8-15 mL/min. Veriflo 423XL Flow Controller, Flow Capacity: 8-15 mL/min, with critical orifice, Material: Stainless Steel, Orifice Size: 0.0020in, interchangeable, Non-Silcosteel-treated

Veriflo Flow Controller 423XL 30-80 mL/min. Veriflo 423XL Flow Controller, Flow Capacity: 30-80 mL/min, with critical orifice, Material: Stainless Steel, Orifice Size: 0.0060in, interchangeable, Non-Silcosteel-treated

Veriflo Flow Controller 423XL 15-30 mL/min. Veriflo 423XL Flow Controller, Flow Capacity: 15-30 mL/min, with critical orifice, Material: Stainless Steel, Orifice Size: 0.0030in, interchangeable, Non-Silcosteel-treated

Multi-Layer Foil Gas Sampling Bag, Modification:Polypropylene Combo Valve and Septum, Volume: 25 L, Size: 18in x 24in, Chemically inert with light and moisture protection, Not recommended for low ppm VOCs due to background levels, Protective 5-layer barrier

Replacement Frit Filter 2um. Replacement Frit Filter, Material:Stainless Steel, 2 um, For use in critical orifice fitting, Includes washers

Humidification Chamber, for cleaning SilcoCan or TO-Can canister, humidified air or nitrogen used to remove volatile organic contaminants, made of acrylic and withstands pressure up to 90 psi, with 1/4-inch inlet and outlet compression fitting, with easy-to-open lid

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax TA (35/60 mesh)/Graphitized Carbon (40/60 mesh)/Carboxen 1000 (60/80 mesh), Type: Unconditioned, Material: Stainless Steel, Use corrosion-resistant glass tubes for excellent inertness

Thermal Desorption Unit (TDU) Tube. Thermal Desorption Unit (TDU) Tube, Sorbent: Tenax TA (35/60 mesh), Type: Conditioned & Capped, Material: Stainless Steel, Individually etched with unique serial number for convenient sample identification

Syringe Spare Plunger O-Ring, For Gas Chromatography, Volume: 1000 ml.

Miniature Canister 400cc. Miniature Canister, Modification:with Siltek-Treated Quick-Connect Stem Fitting, Material:Siltek-Treated, Volume:400 cc,Ideal for indoor air, personal, emergency response, or soil gas sampling, Dimensions: 7 x 13.6 cm

In-Line Filter 7 um. In-Line Filter, Material: Siltek-Treated, to collect particles larger than 7 um, with 1/4in compression fitting on both ends

Replacement Orifice 0.0020in. Replacement Orifice, Flow Capacity:8-15 mL/min, Orifice Size:0.0020in, Material:Siltek-Treated, to change the flow range for alternative sampling times

Vacuum/Pressure Gauge 30in Hg/60 psi. Replacement Combination Vacuum/Pressure Gauge, 2-inch vacuum/pressure gauges, 316 stainless steel with 1/8in NPT fitting and center back mount, 30in Hg/60 psi

Tedlar Sampling Bag 100L. Tedlar Sampling Bag, Unique all-in-one septum and valve fitting, Polypropylene valve conveniently connects to 3/16in ID PTFE tubing, Continuous sampling temperature up to 225 deg F (107 deg C), short term (1-2 hours), Volume: 80L, Size: 28.25x 30.5in

Tedlar Sampling Bag 12L. Tedlar Sampling Bag, Unique all-in-one septum and valve fitting, Polypropylene valve conveniently connects to 3/16in ID PTFE tubing, Continuous sampling temperature up to 225 deg F (107 deg C), short term (1-2 hours), Volume: 12L, Size: 13in x 24in

Replacement Orifice 0.0060in. Replacement Orifice, Flow Capacity:30-80 mL/min, Orifice Size:0.0060in, Material:Siltek-Treated, to change the flow range for alternative sampling times

Replacement Orifice 0.0030in. Replacement Orifice, Flow Capacity:15-30 mL/min, Orifice Size:0.0030in, Material:Siltek-Treated, to change the flow range for alternative sampling times

Vacuum/Pressure Gauge 30in Hg/30 psi. Replacement Combination Vacuum/Pressure Gauge, 2-inch vacuum/pressure gauges, 316 stainless steel with 1/8in NPT fitting and center back mount, 30in Hg/30 psi

Vacuum/Pressure Gauge 30in Hg/15 psi. Replacement Combination Vacuum/Pressure Gauge, 2-inch vacuum/pressure gauges, 316 stainless steel with 1/8in NPT fitting and center back mount, 30in Hg/15 psi

Tedlar Sampling Bag 25L. Tedlar Sampling Bag, Unique all-in-one septum and valve fitting, Polypropylene valve conveniently connects to 3/16in ID PTFE tubing, Continuous sampling temperature up to 225 deg F (107 deg C), short term (1-2 hours), Volume: 25L, Size: 17.5in x 24in

Passive Air Sampling Kit 0.0012in. Passive Air Sampling Kit, Flow Capacity:2-4 mL/min, Orifice Size:0.0012in, Material:Stainless Steel, Provide accurate integrated sampling without a sampling pump, Excellent for sampling times from 0.5 hour to 125 hours

Passive Air Sampling Kit 0.0020in. Passive Air Sampling Kit, Flow Capacity:2-4 mL/min, Orifice Size:0.0020in, Material:Stainless Steel, Provide accurate integrated sampling without a sampling pump, Excellent for sampling times from 0.5 hour to 125 hours

ALTEF Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, Volume: 3 L, Size: 10in x 10in, Very low VOC and sulfur background, Durable PVDF film is resistant to abrasion and chemicals, Contain no additives, fillers, or pigment

ALTEF Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, Volume: 10 L, Size: 12in x 22in, Very low VOC and sulfur background, Durable PVDF film is resistant to abrasion and chemicals, Contain no additives, fillers, or pigment

Miniature Canister 400cc. Miniature Canister, Modification:with Quick-Connect Stem Fitting, Material:Siltek-Treated, Volume:400 cc, Ideal for indoor air, personal, emergency response, or soil gas sampling, Dimensions: 7 x 13.6 cm

Veriflo Flow Controller 423XL 2-4 mL/min. Veriflo 423XL Flow Controller, Flow Capacity: 2-4 mL/min, with critical orifice, Material: Siltek-Treated, Orifice Size: 0.0012in, interchangeable

Spectra Gas 7621 High-Purity VOC Regulator, Outlet Gauge: 0-30 psig outlet pressure gauge, Single-stage, stainless steel, Two pressure gauges and CGA-180 fitting, Individually tested for leaks and impurities, Accurate pressure control

Veriflo Flow Controller 423XL 4-8 mL/min. Veriflo 423XL Flow Controller, Flow Capacity: 4-8 mL/min, with critical orifice, Material: Stainless Steel, Orifice Size: 0.0016in, interchangeable, Non-Silcosteel-treated

Replacement Orifice 0.0016in. Replacement Orifice, Flow Capacity:4-8 mL/min, Orifice Size:0.0016in, Material:Siltek-Treated, to change the flow range for alternative sampling times

Replacement Orifice 0.0012in. Replacement Orifice, Flow Capacity:2-4 mL/min, Orifice Size:0.0012in, Material:Siltek-Treated, to change the flow range for alternative sampling times

Replacement Frit Filter 2um. Replacement Frit Filter, Material:Siltek-Treated, 2 um, For use in critical orifice fitting, Includes washers

Syringe Luer Lock Valve Adaptor, connect a luer lock fitting to a Rheodyne or Valco valve.

Syringe Spare Plunger O-Ring, For Gas Chromatography, Volume: 500 ml.

Replacement Orifice 0.0008in. Replacement Orifice, Flow Capacity:0.5-2 mL/min, Orifice Size:0.0008in, Material: Siltek-Treated, used with a Veriflo 423XL flow controller to change the flow range for alternative sampling times

Miniature Canister 400cc. Miniature Canister, Modification:with Quick-Connect Stem Fitting, Material:Electropolished Stainless Steel, Volume:400 cc, Ideal for indoor air, personal, emergency response, or soil gas sampling, Dimensions: 7 x 13.6 cm

Passive Air Sampling Kit 0.0016in. Passive Air Sampling Kit, Flow Capacity:2-4 mL/min, Orifice Size:0.0016in, Material:Siltek-Treated, ensure accurate sampling of active components, Provide accurate integrated sampling without a sampling pump, Excellent for sampling times from 0.5 hour to 125 hours

Passive Air Sampling Kit 0.0012in. Passive Air Sampling Kit, Flow Capacity:2-4 mL/min, Orifice Size:0.0012in, Material: Siltek-Treated, ensure accurate sampling of active components, Provide accurate integrated sampling without a sampling pump, Excellent for sampling times from 0.5 hour to 125 hours

Tedlar Sampling Bag 3L. Tedlar Sampling Bag, Unique all-in-one septum and valve fitting, Polypropylene valve conveniently connects to 3/16in ID PTFE tubing, Continuous sampling temperature up to 225 deg F (107 deg C), short term (1-2 hours), Volume: 3L, Size: 9.5in x 10in

Multi-Layer Foil Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, Volume: 1 L, Size: 10in x 10in, Chemically inert with light and moisture protection, Continous sampling temperature up to 190 deg F (88 deg C), Composition: 5-layer

Replacement Orifice 0.0016in. Replacement Orifice, Non-Siltek, Flow Capacity: 4-8 mL/min, Orifice Size: 0.0016in, Material: Stainless Steel, Use these orifices with a Veriflo 423XL flow controller to change the flow range for alternative sampling times.

Replacement Orifice 0.0012in. Replacement Orifice, Non-Siltek, Flow Capacity: 2-4 mL/min, Orifice Size: 0.0012in, Material: Stainless Steel, Use these orifices with a Veriflo 423XL flow controller to change the flow range for alternative sampling times.

Replacement Orifice 0.0008in. Replacement Orifice, Flow Capacity:0.5-2 mL/min, Orifice Size:0.0008in, Material:Stainless Steel, used with a Veriflo 423XL flow controller to change the flow range for alternative sampling times

Replacement Orifice 0.0020in. Replacement Orifice, Non-Siltek, Flow Capacity: 8-15 mL/min, Orifice Size: 0.0020in, Material: Stainless Steel, Use these orifices with a Veriflo 423XL flow controller to change the flow range for alternative sampling times.

Replacement Orifice 0.0060in. Replacement Orifice, Non-Siltek, Flow Capacity: 30-80 mL/min, Orifice Size: 0.0060in, Material: Stainless Steel, Use these orifices with a Veriflo 423XL flow controller to change the flow range for alternative sampling times.

Replacement Orifice 0.0030in. Replacement Orifice, Non-Siltek, Flow Capacity: 15-30 mL/min, Orifice Size: 0.0030in, Material: Stainless Steel, Use these orifices with a Veriflo 423XL flow controller to change the flow range for alternative sampling times.

Tedlar Sampling Bag 80L. Tedlar Sampling Bag, Unique all-in-one septum and valve fitting, Polypropylene valve conveniently connects to 3/16in ID PTFE tubing, Continuous sampling temperature up to 225 deg F (107 deg C), short term (1-2 hours), Volume: 80L, Size: 28.25in x 30.5in

Adaptor, for Capillary Column on Split/Splitless Injector, nstrument: for Thermo Scientific TRACE & Focus SSL, Benefits and Uses: For use with M4 ferrules, Use same installation distance as manufacturer's adaptor, Made of high-quality stainless steel

Silver Seal 10pack. Silver Seal, Instrument: for Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL, Benefits and Uses: for Split/Splitless Injector, size: 10pack

Oven Temperature Sensor Assembly, Instrument: for Agilent 5890 GCs.

Heater Cartridge & Platinum Resistance Thermometer (PRT) Sensor. Heater Cartridge & Platinum Resistance Thermometer (PRT) Sensor, Instrument: for Agilent 5890 GCs, Use with 5890 FID and split/splitless weldments, Meets or exceeds original manufacturer's performance

Autosampler Plunger Carrier Belt, Instrument: for Agilent 7673A & 7673B Autosamplers, All parts meet or exceed original manufacturer's performance

Carriage Motor Belt, Instrument: for Agilent 7673A, 7673B, and 7673C Autosamplers, Meets original manufacturer's performance

Injection Port Weldment, Instrument: for Agilent 6890 GCs with large canister-type filter, with OI Purge and Trap Systems, Easily attach your purge and trap with pre-installed low dead volume fittings

Injection Port Weldment, Instrument: for Agilent 6890 GCs with large canister-type filter with Tekmar Purge and Trap Systems, Easily attach your purge-and-trap with pre-installed low dead volume fittings

Injection Port Weldment, Instrument: for Agilent 5890 GCs with Tekmar Purge and Trap Systems,Easily attach your purge-and-trap with pre-installed low dead volume fittings

Injection Port Weldment, Instrument: for Agilent 6890 GCs with OI Purge and Trap Systems, Easily attach your purge and trap with pre-installed low dead volume fittings

FID Capillary Column Adaptor, Instrument: for PerkinElmer Auto SYS XL, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance, Benefits and Uses: For use with 1/16in compression-style nuts

FID Capillary Column Adaptor, Instrument: for PerkinElmer Auto SYS XL, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance, Benefits and Uses: For use with PE-style capillary nuts

GC Column-Mass Spectrometer Connector, EZ No-Vent, Includes: connector, interface adaptor, 0.4 mm ID adaptor ferrules for capillary column (2), 0.4 mm ID ferrules for transfer line (2), 100 um deactivated transfer line (3 ft), column plug, column nut

Z-Belt, for Agilent 7673B & 7683 Autosamplers, Meets original manufacturer's performance.

Injector Adaptor, for PerkinElmer CAP Injector, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance, Siltek-treated version available for increased inertness, Application: For use with PE-style capillary nuts, Material: Siltek-Treated

Injector Adaptor, for PerkinElmer CAP Injector, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance, Siltek-treated version available for increased inertness

Split/Splitless Injection Port, EZ Twist Top, for Agilent 7890 GCs, Includes: weldment, shell weldment, weldment O-rings (2), Siltek dual Vespel ring inlet seal, septum nut, reducing nut, SS capillary nut for use with 1/16in ferrules,removal tool

Liner Cap, Gold-Plated, for Split/Splitless Injector on Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL

Heater Cartridge, and Platinum Resistance Thermometer (PRT) Sensor, for Agilent 5890 GCs, Use with 5890 FID and split/splitless weldments

Injector/FID Heater and Injector/FID PRT Sensor, Heater Cartridge & Platinum Resistance Thermometer (PRT) Sensor, for Agilent 5890 GCs, Use with 5890 FID and split/splitless weldments

O-Rings for APEX liners, Material: Viton, Max Temp: 250 deg C.

Capillary Column Nut, Material: Brass, For use with standard 1/16inch-type ferrules. For Agilent 5890/6850/6890/7890 GCs

Packed Column Inlet Adaptor Kit, for 1/4inch Injection Ports, for 1/8inch Columns, Centers column perfectly in injection port to eliminate bent syringe needles. Slotted design prevents carrier gas occlusion. Vespel/graphite reducing ferrules make installation easy

Packed Column Inlet Adaptor Kit, for 1/4inch Injection Ports, for 3/16inch Columns, Centers column perfectly in injection port to eliminate bent syringe needles. Slotted design prevents carrier gas occlusion. Vespel/graphite reducing ferrules make installation easy

Capillary Dedicated FID Replacement Jet, High-Performance Siltek Treated, 0.011-Inch ID Tip, for Agilent 5890/6850/6890/7890 GCs, Length: 43 mm

Septa Holder Kit, Includes septum support and holder. Made from high-quality stainless steel. Silcosteel-AC-treated version helps with septum removal. For Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL

Injector Mounting Post, for Agilent 7673 Series Autosamplers, For Agilent 7673 Series Autosamplers for use with 6890 GCs

Injector Mounting Post, for Agilent 7683 Series Autosamplers for use with 6850/6890 GCs

FID Collector Assembly Kit, w/Siltek Ignitor Castle, Constructed of high-quality stainless steel. For Agilent 5890/6890/6850/7890 GCs

FID Collector Assembly Kit, w/Siltek Ignitor Castle, Constructed of high-quality stainless steel. For Agilent 6890/6850/7890 GCs

FID Collector Assembly Kit, w/Siltek Ignitor Castle, Constructed of high-quality stainless steel. For Agilent 5890 GCs

FastPack Inlet Maintenance Kit, for Agilent GCs, 4 mm Split with Wool.

FastPack Inlet Maintenance Kit, for Agilent GCs, 4 mm Splitless Gooseneck.

FastPack Inlet Maintenance Kit, for Agilent GCs, 4 mm Splitless.

Packed Column Installation Kit, Includes: 1/8inch SS nut (1), stainless steel Valco nut (1), 1/8inch Vespel/graphite ferrule (1), stainless steel Valco ferrule (1), 1/8inch SS front ferrule (1), 1/8inch SS back ferrule (1), for 2 mm ID columns; for valve applications.

Micropacked Column Installation Kit, 1/16in Valco nut (1), 1/16in stainless steel nut (1), 1/16in Vespel/graphite ferrule (1), 1/16in graphite ferrule (1), stainless steel ferrule (1), 1/16in SS front ferrule (2), for 1 mm ID columns; for direct injections.

Micropacked Column Installation Kit, 1/16in Valco nut (1), 1/16in stainless steel nut (1), 1/16in Vespel/graphite ferrule (1), 1/16in graphite ferrule (1), stainless steel ferrule (1), 1/16in SS front ferrule (1), 1/16in stainless steel back ferrule (1)

Replacement Transfer Line, for EZ No-Vent GC Column-Mass Spectrometer Connectors, 3FT

Cross-Disk Inlet Seal, ID: 1.2 mm, Material: Siltek-Treated, Ideal for high-flow split applications 500 mL/min on Agilent 5890 GCs. Siltek treatment provides enhanced inertness versus stainless steel. All seals include washers

Cross-Disk Inlet Seal, ID: 1.2 mm, Material: Gold-Plated, Ideal for high-flow split applications 500 mL/min on Agilent 5890 GCs. Siltek treatment provides enhanced inertness versus stainless steel. All seals include washers

Cross-Disk Inlet Seal, ID: 1.2 mm, Material: Gold-Plated, Ideal for high-flow split applications 500 mL/min on Agilent 5890 GCs. Siltek treatment provides enhanced inertness versus stainless steel. All seals include washers

FID/NPD Adaptor Fitting, Easy-to-use, sturdy, compact stainless steel fitting. 1/16-inch nut uses standard graphite or Vespel/graphite ferrules, Wrench pad wonGt turn when installing a capillary column. Wrench pad wonGt turn when installing a capillary column

Photoionization (PID) Lamp. Photoionization (PID) Lamp, Model 108-10.0/10.6 offers both 10.0 and 10.6 eV potential, has a 0.781inch base diameter, and is used in Tracor, OI, and Baseline instruments. Model 103 has a 1.375inch base and is used in HNU and SRI detectors.

PID Lamp Polishing Kit, contains iron oxide cleaning compound, swabs, and instructions.

Cross-Disk Inlet Seal, ID: 0.8 mm, Material: Siltek-Treated, for Agilent GCs, Ideal for high-flow split applications 500 mL/min on Agilent 5890 GCs. Siltek treatment provides enhanced inertness versus stainless steel. All seals include washers

Heat Sink, for Agilent 5890 GC Split/Splitless Injector.

Split/Splitless Injection Port, Direct Replacement or Siltek Treated, for Agilent 5890 GCs, high-quality stainless steel

Cylinder Valve Wrench, designed wrench enables easy opening of cylinder valves that are fitted with a hand wheel. It is also suitable for removing difficult cylinder caps.

ECD Vent Trap, Fittings: 1/8inch, Reduces the release of hazardous materials from the ECD vent into the lab. Includes connecting lines and mounting kit. 6inch x 1inch (15.2 x 2.5 cm)

Flexible Stainless Steel Hoses, Fittings: 1/4inch Female NPT, Length: 18inch.

Flexible Stainless Steel Hoses, Fittings: 1/4inch Female NPT, Length: 36inch.

Tee, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Tee, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Plug Valve, Size: 1/4inch, Material: Brass, Shut-Off Gas Valve.

Plug Valve, Size: 1/8inch, Material: Brass, Shut-Off Gas Valve.

Universal Cylinder Wrench, versatile wrench for tightening gauges and gas regulator CGA fittings to cylinder outlets and pipe thread connections

Union, Material: Silcosteel-CR Treated, Size: 1/8inch.

Tee, Material: Siltek/Sulfinert-Treated, Size: 1/16inch.

Union, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Union, Material: Silcosteel-CR Treated, Size: 1/16inch.

Elbow, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Elbow, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Union, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Toggle Valve, Size: 1/4inch, Material: Brass, Shut-Off Gas Valve.

Toggle Valve, Size: 1/8inch, Material: Brass, Shut-Off Gas Valve.

Tee, Material: Stainless Steel, Size: 1/4inch.

Tee, Material: Stainless Steel, Size: 1/8inch.

Union, Material: Siltek/Sulfinert-Treated, Size: 1/16inch.

Cylinder Holder, Wall Mounted, Size: Single, designed to prevent free-standing gas cylinders from tipping over and injuring personnel. The cast aluminum holder can be secured to a wall or the side of a work bench. Diameter: 4-15 inch

Tee, Material: Stainless Steel, Size: 1/16inch.

Air Purifier Module, Gas-Specific, Fittings: Compression Tube Fittings 1/8inch, Max Pressure: 1000psi, 6895kPa, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air.

Air Purifier Module, Gas-Specific, Fittings: Compression Tube Fittings 1/4inch, Max Pressure: 1000psi, 6895kPa, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air.

Nitrogen Purifier Module, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air. Reduce gas impurities from ppm to low ppb levels. Max Pressure: 1000psi, 6895kPa

Hydrogen Purifier Module, Fittings: Compression Tube Fittings 1/8inch, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air. Reduce gas imp

Hydrogen Purifier Module, Fittings: Compression Tube Fittings 1/4inch, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air. Reduce gas impurities from ppm to low ppb levels.

Helium Purifier Module, Fittings: Compression Tube Fittings 1/4inch, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air. Reduce gas impurities from ppm to low ppb levels.

Plug Valve, Size: 1/8inch, Material: Stainless Steel, Shut-Off Gas Valve.

Ball Valve, Size: 1/4inch, Material: Brass, Shut-Off Gas Valve, 2-WAY BALL.

Ball Valve, Size: 1/8inch, Material: Brass, Shut-Off Gas Valve, 2-WAY BALL.

Toggle Valve, Size: 1/4inch, Material: Stainless Steel, Shut-Off Gas Valve.

Tee, Material: Brass, Size: 1/4inch.

Nut, Material: Brass, Size: 1/4inch.

Nut, Material: Brass, Size: 1/8inch.

Gas Pressure Gauge Kit, for Thermal Gas Purifiers, Use an in-line pressure gauge to indicate when a thermal gas purifier getter tube should be replaced. Includes 1/8inch tee and 0G100 psi (0-689k Pa) gauge.

Hydrogen Flashback Arrestor, Material: Brass Body, Fittings: 1/4inch Female NPT, Valve cuts off gas supply in the event of a flashback. Meets safety requirements of BS6158, EN730, ISO 5175, AS 4603 and are UL Listed 23Y5.

Ball Valve, Size: 1/4inch, Material: Stainless Steel, Shut-Off Gas 2-Way Valve.

Automatic Switchover System With Line Regulator For Use with H2, P5(CGA 350), Material: Brass, High-purity automatic switchover systems provide a continuous supply of high-purity gas to the laboratory, process, or instrument

Ultra-High-Purity Regulator, with CGA Fittings, Material: Stainless Steel, Type: Single-Stage, Fittings: CGA 580 (N2, He, Ar), Outlet Gauge: 30inch, 0 to 200 psig (0G1,379 kPa), Outlet Pressure: 0 to 150 psig (0G1,034 kPa)

Zero Dead Volume Tee, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Plug, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Back Ferrule, Material: Stainless Steel, Size: 1/16inch.

Filter Base Plate, Material: Stainless Steel, Size: Single-Position, End fittings available in brass or stainless steel. Base plates fit all stand alone Super Clean gas filters offered, 1/8 FITTINGS

Cross, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Plug, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Plug, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Fittings, Sulfinert, Zero Dead Volume Union, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Fittings, Reducing Union, Sulfinert, Material: Siltek/Sulfinert-Treated, Size: 1/4inch to 1/8inch.

Union, Material: Brass, Size: 1/4inch.

Back Ferrule, Material: Brass, Size: 1/4inch.

Back Ferrule, Material: Brass, Size: 1/8inch.

Reducing Union, Material: Silcosteel-CR Treated, Size: 1/8inch to 1/16inch.

Ultra-High-Purity Regulator, Material: Brass, Type: Single-Stage, Fittings: CGA 580 (N2, He, Ar), Outlet Gauge: 30inch, 0 to 14 bar (0G200 psig), Outlet Pressure: 0 to 10 bar (0G150 psig), with International Fittings, Most stab outlet pressure control.

Silcosteel-CR Fittings, Cross, Material: Silcosteel-CR Treated, Size: 1/8inch.

Silcosteel-CR Fittings, Elbow, Material: Silcosteel-CR Treated, Size: 1/4inch.

Silcosteel-CR Fittings, Union, Material: Silcosteel-CR Treated, Size: 1/4inch.

Cross, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Cross, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Elbow, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Elbow, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Union, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Union, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Fittings, Sulfinert, Reducing Union, Material: Siltek/Sulfinert-Treated, Size: 1/4inch to 1/16inch.

Fittings, Sulfinert, Reducing Union, Material: Siltek/Sulfinert-Treated, Size: 1/8inch to 1/16inch.

Back Ferrule, Material: Brass, Size: 1/16inch.

Front Ferrule, Material: Brass, Size: 1/4inch.

Front Ferrule, Material: Brass, Size: 1/8inch.

Union, Material: Silcosteel-CR Treated fitting, Size: 1/16 inch, For chromatograph.

Swagelok Union, Size:1/16in, Material:Siltek/Sulfinert-Treated.

Parker Front Ferrule, Size:1/16in, Material:Brass, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Replacement Desiccant Cartridge, for Parker Balston Model FID-1000 and FID-2500 Gas Stations.

Tubing 25ft. Tubing, Welded/Drawn, ID:0.210in, OD:1/4in, Material:Instrument-Grade 304 Grade Stainless Steel, Rinsed and Cleaned 304 Stainless Steel TubingUse for providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Length: 25ft

Tubing 25ft. Tubing, Welded/Drawn, ID:0.02in, OD:1/16in, Material:Instrument-Grade 304 Grade Stainless Steel, Rinsed and Cleaned 304 Stainless Steel TubingUse for providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Length: 25ft

Gas Filter Bundle Kit, Includes:one triple gas filter and two fuel gas filter, High-purity output ensures 99.9999% pure gas (at max. Flow of 2 L/min).Designed for easy, hassle-free cartridge changes, Glass inside to prevent diffusion, polycarbonate housing outside for safety

Click-On In-line Super Clean Connector, Fittings:1/8in Brass, Length: 2 3/8in.

Reducing Union, Size:1/8in to 1/16in, Material:Stainless Steel, Vendor:Parker, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Parker Union, Size:1/4in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Parker Union, Size:1/8in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Parker Back Ferrule, Size:1/8in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Ultra-High-Purity Regulator, Material:Chrome-Plated Brass, Type:Dual-Stage, Fittings:DIN 477 no. 6 (He, Ar), Outlet Gauge:30in, 0 to 14 bar (0-200 psig)Outlet Pressure:0 to 10 bar (0-150 psig), Oxidation-resistant, chrome-plated, Most stable outlet pressure control,

Super Clean Cleaning Kit. Super Clean Helium-Specific Carrier Gas Cleaning Kit, Includes:mounting base plate, 1/8in inlet/outlet fittings, and oxygen/moisture/hydrocarbon helium-specific filter, packed and conditioned using helium, for purification of helium in GC-MS systems

Tee, Material: Silcosteel-CR Treated fitting, Size: 1/4 inch, For chromatograph.

Tee, Material: Silcosteel-CR Treated fitting, Size: 1/8 inch, For chromatograph.

Tee, Material: Siltek/Sulfinert-Treated fitting, Size: 1/4inch, For chromatograph.

Tee, Material: Siltek/Sulfinert-Treated fitting, Size: 1/8inch, For chromatograph.

Ultra-High-Purity Regulator, Material:Stainless Steel, Type:Single-Stage, Fittings:CGA 590 (Air), Outlet Gauge:30in, 0 to 200 psig (0-1,379 kPa), Outlet Pressure:0 to 150 psig (0-1,034 kPa), identical gas purity protection as with dual-stage gas regulators

Click-On In-line Super Clean Ultra-High Capacity Moisture Trap, Dimensions: 8 1/2in x 1 1/4in.

Front Ferrule, Size:1/16in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Female Connector 1/8inch to 1/4inch NPT. Female Connector, Material: Siltek/Sulfinert-Treated fitting, Size: 1/8inch to 1/4inch NPT, Ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Female Connector 1/4inch to 1/4inch NPT. Female Connector, Material: Siltek/Sulfinert-Treated fitting, Size: 1/4inch to 1/4inch NPT, Ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Super-Clean Filter Base Plate, Material:Stainless Steel, Size:3-Position, for Three Cartridge Filters, Dimensions: 12in x 4in x 1 7/8in

Swagelok Shut-Off Gas Valve, Ball, 3-Way, Size:1/8in, Material:Brass.

Replacement Hydrocarbon (Charcoal) Filter, for Restek Super Clean Gas Trapping System for LC-MS.

Parker Nut and Ferrule Set, Size:1/4in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections.

Parker Nut and Ferrule Set, Size:1/8in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections.

Swagelok Reducing Union, Size:1/4in to 1/8in, Material:Siltek/Sulfinert-Treated.

Parker Port Connector, Size:1/4in, Material:Siltek/Sulfinert-Treated, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Parker Port Connector, Size:1/8in, Material:Siltek/Sulfinert-Treated, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Male Connector 1/4 -1/8 inch NPT. Male Connector, Material: Brass fitting, Size: 1/4 -1/8 inch NPT, Ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Ultra-High-Purity Regulator, Material:Chrome-Plated Brass, Type:Single-Stage, Fittings:CGA 590 (Air), Outlet Gauge:30in, 0 to 200 psig (0-1,379 kPa)Outlet Pressure:0 to 150 psig (0-1,034 kPa), Oxidation-resistant, chrome-plated, Identical gas purity protection

Tube End Reducer 1/4 -1/8 inch. Tube End Reducer, Material: Stainless Steel fitting, Size: 1/4 -1/8 inch, Ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Tube End Reducer 1/8 -1/4 inch. Tube End Reducer, Material: Stainless Steel fitting, Size: 1/8 -1/4 inch, Ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

CGA 350 Fitting (H2, P5), Length:3.5in, with internal frit, 1/4-inch NPT nickel-plated brass.

Parker Port Connector, Size:1/8in to 1/4in, Material: Siltek/Sulfinert-Treated, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Reducing Union, Material: Silcosteel-CR Treated fitting, Size: 1/4-1/8 inch, For chromatograph.

Ultra-High-Purity Regulator, Material:Stainless Steel, Type:Single-Stage, Fittings:CGA 350 (H2, P5), Outlet Gauge:30in, 0 to 200 psig (0-1,379 kPa), Outlet Pressure:0 to 150 psig (0-1,034 kPa), Identical gas purity protection, secondary pressure regulation downstream

Swagelok Reducing Union, Size:1/4in to 1/16in, Material:Siltek/Sulfinert-Treated.

Swagelok Reducing Union, Size:1/8in to 1/16in, Material:Siltek/Sulfinert-Treated.

Female Connector, Material: Silcosteel-CR Treated fitting, Size: 1/4-1/4inch NPT, For chromatograph.

Tubing, Coiled0.040 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.040 inch, Outer Diameter: 1/16 in, Unit: 50 feet roll

Tubing, Coiled0.040 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.040 inch, Outer Diameter: 1/16 in, Unit: 100 feet roll

Switchover System brass. Automatic Switchover System with Line Regulator, Material:Brass, Fittings:CGA 590 (Air), provide a continuous supply of high-purity gas to the laboratory, process, or instrument to allow you to replace a depleted gas source without interruption in the gas supply

Automatic Switchover System with Line Regulator, Material:Brass, Fittings:CGA 580 (N2, He, Ar), provide a continuous supply of high-purity gas to the laboratory, process, or instrument to allow you to replace a depleted gas source without interruption in the gas supply

Tubing0.03 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.03 inch, Outer Diameter: 1/16inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 100 feet roll

Tubing0.02 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.02 inch, Outer Diameter: 1/16inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 100 feet roll

Tubing0.01 inch. Tubing, Welded/Drawn, Rinsed and Cleaned, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Diameter: 0.01 inch, Outer Diameter: 1/16inch, Application: for prov X ing carrier, fuel, make-up, or auxiliary gases to laboratory instruments, Unit: 100 feet roll

Female Connector, Material: Brass fitting, Size: 1/8inch to 1/8inch NPT, For chromatograph.

Bulkhead Union, Material: Silcosteel-CR Treated fitting, Size: 1/4 inch, For chromatograph.

Bulkhead Union, Material: Silcosteel-CR Treated fitting, Size: 1/8 inch, For chromatograph.

Port Connector, Material: Silcosteel-CR Treated fitting, Size: 1/4 inch, For chromatograph.

Tube End Reducer, Material: Silcosteel-CR Treated fitting, Size: 1/8 -1/16 inch, For chromatograph.

Swagelok Bulkhead Union, Size:1/4in, Material:Siltek/Sulfinert-Treated.

Swagelok Bulkhead Union, Size:1/8in, Material:Siltek/Sulfinert-Treated.

Parker Balston Ball Shut-Off Gas Valve, Size:1/8in, Material:Stainless Steel.

Click-On In-line Super Clean Indicator, Oxygen: green to grey, Moisture: beige to clear.

Parker Plug 1/4in. Parker Plug, Size:1/4in, Material:Brass, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Replacement O-Rings for Super-Clean Baseplates 10 Large O-rings, 10 Small O-rings.

Reducing Union, Material: Silcosteel-CR Treated fitting, Size: 1/8- 1/16 inch, For chromatograph.

Automatic Switchover System with Line Regulator, Material:Stainless Steel, Fittings:CGA 580 (N2, He, Ar), Switching pressure: 200 psig/170 psig (1,379/1,172 kPa), Inlet connections: flexible SS pigtails (36in), Line regulator: 0 to 150 psig (0-1,034 kPa)

Plug 1/4in. Plug, Size:1/4in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Plug 1/8in. Plug, Size:1/8in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Nut 1/4in. Nut, Size:1/4in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Nut 1/8in. Nut, Size:1/8in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Super Clean Connector. Click-On In-line Super Clean Connector, Fittings:1/4in Stainless Steel, change traps quickly, without introducing oxygen, length: 2 3/8in (6 cm)

Parker Union, Size:1/16in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Male Connector, Material: Silcosteel-CR Treated fitting, Size: 1/8 -1/4 inch NPT, For chromatograph.

Male Connector, Material: Siltek/Sulfinert-Treated fitting, Size: 1/4 -1/8in NPT, For chromatograph.

Male Connector, Material: Siltek/Sulfinert-Treated fitting, Size: 1/8 -1/8in NPT, For chromatograph.

Parker/Balson Deionizer pack, for H2-90/H2-500 Hydrogen Generator.

Purification Kit, Super-Clean Click-on Trap, Includes:(2) 1/4in SS connectors and (1) oxygen/moisture/hydrocarbon triple trap, Type:Carrier Gas,Fittings:1/4in Stainless Steel, Dimensions: 8 1/2 x 1 1/4in, High-purity output ensures 99.9999% pure gas, for leak-tight cartridge change

CGA 590 Fitting (Air), Length:3in, with internal frit, 1/4-inch NPT nickel-plated brass.

Parker Front Ferrule, Size:1/4in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Parker Front Ferrule, Size:1/8in, Material:Stainless Steel, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Male Connector, Material: Silcosteel-CR Treated fitting, Size: 1/4 -1/8 inch NPT, For chromatograph.

Male Connector, Material: Silcosteel-CR Treated fitting, Size: 1/4 -1/4 inch NPT, For chromatograph.

Male Connector, Material: Silcosteel-CR Treated fitting, Size: 1/16 -1/8inch NPT, For chromatograph.

Tee, Material: Silcosteel-CR Treated fitting, Size: 1/16 inch, For chromatograph.

Tee, Material: Siltek/Sulfinert-Treated fitting, Size: 1/16inch, For chromatograph.

Parker Nut and Ferrule Set, Size:1/16in, Material:Brass, ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Female Connector 1/4inch to 1/8inch NPT. Female Connector, Material: Brass fitting, Size: 1/4inch to 1/8inch NPT, Ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Tubing, Coiled0.010 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.010 inch, Outer Diameter: 1/16in, Unit: 50 feet roll

Tubing, Coiled0.020 inch. Tubing, Coiled, Deactivation: Silcosteel Treated, Hydroguard Deactivated (creates a high-density surface that is not readily attacked by aggressive hydrolysis), Material: 304 Grade Stainless Steel, Inner Diameter: 0.020 inch, Outer Diameter: 1/16in, Unit: 50 feet roll

Tube End Reducer, Material: Silcosteel-CR Treated fitting, Size: 1/4 -1/8 inch, For chromatograph.

Tube End Reducer, Material: Siltek/Sulfinert-Treated fitting, Size: 1/4 -1/8in, For chromatograph.

Tube End Reducer, Material: Siltek/Sulfinert-Treated fitting, Size: 1/8 -1/4in, For chromatograph.

CGA 580 Fitting (N2, He, Ar), with internal frit, 1/4-inch NPT nickel-plated brass, Length:3in.

Parker Balston Metering Valve, straight, Material:Stainless Steel, Size:1/4in.

Parker Balston Metering Valve, straight, Material:Stainless Steel, Size:1/8in.

Ultra-High-Purity Regulator, Material:Chrome-Plated Brass, Type:Single-Stage, Fittings:BS 341 no. 3(He, Ar, Air, N2), Outlet Gauge:30in, 0 to 14 bar (0-200 psig)Outlet Pressure:0 to 10 bar (0-150 psig), Oxidation-resistant, chrome-plated, Identical gas purity protection

Filter Base Plate 2-Position. Filter Base Plate, Material:Stainless Steel, Size:2-Position, inlet/outlet fittings accept 1/8in tubing. To adapt to 1/4in tubing, order 1/8in to 1/4in tube end reducers, Dimensions: 8in x 4in x 1 7/8in

Female Connector 1/4inch to 1/8inch NPT. Female Connector, Material: Stainless Steel (A-Lok) fitting, Size: 1/4inch to 1/8inch NPT, Ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Female Connector 1/4inch to 1/4inch NPT. Female Connector, Material: Stainless Steel (A-Lok) fitting, Size: 1/4inch to 1/4inch NPT, Ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Female Connector 1/8inch to 1/8inch NPT. Female Connector, Material: Stainless Steel (A-Lok) fitting, Size: 1/8inch to 1/8inch NPT, Ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Male Connector 1/8inch to 1/4inch NPT. Male Connector, Material: Stainless Steel (A-Lok) fitting, Size: 1/8inch to 1/4inch NPT, Ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections

Tubing Straight 0.180in. Tubing, Straight, Deactivation: Sulfinert Treated, Material: Seamless 316L Grade Stainless Steel, Inner Dimensions: 0.180in, Outer Dimensions: 1/4in, this tubing can be cut to your exact requirements using a standard tubing cutter, for metal componentsunit: 6 feet roll

Tubing Straight 0.055in. Tubing, Straight, Deactivation: Sulfinert Treated, Material: Seamless 316L Grade Stainless Steel, Inner Dimensions: 0.055in, Outer Dimensions: 1/8in, this tubing can be cut to your exact requirements using a standard tubing cutter, for metal components6 feet roll

Tubing Welded/Drawn 0.085 in. Tubing, Welded/Drawn, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Dimensions: 0.085 in, Outer Dimensions: 1/8 in, Application: for providing carrier, fuel, make-up, or auxiliary gases to laboratory instrumentsunit: 100 feet roll

Port Connector, Size: 1/4 in, Material: Siltek/Sulfinert-Treated.

Port Connector, Size: 1/8 in, Material: Siltek/Sulfinert-Treated.

Tube End Reducer, Size: 1/4in to 1/16in NPT, Material: Siltek/Sulfinert-Treated.

Tube End Reducer, Size: 1/8in to 1/16in NPT, Material: Siltek/Sulfinert-Treated.

Metering Valve, straight, Material: Nickel-Plated Brass, Size: 1/8in.

Tube End Reducer, Size: 1/4in to 1/8in NPT, Material: Siltek/Sulfinert-Treated.

Tube End Reducer, Size: 1/8in to 1/4in NPT, Material: Siltek/Sulfinert-Treated.

Male Connector, Size: 1/8in to 1/4in NPT, Material: Siltek/Sulfinert-Treated.

Male Connector, Size: 1/4in to 1/4in NPT, Material: Siltek/Sulfinert-Treated.

Port Connector, Size: 1/8in to 1/4in, Material: Siltek/Sulfinert-Treated.

Tubing Welded/Drawn 0.04 in. Tubing, Welded/Drawn, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Dimensions: 0.04 in, Outer Dimensions: 1/16, Rinsed and Cleaned, Application: for providing carrier, fuel, make-up, or auxiliary gases to laboratory instrumentsunit: 100 feet roll

Syringe Adaptor Kit, for Single-Stage VOC Regulator, Use to withdraw sample from a high-pressure cylinder after pressure reduction through the high-purity VOC single-stage regulator

Ball Valve, 2-Way, Straight, Size: 1/4in, Material: Siltek/Sulfinert-Treated.

Ball Valve, 2-Way, Straight, Size: 1/8in, Material: Siltek/Sulfinert-Treated.

Plug Valve, 2-Way, Straight, Size: 1/4in, Material: Siltek/Sulfinert-Treated.

Plug Valve, 2-Way, Straight, Size: 1/8in, Material: Siltek/Sulfinert-Treated.

Ultra-High-Purity Regulator CGA 590. Ultra-High-Purity Regulator, Most stable outlet pressure control, Material: Stainless Steel, Type: Dual-Stage, Fittings: CGA 590 (Air), Outlet Gauge: 30in, 0 to 200 psig (0G1,379 kPa), Outlet Pressure: 0 to 150 psig (0G1,034 kPa),

Tube End Reducer, Size: 1/4in to 1/16in NPT, Material: Siltek/Sulfinert-Treated.

Tube End Reducer, Size: 1/8in to 1/16in NPT, Material: Siltek/Sulfinert-Treated.

Male Connector, Size: 1/4in to 1/8in NPT, Material: Siltek/Sulfinert-Treated.

Male Connector, Size: 1/4in to 1/4in NPT, Material: Siltek/Sulfinert-Treated.

Male Connector, Size: 1/8in to 1/8in NPT, Material: Siltek/Sulfinert-Treated.

Ultra-High-Purity Regulator CGA 350. Ultra-High-Purity Regulator, Oxidation-resistant, Identical gas purity protection, Material: Chrome-Plated Brass, Type: Single-Stage, Fittings: CGA 350 (H2, P5), Outlet Gauge: 30in, 0 to 200 psig (0G1,379 kPa), Outlet Pressure: 0 to 150 psig (0G1,034 kPa)

Male Quick Coupling, Size: 1/8in male Material: Stainless Steel.

Reducing Union, Size: 1/4in to 1/8in, Material: Stainless Steel.

Male Connector, Size: 1/16in to 1/8in NPT, Material: Siltek/Sulfinert-Treated.

Female Connector, Size:1/8in to 1/4in NPT, Material: Stainless Steel.

Female Connector, Size: 1/4in to 1/8in NPT, Material: Stainless Steel.

Female Connector, Size: 1/4in to 1/4in NPT, Material: Stainless Steel.

Female Quick Coupling, Size: 1/4in female, Material: Stainless Steel.

Female Quick Coupling, Size: 1/8in female, Material: Stainless Steel.

Protocol Station, Material: Chrome-Plated Brass, Fittings: CGA 590 (Air), is designed for convenient wall mounting of high-purity gas regulators. Wall mounting provides ease of use, prevents gas regulator damage, and improves safety, to prevent contamination

Protocol Station, Material: Chrome-Plated Brass, Fittings: CGA 350 (H2, P5), is designed for convenient wall mounting of high-purity gas regulators. Wall mounting provides ease of use, prevents gas regulator damage, and improves safety, to prevent contamination

Purification Kit, Includes: (4) 1/8in Stainless Steel connectors and (2) hydrocarbon/moisture traps, Type: Fuel Gas, Fittings: 1/8in Stainless Steel, High-purity output ensures, 99.9999% pure gas, brass or stainless steel, 1/4in or 1/8in, Triple gas trap is ideal

Protocol Station, Material: Chrome-Plated Brass, Fittings: CGA 580 (N2, He, Ar), is designed for convenient wall mounting of high-purity gas regulators. Wall mounting provides ease of use, prevents gas regulator damage, and improves safety, to prevent contamination

Tubing Welded/Drawn 0.21 in. Tubing, Welded/Drawn, Material: Instrument-Grade 304 Grade Stainless Steel, Inner Dimensions: 0.21in, Outer Dimensions: 1/4in, Rinsed and Cleaned, Application: for providing carrier, fuel, make-up, or auxiliary gases to laboratory instruments

WISP 96 Style Vial 8 x 40 mm. WISP 96 Style Vial, Type: Shell, Volume: 1.0 mL, Color: Amber, Material: Glass, Vial Size: 8 x 40 mm, Cap Size: 8 mm,

WISP 96 Style Vial 8 x 40 mm. WISP 96 Style Vial, Type: Shell, Volume: 1.0 mL, Color: Amber, Material: Glass, Vial Size: 8 x 40 mm, Cap Size: 8 mm,

WISP 96 Style Vial 8 x 40 mm. WISP 96 Style Vial, Type: Shell, Volume: 1.0 mL, Color: Clear, Material: Glass, Vial Size: 8 x 40 mm, Cap Size: 8 mm,

WISP 96 Style Vial 8 x 40 mm. WISP 96 Style Vial, Type: Shell, Volume: 1.0 mL, Color: Clear, Material: Glass, Vial Size: 8 x 40 mm, Cap Size: 8 mm,

Big Mouth Step Vial 12 x 32 mm. Big Mouth Step Vial, Modification: with White Graduated Marking Spot, Type: Screw-Thread, Volume: 2.0 mL, Color: Amber, Vial Size: 12 x 32 mm, Cap Size:10 mm/425, 40% larger opening than other vials, Preassembled caps, Designed for Waters Alliance autosamplers

Big Mouth Step Vial 12 x 32 mm. Big Mouth Step Vial, Modification: with White Graduated Marking Spot, Type: Screw-Thread, Volume: 2.0 mL, Color: Clear, Vial Size: 12 x 32 mm, Cap Size:10 mm/425, 40% larger opening than other vials, Preassembled caps, Designed for Waters Alliance autosamplers

Big Mouth Step Vial 12 x 32 mm. Big Mouth Step Vial, Modification: with White Graduated Marking Spot, Type: Screw-Thread, Volume: 2.0 mL, Color: Clear, Vial Size: 12 x 32 mm, Cap Size:10 mm/425, 40% larger opening than other vials, Preassembled caps, Designed for Waters Alliance autosamplers

Vial 2.0 mL. Vial, Modification:with 100 uL Glass Insert, Type:Screw-Thread, Volume:2.0 mL, Color:Clear, Material:Plastic, Cap Size:8 mm/425

Vial 2.0 mL. Vial, Modification:with 100 uL Polypropylene Insert, Type:Screw-Thread, Volume:2.0 mL, Color:Clear, Material:Plastic, Cap Size:8 mm/425

Mininert Precision Sampling Valve, Type: Screw-Thread, Cap Size: 18 mm/400, they are very convenient for repetitive sampling and limit content exposure to the silicon septum

Mininert Precision Sampling Valve, Type: Screw-Thread, Cap Size: 15 mm/425, they are very convenient for repetitive sampling and limit content exposure to the silicon septum

Insert 350 uL. Insert, Modification:Flat Bottom with ID Ring, Volume:250 uL, Material:Glass, for 2.0 mL, 8 mm Screw-Thread Vials

Insert 250 uL. Insert, Modification:Flat Bottom with ID Ring, Volume:250 uL, Material:Glass, for 2.0 mL, 8 mm Screw-Thread Vials

Insert 250 uL. Insert, Modification:Flat Bottom with ID Ring, Volume:250 uL, Material:Glass, for 2.0 mL, 8 mm Screw-Thread Vials

WISP 96 Style Vial 8 x 40 mm. WISP 96 Style Vial, Type:Shell, Volume:700 uL Limited Volume, Color:Clear, Material:Polypropylene, Vial Size:8 x 40 mm, Cap Size:8 mm

WISP 96 Style Vial 8 x 40 mm. WISP 96 Style Vial, Type:Shell, Volume:1.0 mL, Color:Clear, Material:Polypropylene, Vial Size:8 x 40 mm, Cap Size:8 mm

WISP 96 Style Vial 8 x 40 mm. WISP 96 Style Vial, Type:Shell, Volume:1.0 mL, Color:Clear, Material:Polypropylene, Vial Size:8 x 40 mm, Cap Size:8 mm

Big Mouth Step Vial Kit (Preassembled), Includes:Clear 2.0 mL Vial, Black Cap, PTFE/Silicone/Red PTFE Septa, 0.040in, Caps attached to vials

Big Mouth Step Vial Kit (Preassembled), Includes:Clear 2.0 mL Vial, Black Cap, PTFE/Silicone/Red PTFE Septa, 0.040in, Caps attached to vials

Crimp Vial Convenience Kit, Includes: Amber 2.0 mL Vial, Deactivated, Silver Seal, PTFE/Natural Rubber Septa

Crimp Vial Convenience Kit, Includes: Amber 2.0 mL Vial, Deactivated, Silver Seal, PTFE/Natural Rubber Septa

Short Screw Cap 9mm. Short Screw Cap, Polypropylene, preassembled, Type:Screw-Thread, Color:Mixed, Septa Material:PTFE/Silicone/PTFE, volume: 2 ml, size: 9mm

Short Screw Cap 9mm. Short Screw Cap, Polypropylene, preassembled, Type:Screw-Thread, Color:Mixed, Septa Material:PTFE/Silicone, volume: 2 ml, size: 9mm

Septum Insertion Tool, Replacement Parts and Accessories for Mininert Precision Sampling Valves for Vials

Replacement Septa 24 mm x 0.125in. Replacement Septa, 24 mm x 0.125in,Septa Material:PTFE-lined silicone, for VOA Sampling Vials, 60 mL Sample Collection Vials, and 250 mL Sample Collection Bottles

Vial 12 x 32 mm. Vial, Modification:with yellow Graduated Marking Spot, Type:Crimp-Top, Volume:2.0 mL, Color:Clear, Material:Glass, Vial Size:12 x 32 mm, Cap Size:11 mm

Vial 12 x 32 mm. Vial, Modification:with rust Graduated Marking Spot, Type:Crimp-Top, Volume:2.0 mL, Color:Clear, Material:Glass, Vial Size:12 x 32 mm, Cap Size:11 mm

Vial 12 x 32 mm. Vial, Modification:with green Graduated Marking Spot, Type:Crimp-Top, Volume:2.0 mL, Color:Clear, Material:Glass, Vial Size:12 x 32 mm, Cap Size:11 mm

Vial 12 x 32 mm. Vial, Modification:with Blue Graduated Marking Spot, Type:Crimp-Top, Volume:2.0 mL, Color:Clear, Material:Glass, Vial Size:12 x 32 mm, Cap Size:11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: yellow, Septa Material: PTFE/Red sillicone, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: yellow, Septa Material: PTFE/Red sillicone, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: red, Septa Material: PTFE/silicone, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: red, Septa Material: PTFE/silicone, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: green, Septa Material: PTFE/silicone, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: green, Septa Material: PTFE/silicone, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: Blue, Septa Material: PTFE/Silicone, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: Blue, Septa Material: PTFE/Silicone, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: yellow, Septa Material: PTFE/Red Rubber, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: red, Septa Material: PTFE/Red Rubber, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: green, Septa Material: PTFE/Red Rubber, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Seal with Septa 11 mm. Seal with Septa, Type: Crimp-Top, Color: Blue, Septa Material: PTFE/Red Rubber, Material: Aluminum, volume: 2.0 mL, size: 11 mm

Precleaned VOA Vial 40 mL. Precleaned VOA Vial, Type: Screw-Thread, Volume: 40 mL, Color: clear, Material: Glass, Container, liner, and closure cleaned, assembled, and lot traceable, Open-top caps, PTFE faced 0.125in silicone septa, Cap Size: 24 mm/400

Precleaned VOA Vial 40 mL. Precleaned VOA Vial, Type: Screw-Thread, Volume: 40 mL, Color: Amber, Material:Glass, Container, liner, and closure cleaned, assembled, and lot traceable, Open-top caps, PTFE faced 0.125in silicone septa, Cap Size: 24 mm/400

Insert for WISP 48 Vial 500 uL. Insert for WISP 48 Vial, Modification:Flat Bottom, Volume:500 uL, for 4.0 mL WISP 48 Screw-Thread Step Vials

Insert for WISP 48 Vial 500 uL. Insert for WISP 48 Vial, Modification:Flat Bottom, Volume:500 uL, for 4.0 mL WISP 48 Screw-Thread Step Vials

Insert 350 uL. Insert, Modification:Flat Bottom, Volume:350 uL, Material:Glass, for 2.0 mL, 10 mm Big Mouth Step Design Screw-Thread Vials

Starburst Snap Plug 8 x 40 mm. Starburst Snap Plugs for Shell Vials, 1.0 mL WISP 96 Style, Modification: Silicone-Lined, Type: Shell, Color: Clear, Material: Polyethylene, size: 8 x 40 mm

Starburst Snap Plug 8 x 40 mm. Starburst Snap Plugs for Shell Vials, 1.0 mL WISP 96 Style, Modification: Silicone-Lined, Type: Shell, Color: Clear, Material: Polyethylene, size: 8 x 40 mm

Starburst Snap Plug 8 x 40 mm. Starburst Snap Plugs for Shell Vials, Modification: conical, Type: Shell, Color: Clear, Material: Polyethylene, size: 8 x 40 mm

Starburst Snap Plug 8 x 40 mm. Starburst Snap Plugs for Shell Vials, Type: Shell, Color: Clear, Material: Polyethylene, size: 8 x 40 mm

Starburst Snap Plug 8 x 40 mm. Starburst Snap Plugs for Shell Vials, Type: Shell, Color: Clear, Material: Polyethylene, size: 8 x 40 mm

Pressure Release Seal with Septa 20 mm. Pressure Release Seals wih Septa, 20 mm, preassembled, Type: Crimp-Top, Color: Silver, Septa Material: PTFE/silicone, Material: Aluminum

Pressure Release Seal with Septa 20 mm. Pressure Release Seals wih Septa, 20 mm, preassembled, Type: Crimp-Top, Color: Silver, Septa Material: PTFE/Gray Butyl Rubber, Material: Aluminum

WISP 48 Seal with Septa 13 mm. WISP 48 Seal with Septa, Type: Crimp-Top, Color: Silver, Septa Material: PTFE/Silicone, Material: Aluminum, size: 13mm, for 4.0 mL WISP Crimp-Top Vials

WISP 48 Seal with Septa 13 mm. WISP 48 Seal with Septa, Type: Crimp-Top, Color: Silver, Septa Material: PTFE/Butyl Rubber, Material: Aluminum, size: 13mm, for 4.0 mL WISP Crimp-Top Vials

WISP 48 Seal with Septa 13 mm. WISP 48 Seal with Septa, Type: Crimp-Top, Color: Silver, Septa Material: PTFE/Butyl Rubber, Material: Aluminum, size: 13mm, for 4.0 mL WISP Crimp-Top Vials

Septa, Material:Red PTFE/Silicone/PTFE, 0.040in, Size:13 mm x 0.040in.

Septa, Material:Red PTFE/Silicone, 0.060in, Size:13 mm x 0.060in.

WISP 48 Cap and Septa, Preassembled, Type: Screw-Thread, Septa Material: Red PTFE/Silicone.

WISP 48 Cap and Septa, Preassembled, Type: Screw-Thread, Septa Material: Red PTFE/Silicone.

WISP 48 Cap and Septa, Preassembled, Type: Screw-Thread, Septa Material: Red PTFE/Silicone, 0.065in.

WISP 48 Cap, Type:Screw-Thread, Material:Black Polypropylene, Open-Hole.

Snap Ring Cap with Liner, Type:Snap-Top, Color:Clear, Septa Material:PTFE, 10 mil, Material:PTFE/Butyl Rubber, Snaps on any crimp-style vial

Snap Ring Cap with Liner, Type:Snap-Top, Color:Clear, Septa Material:PTFE, 10 mil, Material:Polypropylene, Snaps on any crimp-style vial

Snap Ring Cap with Liner, Type:Snap-Top, Color: Clear, Septa Material: PTFE, 10 mil, Material: Polypropylene, Snaps on any crimp-style vial

Poly Crimp Seal and Liner 11 mm. Poly Crimp Seals and Liner, Type: Crimp-Top, Color: Mixed, Septa Material: PTFE/Silicone/PTFE, Volume: 2.0 mL, size: 11 mm, versatile, working as either a snap-on or crimp-top cap, use a standard crimping tool to secure the Poly Crimp seal onto any crimp-top vial

Aluminum Seal with Septa, size: 11mm, 5 Asst Colors, Septa material: PTFE Silicone.

Cap and Septa, Preassembled, Type: Screw-Thread, Septa Material: PTFE/Silicone/PTFE, 0.040in.

Cap and Septa 12 x 32 mm. Cap and Septa, Preassembled, Type:Screw-Thread, Modification:Top Hat, Color:Black, Septa Material:PTFE/Silicone, size: 12 x 32 mm, Fit all 2.0 mL, for 8 mm/425 vial-based autosamplers

Cap and Septa 12 x 32 mm. Cap and Septa, Preassembled, Type: Screw-Thread, Modification: Top Hat, Color:Black, Septa Material:PTFE/Silicone, size: 12 x 32 mm, Fit all 2.0 mL, for 8 mm/425 vial-based autosamplers

Crimp Vial Convenience Kit, Includes:Clear 2.0 mL Vial, Untreated, Silver Seal, PTFE/Natural Rubber Septa

Autosampler Vial Convenience Kit, Includes: Amber 2.0 mL Vial, Untreated, Black Cap, Red PTFE/Silicone Septa, 0.065in

Autosampler Vial Convenience Kit, Includes: Clear 2.0 mL Vial, Untreated, Black Cap, Red PTFE/Silicone Septa, 0.065in

Septa, Septa Material:Red PTFE/Silicone, Size:8 mm x 0.060 in.

Cap 12 x 32 mm. Cap, Type:Screw-Thread, Modification: Open-Hole, Color: Black, Material: Polypropylene, size: 12 x 32 mm, or 2.0 mL, 8 mm Screw-Thread Vials, vial-based autosamplers

Headspace Vial 6 mL. Headspace Vial, Modification:Flat Bottom, Type:Crimp-Top, Volume:6 mL, Color:Clear, Vial Size:22 x 38 mm, Cap Size:20 mm

Headspace Vial 6 mL. Headspace Vial, Modification:Flat Bottom, Type:Crimp-Top, Volume:6 mL, Color:Clear, Vial Size:22 x 38 mm, Cap Size:20 mm

Headspace Vial 10 mL. Headspace Vial, Modification:Rounded Bottom, Deactivated, Type:Crimp-Top, Volume:10 mL, Color:Clear, Vial Size:23 x 46 mm, Cap Size:20 mm

Headspace Vial 10 mL. Headspace Vial, Modification:Rounded Bottom, Type:Crimp-Top, Volume:10 mL, Color:Clear, Vial Size:23 x 46 mm, Cap Size:20 mm

Headspace Vial 20 mL. Headspace Vial,Modification:Rounded Bottom,Type:Crimp-Top,Volume:20 mL,Color:Clear,Vial Size:23 x 75 mm,Cap Size:20 mm

Headspace Vial 27 mL. Headspace Vial,Modification: Flat Bottom,Type: Crimp-Top,Volume:27 mL,Color: Clear,Vial Size: 30 x 60 mm,Cap Size:20 mm

Headspace Vial 27 mL. Headspace Vial, Modification: Flat Bottom,Type: Crimp-Top, Volume: 27 mL, Color: Clear,Vial Size: 30 x 60 mm,Cap Size: 20 mm

Septa, Septa Material: Red PTFE/White Silicone, size: 0.060in for 2.0 mL Big Mouth Step Vials.

Septa, Material: Red PTFE/White Silicone, Size: 8 mm x 0.065in.

Short-Cap Vial 2.0 mL. Short-Cap Vial, Modification: with White Graduated Marking Spot, IP Deactivated, Type: Screw-Thread, Volume: 2.0 mL, Color: Amber, Vial Size: 12 x 32 mm, Cap Size: 9 mm

Micro-Vial Open Top Cap (attached) 3.0 mL. Micro-Vial, Open Top Cap (attached), Modification: with Graduated Marking Spot, Type: Screw-Thread, Volume: 3.0 mL, Color: Clear, Material: Borosilicate Glass, Cap Size: 20 mm/400, Tapered for high recovery of contents, Work with Mininert sampling valves

Micro-Vial Open Top Cap (attached) 1.0 mL. Micro-Vial, Open Top Cap (attached), Modification: with Graduated Marking Spot, Type: Screw-Thread, Volume: 1.0 mL, Color: Clear, Material: Borosilicate Glass, Cap Size: 13 mm/42, Tapered for high recovery of contents, Work with Mininert sampling valves

Vial 2.0 ml. Vial, Modification: with 100 uL Polypropylene Insert, Type: Screw-Thread, Volume: 2.0 mL, Color: Clear, Material: Plastic, Cap Size: 8 mm/425, Choice of glass or fused polypropylene insert

Vial 2.0 mL. Vial, Modification: withWhite Graduated Marking Spot, Type: Screw-Thread, Volume: 2.0 mL, Color: Amber, Vial Size: 12 x 32 mm, Cap Size: 8 mm/425

Vial 2.0 mL. Vial, Modification: with White Graduated Marking Spot, Type: Screw-Thread, Volume: 2.0 mL, Color: Clear, Vial Size: 12 x 32 mm, Cap Size: 8 mm/425,

Big Mouth Insert 250 uL. Big Mouth Insert, Modification: No Spring, Volume: 250 uL, for 2.0 mL, 11 mm Crimp-Top and 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials

Insert 250 uL. Insert, Modification: No Spring, Volume: 100 uL, Material: Polypropylene, Application: for 2.0 mL, 8 mm Screw-Thread Vials

Insert 250 uL. Insert, Modification: Flat Bottom, Volume: 250 uL, Material: Glass, Application: for 2.0 mL, 8 mm Screw-Thread Vials

Insert 100 uL. Insert, Modification: with Polypropylene Bottom Spring, Volume: 100 uL, Material: Glass, for 2.0 mL, 8 mm Screw-Thread Vials

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Yellow, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Natural, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Natural, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Green, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Black, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Black, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Yellow, Septa Material: PTFE/Silicone, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume taken)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Green, Septa Material: PTFE/Silicone, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume taken)

Poly Crimp Seals and Liner (Snap-On or Crimp) 2.0 mL, 11 mm, Type: Crimp-Top, Color: Blue, Septa Material: PTFE/Silicone/PTFE, versatile, working as either a snap-on or crimp-top cap, Simply use standard crimping tool to secure Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner (Snap-On or Crimp) 2.0 mL, 11 mm, Type: Crimp-Top, Color: Blue, Septa Material: PTFE/Silicone/PTFE, versatile, working as either a snap-on or crimp-top cap, Simply use standard crimping tool to secure Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner (Snap-On or Crimp) 2.0 mL, 11 mm, Type: Crimp-Top, Color: Clear, Septa Material: PTFE/Silicone/PTFE, versatile, working as either a snap-on or crimp-top cap, Simply use standard crimping tool to secure Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner (Snap-On or Crimp) 2.0 mL, 11 mm, Type: Crimp-Top, Color: Blue, Septa Material: PTFE/Silicone, versatile, working as either a snap-on or crimp-top cap, Simply use standard crimping tool to secure Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner (Snap-On or Crimp) 2.0 mL, 11 mm, Type: Crimp-Top, Color: Clear, Septa Material: PTFE/Silicone, versatile, working as either a snap-on or crimp-top cap, Simply use standard crimping tool to secure Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner, Type: Crimp-Top, Color: Clear, Septa Material: PTFE/Butyl Rubber, 2.0 mL, 11 mm, Snap-On or Crimp, versatile, use a standard crimping tool to secure the Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner, Type: Crimp-Top, Color: Clear, Septa Material: PTFE/Butyl Rubber, 2.0 mL, 11 mm, Snap-On or Crimp, versatile, use a standard crimping tool to secure the Poly Crimp seal onto any crimp-top vial

Mininert Precision Sampling Valve for Vials, Type: Crimp-Top, Cap Size: 20 mm, very convenient for repetitive sampling and limit content exposure to the silicon septum, crimp-top valve for 20 mm ID glassware slides into the neck of the vial

Mininert Precision Sampling Valve for Vials, Type: Screw-Thread, Cap Size: 24 mm/400, very convenient for repetitive sampling and limit content exposure to the silicon septum, Turn the threaded flange to secure a tight fit

Mininert Precision Sampling Valve for Vials, Type: Screw-Thread, Cap Size: 20 mm/400, very convenient for repetitive sampling and limit content exposure to the silicon septum, Turn the threaded flange to secure a tight fit

Crimp Vial Convenience Kit, for 2.0 mL, 11 mm Crimp-Top Vials, Includes: Clear 2.0 mL Vial, Untreated, Silver Seal, PTFE/Silicone Septa, Vials packaged in a clear-lid tray with Caps and septa

Crimp Vial Convenience Kit, for 2.0 mL, 11 mm Crimp-Top Vials, Includes: Clear 2.0 mL Vial, Untreated, Silver Seal, PTFE/Silicone Septa, Vials packaged in a clear-lid tray with Caps and septa

Big Mouth Step Vial Kit (Preassembled), with Black Cap, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference chart for 2.0 mL, 10 mm Screw-Thread Vial

Big Mouth Step Vial Kit (Preassembled), with Black Cap, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference chart for 2.0 mL, 10 mm Screw-Thread Vial

Big Mouth Step Vial Kit (Preassembled), with Black Cap, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference chart for 2.0 mL, 10 mm Screw-Thread Vial

Big Mouth Step Vial Kit (Preassembled), with Black Cap, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference chart for 2.0 mL, 10 mm Screw-Thread Vial

Autosampler Vial Convenience Kit, for 2.0 mL, 8 mm Screw-Thread Vials, Includes: Clear 2.0 mL Vial, Silcote Deactivated, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, Vials packaged in a clear-lid tray with Preassembled caps and septa

Autosampler Vial Convenience Kit, for 2.0 mL, 8 mm Screw-Thread Vials, Includes: Clear 2.0 mL Vial, Silcote Deactivated, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, Vials packaged in a clear-lid tray with Preassembled caps and septa

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Screw-Thread Vial Kit (Preassembled), 8 mm/425 Screw-Thread, Unmarked Vials, Septa and Cap, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065, Caps attached to vial, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.045inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.045 inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.045 inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.045inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Short Screw Cap, Type: Screw-Thread, Color: Mixed, Septa Material: PTFE/Butyl Rubber, 2.0 mL, 9 mm Short-Cap, Screw-Vial Closure (preassembled)

WISP 48 Snap Seal Vial, For an instrument reference for 4.0 mL WISP 48 Style Vial, Modification: with White Graduated Marking Spot, Type: Crimp-Top, Volume: 4.0 mL, Color: Clear, Vial Size: 15 x 45 mm, Cap Size: 13 mm

WISP 48 Snap Seal Vial, For an instrument reference for 4.0 mL WISP 48 Style Vial, Modification: with White Graduated Marking Spot, Type: Crimp-Top, Volume: 4.0 mL, Color: Clear, Vial Size: 15 x 45 mm, Cap Size: 13 mm

WISP Step Vial. WISP 48 Step Vial, For an instrument reference for 4.0 mL WISP 48 Style Vial, Modification: with White Graduated Marking Spot, Type: Screw-Thread, Volume: 4.0 mL, Color: Amber, Vial Size: 15 x 45 mm, Cap Size: 13 mm/425

WISP Step Vial. WISP 48 Step Vial, For an instrument reference for 4.0 mL WISP 48 Style Vial, Modification: with White Graduated Marking Spot, Type: Screw-Thread, Volume: 4.0 mL, Color: Clear, Vial Size: 15 x 45 mm, Cap Size: 13 mm/425

Crimp Vial Convenience Kit, for 2.0 mL, 11 mm Crimp-Top Vials, Includes: Amber 2.0 mL Vial, Untreated, Silver Seal, PTFE/Silicone Septa, Vials packaged in a clear-lid tray with Caps and septa

Crimp Vial Convenience Kit, for 2.0 mL, 11 mm Crimp-Top Vials, Includes: Amber 2.0 mL Vial, Untreated, Silver Seal, PTFE/Silicone Septa, Vials packaged in a clear-lid tray with Caps and septa

LC Piston Seal Insertion Tool, Simplify pump maintenance: use one end to remove your old seal, slip your new seal on the other end and push it flush into position. The tool cannot mar the surrounding metal surface of the pump housing

Super Seal for Analytical Heads, for HPLC Systems, Model Number: M6KA,1515, 1525, 510, 515, 590, 600, 610, LC Module 1

Mini pHPerch Storage Unit, Size: 13 x 12 x 6 inch, Designed for pH meter supplies, Small footprint, high storage capacity, easy access, built-in wiper dispenser

Pack in a Box Kit, complete column-packing system, Pressure ( maximum): 10,000 psi, HPLC Column Packing Station Includes pump, 20 mL reservoir, column hardware (150 x 4.6 mm, tubing with end-fittings, frits, nuts and ferrules, empty columns) and system control software

Seal Wash Kit (2 seals, 2 gaskets), for HPLC Systems, Model Number: 1050, 1100, 1200.

Outlet Cap and Gold Seal Assembly Tool for 1050, 1100 HPLC Systems, Easily install the gold seal into the outlet cap, For use with gold disk seal only

Seal Gold Disk. Seal, Gold Disk (outlet), for HPLC Systems, Model Number: 1050, 1100, 1200, Not compatible for use with Outlet Cap and Gold Seal Assembly Tool

Joint Sleeve, 40/35 joint, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: PTFE, For Membrane Microfiltration Glassware, autoclavable

ValvTool Wrench, time-saving device that provides easy access to many hard-to-reach Rheodyne or Valco valves. For 1/4 inch nuts

Piston Seal. ASI Piston Seal for HPLC System, Model Number: 1050, 1100, Material: PTFE with an additive that reduces their tendency to cold flow and improves their wear characteristics, more resistant to any HPLC solvent than UHMWPE seals, but they are less wear-resistant and rugged

UltraShield UHPLC PreColumn Filter, Porosity: 0.5 um frit, Inlet/Outlet: Female/Male 10-32, Universal fit, Pressure: 15,000 psi, Filter: 0.5 um or 0.2 um titanium frit in a stainless steel body with PEEK ferrule, Wrench Flat: 5/16 inch, Cost-effective protection

Plunger Rinse Seal, for HPLC Systems, Model Number: LC-10Ai, LC-10AS, LC-10AT, LC-10ATvp.

Plunger Seal, Black, for HPLC Systems, Model Number: 1515, 1525, 510, 515, 600, 610, LC Module 1, Graphite-filled PTFE; best for organic solvents, Ultra-high molecular weight polyethylene increased resistance to abrasion, best for buffers

Check Valve Housing. PerformancePLUS Check Valve Housing, for HPLC Systems, Model No: 1515, 1525, 510, 515, 525, 600, 610

Piston Seal, Black, ASI for HPLC System, Model Number: 1050, 1100, Material: PTFE with an additive that reduces their tendency to cold flow and improves their wear characteristics, more resistant to any HPLC solvent than UHMWPE seals, but they are less wear-resistant and rugged

Organizer. Deluxe BenchBooster Organizer, Ten compartments, plus a wiper dispenser, Lightweight, movable, wall-mountable, Size: 24 x 7 x 12 inch

Flask Cap, 40/35 Outer Joint, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Isolation Seal for HPLC Systems: Rheodyne Style, Model Number: 7010.

FlatLine Pulse Damper, Size: 1.5 inch W x 3.75 inch L, Rupture-proof, no diaphragm-minimal risk of failure or leaks, Clean flush-out design-no sample carryover, Low internal volume-negligible effect on analyte bandwidth, Standard 10-32 inlet and outlet ports

Open Supply Bin, Size: 12 x 16 x 10.5 inch (5-Bin Unit), Multiple-bin units for large/small items, Used individually or end-to-end along bench

Open Supply Bin, Size: 24 x 12 x 10 inch (4-Bin Unit), Multiple-bin units for large/small items, Used individually or end-to-end along bench

TopLoader BalanceBank Storage Unit, Size: 12 x 12 x 7 inch, Provides easy access to wipers, weigh papers, boats and spatulas, Creates a neat, highly functional weighing area and workstation

Survival Kit for HPLC, Material: Stainless Steel, For start-up and maintenance in all HPLC systems, contains a wide range of tubing, fittings and tools, selection of lengths and IDs of 1/16-inch tubing, plus nuts, ferrules, a ValvTool wrench and a zero-dead-volume union

Column End-Fitting with Flat Bottom, Fittings with flat bottom are intended for use on 1.0-3.0 mm ID HPLC columns, 1/4 inch compression end-fittings are compatible with 1/16 inch connecting tubing using Valco and Parker fittings

HPLC Frit 1/4 inch, Internal Diameter: 3.2 mm, Porosity: 0.5 um, chromatographic-grade 316 stainless steel, to fit most column and pore sizes

HPLC Frit 1/4 inch, Internal Diameter: 4.6 mm, Porosity: 0.5 um, chromatographic-grade 316 stainless steel, to fit most column and pore sizes

Guard Cartridge Holder. Holder for 10 mm guard cartridge, Trident HPLC In-Line Guard Cartridge Holder, used with almost any HPLC column by connecting it with a short piece of 1/16 inch tubing, appropriate nuts and ferrules or finger-tight fittings

Outlet Cap and Gold Seal Assembly, for HPLC Systems, Model Number: 1050, 1100, 1200, Caps and seals unassembled, Not compatible for use with Outlet Cap and Gold Seal Assembly Tool

UltraShield UHPLC PreColumn Filter, Porosity: 0.2 um frit, Inlet/Outlet: Female/Male 10-32, Universal fit, Pressure: 15,000 psi, Filter: 0.5 um or 0.2 um titanium frit in a stainless steel body with PEEK ferrule, Wrench Flat: 5/16 inch, Cost-effective protection

Seal Wash Plunger Seal, for HPLC Systems, Model Number: 2690, 2695, 2790, 2795.

Check Valve Cartridge, for HPLC Systems, Model Number: 2690, 2695, 2790, 2795.

Flask 1000 mL. Flask, 40/35 Joint, Size: 1000 mL, 47 mm filtration apparatus with fritted glass support for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Sapphire Plunger Assembly Kit, for HPLC Systems, Includes: sapphire plunger, pivot insert, pivot guide, washer, spring, retaining ring, Model Number: 515, 1515, 1525

Graduated Safety-Coated Bottle, GL-45 threads, Size: 2L.

Graduated Safety-Coated Bottle, GL-45 threads, Size: 1L.

Secure-Fit Fitting Single Connector. Secure-Fit Fitting, Single Connector, ID: 0.005 inch, Length: 6 cm, Material: Stainless Steel, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

PEEK Tip for CPI Fitting, Replacement parts for the Trident Direct Column Protection System.

Guard Cartridge Holder. Holder with filter for 10 mm guard cartridge, Trident HPLC In-Line Guard Cartridge Holder, used with almost any HPLC column by connecting it with a short piece of 1/16 inch tubing, appropriate nuts and ferrules or finger-tight fittings

Flask 4000 mL. Flask, 40/35 Joint, Size: 4000 mL, 47 mm filtration apparatus with fritted glass support for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Flask 2000 mL. Flask, 40/35 Joint, Size: 2000 mL, 47 mm filtration apparatus with fritted glass support for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

UltraShield UHPLC PreColumn Filter, Porosity: 0.2 um frit, Inlet/Outlet: Female/Male 10-32, Universal fit, Pressure: 15,000 psi, Filter: 0.5 um or 0.2 um titanium frit in a stainless steel body with PEEK ferrule, Wrench Flat: 5/16 inch, Cost-effective protection

PEEK Tubing Elbow, Size: 90 deg, ideal for routing 1/16 inch PEEK tubing through system. Simply snap the tubing into the elbow. Prevent pinching of PEEK tubing, which can cause high pressure

Secure-Fit Fitting Single Connector. Secure-Fit Fitting, Single Connector, ID: 0.007 inch, Length: 30 cm, Material: Stainless Steel, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

Secure-Fit Fitting Single Connector. Secure-Fit Fitting, Single Connector, ID: 0.005 inch, Length: 10 cm, Material: Stainless Steel, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

Aluminum Clamp, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

PEEK Tubing Elbow, Size: 180 deg, ideal for routing 1/16 inch PEEK tubing through system. Simply snap the tubing into the elbow. Prevent pinching of PEEK tubing, which can cause high pressure

Deuterium Lamp, for HPLC Systems, Model Number: SPD-10, 10A, 10AVvp, SPD-20A, SPD-20AV.

Ferrule for use with Secure-Fittings, Size: 1/16 inch, Material: Stainless Steel.

Sapphire Plunger for HPLC Systems, Model Number: 2690, 2695, 2790, 2795, 2796.

Plunger Seal, Material: Polyethylene, Gold, for HPLC Systems, Model Number: LC-10Ai, 10AS, 10AT, 10ATvp, LC-7A, Graphite-filled PTFE; best for organic solvents, Ultra-high molecular weight polyethylene increased resistance to abrasion, best for buffers

Seal Wash Kit, Binary Pump (4 seals, 4 gaskets), for HPLC Systems, Model Number: 1050, 1100, 1200.

Plunger Seal, Black, for HPLC Systems, Model Number: LC-10AD, 10ADvp, LC-20AD/AB, LC-600, LC-2010 A/C HT, LC-9A, Graphite-filled PTFE; best for organic solvents, Ultra-high molecular weight polyethylene increased resistance to abrasion, best for buffers

Hand-Tight Fitting. EXP Hand-Tight Fitting (Nut with Hybrid Ferrule), Reusable Fittings for HPLC & UHPLC for 10-32 fittings and 1/16 inch tubing, Hand-tight fitting style achieves effortless HPLC seals, Compatible with 1/16 inch PEEK and stainless steel tubing, ZDV (zero dead volume) connection

Head Plunger Seals, Gold, for HPLC Systems, Model Number: 2690, 2695, 2790, 2795.

Check Valve Cartridge. PerformancePLUS Check Valve Cartridge, for HPLC Systems, Model Number: 1515, 1525, 2690, 2695, 2795, 510, 515, 600, 610

Glove Box Dispenser, Size: 15 1/8 x 11 x 4 1/4 inch (Triple), Fit most glove boxes; allow quick access, Include holes on back plate for permanent mounting (hardware not included)

Funnel 300 mL. Funnel, Size: 300 mL, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

In-Line Mixer 50ul. In-Line Mixer, HyperShear Static, Material: Stainless Steel, Volume: 50uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

Secure-Fit Fitting Two Connector. Secure-Fit Fitting, Two Connector, ID: 0.007 inch, Length: 10 cm, Material: Stainless Steel, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

Microfiltration Glassware. Funnel 300ml Flask 1000ml, For Membrane Microfiltration Glassware, 47 mm filtration apparatus with fritted glass support is for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, autoclavable

Hand-Tight Fitting. EXP Hand-Tight Fitting (Nut with Hybrid Ferrule), Reusable Fittings for HPLC & UHPLC for 10-32 fittings and 1/16 inch tubing, Hand-tight fitting style achieves effortless HPLC seals, Compatible with 1/16 inch PEEK and stainless steel tubing, ZDV (zero dead volume) connection

Blade Replacement for Clean-Cut Tubing Cutter.

Cap Frits Replacement for Trident Guard Cartridges, Internal Diameter: 2 mm, Porosity: 2.0 um, prevent clogged cartridges to extend the life of column, cartridge

UltraShield UHPLC PreColumn Filter, Porosity: 0.5 um frit, Inlet/Outlet: Female/Male 10-32, Universal fit, Pressure: 15,000 psi, Filter: 0.5 um or 0.2 um titanium frit in a stainless steel body with PEEK ferrule, Wrench Flat: 5/16 inch, Cost-effective protection

Vespel Rotor Seal for HPLC Systems: Rheodyne Style, Model Number: 7125, 7126, 7725, 7725i, 9725.

Vespel Rotor Seal for HPLC Systems: Rheodyne Style, Model Number: 1090, 7000, 7010, 7040, 7067.

MiniPulse Pulse Dampener, Material: Stainless Steel, Compact unit (2.5x 1.5inch), Small, 160 uL dead volume at atmospheric pressur, Can withstand pressures to 6,000 psi (41,369 kPa), Improve system baseline stability while increasing the total system volume by only 160 uL

Open Supply Bin, Size: 12 x 12 x 7.5 inch (13-Bin Unit), Multiple-bin units for large/small items, Used individually or end-to-end along bench

Column End-Fitting with Distribution Cone, Fittings with distribution cone are intended for use on 3.0-4.6 mm ID HPLC columns, 1/4 inch compression end-fittings are compatible with 1/16 inch connecting tubing using Valco and Parker fittings

XG Fitting 1cm for Trident Integral Guard System, Convenient and economical leak-free guard cartridge system, extremely easy to install, Versatile configuration protects against all levels of contamination, Integral design eliminates troublesome tubing connections

XF Filter Fitting Replacement for Trident Integral Guard System, Convenient and economical leak-free guard cartridge system, Versatile configuration protects against all levels of contamination, Integral design eliminates troublesome tubing connections

Piston Seals, PTFE with Graphite, Black, for HPLC Systems, Model Number: 1050, 1100, 1200, Graphite-filled PTFE; best for organic solvents

Plunger Seal, Gold, for HPLC Systems, Model Number: 1515, 1525, 510, 515, 600, 610, LC Module 1, Graphite-filled PTFE; best for organic solvents, Ultra-high molecular weight polyethylene increased resistance to abrasion, best for buffers

In-Line Mixer 250ul. In-Line Mixer, HyperShear Static, Material: Stainless Steel, Volume: 250 uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

In-Line Mixer 150ul. In-Line Mixer, HyperShear Static, Material: Stainless Steel, Volume: 150 uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

Inlet Check Valve, for HPLC Systems, Model Number: LC-600, LC-9A, LC-10AD.

Secure-Fit Fitting Single Connector. Secure-Fit Fitting, Single Connector, ID: 0.007 inch, Length: 30 cm, Material: PEEK, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

Secure-Fit Fitting Single Connector. Secure-Fit Fitting, Single Connector, ID: 0.007 inch, Length: 20 cm, Material: PEEK, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

Pump Piston Rod. ASI Replacement HPLC Pump Piston Rod, for HPLC System, Material: Sapphire, Model Number: 1090, Buffer salts and metals from HPLC system become imbedded on the surface of the piston seal and gradually wear the surface of the piston rod, Worn regions will quickly destroy pump seal

Funnel 1000 mL. Funnel, Size: 1000 mL, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Fritted Glass Support, 40/35 Joint, 47 mm filtration apparatus with fritted glass support for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Funnel 500 mL. Funnel, Size: 500 mL, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Funnel 100 mL. Funnel, Size: 100 mL, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Head Plunger Seals, Black, for HPLC Systems, Model Number: 2690, 2695, 2790, 2795.

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 50 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 30 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

Autosampler 717 PM Kit, Preventive Maintenance Kit for HPLC Systems, Model Number: 717 Autosampler, Includes: seal pack assembly, tube assembly(0.020 inch ID), needle compression screw, 0.062 stainless steel ferrule, pre-column filter assembly, insert, 250uL WISP syringe

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 50 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 30 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Binary Fixed, Post Column, Split Ratio: 5: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 250 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 200 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 150 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 100 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 250 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 200 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 150 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 100 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Replacement Fixed Resistor Set, Post Column, Split Ratio: 5: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Binary Fixed, Post Column, Split Ratio: 10: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Replacement Fixed Resistor Set, Post Column, Split Ratio: 10: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Replacement Fixed Resistor Set, Post Column, Split Ratio: 20: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Binary Fixed, Post Column, Split Ratio: 20: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Binary Fixed, Post Column, Split Ratio: 50: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Pump 600 PM Kit, Preventive Maintenance Kit for HPLC Systems, Model Number: 600 Pump, Includes: PerformancePLUS cartridges, sparge diffusers, Super Seals, solvent reservoir 10 um filters, sapphire plungers, reference valve button, valve disk spacer, valve disk, TFE ball plug

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Binary Fixed, Post Column, Split Ratio: 100: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, Type: Replacement Adjustable Resistor Set, Post Column, Split Ratio: 1: 1 to 20: 1, pressure limit: 5,000 psi, Total flow: 0.1-5.0 mL/min, Adjustable metering valve gives convenient control of split ratio, Low dead volume

Autosampler PM Kit and 2690/2695 Pump, Preventive Maintenance Kit for HPLC Systems, Model Number: 2690, 2695

Flow Splitter. QuickSplit Post-Column Flow Splitter, Type: Replacement Adjustable Resistor Set, Post Column, Split Ratio: 5: 1 to 100: 1, pressure limit: 5,000 psi, Total flow: 0.1-5.0 mL/min, Adjustable metering valve gives convenient control of split ratio, Low dead volume

Vu2 Union Connector Kit, Fits Column ID: 0.32 mm, Includes: Vu2 Union body, knurled nuts (2), Press-Tight unions (2) and ferrules (4), Connect a guard column to an analytical column, Connect a column to a transfer line, Connect two columns in series, Repair a broken column

MXT Low Dead Volume Connector Kit, Fits Column ID: For 0.53 mm ID MXT Columns, Includes: MXT union, 1/32-inch ferrules (2) and nuts (2), for Metal Columns, Connect a guard column/transfer line to an MXT stainless steel column, Stainless steel ferrules and nuts

MXT Low Dead Volume Y Connector Kit, Siltek Fits Column Internal Diameter: For 0.53 mm ID MXT Columns, Includes: MXT union, 1/32-inch ferrules (3) and nuts (3), For Metal Columns, Connect two MXT columns to one inlet or one MXT column to two detectors

Press-Tight Connector. Universal Press-Tight Connector, fused quartz helps eliminate activity for complete inertness along the GC flow path, Universal fit: use with 0.1-0.53 mm ID columns (0.33-0.74 mm OD), ideal for organochlorine pesticides analysis, Repair a broken column.

Y Press-Tight Connector. Universal Y Press-Tight Connectors, Siltek Deactivated, fused quartz eliminate activity for complete inertness along the GC flow path, Universal fit: use with 0.1-0.53 mm ID columns (0.33-0.74 mm OD), ideal for organochlorine pesticides analysis, Split sample flow

Angled Y Press-Tight Connector. Universal Angled Y Press-Tight Connector, Deactivation: Deactivated, fused quartz eliminate activity for complete inertness along the GC flow path, Universal fit: use with 0.1-0.53 mm ID columns (0.33-0.74 mm OD), ideal for organochlorine pesticides analysis

GRAPHPACK 3D/2 Ferrule 0.5 mm. GRAPHPACK 3D/2 Ferrules, Ferrule Internal Diameter: 0.8 mm, Fits Column Internal Diameter: 0.45/0.53 mm, Quickly and reliably makes a leak-tight, low-dead-volume connection, The central component is a metal-jacketed graphite ferrule, Application: GC

Ferrule Replacement 1/32-Inch. Ferrule Replacement for MXT Connectors, Ferrule Internal Diameter: 0.53 mm, Fits Column Internal Diameter: 0.32 mm, Material: Stainless Steel, Fitting Size: 1/32inch, GC Accessories

Universal Y Press-Tight Connectors, Deactivated fused quartz eliminate activity for complete inertness along the GC flow path, Universal fit: use with 0.1-0.53 mm ID columns (0.33-0.74 mm OD), ideal for organochlorine pesticides analysis, Split sample flow

Valco Internal Cross 0.75 mm. Zero-Dead-Volume Valco Internal Cross, Union Bore: 0.75 mm, Material: 300 series stainless steel, Connect four lines, For 1/16inch OD tubing, stainless steel ferrules included, designed for the specific instrumentation with the tight tolerances and premium quality

Valco Internal Cross 0.25 mm. Zero-Dead-Volume Valco Internal Cross, Union Bore: 0.25 mm, Material: 300 series stainless steel, Connect four lines, For 1/16inch OD tubing, stainless steel ferrules included, designed for the specific instrumentation with the tight tolerances and premium quality

Valco Internal Tee 0.75 mm. Zero-Dead-Volume Valco Internal Tee, Union Bore: 0.75 mm, Material: 300 series stainless steel, Connect three lines, For 1/16inch OD tubing, stainless steel ferrules included, designed for the specific instrumentation with the tight tolerances and premium quality

Valco Internal Tee 0.25 mm. Zero-Dead-Volume Valco Internal Tee, Union Bore: 0.25 mm, Material: 300 series stainless steel, Connect three lines, For 1/16inch OD tubing, stainless steel ferrules included, designed for the specific instrumentation with the tight tolerances and premium quality

Angled Y Press-Tight Connector. Universal Angled Y Press-Tight Connector, Siltek Deactivated, fused quartz eliminate activity for complete inertness along the GC flow path, Universal fit: use with 0.1-0.53 mm ID columns (0.33-0.74 mm OD), ideal for organochlorine pesticides analysis

Press-Tight Connector. Universal Press-Tight Connector, Siltek Deactivated, fused quartz helps eliminate activity for complete inertness along the GC flow path, Universal fit: use with 0.1-0.53 mm ID columns (0.33-0.74 mm OD), ideal for organochlorine pesticides analysis, Repair a broken column.

Valco Internal Union 0.75 mm. Zero Dead Volume Valco Internal Union, Union Bore: 0.75 mm, Material: 300-series stainless steel, Ends of tubing seat squarely at bottoms of fitting details, For use with 1/16inch OD tubing, Stainless steel ferrules included, tight tolerances and premium quality

Valco Internal Union 0.15 mm. Zero Dead Volume Valco Internal Union, Union Bore: 0.15 mm, Material: 300-series stainless steel, Ends of tubing seat squarely at bottoms of fitting details, For use with 1/16inch OD tubing, Stainless steel ferrules included, tight tolerances and premium quality

MXT Low Dead Volume Connector for use with Fused Silica Capillary Columns, Union, Siltek For 0.32mm ID Fused Silica Columns, Ideal for connecting a guard column or transfer line to an analytical column, Reusable, Use to oven temperatures of 350 deg C

MXT Low Dead Volume Connector for use with Fused Silica Capillary Columns, Union, Siltek For 0.53mm ID Fused Silica Columns, Ideal for connecting a guard column or transfer line to an analytical column, Reusable, Use to oven temperatures of 350 deg C

Valco Adaptor Ferrule 1/16-Inch. Valco Adaptor Ferrules, Fused silica adaptor ferrules, Material: Valcon Polyimide, Tubing OD: 0.50 Less than or equal to 0.80 mm, unique, graphite-reinforced composite prepared to maximize mechanical stability at temperatures up to 350 degree C, Size: 1/16inch

Valco Adaptor Ferrule 1/16-Inch. Valco Adaptor Ferrules, Fused silica adaptor ferrules, Material: Valcon Polyimide, Tubing OD: 0.40 Less than or equal to 0.50 mm, unique, graphite-reinforced composite prepared to maximize mechanical stability at temperatures up to 350 degree C, Size: 1/16inch

Valco Adaptor Ferrule 1/16-Inch. Valco Adaptor Ferrules, Fused silica adaptor ferrules, Material: Valcon Polyimide, Tubing OD: 0.80 Less than or equal to 0.90 mm, unique, graphite-reinforced composite prepared to maximize mechanical stability at temperatures up to 350 degree C, Size: 1/16inch

Valco Adaptor Ferrule 1/16-Inch. Valco Adaptor Ferrules, Fused silica adaptor ferrules, Material: Valcon Polyimide, Tubing OD: 0.30 Less than or equal to 0.40 mm, unique, graphite-reinforced composite prepared to maximize mechanical stability at temperature up to 350 degree C, Size: 1/16inch

Valco Adaptor Ferrule 1/32-Inch. Valco Adaptor Ferrules, Fused silica adaptor ferrules, Material: Valcon Polyimide, Tubing ID: 0.25 mm; OD: 0.25 Less than or equal to 0.40 mm, unique, graphite-reinforced composite maximize mechanical stability at temperatures up to 350 degree C, Size: 1/32inch

PressFit Connector. Defined PressFit Connector, Material: Borosilicate Glass (Deactivated), Fits Column Internal Diameter: For 0.18/0.25 mm to 0.53 mm ID Columns, Color: Red to Blue (end codes), ID-specific ends for better sealabilit, Repair a broken column, Connect guard column to analytical column

MXT Y -Union Connector Kit, Fits Column ID: For 0.32 mm ID Columns, Siltek, Includes: MXT union, 1/32-inch nuts (3) and one-piece, fused silica adaptors (3), for Connecting Metal and/or Fused Silica GC Columns, Low-dead-volume, leak-tight connection, Reusable

MXT Y -Union Connector Kit, Fits Column ID: For 0.53 mm ID Columns, Siltek, Includes: MXT union, 1/32-inch nuts (3) and one-piece, fused silica adaptors (3), for Connecting Metal and/or Fused Silica GC Columns, Low-dead-volume, leak-tight connection, Reusable

PressFit Connector. Defined PressFit Connector, Material: Borosilicate Glass (Deactivated), Fits Column ID: For 0.18/0.25mm - 0.18/0.25mm ID Columns, Color: Red to Red (end codes), ID-specific ends for better sealabilit, Repair a broken column, Connect guard column to analytical column

Valco Internal Reducing Union 1/16inch. Zero-Dead-Volume Valco Internal Reducing Union, Union Bore: 1/16inch, Connect two sizes of tubing, using zero-dead-volume fittings on each end. For 1/8inch to 1/16inch OD tubing, Stainless steel ferrules included, tight tolerances and premium quality

Valco Internal Reducing Union 0.75 mm. Zero-Dead-Volume Valco Internal Reducing Union, Union Bore: 0.75 mm, Connect two sizes of tubing, using zero-dead-volume fittings on each end. For 1/8inch to 1/16inch OD tubing, Stainless steel ferrules included, tight tolerances and premium quality

Valco Internal Reducing Union 0.25 mm. Zero-Dead-Volume Valco Internal Reducing Union, Union Bore: 0.25 mm, Connect two sizes of tubing, using zero-dead-volume fittings on each end. For 1/8inch to 1/16inch OD tubing, Stainless steel ferrules included, tight tolerances and premium quality

Male Pipe to Valco Internal Adapter 1.0 mm. Male Pipe to Valco Internal Adapter, Union Bore: 1.0 mm, Material: Stainless steel, Size: 1/4inch NPT Male to 1/16inch ZDV, Makes a minimum volume connection from female pipe fitting on a pressure gauge/regulator to a Valco zero-dead-volume fitting

Male Pipe to Valco Internal Adapter 1.0 mm. Male Pipe to Valco Internal Adapter, Union Bore: 1.0 mm, Material: Stainless steel, Size: 1/8inch NPT Male to 1/16inch ZDV, Makes a minimum volume connection from female pipe fitting on a pressure gauge/regulator to a Valco zero-dead-volume fitting

Sapphire Scribe, Cuts fused silica tubing, Produces a clean, square cut, One quick stroke and tap leaves a clean, square end

Tool Kit 54-Piece, notebook-style, Includes: Extension blade, Handle, driver blades, Hemostat, Hexdriver blades, Knife, Nutdriver blades, Penlight, Pliers, Rule,

Oven Thermometer. GC Oven Thermometer, Verify GC oven temperature, Quick measurements via sensor in the measuring tip, Swivel head can turn 180 deg, Wide measuring range: -50 degree C to +350 degree C.

Wrench Set, Includes 4-inch, 6-inch and 8-inch adjustable wrench.

File Needle. MXT Needle File, Multi-purpose files especially useful for cutting Siltek treated stainless steel columns

Magnetic Screwdriver 5-in-1, Magnetic power tip holds bits and screws securely.

Maintenance Kit for Capillary GC Column Cutter. Maintenance Kit for Shortix Capillary GC Column Cutter, Includes: diamond cutting wheel, O-rings and a tool to open the column cutter

Make Life Easier (MLE) Capillary Tool Kit for GCs.

Make Life Easier (MLE) Capillary Tool Kit for GCs.

High-Temperature String, Use to restring capillary columns, attach column connectors to column cages or hold the column in the GC oven. Capable of withstanding temperatures to 400 deg C

Replacement Inserts, for 1/8inch Tubing Dressing Tool.

Make Life Easier (MLE) Capillary Tool Kit for GCs.

Make Life Easier (MLE) Capillary Tool Kit for GCs.

Rethreading Tool, Benefits and Uses: for 1/8 inch compression fitting, Repair worn or damaged threads, Multiple uses (fittings, injectors, detectors, etc.), Built-in guide to prevent cross-threading

Rethreading Tool, Benefits and Uses: for 1/16 inch compression fitting, Repair worn or damaged threads, Multiple uses (fittings, injectors, detectors, etc.), Built-in guide to prevent cross-threading

Replacement Cutting Wheels for Ridgid Tubing Cutter.

Flexible Inspection Light, Inspect inside surfaces of sample cylinders or other chambers, 14 inch reach, 100,000-hour LED life

Inlet Wrench, for 17A, 2010 and 2014 GCs, Designed specifically for removing Shimadzu injection ports, High-quality stainless steel construction

Septum Nut Removal Tool, for 5890/6850/6890/7890 GCs, Easily remove the septum nut without touching the heated nut, Unique, ergonomic handle-easy to grip, Nut remains in tool for quick reattachment

Capillary Column Cap Glass. Capillary Column Cap, Material: Glass, Increase column lifetime-prevent moisture and air from entering the column during storage, color-coded for identifying detector and injector ends, Attach to the column in seconds to form an airtight seal.

SSI Replacement Cutting Wheel for TC-20 Tube Cutting Machine.

Rethreading Tool, Benefits and Uses: for 1/4 inch compression fittings (split/splitless injection ports), Repair worn or damaged threads, Multiple uses (fittings, injectors, detectors, etc.), Built-in guide to prevent cross-threading

Capillary GC Column Cutter. Shortix Capillary GC Column Cutter, Consistently make precise, clean, square cuts with a diamond blade, Built-in magnifier to verify square cut, Use with 0.25 mm ID to 0.53 mm ID tubing (0.78 mm OD maximum)

Ferrule PTFE 3/16in. Ferrule, Material: PTFE, Fitting Size: 3/16in, Ferrule inner Diameter: 3/16in, Upper temperature limit 250 deg C, 100% PTFE, completely inert, One-piece design requires no back ferrule

Alumaseal Ferrule 0.8 mm. Alumaseal Ferrule, Fits Column Inner Diameter: 0.53 mm, Ferrule ID: 0.8 mm, Aluminum construction will not crack or fragment, Stable to 550 deg C, Use with any 1/16in compression-type fitting, Will not stick in fittings, unlike Vespel or graphite ferrule

Capillary Ferrule 1.0 mm. Capillary Ferrule, Material: Vespel, Fits Column ID: 0.75 mm micropacked, Fitting Size: 1/16in Compression-Type Fitting, Ferrule Inner Diameter: 1.0 mm, 100% high-temperature polyimide, Stable to 350 deg C, Durable, leak-tight.

Capillary Ferrule 0.8 mm. Capillary Ferrule, Material: Vespel, Fits Column ID: 0.45/0.53 mm, Fitting Size: 1/16in Compression-Type Fitting, Ferrule Inner Diameter: 0.8 mm, 100% high-temperature polyimide, Stable to 350 deg C, Durable, leak-tight.

Capillary Ferrule 0.5 mm. Capillary Ferrule, Material: Vespel, Fits Column ID: 0.32 mm, Fitting Size: 1/16in Compression-Type Fitting, Ferrule Inner Diameter: 0.5 mm, 100% high-temperature polyimide, Stable to 350 deg C, Durable, leak-tight.

Capillary Ferrule 0.4 mm. Capillary Ferrule, Material: Vespel, Fits Column ID: 0.10/0.15/0.18/0.25/0.28 mm Fused Silica Column, Fitting Size: 1/16in Compression-Type Fitting, Ferrule Inner Diameter: 0.4 mm, 100% high-temperature polyimide, Stable to 350 deg C, Durable, leak-tight.

Ferrule for Micropacked Column 1.00 mm. Ferrule for Micropacked Column, Compact, Fits Column ID: 1.00 mm, Material: Graphite, Ferrule ID: 1.6 mm, for Agilent 5890/6890/6850/7890 Gas chromatography,

Ferrule 1mm. Ferrule for Micropacked Column, Fits Column ID: 1.00 mm, Material: Graphite, Fitting Size: 1/16in Compression-Type Fitting, Preconditioned to eliminate outgassing, High-purity, high-density graphite, Smoother surface and cleaner edge, conventional graphite ferrule, Stable to 450 deg C

Ferrule for Micropacked Column 1.0 mm. Ferrule for Micropacked Column, Compact, Ferrule Inner Diameter: 1.0 mm, Fits Column Inner Diameter: 0.75 mm, Material: Graphite, for Agilent 5890/6890/6850/7890 Gas chromatography

Ferrule 1.0 mm. Ferrule, Fits Column ID: 0.75 mm, Material: Graphite, Fitting Size: 1/16in, Ferrule ID: 1 mm, Compression-Type Fitting, Preconditioned to eliminate outgassing, High-purity, high-density graphite, Smoother surface and cleaner edges, conventional graphite ferrules, Stable to 450 deg C

Ferrule 0.5 mm. Ferrule, Fits Column ID: 0.32 mm, Material: Graphite, Fitting Size: 1/16in, Ferrule ID: 0.5 mm, Compression-Type Fitting, Preconditioned to eliminate outgassing, High-purity, high-density graphite, Smoother surface, cleaner edges, conventional graphite ferrules, Stable to 450 deg C

Liner Seal, for CIS4 and PTV instrument, Maximum Temperature: 450 degree C.

Ferrule, Material: Vespel/Graphite, Fitting Size: 1/32in, Ferrule Inner Diameter: 0.4 mm.

Encapsulated Ferrule 0.8 mm. Encapsulated Ferrule, Fits Column ID: 0.53 mm, Material: Graphite, Ferrule ID: 0.8 mm, for 1/16-Inch Compression Fitting, Reusable-will not deform and stick in fitting, Less torque needed to seal ferrule, unique blend of graphite minimizes fragmentation and out-gassing

Encapsulated Ferrule 0.5 mm. Encapsulated Ferrule, Fits Column ID: 0.32 mm, Material: Graphite, Ferrule ID: 0.5 mm, for 1/16-Inch Compression Fitting, Reusable-will not deform and stick in fitting, Less torque needed to seal ferrule, unique blend of graphite minimizes fragmentation and out-gassing

Reducing Ferrule 0.5 mm. Reducing Ferrule, Fits Column ID: 0.32 mm, Ferrule ID: 0.5 mm, Material: Graphite, Fitting Size: 1/4in, Preconditioned to eliminate outgassing, High-purity, high-density graphite, Smoother surface and cleaner edges than conventional graphite ferrule, Stable to 450 deg C

O-Ring Graphite. O-Ring, Material: Graphite, Maximum Temperature: 450 deg C, Fits 4 mm OD liner, for PerkinElmer Auto SYS XL or Clarus gas chromatography With PSS Injector

Graphite Sealing Ring, for Thermo Scientific TRACE, 8000, 8000 TOP and Focus SSL instrument, fits 8 mm Outer Diameter liners, Maximum Temperature: 450 degree C

Ferrule 1/16in. Ferrule, Adaptor, Material: Virgin Polyimide, graphite-reinforced composite, Tubing OD: 0.40 less than or equal to 0.50mm, to maximize mechanical stability at 350 deg C temperature, with tight tolerance, for EZ No-Vent GC Column-MS Connectors, determined by fused silica tubing OD

Capillary Ferrule 0.6 mm. Capillary Ferrule, Material: VG2, 60% Vespel/40% Graphite, Fits Column ID: 0.28 mm, ferrule ID: 0.6 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Standard Ferrule 1/16in. Standard Ferrule, Material: VG2, 60% Vespel/40% Graphite, Fitting Size: 1/4in, Ferrule ID: reduce to 1/16in, Seal with minimal torque, reusable, and for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines, also for 1/16, 1/8 Fittings

Graphite Ferrule 0.8 mm. Graphite Ferrule, Fits Column ID: 0.45-0.53 mm, Material: Graphite, Fitting Size: 1/16in, Ferrule ID: 0.8 mm, High-purity, high-density graphite, Stable to 450 deg C, M4 Fitting for Fisons 8000 GC and Trace 2000, with Smooth surface and clean edges, for Vu2 Union Connector

Graphite Ferrule 0.5 mm. Graphite Ferrule, Fits Column ID: 0.32 mm, Material: Graphite, Fitting Size: 1/16in, Ferrule ID: 0.5 mm, High-purity, high-density graphite, Stable to 450 deg C, M4 Fitting for Fisons 8000 GC and Trace 2000, with Smooth surface and clean edges, for Vu2 Union Connector

Ferrule Replacement Polyimide. Ferrule Replacement, for connecting transfer line to EZ No-Vent connector, Material: Polyimide, ID: 0.4 mm

Rxi Guard Column 5m. Rxi Guard Column, fused silica, nonpolar phase, Crossbond dimethyl polysiloxane, Extend column lifetime, Excellent inertness-obtain lower detection limits for active compounds, Sharper chromatographic peaks, Length: 5m, Nominal ID: 0.25mm, Nominal OD: 0.37 +/- 0.04mm

Rtx 1 Column30m. Rtx 1 Column, fused silica, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature Range: -60 -340 deg C, Equivalent to USP G1, G2, G38 phases, for solvent impurities, PCB congeners, simulated distillation, Length: 30mInternal Diameter: 0.32mm, Df: 5.00um

Rxi XLB Column 30m. Rxi XLB Column, fused silica, nonpolar phase, Crossbond dimethyl polysiloxane, low-polarity proprietary phase, Temperature range: 30 Deg C to 360 Deg C, for many GC-MS applications, including pesticides, PCB congeners, Length: 30m, Internal Diameter: 0.25mm, df: 0.25um

Stx-CLPesticides Column, fused silica with Siltek deactivation, proprietary Crossbond phases, Application-specific Column for organochlorine pesticides and herbicides, Temperature range: -60 to 330 deg C, Length: 30 m, Internal Diameter: 0.32mm, df: 0.50um

Rtx 220MS Column 30m. Rtx 220MS Low-Bleed GC-MS Column, fused silica, midpolarity phase, Crossbond trifluoropropylmethyl polysiloxane, Temperature range: -20 Deg C to 340 Deg C, Equivalent to USP G6 phase, for solvents, Freon fluorocarbons, Length: 30m, Internal Diameter: 0.32mm, df: 0.25um

Stx CLPesticides 2 Column 30m. Stx CLPesticides2 Column, fused silica with Siltek deactivation, proprietary Crossbond phases, Application-specific Column for organochlorine pesticides and herbicides, Temperature range: -60 to 330 deg C, Length: 30 m, Internal Diameter: 0.32mm, df: 0.25um

Rtx Dioxin2 Column 60m. Rtx Dioxin2 Column, fused silica, proprietary Crossbond phase, Temperature Range: 20 to 340 deg C, Unique selectivity for toxic dioxin and furan congeners allows use as a confirmation GC column, Length: 60m, Internal Diameter: 0.25mm, df: 0.25um

Intermediate-Polarity Deactivated Guard/Retention Gap Column/Transfer Lines, fused silica, Tested with a comprehensive test mix to ensure high inertness, Useful for a wide range of applications, Nominal ID: 0.10mm, Nominal OD: 0.363 +/- 0.012mm, Length: 5 m

MXT 1 Column 6m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 6m, Internal Diameter: 0.28mm, df: 0.1um

MXT Guard/Retention Gap Column. Intermediate-Polarity Deactivated MXT Guard/Retention Gap Column/Transfer Lines, passivated stainless steel, Temperature range: 325 deg C, Useful for a wide range of applications, Nominal ID: 0.53mm, Nominal OD: 0.56 +/- 0.025mm, Length: 10 m

MXT Guard/Retention Gap Column. Intermediate-Polarity Deactivated MXT Guard/Retention Gap Column/Transfer Lines, passivated stainless steel, Temperature range: 325 deg C, Useful for a wide range of applications, Nominal ID: 0.28mm, Nominal OD: 0.56 +/- 0.025mm, Length: 10 m

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.32mm, df: 4.00um

MXT 5 Column 20m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 20m, Internal Diameter: 0.18mm, df: 0.40um

MXT 5 Column 10m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 10m, Internal Diameter: 0.18mm, df: 0.40um

MXT 5 Column 40m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 40m, Internal Diameter: 0.18mm, df: 0.20um

MXT 5 Column 20m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 20m, Internal Diameter: 0.18mm, df: 0.20um

MXT 5 Column 10m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 10m, Internal Diameter: 0.18mm, df: 0.20um

MXT 1 Column 20m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 20m, Internal Diameter: 0.18mm, df: 0.40um

MXT 1 Column 20m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 20m, Internal Diameter: 0.18mm, df: 0.20um

MXT 1 Column 10m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 10m, Internal Diameter: 0.18mm, df: 0.20um

MXT 5 Column 60m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.53mm, df: 3.00um

MXT 5 Column 30m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.53mm, df: 3.00um

MXT 5 Column 30m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.28mm, df: 3.00um

MXT 5 Column 60m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.53mm, df: 5.00um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.53mm, df: 3.00um

MXT 5 Column 30m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.53mm, df: 5.00um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.53mm, df: 5.00um

MXT 5 Column 30m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.53mm, df: 1.50um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.53mm, df: 1.50um

MXT 5 Column 60m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.53mm, df: 1.00um

MXT 5 Column 60m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.28mm, df: 1.00um

MXT 5 Column 30m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.53mm, df: 1.00um

MXT 5 Column 30m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.28mm, df: 1.00um

MXT 5 Column 30m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.25mm, df: 1.00um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.53mm, df: 1.00um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.28mm, df: 1.00um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.25mm, df: 1.00um

MXT 5 Column 60m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.53mm, df: 0.50um

MXT 5 Column 30m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.25mm, df: 0.50um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.53mm, df: 0.50um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.25mm, df: 0.50um

MXT 5 Column 60m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.53mm, df: 0.25um

MXT 5 Column 60m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.28mm, df: 0.25um

MXT 5 Column 60m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.25mm, df: 0.25um

MXT 5 Column 30m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.53mm, df: 0.25um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.53mm, df: 0.25um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.28mm, df: 0.25um

MXT 5 Column 15m. MXT 5 Column, Siltek treated stainless steel, low-polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature Range: -60-360 deg C, Equivalent to USP G27, G36 phases, General-purpose, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.25mm, df: 0.25um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.53mm, df: 7.00um

MXT 1 Column 15m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 15m, Internal Diameter: 0.53mm, df: 7.00um

MXT 1 Column 60m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 60m, Internal Diameter: 0.53mm, df: 3.00um

MXT 1 Column 60m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 60m, Internal Diameter: 0.28mm, df: 3.00um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.53mm, df: 3.00um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.28mm, df: 3.00um

MXT 1 Column 15m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 15m, Internal Diameter: 0.53mm, df: 3.00um

MXT 1 Column 15m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 15m, Internal Diameter: 0.28mm, df: 3.00um

MXT 1 Column 15m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 15m, Internal Diameter: 0.53mm, df: 5.00um

MXT 1 Column 60m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 60m, Internal Diameter: 0.53mm, df: 1.50um

MXT 1 Column 15m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 15m, Internal Diameter: 0.53mm, df: 1.50um

MXT 1 Column 60m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 60m, Internal Diameter: 0.28mm, df: 1.00um

MXT 1 Column 60m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 60m, Internal Diameter: 0.25mm, df: 1.00um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.53mm, df: 1.00um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.28mm, df: 1.00um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.25mm, df: 1.00um

MXT 1 Column 15m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 15m, Internal Diameter: 0.28mm, df: 1.00um

MXT 1 Column 60m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 60m, Internal Diameter: 0.53mm, df: 0.50um

MXT 1 Column 60m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 60m, Internal Diameter: 0.25mm, df: 0.50um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.53mm, df: 0.50um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.25mm, df: 0.50um

MXT 1 Column 60m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 60m, Internal Diameter: 0.53mm, df: 0.25um

MXT 1 Column 60m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 60m, Internal Diameter: 0.25mm, df: 0.25um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.53mm, df: 0.25um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.25mm, df: 0.25um

MXT 1 Column 15m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 15m, Internal Diameter: 0.25mm, df: 0.25um

MXT 1 Column 30m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 30m, Internal Diameter: 0.25mm, df: 0.10um

MXT 1 Column 15m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 15m, Internal Diameter: 0.28mm, df: 0.10um

MXT 1 Column 15m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 15m, Internal Diameter: 0.25mm, df: 0.10um

MXT U-BOND Column 15m. MXT U-BOND Column, 100% Bonded, Unbreakable, Same inertness and passivity as fused silica Column, Expanded line, resisting abrasion, scratches, can be repeatedly programmed to high temperatures, Length: 15m, Internal Diameter: 0.53mm, df: 20um

MXT Q-BOND Column 30m. MXT Q-BOND Column, Siltek treated stainless steel PLOT, Rugged material withstands rough handling and shock, Designed for robust performance in process GCs, Temperature range: 280-300 deg CConfig: 7in 11-pin cage, Length: 30m, Internal Diameter: 0.53mm, df: 20um

MXT 65 Column 30m. MXT 65 Column, Siltek treated stainless steel, mid to high polarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature range: 50 deg - 300 deg C, Equivalent to USP G17 phase, General-purpose for phenols, Length: 30m, Internal Diameter: 0.25mm, df: 0.25um

MXT 50 Column 20m. MXT 50 Column, Siltek treated stainless steel, midpolarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature range: 0 deg C to 300 deg C, Equivalent to USP G3 phase, 4.5in standard coil diameter, Length: 20m, Internal Diameter: 0.18mm, df: 0.20um

MXT 50 Column 30m. MXT 50 Column, Siltek treated stainless steel, midpolarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature range: 0 deg C to 300 deg C, Equivalent to USP G3 phase, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.53mm, df: 1.00um

MXT 50 Column 15m. MXT 50 Column, Siltek treated stainless steel, midpolarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature range: 0 deg C to 300 deg C, Equivalent to USP G3 phase, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.53mm, df: 1.00um

MXT 35 Column 15m. MXT 35 Column, Siltek treated stainless steel, midpolarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature range: 0 deg C to 340 deg C, Equivalent to USP G42 phase, for organochlorine pesticides, PCB congeners, Length: 15m, Internal Diameter: 0.53mm, df: 3.00um

MXT 35 Column 30m. MXT 35 Column, Siltek treated stainless steel, midpolarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature range: 0 deg C to 340 deg C, Equivalent to USP G42 phase, for organochlorine pesticides, PCB congeners, Length: 30m, Internal Diameter: 0.25mm, df: 0.50um

MXT 20 Column 30m. MXT 20 Column, Siltek treated stainless steel, low to midpolarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature range: -20 deg C-340 deg C, Equivalent to USP G28, G32 phases, for volatile compound, Length: 30m, Internal Diameter: 0.53mm, df: 1.00um

MXT 20 Column 15m. MXT 20 Column, Siltek treated stainless steel, low to midpolarity phase, Crossbond diphenyl dimethyl polysiloxane, Temperature range: -20 deg C-340 deg C, Equivalent to USP G28, G32 phases, for volatile compound, Length: 15m, Internal Diameter: 0.25mm, df: 0.25um

MXT 1 Column105m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 105m, Internal Diameter: 0.25mm, df: 1.00um

MXT 1 Column105m. MXT 1 Column, Siltek treated stainless steel, nonpolar phase, Crossbond dimethyl polysiloxane, Temperature range: -60-430 Deg C, Equivalent to USP G1, G2, G38 phases, 4.5in standard coil diameter, for solvent impurities, Length: 105m, Internal Diameter: 0.25mm, df: 0.25um

MXT 200 Column 60m. MXT 200 Column, Siltek treated stainless steel, midpolarity phase, Crossbond trifluoropropylmethyl polysiloxane, Temperature range: -20 deg C to 400 deg C, Equivalent to USP G6 phase, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.53mm, df: 3.00um

MXT 200 Column 30m. MXT 200 Column, Siltek treated stainless steel, midpolarity phase, Crossbond trifluoropropylmethyl polysiloxane, Temperature range: -20 deg C to 400 deg C, Equivalent to USP G6 phase, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.53mm, df: 3.00um

MXT 200 Column 15m. MXT 200 Column, Siltek treated stainless steel, midpolarity phase, Crossbond trifluoropropylmethyl polysiloxane, Temperature range: -20 deg C to 400 deg C, Equivalent to USP G6 phase, 4.5in standard coil diameter, Length: 15m, Internal Diameter: 0.53mm, df: 3.00um

MXT 200 Column 60m. MXT 200 Column, Siltek treated stainless steel, midpolarity phase, Crossbond trifluoropropylmethyl polysiloxane, Temperature range: -20 deg C to 400 deg C, Equivalent to USP G6 phase, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.53mm, df: 1.50um

MXT 200 Column 30m. MXT 200 Column, Siltek treated stainless steel, midpolarity phase, Crossbond trifluoropropylmethyl polysiloxane, Temperature range: -20 deg C to 400 deg C, Equivalent to USP G6 phase, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.53mm, df: 1.50um

MXT 200 Column 60m. MXT 200 Column, Siltek treated stainless steel, midpolarity phase, Crossbond trifluoropropylmethyl polysiloxane, Temperature range: -20 deg C to 400 deg C, Equivalent to USP G6 phase, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.53mm, df: 1.00um

MXT 200 Column 30m. MXT 200 Column, Siltek treated stainless steel, midpolarity phase, Crossbond trifluoropropylmethyl polysiloxane, Temperature range: -20 deg C to 400 deg C, Equivalent to USP G6 phase, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.25mm, df: 1.00um

MXT 200 Column 30m. MXT 200 Column, Siltek treated stainless steel, midpolarity phase, Crossbond trifluoropropylmethyl polysiloxane, Temperature range: -20 deg C to 400 deg C, Equivalent to USP G6 phase, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.25mm, df: 0.50um

MXT 624 Column 10m. MXT 624 Column, Siltek treated stainless steel, low to midpolarity phase, Crossbond 6% cyanopropylphenyl/94% dimethyl polysiloxane, Temperature range: -20 deg C to 280 deg C, Equivalent to USP G43 phase, Length: 10m, Internal Diameter: 0.18mm, df: 1.00um

MXT 1701 Column 20m. MXT 1701 Column, Silcosteel treated stainless steel, Crossbond 14% cyanopropylphenyl/86% dimethyl polysiloxan, Temperature range: -20 deg C to 280 deg C, Equivalent to USP G46 phase, Length: 20m, Internal Diameter: 0.18mm, df: 0.40um

MXT 1701 Column 10m. MXT 1701 Column, Silcosteel treated stainless steel, Crossbond 14% cyanopropylphenyl/86% dimethyl polysiloxan, Temperature range: -20 deg C to 280 deg C, Equivalent to USP G46 phase, Length: 10m, Internal Diameter: 0.18mm, df: 0.40um

MXT WAX Column 10m. MXT WAX Column, Siltek treated stainless steel, polar phase, Crossbond Carbowax polyethylene glycol, Equivalent to USP G14, G15, G16, G20, and G39 phases, U.S. EPA Method 603, 4.5in standard coil diameter, Length: 10m, Internal Diameter: 0.18mm, df: 0.40um

MXT WAX Column 10m. MXT WAX Column, Siltek treated stainless steel, polar phase, Crossbond Carbowax polyethylene glycol, Equivalent to USP G14, G15, G16, G20, and G39 phases, U.S. EPA Method 603, 4.5in standard coil diameter, Length: 10m, Internal Diameter: 0.18mm, df: 0.20um

MXT 624 Column 60m. MXT 624 Column, Siltek treated stainless steel, low- to midpolarity phase, Temperature range: -20 deg C to 280 deg C, Equivalent to USP G43 phase, 4.5in standard coil diameter, U.S. EPA methods for organic pollutants, Length: 60m, Internal Diameter: 60m, df: 3.00um

MXT 624 Column 60m. MXT 624 Column, Siltek treated stainless steel, low- to midpolarity phase, Temperature range: -20 deg C to 280 deg C, Equivalent to USP G43 phase, 4.5in standard coil diameter, U.S. EPA methods for organic pollutants, Length: 60m, Internal Diameter: 60m, df: 1.40um

MXT 624 Column 30m. MXT 624 Column, Siltek treated stainless steel, low- to midpolarity phase, Temperature range: -20 deg C to 280 deg C, Equivalent to USP G43 phase, 4.5in standard coil diameter, U.S. EPA methods for organic pollutants, Length: 30m, Internal Diameter: 30m, df: 1.40um

MXT WAX Column 60m. MXT WAX Column, Siltek treated stainless steel, polar phase, Crossbond Carbowax polyethylene glycol, Equivalent to USP G14, G15, G16, G20, and G39 phases, U.S. EPA Method 603, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.53mm, df: 1.50um

MXT WAX Column 30m. MXT WAX Column, Siltek treated stainless steel, polar phase, Crossbond Carbowax polyethylene glycol, Equivalent to USP G14, G15, G16, G20, and G39 phases, U.S. EPA Method 603, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.53mm, df: 1.50um

MXT WAX Column 60m. MXT WAX Column, Siltek treated stainless steel, polar phase, Crossbond Carbowax polyethylene glycol, Equivalent to USP G14, G15, G16, G20, and G39 phases, U.S. EPA Method 603, 4.5in standard coil diameter, Length: 60m, Internal Diameter: 0.28mm, df: 1.00um

MXT WAX Column 30m. MXT WAX Column, Siltek treated stainless steel, polar phase, Crossbond Carbowax polyethylene glycol, Equivalent to USP G14, G15, G16, G20, and G39 phases, U.S. EPA Method 603, 4.5in standard coil diameter, Length: 30m, Internal Diameter: 0.28mm, df: 1.00um

MXT WAX Column 1um. MXT WAX Column (Siltek treated stainless steel), polar phase; Crossbond polyethylene glycol-provides oxidation resistance, Length: 15m, ID: 0.53mm, df: 1um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.5um. MXT WAX Column (Siltek treated stainless steel), polar phase; polyethylene glycol-provides oxidation resistance, Length: 60 m, ID: 0.28mm, df: 0.5um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.5um. MXT WAX Column(Siltek treated stainless steel), polar phase; Crossbond polyethylene glycol-provides oxidation resistance, Length: 30m, ID: 0.53mm, df: 0.5um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.5um. MXT WAX Column(Siltek treated stainless steel), polar phase; Crossbond polyethylene glycol-provides oxidation resistance, Length: 30m, ID: 0.28mm, df: 0.5um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.5um. MXT WAX Column(Siltek treated stainless steel), polar phase; Crossbond polyethylene glycol-provides oxidation resistance, Length: 30m, ID: 0.25mm, df: 0.5um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.5um. MXT WAX Column(Siltek treated stainless steel), polar phase; Crossbond polyethylene glycol-provides oxidation resistance, Length: 15m, ID: 0.53mm, df: 0.5um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.25um. MXT WAX Column(Siltek treated stainless steel), polar phase; Crossbond polyethylene glycol-provides oxidation resistance, Length: 60 m, ID: 0.25mm, df: 0.25um, Temperature: 40 to 240 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.25um. MXT WAX Column (Siltek treated stainless steel), polar phase; polyethylene glycol-provides oxidation resistance, Length: 30m, ID: 0.53mm, df: 0.25um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.25um. MXT WAX Column (Siltek treated stainless steel), polar phase; polyethylene glycol-provides oxidation resistance, Length: 30m, ID: 0.28mm, df: 0.25um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.25um. MXT WAX Column (Siltek treated stainless steel), polar phase; polyethylene glycol-provides oxidation resistance, Length: 30m, ID: 0.25mm, df: 0.25um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.25um. MXT WAX Column (Siltek treated stainless steel), polar phase; polyethylene glycol-provides oxidation resistance, Length: 15m, ID: 0.53mm, df: 0.25um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.25um. MXT WAX Column (Siltek treated stainless steel), polar phase; polyethylene glycol-provides oxidation resistance, Length: 15m, ID: 0.28mm, df: 0.25um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 0.25um. MXT WAX Column (Siltek treated stainless steel), polar phase; polyethylene glycol-provides oxidation resistance, Length: 15m, ID: 0.25mm, df: 0.25um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT BAC1 Column 3um. MXT BAC1 Column (Silcosteel treated stainless steel), proprietary Crossbond phase, Capillary column, Length: 30m, Internal Diameter: 0.53mm, df: 3um, Temperature: -20 to 240 deg C, Application: for blood alcohol analysis, abused inhalant anesthetics, Y-hydroxybutyrate

MXT 65TG Column 0.10um. MXT 65TG Column (Siltek treated stainless steel), high-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Length: 30m, ID: 0.25mm, df: 0.10um, Temperature: 20 to 370 deg C, Standard coil diameter: 4.5inch, Application: specially tested for triglycerides

MXT 65TG Column 0.10um. MXT 65TG Column (Siltek treated stainless steel), high-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Length: 15m, ID: 0.25mm, df: 0.10um, Temperature: 20 to 370 deg C, Standard coil diameter: 4.5inch, Application: specially tested for triglycerides

MXT 1301 Column 3um. MXT 1301 Column (Siltek treated stainless steel), low- to midpolarity phase, Length: 60 m, ID: 0.53mm, df: 3um, Temperature: -20 to 250 deg C, Equivalent to USP G43 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, volatile organic compounds

MXT 1301 Column 3um. MXT 1301 Column (Siltek treated stainless steel), low- to midpolarity phase, Length: 30m, ID: 0.53mm, df: 3um, Temperature: -20 to 250 deg C, Equivalent to USP G43 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, volatile organic compounds

MXT 1301 Column 3um. MXT 1301 Column (Siltek treated stainless steel), low- to midpolarity phase, Length: 15m, ID: 0.53mm, df: 3um, Temperature: -20 to 250 deg C, Equivalent to USP G43 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, volatile organic compounds

MXT 1301 Column 1um. MXT 1301 Column (Siltek treated stainless steel), low- to midpolarity phase, Length: 30m, ID: 0.28mm, df: 1um, Temperature: -20 to 250 deg C, Equivalent to USP G43 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, volatile organic compounds

MXT 1701 Column 3um. MXT 1701 Column (Siltek treated stainless steel), midpolarity Crossbond phase, Length: 60 m, ID: 0.53mm, df: 3um, Temperature: -20 to 250 deg C, Equivalent to USP G46 phase, Standard coil diameter: 4.5inch, for Alcohols, oxygenates, PCB congeners and pesticides

MXT 1701 Column 3um. MXT 1701 Column (Siltek treated stainless steel), midpolarity Crossbond phase, Length: 30m, ID: 0.53mm, df: 3um, Temperature: -20 to 250 deg C, Equivalent to USP G46 phase, Standard coil diameter: 4.5inch, for Alcohols, oxygenates, PCB congeners and pesticides

MXT 1701 Column 3um. MXT 1701 Column (Siltek treated stainless steel), midpolarity Crossbond phase, Length: 15m, ID: 0.53mm, df: 3um, Temperature: -20 to 250 deg C, Equivalent to USP G46 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, PCB congeners and pesticides

MXT 1701 Column 1um. MXT 1701 Column (Siltek treated stainless steel), midpolarity Crossbond phase, Length: 60 m, ID: 0.53mm, df: 1um, Temperature: -20 to 250 deg C, Equivalent to USP G46 phase, Standard coil diameter: 4.5inch, for Alcohols, oxygenates, PCB congeners and pesticides

MXT 1701 Column 1um. MXT 1701 Column (Siltek treated stainless steel), midpolarity Crossbond phase, Length: 30m, ID: 0.53mm, df: 1um, Temperature: -20 to 250 deg C, Equivalent to USP G46 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, PCB congeners and pesticides

MXT 1701 Column 1um. MXT 1701 Column (Siltek treated stainless steel), midpolarity Crossbond phase, Length: 30m, ID: 0.28mm, df: 1um, Temperature: -20 to 250 deg C, Equivalent to USP G46 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, PCB congeners and pesticides

MXT 1701 Column 1um. MXT 1701 Column (Siltek treated stainless steel), midpolarity Crossbond phase, Length: 30m, ID: 0.25mm, df: 1um, Temperature: -20 to 250 deg C, Equivalent to USP G46 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, PCB congeners and pesticides

MXT 1701 Column 1um. MXT 1701 Column (Siltek treated stainless steel), midpolarity Crossbond phase, Length: 15m, ID: 0.53mm, df: 1um, Temperature: -20 to 250 deg C, Equivalent to USP G46 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, PCB congeners and pesticides

Rt S-BOND Column 20um. Rt S-BOND Column (fused silica PLOT), porous divinylbenzene homopolymer, Midpolarity porous polyme, incorporating high 4-vinylpyridine, Length: 30m, ID: 0.53mm, df: 20um, Temperature: Stable to 250 deg C, Application: Use for the analysis of nonpolar and polar compounds

MXT Volatiles Column 2um. MXT Volatiles Column (Siltek treated stainless steel), proprietary Crossbond diphenyl/dimethyl polysiloxane phase, Length: 60 m, ID: 0.53mm, df: 2um, Temperature: -20 deg C to 320 deg C, Standard coil diameter: 4.5inch, Application: for volatile organic pollutants

MXT Volatiles Column 1.25um. MXT Volatiles Column(Siltek treated stainless steel), proprietary Crossbond diphenyl/dimethyl polysiloxane phase, Length: 60 m, ID: 0.28mm, df: 1.25um, Temperature: -20 deg C to 320 deg C, Standard coil diameter: 4.5inch, Application: for volatile organic pollutants

MXT Volatiles Column 2um. MXT Volatiles Column (Siltek treated stainless steel), proprietary Crossbond diphenyl/dimethyl polysiloxane phase, Length: 30m, ID: 0.53mm, df: 2um, Temperature: -20 deg C to 320 deg C, Standard coil diameter: 4.5inch, Application: for volatile organic pollutants

MXT Volatiles Column 1.25um. MXT Volatiles Column(Siltek treated stainless steel), proprietary Crossbond diphenyl/dimethyl polysiloxane phase, Length: 30m, ID: 0.28mm, df: 1.25um, Temperature: -20 deg C to 320 deg C, Standard coil diameter: 4.5inch, Application: for volatile organic pollutants

MXT Volatiles Column 3um. MXT Volatiles Column (Siltek treated stainless steel), proprietary Crossbond diphenyl/dimethyl polysiloxane phase, Length: 60 m, ID: 0.53mm, df: 3um, Temperature: -20 deg C to 320 deg C, Standard coil diameter: 4.5inch, Application: for volatile organic pollutants

Rt Alumina BOND/MAPD Column 5um. Rt Alumina BOND/MAPD Column (fused silica PLOT), Length: 30m, ID: 0.32mm, df: 5um, Temperature: Stable to 250 deg C, Application: for the analysis of petrochemicals and ethylene, propylene, butylenes and butadiene, ideal for process-type applications

Rt Alumina BOND/MAPD Column 4um. Rt Alumina BOND/MAPD Column (fused silica PLOT), Length: 30m, ID: 0.25mm, df: 4um, Temperature: Stable to 250 deg C, Application: for the analysis of petrochemicals and ethylene, propylene, butylenes and butadiene, ideal for process-type applications

MXT 1HT Sim Dist Column 0.88um. MXT 1HT Sim Dist Column (Siltek treated stainless steel), nonpolar phase; 100% dimethyl polysiloxane phase, Length: 5m, ID: 0.53mm, df: 0.88um, Temperature: -60 to 400 deg C, Coil diameter: 7 inch, Config: 11-pin cage, Meets all ASTM D2887, D7500 specifications

MXT Msieve 5A Column 50um. MXT Msieve 5A Column (Siltek treated stainless steel PLOT), Length: 30m, ID: 0.53mm, df: 50um, Config: 7 inch 11-pin cage,Temperature: 200 deg C, Equivalent to USP G43 phase, Rugged material, Designed for robust performance in process GCs and field instrument

MXT 5 Column 0.25um. MXT 5 Column (Siltek treated stainless steel), low-polarity phase, diphenyl dimethyl polysiloxane, Length: 30m, ID: 0.25mm, df: 0.25um, Temperature: -60 to 285/360 deg C, Equivalent to USP G27, G36 phases, Standard coil diameter: 4.5inch, for solvent impurities, pesticides

MXT 1 Column 0.5um. MXT 1 Column(Siltek treated stainless steel), nonpolar phase; Crossbond dimethyl polysiloxane, Length: 30m, ID: 0.28mm, df: 0.5um, Temperature: -60 to 285/360 deg C, Equivalent to USP G1, G2, G38 phases, Standard coil diameter: 4.5inch, for solvent impurities, PCB congeners

MXT 1 Column 0.5um. MXT 1 Column(Siltek treated stainless steel), nonpolar phase; Crossbond dimethyl polysiloxane, Length: 15m, ID: 0.25mm, df: 0.5um, Temperature: -60 to 285/360 deg C, Equivalent to USP G1, G2, G38 phases, Standard coil diameter: 4.5inch, for solvent impurities, PCB congeners

MXT 1 Column 3um. MXT 1 Column (Siltek treated stainless steel), nonpolar phase; Crossbond dimethyl polysiloxane, Length: 105m, ID: 0.53mm, df: 3um, Temperature: -60 to 285/360 deg C, Equivalent to USP G1, G2, G38 phases, Standard coil diameter: 4.5inch, for solvent impurities, PCB congeners

MXT 200 Column 1um. MXT 200 Column (Siltek treated stainless steel), midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, Length: 30m, ID: 0.53mm, df: 1um, Temperature: -20 to 290/360 deg C, Equivalent to USP G6 phase, Standard coil diameter: 4.5inch, for solvents, fluorocarbons

MXT WAX Column 2um. MXT WAX Column (Siltek treated stainless steel), polar phase; Crossbond polyethylene glycol-provides oxidation resistance, Length: 15m, ID: 0.53mm, df: 2um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 1.5um. MXT WAX Column(Siltek treated stainless steel), polar phase; Crossbond polyethylene glycol-provides oxidation resistance, Length: 15m, ID: 0.53mm, df: 1.5um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 1um. MXT WAX Column (Siltek treated stainless steel), polar phase; Crossbond polyethylene glycol-provides oxidation resistance, Length: 60 m, ID: 0.53mm, df: 1um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT WAX Column 1um. MXT WAX Column (Siltek treated stainless steel), polar phase; Crossbond polyethylene glycol-provides oxidation resistance, Length: 15m, ID: 0.28mm, df: 1um, Temperature: 40 to 240/250 deg C, Equivalent to USP G14, G15, G16, G20, G39 phases, Standard coil diameter: 4.5inch

MXT 1301 Column 1.50 um. MXT 1301 Column (Siltek treated stainless steel), low- to midpolarity phase, Length: 60 m, ID: 0.53mm, df: 1.50 um, Temperature: -20 to 250 deg C, Equivalent to USP G43 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, volatile organic compounds

MXT 1301 Column 1.50 um. MXT 1301 Column (Siltek treated stainless steel), low- to midpolarity phase, Length: 15m, ID: 0.53mm, df: 1.50 um, Temperature: -20 to 250 deg C, Equivalent to USP G43 phase, Standard coil diameter: 4.5inch, Application: Alcohols, oxygenates, volatile organic compounds

MXT 1701 Column 1.50 um. MXT 1701 Column (Siltek treated stainless steel), midpolarity Crossbond phase, Length: 30m, ID: 0.53mm, df: 1.50 um, Temperature: -20 to 250 deg C, Equivalent to USP G46 phase, Standard coil diameter: 4.5inch, for Alcohols, oxygenates, PCB congeners and pesticides

MXT 502.2 Column 3um. MXT 502.2 Column (Siltek treated stainless steel), proprietary Crossbond diphenyl/dimethyl polysiloxane phase, Length: 30m, ID: 0.53mm, df: 3um, Temperature: -20 to 320 deg C, Standard coil diameter: 4.5inch, for separation of trihalomethanes, monitoring storage tanks

MXT-1 Columns 60M. MXT-1 Columns (Siltek-treated stainless steel) nonpolar phase; Crossbond dimethyl polysiloxane, Length: 60M, ID: 0.53mm, Film Thickness: 5.00um, General-purpose columns for solvent impurities, PCB congeners (e.g, Aroclor mixes), sulfur compounds, essential oils

Rtx-CLPesticides Column Kit(0.32 mm ID), Includes: Columns, Deactivated Universal Angled GC|YGC| Press-Tight Connector, and Siltek Guard Column, Application-specific columns for organochlorine pesticides and herbicides, Low bleed-ideal for high sensitivity GC-ECD

Rtx-CLPesticides Column Kit (0.25 mm ID). Rtx-CLPesticides Column Kit (0.25 mm ID), Deactivated Universal Angled GC|YGC| Press-Tight Connector, and Siltek Guard Column, Application-specific columns for organochlorine pesticides and herbicides, Low bleed-ideal for high sensitivity GC-ECD

Rtx-CLPesticides Column Kit(0.53 mm ID), Includes: columns, Deactivated Universal Angled GC|YGC| Press-Tight Connector, and IP Deactivated Guard Column, Application-specific columns for organochlorine pesticides and herbicides, Low bleed-ideal for high sensitivity GC-ECD

Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines (fused silica), Hydroguard Deactivation, Length: 30m, Inner diameter: 0.25mm, Tested with a comprehensive test mix, to ensure high inertness.

Rtx-1701 Column 10M. Rtx-1701 Column (fused silica), midpolarity Crossbond phase, Length: 10 m, ID: 0.1mm, Film Thickness: 0.1um, General-purpose columns for alcohols, oxygenates, PCB congeners (e.g, Aroclor mixes), pesticides, and fragrance compounds, Equivalent to USP G46 phase

RTX-5 Column 30M. Rtx-5 column, Low polarity phase; Crossbond diphenyl dimethyl polysiloxane, Length: 30M, ID: 0.53mm, Film Thickness: 1.50um, w/ 10m Integra-Guard, General-purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g. Aroclor mixes), essential oils

RTX-5 Column 40M. Rtx-5 column, Low polarity phase; Crossbond diphenyl dimethyl polysiloxane, Length: 40M, ID: 0.18mm, Film Thickness: 0.40um, General-purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g. Aroclor mixes), essential oils, semivolatiles

RTX-5 Column 20M. Rtx-5 column, Low polarity phase; Crossbond diphenyl dimethyl polysiloxane, Length: 20M, ID: 0.18mm, Film Thickness: 0.20um, General-purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g. Aroclor mixes), essential oils, semivolatiles

Rtx-1 Column 40m. Rtx-1 Column, (fused silica) nonpolar phase; Crossbond dimethyl polysiloxane, Length: 40m, ID: 0.18 mm, Film Thickness: 0.20um, General-purpose columns for solvent impurities, PCB congeners (e.g, Aroclor mixes)simulated distillation, arson accelerants, natural gas odorants

Rtx-1 Column 20m. Rtx-1 Column, (fused silica) nonpolar phase; Crossbond dimethyl polysiloxane, Length: 20m, ID: 0.18 mm, Film Thickness: 0.20um, General-purpose columns for solvent impurities, PCB congeners (e.g, Aroclor mixes)simulated distillation, arson accelerants, natural gas odorants

Rtx-200 Secondary Column 2m. Rtx-200 Secondary Column(fused silica), midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, Length: 2 m, ID: 0.15 mm, Film Thickness: 0.15 um, Convenient 2 m length is ideal for use as a secondary column in GCxGC analyses, General purpose column

Rxi-17 Column 30m. Rxi-17 Column (fused silica), midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, Length: 30m, ID: 0.32mm, Film Thickness: 1.0um, General-purpose columns for pesticides, herbicides, rosin acids, phthalate esters, triglycerides, sterols, Temp range: 40 C to 320 C

Rxi-17 Column 30m. Rxi-17 Column (fused silica), midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, Length: 30m, ID: 0.25mm, Film Thickness: 1.0um, General-purpose columns for pesticides, herbicides, rosin acids, phthalate esters, triglycerides, sterols, Temp range: 40 C to 320 C

Rtx-1 capillary Column, fused silica, Length: 15m, ID: 0.53mm, Film Thickness: 0.25um, with 5m 0.53mm Integra Guard, General-purpose columns for solvent impurities, PCB congeners, simulated distillation, arson accelerants, gases, natural gas odorants, sulfur compound

Rtx-50 Capillary Column 20m. Rtx-50 Capillary Column, Length: 20m, ID: 0.18mm, Film Thickness: 0.40um, General-purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g, Aroclor mixes), essential oils, semivolatiles, Temperature range: -60 C to 350 C

Rtx-35 Capillary Column 40m. Rtx-35 Capillary Column, Length: 40m, ID: 0.18mm, Film Thickness: 0.20um, General-purpose columns for organochlorine pesticides, PCB congeners (e.g, Aroclor mixes), herbicides, pharmaceuticals, sterols, rosin acids, phthalate esters, Equivalent to USP G42 phase

Rtx-VMS Column 75m. Rtx-VMS Column 60m, Length: 60m, ID: 0.53mm, Df: 3.0um, Temp. Limits: -40 to 240/260 C, highly stable polymer that provides outstanding analysis of volatile compounds, in combination with sensitive ion traps, for volatile organic pollutants by GC-MS, Stable to 260 C

Rtx-VMS Column 30m, Length: 30m, ID: 0.53mm, Df: 3.0um, Temp. Limits: -40 to 240/260 C, highly stable polymer that provides outstanding analysis of volatile compounds, in combination with sensitive ion traps, for volatile organic pollutants by GC-MS, Stable to 260 C

Rxi-1 MS Secondary Column 2m. Rxi-1 MS Secondary Column for GCxGC, (fused silica), nonpolar phase; Crossbond dimethyl polysiloxane, Length: 2m, ID: 0.15 mm, Film Thickness: 0.15 um, Convenient 2 m length is ideal for use as a secondary column in GCxGC analyses, Temp range: -60 C to 330/350 C

Rtx-1 Capillary GC Column 60m. Rtx-1 Capillary GC Column, Length: 60m, ID: 0.25mm, Film Thickness: 0.5um, with 10m Integra Guard, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-50 Capillary Column 30m. Rtx-50 Capillary Column, Length: 30m, ID: 0.53mm, Film Thickness: 0.25um, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-1 Capillary Column 15m. Rtx-1 Capillary Column, Length: 15m, ID: 0.53mm, Film Thickness: 0.50um, with 5 meter Integra Guard Column, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-1 Capillary Column 15m. Rtx-1 Capillary Column, Length: 15m, ID: 0.32mm, Film Thickness: 0.25um, with 5m 0.32mm Integra Guard, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-35 Capillary Column 60m. Rtx-35 Capillary Column, Length: 60m, ID: 0.25mm, Film Thickness: 0.25um, with 10m, 0.25mm Integra Guard, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-1 Capillary Column 60m. Rtx-1 Capillary Column, (fused silica), nonpolar phase; Crossbond dimethyl polysiloxane, Length: 60m, ID: 0.32mm, Film Thickness: 0.25um, with 5m, 0.32mm ID Integra Guard, Long lifetime and very low bleed at high operating temperatures, Equivalent to USP G1, G2

Rtx-5 Capillary Column 30m. Rtx-5 Capillary Column, Length: 30m, ID: 0.53mm, Film Thickness: 5.00um, with 10m Integra-Guard Column, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-5 Capillary Column 30m. Rtx-5 Capillary Column, Length: 30m, ID: 0.53mm, Film Thickness: 1.00um, with 10m Integra-Guard Column, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-5 Capillary Column 30m. Rtx-5 Capillary Column, Length: 30m, ID: 0.53mm, Film Thickness: 0.50um, with 10m Integra-Guard Column, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-5 Capillary Column 60m. Rtx-5 Capillary Column, Length: 60m, ID: 0.25mm, Film Thickness: 0.25um, with 10m Integra-Guard Column, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-5 Capillary Column 15m. Rtx-5 Capillary Column, Length: 15m, ID: 0.53mm, Film Thickness: 0.25um, with 10m Integra-Guard Column, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-1 Capillary Column 30m. Rtx-1 Capillary Column, Length: 30m, ID: 0.53mm, Film Thickness: 3.00um, with 10m Integra-Guard Column, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-1 Capillary Column 30m. Rtx-1 Capillary Column, Length: 30m, ID: 0.53mm, Film Thickness: 5.00um, with 10m Integra-Guard Column, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-1 Capillary GC Column 60m. Rtx-1 Capillary GC Column, Length: 60m, ID: 0.32mm, Film Thickness: 1.00um, with 10m Integra Guard, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-1 Capillary GC Column 60m. Rtx-1 Capillary GC Column, Length: 60m, ID: 0.25mm, Film Thickness: 0.5um, with 10m Integra Guard, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-1 Capillary GC Column 60m. Rtx-1 Capillary GC Column, Length: 60m, ID: 0.25mm, Film Thickness: 0.25um, with 10m Integra Guard, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity, for faster analysis time

Rtx-VMS Column 40m 0.18mm ID 1.00um. Rtx-VMS Column, (fused silica), proprietary Crossbond phase, Temp. Limits: -40 to 240/260 C, Length: 40 m, ID: 0.18 mm, df (um): 1.00 um, Application-specific columns for analyzing volatile organic pollutants by GC-MS including Methods TO-15, TMS, and EPA 8260

Rtx-VMS Column 20m 0.18mm ID 1.00um. Rtx-VMS Column, (Fused Silica), proprietary Crossbond phase, Temp. Limits: -40 to 240/260 C, Length: 20 m, ID: 0.18 mm, df (um): 1.00 um, Application-specific columns for analyzing volatile organic pollutants by GC-MS including Methods TO-15, TMS, and EPA 8260

Rtx-200 Column 40m 0.18mm ID 0.40um. Rtx-200 Column, (Fused Silica) midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, Temp. Limits: -20 to 320/340 C, Length: 40 m, ID: 0.18 mm, df (um): 0.40 um, General-purpose columns for solvents, Freon fluorocarbons, alcohols

Rtx-200 Column 20m 0.18mm ID 0.40um. Rtx-200 Column, (Fused Silica) midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, Temp. Limits: -20 to 320/340 C, Length: 20 m, ID: 0.18 mm, df (um): 0.40 um, General-purpose columns for solvents, Freon fluorocarbons, alcohols

Rtx-200 Column 10m 0.18mm ID 0.40um. Rtx-200 Column, (Fused Silica) midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, Temp. Limits: -20 to 320/340 C, Length: 10 m, ID: 0.18 mm, df (um): 0.40 um, General-purpose columns for solvents, Freon fluorocarbons, alcohols

Rtx-200 Column 20m 0.18mm ID 0.20um. Rtx-200 Column, (Fused Silica) midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, Temp. Limits: -20 to 320/340 C, Length: 20 m, ID: 0.18 mm, df (um): 0.20 um, General-purpose columns for solvents, Freon fluorocarbons, alcohols

Rtx-200 Column 10m 0.18mm ID 0.20um. Rtx-200 Column, (Fused Silica) midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, Temp. Limits: -20 to 320/340 C, Temp. Limits: -20 to 310/360 C, Length: 10 m, ID: 0.18 mm, df (um): 0.20 um, General-purpose columns for solvents

Rtx-PCB Column 60m 0.18mm ID 0.18um. Rtx-PCB Column, (fused silica), proprietary Crossbond phase, Temp. Limits: 30 C to 320/340 C, Length: 60 m, ID: 0.18 mm, df (um): 0.18 um, Unique polymer for PCBs analysis by GC-ECD or GC-MS, Good results for other semivolatiles, Low polarity

Rtx-PCB Column 40m 0.18mm ID 0.18um. Rtx-PCB Column, (fused silica),proprietary Crossbond phase, Temp. Limits: 30 C to 320/340 C, Length: 40 m, ID: 0.18 mm, df (um): 0.18 um, Unique polymer for PCBs analysis by GC-ECD or GC-MS, Good results for other semivolatiles, Low polarity

Rtx-PCB Column 20m 0.18mm ID 0.18um. Rtx-PCB Column, (fused silica), proprietary Crossbond phase, Temp. Limits: 30 C to 320 C, Length: 20 m, ID: 0.18 mm, df (um): 0.18 um, Unique polymer for PCBs analysis by GC-ECD or GC-MS, Good results for other semivolatiles, Low polarity

Rtx-VMS Column 60m 0.32mm ID 1.80um. Rtx-VMS Column, (fused silica), proprietary Crossbond phase, Temp. Limits: -40 to 240/260 C, Length: 60 m, ID: 0.32 mm, df (um): 1.80 um, Application-specific columns for analyzing volatile organic pollutants by GC-MS including Methods TO-15, TMS, and EPA 8260

Rtx-VMS Column 30m 0.32mm ID 1.80um. Rtx-VMS Column, (fused silica), proprietary Crossbond phase, Temp. Limits: -40 to 240/260 C, Length: 30 m, ID: 0.32 mm, df (um): 1.80 um, Application-specific columns for analyzing volatile organic pollutants by GC-MS including Methods TO-15, TMS, and EPA 8260

Rtx-VMS Column 60m 0.25mm ID 1.40um. Rtx-VMS Column, (fused silica), proprietary Crossbond phase, Temp. Limits: -40 to 240/260 C, Length: 60 m, ID: 0.25 mm, df (um): 1.40 um, Application-specific columns for analyzing volatile organic pollutants by GC-MS including Methods TO-15, TMS, and EPA 8260

Rtx-VMS Column 30m 0.25mm ID 1.40um. Rtx-VMS Column, (fused silica), proprietary Crossbond phase, Temp. Limits: -40 to 240/260 C, Length: 30 m, ID: 0.25 mm, df (um): 1.40 um, Application-specific columns for analyzing volatile organic pollutants by GC-MS including Methods TO-15, TMS, and EPA 8260

Rtx-VMS Column 60m 0.45mm ID 2.55um. Rtx-VMS Column, (fused silica), proprietary Crossbond phase, Temp. Limits: -40 to 240/260 C, Length: 60 m, ID: 0.45 mm, df (um): 2.55 um, Application-specific columns for analyzing volatile organic pollutants by GC-MS including Methods TO-15, TMS

Rtx-VMS Column 30m 0.45mm ID 2.55um. Rtx-VMS Column, proprietary Crossbond phase, Temp. Limits: -40 to 240/260 C, Length: 30 m, Internal Diameter: 0.45 mm, df (um): 2.55 um, Application-specific columns for analyzing volatile organic pollutants by GC-MS including Methods TO-15, TMS, and EPA 8260

Rtx-1301 (G43) Column 1.8um. Rtx-1301 (G43) Column, fused silica, Length: 60m, ID: 0.32mm, df: 1.8um, low- to midpolarity phase, General-purpose Column for residual solvents, alcohols, oxygenates, and volatile organic compounds, Similar Phase(s): DB-1301, DB-624, DB-624UI, VF-1301ms, VF-624ms

Rxi-1HT Column 0.25um. Rxi-1HT Column, fused silica, Length: 30m, ID: 0.25mm, df: 0.25um, nonpolar phase; dimethyl polysiloxane, 40% longer lifetime from specially designed fused silica tubing, Columns processed for high-temperature applications, such as high molecular weight hydrocarbons

Rtx-PCB Column 0.50um. Rtx-PCB Column, fused silica, Length: 30m, ID: 0.32mm, df: 0.50um, proprietary Crossbond phase, Unique polymer for PCBs analysis by GC-ECD or GC-MS, Good results for other semivolatiles, Low polarity; inert to active compounds, Stable to 340 deg C

Rtx-PCB Column 0.25um. Rtx-PCB Column, fused silica, Length: 60m, ID: 0.25mm, df: 0.25um, proprietary Crossbond phase, Unique polymer for PCBs analysis by GC-ECD or GC-MS, Good results for other semivolatiles, Low polarity; inert to active compounds, Stable to 340 deg C

Rtx-440 Column 0.50um. Rtx-440 Column, fused silica, Length: 30m, ID: 0.32mm, df: 0.50um, midpolarity proprietary Crossbond phase, General-purpose Column with unique selectivity for pesticides, PAHs, Ideal for low/trace-level analyses, Low-bleed, high-resolution Column with unique selectivity

Rtx-440 Column 0.50um. Rtx-440 Column, fused silica, Length: 30m, ID: 0.25mm, df: 0.50um, midpolarity proprietary Crossbond phase, General-purpose Column with unique selectivity for pesticides, PAHs, Ideal for low/trace-level analyses, Low-bleed, high-resolution Column with unique selectivity

Rtx-440 Column 0.25um. Rtx-440 Column, fused silica, Length: 30m, ID: 0.32mm, df: 0.25um, midpolarity proprietary Crossbond phase, General-purpose Column with unique selectivity for pesticides, PAHs, Ideal for low/trace-level analyses, Low-bleed, high-resolution Column with unique selectivity

Rtx-440 Column 0.25um. Rtx-440 Column, fused silica, Length: 30m, ID: 0.25mm, df: 0.25um, midpolarity proprietary Crossbond phase, General-purpose Column with unique selectivity for pesticides, PAHs, Ideal for low/trace-level analyses, Low-bleed, high-resolution Column with unique selectivity

Rtx-5MS Low-Bleed GC-MS Column 1.00um. Rtx-5MS Low-Bleed GC-MS Column fused silica, Length: 15m, ID: 0.53mm, df: 1.00um, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, General purpose Column for drugs, solvent impurities, pesticides, Equivalent to USP G27 and G36 phases

Rtx-5MS Low-Bleed GC-MS Column 0.50um. Rtx-5MS Low-Bleed GC-MS Column fused silica, Length: 60m, ID: 0.32mm, df: 0.50um, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, General purpose Column for drugs, solvent impurities, pesticides, Equivalent to USP G27 and G36 phases

Rtx-5MS Low-Bleed GC-MS Column 0.50um. Rtx-5MS Low-Bleed GC-MS Column fused silica, Length: 60m, ID: 0.25mm, df: 0.50um, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, General purpose Column for drugs, solvent impurities, pesticides, Equivalent to USP G27 and G36 phases

Rtx-5MS Low-Bleed GC-MS Column 0.50um. Rtx-5MS Low-Bleed GC-MS Column fused silica, Length: 15m, ID: 0.53mm, df: 0.50um, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, General purpose Column for drugs, solvent impurities, pesticides, Equivalent to USP G27 and G36 phases

Rtx-5MS Low-Bleed GC-MS Column 0.50um. Rtx-5MS Low-Bleed GC-MS Column fused silica, Length: 15m, ID: 0.25mm, df: 0.50um, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, General purpose Column for drugs, solvent impurities, pesticides, Equivalent to USP G27 and G36 phases

FAMEWAX Column 0.50um. FAMEWAX Column, USP G16, fused silica, Length: 30m, ID: 0.53mm, df: 0.50um, polar phase; Crossbond polyethylene glycol, Application: specific columns for FAMEs, specially tested with a FAME mixture, Similar Phase(s): Omegawax, AT-AquaWax, AT-FAME

Stx-CLPesticides Column 0.25um. Stx-CLPesticides Column, fused silica with Siltek deactivation, Length: 30m, ID: 0.25mm, df: 0.25um, proprietary Crossbond phases, Application: specific columns for organochlorine pesticides and herbicides, Baseline separations in less than 10 minutes

Stx-CLPesticides Column 0.50um. Stx-CLPesticides Column, fused silica with Siltek deactivation, Length: 15m, ID: 0.32mm, df: 0.50um, proprietary Crossbond phases, Application: specific columns for organochlorine pesticides and herbicides, Baseline separations in less than 10 minutes

Stx-CLPesticides Column 0.25um. Stx-CLPesticides Column, fused silica with Siltek deactivation, Length: 15m, ID: 0.25mm, df: 0.25um, proprietary Crossbond phases, Application: specific columns for organochlorine pesticides and herbicides, Baseline separations in less than 10 minutes

Rtx-OPPesticides Column 0.83um. Rtx-OPPesticides Column, fused silica, Length: 30m, ID: 0.53mm, df: 0.83um, proprietary Crossbond phases, Application: specific Column for organophosphorus pesticides, Low bleed: ideal for GC-FPD, GC-NPD, or GC-MS analyses, Stable to 330G340 deg C

Rtx-OPPesticides Column 0.25um. Rtx-OPPesticides Column, fused silica, Length: 30m, ID: 0.25mm, df: 0.25um, proprietary Crossbond phases, Application: specific Column for organophosphorus pesticides, Low bleed: ideal for GC-FPD, GC-NPD, or GC-MS analyses, Stable to 330G340 deg C

Rtx-CLPesticides Column 0.50um. Rtx-CLPesticides Column, fused silica, Length:15m, ID: 0.32mm, df: 0.50um, proprietary Crossbond phases, Application: specific Column for organochlorine pesticides and herbicides, Low bleed: ideal for high sensitivity GC-ECD, Stable to 320G340 deg C

Rtx-CLPesticides Column 0.50um. Rtx-CLPesticides Column, fused silica, Length:15m, ID: 0.25mm, df: 0.50um, proprietary Crossbond phases, Application: specific Column for organochlorine pesticides and herbicides, Low bleed: ideal for high sensitivity GC-ECD, Stable to 320G340 deg C

Rt-TCEP Column 0.40um. Rt-TCEP Column fused silica, Length: 60m, ID: 0.25mm, df: 0.40um, highly polar phase; 1,2,3-tris[2-cyanoethoxy]propane-not bonded, General-purpose Column, ideal for aromatics and oxygenates in gasoline, Similar Phase(s): SPB-TCEP, CP-TCEP

Rt-TCEP Column 0.40um. Rt-TCEP Column fused silica, Length: 30m, ID: 0.25mm, df: 0.40um, highly polar phase; 1,2,3-tris[2-cyanoethoxy]propane-not bonded, General-purpose Column, ideal for aromatics and oxygenates in gasoline, Similar Phase(s): SPB-TCEP, CP-TCEP

Rtx-1301 (G43) Column 1.50um. Rtx-1301 (G43) Column, fused silica, Length: 30m, ID: 0.32mm, df: 1.50um, low- to midpolarity phase, General-purpose columns for residual solvents, alcohols, oxygenates, and volatile organic compounds, Equivalent to USP G43 phase, Similar Phase(s): DB-1301, DB-624

Rtx-5MS capillary GC column 0.50um. Rtx-5MS capillary GC column, Fused Silica, Length: 30m,ID: 0.25mm, df: 0.50um, Crossbond 5% diphenyl - 95%dimethyl polysiloxane, detection, column bleed may not be an issue for certain separations, low-bleed silarylene methyl/phenyl phase, For HP 6850 GCs

Rtx-624 Column 1.80um. Rtx-624 Column, fused silica, Length: 60m, ID: 0.32, df: 1.80um, low to midpolarity phase, Application: specific columns for volatile organic pollutants, Equivalent to USP G43 phase, Similar Phase(s): DB-1301, DB-624, DB-624UI, VF-1301ms, VF-624ms, CP-1301, ZB-624

Rtx-5MS capillary GC column 0.25um. Rtx-5MS capillary GC column, Fused Silica, Length: 60m,ID: 0.25mm, df: 0.25um, Crossbond 5% diphenyl - 95%dimethyl polysiloxane, detection, column bleed may not be an issue for certain separations, low-bleed silarylene methyl/phenyl phase, For HP 6850 GCs

Rtx-5 Capillary GC Column 1.50um. Rtx-5 Capillary GC Column, Length: 30m, ID: 0.53mm, df: 1.50um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 1.00um. Rtx-5 Capillary GC Column, Length: 30m, ID: 0.53mm,df: 1.00um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 1.00um. Rtx-5 Capillary GC Column, Length: 30m, ID: 0.32mm,df: 1.00um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 1.00um. Rtx-5 Capillary GC Column, Length: 15m, ID: 0.53mm,df: 1.00um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 0.50um. Rtx-5 Capillary GC Column, Length: 30m, ID: 0.32mm,df: 0.50um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 0.50um. Rtx-5 Capillary GC Column, Length: 30m, ID: 0.25mm,df: 0.50um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 0.25um. Rtx-5 Capillary GC Column, Length: 60m, ID: 0.32mm,df: 0.25um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 0.25um. Rtx-5 Capillary GC Column, Length: 30m, ID: 0.53mm,df: 0.25um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 0.25um. Rtx-5 Capillary GC Column, Length: 30m, ID: 0.25mm,df: 0.25um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 0.25um. Rtx-5 Capillary GC Column, Length: 15m, ID: 0.53mm,df: 0.25um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 0.25um. Rtx-5 Capillary GC Column, Length: 15m, ID: 0.32mm,df: 0.25um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5 Capillary GC Column 0.25um. Rtx-5 Capillary GC Column, Length: 15m, ID: 0.25mm,df: 0.25um, with 5m Integra-Guard, Reliable, rugged GC column, Column can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-1 Capillary GC Column 5.00um. Rtx-1 Capillary GC Column, Length: 60m, ID: 0.32mm, df: 5.00um with 5m Integra-Guard,Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-1 Capillary GC Column 1.50um. Rtx-1 Capillary GC Column, Length: 30m, ID: 0.53mm, df: 1.50um with 5m Integra-Guard,Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-1 Capillary GC Column 1.50um. Rtx-1 Capillary GC Column, Length: 15m, ID: 0.53mm, df: 1.50um with 5m Integra-Guard,Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-1 Capillary GC Column 1.00um. Rtx-1 Capillary GC Column, Length: 30m, ID: 0.53mm, df: 1.00um with 5m Integra-Guard,Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-1 Capillary GC Column 0.50um. Rtx-1 Capillary GC Column, Length: 15m, ID: 0.32mm, df: 0.50um with 5m Integra-Guard,Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-1 Capillary GC Column 0.25um. Rtx-1 Capillary GC Column, Length: 60m, ID: 0.25mm, df: 0.25um with 5m Integra-Guard,Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-1 Capillary GC Column 0.25um. Rtx-1 Capillary GC Column, Length: 30m, ID: 0.32mm, df: 0.25um with 5m Integra-Guard,Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-1 Capillary GC Column 0.25um. Rtx-1 Capillary GC Column, Length: 15m, ID: 0.25mm, df: 0.25um with 5m Integra-Guard,Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-1701 Column 0.40um. Rtx-1701 Column fused silica, Length: 10m, ID: 0.18mm, df: 0.40um, midpolarity Crossbond phase, General-purpose Column for alcohols, oxygenates, PCB congeners, pesticides, and fragrance compounds, Equivalent to USP G46 phase, Similar Phase(s): DB-1701P

Rtx-1701 Column 0.20um. Rtx-1701 Column fused silica, Length: 20m, ID: 0.18mm, df: 0.20um, midpolarity Crossbond phase, General-purpose Column for alcohols, oxygenates, PCB congeners, pesticides, and fragrance compounds, Equivalent to USP G46 phase, Similar Phase(s): DB-1701P

Rtx-1701 Column 0.20um. Rtx-1701 Column fused silica, Length: 10m, ID: 0.18mm, df: 0.20um, midpolarity Crossbond phase, General-purpose Column for alcohols, oxygenates, PCB congeners, pesticides, and fragrance compounds, Equivalent to USP G46 phase, Similar Phase(s): DB-1701P

Rtx-2330 Column 0.10um. Rtx-2330 Column fused silica, Length: 40m, ID: 0.18mm, df: 0.10um, highly polar phase; biscyanopropyl cyanopropylphenyl polysiloxane, for cis/trans FAMEs, dioxin isomers, Equivalent to USP G8 and G48 phase, Similar Phase(s): VF-23ms

Rtx-2330 Column 0.10um. Rtx-2330 Column fused silica, Length: 20m, ID: 0.18mm, df: 0.10um, highly polar phase; biscyanopropyl cyanopropylphenyl polysiloxane, for cis/trans FAMEs, dioxin isomers, Equivalent to USP G8 and G48 phase, Similar Phase(s): VF-23ms

Rtx-1301 (G43) Column 0.50um. Rtx-1301 (G43) Column fused silica, Length: 60m, ID: 0.53mm, df: 0.50um, low- to midpolarity phase, General-purpose Column for residual solvents, alcohols, oxygenates, Equivalent to USP G43 phase, similar Phase(s): DB-1301, DB-624, DB-624UI

Rtx-35 MS Capillary Column 1.00um. Rtx-35 MS Capillary Column, Length: 30m, ID: 0.53mm, df: 1.00um, Midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, General-purpose Column for organochlorine pesticides, PCB congeners, Equivalent to USP G42 phase, Temperature range: 40 deg C to 320 deg C

Rtx-35 MS Capillary Column 1.00um. Rtx-35 MS Capillary Column, Length: 30m, ID: 0.25mm, df: 1.00um, Midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, General-purpose Column for organochlorine pesticides, PCB congeners, Equivalent to USP G42 phase, Temperature range: 40 deg C to 320 deg C

Rtx-35 MS Capillary Column 1.00um. Rtx-35 MS Capillary Column, Length: 15m, ID: 0.53mm, df: 1.00um, Midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, General-purpose Column for organochlorine pesticides, PCB congeners, Equivalent to USP G42 phase, Temperature range: 40 deg C to 320 deg C

Rtx-35 MS Capillary Column 0.50um. Rtx-35 MS Capillary Column, Length: 30m, ID: 0.32mm, df: 0.50um, Midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, General-purpose Column for organochlorine pesticides, PCB congeners, Equivalent to USP G42 phase, Temperature range: 40 deg C to 320 deg C

Rtx-35 MS Capillary Column 0.25um. Rtx-35 MS Capillary Column, Length: 30m, ID: 0.32mm, df: 0.25um, Midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, General-purpose Column for organochlorine pesticides, PCB congeners, Equivalent to USP G42 phase, Temperature range: 40 deg C to 320 deg C

Rtx-35 MS Capillary Column 0.25um. Rtx-35 MS Capillary Column, Length: 30m, ID: 0.25mm, df: 0.25um, Midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, General-purpose Column for organochlorine pesticides, PCB congeners, Equivalent to USP G42 phase, Temperature range: 40 deg C to 320 deg C

Rtx-35 MS Capillary Column 0.25um. Rtx-35 MS Capillary Column, Length: 15m, ID: 0.25mm, df: 0.25um, Midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, General-purpose Column for organochlorine pesticides, PCB congeners, Equivalent to USP G42 phase, Temperature range: 40 deg C to 320 deg C

Rtx-1 MS Capillary GC Column 0.10um. Rtx-1 MS Capillary GC Column, Length: 30m, ID: 0.25mm, df: 0.10um, with 5m Integra-Guard, Reliable, rugged GC Column, can be solvent rinsed, based on polysiloxane; functional groups added to the polymers to vary selectivity

Rtx-OPPesticides2 Column 0.20um. Rtx-OPPesticides2 Column fused silica, Length: 20m, ID: 0.18mm, df: 0.20um, proprietary Crossbond phases, Application: specific Column for organophosphorus pesticides, Low bleed: ideal for GC-FPD, GC-NPD, or GC-MS analyses

Rtx-OPPesticides2 Column 0.25um. Rtx-OPPesticides2 Column fused silica, Length: 30m, ID: 0.25mm, df: 0.25um, proprietary Crossbond phases, Application: specific Column for organophosphorus pesticides, Low bleed: ideal for GC-FPD, GC-NPD, or GC-MS analyses

Rtx-OPPesticides2 Column 0.50um. Rtx-OPPesticides2 Column fused silica, Length: 30m, ID: 0.53mm, df: 0.50um, proprietary Crossbond phases, Application: specific Column for organophosphorus pesticides, Low bleed: ideal for GC-FPD, GC-NPD, or GC-MS analyses

Rtx-OPPesticides2 Column 0.32um. Rtx-OPPesticides2 Column fused silica, Length: 30m, ID: 0.32mm, df: 0.32um, proprietary Crossbond phases, Application: specific Column for organophosphorus pesticides, Low bleed: ideal for GC-FPD, GC-NPD, or GC-MS analyses

Rtx-1614 Column 0.10um. Rtx-1614 Column fused silica, Length: 15m, ID: 0.25mm, df: 0.10um, 5% diphenyl, 95% dimethyl polysiloxane, Optimized for PBDE analysis, Short column option resolves BDE-209 3 times faster, with less thermal breakdown, for greater analytical sensitivity

Rtx-1614 Column 0.10um. Rtx-1614 Column fused silica, Length: 30m, ID: 0.25mm, df: 0.10um, 5% diphenyl, 95% dimethyl polysiloxane, Optimized for PBDE analysis, Short column option resolves BDE-209 3 times faster, with less thermal breakdown, for greater analytical sensitivity

Rtx-1701 Column 1.00um. Rtx-1701 Column, fused silica, Length: 30m, ID: 0.32mm, df: 1.00um, midpolarity Crossbond phase, with 5m Integra-Guard, General-purpose columns for alcohols, oxygenates, PCB congeners, pesticides, and fragrance compounds, Equivalent to USP G46 phase

Base-Deactivated Guard/Retention Gap Column 5m. Base-Deactivated Guard/Retention Gap Column, fused silica, Length: 5m, ID: 0.32mm, Tested with a basic amine test mix, Excellent inertness for basic compounds, Recommended for use with Rtx-5 Amine, Rtx-35 Amine, Rtx-35 Amine, capillary columns

Rtx-5MS Capillary GC Column 0.50um. Rtx-5MS Capillary GC Column Length: 60m,ID: 0.32mm, df: 0.50um, with 10m Integra-Guard, Reliable, rugged GC column, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5MS Capillary GC Column 0.50um. Rtx-5MS Capillary GC Column, Length: 30m, ID: 0.32mm, df: 0.50um, with 5m Integra-Guard, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5MS Capillary GC Column 0.25um. Rtx-5MS Capillary GC Column, Length: 60m, ID: 0.25mm, df: 0.25um, with 5m Integra-Guard, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-5MS Capillary GC Column 0.25um. Rtx-5MS Capillary GC Column, Length: 15m, ID: 0.25mm, df: 0.25um, with 5m Integra-Guard, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane;fun-ctional groups added to the polymers to vary selectivity

Rtx-624 Capillary GC Column 1.80um. Rtx-624 Capillary GC Column, Length: 30m, ID: 0.32mm, df: 1.40um, with 5m Integra-Guard, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane; fun-ctional groups added to the polymers to vary selectivity

Rtx-624 Capillary GC Column 1.40um. Rtx-624 Capillary GC Column, Length: 60m, ID: 0.25mm, df: 1.40um, with 5m Integra-Guard, Reliable, rugged GC columns, Columns can be solvent rinsed, based on polysiloxane; fun-ctional groups added to the polymers to vary selectivity

Rtx-CLPesticides Column 0.18um. Rtx-CLPesticides Column fused silica, Iength: 20m, ID: 0.18mm, df: 0.18um, proprietary Crossbond phases, Application: specific Column for organochlorine pesticides and herbicides, Low bleed: ideal for high sensitivity GC-ECD, Stable to 320G340 deg C

Rtx-200MS Capillary Column 1.50um. Rtx-200MS Capillary Column, Length: 30m, ID: 0.53mm, df: 1.50um, Midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, for solvents, Freon fluorocarbons, alcohols, ketones, silanes, glycols. Excellent confirmation column, Equivalent to USP G6 phase

Rtx-200MS Capillary Column 1.00um. Rtx-200MS Capillary Column, Length: 30m, ID: 0.53mm, df: 1.00um, Midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, for solvents, Freon fluorocarbons, alcohols, ketones, silanes, glycols. Excellent confirmation column, Equivalent to USP G6 phase

Rtx-200MS Capillary Column 0.50um. Rtx-200MS Capillary Column, Length: 30m, ID: 0.53mm, df: 0.50um, Midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, for solvents, Freon fluorocarbons, alcohols, ketones, silanes, glycols. Excellent confirmation column, Equivalent to USP G6 phase

Rtx-200MS Capillary Column 0.50um. Rtx-200MS Capillary Column, Length: 30m, ID: 0.32mm, df: 0.50um, Midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, for solvents, Freon fluorocarbons, alcohols, ketones, silanes, glycols. Excellent confirmation column, Equivalent to USP G6 phase

Rtx-200MS Capillary Column 0.25um. Rtx-200MS Capillary Column, Length: 30m, ID: 0.32mm, df: 0.25um, Midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, for solvents, Freon fluorocarbons, alcohols, ketones, silanes, glycols. Excellent confirmation column, Equivalent to USP G6 phase

Rtx-200MS Capillary Column 0.25um. Rtx-200MS Capillary Column, Length: 15m, ID: 0.25mm, df: 0.25um, Midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, for solvents, Freon fluorocarbons, alcohols, ketones, silanes, glycols. Excellent confirmation column, Equivalent to USP G6 phase

Rtx-200MS Capillary Column 0.10um. Rtx-200MS Capillary Column, Length: 30m, ID: 0.25mm, df: 0.10um, Midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, for solvents, Freon fluorocarbons, alcohols, ketones, silanes, glycols. Excellent confirmation column, Equivalent to USP G6 phase

Rtx-200MS Capillary Column 0.10um. Rtx-200MS Capillary Column, Length: 15m, ID: 0.25mm, df: 0.10um, Midpolarity phase; Crossbond trifluoropropylmethyl polysiloxane, for solvents, Freon fluorocarbons, alcohols, ketones, silanes, glycols. Excellent confirmation column, Equivalent to USP G6 phase

Rxi-17Sil MS Secondary Column for GCxGC 0.18mm. Rxi-17Sil MS Secondary Column for GCxGC fused silica, Length: 2m, ID: 0.18mm, df: 0.18um, midpolarity Crossbond phase, Convenient 2 m length is ideal for use as a secondary column in GCxGC analyses, Excellent inertness and selectivity

Rxi-5Sil MS Secondary Column for GCxGC 0.15um. Rxi-5Sil MS Secondary Column for GCxGC fused silica, Length: 2m, ID: 0.15mm, df: 0.15um, low-polarity phase; Crossbond 1,4-bis(dimethylsiloxy)phenylene dimethyl polysiloxane, Engineered to be a low bleed GC/MS column, Excellent inertness

Stx-CLPesticides2 Column 0.20um. Stx-CLPesticides2 Column, Length: 30m, ID: 0.25mm, df: 0.20um, fused silica with Siltek deactivation, proprietary Crossbond phases, Application: specific Column for organochlorine pesticides and herbicides, Baseline separations in less than 10 minutes

Stx-CLPesticides2 Column 0.25um. Stx-CLPesticides2 Column, Length: 15m, ID: 0.32mm, df: 0.25um, fused silica with Siltek deactivation, proprietary Crossbond phases, Application: specific Column for organochlorine pesticides and herbicides, Baseline separations in less than 10 minutes

Stx-CLPesticides2 Column 0.20um. Stx-CLPesticides2 Column, Length: 15m, ID: 0.25mm, df: 0.20um, fused silica with Siltek deactivation, proprietary Crossbond phases, Application: specific Column for organochlorine pesticides and herbicides, Baseline separations in less than 10 minutes

Rtx-CLPesticides2 Column 0.20um. Rtx-CLPesticides2 Column fused silica, Length: 60m, ID: 0.25mm, df: 0.20um, proprietary Crossbond phases, Application: specific Column for organochlorine pesticides and herbicides, Low bleed: ideal for high sensitivity GC-ECD, Baseline separations

Rtx-CLPesticides2 Column 0.25um. Rtx-CLPesticides2 Column fused silica, Length: 15m, ID: 0.32mm, df: 0.25um, proprietary Crossbond phases, Application: specific Column for organochlorine pesticides and herbicides, Low bleed: ideal for high sensitivity GC-ECD, Baseline separations

Rtx-502.2 Column 2.55um. Rtx-502.2 Column fused silica, Length: 75m, ID: 0.45mm, df: 2.55um, proprietary Crossbond diphenyl/dimethyl polysiloxane phase, Application: specific Column with unique selectivity for volatile organic pollutants, Excellent separation of trihalomethanes

Rtx-1701 Capillary Column 1.00um. Rtx-1701 Capillary Column with 5m Integra-Guard, 14% cyanopropylphenyl/86% dimethyl polysiloxane, midpolarity Crossbond phase, ID: 0.53mm, Length: 30m, df: 1.00um, Application: To ensure long-term reproducibility, Column -to-column consistency, and low bleed

Rtx-1701 Capillary Column 1.00um. Rtx-1701 Capillary Column with 5m Integra-Guard, 14% cyanopropylphenyl/86% dimethyl polysiloxane, midpolarity Crossbond phase, ID: 0.25mm, Length: 30m, df: 1.00um, Application: To ensure long-term reproducibility, Column -to-column consistency, and low bleed

Rtx-1701 Capillary Column 0.50um. Rtx-1701 Capillary Column with 5m Integra-Guard, 14% cyanopropylphenyl/86% dimethyl polysiloxane, midpolarity Crossbond phase, ID: 0.32mm, Length: 30m, df: 0.50um, Application: To ensure long-term reproducibility, Column -to-column consistency, and low bleed

Rtx-1701 Capillary Column 0.50um. Rtx-1701 Capillary Column with 5m Integra-Guard, 14% cyanopropylphenyl/86% dimethyl polysiloxane, midpolarity Crossbond phase, ID: 0.53mm, Length: 15m, df: 0.50um, Application: To ensure long-term reproducibility, Column -to-column consistency, and low bleed

Rtx-1701 Capillary Column 0.25um. Rtx-1701 Capillary Column with 5m Integra-Guard, 14% cyanopropylphenyl/86% dimethyl polysiloxane, midpolarity Crossbond phase, ID: 0.53mm, Length: 30m, df: 0.25um, Application: To ensure long-term reproducibility, Column -to-column consistency, and low bleed

Rtx-1701 Capillary Column 0.25um. Rtx-1701 Capillary Column with 5m Integra-Guard, 14% cyanopropylphenyl/86% dimethyl polysiloxane, midpolarity Crossbond phase, ID: 0.32mm, Length: 15m, df: 0.25um, Application: To ensure long-term reproducibility, Column -to-column consistency, and low bleed

Stabilwax Capillary Column 0.25um. StabilwaxCapillary Column, polar phase; Crossbond polyethylene glycol, with 5m Integra-Guard, length: 60m, Temperature: 40-260deg C, df: 0.25um, Application: purity testing of chemicals, analyzing impurities in water matrices & alcoholic beverages

Stabilwax Capillary Column 0.25um. StabilwaxCapillary Column, polar phase; Crossbond polyethylene glycol, with 5m Integra-Guard, length: 30m, Temperature: 40-260deg C, df: 0.25um, Application: purity testing of chemicals, analyzing impurities in water matrices & alcoholic beverages

Rtx-1701 Capillary Column 0.25um. Rtx-1701 Capillary Column with 10m Integra-Guard, 14% cyanopropylphenyl/86% dimethyl polysiloxane, midpolarity Crossbond phase, ID: 0.25mm, Length: 30m, df: 0.25um, Application: To ensure long-term reproducibility, Column -to-column consistency, and low bleed

Base-Deactivated Column 5 m. Base-Deactivated Guard/Retention Gap Column (fused silica), Temperature: 315deg C, Nominal ID: 0.53mm, Nominal OD: 0.69 +/- 0.05 mm, Length: 5 m, Application: Excellent inertness for basic compounds, for use with Rtx-5/35/Volatile Amine, Stabilwax-DB capillary Column

Base-Deactivated Column 5 m. Base-Deactivated Guard/Retention Gap Column (fused silica), Temperature: 315deg C, Nominal ID: 0.25 mm, Nominal OD: 0.37 +/- 0.04 mm, Length: 5 m, Application: Excellent inertness for basic compounds, for use with Rtx-5/35/Volatile Amine, Stabilwax-DB capillary Column

Rtx-1301 (G43) Capillary Column 3um. Rtx-1301 (G43) Capillary GC Column (Fused Silica), Crossbond 6% cyanopropylphenyl/94% dimethyl polysiloxane, with 5m Integra-Guard, Temperature: -20-240deg C, ID: 0.53mm, Length: 60m, df: 3um, Application: solvent, oxygenates & Alcoholic Beverage Analysis

Rtx-1301 (G43) Capillary Column 1um. Rtx-1301 (G43) Capillary GC Column (Fused Silica), Crossbond 6% cyanopropylphenyl/94% dimethyl polysiloxane, with 5m Integra-Guard, Temperature: -20-260deg C, ID: 0.53mm, Length: 30m, df: 1um, Application: solvent, oxygenates & Alcoholic Beverage Analysis

Rtx-BAC1 Capillary Column 3um. Rtx-BAC1 Capillary Column, with 5m Integra-Guard, Temperature: -20- 240/260deg C, ID: 0.53mm, Length: 30m, df: 3um, Application: for blood alcohol analysis, abused inhalant anesthetics, Y-hydroxybutyrate (GHB)/Y-butyrolactone, glycols & common industrial solvents.

Stabilwax Capillary Column 0.25um. StabilwaxCapillary Column, polar phase; Crossbond polyethylene glycol, with 5m Integra-Guard, Temperature: 40-260deg C, ID: 0.32mm, Length: 15m, df: 0.25um, Application: purity testing of chemicals, analyzing impurities in water matrices & alcoholic beverages

Rtx-CLPesticides2 Column 0.14um. Rtx-CLPesticides2 Column s (fused silica), proprietary Crossbond phases, Temperature: -60-320/330deg C, Length: 20 m, ID: 0.18mm, df: 0.14um, Application: Low bleed, To overcome the coelutions and analyte breakdown in organochlorine pesticides and herbicides

Rtx-CLPesticides2 Column 0.14um. Rtx-CLPesticides2 Column s (fused silica), proprietary Crossbond phases, Temperature: -60-320/330deg C, Length:10 m, ID: 0.18mm, df: 0.14um, Application: Low bleed, To overcome the coelutions and analyte breakdown in organochlorine pesticides and herbicides

Rt-2340 NB Capillary Gas Chromatography Packed Column 0.20um. Rt-2340 NB Capillary Gas Chromatography Packed Column, Liquid phase, Temperature: 25-275 deg C, Inner Diameter: 0.32mm, Length: 60m, df: 0.20um

Rtx-5 (G27) Column 5.00um. Rtx-5 (G27) Column s (fused silica), low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Temperature: -60-325/350 deg C, ID: 0.53mm, Length: 30m, df: 5.00um, Application: for solvent impurities, pesticides, PCB congeners, essential oils, semivolatiles.

Rtx-5 (G27) Column 0.25um. Rtx-5 (G27) Column s (fused silica), low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Temperature: -60-325/350 deg C, ID: 0.25mm, Length: 15m, df: 0.25um, Application: for drugs, solvent impurities, pesticides, PCB congeners, essential oils, semivolatiles

Rtx-5 (G27) Column 1um. Rtx-5 (G27) Column s (fused silica), low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Temperature: -60-325/350 deg C, ID: 0.53mm, Length: 30m, df: 1um, Application: for drugs, solvent impurities, pesticides, PCB congeners, essential oils, semivolatiles.

Stabilwax Capillary Column 2.00um. StabilwaxCapillary Column, polar phase; Crossbond polyethylene glycol, with 5m Integra-Guard, Temperature: 40-260deg C, ID: 0.53mm, Length: 30m, df: 2.00um, Application: purity testing of chemicals, analyzing impurities in water matrices & alcoholic beverages

Stabilwax Capillary Column 0.25um. StabilwaxCapillary Column, polar phase; Crossbond polyethylene glycol, with 10m Integra-Guard, Temperature: 40-260deg C, ID: 0.25mm, Length: 30m, df: 0.25um, Application: purity testing of chemical, analyzing impurities in water matrices & alcoholic beverages

Rtx-35 MS Capillary Column 0.25um. Rtx-35 MS Capillary Column, (Crossbond 35% diphenyl/65% dimethyl polysiloxane), with 5m Integra-Guard, Temperature: 40-320/340deg C, ID: 0.25mm, Length: 30m, df: 0.25um, Application: low-bleed, solvent impurities, hydrocarbon, essential oil, PCB congeners

Stabilwax Capillary Column 0.25um. StabilwaxCapillary Column, polar phase; Crossbond polyethylene glycol, with 5m Integra-Guard, Temperature: 40-260deg C, ID: 0.25mm, Length: 60m, df: 0.25um, Application: purity testing of chemicals, analyzing impurities in water matrices & alcoholic beverages

Rtx-5 Amine Column 0.25um. Rtx-5 Amine Column, fused silica, low-polarity phase; Crossbond 5% diphenyl/95% dimethyl polysiloxane, Temperature: -60-300/315deg C, ID: 0.25mm, Length: 15m, df: 0.25um, Application: analyzing basic/neutral/adsorptive compound with oxygen group susceptible to phenol

Rtx-35 Amine Column 1.5um. Rtx-35 Amine Column (fused silica), midpolarity phase; Crossbond 35% diphenyl/65% dimethyl polysiloxane, Temperature: 0 to 220 deg C, Length: 30 m, ID: 0.32 mm, df: 1.5um, Application: for neutral/adsorptive compound with oxygen group susceptible to hydrogen bonding

Rtx-35 Amine Column 1.0um. Rtx-35 Amine Column (fused silica), midpolarity phase; Crossbond 35% diphenyl/65% dimethyl polysiloxane, Temperature: 0 to 220 deg C, Length: 30 m, ID: 0.53 mm, df: 1.0um, Application: for neutral/adsorptive compound with oxygen group susceptible to hydrogen bonding

Rtx-35 Amine Column 1.0um. Rtx-35 Amine Column (fused silica), midpolarity phase; Crossbond 35% diphenyl/65% dimethyl polysiloxane, Temperature: 0 to 220 deg C, Length: 30 m, ID: 0.32 mm, df: 1.0um, Application: for neutral/adsorptive compound with oxygen group susceptible to hydrogen bonding

Rtx-35 Amine Column 1.0um. Rtx-35 Amine Column (fused silica), midpolarity phase; Crossbond 35% diphenyl/65% dimethyl polysiloxane, Temperature: 0 to 220 deg C, Length: 30 m, ID: 0.25 mm, df: 1.0um, Application: for neutral/adsorptive compound with oxygen group susceptible to hydrogen bonding

Rtx-35 Amine Column 1.0um. Rtx-35 Amine Column (fused silica), midpolarity phase; Crossbond 35% diphenyl/65% dimethyl polysiloxane, Temperature: 0 to 220 deg C, Length: 15 m, ID: 0.53 mm, df: 1.0um, Application: for neutral/adsorptive compound with oxygen group susceptible to hydrogen bonding

Rtx-35 Amine Column 1.0um. Rtx-35 Amine Column (fused silica), midpolarity phase; Crossbond 35% diphenyl/65% dimethyl polysiloxane, Temperature: 0 to 220 deg C, Length: 15 m, ID: 0.32 mm, df: 1.0um, Application: for neutral/adsorptive compound with oxygen group susceptible to hydrogen bonding

Rtx-35 Amine Column 1.0um. Rtx-35 Amine Column (fused silica), midpolarity phase; Crossbond 35% diphenyl/65% dimethyl polysiloxane, Temperature: 0 to 220 deg C, Length: 15 m, ID: 0.25 mm, df: 1.0um, Application: for neutral/adsorptive compound with oxygen group susceptible to hydrogen bonding

Rtx-35 Amine Column 0.50 um. Rtx-35 Amine Column (fused silica), midpolarity phase; Crossbond 35% diphenyl/65% dimethyl polysiloxane, Temperature: 0 to 220 deg C, Length: 15 m, ID: 0.25 mm, df: 0.50 um, Application: for neutral/adsorptive compound with oxygen group susceptible to hydrogen bonding

Rtx-Dioxin2 Column 0.18 um. Rtx-Dioxin2 Column (fused silica), proprietary Crossbond phase, Temperature: 20-320/340 deg C, ID: 0.18 mm, Length: 40 m, df: 0.18 um, Application: Unique selectivity for toxic dioxin and furan congeners, Isomer specificity for 2, 3, 7, 8-TCDD and 2, 3, 7, 8-TCDF

Rtx-50 Column 1.00um. Rtx-50 Column (fused silica), midpolarity phase; Crossbond phenyl methyl polysiloxane, Temperature: 40 - 260/280 deg C, Length: 30 m, Internal Diameter: 0.53 mm, df: 1.00um, Application: dual-Column analysis, for pesticides, herbicides, rosin acids, phthalate esters, sterols

Rtx-5 DHA Tuning Column (fused silica) 1.00 um. Rtx-5 DHA Tuning Column (fused silica), Crossbond 5% diphenyl/95% dimethyl polysiloxane, Temperature: -60 - 325/350 deg C, Length: 5 m, Internal Diameter: 0.25 mm, df: 1.00 um, Application: for hydrocarbon analysis

Rtx-35 Column 0.50um. Rtx-35 Column s (fused silica), midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, Temperature: 40-320deg C, Length: 30m, ID: 0.53mm, df: 0.50um, Application: for organochlorine pesticides, PCB congeners, herbicides, pharmaceuticals, rosin acids, phthalate esters

Siltek-Deactivated Column 10 m. Siltek-Deactivated Guard Column /Transfer Lines (fused silica), Temperature: 380deg C, Nominal ID: 0.53mm, Nominal OD: 0.69 +/- 0.05mm, Length: 10m, Application: to ensure high inertness, chlorinated pesticide analysis, Analyze tough sample quickly, Minimize bleed

Stabilwax-MS Column 0.25 um. Stabilwax-MS Column (fused silica), High-polarity, stable polyethylene glycol (PEG) stationary phase, Temperature: 40-250/260 deg C, Length: 30 m, ID: 0.25 mm, df: 0.25 um, Application: for purity testing of chemicals, impurities in water matrices, alcoholic beverages.

Rtx-CLPesticides Column 0.50um. Rtx-CLPesticides Column s (fused silica), proprietary Crossbond phases, Temperature: -60-320/340deg C, Length: 30m, ID: 0.53 mm, df: 0.50um, Application: Low bleed, To overcome the coelutions and analyte breakdown in organochlorine pesticides and herbicides

Rtx-CLPesticides Column 0.50um. Rtx-CLPesticides Column s (fused silica), proprietary Crossbond phases, Temperature: -60-320/340deg C, Length: 30m, ID: 0.32mm, df: 0.50um, Application: Low bleed, To overcome the coelutions and analyte breakdown in organochlorine pesticides and herbicides

Rtx-CLPesticides Column 0.25um. Rtx-CLPesticides Column s (fused silica), proprietary Crossbond phases, Temperature: -60-320/340deg C, Length: 30m, ID: 0.25mm, df: 0.25um, Application: Low bleed, To overcome the coelutions and analyte breakdown in organochlorine pesticides and herbicides

Rtx-624 Column 3.00um. Rtx-624 Column s (fused silica), low- to midpolarity phase, Temperature:-20-240deg C, Length: 30m, Inner Diameter: 0.53mm, df: 3.00um, Application: for analyzing volatile organic pollutants (U.S. EPA method), resolution of early eluting compounds, Equivalent to USP G43 phase

Rtx-624 Column 1.80um. Rtx-624 Column s (fused silica), low- to midpolarity phase, Temperature:-20-240deg C, Length: 30m, Inner Diameter: 0.32mm, df: 1.80um, Application: for analyzing volatile organic pollutants (U.S. EPA method), resolution of early eluting compounds, Equivalent to USP G43 phase

Intermediate-Polarity Deactivated Guard Column 5 m. Intermediate-Polarity Deactivated Guard Column, Temperature: 325deg C, Nominal Inner Diameter: 0.45mm, Nominal Outer Diameter: 0.69 +/- 0.05, Length: 5 m, Application: to ensure high inertness, Use with most common solvents.

Rtx-5MS GC-MS Column 0.25um. Rtx-5MS Low-Bleed GC-MS Column s (fused silica), low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Temperature: -60-330/350deg C, Length: 15m, ID: 0.25mm, df: 0.25um, Application: for drugs, solvent impurities, hydrocarbons, PCB congeners, essential oils

Rtx-1701 Column 0.25 um. Rtx-1701 Column s (fused silica), midpolarity Crossbond phase, Temperature: -20-260/280deg C, Length: 30 m, Internal Diameter: 0.25 mm, df: 0.25 um, Application: ensure long-term reproducibility, Column -to-Column consistency & low bleed, for alcohols, oxygenates

Rt-BDEXsp Column 0.25um. Rt-BDEXsp Column fused silica, 2,3-di-O-propyl-6-O-tert-butyl dimethylsilyl beta cyclodextrin added to 14% cyanopropylphenyl/86% dimethyl polysiloxane, Temperature: 40-230deg C, Length: 30m, ID: 0.25mm, df: 0.25um, Application: dual-Column, for enantiomeric separations

Rt-BDEXsa Column 0.25um. Rt-BDEXsa Column fused silica, 2,3-di-acetoxy-6-O-tert-butyl dimethylsilyl beta cyclodextrin added to 14% cyanopropylphenyl/86% dimethyl polysiloxane, Temperature: 40 to 230deg C, Length: 30m, ID: 0.25mm, df: 0.25um, Application: for ester, lactones, fruit flavor component

Rt-BDEXsa Column 0.25um. Rt-BDEXsa Column fused silica, 2,3-di-acetoxy-6-O-tert-butyl dimethylsilyl beta cyclodextrin added to 14% cyanopropylphenyl/86% dimethyl polysiloxane, Temperature: 40 to 230deg C, Length: 30m, ID: 0.32mm, df: 0.25um, Application: for ester, lactones, fruit flavor component

Rt-BDEXse Column 0.25um. Rt-BDEXse Column (fused silica), 2,3-di-O-ethyl-6-O-tert-butyl dimethylsilyl beta cyclodextrin added into 14% cyanopropylphenyl/86% dimethyl polysiloxane, Temperature: 40-230deg C, Length: 30 m, ID: 0.25 mm, df: 0.25um, Application: resolution for limonene, styrene oxides

Rt-BDEXse Column 0.25um. Rt-BDEXse Column fused silica, 2,3-di-O-ethyl-6-O-tert-butyl dimethylsilyl beta cyclodextrin added into 14% cyanopropylphenyl/86% dimethyl polysiloxane, Temperature: 40-230deg C, Length: 30m, ID: 0.32mm, df: 0.25um, Application: resolution for limonene, styrene oxides

Rt-BDEXsm Column 0.25um. Rt-BDEXsm Column (fused silica), 2,3-di-O-methyl-6-O-tert-butyl dimethylsilyl beta cyclodextrin added into 14% cyanopropylphenyl/86% dimethyl polysiloxane, Temperature: 40-230deg C, Length: 30 m, ID: 0.25 mm, df: 0.25um, Application: for chiral compound in essential oils

Rt-BDEXsm Column 0.25um. Rt-BDEXsm Column (fused silica), 2,3-di-O-methyl-6-O-tert-butyl dimethylsilyl beta cyclodextrin added into 14% cyanopropylphenyl/86% dimethyl polysiloxane, Temperature: 40-230deg C, Length: 30 m, ID: 0.32 mm, df: 0.25um, Application: for chiral compounds in essential oils

Rtx-5 Amine Column 1um. Rtx-5 Amine Column (fused silica), low-polarity phase; Crossbond 5% diphenyl/95% dimethyl polysiloxane, Temperature: -60-300/315 deg C, ID: 0.32mm, Length: 30m, df: 1um, Application: analyzing basic/neutral/adsorptive compounds with oxygen groups susceptible to phenols

Stabilwax-DB Capillary Column 0.25 um. Stabilwax-DB Capillary Column (fused silica), polar phase; Crossbond base-deactivated Carbowax polyethylene glycol, Length: 60 m, ID: 0.32 mm, df: 0.25 um, Application: reduce adsorption, improve responses for basic compound, without analyte derivatization

Siltek-Deactivated Column 5 m. Siltek-Deactivated Guard Column /Transfer Lines (fused silica), Temperature: 380deg C, Nominal ID: 0.53 mm, Nominal OD: 0.45 +/- 0.04 mm, Length: 5 m, Application: to ensure high inertness, for chlorinated pesticide analysis, Analyze active samples

Siltek-Deactivated Column 5 m. Siltek-Deactivated Guard Column /Transfer Lines (fused silica), Temperature: 380deg C, Nominal ID: 0.32 mm, Nominal OD: 0.45 +/- 0.04 mm, Length: 5 m, Application: to ensure high inertness, for chlorinated pesticide analysis, Analyze active samples

Intermediate-Polarity Deactivated Column 0.15 mm. Intermediate-Polarity Deactivated Guard/Retention Gap Column s/Transfer Lines (fused silica), Temperature: 325 deg C, Nominal ID: 0.15 mm, Nominal OD: 0.363 +/- 0.012 mm, Length: 5m, Application: to ensure high inertness, Use with most common solvent

Hydroguard Water-Resistant Column 30m. Hydroguard Water-Resistant Guard/Retention Gap Column /Transfer Line/Tubing, fused silica, Temperature: 325deg C, Nominal ID: 0.53mm, Nominal OD: 0.69 +/- 0.05mm, Length: 30m, Application: Extend Column life by preventing degradation from steam-cleaning

Hydroguard Water-Resistant Column 30m. Hydroguard Water-Resistant Guard/Retention Gap Column /Transfer Line/Tubing, fused silica, Temperature: 325deg C, Nominal ID: 0.32mm, Nominal OD: 0.45 +/- 0.04mm, Length: 30m, Application: Extend Column life by preventing degradation from steam-cleaning

Hydroguard Water-Resistant Column 30m. Hydroguard Water-Resistant Guard/Retention Gap Column /Transfer Line/Tubing, fused silica, Temperature: 325deg C, Nominal ID: 0.25mm, Nominal OD: 0.37 +/- 0.04mm, Length: 30m, Application: Extend Column life by preventing degradation from steam-cleaning

Rt-BDEXcst Column 0.25um. Rt-BDEXcst Column (fused silica), cyclodextrin material added into 14% cyanopropylphenyl/86% dimethyl polysiloxane, Temperature: 40 to 230deg C, Length: 30 m, ID: 0.25 mm, df: 0.25um, Application: stationary phase for the fragrance industry & pharmaceutical applications

Siltek-Deactivated Guard/Retention Gap Column 10 m. Siltek-Deactivated Guard/Retention Gap Column/Transfer Lines (fused silica), Nominal Inner Diameter: 0.25 mm, Nominal Outer Diameter: 0.37 +/- 0.04 mm, Length: 30 m, Application: to ensure high inertness, Use with most common solvents.

Intermediate-Polarity Deactivated Column 5m. Intermediate-Polarity Deactivated Guard/Retention Gap Column/Transfer Line (fused silica), Temperature: 325deg C, Nominal ID: 0.18mm, Nominal OD: 0.37 +/- 0.04 mm, Length: 5m, Application: to ensure high inertness, for chlorinated pesticide analysis

Intermediate-Polarity Deactivated Guard/Retention Gap Columns/Transfer Lines, fused silica, Length: 10M, ID: 0.32mm, Tested with a comprehensive test mix to ensure high inertness. Maximum temperature: 325 deg C.

Intermediate-Polarity Deactivated Guard/Retention Gap Columns/Transfer Lines, fused silica, Length: 10M, ID: 0.53mm, Tested with a comprehensive test mix to ensure high inertness. Maximum temperature: 325 deg C.

Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines. Deactivated, Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines, fused silica, ID: 0.32mm, Length: 5M, Tested with a comprehensive test mix, to ensure high inertness. Maximum Temperature: 325 deg C.

Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines. Deactivated, Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines, fused silica, ID: 0.25mm, Length: 5M, Tested with a comprehensive test mix, to ensure high inertness. Maximum temperature: 325 deg C.

Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines. Deactivated, Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines, fused silica, ID: 0.18mm, Length: 5M, Tested with a comprehensive test mix, to ensure high inertness. Maximum temperature: 325 deg C.

Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines. Deactivated, Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines, fused silica, ID: 0.15mm, Length: 5M, Tested with a comprehensive test mix, to ensure high inertness. Maximum temperature: 325 deg C.

Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines. Deactivated, Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines, fused silica, ID: 0.10mm, Length: 5M, Tested with a comprehensive test mix, to ensure high inertness. Maximum temperature: 325 deg C.

Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines. Deactivated, Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines, fused silica, ID: 0.05mm, Length: 5M, Tested with a comprehensive test mix, to ensure high inertness. Maximum temperature: 325 deg C.

Rtx-1301 (G43) Column 3um. Rtx-1301 (G43) Column, fused silica, Length: 30M, ID: 0.53mm, Df: 3um, low- to midpolarity phase, General-purpose columns for residual solvents, alcohols, oxygenates, and volatile organic compounds. Equivalent to USP G43 phase. Similar Phase(s): DB-1301

Rt-YDEXsa Column 0.25um. Rt-YDEXsa Column, fused silica, For HP 6850 GCs, Length: 30M, ID: 0.25mm, Df: 0.25um, 2,3-di-acetoxy-6-O-tert-butyl dimethylsilyl gamma cyclodextrin added into 14% cyanopropylphenyl/86% dimethyl polysiloxane, Temperature Limits: 40 to 230 deg C

Rt-YDEXsa Column 0.25um. Rt-YDEXsa Column, fused silica, For HP 6850 GCs, Length: 30M, ID: 0.32mm, Df: 0.25um, 2,3-di-acetoxy-6-O-tert-butyl dimethylsilyl gamma cyclodextrin added into 14% cyanopropylphenyl/86% dimethyl polysiloxane, Temperature Limits: 40 to 230 deg C

Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines, fused silica, Length: 10M, ID: 53mm, Tested with a comprehensive test mix, to ensure high inertness. Maximum temperature: 325 deg C.

Hydroguard Water-Resistant Guard/Retention Gap Columns/Transfer Lines, fused silica, Length: 10M, ID: 25mm, Tested with a comprehensive test mix, to ensure high inertness. Maximum temperature: 325 deg C.

Siltek-Deactivated Guard/Retention Gap Columns/Transfer Lines, fused silica, Length: 5M, ID: 0.53mm, Tested with a comprehensive test mix, to ensure high inertness. 380 deg C. Revolutionary deactivation process for superior inertness.

Siltek-Deactivated Guard/Retention Gap Columns/Transfer Lines, fused silica, Length: 5M, ID: 0.25mm, Tested with a comprehensive test mix, to ensure high inertness. 380 deg C. Revolutionary deactivation process for superior inertness.

Siltek-Deactivated Guard/Retention Gap Columns/Transfer Lines, fused silica, Length: 10M, ID: 0.32mm, Tested with a comprehensive test mix, to ensure high inertness. 380deg C. Revolutionary deactivation process for superior inertness.

Siltek-Deactivated Guard/Retention Gap Columns/Transfer Lines, fused silica, Length: 10M, ID: 0.25mm, Tested with a comprehensive test mix, to ensure high inertness. 380deg C. Revolutionary deactivation process for superior inertness.

Rtx-35 Column 0.50um. Rtx-35 Column, fused silica, with 5m Integra-Guard, Length: 30M, ID: 0.32mm, Df: 0.50um, midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, General-purpose columns for organochlorine pesticides, PCB congeners, herbicides, pharmaceuticals, sterols

Rtx-5 (G27) Column 0.25um. Rtx-5 (G27) Column, fused silica, with 30m Integra-Guard, Length: 15M, ID: 0.32mm, Df: 0.25um, fused silica, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Equivalent to USP G27 and G36 phases. General-purpose columns for drugs, solvent impurities

Rtx-5 (G27) Column 0.25um. Rtx-5 (G27) Column, fused silica, with 30m Integra-Guard, Length: 15M, ID: 0.25mm, Df: 0.25um, fused silica, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Equivalent to USP G27 and G36 phases. General-purpose columns for drugs, solvent impurities

Rtx-5 (G27) Column 0.25um. Rtx-5 (G27) Column, fused silica, with 10m Integra-Guard, Length: 15M, ID: 0.25mm, Df: 0.25um, fused silica, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Equivalent to USP G27 and G36 phases. General-purpose columns for drugs, solvent impurities

Rtx-5 (G27) Column. Rtx-5 (G27) Column, fused silica, Length: 30M, ID: 0.32mm, Df: 0.25um, fused silica, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Equivalent to USP G27 and G36 phases. General-purpose columns for drugs, solvent impurities, Similar Phase(s): HP-5, DB-5

Rtx-1 Column 3um. Rtx-1 Column, fused silica, Guard, Length: 15m, ID: 0.53mm, Df: 3um, nonpolar phase; Crossbond dimethyl polysiloxane, General-purpose columns for solvent impurities, PCB congeners, simulated distillation, arson accelerants, gases, natural gas odorants, sulfur compounds

Rtx-624 Column 1.40um. Rtx-624 Column, fused silica, Integra-Guard, low- to midpolarity phase, Length: 30M, ID: 0.25mm, Df: 1.40um, Application-specific columns for volatile organic pollutants. Recommended in U.S. EPA methods for volatile organic pollutants. Temperature: -20 deg C to 240 deg C.

Rtx-35 Column 0.25um. Rtx-35 Column, fused silica, with 5m Integra-Guard, Length: 30M, ID: 0.25mm, Df: 0.25um, midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, General-purpose columns for organochlorine pesticides, PCB congeners, herbicides, pharmaceuticals, sterols

Rtx-624 Column 1.40um. Rtx-624 Column, fused silica, with 5m Integra-Guard, low- to midpolarity phase, Length: 30M, ID: 0.25mm, Df: 1.40um, Application-specific columns for volatile organic pollutants. Recommended in U.S. EPA methods for volatile organic pollutants. -20 deg C to 240 deg C.

Rtx-35 Column 0.25um. Rtx-35 Column, fused silica, with 10m Integra-Guard, Length: 30M, ID: 0.25mm, Df: 0.25um, midpolarity phase; Crossbond diphenyl dimethyl polysiloxane, General-purpose columns for organochlorine pesticides, PCB congeners, herbicides, pharmaceuticals, sterols

Rtx-BAC1 Column 1.80um. Rtx-BAC1 Column, fused silica, proprietary Crossbond phase, Length: 30M, ID: 0.32MM, Df: 1.80UM, for abused inhalant anesthetics, Y-hydroxybutyrate (GHB)/Y-butyrolactone (GBL), glycols, and common industrial solvents. Stable to 260 deg C. Similar Phase: DB-ALC1, DB-ALC2

Rtx-5MS-Low-Bleed GC-MS Column, 10m Integra-Guard, Length: 30M, ID: 0.25mm, Df: 0.25um, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, General purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners essential oils

Rtx-5MS-Low-Bleed GC-MS Column, 5m Integra-Guard, Length: 5M, ID: 0.25mm, Df: 0.25um, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, General purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners essential oils

Rtx-5MS-Low-Bleed GC-MS Column, 10m Integra-Guard, Length: 30M, ID: 0.25mm, Df: 1um, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, General purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners essential oils

Rtx-5MS-Low-Bleed GC-MS Column, 10m Integra-Guard, Length: 30M, ID: 0.32mm, Df: 0.25um, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, General purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners essential oils

Rtx-1701 Column 1um. Rtx-1701 Column, fused silica, Length: 30m, 0.32mm ID, Df: 1.00um, midpolarity Crossbond phase, General-purpose columns for alcohols, oxygenates, PCB congeners, pesticides, and fragrance compounds. Equivalent to USP G46 phase. Similar Phase(s): DB-1701P, DB-1701

Rtx-2887 Column 2.65um. Rtx-2887 Column, fused silica, with 5m Integra-Guard, Length: 10M, ID: 0.53mm, Df: 2.65um, nonpolar phase; Crossbond 100% dimethyl polysiloxane-for simulated distillation, Application-specific column for simulated distillation. Stable to 360 deg C.

Rtx-2887 Column 2.65um. Rtx-2887 Column, fused silica, with 10m Integra-Guard, Length: 10M, ID: 0.53mm, Df: 2.65um, nonpolar phase; Crossbond 100% dimethyl polysiloxane-for simulated distillation, Application-specific column for simulated distillation. Stable to 360 deg C. Similar Phase: DB-2887

Stabilwax Column 1um. Stabilwax Column, fused silica, with 5m Integra-Guard, Length: 15m, ID: 0.53mm, Df: 1um, For HP 6850 GCs, polar phase; Crossbond polyethylene glycol, Rugged enough to with stand repeated water injections. Temperature range: 40 deg C to 260 deg C.

Stabilwax Column 0.50um. Stabilwax Column, fused silica, with 5m Integra-Guard, Length: 60m, ID: 0.25mm, Df: 0.50um, For HP 6850 GCs, polar phase; Crossbond polyethylene glycol, Rugged enough to with stand repeated water injections. Temperature range: 40 deg C to 260 deg C.

Stabilwax Column 1um. Stabilwax Column, fused silica, with 5m Integra-Guard, Length: 30m, ID: 0.53mm, Df: 1um, For HP 6850 GCs, polar phase; Crossbond polyethylene glycol, Rugged enough to with stand repeated water injections. Temperature range: 40 deg C to 260 deg C.

Stabilwax Column 1um. Stabilwax Column, fused silica, with 5m Integra-Guard, Length: 30m, ID: 0.32mm, Df: 1um, For HP 6850 GCs, polar phase; Crossbond polyethylene glycol, Rugged enough to with stand repeated water injections. Temperature range: 40 deg C to 260 deg C.

Stabilwax Column 0.50um. Stabilwax Column, fused silica, with 5m Integra-Guard, Length: 30m, ID: 0.32mm, Df: 0.50um, For HP 6850 GCs, polar phase; Crossbond polyethylene glycol, Rugged enough to with stand repeated water injections. Temperature range: 40 deg C to 260 deg C.

Stabilwax Column 0.50um. Stabilwax Column, fused silica, with 5m Integra-Guard, Length: 30m, ID: 0.25mm, Df: 0.50um, For HP 6850 GCs, polar phase; Crossbond polyethylene glycol, Rugged enough to with stand repeated water injections. Temperature range: 40 deg C to 260 deg C.

Stabilwax Column 0.25um. Stabilwax Column, fused silica, with 5m Integra-Guard, Length: 30m, ID: 0.32mm, Df: 0.25um, For HP 6850 GCs, polar phase; Crossbond polyethylene glycol, Rugged enough to with stand repeated water injections. Temperature range: 40 deg C to 260 deg C.

Stabilwax Column 1um. Stabilwax Column, fused silica, with 10m Integra-Guard, Length: 60m, ID: 0.53mm, Df: 1um, For HP 6850 GCs, polar phase; Crossbond polyethylene glycol, Rugged enough to with stand repeated water injections. Temperature range: 40 deg C to 260 deg C.

Stabilwax Column 0.50um. Stabilwax Column, fused silica, with 10m Integra-Guard, Length: 30m, ID: 0.25mm, Df: 0.50um, For HP 6850 GCs, polar phase; Crossbond polyethylene glycol, Rugged enough to with stand repeated water injections. Temperature range: 40 deg C to 260 deg C.

Stabilwax Column 0.25um. Stabilwax Column, fused silica, with 10m Integra-Guard, Length: 30m, ID: 0.32mm, Df: 0.25um, For HP 6850 GCs, polar phase; Crossbond polyethylene glycol, Rugged enough to with stand repeated water injections. Temperature range: 40 deg C to 260 deg C.

MXT-1701 Column 0.25um. MXT-1701 Column, Siltek-treated stainless steel, Length: 30M, ID: 0.25mm, Df: 0.25um, 6in Config. For MXT columns without Cage, General-purpose columns for alcohols, oxygenates, PCB congeners and pesticides. 4.5in standard coil diameter. Similar Phase(s): DB-PS1701

MXT-502.2 Column 3um. MXT-502.2 Column, Length: 30m, ID: 0.28mm, Df: 1.60um, proprietary Crossbond diphenyl/dimethyl polysiloxane phase, Application-specific columns with unique selectivity for volatile organic pollutants, Temperature range: -20 deg C to 320 deg C.

Rt-Q-BOND Column 10um. Rt-Q-BOND Column, Length: 30m, 0.25mm ID, Df: 8um, Nonpolar PLOT column incorporating 100% divinylbenzene. High retention for CO2 simplifies gas analysis; CO2 and methane separated from O2/N2/CO, for analysis of oxygenated compounds and solvents. Temperature of 300 deg C

MXT-Volatiles Capillary Column 2um. MXT-Volatiles Capillary Column, Length: 105m, 0.53mm ID, Df: 2.00um, 4 1/2inID coil banded with copper wire

Rtx-225 cap GC Column 15m. Rtx-225 cap GC Column, Length: 15m, ID: 0.25mm, df: 0.25um, Excellent separation of trihalomethanes; ideal polarity for light hydrocarbons and aromatics, Application-specific columns with unique selectivity for volatile organic pollutants, Stable to 270 deg C

Rtx-502.2 cap GC Column 60m. Rtx-502.2 cap GC Column, Length: 60m, ID: 0.53mm, df: 3.00um, Excellent separation of trihalomethanes; ideal polarity for light hydrocarbons and aromatics, Application-specific columns with unique selectivity for volatile organic pollutants, Stable to 270 deg C

Hydroguard Column 5m. Hydroguard Water-Resistant Guard, Length: 5m, ID: 0.25mm, Tested with a comprehensive test mix, to ensure high inertness, Maximum temperature: 325 deg C, Extend analytical column lifetime by preventing degradation from harsh steam-cleaning water injections

Innovative Integra-Guard Column 30 m. Innovative Integra-Guard Column Rtx-5/Rtx-G27, Inner Diameter: 0.53 mm, Length: 30 m, df: 5.00 um, Modification: with 5 m Integra-Guard Column, General-purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners

Rtx-5 PONA Tuning GC Column 5m. Rtx-5 PONA Tuning GC Column, Length: 5m, Inner Diameter: 0.25mm, df: 1.0umRtx-5 PONA Tuning, Excellent separation of trihalomethanes; ideal polarity for light hydrocarbons and aromatics, with unique selectivity for volatile organic pollutants, Stable to 270 deg C

Hydroguard Column 5m. Hydroguard Water-Resistant Guard, Length: 5m, ID: 0.53mm, Tested with a comprehensive test mix, to ensure high inertness, Maximum temperature: 325 deg C, Extend analytical column lifetime by preventing degradation from harsh steam-cleaning water injections

Rtx-35 Amine capillary GC Column 15m. Rtx-35 Amine capillary GC Column, Length: 15m, ID: 0.32mm, df: 1.5um, Excellent separation of trihalomethanes; ideal polarity for light hydrocarbons and aromatics, Application-specific columns with unique selectivity for volatile pollutant, Stable to 270 deg C

Rtx-35 Amine cap GC Column 30m. Rtx-35 Amine cap GC Column, Length: 30m, ID: 0.25mm, df: 0.5um, Excellent separation of trihalomethanes; ideal polarity for light hydrocarbons and aromatics, Application-specific columns with unique selectivity for volatile organic pollutants, Stable to 270 deg C

Chiral cap GC Column 30m. Chiral cap GC Column, Length: 30m, ID: 0.32mm, df: 0.25um, Proprietary cyclodextrin material added into 14% cyanopropylphenyl/86% dimethyl polysiloxane, Uses: Proprietary stationary phase, developed specifically for the fragrance industry

Chiral cap GC Column 30m. Chiral cap GC Column, Length: 30m, ID: 0.32mm, df: 0.25um, Proprietary cyclodextrin material added into 14% cyanopropylphenyl/86% dimethyl polysiloxane, Uses: Proprietary stationary phase, developed specifically for the fragrance industry

Molecular sieve Packed Column 3 ft. Molecular sieve Packed Column Molesieve, Pore Size: 5A, Inner Diameter: 2.1 mm, Length: 3 ft, Material: Stainless Steel Tubing, Mesh: 80/100, Configuration: General, easily separate permanent gases at above-ambient temperatures

Molesieve Varian 3800Packed Column 10ft. Molesieve Varian 3800Packed Column, Length: 10ft, Pore Size: 5A, Mesh: 80/100, Material: Stainless Steel, easily separate permanent gases at above-ambient temperatures, preactivated, with metal end-fittings to prevent water or carbon dioxide

Molecular sieve Packed Column 10 ft. Molecular sieve Packed Column Molesieve, Pore Size: 5A, Inner Diameter: 2.1 mm, Length: 10 ft, Material: Stainless Steel Tubing, Mesh: 80/100, Configuration: Agilent, easily separate permanent gases at above-ambient temperatures

Molesieve NOC Packed Column 10ft. Molesieve NOC Packed Column, Length: 10ft, ID: 2.1mm, Pore Size: 5A, Mesh: 80/100, Material: Stainless Steel, easily separate permanent gases at above-ambient temperatures, preactivated and ready to use, with metal end-fittings to prevent water or carbon dioxide

Molecular sieve Packed Column 10 ft. Molecular sieve Packed Column Molesieve, Pore Size: 5A, Inner Diameter: 2.1 mm, Length: 10 ft, Material: Stainless Steel Tubing, Mesh: 80/100, Configuration: General, easily separate permanent gases at above-ambient temperatures

CarboBlack Column 8 ft. CarboBlack Column 1% Rt-1000, Inner Diameter: 2.1 mm, Length: 8 ft, Material: Stainless Steel Tubing, Mesh: 60/80, Configuration: Agilent, Graphitized carbon black, CarboBlack B support, with higher surface area, can hold up to a 10% loading of a nonsilicone liquid phase

CarboBlack Column 8 ft. CarboBlack Column 1% Rt-1000, Inner Diameter: 2.1 mm, Length: 8 ft, Material: Stainless Steel Tubing, Mesh: 60/80, Configuration: General, Graphitized carbon black, CarboBlack B support, with higher surface area, can hold up to a 10% loading of a nonsilicone liquid phase

CarboBlack Column 6 ft. CarboBlack Column 5% Carbowax 20M, Inner Diameter: 2.1 mm, Outer diameter: 1/8in, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 60/80, Configuration: HP, with its higher surface area, can hold up to a 10% loading of a nonsilicone liquid phase, provide resolution

CarboBlack Column 6 ft. CarboBlack Column 5% Carbowax 20M, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 60/80, Configuration: General, with its higher surface area, can hold up to a 10% loading of a nonsilicone liquid phase, provide resolution and retention

Micropacked GC Column 6ft. Micropacked GC Column, HAYESEP T, Length: 6ft, Outer diameter: 1/8in, Silco NOC, Mesh: 80/100, Configuration: Analytical controls, Higher capacity than PLOT, Made from inert, flexible SilcoSmooth tubing, Standard coils fit all instruments, Increased efficiency

Chromosorb Diatomaceous Earth Column 3 ft. Chromosorb Diatomaceous Earth Column 10% TCEP, Inner Diameter: 2.1 mm, Length: 3 ft, Material: Stainless Steel Tubing, Mesh: 60/80 Chromosorb PAW, Silco, Configuration: Analytical, non-bonded stationary phase packed, NOC

Refinery Gas Column 2ft. Refinery Gas Column 2.1%, phase: 2abc, Carbowax 1540 Porasil C (backflush column), Inner Diameter: 2.0 mm, Length: 2ft, Configuration: Analytical Controls Configuration, finely tuned to resolve light hydrocarbons, elute C5+ hydrocarbons ahead of C1 through C4 hydrocarbon

Refinery Gas Column Set (3 set), phase: 2abc, Configuration: Analytical Controls Configuration, finely tuned to resolve light hydrocarbons, will elute C5+ hydrocarbons ahead of C1 through C4 hydrocarbons

ShinCarbon ST Column 2 m. ShinCarbon ST Column ShinCarbon ST Packed Column, Inner Diameter: 2 mm, Outer diameter: 1/8in, Length: 2 m, Mesh: 80/100, Separate permanent gases, including carbon monoxide and carbon dioxide,Maximum temperature: 280 deg C/300 deg C, Shimadzu 8A

ShinCarbon ST Column 2 m. ShinCarbon ST Column ShinCarbon ST Packed Column, Inner Diameter: 2 mm, Length: 2 m, Outer diameter: 1/8inch, Mesh: 80/100, Configuration: PE Auto Sys, Separate permanent gases, including carbon monoxide and carbon dioxide, Maximum temperature: 280 deg C/300 deg C

ShinCarbon ST Column 2 m. ShinCarbon ST Column ShinCarbon ST Packed Column, Inner Diameter: 2 mm, Length: 2 m, Outer diameter: 1/8inch, Mesh: 80/100, Configuration: Varion 3800, Separate permanent gases, including carbon monoxide and carbon dioxide, Maximum temperature: 280 deg C/300 deg C

ShinCarbon ST Column 2 m. ShinCarbon ST Column ShinCarbon ST Packed Column, Inner Diameter: 2 mm, Length: 2 m, Outer diameter: 1/8inch, Mesh: 80/100, Configuration: Varian, Separate permanent gases, including carbon monoxide and carbon dioxide, Maximum temperature: 280 deg C/300 deg C

ShinCarbon ST Column 2 m. ShinCarbon ST Column ShinCarbon ST Packed Column, Inner Diameter: 2 mm, Length: 2 m, Outer diameter: 1/8inch, Mesh: 80/100, Configuration: General, Separate permanent gases, including carbon monoxide and carbon dioxide, Maximum temperature: 280 deg C/300 deg C

Rt-XL Sulfur Column 2 m. Rt-XL Sulfur Packed Column, Inner Diameter: 2 mm, Length: 2 m, Outer diameter: 1/8inch, Configuration: Agilent, packed and micropacked, Optimized for low ppbv sulfur analyses, Sulfinert treated for maximum inertness, Maximum temperature: 290 deg C

Rt-XL Sulfur Column 2 m. Rt-XL Sulfur Packed Column, Inner Diameter: 2 mm, Length: 2 m, Outer diameter: 1/8inch, Configuration: General, packed and micropacked, Optimized for low ppbv sulfur analyses, Sulfinert treated for maximum inertness, Maximum temperature: 290 deg C

Rt-XL Sulfur Column 1 m. Rt-XL Sulfur Packed Column, Inner Diameter: 2 mm, Length: 1 m, Outer diameter: 1/8inch, Configuration: Agilent, packed and micropacked, Optimized for low ppbv sulfur analyses, Sulfinert treated for maximum inertness, Maximum temperature: 290 deg C

Rt-XL Sulfur Column 1 m. Rt-XL Sulfur Packed Column, Inner Diameter: 2 mm, Length: 1 m, Outer diameter: 1/8inch, packed and micropacked, Optimized for low ppbv sulfur analyses, Sulfinert treated for maximum inertness, Maximum temperature: 290 deg C, without Ferrules and Nuts, Installation Kits

Rt-XL Sulfur Column 1 m. Rt-XL Sulfur Packed Column, Inner Diameter: 2 mm, Length: 1 m, Outer diameter: 1/8inch, Configuration: General, packed and micropacked, Optimized for low ppbv sulfur analyses, Sulfinert treated for maximum inertness, Maximum temperature: 290 deg C

Molecular sieve Packed Column 2 m. Molecular sieve Packed Column Molesieve 13X, Inner Diameter: 2.0 mm, Length: 2 m, Material: SilcoSmooth Tubing, Mesh: 60/80, Configuration: General, easily separate permanent gases at above-ambient temperatures, with metal end-fittings

Molecular sieve Packed Column 6 ft. Molecular sieve Packed Column Molesieve 13X, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 80/100, Configuration: Varian, easily separate permanent gases at above-ambient temperatures, with metal end-fittings

Molecular sieve Packed Column 6 ft. Molecular sieve Packed Column Molesieve 13X, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 80/100, Configuration: General, easily separate permanent gases at above-ambient temperatures, with metal end-fittings

Molecular sieve Packed Column 6 ft. Molecular sieve Packed Column Molesieve 13X, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 60/80, Configuration: Varian, easily separate permanent gases at above-ambient temperatures, with metal end-fittings

Molecular sieve Packed Column 6 ft. Molecular sieve Packed Column Molesieve 13X, Inner Diameter: 2.1 mm, Outer diameter: 1/8in, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 60/80, easily separate permanent gases at above-ambient temperatures, with metal end-fittings, NOC

Molecular sieve Packed Column 6 ft. Molecular sieve Packed Column Molesieve 13X, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 60/80, Configuration: General, easily separate permanent gases at above-ambient temperatures, with metal end-fittings

Molecular sieve Packed Column 6 ft. Molecular sieve Packed Column Molesieve, Pore Size: 5A, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 80/100, Configuration: PE Auto Sys, easily separate permanent gases at above-ambient temperatures

Molecular sieve Packed Column 6 ft. Molecular sieve Packed Column Molesieve, Pore Size: 5A, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 80/100, Configuration: General, easily separate permanent gases at above-ambient temperatures, NOC

Molecular sieve Packed Column 6 ft. Molecular sieve Packed Column Molesieve, Pore Size: 5A, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 80/100, Configuration: General, easily separate permanent gases at above-ambient temperatures, NOC

Molecular sieve Packed Column 6 ft. Molecular sieve Packed Column Molesieve, Pore Size: 5A, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 80/100, Configuration: General, easily separate permanent gases at above-ambient temperatures

Porous Polymer Column 6 ft. Porous Polymer Column Porapak R, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Siltek treated stainless steel Tubing, Mesh: 80/100-, Configuration: General, for analyses of volatile compounds and light solvents.

Porous Polymer Column 6 ft. Porous Polymer Column Porapak QS, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Siltek treated stainless steel Tubing, Mesh: 80/100-, Configuration: Agilent, for analyses of volatile compounds and light solvents

Porous Polymer Column 6 ft. Porous Polymer Column Porapak QS, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Siltek treated stainless steel Tubing, Mesh: 80/100-, Configuration: General, for analyses of volatile compounds and light solvents

Porous Polymer Column 6ft. Porous Polymer Porapak Q Packed Column, Length: 6ft, Inner Diameter: 2mm, Mesh: 80/100, Material: Stainless steel Porapak Q, for analyses of volatile compounds and light solvents, SRI 8610C

Porous Polymer Column 6ft. Porous Polymer Packed Column, Length: 6ft, Mesh: 80/100, Material: Stainless steel PE, NOC, for analyses of volatile compounds and light solvents

Porous Polymer Column 6 ft. Porous Polymer Column Porapak Q, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Siltek treated stainless steel Tubing, Mesh: 80/100-, Configuration: PE Auto Sys, for analyses of volatile compounds and light solvents

Porous Polymer Column 6 ft. Porous Polymer Column Porapak Q, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Siltek treated stainless steel Tubing, Mesh: 80/100-, Configuration: Agilent, for analyses of volatile compounds and light solvents

Porapak Q Packed Column 6ft. Porapak Q Packed Column, Length: 6ft, Inner Diameter: 2mm, Mesh: 80/100, Material: Stainless steel, NOC Precondition, for analyses of volatile compounds and light solvents

Porous Polymer Column 6 ft. Porous Polymer Column Porapak Q, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Siltek treated stainless steel Tubing, Mesh: 80/100-, Configuration: General, for analyses of volatile compounds and light solvents

Porous Polymer 6ft. Porous Polymer Hayesep Q Packed Column, Length: 6ft, Inner Diameter: 2mm, Mesh: 80/100, Material: Stainless steel, NOC, for analyses of volatile compounds and light solvents

Porous Polymer Column 6 ft. Porous Polymer Column HayeSep Q, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 80/100-, Configuration: PE Auto Sys, for analyses of volatile compounds and light solvents

Porous Polymer Column 6 ft. Porous Polymer Column HayeSep Q, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Mesh: 80/100-, Configuration: General, for analyses of volatile compounds and light solvents

Chromosorb Diatomaceous Earth Column 8 ft. Chromosorb Diatomaceous Earth Column 10% TCEP, Inner Diameter: 2.1 mm, Length: 8 ft, Material: Stainless Steel Tubing, 100/120 Chromosorb PAW, Configuration: General, non-bonded stationary phase packed

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Column 5% Rtx-Stabilwax, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Configuration: General, bonded stationary phase packed, Low bleed levels, Longer column lifetimes, Short conditioning times

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Column 20% Rtx-1, Inner Diameter: 2.1 mm, Length: 6 ft, OD: 1/8in, Material: Stainless Steel Tubing, Mesh: 100/120 Silcoport W, bonded stationary phase, Low bleed levels, Longer column lifetimes, Short times, Shimadzu 8A

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Column 20% Rtx-1, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Configuration: Agilent, bonded stationary phase packed, Low bleed levels, Longer column lifetimes, Short conditioning times

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Column 20% Rtx-1, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Configuration: General, bonded stationary phase packed, Low bleed levels, Longer column lifetimes, Short conditioning times

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Column 10% Rtx-1, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Configuration: PE Auto Sys, bonded stationary phase packed, Low bleed levels, Longer column lifetimes, Short conditioning times

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Column 10% Rtx-1, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Configuration: Agilent, bonded stationary phase packed, Low bleed levels, Longer column lifetimes, Short conditioning times

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Column 10% Rtx-1, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Configuration: General, bonded stationary phase Packed Columns, Low bleed levels, Longer column lifetimes, Short conditioning times

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Column 3% Rtx-1, Inner Diameter: 2.1 mm, Length: 6 ft, Material: Stainless Steel Tubing, Configuration: General, bonded stationary phase packed, Low bleed levels, Longer column lifetimes, Short conditioning times

Molecular sieve Packed Column 1 m. Molecular sieve Packed Column Molesieve, Pore Size: 5A, Inner Diameter: 2.0 mm, Length: 1 m, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: Agilent, easily separate permanent gases at above-ambient temperatures

Molecular sieve Packed Column 1 m. Molecular sieve Packed Column Molesieve, Pore Size: 5A, Inner Diameter: 2.0 mm, Length: 1 m, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: General, easily separate permanent gases at above-ambient temperatures

Molecular sieve Packed Column 2 m. Molecular sieve Packed Column Molesieve 13X, Inner Diameter: 2.0 mm, Length: 2 m, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: Agilent, easily separate permanent gases at above-ambient temperatures, with metal end-fittings

Molecular sieve Packed Column 2 m. Molecular sieve Packed Column Molesieve 13X, Inner Diameter: 2.0 mm, Length: 2 m, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: General, easily separate permanent gases at above-ambient temperatures, with metal end-fittings

OPN on Res-Sil C packed Column 12ft. OPN on Res-Sil C packed Column, Inner Diameter: 2 mm, Length: 12', OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: Agilent, Faster separations of C1 to C4 hydrocarbons, for Unsaturated Light Hydrocarbon, replaces Porasil materials

OPN on Res-Sil C Column 2 mmx1/8in. OPN on Res-Sil C Column (packed), Inner Diameter: 2 mm, Length: 12', Outer Diameter: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: General, separates the light hydrocarbons, and baseline resolves cis-2-butene from 1,3-butadiene

N-Octane on Res-Sil C packed Column 20ft. N-Octane on Res-Sil C packed Column, Inner Diameter: 2 mm, Length: 20 ft, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: General, Faster separations of C1 to C4 hydrocarbons, for Unsaturated Light Hydrocarbon, replaces Porasil

Porous Polymer packed Column 2 m. Porous Polymer packed Column, HayeSep Q, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: PE Autosys, includes HayeSep and Porapak polymers for analyses of volatile compounds and light solvents, Siltek treated SS

Porous Polymer packed Column 2 m. Porous Polymer packed Column, HayeSep Q, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Varian 3700, Vista Series, FID, includes HayeSep and Porapak polymers for analyses of volatile compounds and light solvents, Siltek treated SS

Porous Polymer packed Column 2 m. Porous Polymer packed Column, HayeSep Q, ID: 2mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: Agilent (HP), includes HayeSep/Porapak polymers for analyses of volatile compounds/light solvents, Siltek treated SS, Not on Column

Porous Polymer packed Column 2 m. Porous Polymer packed Column, HayeSep Q, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: Agilent (HP), includes HayeSep and Porapak polymers for analyses of volatile compounds and light solvents, Siltek treated SS

Porous Polymer packed Column 2 m. Porous Polymer packed Column, HayeSep Q, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: General, includes HayeSep and Porapak polymers for analyses of volatile compounds and light solvents, Siltek treated SS

Molecular Sieve packed Column 3.05m. Molecular Sieve packed Column, Molesieve 5A, Inner Diameter: 2mm, Length: 3.05m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: PE Autosys, separate permanent gases at above-ambient temperature, with metal end-fittings, Not on column

Molecular Sieve packed Column 3.05m. Molecular Sieve packed Column, Molesieve 5A, ID: 2mm, Length: 3.05m, Outer Diameter: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: Agilent (HP), separate permanent gases at above-ambient temperature, with metal end-fitting Not on column

Molecular Sieve packed Column 3.05m. Molecular Sieve packed Column, Molesieve 5A, Inner Diameter: 2mm, Length: 3.05m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: Agilent (HP), separate permanent gases at above-ambient temperature, with metal end-fittings to prevent water

Molecular Sieve packed Column 3.05m. Molecular Sieve packed Column, Molesieve 5A, ID: 2mm, Length: 3.05m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: General, separate permanent gases at above-ambient temperature, with metal end-fittings to prevent water, Not on column

Molecular Sieve packed Column 3.05m. Molecular Sieve packed Column, Molesieve 5A, ID: 2mm, Length: 3.05m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: General, separate permanent gases at above-ambient temperature, with metal end-fittings to prevent water or carbon dioxide

Molecular Sieve packed Column 2m. Molecular Sieve packed Column, Molesieve 5A, Inner Diameter: 2mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, for SRI 8610C, separate permanent gases at above-ambient temperature, with metal end-fittings to prevent water or carbon dioxide

Molecular Sieve packed Column 2m. Molecular Sieve packed Column, Molesieve 5A, ID: 2mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: PE Autosys, separate permanent gases at above-ambient temperature, with metal end-fittings to prevent water or carbon dioxide

Molecular Sieve packed Column 2m. Molecular Sieve packed Column, Molesieve 5A, ID: 2mm, Length: 2m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Varian 3700, Vista Series, FID, separate permanent gases at above-ambient temperature, with metal end-fittings to prevent water or carbon dioxide

Molecular Sieve packed Column 2 m. Molecular Sieve packed Column, Molesieve 5A, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: Agilent (HP), separate permanent gases at above-ambient temperature, with metal end-fittings to prevent water/carbon dioxide

Molecular Sieve packed Column 2 m. Molecular Sieve packed Column, Molesieve 5A, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: General, separate permanent gases at above-ambient temperature, with metal end-fittings to prevent water or carbon dioxide

Molecular Sieve packed Column 2 m. Molecular Sieve packed Column, Molesieve 5A, Inner Diameter: 2.0 mm, Length: 2 m, Outer Diameter: 1/8in, Material: SilcoSmooth Tubing, Mesh: 60/80, Configuration: PE Autosys, separate permanent gases at above-ambient temperature, Siltek treated stainless steel

Molecular Sieve packed Column 2 m. Molecular Sieve packed Column, Molesieve 5A, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 60/80, Configuration: General, separate permanent gases at above-ambient temperature, with metal end-fittings to prevent water or carbon dioxide

Porapak Q Column 2mm x 1/8in. Porous Polymer Columns (packed) For Shimadzu 17A, Porapak Q, ID: 2mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Includes HayeSep and Porapak polymer packing for analyses of volatile compound/light solvent, with Siltek treated Stainless steel

Porapak Q Column 2mm x 1/8in. Porous Polymer Columns (packed) PE Autosys, Porapak Q, ID: 2mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Includes HayeSep and Porapak polymer packing for analyses of volatile compound/light solvent, with Siltek treated Stainless steel

Porous Polymer packed Column 2m. Porous Polymer packed Column, Porapak Q, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Varian 3700/Visa Series, FID, includes HayeSep and Porapaks for analyses of volatile compounds and light solvents, Siltek treated Stainless steel

Porapak Q Column 2mmx1/8in. Porous Polymer Columns (packed) NOT on Column - HP, Porapak Q, ID: 2mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Includes HayeSep and Porapak polymer packing for analyses of volatile compound/light solvent, with Siltek treated Stainless steel

Porapak Q Column 2mmx1/8in. Porous Polymer Columns (packed) HP pre condition Configuration, Porapak Q, ID: 2mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Includes HayeSep and Porapak polymer packing for analyses of volatile compound/light solvent, with Siltek treated SS

Porapak Q Column 2mmx1/8in. Porous Polymer Columns (packed) Agilent (HP) Configuration, Porapak Q, ID: 2mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Includes HayeSep and Porapak polymer packings for analyses of volatile compounds and light solvent, with Siltek treated SS

Porous Polymer packed Column 2m. Porous Polymer packed Column, Porapak Q, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: Agilent (HP), includes HayeSep/Porapaks for analyses of volatile compounds and light solvents, Siltek treated SS, Not on column

Porapak Q Column 2mmx1/8in. Porous Polymer Columns (packed) General Configuration, Porapak Q, ID: 2mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Includes HayeSep and Porapak polymer packings for analyses of volatile compounds and light solvent, with Siltek treated SS

Porous Polymer packed Column 2m. Porous Polymer packed Column, Porapak QS, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: General, includes HayeSep and Porapak polymer packings for analyses of volatile compounds and light solvents, Siltek treated SS

Porous Polymer packed Column 2m. Porous Polymer packed Column, Porapak R, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: General, includes HayeSep and Porapak polymer packings for analyses of volatile compounds and light solvents, Siltek treated SS

Chromosorb Diatomaceous Earth Column 2 m. Chromosorb Diatomaceous Earth Column (bonded stationary phase packed), 10% Rtx-1, ID: 2.0 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Tubing, Mesh: 100/120 Silcoport W, Configuration: Shimadzu 14A, Siltek treated stainless steel, Low bleed level

CarboBlack packed Column 1.8 mx 2.0 mm. CarboBlack packed Column 0.1% Rt-1000, ID: 2.0 mm, On CarboBlack C, Length: 1.8 m, Material: SilcoSmooth Tubing, Mesh: 80/100, Configuration: PE Autosys, CarboBlack C support can hold up to a 1% loading of a nonsilicone liquid phase, Siltek treated SS

CarboBlack packed Column 3.05 m. CarboBlack packed Column, 5% Krytox, ID: 2.1 mm, Length: 3.05 m, Material: Nickel 200 Tubing, Mesh: 60/80, ABB3100 4in Coil, On CarboBlack B, support, with its higher surface area, can hold up to a 10% loading of a nonsilicone liquid phase, Unique selectivity

CarboBlack packed Column 3.05 m. CarboBlack packed Column, 5% Krytox, ID: 2.1 mm, Length: 3.05 m, Material: Nickel 200 Tubing, Mesh: 60/80, On CarboBlack B, support, with its higher surface area, can hold up to a 10% loading of a nonsilicone liquid phase, Graphitized carbon black unique selectivity

CarboBlack Packed Column 2m. CarboBlack Packed Column, 5% Carbowax 20M, On CarboBlack B, ID: 2.0 mm, Length: 2 m, Material: SilcoSmooth Tubing, Mesh: 80/120, Configuration: Shimadzu 17A, CarboBlack B support, with its higher surface area, Hold 10% loading of a nonsilicone liquid phase

CarboBlack Packed Column 2m. CarboBlack Packed Column 5% Carbowax 20M, On CarboBlack B, Inner Diameter: 2.0 mm, Length: 2 m, Material: SilcoSmooth Tubing, Mesh: 80/120, Configuration: PE Auto Sys, CarboBlack B support, with its higher surface area, Hold 10% loading of a nonsilicone liquid phase

Tenax TA, Packing Material, Mesh: 35/60, Temperature Limits: 350 deg C, Size: 10 grams.

Tenax TA, Packing Material, Mesh: 20/35, Temperature Limits: 350 deg C, Size: 10 grams.

HayeSep T, Packing Material, Mesh: 60/80, Temperature Limits: 165 deg C, 24 gram bottle.

HayeSep S, Packing Material, Mesh: 60/80, Temperature Limits: 250 deg C, 24 gram bottle.

HayeSep Q, Packing Material, Mesh: 60/80, Temperature Limits: 275 deg C, 24 gram bottle.

HayeSep P, Packing Material, Mesh: 60/80, Temperature Limits: 250 deg C, 24 gram bottle.

HayeSep N, Packing Material, Mesh: 60/80, Temperature Limits: 165 deg C, 24 gram bottle.

HayeSep DB, Packing Material, Mesh: 100/120, Temperature Limits: 290 deg C, 24 gram bottle.

HayeSep DB, Packing Material, Mesh: 80/100, Temperature Limits: 290 deg C, 24 gram bottle.

HayeSep D, Packing Material, Mesh: 60/80, Temperature Limits: 290 deg C, 24 gram bottle.

Tenax -GR Packing Material, Mesh: 60/80, Temperature Limits: 350 deg C, Size: 10 gram.

Tenax -TA Packing Material, Mesh: 80/100, Temperature Limits: 350 deg C, Size: 10 gram.

Tenax -TA Packing Material, Mesh: 60/80, Temperature Limits: 350 deg C, Size: 10 gram.

CarboBlack Packing Material 10 g. CarboBlack Packing Material, 0.19% picric acid on CarboBlack C, supports up to 1% loading of a nonsilicone liquid phase, Mesh: 80/100, Temperature: 120 C, with adsorption for alcohol analyses, treated with KOH or picric acid for basic or acidic compound, Size: 10 g

CarboBlack Packing Material 10 g. CarboBlack Packing Material, 6.6% Carbowax 20m on CarboBlack B, Mesh: 80/120, Temperature Limits: 225 deg C, CarboBlack B supports up to 10% loading of a nonsilicone liquid phase, CarboBlack C supports up to 1% loading of a nonsilicone liquid phase, Size: 10 g

CarboBlack Packing Material 10 g. CarboBlack Packing Material, 5% Carbowax 20m on CarboBlack B, supports up to 10% loading of a nonsilicone liquid phase, Mesh: 80/120, Temperature: 225 C, with adsorption for alcohol analyses, treated with KOH or picric acid for basic or acidic compound, Size: 10 g

CarboBlack C Packing Material 10 g. CarboBlack B Packing Material, Mesh: 80/120, Temperature: 500 deg C, supports up to 1% loading of a nonsilicone liquid phase, with unique selectivity/little adsorption for alcohol analyses, treated with KOH or picric acid for basic or acidic compound, Size: 10 g

CarboBlack C Packing Material 10 g. CarboBlack B Packing Material, Mesh: 60/80, Temperature: 500 deg C, supports up to 1% loading of a nonsilicone liquid phase, with unique selectivity/little adsorption for alcohol analyses, treated with KOH or picric acid for basic or acidic compound, Size: 10 g

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Column (non-bonded stationary phase packed), 3% Rt-101, Inner Diameter: 2.1 mm, Outer Diameter: 1/8in, Mesh: 100/120 Silcoport W, Length: 6ft, Material: Stainless Steel Tubing, General Configuration, Siltek treated SS

CarboBlack packed Column 6 ft. CarboBlack packed Column, 6.6% Carbowax 20M, HP, Inner Diameter: 2.1 mm, Length: 6 ft, Outer Diameter: 1/8in, Material: Stainless Steel Tubing, Mesh: 80/120, Configuration: General, Graphitized carbon black offers unique selectivity adsorption for alcohol analyses

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Columns (bonded stationary phase packed Column), for Shimadzu 8A, ID: 2 mm, Length: 6 ft, OD: 1/8in, Material: Stainless Steel Tubing, Mesh: 100/120 Silcoport Chromosorb W, Configuration: Agilent, with Low bleed level

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Columns (bonded stationary phase packed Column), 20% Rtx-Stabilwax, ID: 2.1 mm, Length: 6 ft, OD: 1/8in, Material: Stainless Steel Tubing, Mesh: 100/120 Silcoport Chromosorb W, Configuration: Agilent, with Low bleed level

Chromosorb Diatomaceous Earth Column 6 ft. Chromosorb Diatomaceous Earth Columns (bonded stationary phase packed columns), 10% Rtx-Stabilwax, ID: 2.1 mm, Length:6 ft, OD: 1/8in, Material: Stainless Steel Tubing, Mesh: 100/120 Silcoport Chromosorb W, Configuration: General, with Low bleed level

ShinCarbon ST Micropacked Column 2 m. ShinCarbon ST Micropacked Column, ID: 1mm, OD: 1/16in, Length: 2 m, NOT on Column, Material: SilcoSmooth Tubing, Mesh: 100/120, Temperature Limits: up to 300 deg C, Separate permanent gases, including carbon monoxide and carbon dioxide, without cryogenic cooling

ShinCarbon ST Micropacked Column 2 m. ShinCarbon ST Micropacked Column, HP, ID: 1mmID, OD: 1/16in, Length: 2 m, Material: SilcoSmooth Tubing, Mesh: 100/120, Temperature Limits: up to 300 deg C, Separate permanent gases, including carbon monoxide and carbon dioxide, without cryogenic cooling

CarboBlack B Packing Material 10 g. CarboBlack B Packing Material, Mesh: 80/120, Temperature: 500 deg C, supports up to 10% loading of a nonsilicone liquid phase, with unique selectivity/little adsorption for alcohol analyses, treated with KOH or picric acid for basic or acidic compound, Size: 10 g

CarboBlack B Packing Material 10 g. CarboBlack B Packing Material, Mesh: 60/80, Temperature: 500 deg C, supports up to 10% loading of a nonsilicone liquid phase, with unique selectivity/little adsorption for alcohol analyses, treated with KOH or picric acid for basic or acidic compound, Size: 10 g

Res-Sil B Packing Material 10 g. Res-SilB 1% TCEP, Packing Material, Mesh: 80/100, Temperature: 175 deg C, for Unique separation of saturated and unsaturated hydrocarbons, with higher thermal stability, For determination of C1-C5 hydrocarbons, Equivalent to Durapak/Porasil packing, Size: 10 g

Res-Sil B Packing Material 10 g. Res-SilB Packing Material, Mesh: 80/100, Temperature Limits: 300 deg C, for Unique separation of saturated and unsaturated hydrocarbons, with higher thermal stability, For fast determination of C1-C5 hydrocarbons, Equivalent to Durapak/Porasil packing, Size: 10 g

HayeSep T, Packing Material, Mesh: 100/120, Temperature Limits: 165 deg C, 24 gram bottle.

HayeSep T, Packing Material, Mesh: 80/100, Temperature Limits: 165 deg C, 24 gram bottle.

HayeSep S, Packing Material, Mesh: 100/120, Temperature Limits: 250 deg C, 24 gram bottle.

HayeSep Q, Packing Material, Mesh: 100/120, Temperature Limits: 275 deg C, 24 gram bottle.

HayeSep P, Packing Material, Mesh: 100/120, Temperature Limits: 250 deg C, 24 gram bottle.

HayeSep P, Packing Material, Mesh: 80/100, Temperature Limits: 250 deg C, 24 gram bottle.

HayeSep N, Packing Material, Mesh: 100/120, Temperature Limits: 165 deg C, 24 gram bottle.

HayeSep N, Packing Material, Mesh: 80/100, Temperature Limits: 165 deg C, 24 gram bottle.

Res-Sil Packing Material 10g. Res-Sil Packing Material, 2% Carbowax 1540 on Res-Sil C, Mesh: 80/100, Temperature: 150 deg C, for Unique separation of saturated and unsaturated hydrocarbon, with Equivalent to Durapak and Porasil packing, yield faster separations of C1 to C4 hydrocarbon, Size: 10g

Res-Sil Packing Material 10g. Res-Sil Packing Material, OPN on Res-Sil C, Mesh: 80/100, Temperature Limit: 150 deg C, for Unique separation of saturated and unsaturated hydrocarbon, with Equivalent to Durapak and Porasil packing, yield faster separations of C1 to C4 hydrocarbon, Size: 10g

HayeSep D, Packing Material, Mesh: 100/120, Temperature Limits: 290 deg C, 24 gram bottle.

HayeSep D, Packing Material, Mesh: 80/100, Temperature Limits: 290 deg C, 24 gram bottle.

HayeSep C, Packing Material, Mesh: 100/120, Temperature Limits: 250 deg C, 24 gram bottle.

HayeSep C, Packing Material, Mesh: 80/100, Temperature Limits: 250 deg C, 24 gram bottle.

HayeSep A, Packing Material, Mesh: 100/120, Temperature Limits:165 deg C, 24 gram bottle.

HayeSep A, Packing Material, Mesh: 80/100, Temperature Limits: 165 deg C, 24 gram bottle.

Res-Sil Packing Material 10g. Res-Sil Packing Material, n-Octane on Res-Sil C, Mesh: 80/100, Temperature limit: 150 deg C, for Unique separation of saturated and unsaturated hydrocarbon, with Equivalent to Durapak and Porasil packing, yield faster separations of C1 to C4 hydrocarbon, Size: 10g

Res-Sil Packing Material 10 g. Res-Sil Packing Material, Res-Sil C, Mesh: 80/100, Temperature Limit: 300 deg C, for Unique separation of saturated and unsaturated hydrocarbon, with Equivalent to Durapak and Porasil packing, yield faster separations of C1 to C4 hydrocarbon, Size: 10 g

ShinCarbon ST Micropacked Column 1 m. ShinCarbon ST Micropacked Column, ID: 0.75 mm, Length: 1 m, OD: 0.95 mm, Material: SilcoSmooth Stainless Steel Tubing, Mesh: 100/120, Temperature: up to 300 deg C, Separate permanent gases, including carbon monoxide and carbon dioxide, without cryogenic cooling

ShinCarbon ST Micropacked Column 1 m. ShinCarbon ST Micropacked Column, ID: 1.0 mm, Length: 1 m, OD: 1/16in, Material: SilcoSmooth Stainless Steel Tubing, Mesh: 100/120, Temperature: up to 300 deg C, Separate permanent gases, including carbon monoxide and carbon dioxide, without cryogenic cooling

ShinCarbon ST Micropacked Column 1/16inx 1.0mm. ShinCarbon ST Micropacked Column, Outer Diameter: 1/16in, ID: 1mm, Mesh: 100/120, Length: 2m, Material: SilcoSmooth Stainless Steel, highly stable material, columns are fully conditioned in an oxygen/moisture free environment to prevent contamination

Rt-XLSulfur Micropacked Column 1/16in x 1mm. Rt-XLSulfur Micropacked Column, Outer Diameter: 0.95mm, ID: 0.75mm, Length: 2m, Made from inert, flexible Silcosteel tubing, fits packed or capillary injection system, columns operate at flows exceeding 10cc/min, Higher capacity than capillary column

Rt-XLSulfur Micropacked Column 1/16in x 1mm. Rt-XLSulfur Micropacked Column, Outer Diameter: 0.95mm, ID: 0.75mm, Length: 1m, Made from inert, flexible Silcosteel tubing, fits packed or capillary injection system, columns operate at flows exceeding 10cc/min, Higher capacity than capillary column

Rt-XLSulfur Micropacked Column 1/16in x 1mm. Rt-XLSulfur Micropacked Column, Outer Diameter: 1/16in, ID: 1.0mm, Length: 2m, Made from inert, flexible Silcosteel tubing, fits packed or capillary injection system, columns operate at flows exceeding 10cc/min, Higher capacity than capillary column

Rt-XLSulfur Micropacked Column 1/16in x 1mm. Rt-XLSulfur Micropacked Column, Outer Diameter: 1/16in, ID: 1.0mm, Length: 1m, Made from inert, flexible Silcosteel tubing, fits packed or capillary injection system, columns operate at flows exceeding 10cc/min, Higher capacity than capillary column

Micropacked GC Column 0.53 mmx0.74 mm. Micropacked GC Column, ShinCarbon ST, Inner Diameter: 0.53mm, Length: 2m, OD: 0.74mm, Material: Silco Smooth Tubing, Mesh: 80/100, Temperature: up to 300 deg C, columns operate at flows exceeding 10 cc/min for trouble-free operation, with Braided Wire End Plugs

Micropacked GC Column 0.75 mm x 1/16in. Micropacked GC Column, 20% TCEP on 80/100 Chromosorb PAW, Inner Diameter: 0.75 mm, Length: 0.56 m, Outer Diameter: 1/16in, Temperature Limits: 0G175 deg C, columns operate at flows exceeding 10 cc/min for trouble-free operation, with Braided Wire End Plugs

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, with Trident Inlet Fitting, Particle Size: 5 um, Spherical, Pore Size: 140 A, Length: 250mm, ID: 4.6mm, without End-Cap, pH: 2.5 to 8, Temperature Limit: 80 degree Celcius, USP Phase Code: L3, Phase Category: bare silica

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 150mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 150mm, ID: 4.6mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 150mm, ID: 2.1mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 50mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 50mm, ID: 4.6mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 50mm, ID: 2.1mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 30mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 30mm, ID: 4.6mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 30mm, ID: 2.1mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 100mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 100mm, ID: 4.6mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 100mm, ID: 2.1mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 5mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 5mm, ID: 2.1mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor ARC-18 LC Column 2.7 um. Raptor ARC-18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 5mm, ID: 4.6mm, Stationary Phase Category: C18, octadecylsilane (L1), Surface Area: 150 m2/g, pH: 1.0-8.0, Temperature: 80 degree Celcius, Pressure: 600 bar/8,700 psi

Raptor Biphenyl LC Column 2.7 um. Raptor Biphenyl LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 150mm, ID: 3.0mm, Stationary Phase Category: Phenyl (L11), Surface Area: 150 m2/g, pH: 1.5-8.0, Temperature: 80 deg C, Maximum Pressure: 8,700 psi, for bioanalytical testing applications

Raptor Biphenyl LC Column 2.7 um. Raptor Biphenyl LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 150mm, ID: 2.1mm, Stationary Phase Category: Phenyl (L11), Surface Area: 150 m2/g, pH: 1.5-8.0, Temperature: 80 deg C, Maximum Pressure: 8,700 psi, for bioanalytical testing applications

Raptor Biphenyl LC Column 2.7 um. Raptor Biphenyl LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 30mm, ID: 3.0mm, Stationary Phase Category: Phenyl (L11), Surface Area: 150 m2/g, pH: 1.5-8.0, Temperature: 80 deg C, Maximum Pressure: 8,700 psi, for bioanalytical testing applications

Raptor Biphenyl LC Column 2.7 um. Raptor Biphenyl LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 30mm, ID: 4.6mm, Stationary Phase Category: Phenyl (L11), Surface Area: 150 m2/g, pH: 1.5-8.0, Temperature: 80 deg C, Maximum Pressure: 8,700 psi, for bioanalytical testing applications

Raptor Biphenyl LC Column 2.7 um. Raptor Biphenyl LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 30mm, ID: 2.1mm, Stationary Phase Category: Phenyl (L11), Surface Area: 150 m2/g, pH range: 1.5-8.0, Temperature limit: 80 degree Celcius, Maximum Pressure: 8,700 psi

Raptor Biphenyl LC Column 2.7 um. Raptor Biphenyl LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 5mm, ID: 4.6mm, Stationary Phase Category: Phenyl (L11), Surface Area: 150 m2/g, pH: 1.5-8.0, Temperature: 80 deg C, Maximum Pressure: 8,700 psi, for bioanalytical testing applications

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 150mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 150mm, ID: 4.6mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 150mm, ID: 2.1mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 50mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 50mm, ID: 4.6mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 50mm, ID: 2.1mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 30mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 30mm, ID: 4.6mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 30mm, ID: 2.1mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 100mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 100mm, ID: 4.6mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 100mm, ID: 2.1mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH: 2.0-8.0, Temperature: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 5mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH range: 2.0-8.0, Temperature limit: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 5mm, ID: 2.1mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH range: 2.0-8.0, Temperature limit: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 2.7 um. Raptor C18 LC Column, Particle Size: 2.7 um, Pore Size: 90 A, Length: 5mm, ID: 4.6mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH range: 2.0-8.0, Temperature limit: 80 degree Celcius, Maximum Pressure: 700 psi

Raptor C18 LC Column 5 um. Raptor C18 LC Column, Particle Size: 5 um, Pore Size: 90 A, Length: 150mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH range: 2.0-8.0, Temperature limit: 80 degree Celcius, Maximum Pressure: 5,800 psi

Raptor C18 LC Column 5 um. Raptor C18 LC Column, Particle Size: 5 um, Pore Size: 90 A, Length: 50mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH range: 2.0-8.0, Temperature limit: 80 degree Celcius, Maximum Pressure: 5,800 psi

Raptor C18 LC Column 5 um. Raptor C18 LC Column, Particle Size: 5 um, Pore Size: 90 A, Length: 30mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH range: 2.0-8.0, Temperature limit: 80 degree Celcius, Maximum Pressure: 5,800 psi

Raptor C18 LC Column 5 um. Raptor C18 LC Column, Particle Size: 5 um, Pore Size: 90 A, Length: 100mm, ID: 3.0mm, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, pH range: 2.0-8.0, Temperature limit: 80 degree Celcius, Maximum Pressure: 5,800 psi

Ultra IBD Column 5 um. Ultra IBD Column, with Trident Inlet Fitting, Particle Size: 5 um, Spherical, Pore Size: 100 A, Length: 150mm, ID: 4.6mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L68, Phase Category: polar-embedded alkyl, Carbon Load: 12%

Ultra IBD Column 5 um. Ultra IBD Column, with Trident Inlet Fitting, Particle Size: 5 um, Spherical, Pore Size: 100 A, Length: 50mm, ID: 2.1mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L68, Phase Category: polar-embedded alkyl, Carbon Load: 12%

Ultra IBD Column 3 um. Ultra IBD Column, with Trident Inlet Fitting, Particle Size: 3 um, Spherical, Pore Size: 100 A, Length: 150mm, ID: 4.6mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L68, Phase Category: polar-embedded alkyl, Carbon Load: 12%

Ultra IBD Column 3 um. Ultra IBD Column, with Trident Inlet Fitting, Particle Size: 3 um, Spherical, Pore Size: 100 A, Length: 100mm, ID: 4.6mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L68, Phase Category: polar-embedded alkyl, Carbon Load: 12%

Ultra C18 Column 5 um. Ultra C18 Column, with Trident Inlet Fitting, Particle Size: 5 um, Spherical, Pore Size: 100 A, Length: 250mm, ID: 4.6mm, pH: 2.5 to 8, Temperature : 80 degree Celcius, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Carbon Load: 20%

Ultra C18 Column 5 um. Ultra C18 Column, with Trident Inlet Fitting, Particle Size: 5 um, Spherical, Pore Size: 100 A, Length: 150mm, ID: 4.6mm, pH: 2.5 to 8, Temperature : 80 degree Celcius, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Carbon Load: 20%

Ultra C18 column 5um. Ultra C18 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 50, Internal Diameter: 2.1mm, Carbon Load: 20%, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Ultra C18 column 5um. Ultra C18 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 200, Internal Diameter: 4.6mm, Carbon Load: 20%, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Ultra C18 column 5um. Ultra C18 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 200, Internal Diameter: 2.1mm, Carbon Load: 20%, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Ultra C18 column 5um. Ultra C18 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 100, Internal Diameter: 4.6mm, Carbon Load: 20%, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Ultra C18 column 5um. Ultra C18 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 100, Internal Diameter: 2.1mm, Carbon Load: 20%, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Ultra C18 column 3um. Ultra C18 column, with Trident Inlet Fitting, spherical, Particle Size: 3um, Pore Size:100 Angstrom, Length: 150, Internal Diameter: 4.6mm, Carbon Load: 20%, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Ultra C18 column 3um. Ultra C18 column, with Trident Inlet Fitting, spherical, Particle Size: 3um, Pore Size:100 Angstrom, Length: 30, Internal Diameter: 2.1mm, Carbon Load: 20%, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Ultra C18 column 3um. Ultra C18 column, with Trident Inlet Fitting, spherical, Particle Size: 3um, Pore Size:100 Angstrom, Length: 100, Internal Diameter: 4.6mm, Carbon Load: 20%, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Ultra C18 column 3um. Ultra C18 column, with Trident Inlet Fitting, spherical, Particle Size: 3um, Pore Size:100 Angstrom, Length: 100, Internal Diameter: 2.1mm, Carbon Load: 20%, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Allure PFP Propyl Column 5um. Allure PFP Propyl Column with Trident Inlet Fitting, particle size: 5um, Pore Size: 60 Angstrom, length: 50mm, Internal Diameter: 2.1mm, carbon load: 17%, endcap: fully endcapped, pH: 2.5 to 7.5, Temperature limit: 80 deg C

Allure Organic Acids Column 5um. Allure Silica Column, with Trident inlet fitting, spherical, Particle Size: 5um, Pore Size: 60 Angstrom, Length: 300mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 deg C, for polar organic acids, on a single 30 cm column

Allure Organic Acids Column 5um. Allure Silica Column, with Trident inlet fitting, spherical, Particle Size: 5um, Pore Size: 60 Angstrom, Length: 150mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 deg C, for polar organic acids, on a single 30 cm column

Ultra Amino Column 5um. Ultra Amino Column, with Trident Inlet Fitting, Particle Size: 5um, Pore Size: 100 Angstrom, Length: 250 mm, Internal Diameter: 4.6 mm, Carbon Load: 2%, pH Range: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L8, Phase Category: amino, Ligand Type: aminopropylsilane

Ultra C8 column 5um. Ultra C8 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 250, Internal Diameter: 4.6mm, Carbon Load: 12%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8

Ultra C8 column 5um. Ultra C8 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 150, Internal Diameter: 4.6mm, Carbon Load: 12%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8

Ultra C8 column 5um. Ultra C8 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 50, Internal Diameter: 4.6mm, Carbon Load: 12%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8

Ultra C8 column 5um. Ultra C8 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 50, Internal Diameter: 2.1mm, Carbon Load: 12%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8

Ultra C8 column 3um. Ultra C8 column, with Trident Inlet Fitting, spherical, Particle Size: 3um, Pore Size:100 Angstrom, Length: 50, Internal Diameter: 2.1mm, Carbon Load: 12%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8

Ultra C8 column 3um. Ultra C8 column, with Trident Inlet Fitting, spherical, Particle Size: 3um, Pore Size:100 Angstrom, Length: 30, Internal Diameter: 4.6mm, Carbon Load: 12%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8

Ultra C8 column 3um. Ultra C8 column, with Trident Inlet Fitting, spherical, Particle Size: 3um, Pore Size:100 Angstrom, Length: 100, Internal Diameter: 2.1mm, Carbon Load: 12%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8

Ultra C4 column 5um. Ultra C4 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 250, Internal Diameter:, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, Ligand Type: monomeric C4, for HPLC

Ultra C4 column 5um. Ultra C4 column, with Trident Inlet Fitting, spherical, Particle Size: 5um, Pore Size:100 Angstrom, Length: 150, Internal Diameter:, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, Ligand Type: monomeric C4, for HPLC

Ultra Silica Column 5 um. Ultra Silica Column, Made of high-purity, type-B silica, Particle Size: 5um, Pore Size: 100 Angstrom, Length: 30mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, for normal-phase or HILIC separations

Ultra Silica Column 3um. Ultra Silica Column, Made of high-purity, type-B silica, Particle Size: 3um, Pore Size: 100 Angstrom, Length: 150mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, for normal-phase or HILIC separations

Ultra Silica Column 3um. Ultra Silica Column, Made of high-purity, type-B silica, Particle Size: 3um, Pore Size: 100 Angstrom, Length: 50mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, for normal-phase or HILIC separations

Ultra Silica Column 3um. Ultra Silica Column, Made of high-purity, type-B silica, Particle Size: 3um, Pore Size: 100 Angstrom, Length: 100 mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, for normal-phase or HILIC separations

Ultra Silica Column 3um. Ultra Silica Column, Made of high-purity, type-B silica, Particle Size: 3um, Pore Size: 100 Angstrom, Length: 100 mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, for normal-phase or HILIC separations

Pinnacle DB Biphenyl Guard Cartridge 5um. Viva C18 Guard Cartridge, spherical, Particle Size: 5um, size: 10 x 4.0mm, Pore size: 300 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Pinnacle DB Biphenyl Guard Cartridge 5um. Viva Silica Guard Cartridge, spherical, Particle Size: 5um, size: 10 x 4.0mm, Pore size: 300 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Pinnacle DB Biphenyl Guard Cartridge 5um. Pinnacle DB Cyano Guard Cartridge, spherical, Particle Size: 5um, Size: 10 x 2.1mm, Pore size: 140 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Pinnacle DB Biphenyl Guard Cartridge 5um. Pinnacle DB Cyano Guard Cartridge, spherical, Particle Size: 5um, Size: 10 x 4.0mm, Pore size: 140 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Pinnacle DB Biphenyl Guard Cartridge 5um. Pinnacle DB C18 Guard Cartridge, spherical, Particle Size: 5um, Size: 10 x 2.1mm, Pore size: 140 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Pinnacle DB Biphenyl Guard Cartridge 5um. Pinnacle DB C18 Guard Cartridge, spherical, Particle Size: 5um, Size: 10 x 4.0mm, Pore size: 140 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Pinnacle DB Biphenyl Guard Cartridge 5um. Pinnacle DB C8 Guard Cartridge, spherical, Particle Size: 5um, Size: 10 x 2.1mm, Pore size: 140 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Pinnacle DB Biphenyl Guard Cartridge 5um. Pinnacle DB C8 Guard Cartridge, spherical, Particle Size: 5um, Size: 10 x 4.0mm, Pore size: 140 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Pinnacle DB Biphenyl Guard Cartridge 5um. Pinnacle DB Silica Guard Cartridge, spherical, Particle Size: 5um, Size: 10 x 2.1mm, Pore size: 140 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Pinnacle DB Biphenyl Guard Cartridge 5um. Pinnacle DB Silica Guard Cartridge, spherical, Particle Size: 5um, Size: 10 x 4.0mm, Pore size: 140 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Raptor C18 EXP Guard Column Cartridge 5um. Raptor C18 EXP Guard Column Cartridge, Particle Size: 5 um, size: 5 x 3.0mm, Patented titanium hybrid ferrules can be installed repeatedly without compromising high-pressure seal, Auto-adjusting design

Raptor C18 EXP Guard Column Cartridge 5um. Raptor C18 EXP Guard Column Cartridge, Particle Size: 5 um, size: 5 x 2.1mm, Patented titanium hybrid ferrules can be installed repeatedly without compromising high-pressure seal, Auto-adjusting design

Raptor C18 EXP Guard Column Cartridge 5um. Raptor C18 EXP Guard Column Cartridge, Particle Size: 5 um, size: 5 x 4.6mm, Patented titanium hybrid ferrules can be installed repeatedly without compromising high-pressure seal, Auto-adjusting design

Pinnacle II PAH Guard Cartridge 5um. Pinnacle II PAH Guard Cartridge, spherical, Particle Size: 5 um, size: 10 x 2.1mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Pinnacle II PAH Guard Cartridge 5um. Pinnacle II PAH Guard Cartridge, spherical, Particle Size: 5 um, size: 10 x 4.0mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra Quat Guard Cartridge 5um. Ultra Quat Guard Cartridge, spherical, Particle Size: 5 um, size: 10 x 2.1mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra Quat Guard Cartridge 5um. Ultra Quat Guard Cartridge, spherical, Particle Size: 5 um, size: 10 x 4.0mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra PFP Propyl Guard Cartridge 5um. Ultra PFP Propyl Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra PFP Propyl Guard Cartridge 5um. Ultra PFP Propyl Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra Aqueous C18 Guard Cartridge 5um. Ultra Aqueous C18 Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra Aqueous C18 Guard Cartridge 5um. Ultra Aqueous C18 Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra Carbamate Guard Cartridge 5um. Ultra Carbamate Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra IBD Guard Cartridge 5um. Ultra IBD Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra IBD Guard Cartridge 5um. Ultra IBD Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra C18 Guard Cartridge 5um. Ultra C18 Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra C18 Guard Cartridge 5um. Ultra C18 Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Allure PFP Propyl Guard Cartridge 5um. Allure PFP Propyl Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 60 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Allure PFP Propyl Guard Cartridge 5um. Allure PFP Propyl Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 60 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Allure Organic Acids Guard Cartridge 5um. Allure Organic Acids Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 60 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Allure Silica Guard Cartridge 5um. Allure Silica Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 60 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Allure Silica Guard Cartridge 5um. Allure Silica Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 60 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra Amino Guard Cartridge 5um. Ultra Amino Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra Cyano Guard Cartridge 5um. Ultra Cyano Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra Cyano Guard Cartridge 5um. Ultra Cyano Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra C8 Guard Cartridge 5um. Ultra C8 Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra C8 Guard Cartridge 5um. Ultra C8 Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra C4 Guard Cartridge 5um. Ultra C4 Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra C4 Guard Cartridge 5um. Ultra C4 Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra C1 Guard Cartridge 5um. Ultra C1 Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra C1 Guard Cartridge 5um. Ultra C1 Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra Silica Guard Cartridge 5um. Ultra Silica Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 2.1 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Ultra Silica Guard Cartridge 5um. Ultra Silica Guard Cartridge, Particle size: 5 um, Spherical, Size: 10 x 4.0 mm, Pore size: 100 Angstrom, Managing High Backpressure, Guard column requires Trident direct guard cartridge system

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 250 mm, Internal Diameter: 4.6 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 250 mm, Internal Diameter: 2.1 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 250 mm, Internal Diameter: 1.0 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 150 mm, Internal Diameter: 4.6 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 150 mm, Internal Diameter: 2.1 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 150 mm, Internal Diameter: 1.0 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 50 mm, Internal Diameter: 4.6 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 50 mm, Internal Diameter: 2.1 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 50 mm, Internal Diameter: 1.0 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 30 mm, Internal Diameter: 4.6 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 30 mm, Internal Diameter: 2.1 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 200 mm, Internal Diameter: 4.6 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 200 mm, Internal Diameter: 2.1 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 100 mm, Internal Diameter: 4.6 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 100 mm, Internal Diameter: 2.1 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva PFP Propyl Column 5um. Viva PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 100 mm, Internal Diameter: 1.0 mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Viva Biphenyl Column 5um. Viva Biphenyl Column, Particle size: 5um, Spherical, Pore Size: 300A, Length: 250mm, ID: 4.6mm, Carbon Load: 7%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L11, Phase Category: Phenyl, Ligand Type: Unique Biphenyl, Application: Separating peptide or proteins

Viva Biphenyl Column 5um. Viva Biphenyl Column, Particle size: 5um, Spherical, Pore Size: 300A, Length: 250mm, ID: 2.1mm, Carbon Load: 7%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L11, Phase Category: Phenyl, Ligand Type: Unique Biphenyl, Application: Separating peptide or proteins

Viva Biphenyl Column 5um. Viva Biphenyl Column, Particle size: 5um, Spherical, Pore Size: 300A, Length: 250mm, ID: 1.0mm, Carbon Load: 7%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L11, Phase Category: Phenyl, Ligand Type: Unique Biphenyl, Application: Separating peptide or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 250 mm, ID: 2.1 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 250 mm, ID: 1.0 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 150 mm, ID: 4.6 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 150 mm, ID: 1.0 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 50 mm, ID: 4.6 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 50 mm, ID: 2.1 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 50 mm, ID: 1.0 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 30 mm, ID: 4.6 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 30 mm, ID: 2.1 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 200 mm, ID: 4.6 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 200 mm, ID: 2.1 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 100 mm, ID: 4.6 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 100 mm, ID: 2.1 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva C4 Column 5um. Viva C4 Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 100 mm, ID: 1.0 mm, Carbon Load: 3.5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, Butylsilane, Ligand Type: Monomeric C4, Application: Separating peptides or proteins

Viva Silica Column 5um. Viva Silica Column, Particle size: 5 um, Spherical, Pore Size: 300 A, Length: 250 mm, ID: 4.6 mm, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L3, Phase Category: Bare silica, Application: separating peptides or proteins, normal-phase or HILIC separations

Pinnacle DB PFP Propyl Column 5um. Pinnacle DB PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 140 A, Length: 50 mm, ID: 4.6 mm, Carbon Load: 6%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Pinnacle DB PFP Propyl Column 5um. Pinnacle DB PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 140 A, Length: 30 mm, ID: 4.6 mm, Carbon Load: 6%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Pinnacle DB PFP Propyl Column 5um. Pinnacle DB PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 140 A, Length: 30 mm, ID: 2.1 mm, Carbon Load: 6%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Pinnacle DB PFP Propyl Column 5um. Pinnacle DB PFP Propyl Column, Particle size: 5 um, Spherical, Pore Size: 140 A, Length: 200mm, ID: 2.1mm, Carbon Load: 6%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Pinnacle DB PFP Propyl Column 3um. Pinnacle DB PFP Propyl Column, Particle size: 3 um, Spherical, Pore Size: 140 A, Length: 30mm, ID: 4.6mm, Carbon Load: 6%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L43, Phase Category: Fluorophenyl propyl, Ligand Type: Pentafluorophenyl propyl

Pinnacle DB Cyano Column 5um. Pinnacle DB Cyano Column, Particle size: 5um, Spherical, Pore Size: 140 A, Length: 50mm, ID: 4.6mm, Carbon Load: 4%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: cyano, Ligand Type: cyanopropylsilane, for analysis of protonated bases

Pinnacle DB Cyano Column 5um. Pinnacle DB Cyano Column, Particle size: 5um, Spherical, Pore Size: 140 A, Length: 30mm, ID: 4.6mm, Carbon Load: 4%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: cyano, Ligand Type: cyanopropylsilane, for analysis of protonated bases

Pinnacle DB Cyano Column 5um. Pinnacle DB Cyano Column, Particle size: 5um, Spherical, Pore Size: 140 A, Length: 30mm, ID: 2.1mm, Carbon Load: 4%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: cyano, Ligand Type: cyanopropylsilane, for analysis of protonated bases

Pinnacle DB Cyano Column 5um. Pinnacle DB Cyano Column, Particle size: 5um, Spherical, Pore Size: 140A, Length: 200mm, ID: 4.6mm, Carbon Load: 4%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: cyano, Ligand Type: cyanopropylsilane, for analysis of protonated bases

Pinnacle DB Cyano Column 5um. Pinnacle DB Cyano Column, Particle size: 5um, Spherical, Pore Size: 140A, Length: 200mm, ID: 2.1mm, Carbon Load: 4%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: cyano, Ligand Type: cyanopropylsilane, for analysis of protonated bases

Pinnacle DB Cyano Column 5um. Pinnacle DB Cyano Column, Particle size: 5um, Spherical, Pore Size: 140A, Length: 100mm, ID: 4.6mm, Carbon Load: 4%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: cyano, Ligand Type: cyanopropylsilane, for analysis of protonated bases

Pinnacle DB C8 Column 5um. Pinnacle DB C8 Column, Pore Size: 140A, Particle Size: 5um, Length: 250mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L7, Carbon Load: 6%, Phase Category: C8, octylsilane, provide less hydrophobic retention and improved basic peak shape

Pinnacle DB C8 Column 5um. Pinnacle DB C8 Column, Pore Size: 140A, Particle Size: 5um, Length: 30mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L7, Carbon Load: 6%, Phase Category: C8, octylsilane, provide less hydrophobic retention and improved basic peak shape

Pinnacle DB C8 Column 5um. Pinnacle DB C8 Column, Pore Size: 140A, Particle Size: 5um, Length: 200mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L7, Carbon Load: 6%, Phase Category: C8, octylsilane, provide less hydrophobic retention and improved basic peak shape

Pinnacle DB C8 Column 5um. Pinnacle DB C8 Column, Pore Size: 140A, Particle Size: 5um, Length: 200mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L7, Carbon Load: 6%, Phase Category: C8, octylsilane, provide less hydrophobic retention and improved basic peak shape

Pinnacle DB C8 Column 5um. Pinnacle DB C8 Column, Pore Size: 140A, Particle Size: 5um, Length: 100mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L7, Carbon Load: 6%, Phase Category: C8, octylsilane, provide less hydrophobic retention and improved basic peak shape

Pinnacle DB Silica Column 5um. Pinnacle DB Silica Column, Pore Size: 140A, Particle Size: 5 um, Length: 250mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Phase Category: bare silica, optimized For UHPLC stability, normal-phase or HILIC separations

Pinnacle DB Biphenyl column 5um. Pinnacle DB Biphenyl column, Pore Size: 140A, Particle Size: 5 um, Length: 200mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, carbon load: 8%, USP Phase Code: USP L11, offers excellent retention For both polar and nonpolar compounds due to aryl linker

Pinnacle DB Biphenyl column 5um. Pinnacle DB Biphenyl column, Pore Size: 140A, Particle Size: 5 um, Length: 200mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, carbon load: 8%, USP Phase Code: USP L11, offers excellent retention For both polar and nonpolar compounds due to aryl linker

Raptor Biphenyl LC Column 5um. Raptor Biphenyl LC Column, Pore Size: 90 A, Particle Size: 5 um, Length: 150mm, Internal Diameter: 4.6mm, pH: 1.5-8.0, Temperature: 80 C, Stationary Phase Category: Phenyl (L11), Ligand Type: Biphenyl, easily achieve peak separation and faster analysis

Raptor C18 LC Column 5um. Raptor C18 LC Column, Pore Size: 90 A, Particle Size: 5 um, Length: 250mm, Internal Diameter: 4.6mm, pH: 2.0-8.0, Temperature: 80 C, USP Phase Code: USP L1, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C24, For RPHPLC

Raptor C18 LC Column 5um. Raptor C18 LC Column, Pore Size: 90 A, Particle Size: 5 um, Length: 150mm, Internal Diameter: 4.6mm, pH: 2.0-8.0, Temperature: 80 C, USP Phase Code: USP L1, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C23, For RPHPLC

Raptor C18 LC Column 5um. Raptor C18 LC Column, Pore Size: 90 A, Particle Size: 5 um, Length: 150mm, Internal Diameter: 2.1mm, pH: 2.0-8.0, Temperature: 80 C, USP Phase Code: USP L1, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C22, For RPHPLC

Raptor C18 LC Column 5um. Raptor C18 LC Column, Pore Size: 90 A, Particle Size: 5 um, Length: 50mm, Internal Diameter: 4.6mm, pH: 2.0-8.0, Temperature: 80 C, USP Phase Code: USP L1, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C21, For RPHPLC

Raptor C18 LC Column 5um. Raptor C18 LC Column, Pore Size: 90 A, Particle Size: 5 um, Length: 50mm, Internal Diameter: 2.1mm, pH: 2.0-8.0, Temperature: 80 C, USP Phase Code: USP L1, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C20, For RPHPLC

Raptor C18 LC Column 5um. Raptor C18 LC Column, Pore Size: 90 A, Particle Size: 5 um, Length: 100mm, Internal Diameter: 4.6mm, pH: 2.0-8.0, Temperature: 80 C, USP Phase Code: USP L1, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C19, For RPHPLC

Raptor C18 LC Column 5um. Raptor C18 LC Column, Pore Size: 90 A, Particle Size: 5 um, Length: 100mm, Internal Diameter: 2.1mm, pH: 2.0-8.0, Temperature: 80 C, USP Phase Code: USP L1, Stationary Phase Category: C18, octadecylsilane (L1), Ligand Type: End-capped C18, For RPHPLC

Ultra Quat Column 5um. Ultra Quat Column, Pore Size: 100 A, Particle Size: 5um, spherical, Length: 150mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, Ideal For the analysis of paraquat and diquat or other quaternary amines

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 250mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 250mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 150mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 150mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 50mm, Internal Diameter: 10mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 50mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 50mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 30mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 30mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 200mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 200mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 100mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 5um. , Pore Size: 100 A, Particle Size: 5um, spherical, Length: 100mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 3um. , Pore Size: 100 A, Particle Size: 3 um, spherical, Length: 150mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 3um. , Pore Size: 100 A, Particle Size: 3 um, spherical, Length: 150mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 3um. , Pore Size: 100 A, Particle Size: 3 um, spherical, Length: 50mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 3um. , Pore Size: 100 A, Particle Size: 3 um, spherical, Length: 50mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 3um. , Pore Size: 100 A, Particle Size: 3 um, spherical, Length: 30mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 3um. , Pore Size: 100 A, Particle Size: 3 um, spherical, Length: 30mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 3um. , Pore Size: 100 A, Particle Size: 3 um, spherical, Length: 100mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra PFP Propyl Column 3um. , Pore Size: 100 A, Particle Size: 3 um, spherical, Length: 100mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L43, Phase Category: fluorophenyl propyl, Carbon Load: 11%, Ligand Type: pentafluorophenyl propyl, For selective HPLC application

Ultra Aqueous C18 HPLC Prep Column 5um. Ultra Aqueous C18 HPLC Prep Column, Pore Size: 100 A, Particle Size: 5 um, spherical, Length: 150mm, Internal Diameter: 30mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L1, Phase Category: modified C18, Carbon Load: 15%, Ligand Type: polar modified

Ultra Aqueous C18 HPLC Prep Column 5um. Ultra Aqueous C18 HPLC Prep Column, Pore Size: 100 A, Particle Size: 5 um, spherical, Length: 50mm, Internal Diameter: 30mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: L1, Phase Category: modified C18, Carbon Load: 15%, Ligand Type: polar modified

Ultra Carbamate Column 3um. ULtra Carbamate Column, Pore Size: 100 A, Particle Size: 3 um, Length: 50mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, specifically For carbamates analysis compatible with fluorescence or LC-MS detection, significantly reduce solvent usage

Ultra Carbamate Column 3um. ULtra Carbamate Column, Pore Size: 100 A, Particle Size: 3 um, Length: 50mm, Internal Diameter: 4.0mm, pH: 2.5 to 8, Temperature: 80 C, specifically For carbamates analysis compatible with fluorescence or LC-MS detection, significantly reduce solvent usage

Ultra Carbamate Column 3um. ULtra Carbamate Column, Pore Size: 100 A, Particle Size: 3 um, Length: 50mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, specifically For carbamates analysis compatible with fluorescence or LC-MS detection, significantly reduce solvent usage

Ultra Carbamate Column 3um. ULtra Carbamate Column, Pore Size: 100 A, Particle Size: 3 um, Length: 100mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, specifically For carbamates analysis compatible with fluorescence or LC-MS detection, significantly reduce solvent usage

Ultra Carbamate Column 3um. ULtra Carbamate Column, Pore Size: 100 A, Particle Size: 3 um, Length: 100mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, specifically For carbamates analysis compatible with fluorescence or LC-MS detection, significantly reduce solvent usage

Ultra IBD HPLC Prep Column 5um. Ultra IBD HPLC Prep Column, Pore Size: 100 A, Particle Size: 5 um, Length: 250mm, Internal Diameter: 10mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: -L68, Phase Category: polar embedded alkyl, Carbon Load: 12%, Ligand Type: polar functional embedded alkyl

Ultra IBD HPLC Prep Column 5um. Ultra IBD HPLC Prep Column, Pore Size: 100 A, Particle Size: 5 um, Length: 150mm, Internal Diameter: 21.2mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: -L68, Phase Category: polar embedded alkyl, Carbon Load: 12%, Ligand Type: polar functional embedded alkyl

Ultra IBD HPLC Prep Column 5um. Ultra IBD HPLC Prep Column, Pore Size: 100 A, Particle Size: 5 um, Length: 150mm, Internal Diameter: 10mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: -L68, Phase Category: polar embedded alkyl, Carbon Load: 12%, Ligand Type: polar functional embedded alkyl

Ultra IBD HPLC Prep Column 5um. Ultra IBD HPLC Prep Column, Pore Size: 100 A, Particle Size: 5 um, Length: 50mm, Internal Diameter: 30mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: -L68, Phase Category: polar embedded alkyl, Carbon Load: 12%, Ligand Type: polar functional embedded alkyl

Ultra IBD HPLC Prep Column 5um. Ultra IBD HPLC Prep Column, Pore Size: 100 A, Particle Size: 5 um, Length: 50mm, Internal Diameter: 21.2mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: -L68, Phase Category: polar embedded alkyl, Carbon Load: 12%, Ligand Type: polar functional embedded alkyl

Ultra IBD HPLC Prep Column 5um. Ultra IBD HPLC Prep Column, Pore Size: 100 A, Particle Size: 5 um, Length: 50mm, Internal Diameter: 10mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: -L68, Phase Category: polar embedded alkyl, Carbon Load: 12%, Ligand Type: polar functional embedded alkyl

Ultra IBD HPLC Prep Column 5um. Ultra IBD HPLC Prep Column, Pore Size: 100 A, Particle Size: 5 um, Length: 100mm, Internal Diameter: 21.2mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: -L68, Phase Category: polar embedded alkyl, Carbon Load: 12%, Ligand Type: polar functional embedded alkyl

Ultra IBD HPLC Prep Column 5um. Ultra IBD HPLC Prep Column, Pore Size: 100 A, Particle Size: 5 um, Length: 100mm, Internal Diameter: 10mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: -L68, Phase Category: polar embedded alkyl, Carbon Load: 12%, Ligand Type: polar functional embedded alkyl

Allure Organic Acids Column 5um. Allure Organic Acids Column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 250mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, provides enhanced retention and selectivity For polar organic acids, allowing the easy separation

Allure Organic Acids Column 5um. Allure Organic Acids Column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 150mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, provides enhanced retention and selectivity For polar organic acids, allowing the easy separation

Allure Silica column 5um. Allure Silica column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 250mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Highly retentive phase For normal phase separations, Type B silica packing

Allure Silica column 5um. Allure Silica column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 250mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Highly retentive phase For normal phase separations, Type B silica packing

Allure Silica column 5um. Allure Silica column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 50mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Highly retentive phase For normal phase separations, Type B silica packing

Allure Silica column 5um. Allure Silica column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 50mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Highly retentive phase For normal phase separations, Type B silica packing

Allure Silica column 5um. Allure Silica column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 30mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Highly retentive phase For normal phase separations, Type B silica packing

Allure Silica column 5um. Allure Silica column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 30mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Highly retentive phase For normal phase separations, Type B silica packing

Allure Silica column 5um. Allure Silica column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 200mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Highly retentive phase For normal phase separations, Type B silica packing

Allure Silica column 5um. Allure Silica column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 200mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Highly retentive phase For normal phase separations, Type B silica packing

Allure Silica column 5um. Allure Silica column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 100mm, Internal Diameter: 4.6mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Highly retentive phase For normal phase separations, Type B silica packing

Allure Silica column 5um. Allure Silica column, Pore Size: 60 A, Particle Size: 5um, spherical, Length: 100mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: USP L3, Highly retentive phase For normal phase separations, Type B silica packing

Ultra Aromax Column 3um. Ultra Aromax Column, Pore Size: 100 A, Particle Size: 3 um, Length: 150 mm, Internal Diameter: 2.1mm, pH: 2.5 to 8, Temperature: 80 C, USP Phase Code: -L11, Phase Category: phenyl, Carbon Load: 17%, Ligand Type: proprietary phenyl ligand For aromatic/unsaturated compounds

Ultra Amino column 5um. Ultra Amino Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 4.6mm, Carbon load: 2%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L8, Phase Category: Amino, Ligand Type: aminopropylsilane, high-purity, type-B silica

Ultra Amino column 5um. Ultra Amino Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 200, ID: 4.6mm, Carbon load: 2%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L8, Phase Category: Amino, Ligand Type: aminopropylsilane, high-purity, type-B silica

Ultra Amino column 3um. Ultra Amino Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 4.6mm, Carbon load: 2%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L8, Phase Category: Amino, Ligand Type: aminopropylsilane, high-purity, type-B silica

Ultra Cyano Prep Column 5um. Ultra Cyano Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 250, ID: 21.2mm, Carbon load: 8%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: Cyano, Ligand Type: cyanopropylsilane, Popular bonded phases

Ultra Cyano 5um. Ultra Cyano, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 250, ID: 2.1mm, Carbon load: 8%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: Cyano, Ligand Type: cyanopropylsilane, Popular bonded phases

Ultra Cyano Prep Column 5um. Ultra Cyano Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 30mm, Carbon load: 8%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: Cyano, Ligand Type: cyanopropylsilane, Popular bonded phases

Ultra Cyano Prep Column 5um. Ultra Cyano Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 21.2mm, Carbon load: 8%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: Cyano, Ligand Type: cyanopropylsilane, Popular bonded phases

Ultra C8 Prep Column 5um. Ultra C8 Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 30mm, Carbon load: 12%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8, high-purity, base-deactivated reversed phase

Ultra C8 Prep Column 5um. Ultra C8 Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 21.2mm, Carbon load: 12%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8, high-purity

Ultra C8 Prep Column 5um. Ultra C8 Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 10mm, Carbon load: 12%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8, high-purity, base-deactivated reversed phase

Ultra C8 Column 5um. Ultra C8 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 4.0mm, Carbon load: 12%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8, high-purity, base-deactivated reversed phase packing

Ultra C8 Column 5um. Ultra C8 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 2.1mm, Carbon load: 12%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand Type: monomeric C8, high-purity, base-deactivated reversed phase packing

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 250, ID: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 250, ID: 2.1mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 2.1mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 2.1mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 2.1mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 200, ID: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 200, ID: 2.1mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 5um. Ultra C4 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 2.1mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 3um. Ultra C4 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 3um. Ultra C4 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 2.1mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 3um. Ultra C4 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 3um. Ultra C4 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 2.1mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 3um. Ultra C4 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 3um. Ultra C4 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 2.1mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 3um. Ultra C4 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully end-capped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C4 Column 3um. Ultra C4 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 2.1mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, fully endcapped, stable C4 packing, Less retention than C18 or C8 phases

Ultra C1 Column 5um. Ultra C1 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 250, ID: 2.1mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 5um. Ultra C1 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 2.1mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 5um. Ultra C1 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 4.6mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 5um. Ultra C1 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 2.1mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 5um. Ultra C1 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 4.6mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 5um. Ultra C1 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 2.1mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 5um. Ultra C1 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 200, ID: 4.6mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 5um. Ultra C1 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 200, ID: 2.1mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 5um. Ultra C1 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 4.6mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 5um. Ultra C1 Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 2.1mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 3um. Ultra C1 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 4.6mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 3um. Ultra C1 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 2.1mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 3um. Ultra C1 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 4.6mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 3um. Ultra C1 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 2.1mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 3um. Ultra C1 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 4.6mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 3um. Ultra C1 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 2.1mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 3um. Ultra C1 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 4.6mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra C1 Column 3um. Ultra C1 Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 2.1mm, Carbon load: 5%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L13, Exceptionally stable C1 phase, Least retentive reversed phase hydrocarbon packing, Phase Category: trimethylsilane

Ultra Silica Prep Column 5um. Ultra Silica Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 250, ID: 21.2mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 5um. Ultra Silica Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 250, ID: 2.1mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Prep Column 5um. Ultra Silica Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 30mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Prep Column 5um. Ultra Silica Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 21.2mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Prep Column 5um. Ultra Silica Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 10mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Prep Column 5um. Ultra Silica Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 21.2mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Prep Column 5um. Ultra Silica Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 10mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 5um. Ultra Silica Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 4.6mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 5um. Ultra Silica Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 2.1mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 5um. Ultra Silica Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 4.6mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 5um. Ultra Silica Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 2.1mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 5um. Ultra Silica Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 200, ID: 4.6mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 5um. Ultra Silica Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 200, ID: 2.1mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Prep Column 5um. Ultra Silica Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 21.2mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Prep Column 5um. Ultra Silica Prep Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 10mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 5um. Ultra Silica Column, Particle Size: 5um Spherical, Pore Size: 100 A, Length(mm): 100, ID: 4.6mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 3um. Ultra Silica Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 4.6mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 3um. Ultra Silica Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 150, ID: 2.1mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 3um. Ultra Silica Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 50, ID: 4.6mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 3um. Ultra Silica Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 4.6mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra Silica Column 3um. Ultra Silica Column, Particle Size: 3um Spherical, Pore Size: 100 A, Length(mm): 30, ID: 2.1mm, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, High surface area, Type B silica packing, High density bondings

Ultra C18 Bulk Packing, Pore Size: 100 A, Particle Size: 5um, Consistent, high-quality materials, Size: 10g

Ultra Amino Bulk Packing, Pore Size: 100 A, Particle Size: 5um, Consistent, high-quality materials, Size: 10g

Ultra Cyano Bulk Packing, Pore Size: 100 A, Particle Size: 5um, Consistent, high-quality materials, Size: 10g

Ultra C8 Bulk Packing, Pore Size: 100 A, Particle Size: 5um, Consistent, high-quality materials, Size: 10g

Ultra C4 Bulk Packing, Pore Size: 100 A, Particle Size: 5um, Consistent, high-quality materials, Size: 10g

Ultra C1 Bulk Packing, Pore Size: 100 A, Particle Size: 5um, Consistent, high-quality materials, Size: 10g

Ultra Silica Bulk Packing, Pore Size: 100 A, Particle Size: 5um, Consistent, high-quality materials, Size: 10g

HPLC Column Assembly, ID: 4.6 mm, Length: 200 mm, OD: 1/4in, Internal 1/16in, 316 stainless steel tubing complete with end-fittings, frits, nuts, and ferrules

HPLC Column Assembly, ID: 4.6 mm, Length: 50 mm, OD: 1/4in, Internal 1/16in, 316 stainless steel tubing complete with end-fittings, frits, nuts, and ferrules

Viva C18 With Trident 5um. Viva C18 Column With Trident Inlet Fitting, Particle Size: 5um Spherical, Pore Size: 300 A, Length(mm): 250, Inner Diameter: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Viva C18 With Trident 5um. Viva C18 Column With Trident Inlet Fitting, Particle Size: 5um Spherical, Pore Size: 300 A, Length(mm): 150, Inner Diameter: 4.6mm, Carbon load: 9%, pH: 2.5-8, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand Type: monomeric C18

Pinnacle DB Cyano Column 5um. Pinnacle DB Cyano Column, Particle Size: 5 um, spherical, Pore Size: 140 A, Carbon Load: 4%, Length: 250 mm, ID: 4.6 mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L10, Phase Category: cyano, Ligand Type: cyanopropylsilane, For analysis of protonated bases

Pinnacle DB C18 Column 5um. Pinnacle DB C18 Column, Particle Size: 5 um, spherical, Pore Size: 140 A, Carbon Load: 11%, Length: 250 mm, ID: 4.6 mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand: monomeric C18, For compounds acidic to basic

Pinnacle DB C18 Column 5um. Pinnacle DB C18 Column, Particle Size: 5 um, spherical, Pore Size: 140 A, Carbon Load: 11%, Length: 150 mm, ID: 4.6 mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand: monomeric C18, For compounds acidic to basic

Pinnacle DB C18 Column 5um. Pinnacle DB C18 Column, Particle Size: 5 um, spherical, Pore Size: 140 A, Carbon Load: 11%, Length: 50 mm, ID: 4.6 mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: C18, octadecylsilane, Ligand: monomeric C18, For compounds acidic to basic

Pinnacle DB C8 Column 5um. Pinnacle DB C8 Column, Particle Size: 5 um, spherical, Pore Size: 140 A, Carbon Load: 6%, Length: 150 mm, ID: 4.6 mm, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, octylsilane, Ligand: monomeric C8, For compounds acidic to slightly basic

Ultra AQ C18 5um column. Ultra AQ C18 column with Trident Inlet Fitting, Particle Size: 5um, Pore Size: 100A, Spherical, Length: 250mm, ID: 4.6mm, Carbon Load: 15%, pH: 2.5 - 8, Temperature: 80C, USP Phase Code: L1, Phase Category: modified C18, proprietary polar modified and functionally bonded C18

Ultra AQ C18 5um column. Ultra AQ C18 column with Trident Inlet Fitting, Particle Size: 5um, Pore Size: 100A, Spherical, Length: 150mm, ID: 4.6mm, Carbon Load: 15%, pH: 2.5 - 8, Temperature: 80C, USP Phase Code: L1, Phase Category: modified C18, proprietary polar modified and functionally bonded C18

Ultra AQ C18 5um column. Ultra AQ C18 column with Trident Inlet Fitting, Particle Size: 5um, Pore Size: 100A, Spherical, Length: 50mm, ID: 4.6mm, Carbon Load: 15%, pH: 2.5 to 8, Temperature: 80C, USP Phase Code: L1, Phase Category: modified C18, proprietary polar modified and functionally bonded C18

Ultra AQ C18 3um column. Ultra AQ C18 column with Trident Inlet Fitting, Particle Size: 3um, Pore Size: 100A, Spherical, Length: 150mm, ID: 4.6mm, Carbon Load: 15%, pH: 2.5 - 8, Temperature: 80C, USP Phase Code: L1, Phase Category: modified C18, proprietary polar modified and functionally bonded C18

Ultra AQ C18 3um column. Ultra AQ C18 column with Trident Inlet Fitting, Particle Size: 3um, Pore Size: 100A, Spherical, Length: 100mm, ID: 2.1mm, Carbon Load: 15%, pH: 2.5 - 8, Temperature: 80C, USP Phase Code: L1, Phase Category: modified C18, proprietary polar modified and functionally bonded C18

Ultra Carbamate 5um column. Ultra Carbamate column with Trident Inlet Fitting, Particle Size: 5um, Pore Size: 100A, Spherical, Length: 250mm, ID: 4.6mm, pH: 2.5 to 8, Temperature Limit: 80 deg C, For post-column derivatization/fluorescence detection applications

Ultra Amino 5um column. Ultra Amino column with Trident Inlet Fitting, Particle Size: 5um, Pore Size: 100A, Length: 150mm, ID: 4.6mm, Carbon Load: 2%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L8, Phase Category: amino, Ligand Type: aminopropylsilane, for HPLC applications

Ultra Amino 3um column. Ultra Amino column with Trident Inlet Fitting, Particle Size: 3um, Pore Size: 100A, Length: 150mm, ID: 4.6mm, Carbon Load: 2%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L8, Phase Category: amino, Ligand Type: aminopropylsilane, for HPLC applications

Ultra C4 3um column. Ultra C4 column with Trident Inlet Fitting, Particle Size: 3um, Pore Size: 100A, Length: 150mm, ID: 4.6mm, Carbon Load: 9%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, Ligand Type: monomeric C4, for HPLC applications

Ultra C4 3um column. Ultra C4 column with Trident Inlet Fitting, Particle Size: 3um, Pore Size: 100A, Length: 50mm, ID: 2.1mm, Carbon Load: 9%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, Ligand Type: monomeric C4, for HPLC applications

Ultra C4 3um column. Ultra C4 column with Trident Inlet Fitting, Particle Size: 3um, Pore Size: 100A, Length: 50mm, ID: 4.6mm, Carbon Load: 9%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, Ligand Type: monomeric C4, for HPLC applications

Ultra C4 3um column. Ultra C4 column with Trident Inlet Fitting, Particle Size: 3um, Pore Size: 100A, Length: 100mm, ID: 2.1mm, Carbon Load: 9%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L26, Phase Category: C4, butylsilane, Ligand Type: monomeric C4, for HPLC applications

Ultra C1 5um column. Ultra C1 column with Trident Inlet Fitting, Particle Size: 5um, Pore Size: 100A, Length: 50mm, ID: 4.6mm, Carbon Load: 5%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L13, Phase Category: trimethylsilane, Ligand Type: monomeric C1, for HPLC applications

Ultra Silica Column 5 um. Ultra Silica Column, with Trident Inlet Fitting, Particle Size: 5 um, Spherical, Pore Size: 100 Armstrong, Length: 250mm, Internal Diameter: 4.6 mm, No end cap, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, Base-deactivated, For HPLC

Ultra Silica Column 5 um. Ultra Silica Column, with Trident Inlet Fitting, Particle Size: 5 um, Spherical, Pore Size: 100 Armstrong, Length: 150mm, Internal Diameter: 4.6 mm, No end cap, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, Base-deactivated, For HPLC

Ultra Silica Column 5 um. Ultra Silica Column, with Trident Inlet Fitting, Particle Size: 5 um, Spherical, Pore Size: 100 armstrong, Length: 150mm, Internal Diameter: 2.1mm, No end cap, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, Base-deactivated, For HPLC

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 degree C, Length: 150mm, Internal Diameter: 4.6 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 degree C, Length: 150mm, Internal Diameter: 2.1 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 degree C, Length: 150mm, Internal Diameter: 1.0 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 degree C, Length: 50mm, Internal Diameter: 4.6 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 degree C, Length: 50mm, Internal Diameter: 2.1 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 degree C, Length: 50mm, Internal Diameter: 1.0 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 degree C, Length: 30mm, Internal Diameter: 4.6 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 degree C, Length: 30mm, Internal Diameter: 2.1 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 degree C, Length: 200mm, Internal Diameter: 4.6 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 degree C, Length: 200mm, Internal Diameter: 2.1 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 deg C, Length: 100 mm, Internal Diameter: 4.6 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 deg C, Length: 100 mm, Internal Diameter: 2.1 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva Biphenyl Column 5 um. Viva Biphenyl Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 7%, End capped, pH: 2.5 to 8, Temperature: 80 deg C, Length: 100 mm, Internal Diameter: 1.0 mm, USP Phase: L11, Phase Category: phenyl, Ligand Type: unique Biphenyl, For LC-MS analyses

Viva C8 Column 5 um. Viva C8 Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, Carbon Load: 5%, Endcapped, pH: 2.5 to 8, Length: 200 mm, Internal Diameter: 4.6 mm, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, Octylsilane, Ligand Type: monomeric C8, For separating peptide

Viva Silica Column 5 um. Viva Silica Column, Particle Size: 5 um, Spherical, Pore Size: 300 A, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L3, Phase Category: bare silica, Length: 100 mm, Internal Diameter: 4.6 mm, Base-deactivated, For separating peptides or proteins, Normal-phase or HILIC

Pinnacle DB Cyano Column 5um. Pinnacle DB Cyano Column, Particle size: 5um, Spherical, Pore size: 140 A, Carbon load: 4%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 degree C, Length: 250mm, Internal Diameter: 2.1mm, USP Phase Code: L10, Highly base-deactivated, For normal phase or reversed phase

Pinnacle DB Cyano Column 5um. Pinnacle DB Cyano Column, Particle size: 5um, Spherical, Pore size: 140 A, Carbon load: 4%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 degree C, Length: 100mm, Internal Diameter: 2.1mm, USP Phase Code: L10, Highly base-deactivated, For normal phase or reversed phase

Pinnacle DB C18 Column 5 um. Pinnacle DB C18 Column, Particle size: 5um, Spherical, Pore size: 140A, Carbon load: 11%, Endcapped, pH: 2.5-8, Temperature: 80 deg C, Length: 30mm, Internal Diameter: 4.6mm, USP Phase Code: L1, Highly base-deactivated, Phase: Hydrophobic C18, Monomeric C18 bonding

Pinnacle DB C18 Column 5 um. Pinnacle DB C18 Column, Particle size: 5um, Spherical, Pore size: 140A, Carbon load: 11%, Endcapped, pH: 2.5-8, Temperature: 80 deg C, Length: 30mm, Internal Diameter: 2.1mm, USP Phase Code: L1, Highly base-deactivated, Phase: Hydrophobic C18, Monomeric C18 bonding

Pinnacle DB C18 Column 5 um. Pinnacle DB C18 Column, Particle size: 5um, Spherical, Pore size: 140A, Carbon load: 11%, Endcapped, pH: 2.5-8, Temperature: 80 deg C, Length: 200mm, Internal Diameter: 4.6mm, USP Phase Code: L1, Highly base-deactivated, Phase: Hydrophobic C18, Monomeric C18 bonding

Pinnacle DB C18 Column 5 um. Pinnacle DB C18 Column, Particle size: 5um, Spherical, Pore size: 140A, Carbon load: 11%, Endcapped, pH: 2.5-8, Temperature: 80 deg C, Length: 200mm, Internal Diameter: 2.1mm, USP Phase Code: L1, Highly base-deactivated, Phase: Hydrophobic C18, Monomeric C18 bonding

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, Particle Size: 5 um, Spherical, Pore Size: 140 armstrong, No endcap, pH: 2.5 to 8, Temperature: 80 degree C, Length: 150mm, Internal Diameter: 4.6 mm, USP Phase Code: L3, Phase Category: Bare silica, Base-deactivated for normal-phase

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, Particle Size: 5 um, Spherical, Pore Size: 140 armstrong, No endcapp, pH: 2.5 to 8, Temperature: 80 degree C, Length: 150mm, Internal Diameter: 2.1 mm, USP Phase Code: L3, Phase Category: bare silica, Base-deactivated for normal-phase

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, Particle Size: 5 um, Spherical, Pore Size: 140 armstrong, No endcapp, pH: 2.5 to 8, Temperature: 80 degree C, Length: 50mm, Internal Diameter: 4.6 mm, USP Phase Code: L3, Phase Category: Bare silica, Base-deactivated for normal-phase

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, Particle Size: 5 um, Spherical, Pore Size: 140 armstrong, No endcapp, pH: 2.5 to 8, Temperature: 80 degree C, Length: 50mm, Internal Diameter: 2.1 mm, USP Phase Code: L3, Phase Category: Bare silica, Base-deactivated for normal-phase

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, Particle Size: 5 um, Spherical, Pore Size: 140 armstrong, No endcapp, pH: 2.5 to 8, Temperature: 80 degree C, Length: 30mm, Internal Diameter: 4.6 mm, USP Phase Code: L3, Phase Category: Bare silica, Base-deactivated for normal-phase

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, Particle Size: 5 um, Spherical, Pore Size: 140 armstrong, No endcapp, pH: 2.5 to 8, Temperature: 80 degree C, Length: 30mm, Internal Diameter: 2.1 mm, USP Phase Code: L3, Phase Category: Bare silica, Base-deactivated for normal-phase

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, Particle Size: 5 um, Spherical, Pore Size: 140 armstrong, No endcapp, pH: 2.5 to 8, Temperature: 80 degree C, Length: 200mm, Internal Diameter: 4.6 mm, USP Phase Code: L3, Phase Category: bare silica, Base-deactivated for normal-phase

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, Particle Size: 5 um, Spherical, Pore Size: 140 armstrong, No endcapp, pH: 2.5 to 8, Temperature: 80 degree C, Length: 200mm, Internal Diameter: 2.1 mm, USP Phase Code: L3, Phase Category: bare silica, Base-deactivated for normal-phase

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, Particle Size: 5 um, Spherical, Pore Size: 140 armstrong, No endcapp, pH: 2.5 to 8, Temperature: 80 degree C, Length: 100 mm, Internal Diameter: 4.6 mm, USP Phase Code: L3, Phase Category: bare silica, Base-deactivated for normal-phase

Pinnacle DB Silica Column 5 um. Pinnacle DB Silica Column, Particle Size: 5 um, Spherical, Pore Size: 140 armstrong, No endcapp, pH: 2.5 to 8, Temperature: 80 degree C, Length: 100 mm, Internal Diameter: 2.1 mm, USP Phase Code: L3, Phase Category: bare silica, Base-deactivated for normal-phase

Ultra Aqueous C18 HPLC Prep Column 5 um. Ultra Aqueous C18 HPLC Prep Column, High-purity, Type-B silica, Pore Size: 100 armstrong, Particle Size: 5 um, Length: 50 mm, Internal Diameter: 21.2 mm, Carbon Load: 15%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: modified C1

Ultra Aqueous C18 HPLC Prep Column 5 um. Ultra Aqueous C18 HPLC Prep Column, High-purity, Type-B silica, Pore Size: 100 armstrong, Particle Size: 5 um, Length: 50 mm, Internal Diameter: 10 mm, Carbon Load: 15%, pH: 2.5 to 8, Temperature: 80 degree C, USP Phase Code: L1, Phase Category: modified C1

Ultra Aqueous C18 HPLC Prep Column 5 um. Ultra Aqueous C18 HPLC Prep Column, High-purity, Type-B silica, Pore Size: 100 armstrong, Particle Size: 5 um, Length: 100 mm, Internal Diameter: 30 mm, Carbon Load: 15%, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L1, Phase Category: modified C1

Ultra Carbamate Column 5um. Ultra Carbamate Column, Particle size: 3 um or 5 um, Spherical, Pore size: 100 A, pH: 2.5-8, Temperature: 80 deg C, Length: 250mm, Internal Diameter: 4.6mm, Compatible with fluorescence/LC-MS detection, For post-column derivatization/fluorescence detection Applications

Allure Silica Column 5um. Allure Silica Column, Particle size: 5um, Spherical, Pore size: 60 A, Endcap: No, pH : 2.5 to 8, Temperature limit: 80 deg C, Length: 150mm, Internal diameter: 4.6mm, USP Code: L3, Highly retentive phase for normal phase separations. Very high surface area, Type B silica

Allure Silica Column 5um. Allure Silica Column, Particle size: 5um, Spherical, Pore size: 60 A, Endcap: No, pH : 2.5 to 8, Temperature limit: 80 deg C, Length: 150mm, Internal diameter: 2.1mm, USP Code: L3, Highly retentive phase for normal phase separations. Very high surface area, Type B silica

Ultra Cyano HPLC Prep Column 5 um. Ultra Cyano HPLC Prep Column, Particle size: 5 um, Spherical, Pore size: 100 armstrong, Carbon load: 8%, Endcapped, pH: 2.5 to 8, Temperature: 80 deg C, Length: 150mm, ID: 10mm, USP phase code: L10, phase category: cyano, Ligand type: monomeric cyanopropylsilane

Ultra Cyano HPLC Prep Column 5 um. Ultra Cyano HPLC Prep Column, Particle size: 5 um, Spherical, Pore size: 100 armstrong, Carbon load: 8%, Endcapped, pH: 2.5 to 8, Temperature: 80 deg C, Length: 50mm, ID: 30mm, USP phase code: L10, phase category: cyano, Ligand type: monomeric cyanopropylsilane

Ultra Cyano HPLC Prep Column 5 um. Ultra Cyano HPLC Prep Column, Particle size: 5 um, Spherical, Pore size: 100 armstrong, Carbon load: 8%, Endcapped, pH: 2.5 to 8, Temperature: 80 deg C, Length: 50mm, ID: 21.2mm, USP phase code: L10, phase category: cyano, Ligand type: monomeric cyanopropylsilane

Ultra Cyano HPLC Prep Column 5 um. Ultra Cyano HPLC Prep Column, Particle size: 5 um, Spherical, Pore size: 100 armstrong, Carbon load: 8%, Endcapped, pH: 2.5 to 8, Temperature: 80 deg C, Length: 50mm, ID: 10mm, USP phase code: L10, phase category: cyano, Ligand type: monomeric cyanopropylsilane

Ultra Cyano Column 5um. Ultra Cyano Column, High-purity, Particle size: 5um, Spherical, Pore size: 100 A, Carbon load: 8%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 deg C, Length: 30mm, Internal Diameter: 2.1mm, USP Phase Code: L10, Ligand type: Monomeric cyanopropylsilane, phase category: cyano

Ultra Cyano Column 5um. Ultra Cyano Column, High-purity, Particle size: 5um, Spherical, Pore size: 100 A, Carbon load: 8%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 deg C, Length: 200mm, Internal Diameter: 4.6mm, USP Phase Code: L10, Ligand type: Monomeric cyanopropylsilane, phase category: cyano

Ultra Cyano Column 5um. Ultra Cyano Column, High-purity, Particle size: 5um, Spherical, Pore size: 100 A, Carbon load: 8%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 deg C, Length: 200mm, Internal Diameter: 2.1mm, USP Phase Code: L10, Ligand type: Monomeric cyanopropylsilane, phase category: cyano

Ultra Cyano HPLC Prep Column 5 um. Ultra Cyano HPLC Prep Column, Particle size: 5 um, Spherical, Pore size: 100 armstrong, Carbon load: 8%, Endcapped, pH: 2.5 to 8, Temperature: 80 deg C, Length: 100 mm, ID: 30mm, USP phase code: L10, phase category: cyano, Ligand type: monomeric cyanopropylsilane

Ultra Cyano HPLC Prep Column 5 um. Ultra Cyano HPLC Prep Column, Particle size: 5 um, Spherical, Pore size: 100 Armstrong, Carbon load: 8%, Endcapped, pH: 2.5 to 8, Temperature: 80 deg C, Length: 100 mm, ID: 21.2mm, USP phase code: L10, phase category: cyano, Ligand type: monomeric cyanopropylsilane

Ultra Cyano HPLC Prep Column 5 um. Ultra Cyano HPLC Prep Column, Particle size: 5 um, Spherical, Pore size: 100 armstrong, Carbon load: 8%, Endcapped, pH: 2.5 to 8, Temperature: 80 deg C, Length: 100 mm, ID: 10mm, USP phase code: L10, phase category: cyano, Ligand type: monomeric cyanopropylsilane

Ultra Cyano Column 5um. Ultra Cyano Column, High-purity, Particle size: 5um, Spherical, Pore size: 100 A, Carbon load: 8%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 deg C, Length: 100mm, Internal Diameter: 4.6mm, USP Phase Code: L10, Ligand type: Monomeric cyanopropylsilane, phase category: cyano

Ultra Cyano Column 5um. Ultra Cyano Column, High-purity, Particle size: 5um, Spherical, Pore size: 100 A, Carbon load: 8%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 deg C, Length: 100mm, Internal Diameter: 2.1mm, USP Phase Code: L10, Ligand type: Monomeric cyanopropylsilane, phase category: cyano

Ultra Cyano Column 3um. Ultra Cyano Column, High-purity, Particle size: 3um, Spherical, Pore size: 100 A, Carbon load: 8%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 deg C, Length: 150mm, Internal Diameter: 2.1mm, USP Phase Code: L10, Ligand type: Monomeric cyanopropylsilane, phase category: cyano

Ultra Cyano Column 3um. Ultra Cyano Column, High-purity, Particle size: 3um, Spherical, Pore size: 100 A, Carbon load: 8%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 deg C, Length: 50mm, Internal Diameter: 2.1mm, USP Phase Code: L10, Ligand type: Monomeric cyanopropylsilane, phase category: cyano

Ultra Cyano Column 3um. Ultra Cyano Column, High-purity, Particle size: 3um, Spherical, Pore size: 100 A, Carbon load: 8%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 deg C, Length: 30mm, Internal Diameter: 4.6mm, USP Phase Code: L10, Ligand type: Monomeric cyanopropylsilane, phase category: cyano

Ultra Cyano Column 3um. Ultra Cyano Column, High-purity, Particle size: 3um, Spherical, Pore size: 100 A, Carbon load: 8%, Endcapped, pH: 2.5 to 7.5, Temperature: 80 deg C, Length: 30mm, Internal Diameter: 2.1mm, USP Phase Code: L10, Ligand type: Monomeric cyanopropylsilane, phase category: cyano

Ultra C8 HPLC Prep Column 5 um. Ultra C8 HPLC Prep Column, High-purity, Type B silica, Pore Size: 100 A, Particle Size: 5 um, Spherical, Length: 250 mm, Internal Diameter: 21.2 mm, Carbon Load: 12%, End capped, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, Octylsilane

Ultra C8 Column 5um. Ultra C8 Column, Particle size: 5um, Spherical, Pore size: 100A, Carbon load: 12%, End-capped, pH: 2.5-8, Temperature: 80 deg C, USP phase code: L7, phase category: C8, Octylsilane, Ligand: monomeric C8, Length: 250mm, Internal Diameter: 2.1mm, phase category: C8, Octylsilane

Ultra C8 HPLC Prep Column 5 um. Ultra C8 HPLC Prep Column, High-purity, Type B silica, Pore Size: 100 A, Particle Size: 5 um, Spherical, Length: 150 mm, Internal Diameter: 30 mm, Carbon Load: 12%, End capped, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, Octylsilane

Ultra C8 Column 5um. Ultra C8 Column, Retentive, High-purity, Base-deactivated reversed phase, Particle size: 5um, Spherical, Pore size: 100A, Carbon load: 12%, Endcapped, pH: 2.5-7.5, Temperature: 80 deg C, Length: 150mm, Internal Diameter: 4.0mm, USP Phase Code: L7, phase category: C8, Octylsilane

Ultra C8 HPLC Prep Column 5 um. Ultra C8 HPLC Prep Column, High-purity, Type B silica, Pore Size: 100 A, Particle Size: 5 um, Spherical, Length: 50 mm, Internal Diameter: 30 mm, Carbon Load: 12%, End capped, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, Octylsilane

Ultra C8 HPLC Prep Column 5 um. Ultra C8 HPLC Prep Column, High-purity, Type B silica, Pore Size: 100 A, Particle Size: 5 um, Spherical, Length: 50 mm, Internal Diameter: 21.2 mm, Carbon Load: 12%, End capped, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, Octylsilane

Ultra C8 HPLC Prep Column 5 um. Ultra C8 HPLC Prep Column, High-purity, Type B silica, Pore Size: 100 A, Particle Size: 5 um, Spherical, Length: 50 mm, Internal Diameter: 10 mm, Carbon Load: 12%, End capped, pH: 2.5 to 8, Temperature: 80 deg C, USP Phase Code: L7, Phase Category: C8, Octylsilane

Ultra C8 Column 5um. Ultra C8 Column, Particle size: 5um, Spherical, Pore size: 100 A, Carbon load: 12%, Endcapped, pH: 2.5-7.5, Temperature: 80 deg C, Length: 30mm, Internal Diameter: 4.6mm, USP Phase Code: L7, phase category: C8, Octylsilane, Retentive, High-purity, Base-deactivated reversed phase

Ultra C8 Column 5um. Ultra C8 Column, Particle size: 5um, Spherical, Pore size: 100 A, Carbon load: 12%, Endcapped, pH: 2.5-7.5, Temperature: 80 deg C, Length: 30mm, Internal Diameter: 2.1mm, USP Phase Code: L7, phase category: C8, Octylsilane, Retentive, High-purity, Base-deactivated reversed phase

Ultra C8 Column 5um. Ultra C8 Column, Particle size: 5um, Spherical, Pore size: 100A, Carbon load: 12%, Endcapped, pH: 2.5-7.5, Temperature: 80 deg C, Length: 200mm, Internal Diameter: 4.6mm, USP Phase Code: L7, phase category: C8, Octylsilane, Retentive, High-purity, Base-deactivated reversed phase

Ultra C8 Column 5um. Ultra C8 Column, Particle size: 5um, Spherical, Pore size: 100A, Carbon load: 12%, Endcapped, pH: 2.5-7.5, Temperature: 80 deg C, Length: 200mm, Internal Diameter: 2.1mm, USP Phase Code: L7, phase category: C8, Octylsilane, Retentive, High-purity, Base-deactivated reversed phase

Empty Chromatography Column assay 50 mm. Empty Chromatography Column assay, HPLC Assembly, 316 stainless steel tubing complete with end-fitting, Frit, Nut, And ferrule, Internal 1/16in seats are compatible with Valco and Parker fitting, Inner diameter: 2.1 mm, Length: 250 mm, Outer diameter: 1/4in

Empty Chromatography Column assay 50 mm. Empty Chromatography Column assay, HPLC Assembly, 316 stainless steel tubing complete with end-fitting, Frit, Nut, And ferrule, Internal 1/16in seats are compatible with Valco and Parker fitting, Inner diameter: 2.1 mm, Length: 200 mm, Outer diameter: 1/4in

Empty Chromatography Column assay 50 mm. Empty Chromatography Column assay, HPLC Assembly, 316 stainless steel tubing complete with end-fitting, Frit, Nut, And ferrule, Internal 1/16in seats are compatible with Valco and Parker fitting, Inner diameter: 2.1 mm, Length: 50 mm, Outer diameter: 1/4in

Empty Chromatography Column assay 30 mm. Empty Chromatography Column assay, HPLC Assembly, 316 stainless steel tubing complete with end-fitting, Frit, Nut, And ferrule, Internal 1/16in seats are compatible with Valco and Parker fitting, Inner diameter: 3.2 mm, Length: 30 mm, Outer diameter: 1/4in

Deuterium Lamp, 1100 DAD/MWD/1200, for HPLC Systems, Life: 2,000 hours, Compatible with 1260.

Column. Sequant zic-hilic 5um, 200+ 150 x 4.6 mm peek coated HPLC column, ideal choice for separation of polar and hydrophilic compounds. The high-performance, truly zwitterionic stationary phase, ensures reproductible retention of all types of compounds.

Column. Sequant zic-hilic 5um, 200+ 150 x 2.1 mm peek coated HPLC column, ideal choice for separation of polar and hydrophilic compounds. The high-performance, truly zwitterionic stationary phase, ensures reproductible retention of all types of compounds.

Column. Ultra C8 Column, USP L7, 3um particle Size, pore size: 100 A, Endcapped, carbon load: 12%, pH range: 2.5 to 8, temperature limit: 80 Degree C, phase category: C8, octylsilane, ligand type: monomeric C8, Length: 100 mm, Internal Diameter: 4.6 mm, Modification: with Trident Inlet Fitting

Column. Molecular Sieve Column, packed, 5A, ID: 2.1 mm, Length: 3 ft, OD: 1/8in, Material: Stainless Steel Tubing, Mesh: 80/100, Agilent Configuration, For Gas chromatography

Column. ShinCarbon ST Column, packed, ID: 2 mm, Length: 2 m, OD: 1/8in, Material: SilcoSmooth Stainless Steel Tubing, Mesh: 80/100, Maximum temperature of 280 Degree C/300 Degree C, Rapid separations of permanent gas/light hydrocarbon mixtures. For Gas chromatography

Column. Molecular Sieve Column, packed, 5A, ID: 2.1 mm, Length: 6 ft, OD: 1/8in, Material: Stainless Steel Tubing, Mesh: 60/80, General Column Configuration, For Gas chromatography

Column. CarboBlack Packed Columns (On CarboBlack B): 5% Carbowax 20M, Length: 2m, Material: SilcoSmooth, Stationary Phase: 5% Carbowax 20M, Mesh Size: 80/120, 2mm ID, 3.17mm OD, For Agilent Gas chromatography

Inlet Liner, split, 4.0 mm ID Precision with Base Deactivated Wool, Material: Borosilicate Glass, dirty samples, trace samples, ID: 4.0 mm, OD: 6.3 mm, Length: 78.5 mm, For Agilent Gas chromatography

Inlet Liner, 1.0 mm ID Straight, Split, Borosilicate Glass, ID: 1.0 mm, OD: 6.3 mm, for purge & trap inlet splitting or sample 1 uL, Siltek, Length: 78.5 mm, For Agilent Gas chromatography

Inlet Liner, 5.0 mm ID Single Taper, Splitless, Material: Borosilicate Glass, trace samples, ID: 5.0 mm, OD: 8.0 mm, Base Deactivated, Length: 105 mm, For Agilent Gas chromatography

Inlet Liner, 4.0 mm id Single Taper, Splitless, Material: Borosilicate Glass, trace samples 2 ul, Base Deactivated, OD: 6.5 mm, Length: 78.5 mm, For Agilent Gas chromatography

Inlet Liner, 4.0 mm ID Straight with base Deactivated Wool, Splitless, Borosilicate Glass, universal, use with Agilent 7673 autosampler, ID: 4.0 mm, OD: 6.3mm, Length: 78.5 mm, For Gas chromatography

Inlet Liner, 4.0 mm ID Straight, Material: Borosilicate Glass, trace samples 2 uL, ID: 4.0 mm, Length: 78.5 mm, Base Deactivated, OD: 6.5mm, Length: 78.5 mm, For Agilent Gas chromatography equipped with split/splitless inlets

Inlet Liner, 4.0 mm ID Straight with base Deactivated Wool, Splitless, Borosilicate Glass, trace samples 2ul, ID: 4.0 mm, OD: 6.5mm, Length: 78.5 mm, For Agilent Gas chromatography

Inlet Liner, 2.0 mm ID Straight, Splitless, Borosilicate Glass, trace samples 2 ul, ID: 2.0 mm, OD: 6.5 mm, Length: 78.5 mm, Accessory for HPLC and GC

Column. Rtx-5MS-Low-Bleed GC-MS Column, fused silica, Length: 30 m, ID: 0.25 mm, DF: 0.25 um, low-polarity phase; Crossbond diphenyl dimethyl polysiloxane, Temperature range: -60 Degree C to 350 Degree C, with USP G27 and G36 phases.

Column, Gas chomatography, RTX-1 cap. column; Restek; Crossbond 100% dimethyl polysiloxane; Applications includes: DOA, PCB cogeners; 30m; 0.32mm; particle size 1.00um; Inc. 5m Integra-Guard Column

Column. Rtx-1 column (FS), ID: 0.25mm, Film thickness: 0: 25 microns, Temperature limit: -60 To 330/350 Degree C, with 5 m Integra-Guard Column, Length: 30 m, Phase: cross-linked dimethyl polysiloxane, 100%, Non-polar, Application: solvent impurities, PCB congeners, Simulated distillation

Allure Guard Cartridge, 5 microns 10 x 2.1 mm, Accessory for GC and HPLC column, Pack of 3.

Column. Viva C4 Column, particle size: 5 um, spherical, end-capped, pore size: 300 A, carbon load: 3.5%, pH range: 2.5 to 8, temperature limit: 80 Degree C, USP phase code: L26, phase category: C4, butylsilane, ligand type: monomeric C4, Length: 150 mm, ID: 2.1 mm

Column. Allure Organic Acids Column, particle size: 5um, spherical, non-endcapped phase pore size: 60A, pH range: 2.5 to 7.5, temperature limit: 80 Degree C, Dimension: 300mm x 4.6mm, for Fruit Juice Organic Acid Mixture sample

Column. MXT-200 Capillary Column, Siltek-treated stainless steel, Film: 1 um, inner diameter 0.53 mm, Column Description: MXT, Packing: Trifluorpropylmethylpolysiloxan, Length: 15 m, Temperature range: -20 Degree C to 400 Degree C, Equivalent to USP G6 phase.

Column. MXT-1 Column, Siltek-treated stainless steel, nonpolar phase; Crossbond dimethyl polysiloxane, Temp. Limits: -60 to 250/360 Degree C, Length: 60 m, Internal Diameter: 0.53 mm, df (um): 7.00 um, with USP G1, G2, G38 phases, 4.5in standard coil diameter.

Column. MXT-1, Crossbond 100% dimethyl polysiloxane, 60m length, 0.53mm, particle size 1.00um, no cage, USP type: G1, G2, G38, Material: Stainless Steel, Temperature range: -60 to 320/360 Degree C, Application includes solvent impurities, PCB congeners

Colume. MXT-1 Silcosteel Capillary Columns - 15m Length, Siltek-treated stainless steel, 0.25mm I.D.; 1.00microm df; Temp. Limits: -60 to 340 deg. C (-76 to 644 deg. F), Technique: Crossbond, Stationary Phase: 100% Dimethyl Polysiloxane, Without coil

Column. Rtx-1701 Column, fused silica, Temperature Limits: -20 to 280 Degree C, Length: 40 m, Internal Diameter: 0.18 mm, df (um): 0.20 um, midpolarity Crossbond phase, General-purpose columns for alcohols, oxygenates, PCB congeners (e.g. Aroclor mixes), pesticides, and fragrance compounds.

Sample Delivery System. Resprep Sample Delivery System, Compatible with Resprep 1, 3, 6, and 15 mL SPE cartridges and Diskcover-47 extraction disk holder, Six PTFE transfer lines (1/8in OD x 1/16in ID x 36in long); each is banded with a different color for easy sample identification

Ottawa Sand (Bulk Adsorbent), Sample medium for matrix spikes and laboratory control blanks. Packaged in convenient 5 kg buckets.

Cartridge. Resprep CarboPrep SPE Cartridge, Volume: 6 mL, 500 mg, Packing: CarboPrep 90, Improved recovery of sulfonylurea herbicides, phenols, carbamates, and triazine herbicides, compared to C18 and C8 cartridges. Maximum capacity for contaminant cleanup.

SPE cartridge, Volume: 6 mL, 2 g, For use in EPA Method 521: Nitrosamines in drinking water and EPA methodology 522 for 1, 4-dioxane in drinking water. Activated charcoal packing.

Dampener. Mini Pulse Dampener, Small, 160 ul dead volume at atmospheric pressure. Compact unit (2.5 & Prime, x 1.5 & Prime), PEEK unit can withstand Pressures to 5, 000 psi (34, 474 kPa). 316 Stainless Steel unit can withstand Pressures to 6, 000 psi (41.369 kPa).

Cabinet. HPLC-30 Column Storage Cabinet, Size: 17 x 15 x 3 in, Made from solid, durable PVC. Saves space and protects columns.

Empty Chromatography Column, HPLC Column Assembly, Diameter Outer: 0.25mm, Diameter Inner: 2.1mm, Includes End fittings, frits, nuts and ferrules, Material: 316 Stainless Steel, Length: 150mm

Empty Chromatography Column, HPLC Column Assembly, Diameter Outer: 0.25mm, Diameter Inner: 2.1mm, Includes End fittings, frits, nuts and ferrules, Material: 316 Stainless Steel, Length: 100mm

UltraLine Replacement Filter, 0.5 um stainless steel filter.

Filter. UltraLine UHPLC Filter, 1, 034 bar 15, 000 psi, Replaceable 0.5um stainless steel frit and case In-Line holder

Autosampler Vial Convenience kit. Autosampler Vial Convenience Kit, 8 mm, Includes: Amber 2.0 mL Vial, Silcote Deactivated, Black Cap, Red PTFE/Silicone Septa, 0.065in, Preassembled Cap with septa packaged separately in a plastic bag.

Insert, with Bottom Spring, Volume: 100ul, Material: Polypropylene, for 2.0 mL, 8 mm Screw-Thread Vials

Closure, Screw-Vial, 2.0 mL, 9 mm Short-Cap, Liner, Polypropylene, Preassembled, Color: Red, Septa Material: PTFE/Silicone/PTFE

Closure, Screw-Vial, 2.0 mL, 9 mm Short-Cap, Liner, Polypropylene, Preassembled, Color: Yellow, Septa Material: PTFE/Silicone

Seal. Dual Vespel Ring Inlet Seal, ID: 0.8 mm, Material: Gold-Plated, Washerless, Leak-Tight Seals for Agilent Gas chromatography

Tube End Reducer, Size: 1/4in to 1/8in, Material: Brass, Accessory for gas chromatography, Pack 5.

Capillary Dedicated FID Replacement Jet, Length: 43 mm, High-Temperature, 0.018-Inch ID Tip, with standard, high-temperature, or Siltek treated high-performance versions. For Agilent 5890/6890/6850/7890 Gas chromatography

Gas Sampling Bag. ALTEF Gas Sampling Bag, Modification: Polypropylene Combo Valve and Septum, Volume: 1 L, Size: 7in x 7in, Contain no additives, fillers, or pigments. Composition: proprietary PVDF film Thickness: 0.003in, Tensile Strength: 6, 100 psi, Specific Gravity: 1.78 g/mL

Gas Sample Loop, Material: Sulfinert-Treated, Volume: 25 uL, 1/16in fittings, 1 mm ID, for W Type valves, for samples containing low concentrations of sulfur or other active compounds. Sample loop sizes from 5 uL to 5 mL.

Dynamic Duo (Leak Detector and ProFLOW 6000 Flowmeter), Operating Temperature Range: 32-120 Degree F (0-48 Degree C) Humidity Range: 0-97%, improves data quality, for leaks and verifying flows, Volumetric Battery: 2-AA

Connector. Female Connector, Brass, Stainless Steel & Treated, Swagelok, Size: 1/8in to 1/4in NPT, Material: Silcosteel-CR Treated

Gas-Specific Purifier Module. VICI Mat/Sen Gas-Specific Purifier Module, Nitrogen Purifier Fittings: Compression Tube Fittings 1/8in, Max Pressure: 1000psi, 6895kPa, Reduce gas impurities from ppm to low ppb levels.

Zero Dead Volume Union (Treated), Valco, Size: 1/16in, Material: Siltek/Sulfinert Treated.

FID Jet Removal Tool, Securely grips jet in socket for easy removal or installation. Unique, ergonomic handle-easy to hold, for Agilent 5890/6850/6890/7890 FIDs

Viton O-Rings, for gas chromatography, Fit split (6.3 mm OD) or splitless (6.5 mm OD) liners, 300C.

Inlet Maintenance Kit, for gas chromatography, Includes the most common consumable GC supplies and tools

Sampling Bag. Tedlar Sampling Bags, Polypropylene Valve and Septum Fitting, 0.5 L, 6x 6inch, Find the bags you need-we offer sizes from 0.5 L to 100 L, Unique all-in-one septum and valve fitting make these lightweight and easy to use, pack10

Replacement, charcol, Ultra-High Capacity Hydrocarbon Filter, for chromatography.

Filter Catridge. Super Clean Ultra-High Capacity Oxygen Filter cartridges feature easy-to-read indicators, All traps measure: 10 5/8x 1 3/4inch (27 x 4.4 cm)

Filter cartridge. Super Clean ultra-high capacity moisture filter cartridges feature easy-to-read indicators, The indicator code is shown on every trap so there is no confusion determining when a trap needs to be replaced, All traps measure: 10 5/8x 1 3/4inch (27 x 4.4 cm)

Column Nut. Capillary Column Nuts, for gas chromatography, Available in brass or stainless steel, for use wit ferrule, Designed to fit a wider variety of 1/16inch ferrules

Sampling Vial. Precleaned Volatile Organic Analyte (VOA) Sampling Vials, Container, liner, and closure cleaned, assembled, and lot traceable, Open-top cap, PTFE faced 0.125inch silicone septa, Cleaned to U.S. EPA Protocol B specifications, 20Ml.Amber, glass, 24 mm/400, pack72

Sampling Vial. Precleaned Volatile Organic Analyte (VOA) Sampling Vials, Container, liner, and closure cleaned, assembled, and lot traceable, Open-top cap, PTFE faced 0.125inch silicone septa, Cleaned to U.S. EPA Protocol B specifications, 40Ml, Clear, glass, 24 mm/400, pack72

Cap and Septa, preassembled, Fit all 2.0 Ml, 12 x 32 mm, screw-thread 8 mm/425 vial-based autosamplers, black, Red PTFE/Silicone, 0.065inch

FID Jet. Capillary Dedicated FID Jet for gas chromatography, Fluted tip guides the capillary column into the jet, 0.011inch, pack3

FID Jet. Capillary Dedicated FID Jet for gas chromatography, Fluted tip guides the capillary column into the jet, standared, 0.011inch

Instalation gauge. Capillary instalation gauge, for gas chromatography, Prevents crushed column ends, Stainless-steel, For 1/16 in. ferrule fittings

Connector Kit, MXT Y-Connector Kits for 0.25mmID Fused Silica Columns.

Connector Kit, MXT Connector for 0.25mmID Fused Silica Columns.

Regulator Manifold, Stainless Steel CGA 580 (N2, He, Ar) Protocol Station for Single or Dual Stage Regulators

Liner. Solid-phase microextraction Liner, 0.75mm x 6.35 x 78.5 for gas chromatography, Intermediate-Polarity Deactivated

Vu2 Union, Fits 0.45/0.53mm ID Columns.

Uniliner, 1MM X 6.3 X 78.5 for gas chromatory, Intermediate-Polarity Deactivated.

Ferrules, for EZ No-Vent GC Column-MS Connectors, 1/16inch, Virgin Polyimide, 0.30G0.40 mm.

Inlet Liner. Precision Inlet Liner with Wool, 2.0 mm, For Gas chromatography equipped with split and splitless inlets, 2.0 mm, 78.5 mm, 6.3 mm, Borosilicate Glass, Deactivated Wool

Electrolyte solution for model 75-32 75-34 75-36 H2PD-150 H2PD-300, Hazardaus free, 250Ml.

Connector. Universal Y Press-Tight Connectors, alternative method of performing dual-column confirmational analyses, Split sample flow onto two columns-perform confirmation analysis with a single injection, Split a single column flow to two detectors, Fit 0.33-0.74 mm OD columns

Connector. Universal Press-Tight Connectors, Connect a guard column to an analytical column, Repair a broken column, Connect a column outlet to a transfer line, Connect a guard column to an analytical column, Fit 0.33-0.74 mm OD columns

Inlet Cross-Disk Seal. Siltek Replacement Inlet Cross-Disk Seal for gas chromatography, include washers, Ideal for high-flow split application, 0.8mm, pack10

Wrench Set. Open-End Wrench Set, High-quality 1/4x 5/16inch, 3/8x 7/16inch, 7/16x 1/2inch, and 1/2x 9/16inch wrenches for tightening a wide variety of chromatography fittings

Inlet Liner Packing Tool, Position wool reproducibly every time, Accurate to a specific, measured depth, Can be used with all manufacturers' liners, Position wool reproducibly every time

Ferrule. GRAPHPACK 3D/2 Ferrules, 0.4 mm, 0.25 mm, quickly and reliably makes a leak-tight, low-dead-volume connection. The central component is a metal-jacketed graphite ferrule-the ideal seal for GC applications.

Tubing Burring and Reaming Tool, Removes burrs and reams tubing, 1/8inch.

Adaptor Ferrule. Valco Adaptor Ferrules, 1/32-Inch, 0.32 mm, 0.40-0.50 mm, prepared to maximize mechanical stability at temperatures to 350C. The determining factor for selecting adaptor ferrule size is the fused silica tubing OD.

Column. Rtx -BAC2 Columns, fused silica, 1.20 um, 0.32 mm, 30 m, -20 to 240/260C, provides four elution order changes under the same conditions, for blood alcohol analysis-achieve baseline resolution in less than 3 minutes

Sampling Bag. Tedlar Sampling Bags, Polypropylene Valve and Septum Fitting, 10 L, 11.75x 22inch, Unique all-in-one septum and valve fitting make these lightweight and easy to use, Unique all-in-one septum and valve fitting make these lightweight and easy to use

Column. Rtx -Biodiesel TG Columns, fused silica, Linearity for all reference compounds exceeds method requirements, Low column bleed at high temperatures, Temperature Limits:to 330/380C, 15 m, 0.32 mm, 0.10 um, with 2 m x 0.53 mm ID Retention Gap

Column. Rxi Guard/Retention Gap Columns, fused silica, Extend column lifetime, Excellent inertness-obtain lower detection limits for active compounds, 0.25 mm, 0.37 +/- 0.04 mm, 5 m, Excellent inertness-obtain lower detection limits for active compounds.

Column. Siltek-Deactivated Guard/Retention Gap Columns/Transfer Lines, Tested with a comprehensive test mix, to ensure high inertness, 5 m, 0.25 mm, 0.37 +/- 0.04 mm, Revolutionary deactivation process for superior inertness.

Column. Rtx -CLPesticides2 Columns, fused silica, Application-specific columns for organochlorine pesticides and herbicides, Low bleed-ideal for high sensitivity GC-ECD or GC-MS analyses.Length:30 m, Internal Diameter:0.25 mm, 0.20 um

Column. Rtx -CLPesticides Columns, fused silica, Application-specific columns for organochlorine pesticides and herbicides, Low bleed-ideal for high sensitivity GC-ECD or GC-MS analyses, Length:30 m, Internal Diameter:0.25 mm, 0.25 um

Column. Rtx -1301 (G43) Columns, fused silica, General-purpose columns for residual solvents, alcohols, oxygenates, and volatile organic compounds, Temperature range: -20C to 280C.Equivalent to USP G43 phase, Length:30 m, Internal Diameter:0.32 mm, 1.80 um

Column. Rtx -1301 (G43) Columns, fused silica, General-purpose columns for residual solvents, alcohols, oxygenates, and volatile organic compounds, Temperature range: -20C to 280C, Equivalent to USP G43 phase, Length:60 m, Internal Diameter:0.25 mm, 1.40 um

Pressure Relief Valve for ASE Extraction Sytem 100/200/300.

O-Ring. Filter/O-Ring Insertion Tool 2-in-1 for ASE Extraction system 100/200/300 (includes Resprep Tool Handle and Filter Insertion Attachments), Fits all extraction cells, except 1 mL size

Retaining Ring Pliers for ASE Extraction System 100/200/300.

O-Rings for ASE 200 and ASE 300 Extraction System Caps, Pk100.

Filter 30 mm for ASE 100/300 Extraction Cells, Glass Fiber.

Sample Collection Bottles for ASE 100/300 Systems, 250mL, Clear, Glass.

SPE Cartridge. Method Specific SPE Cartridge, High-capacity cleanup of butyl and phenyl tin compounds from soil, water, and biota. Mixed bed, Method:Organo Tin, Volume: 60 mL

PEEK Washers for ASE 200 Extraction Unit Pk48.

PEEK Washers for ASE 100/300 Extraction Unit Pk12.

PEEK Washers for ASE 100/300 Extraction Unit Pk48.

Resprep SPE Empty Tubes, polypropylene, 15ml.

Resprep Resin SPE Disks, 47 mm glass fiber embedded with styrene/DVB resin.

Resprep Bonded Reversed Phase SPE Cartridge, 20 mL, 5 g, Packing: C18 (high load, endcapped).

Sample Guide Needles for Resprep SPE Manifolds 12 or 24-Port.

Valves(Manifold Lid ) for Resprep SPE Manifolds 12 or 24-Port.

Method Specific SPE Cartridge, Method: RDX, Volume: 6 mL, 500 mg, Extraction of explosive compounds.

Replacement Extraction Cell End Caps for ASE 200 Extraction Unit, Stainless Steel, pk10.

Filter, 20mm, for ASE 200 Extraction Unit, Cellulose, Fit 11 mL, 22 mL, and 33 mL cells.

Filter, 20mm, for ASE 200 Extraction Unit, Glass Fiber, Fit 11 mL, 22 mL, and 33 mL cells.

FAMEWAX Temperature Limits:20 to 240/250 Degree Celsius, 30m, 0.25mm ID, 0.25um.

Peek tip for Waters-style end fittings, Replacement.

Aldehyde-Ketone-DNPH, TO-11A Calibration Mix, 1mL, 15ug/mL, Acetonitrile 1 mL/ampule.

ZIC-HILIC (3.5um,100angstrom) PEEK 150x2.1. Metal-free HPLC column

Zic-Hilic (3.5Um,100 Angstrom) Peek 150X2.1.

REACTI-BLOCK Q-1, Holds 8 x 10 ml Reacti-Vials; 8 holes/26 mm dia. x 46 mm deep.

Reacti-probe (tm) Remote temperature sensor.

Reacti-vap(tm) evaporator, 9-port07.

Reacti-Therm Thermometer 0-200 degree C.

Column. Caplillary Column, RTX-Dioxin2, Length: 60 m, Internal Diameter: 0.25mm, DF: 0.25um, Thermally stable to 340 DegreeC for longer lifetime.

Ferrule, Standard-for 1/16inch Fittings, Material: Graphite.

O-Ring. Material: Graphite, for Shimadzu 2010 and 2014 GCs, for Split Liners, Maximumium Temperature : 450 DegreeC

Column, Material: Silicone, Maximumimum Temperature: 250 DegreeC, Instrument: for PerkinElmer Auto SYS XL or Clarus with CAP Injector

Split/Splitless Injection Port, Material: Siltek Treated.

Ferrule. Capillary, Ferrule ID: 0.3mm, Material: Vespel/ Graphite, Fitting Size: 1/16inch, for 1/16-Inch Compression-Type Fittings

Ferrule ID: 0.5mm, Material: Graphite, Fitting Size: 1/16inch, Fit 0.32mm ID Fused Silica Column

Ferrule ID: 0.8mm, Material: Graphite, Fitting Size: 1/16inch, Fit 0.45/0.53mm ID Fused Silica Column

Ferrule. Size: 1/16inch, Material: Stainless Steel, for connecting fused silica or 1/16- or 1/8-inch metal tubing.

Nut. Size: 1/16inch, Material: Stainless Steel, for connecting fused silica or 1/16- or 1/8-inch metal tubing.

Seal, Liner, Material: Graphite, ID: 5mm, Max Temp: 450 DegreeC, for Bruker/Varian 1078/1079 GC.

Split/Splitless Injection Port, Direct Replacement or Siltek Treated.

Pump Oil. Rough, number19, Formulated from crude oil stocks known for their durability and line-lubricating qualities.

Syringe Filter. Material:, Diameter: 4mm, Porosity: 0.22um, Color: purple, with Luer Lock Inlet, 100-pk

Syringe Filter. Material:, Diameter: 4mm, Porosity: 0.45um, Color: green, with Luer Lock Inlet, 100-pk

Autosampler Syringe. SGE 50F-PE-0.63, Volume: 0.5uL, Gauge: 26, Termination: F, Length: 70mm, Point Style: Cone, for PerkinElmer Autosystem and Clarus 500 GCs

Needle and Plunger Replacement kit, 033765 SGE, Volume: 0.5uL, Termination: R, Gauge: 23, Length: 70mm, Point Style: Cone, for Autosampler Syringes

Syringe Needle. Model no: 033715 SGE, Replacement, Volume: 0.5uL, Gauge: 23, Length: 42mm, Point Style: Cone, for 7673, 7683, 7693A, and 6850 Autosampler Syringes

Ferrule, Material: Graphite, Ferrule ID: 0.4mm, Fits Column ID: 0.25mm and less, for Shimadzu GCs.

Ferrule, Material: Graphite, Ferrule ID: 0.5mm, Fits Column ID: 0.32mm and less, for Shimadzu GCs.

Tube. Q-sep QuEChERS dSPE, Volume: 15 mL, Material: 900 mg MgSO4, 150 mg PSA, for Extract Cleanup, Preweighed, uLtra-pure sorbents, Ready-to-use tubes, no glassware required.

Tube. Q-sep QuEChERS dSPE, Volume: 15 mL, Material: 900 mg MgSO4, 150 mg PSA, 45 mg GCB, for Extract Cleanup, Preweighed, uLtra-pure sorbents.

Premium Non-stick BTO Septa, Diameter: 9mm CenterGuide, for Bruker/Varian 1177 Injectors, 50pack.

Premium Non-stick BTO Septa, Diameter: 9mm CenterGuide, for Bruker/Varian 1177 Injectors, 100PACK.

Premium Non-stick BTO Septa. Diameter: 11mm CenterGuide, New plasma coating eliminates sticking in the injection port, 50PACK

Premium Non-stick BTO Septa. Diameter: 11mm CenterGuide, New plasma coating eliminates sticking in the injection port, 100PACK

Premium Non-stick BTO Septa, Diameter: 11.5mm CenterGuide, for Tracor 540 GCs, 50PACK.

Premium Non-stick BTO Septa. Diameter: 17mm CenterGuide, New plasma coating eliminates sticking in the injection port, 50PACK

Premium Non-stick BTO Septa, Diameter: 12.7mm CenterGuide, for Tracor 220, 222 GCs, 50PACK.

Mass Spec Cleaning Kit with Dremel Tool.

PFTBA (MS Tuning Compound), Restek - 30482, 1 ml/Ampule, Perfluorotributylamine (PFTBA)

Kit, LC OQ Linearity Test Mix, Concentration In Solvent and Volume: 1 mL each of these mixtures.

Standard. FID Performance Evaluation, Concentration In Solvent and Volume: 0.03 w/w% each in hexane, 1 mL/ampule

Polywax 655, Polywax Standards, CAS number: 9002-88-4, Conc. In Solvent and Volume: Neat, 1 gram.

Column. Caplillary Column, RTX-1, Length: 10 m, Internal Diameter: 0.18mm, DF: 0.20um, Temperature range: -60 to 330/350 DegreeC

Column. Caplillary Column, RTX-1, Length: 10 m, Internal Diameter: 0.18mm, DF: 0.40um, Temperature range: -60 to 330/340 DegreeC

Column. Caplillary Column, RTX-1, Length: 10 m, Internal Diameter: 0.18mm, DF: 0.40um, Temperature range: -60 to 315/330 DegreeC

Column. Caplillary Column, RTX-1, Length: 40 m, Internal Diameter: 0.18mm, DF: 0.40um, Temperature range: -60 to 330/340 DegreeC

Column. Caplillary Column, RTX-1, Length: 20 m, Internal Diameter: 0.18mm, DF: 0.40um, Temperature range: -60 to 330/340 DegreeC

Column. Caplillary Column, RTX-1, Length: 20 m, Internal Diameter: 0.18mm, DF: 0.40um, Temperature range: -60 to 315/330 DegreeC

Column. Caplillary Column, RTX-624, Length: 20 m, Internal Diameter: 0.18mm, DF: 1.00um, Temperature range: -20 DegreeC to 240 DegreeC.

Column. Caplillary Column, RTX-1, fused silica, Length: 10 m, Internal Diameter: 0.10mm, DF: 0.10um, Temp. Limits: -60 to 330/350 DegreeC

Column. Caplillary Column, RTX-1, fused silica, Length: 10 m, Internal Diameter: 0.10mm, DF: 0.40um, Temp. Limits: -60 to 320/340 DegreeC

Column. Caplillary Column, RTX-1, fused silica, Length: 20 m, Internal Diameter: 0.10mm, DF: 0.10um, Temp. Limits: -60 to 330/350 DegreeC

Column. Caplillary Column, RTX-1, fused silica, Length: 20 m, Internal Diameter: 0.10mm, DF: 0.40um, Temp. Limits: -60 to 320/340 DegreeC

Column. Caplillary Column, RTX-1, fused silica, Length: 10 m, Internal Diameter: 0.10mm, DF: 0.10um, Temp. Limits: -60 to 330/350 DegreeC

Column. Caplillary Column, RTX-1, fused silica, Length: 20 m, Internal Diameter: 0.10mm, DF: 0.10um, Temp. Limits: -60 to 330/350 DegreeC

Column, PINNACLE DB PFP Propyl, Particle Size: 3um, Length: 30mm, Internal Diameter: 2.1mm

Column, PINNACLE DB PFP Propyl, Particle Size: 3um, Length: 50mm, Internal Diameter: 2.1mm

Column, PINNACLE DB PFP Propyl, Particle Size: 3um, Length: 50mm, Internal Diameter: 4.6mm

Column, PINNACLE DB PFP Propyl, Particle Size: 3um, Length: 150mm, Internal Diameter: 4.6mm

Column, PINNACLE DB PFP Propyl, Particle Size: 3um, Length: 150mm, Internal Diameter: 2.1mm

Column, PINNACLE DB PFP Propyl, Particle Size: 5um, Length: 100mm, Internal Diameter: 2.1mm

Column, PINNACLE DB PFP Propyl, Particle Size: 5um, Length: 100mm, Internal Diameter: 4.6mm

Column, PINNACLE DB PFP Propyl, Particle Size: 5um, Length: 200mm, Internal Diameter: 4.6mm

Column, PINNACLE DB PFP Propyl, Particle Size: 5um, Length: 150mm, Internal Diameter: 2.1mm

Column, PINNACLE DB PFP Propyl, Particle Size: 5um, Length: 50mm, Internal Diameter: 2.1mm

Column, PINNACLE DB PFP Propyl, Particle Size: 5um, Length: 150mm, Internal Diameter: 4.6mm

Column, PINNACLE DB PFP Propyl, Particle Size: 5um, Length: 250mm, Internal Diameter: 2.1mm

Column, PINNACLE DB PFP Propyl, Particle Size: 5um, Length: 250mm, Internal Diameter: 4.6mm

Column, VIVA C4, Particle Size: 5um, Length: 250mm, Internal Diameter: 4.6mm, Excellent for separating peptides or proteins.

Column, RXI Guard/Retention Gap, Nominal ID: 0.53mm, Nominal OD: 0.69 +/- 0.05mm, Length: 5 m

Column. Capillary Column, RXI-5SIL MS, Length: 30 m, ID: 0.25mm, DF: 0.25um, Temperature range: -60 DegreeC to 330/350 DegreeC

Liner. Straight Inlet, 2.0mm ID, Length: 86.2mm, OD: 4mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, for Auto SYS and Clarus GCs equipped with split/splitless inlets

Column. Capillary Column, RXI-5SIL MS, Length: 30 m, ID: 0.25mm, DF: 0.50um, Temperature range: -60 DegreeC to 330/350 DegreeC, with 10 m Integra-Guard Column

Column, MOLESIEVE 5A, Length: 2 m, ID: 2.0mm, OD: 1/8inch, Material: SilcoSmooth Tubing, Mesh: 60/80, Molecular sieve packed Column easily separate permanent gases at above-ambient temperatures.

Column. Porous Polymer, Length: 6 feet, OD: 1/8inch, Material: Stainless Steel Tubing, ID: 2.1mm, 80/100 Mesh.

Column, MOLESIEVE 5A, Length: 6 feet, ID: 2.0mm, OD: 1/8inch, Material: Stainless Steel Tubing, Mesh: 60/80, Molecular sieve packed Column easily separate permanent gases at above-ambient temperatures.

Column, MOLESIEVE 5A, Length: 6 feet, ID: 2.1mm, OD: 1/8inch, Material: Stainless Steel Tubing, Mesh: 80/100, Molecular sieve packed Column easily separate permanent gases at above-ambient temperatures.

Column, MOLESIEVE 5A, Length: 6 feet, ID: 2.1mm, OD: 1/8inch, Material: Stainless Steel Tubing, Mesh: 60/80, Molecular sieve packed Column easily separate permanent gases at above-ambient temperatures.

Column, RTX-5 Amine, fused silica, Length: 30 m, Internal Diameter: 0.25mm, DF: 0.25um, Application-specific Column for amines and other basic compounds, including alkylamines, diamines, triamines, ethanolamines, and nitrogen-containing heterocyclics.

Column, FAMEWAX, USP G16, fused silica, Length: 30 m, Internal Diameter: 0.32mm, DF: 0.25um, Application-specific Column for FAMEs, specially tested with a FAME mixture

Column. Capillary Column, RXI-17, Length: 20 m, ID: 0.18mm, DF: 0.18um, Temperature range: 40 DegreeC to 320 DegreeC, General-purpose Column for pesticides, herbicides, rosin acids, phthalate esters, triglycerides, sterols.

Column. Capillary Column, RXI-17, Length: 15 m, ID: 0.25mm, DF: 0.25um, Temperature range: 40 DegreeC to 320 DegreeC, General-purpose Column for pesticides, herbicides, rosin acids, phthalate esters, triglycerides, sterols.

Column. Capillary Column, RXI-17, Length: 30 m, ID: 0.25mm, DF: 0.25um, Temperature range: 40 DegreeC to 320 DegreeC, General-purpose Column for pesticides, herbicides, rosin acids, phthalate esters, triglycerides, sterols.

Column. Capillary Column, RXI-17, Length: 30 m, ID: 0.32mm, DF: 0.25um, Temperature range: 40 DegreeC to 320 DegreeC, General-purpose Column for pesticides, herbicides, rosin acids, phthalate esters, triglycerides, sterols.

Column. Capillary Column, RXI-17, Length: 30 m, ID: 0.25mm, DF: 0.50um, Temperature range: 40 DegreeC to 320 DegreeC, General-purpose Column for pesticides, herbicides, rosin acids, phthalate esters, triglycerides, sterols.

Column. Capillary Column, RXI-17, Length: 30 m, ID: 0.53mm, DF: 1um, Temperature range: 40 DegreeC to 320 DegreeC, General-purpose Column for pesticides, herbicides, rosin acids, phthalate esters, triglycerides, sterols.

Column. Capillary Column, RXI-5Sil MS, Length: 30 m, ID: 0.32mm, DF: 0.25um, Temperature range: -60 DegreeC to 350 DegreeC, General-purpose Column-ideal for GC-MS analysis of semivolatiles, polycyclic aromatic compounds, chlorinated hydrocarbons, phthalates, phenols, amines

Column. Capillary Column, RXI-5Sil MS, Length: 30 m, ID: 0.53mm, DF: 1.50um, Temperature range: -60 DegreeC to 350 DegreeC, General-purpose Column-ideal for GC-MS analysis of semivolatiles, polycyclic aromatic compounds, chlorinated hydrocarbons, phthalates, phenols, amines

Column. Capillary Column, RXI-XLB, Length: 15 m, ID: 0.25mm, DF: 0.10um, Temperature range: 30 DegreeC to 360 DegreeC, General-purpose Column-ideal for GC-MS analysis of semivolatiles, polycyclic aromatic compounds, chlorinated hydrocarbons, phthalates, phenols, amines

Column. Capillary Column,, RXI-XLB, Length: 30 m, ID: 0.25mm, DF: 0.25um, Temperature range: 30 DegreeC to 360 DegreeC, General-purpose Column exhibiting extremely low bleed. Ideal for many GC-MS applications, including pesticides, PCB congeners (e.g., Aroclor mixes), PAHs

Column. Capillary Column,, RXI-XLB, Length: 30 m, ID: 0.25mm, DF: 1um, Temperature range: 30 DegreeC to 360 DegreeC, General-purpose Column exhibiting extremely low bleed. Ideal for many GC-MS applications, including pesticides, PCB congeners (e.g., Aroclor mixes), PAHs

Column. Capillary Column,, RXI-35Sil MS, Length: 15 m, ID: 0.25mm, DF: 0.25um, Extended temperature range: 50 DegreeC to 340/360 DegreeC, Special selectivity and excellent ineRTness for substituted polar compounds, such as drugs, pesticides, herbicides, PCBs, phenols, etc

Column. Capillary Column,, RXI-35Sil MS, Length: 30 m, ID: 0.25mm, DF: 0.25um, Extended temperature range: 50 DegreeC to 340/360 DegreeC, Special selectivity and excellent ineRTness for substituted polar compounds, such as drugs, pesticides, herbicides, PCBs, phenols, etc

Column. Capillary Column,, RXI-17Sil MS, Length: 20 m, Internal Diameter: 0.18mm, DF: 0.18um, 340/360 DegreeC upper temperature limits.

Column. Capillary Column,, RXI-17Sil MS, Length: 15 m, Internal Diameter: 0.25mm, DF: 0.25um, 340/360 DegreeC upper temperature limits.

Column. Capillary Column,, RXI-17Sil MS, Length: 30 m, Internal Diameter: 0.32mm, DF: 0.25um, 340/360 DegreeC upper temperature limits.

Column. Capillary Column,, RXI-17Sil MS, Length: 60 m, Internal Diameter: 0.25mm, DF: 0.25um, 340/360 DegreeC upper temperature limits.

Column, RTX-200MS-Low-Bleed GC-MS Column, Length: 30 m, Internal Diameter: 0.25mm, DF: 0.25um, Temperature range: -20 DegreeC to 340 DegreeC

Column, RTX-200MS-Low-Bleed GC-MS Column, Length: 30 m, Internal Diameter: 0.25mm, DF: 0.50um, Temperature range: -20 DegreeC to 340 DegreeC

Column, RTX-200MS-Low-Bleed GC-MS Column, Length: 30 m, Internal Diameter: 0.25mm, DF: 1um, Temperature range: -20 DegreeC to 340 DegreeC

Column, RTX-200MS-Low-Bleed GC-MS Column, Length: 30 m, Internal Diameter: 0.32mm, DF: 1um, Temperature range: -20 DegreeC to 340 DegreeC

Column, RTX-BAC Plus 1, Length: 30 m, Internal Diameter: 0.32mm, DF: 1.80um, Optimized column selectivities guarantee resolution of ethanol, internal standards, and frequently encountered interferences.

Column, RTX-BAC Plus 1, Length: 30 m, Internal Diameter: 0.32mm, DF: 0.6um, Optimized column selectivities guarantee resolution of ethanol, internal standards, and frequently encountered interferences.

Column, RTX-BAC Plus 1, Length: 30 m, Internal Diameter: 0.53mm, DF: 1.0um, Optimized column selectivities guarantee resolution of ethanol, internal standards, and frequently encountered interferences.

Column, RTX-Volatile Amine, Length: 15 m, Internal Diameter: 0.32mm, Temperature Limits: -60 to 270/290 DegreeC, Unique selectivity for baseline resolution of all volatile amines.

Column, RT-MSIEVE 5A, fused silica PLOT, Length: 15 m, Internal Diameter: 0.32mm, DF: 30um, Temperature Limits: to 300 DegreeC

Column, RT-MSIEVE 5A, fused silica PLOT, Length: 15 m, Internal Diameter: 0.53mm, DF: 50um, Temperature Limits: to 300 DegreeC

Column, RT-MSIEVE 5A, fused silica PLOT, Length: 30 m, Internal Diameter: 0.32mm, DF: 30um, Temperature Limits: to 300 DegreeC

Column, RT-MSIEVE 5A, fused silica PLOT, Length: 15 m, Internal Diameter: 0.53mm, DF: 50um, Temperature Limits: to 300 DegreeC

Column, RT-QS-BOND, Length: 30 m, Internal Diameter: 0.32mm, DF: 10um, Separates ethane, ethylene, and acetylene to baseline.

Trap. Size: 2.5 m, 0.32mm ID with 2 Press-Tight Connectors, Protects detector and valves; connects between column and detector or valve, Eliminates detector spikes and scratches in valve rotors.

O-Ring, Material: Viton, Maximumiumum Temperature: 250 DegreeC, for PSS Injector.

Nut. Enhanced Capillary, eliminates the slot, increasing lifetime and durability, Meets or exceeds original manufacturer's performance.

Seal. Cross-Disk Inlet, ID: 0.8mm, Material: Gold-Plated, Ideal for high-flow split applications 500 mL/min on Agilent 5890 GCs.

Valve. Gas Sampling, Ideal for samples containing low concentrations of sulfur or other active compounds.

Valve. Sulfinert Treated, Gas Sampling, 1/16inch Fittings, 0.40mm Port Diameter; 'W Type' Valve, Ideal for samples containing low concentrations of sulfur or other active compounds.

Trap. High-Capacity Moisture, Maximumimum operating pressure: 250 psi (1, 724 kPa), Purged withuLtra-high-purity helium; ready to use.

Regulator. ULtra-High-Purity, Material: Stainless Steel, Type: Dual-Stage, Most stable outlet pressure control.

Liner. Straight Inlet, Liner ID: 1.0mm, Length: 86.2mm, OD: 4.0mm, Material: Borosilicate Glass, Deactivation: Intermediate Polarity (IP)

Liner. Inlet, Drilled Uniliner, 4.0mm ID, with Hole near Bottom, Length: 78.5mm, OD: 6.3mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Liner. Low Pressure Drop Inlet, 4.0mm ID, with wool, Length: 78.5mm, OD: 6.3mm, Material: Borosilicate Glass, for GCs equipped with split/splitless inlets

Adaptor, Makes setting flows easy, Meets or exceeds original manufacturer's performance.

Liner. Precision, Inlet, 4.0mm ID, with wool, Length: 92.1mm, OD: 6.2mm, Material: Borosilicate Glass

Nut. Finger-Tight Capillary Column, Allow wrench-free column installations, Work with standard (1/16inch) and compact (Agilent-style) ferrules, Made from high-quality stainless steel.

Nut. Finger-Tight Capillary Column, Allow wrench-free column installations, Work with standard (1/16inch) and compact (Agilent-style) ferrules, Made from high-quality stainless steel, pack2

Nut Driver. Ideal for changing FID jets, Securely grips jet for easy removal or installation, 1/4-Inch

Liner. Straight Inlet, 2.0mm ID, Length: 78.5mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Liner. Straight Inlet, 2.0mm ID, Length: 120mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, for TRACE GCs equipped with PTV inlets

Ferrule, for use with packed Column, Graphite construction 5mm.

Ferrule. Upper temperature limit 250 DegreeC, 100% PTFE; completely inert, One-piece design requires no back ferrule.

Ferrule, Upper temp. limit 250 C, 100% PTFE; completely inert, ID: 0.8mm, Fitting Size: 1/16in.

Ferrule, Upper temp. limit 250 C, 100% PTFE; completely inert, ID: 0.8mm, Fitting Size: 1/8in.

Ferrule, Upper temp. limit 250 C, 100% PTFE; completely inert, ID: 0.8mm, Fitting Size: 1/4in.

Nut and Washer, FID Collector, Replacement Parts for FID Collector Assembly Kit.

FID Ignitor Castle, Replacement Parts for FID Collector Assembly Kit.

Vial. Short-Cap, Screw-Thread, Volume: 2.0 mL, Color: Clear, Vial Size: 12 x 32mm, Cap Size: 9mm, with White Graduated Marking Spot

Cap/Septa. Preassembled, Fit all 2.0 mL, 12 x 32mm, screw-thread 8mm/425 vial-based autosamplers, Septa/Liner Material: Red PTFE/Silicone, 0.065inch

Vial. Modification: without Graduated Marking Spot, Volume: 2.0 mL, Color: Clear, Material: Glass, Vial Size: 12 x 32mm, Cap Size: 11mm

Vial. Modification: without Graduated Marking Spot, Volume: 2.0 mL, Color: Clear, Material: Glass, Vial Size: 12 x 32mm, Cap Size: 9mm

Vial. Modification: without Graduated Marking Spot, Volume: 2.0 mL, Color: Clear, Vial Size: 12 x 32mm, Cap Size: 9mm, Fit all 2.0 mL, 12 x 32mm, crimp-top vial- based autosamplers.

Liner. Straight Inlet, with wool, 2.0mm ID, Length: 71mm, OD: 3.0mm, Material: Borosilicate Glass, for GCs equipped with CIS4/PTV inlets

Vial. Modification: Rounded Bottom, Type: Crimp-Top, Volume: 20 mL, Color: Clear, Vial Size: 23 x 75mm, Cap Size: 20mm

Seal 2.0 mL, 11 mm Aluminum Crimp Seals With Septa Type:Crimp-Top Color:Silver Material:Aluminum Septa/Liner Material:PTFE/Natural Rubber

Vial. Headspace Crimp Vial Rounded Bottom Type:Crimp-Top Volume:10 mL Color:Clear Vial Size:23 x 46 mm Cap Size:20 mm

Cap Material:Polypropylene Modification:Open-Hole Type:Screw-Thread Color:Black Cap size:8 mm/425 for 2.0 mL, 8 mm Screw-Thread Vials

Crimp Vial Convenience kit. Crimp Vial Convenience Kit 2.0 mL Includes: Clear 2.0 mL Vial, Untreated, Silver Seal, PTFE/Natural Rubber Septa.clear-lid tray. Caps with septa packaged in a plastic bag

Crimp Vial Convenience kit. Crimp Vial Convenience Kit 2.0 mL Includes: amber 2.0 mL Vial, Untreated, Silver Seal, PTFE/Natural Rubber Septa.clear-lid tray. Caps with septa packaged in a plastic bag

Plunger Replacement Assembly, PTFE-Tipped Volume:10 uL for Fixed Needle Syringe.

Seal Inlet Liner Instrument for TRACE PTV Max Temp:450 C.

Seal Silver PTV for 6890 Gas chromatography.

O-Ring for Auto SYS XL or Clarus GCs with PSS Injector Material:Graphite Max Temp: 450 C.

Tubing. Rinsed and Cleaned 304 Stainless Steel Tubing Material:Instrument-Grade 304 Grade Stainless Steel ID:0.01in OD:1/16in

Jet Packed Column FID Replacement High-Performance Siltek Treated, 0.018-Inch ID Tip.

FID Collector Assembly includes insulator for 6890/6850/7890 GCs Constructed of high-quality stainless steel.

Liner. Baffled Inlet Liner 1.5 mm ID Geometry:Baffled Length:71 mm OD:3.0 mm Deactivation:Intermediate Polarity (IP) Material:Borosilicate Glass

Washer Replacement Inlet Seal.

Ring. Snap Ring Cap with Septum Type:Snap-Top Color:Clear Material:Polypropylene Septa/Liner Material:PTFE/Butyl Rubber 2.0 mL, 11 mm

Ring. Snap Ring Cap with Septum Type:Snap-Top Color:Clear Material:Polypropylene Septa/Liner Material:PTFE/Butyl Rubber 2.0 mL, 11 mm

Ring. Snap Ring Cap with Septum Type:Snap-Top Color:Clear Material:Polypropylene Septa/Liner Material:PTFE/Butyl Rubber 2.0 mL, 11 mm

Cap WISP 48 Type:Screw-Thread Modification:Open-Hole Color:Black Material:Polypropylene 4.0 mL WISP 48 Caps and Septa

Septa, 0.060in Size:13 mm x 0.060in Material:Red PTFE/Silicone.

Septa, 0.040in Size:13 mm x 0.040in Material:Red PTFE/Silicone/PTFE.

Seal. With Septa Type:Crimp-Top Color:Silver Material:Aluminum Septa/Liner Material:PTFE/Silicone 20 mm, preassembled

Seal. With Septa Type:Crimp-Top Color:Silver Material:Aluminum Septa/Liner Material:PTFE/Gray Butyl Rubber 20 mm, preassembled

Seal. With Septa Type:Crimp-Top Color:Silver Material:Aluminum Septa/Liner Material:PTFE/ Butyl 20 mm, preassembled

Seal. With Septa Type:Crimp-Top Color:Silver Material:Aluminum Septa/Liner Material:PTFE/Silicone 20 mm, preassembled

Septa. Material : Red PTFE/White Silicone Size:8 mm x 0.065in for 8mm Screw-Thread Vial

Liner. Double Taper Inlet Liner ID:4.0 mm Varian 392611929 Length:78.5 mm OD:6.5 mm Deactivation:Intermediate Polarity (IP) Material:Borosilicate Glass

Gauge. Capillary Installation for 5973/5975 MS Made from high-quality stainless steel.Seats ferrules onto column for consistent installations.

Liner. Single Taper Inlet 4.0 mm ID Varian 392611927 Length:78.5 mm OD:6.5 mm Deactivation:Intermediate Polarity (IP) Material:Borosilicate Glass

Nut and Ferrule Set Size:1/16in Material:Stainless Steel Parker fitting.

Trap. High-Capacity Moisture trap Fittings:1/8in Nickel-Plated Brass Purged with ultra-high-purity helium; ready to use. Maximum operating pressure: 250 psi (1,724 kPa). Maximum flow: 1.25 L/min.

Trap. Indicating Oxygen Fittings:1/8in Brass Heavy-walled glass body, protected by polycarbonate sleeve, prevents oxygen and water infusion. Prepurged for fast stabilization. 100 psi (689 kPa) maximum operating pressure. Reduces oxygen to 0.1 ppm. 10 um frits at inlet and outlet.

Trap. Indicating Oxygen Fittings:1/4in Brass Heavy-walled glass body, protected by polycarbonate sleeve, prevents oxygen and water infusion. Prepurged for fast stabilization. 100 psi (689 kPa) maximum operating pressure. Reduces oxygen to 0.1 ppm. 10 um frits at inlet and outlet.

Bag. Tedlar Sampling Bag Modification:Polypropylene Valve and Septum Fitting Volume:1 L Size:7in x 7in for Polypropylene or stainless steel valve. Both valves conveniently connect to 3/16in ID PTFE tubing.

Trap. Hydrocarbon S-Trap Fittings:1/8in Brass Reduces organics to 0.1 ppm (assuming 100 ppm input). Fits in GC oven for easy thermal recharging. Maximum operating pressure: 60 psi (414 kPa).

Cartridge. Super Clean Gas Trapping System for LC-MS includes 2-position base plate, 2 charcoal filters)

O-Ring. Replacement Chemical Traps and Parts Built-in frits retain fine particles; adsorbents remove both moisture and hydrocarbons.for Trap Fittings

Fitting FID/NPD Capillary Adaptor High-quality stainless steel construction.

Inlet and FID Maintenance kit Include the most common consumable GC supplies and tools.for 6850/6890/7890 Gas chromatography

Kit Make Life Easier (MLE) Capillary Tool.

Ferrule. Standard for Micropacked Column 1/16in Fittings Material:Vespel Fitting Size:1/16in

Ferrule. Standard for Micropacked Column 1/4in Fittings Material:Vespel Fitting Size:1/4in

Ferrule. Standard for Micropacked Column 1/8in Fittings Material:Vespel Fitting Size:1/8in

Ferrule GRAPHPACK 2M for Gerstel CIS 3 and CIS 4 PTV Inlets Fits Column ID:0.32 mm.

Ferrule GRAPHPACK 2M for Gerstel CIS 3 and CIS 4 PTV Inlets Fits Column ID:0.25 mm.

O-Ring. Material:Viton Max Temp:300 C Fit split (6.3 mm OD) or splitless (6.5 mm OD) liners.

Liner. Straight Inlet Liner 3.5 mm ID Liner ID:3.5 mm Length:95 mm OD:5.0 mm Deactivation:Intermediate Polarity (IP) Material:Borosilicate Glass for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Liner. Straight Inlet Liner 4.0 mm ID with Wool Length:78.5 mm OD:6.5 mm Deactivation:Intermediate Polarity (IP) Packing:Deact. Wool Material:Borosilicate Glass equipped with split/splitless inlets

Liner. Single Taper Inlet 4.0 mm ID Recessed with Wool Length:78.5 mm OD:6.5 mm Deactivation:Intermediate Polarity (IP) Packing:Deactivated Wool Material:Borosilicate Glass equipped with split/splitless inlets

Tee Zero Dead Volume Valco Size:1/16in Material:Siltek/Sulfinert Treated.

Microseal Replacement for SPME Applications (3 to 100 psi) Merlin 21-01W.

Nut Capillary for Shimadzu 17A, 2010, and 2014 Gas chromatography.

Merlin Microseal.

Trap Replacement Chemical Part Split Vent for 6890/6850 Gas chromatography.

Loop. Gas Sample Sulfinert Treated Volume:10 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:20 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:50 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:100 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:500 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:250 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:1mL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:2mL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:5mL for 1/16in fittings, for W Type valves

Liner. Zero Dilution Inner 1.0 mm ID Length:73 mm OD:2.0 mm Deactivation:Intermediate Polarity (IP) Material:Borosilicate Glass

Tubing. Bender Bends 1/8-inch, 3/16-inch, or 1/4-inch tubing Assists in making accurate left-hand, right-hand, or offset bends

Cutter Ridgid Tubing for 1/8in or 1/4in metal tubing Replaceable cutting wheel.

Trap Replacement Chemical Part Split Vent for 6890/6850 Gas chromatography.

Plier Set Includes 6-inch nose/side cutter, 6-inch wire cutter, and 6-inch adjusting plier.

Screwdriver Set Torx Set includes TR-10, TR-15, and TR-20.

Ferrule Front 103-1 Swagelok Fitting Size:1/8in Material:Brass.

Ferrule Front 403-1 Swagelok Fitting Size:1/16in Material:Brass.

Nut and Ferrule Set Swagelok Size:1/8in Material:Brass.

Nut and Ferrule Set Swagelok Size:1/4in Material:Brass.

Union 100-6 Swagelok Fitting Size:1/8in Material:Brass.

Reducing Union 200-6-1 Swagelok Fitting Size:1/8in to 1/16in Material:Brass.

Tee 100-3 Swagelok fitting Size:1/16in Material:Brass.

Tee 100-3 Swagelok fitting Size:1/8in Material:Brass.

Cross 200-4 Swagelok fitting Size:1/8in Material:Brass.

Kit Swagelok Fitting Material:Brass includes assortment of 1/8in and 1/4in brass fitting.

Ball Valve Swagelok Shut-Off Gas Size:1/8in Material:Brass.

Reducing Union 200-6-1 Swagelok Fitting Size:1/8in to 1/16in Material:Stainless steel.

Tee 100-3 Swagelok fitting Size:1/16in Material:Stainless steel.

Column Rxi Guard/Retention Gap Nominal ID:0.32 mm Nominal OD:0.45 +/- 0.04 mm Length:5 m.

Column Rxi Guard/Retention Gap Nominal ID:0.53 mm Nominal OD:0.45 +/- 0.04 mm Length:5 m.

Column Rxi Guard/Retention Gap Nominal ID:0.53 mm Nominal OD:0.45 +/- 0.04 mm Length:5 m.

Column Rtx-1 fused silica Temp. Limits:-60 to 320/340 C Length:30 m Internal Diameter:0.53 mm df (um):0.10 um

Column. Cloumn Rtx-DHA fused silica Temp. Limits:-60 to 300/340 C Length:100 m Internal Diameter:0.20 mm df (um):0.50 um

Column. Cloumn Rtx-DHA fused silica Temp. Limits:-60 to 300/340 C Length:150 m Internal Diameter:0.20 mm df (um):0.50 um

Column Rtx-1 fused silica Temp. Limits:-60 to 270/290 C Length:15 m Internal Diameter:0.53 mm df (um):5.00 um

Column Rtx-5MS-Low-Bleed fused silica GC-MS Temp. Limits:-60 to 330/350 C Length:30 m Internal Diameter:0.25 mm df (um):0.10 um

Column Rtx-5MS-Low-Bleed GC-MS Temp. Limits:-60 to 330/350 C Length:60 m Internal Diameter:0.25 mm df (um):0.25 um

Trap PLOT Column Particle 2.5 m, 0.53 mm ID with 2 Press-Tight Connectors Includes two Press-Tight connectors and a 2.5 m column.

Column Rt-Alumina BOND/Na2SO4 fused silica PLOT Temp. Limits:to 200 C Length:50 m Internal Diameter:0.53 mm df (um):10 um

Column Rt-Alumina BOND/Na2SO4 fused silica PLOT Temp. Limits:to 200 C Length:30 m Internal Diameter:0.32 mm df (um):5um

Column Rt-Alumina BOND/Na2SO4 fused silica PLOT Temp. Limits:to 200 C Length:50 m Internal Diameter:0.32 mm df (um):5um

Column Rt-Alumina BOND/KCl fused silica PLOT Temp. Limits:to 200 C Length:50 m Internal Diameter:0.53 mm df (um):10 um

Column Rt-Alumina BOND/MAPD fused silica PLOT Temp. Limits:to 250 C Length:50 m Internal Diameter:0.53 mm df (um):10 um

Ferrule. Adaptor 1/32-Inch ZF.5V-5 Material:Valcon Polyimide Tubing ID:0.53 mm Tubing OD:0.50-0.80 mm

Column Rt-Alumina BOND/MAPD fused silica PLOT Temp. Limits:to 250 C Length:50 m Internal Diameter:0.32 mm df (um):5 um

Union. Zero Dead Volume Valco Internal Union Bore:0.25 mm 300-series stainless steel. For 1/16in OD tubing. ferrules included.

Union. Zero Dead Volume Valco Internal Union Bore :1/6in 300-series stainless steel. For 1/16in OD tubing. ferrules included.

Needle Replacement 7786-01 Hamilton Volume:5-10 uL Gauge:26s Length:1.71in including tips on handling and cleaning

Crimper Easy Grip Manual Decapper Size:11 mm.

Decapper Easy Grip Manual Crimper Size:11 mm.

Gasket Replacement Parts for Resprep SPE Manifold Size:12-port.

Filter. In-Line Filter 7 um Stainless Steel & Siltek Treated 1/4in compression fitting on both end

Seal. Aluminum Crimp Seal 2.0 mL, 11 mm Type:Crimp-Top Color:blue With Septa

Seal. Aluminum Crimp Seal 2.0 mL, 11 mm Type:Crimp-Top Color:green With Septa

Seal. Aluminum Crimp Seal 2.0 mL, 11 mm Type:Crimp-Top Color:red With Septa

Seal. Aluminum Crimp Seal 2.0 mL, 11 mm Type:Crimp-Top Color:yellow With Septa

Seal. Aluminum Crimp Seal 2.0 mL, 11 mm Type:Crimp-Top Color:Silver With Septa

Vial 2.0 mL Crimp-Top 2 x 32 mm, 11 mm Modification:with White Graduated Marking Spot Color:Clear Material:Glass

Seal. Aluminum Crimp Seal 2.0 mL, 11 mm Type:Crimp-Top Color:Silver With Septa

Cap. Snap-On or Crimp cap 2.0 mL, 11 mm Poly Crimp Seal Type:Crimp-Top Color:Clear Septa/Liner Material:PTFE/Silicone

Cap. Crimp Seal Cap 2.0 mL, 11 mm Poly Snap-On ype:Crimp-Top Color:blue Septa/Liner Material:PTFE/Silicone/PTFE

Cap. Crimp Seal Cap 2.0 mL, 11 mm Poly Snap-On ype:Crimp-Top Color:Clear Septa/Liner Material:PTFE/Silicone/PTFE

Cap. Screw-Vial Closure preassembled 2.0 mL, 9 mm Short-Cap Type:Screw-Thread Color:blue Septa/Liner Material:PTFE/Butyl Rubber

Cap. Screw-Vial Closure preassembled 2.0 mL, 9 mm Short-Cap Type:Screw-Thread Color:green Septa/Liner Material:PTFE/Silicone

Cap. Screw-Vial Closure 2.0 mL, 9 mm Short-Cap Type:Screw-Thread Color:blue Septa/Liner Material:PTFE/Silicone/PTFE

Cap. Screw-Vial Closure 2.0 mL, 9 mm Short-Cap Type:Screw-Thread Color:red Septa/Liner Material:PTFE/Silicone/PTFE

Cap. Screw-Vial Closure 2.0 mL, 9 mm Short-Cap Type:Screw-Thread Color:Yellow Septa/Liner Material:PTFE/Silicone/PTFE

Insert big mouth Volume:50 uL for 2.0 mL, 11 mm Crimp-Top & 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials

Insert big mouth Volume:250 uL for 2.0 mL, 11 mm Crimp-Top & 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials

Insert big mouth Volume:350 uL for 2.0 mL, 11 mm Crimp-Top & 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials

Insert big mouth with Bottom Spring Volume:250 uL for 2.0 mL, 11 mm Crimp-Top & 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials

Vial. Screw-Thread Vial Modification:with White Graduated Marking Spot Volume:2.0 mL Color:Clear Vial Size:12 x 32 mm Cap Size:8 mm/425

Vial. Screw-Thread Vial Modification:with White Graduated Marking Spot Volume:2.0 mL Color:amber Vial Size:12 x 32 mm Cap Size:8 mm/425

Vial. Crimp-Top Vial Modification:with 100 uL Polypropylene Insert Type:Crimp-Top Volume:2.0 mL Color:Clear Material:Plastic

Vial. Crimp-Top Vial Modification:with 100 uL glass Insert Type:Crimp-Top Volume:2.0 mL Color:Clear Material:Plastic

Vial. Screw-Thread Step Vial 4.0 mL WISP 48 Modification:with White Graduated Marking Spot Color:Amber Vial Size:15 x 45 mm Cap Size:13 mm/425

Crimp Vial Convenience kit. Crimp Vial Convenience Kit Includes:Clear 2.0 mL Vial, Deactivated, Silver Seal, PTFE/Natural Rubber Septa

Crimp Vial Convenience kit. Crimp Vial Convenience Kit Includes:Clear 2.0 mL Vial, Deactivated, Silver Seal, PTFE/Natural Rubber Septa

Vial. Headspace Crimp Vial Modification:Flat Bottom Type:Crimp-Top Volume:10 mL Color:Clear Vial Size:23 x 46 mm Cap Size:20 mm

Syringe. Manual Microliter Syringe SGE 250R Volume:250 uL Termination:F Gauge:25 Length:50 mm Point Style:2

Needle. Replacement Needle 037745 SGE Volume:10 uL Termination:R Gauge:26 Length:42 mm Point Style:Cone for Shimadzu Autosampler Syringe

Syringe. Micro-Volume, Positive Displacement Syringe SGE 0.5BR-7BV Volume:0.5 uL Termination:R Gauge:23 Length:70 mm Point Style:2 High precision and accuracy down to 0.1 uL.

Syringe. Standard Microliter Syringe SGE 5F-HP-0.47 Volume:5 uL Termination:F Gauge:26 Length:42 mm Point Style:Cone

Syringe. Standard Microliter Syringe SGE 50R-HP-0.63 Volume:50 uL Termination:R Gauge:23 Length:42 mm Point Style:Cone

Plunger-in-Needle Replacement Kit SGE NP0.5B-7BV Volume: 0.5 uL Gauge: 23 Length: 70 mm Point Style: 2

Kit Replacement Plunger-in-Needle SGE NP1B-7BV Volume:1.0 uL Gauge:23 Length:70 mm Point Style:2.

Kit Replacement Plunger-in-Needle SGE NP5B-7BV Volume:5.0 uL Gauge:23 Length:70 mm Point Style:2.

Syringe. Autosampler Syringe SGE 10R-S-0.63 Volume:10 uL Termination:R Gauge:23 Length:42 mm Point Style:Cone

Ferrule. Two-Hole Ferrule Replacement Ferrule ID:0.4 mm Fits Column ID:0.25/0.28 mm Material:Vespel/ Graphite Fitting Size:1/16in for Dual-Column Confirmational Analysis

Ferrule. Two-Hole Ferrule Replacement Ferrule ID:0.5 mm Fits Column ID:0.25/0.28 mm Material:Vespel/ Graphite Fitting Size:1/16in for Dual-Column Confirmational Analysis

Nut for Terminal Fitting TRACE Gas chromatography.

Syringe. Autosampler Syringe SGE 10F-BT-8/0.47C Volume:10 uL Termination:F Gauge:26 Length:80 mm Point Style:Cone

O-Ring Instrument:for Shimadzu 17A, 2010, and 2014 GCs Material:Viton Max Temp:250 C.

Syringe. Autosampler Syringe SGE 10R-BT-8/0-0.47C Volume:10 uL Termination:R Gauge:26 Length:80 mm Point Style:Cone

Syringe. Autosampler Syringe Hamilton 701SN Volume:10 uL Termination:N Gauge:25s Length:2in Point Style:2

Filter. UltraShield UHPLC PreColumn Filter Leak-tight to 15,000 psi (1,034 bar). 0.5 um stainless steel filter in stainless steel body with PEEK ferrule.

Filter. High-Pressure Frit-Type In-Line Filter Porosity:2.0 um with replaceable, PEEK encapsulated 316 stainless steel frit with a surface area of 12 mm2

Cutter Clean-Cut Tubing for PEEK, PTFE, Tefzel, and other polymer Burr-free.

Frit 1/4-Inch HPLC ID:4.6 mm Porosity:2.0 um made from chromatographic-grade 316 stainless steel.

Frit 1/4-Inch HPLC ID:3.2 mm Porosity:2.0 um made from chromatographic-grade 316 stainless steel.

Frit 1/4-Inch HPLC ID:2.1 mm Porosity:2.0 um made from chromatographic-grade 316 stainless steel.

Frit 1/4-Inch HPLC ID:2.1 mm Porosity:0.5 um made from chromatographic-grade 316 stainless steel.

Column Empty Chromatography HPLC ID:4.6 mm Length:100 mm OD:1/4in 316 stainless steel tubing complete with end-fittings, frits, nuts, and ferrules.

Column Empty Chromatography HPLC ID:4.6 mm Length:150 mm OD:1/4in 316 stainless steel tubing complete with end-fittings, frits, nuts, and ferrules.

Lamp DAD G1315A, G1365A Model number:1100, 1200 for HPLC System.

Lamp, VWD G1314A Model number:1100, 1200 for HPLC System.

Lamp 8453 Deuterium for HPLC System.

Pump PM Includes: PTFE frits (2), outlet cap, gold disk seal, active inlet cartridge, piston seals (4), glass solvent filters (2) Model number: 1050, 1100, 1200 for HPLC system

Autosampler Preventive Maintenance Includes: rotor seal, piston seals (2), needle assembly, needle seat, finger caps (3) Model number: 1100, 1200

Sapphire Piston Plunger Assembly Model 1050, 1100, 1200 for HPLC Systems

Rotor Seal Model 1100 for HPLC Systems

Wash Seal Model 1050/1100/1200 for HPLC Systems

Needle Assembly Model 1100 for HPLC Systems

Tubing Clip Securely holds 1/16-inch or 1/8-inch tubing in beaker, flask, or bottle up to 4 mm thick.

Rotor Seal Rheodyne-Style, 3-Groove for HPLC System

Lamp DAD Long-Life Deuterium (2,000 hours), Model : 1100 for HPLC System

Female Luer End Cap Resprep SPE Tube Parts & Accessories, for 20 mL packed tubes. Material: polypropylene Volume: universal for HPLC System

Tube Cap for 20 mL packed tubes, Material: polypropylene Volume: 1 ml Resprep SPE Tube Parts & Accessories pack of 12

Tube Cap for 20 mL packed tubes, Material: polypropylene Volume: 3 ml Resprep SPE Tube Parts & Accessories pack of 12

Tube Cap for 20 mL packed tubes, Material: polypropylene Volume: 6 ml Resprep SPE Tube Parts & Accessories pack of 12

Tube Cap for 20 mL packed tubes, Material: polypropylene Volume: 15 ml Resprep SPE Tube Parts & Accessories pack of 12

Tube Cap for 20 mL packed tubes, Material: polypropylene Volume: 25 ml Resprep SPE Tube Parts & Accessories pack of 12

Connector for 20 mL packed tubes. Material: polypropylene Volume: 1, 3, 6 mL Resprep SPE Tube Parts & Accessories Pack of 50

Connector for 20 mL packed tubes. Material: polypropylene Volume: 15, 25 mL Resprep SPE Tube Parts & Accessories Pack of 50

Connector for 20 mL packed tubes. Material: polypropylene Volume: 60 mL Resprep SPE Tube Parts & Accessories Pack of 50

Empty Tube for 20 mL packed tubes. Material: polypropylene Volume: 1 mL Resprep SPE Tube Parts & Accessories Pack of 50

Empty Tube for 20 mL packed tubes. Material: polypropylene Volume: 3 mL Resprep SPE Tube Parts & Accessories Pack of 50

Empty Tube for 20 mL packed tubes. Material: polypropylene Volume: sample reservoir, 25 mL Resprep SPE Tube Parts & Accessories Pack of 12

Empty Tube for 20 mL packed tubes. Material: polypropylene Volume: sample reservoir, 60 mL Resprep SPE Tube Parts & Accessories Pack of 12

Resprep Oil & Grease SPE Disks 47 mm glass fiber disks embedded with specialty bonded silica. Meet requirements for EPA Method 1664. Reduce emulsion formation and amount of solvent required by previous EPA methods.No chlorofluorocarbons needed.

Resprep Bonded Reversed Phase SPE Cartridge Volume: 1 mL, 100 mg Packing: C18 (high load, endcapped) Hydrophobic (nonpolar) silica-based adsorbents; used to extract hydrophobic analytes from polar matrices, such as water (e.g., pesticides from water).

Resprep Bonded Reversed Phase SPE Cartridge Hydrophobic (nonpolar) silica-based adsorbents; used to extract hydrophobic analytes from polar matrices, such as water (e.g., pesticides from water). C18 (high load, endcapped), 1 mL, 100 mg

Manifold Lid Size: 12-Port, sample guides not included Replacement Parts for Resprep SPE Manifolds

Collection Rack Size: 12-Port Replacement Parts for Resprep SPE Manifolds

Manifold Lid Size: 24-Port, sample guides not included Replacement Parts for Resprep SPE Manifolds

Collection Rack Size: 24-Port Replacement Parts for Resprep SPE Manifolds

Resprep SPE Cartridge Volume: 3 mL, 250 mg Packing: CarboPrep 90 CarboPrep cartridges are manufactured from chromatographic-grade, nonporous, graphitized carbon

Q-sep QuEChERS dSPE Tubes for Extract Cleanup Q-sep Q211 2mL Micro-Centrifuge Tube, 150mg MgSO4, 25mg PSA, 25mg C18, 100pk Packaged in Mylar Bags

Q-sep QuEChERS dSPE Tubes for Extract Cleanup Q-sep Q210 Micro-Centrifuge Tube 2mL 150mg, MgSO4,25mg PSA, 100-pk Packaged in Mylar Bags

Q-sep QuEChERS dSPE Tubes for Extract Cleanup Q-sep Q212 Micro-Centrifuge Tube, 2mL 150mg MgSO4, 25mg PSA, 2.5mg Carbon, 100-pk

Q-sep QuEChERS dSPE Tubes for Extract Cleanup Q-sep Q213 Micro-Centrifuge Tube, 2mL, 150mg MgSO4, 25mg PSA, 7.5mg Carbon, 100-pk Packaged in Mylar Bags

Rtx-5 Fused Silica Capillary Column Temp. Limits: -60 to 320/340 C 20m Length, 0.10mm internal DiameterID, 0.40um df

Rtx-Wax Capillary Column (fused silica). Rtx-Wax Capillary Column (fused silica) (polar phase; Crossbond polyethylene glycol) Temp. Limits: 20 to 250 C 20m Length, 0.10mm internal DiameterID, 0.10um df

Rtx-Wax Capillary Column (fused silica). Rtx-Wax Capillary Column (fused silica) (polar phase; Crossbond polyethylene glycol) Temp. Limits: 20 to 240/250 C 10m Length, 0.10mm internal DiameterID, 0.20um df

Rtx-1701 Capillary Column (fused silica). Rtx-1701 Capillary Column (fused silica) (midpolarity Crossbond phase) Temp. Limits: -20 to 280 C 20m Length, 0.1mm internal DiameterLength, 0.1um df

Rxi-17Sil MS Capillary Column (fused silica). Rxi-17Sil MS Capillary Column (fused silica) (midpolarity Crossbond phase) Temp. Limits: 40 to 340/360 C 10m Length, 0.15mm internal DiameterID, 0.15um df

MXT-1 Capillary Column (Siltek-treated stainless steel). MXT-1 Capillary Column (Siltek-treated stainless steel) (nonpolar phase; Crossbond dimethyl polysiloxane) Temp. Limits: -60 to 320/360 C 15m Length, 0.53mm internal DiameterID, 1.00um df

MXT-5 Capillary Column (Siltek-treated stainless steel). MXT-5 Capillary Column (Siltek-treated stainless steel) (low polarity phase; Crossbond diphenyl dimethyl polysiloxane) Temp. Limits: -60 to 330/430 C 15m Length, 0.25mm internal DiameterID, 0.10um df

Ultra Silica Column 3um 100 A 100 mm 2.1 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

MXT-5 Capillary Column (Siltek-treated stainless steel). MXT-5 Capillary Column (Siltek-treated stainless steel) (low polarity phase; Crossbond diphenyl dimethyl polysiloxane) Temp. Limits: -60 to 430 C 30m Length, 0.25mm internal DiameterID, 0.10um df

Ultra Silica Column 3um 100 A 100 mm 4.6 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

Ultra Silica Column 3um 100 A 50 mm 2.1 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

Ultra Silica Column 5um 100 A 100 mm 2.1 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

Ultra Silica Column 5um 100 A 100 mm 30 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

Ultra Silica Column 5um 100 A 50 mm 30 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

Ultra Silica Column 5um 100 A 150 mm 2.1 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

Ultra Silica Column 5um 100 A 150 mm 4.6 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

Ultra Silica Column 5um 100 A 250 mm 4.6 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

Ultra C1 Column (USP L13). Ultra C1 Column (USP L13) pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 150x4.6mm ID

Ultra Silica HPLC Prep Column 5um 100 A 250 mm 10 mm pH range: 2.5 to 8, temperature limit: 80 C phase category: bare silica

Ultra C1 Column (USP L13). Ultra C1 Column (USP L13) pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 250x4.6mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 3um, 100x2.1mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 3um, 100x4.6mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 3um, 30x2.1mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 3um, 30x4.6mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 3um, 50x2.1mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 3um, 50x4.6mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 3um, 150x2.1mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 3um, 150x4.6mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 100x4.6mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 50x2.1mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 50x4.6mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 150x2.1mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) Excellent for a wide range of analyses, end-cap: yes pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 150x4.6mm ID

Ultra C8 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 150x10mm ID

Ultra C8 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 150x21.2mm ID

Ultra C8 Column (USP L7). Ultra C8 Column (USP L7) pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 250x4.6

Ultra C8 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, pore size: 100 A Particle Size 5um, 250x10mm ID

Ultra Cyano Column (USP L10). Ultra Cyano Column (USP L10) HPLC & UHPLC Analytical pH range: 2.5 to 8, temperature limit: 80 C, phase category: cyano, end-cap: yes, carbon load: 8% Particle Size 3um, 100x2.1mm (lengthxID)

Ultra Cyano Column (USP L10). Ultra Cyano Column (USP L10) HPLC & UHPLC Analytical pH range: 2.5 to 8, temperature limit: 80 C, phase category: cyano, end-cap: yes, carbon load: 8% Particle Size 3um, 100x4.6mm (lengthxID)

Ultra Cyano Column (USP L10). Ultra Cyano Column (USP L10) HPLC & UHPLC Analytical pH range: 2.5 to 8, temperature limit: 80 C, phase category: cyano, end-cap: yes, carbon load: 8% Particle Size 3um, 50x4.6mm (lengthxID)

Ultra Cyano Column (USP L10). Ultra Cyano Column (USP L10) HPLC & UHPLC Analytical pH range: 2.5 to 8, temperature limit: 80 C, phase category: cyano, end-cap: yes, carbon load: 8% Particle Size 3um, 150x4.6mm (lengthxID)

Ultra Cyano Column (USP L10). Ultra Cyano Column (USP L10) HPLC & UHPLC Analytical pH range: 2.5 to 8, temperature limit: 80 C, phase category: cyano, end-cap: yes, carbon load: 8% Particle Size 5um, 50x2.1mm (lengthxID)

Ultra Cyano Column (USP L10). Ultra Cyano Column (USP L10) HPLC & UHPLC Analytical pH range: 2.5 to 8, temperature limit: 80 C, phase category: cyano, end-cap: yes, carbon load: 8% Particle Size 5um, 50x4.6mm (lengthxID)

Ultra Cyano Column (USP L10). Ultra Cyano Column (USP L10) HPLC & UHPLC Analytical pH range: 2.5 to 8, temperature limit: 80 C, phase category: cyano, end-cap: yes, carbon load: 8% Particle Size 5um, 150x2.1mm (lengthxID)

Ultra Cyano Column (USP L10). Ultra Cyano Column (USP L10) HPLC & UHPLC Analytical pH range: 2.5 to 8, temperature limit: 80 C, phase category: cyano, end-cap: yes, carbon load: 8% Particle Size 5um, 250x4.6mm (lengthxID)

Ultra Cyano HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: cyano, end-cap: yes, carbon load: 8% Particle Size 5um, 250x10mm (lengthxID)

Ultra Amino Column (USP L8). Ultra Amino Column (USP L8) pH range: 2.5 to 8, temperature limit: 80 C, phase category: amino, carbon load: 2% Particle Size 3um, 100x4.6mm (lengthxID)

Ultra Amino Column (USP L8). Ultra Amino Column (USP L8) pH range: 2.5 to 8, temperature limit: 80 C, phase category: amino, carbon load: 2% Particle Size 3um, 50x4.6mm (lengthxID)

Ultra Amino Column (USP L8). Ultra Amino Column (USP L8) pH range: 2.5 to 8, temperature limit: 80 C, phase category: amino, carbon load: 2% Particle Size 5um, 100x4.6mm (lengthxID)

Ultra Amino Column (USP L8). Ultra Amino Column (USP L8) pH range: 2.5 to 8, temperature limit: 80 C, phase category: amino, carbon load: 2% Particle Size 3um, 150x4.6mm (lengthxID)

Ultra Amino Column (USP L8). Ultra Amino Column (USP L8) pH range: 2.5 to 8, temperature limit: 80 C, phase category: amino, carbon load: 2% Particle Size 5um, 150x4.6mm (lengthxID)

Ultra Amino Column (USP L8). Ultra Amino Column (USP L8) pH range: 2.5 to 8, temperature limit: 80 C, phase category: amino, carbon load: 2% Particle Size 5um, 50x4.6mm (lengthxID)

Ultra Amino Column (USP L8). Ultra Amino Column (USP L8) pH range: 2.5 to 8, temperature limit: 80 C, phase category: amino, carbon load: 2% Particle Size 5um, 250x4.6mm (lengthxID)

Ultra Biphenyl Column (USP L11). Ultra Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, phase category: phenyl, carbon load: 15% Particle Size 3um, 50x2.1mm (lengthxID)

Ultra C18 Column (USP L1). Ultra C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 3um, 150x4.6mm (lengthxID)

Ultra C18 Column (USP L1). Ultra C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 3um, 150x2.1mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 100x10mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 100x21.2mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 100x30mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 50x10mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 50x21.2mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 50x30mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 150x21.2mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 150x10mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 150x30mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 250x10mm (lengthxID)

Ultra C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: C18, octadecylsilane, carbon load: 20% Particle Size 5um, 250x21.2mm (lengthxID)

Ultra Aqueous C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: modified C18, carbon load: 15% Particle Size 5um, 100x10mm (lengthxID)

Ultra Aqueous C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: modified C18, carbon load: 15% Particle Size 5um, 150x10mm (lengthxID)

Ultra Aqueous C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: modified C18, carbon load: 15% Particle Size 5um, 100x21.2mm (lengthxID)

Ultra Aqueous C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: modified C18, carbon load: 15% Particle Size 5um, 150x21.2mm (lengthxID)

Ultra Aqueous C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: modified C18, carbon load: 15% Particle Size 5um, 250x10mm (lengthxID)

Ultra Aqueous C18 HPLC Prep Column pH range: 2.5 to 8, temperature limit: 80 C, phase category: modified C18, carbon load: 15% Particle Size 5um, 250x21.2mm (lengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 3um, 100x2.1mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 3um, 100x4.6mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 3um, 30x4.6mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 3um, 30x2.1mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 3um, 50x2.1mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 3um, 150x2.1mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 3um, 50x4.6mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 3um, 150x4.6mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 5um, 100x2.1mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 5um, 100x4.6mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 5um, 30x2.1mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 5um, 30x4.6mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 5um, 50x2.1mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 5um, 50x4.6mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 5um, 150x12.1mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 5um, 150x4.6mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 5um, 250x2.1mm (LengthxID)

Pinnacle DB Biphenyl Column (USP L11). Pinnacle DB Biphenyl Column (USP L11) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 8%, phase category: phenyl Particle Size 5um, 250x4.6mm (LengthxID)

Pinnacle DB Silica Column (USP L3). Pinnacle DB Silica Column (USP L3) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: no, pore size: 140 A, phase category: bare silica Particle Size 5um, 250x4.6mm (LengthxID)

Pinnacle DB C8 Column (USP L7). Pinnacle DB C8 Column (USP L7) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 6%, phase category: C8, octylsilane Particle Size 5um, 100x4.6mm (LengthxID)

Pinnacle DB C8 Column (USP L7). Pinnacle DB C8 Column (USP L7) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 6%, phase category: C8, octylsilane Particle Size 5um, 30x4.6mm (LengthxID)

Pinnacle DB C8 Column (USP L7). Pinnacle DB C8 Column (USP L7) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 6%, phase category: C8, octylsilane Particle Size 5um, 50x2.1mm (LengthxID)

Pinnacle DB C8 Column (USP L7). Pinnacle DB C8 Column (USP L7) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 6%, phase category: C8, octylsilane Particle Size 5um, 50x4.6mm (LengthxID)

Pinnacle DB C8 Column (USP L7). Pinnacle DB C8 Column (USP L7) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 6%, phase category: C8, octylsilane Particle Size 5um, 150x2.1mm (LengthxID)

Pinnacle DB C8 Column (USP L7). Pinnacle DB C8 Column (USP L7) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 6%, phase category: C8, octylsilane Particle Size 5um, 150x4.6mm (LengthxID)

Pinnacle DB C8 Column (USP L7). Pinnacle DB C8 Column (USP L7) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 6%, phase category: C8, octylsilane Particle Size 5um, 250x2.6mm (LengthxID)

Pinnacle DB C18 Column (USP L1). Pinnacle DB C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 11%, phase category: C18, octadecylsilane Particle Size 3um, 100x4.6mm (LengthxID)

Pinnacle DB C18 Column (USP L1). Pinnacle DB C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 11%, phase category: C18, octadecylsilane Particle Size 5um, 100x2.1mm (LengthxID)

Pinnacle DB C18 Column (USP L1). Pinnacle DB C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 11%, phase category: C18, octadecylsilane Particle Size 5um, 100x4.6mm (LengthxID)

Pinnacle DB C18 Column (USP L1). Pinnacle DB C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 11%, phase category: C18, octadecylsilane Particle Size 5um, 50x4.6mm (LengthxID)

Pinnacle DB C18 Column (USP L1). Pinnacle DB C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 11%, phase category: C18, octadecylsilane Particle Size 5um, 50x2.1mm (LengthxID)

Pinnacle DB C18 Column (USP L1). Pinnacle DB C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 11%, phase category: C18, octadecylsilane Particle Size 5um, 150x2.1mm (LengthxID)

Pinnacle DB C18 Column (USP L1). Pinnacle DB C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 11%, phase category: C18, octadecylsilane Particle Size 5um, 150x4.6mm (LengthxID)

Pinnacle DB C18 Column (USP L1). Pinnacle DB C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 11%, phase category: C18, octadecylsilane Particle Size 5um, 250x4.6mm (LengthxID)

Pinnacle DB C18 Column (USP L1). Pinnacle DB C18 Column (USP L1) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 11%, phase category: C18, octadecylsilane Particle Size 5um, 250x2.1mm (LengthxID)

Pinnacle DB Cyano Column (USP L10). Pinnacle DB Cyano Column (USP L10) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 4%, phase category: cyano Particle Size 5um, 50x2.1mm (LengthxID)

Pinnacle DB Cyano Column (USP L10). Pinnacle DB Cyano Column (USP L10) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 4%, phase category: cyano Particle Size 5um, 150x2.1mm (LengthxID)

Pinnacle DB Cyano Column (USP L10). Pinnacle DB Cyano Column (USP L10) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 4%, phase category: cyano Particle Size 5um, 150x4.6mm (LengthxID)

Pinnacle DB Cyano Column (USP L10). Pinnacle DB Cyano Column (USP L10) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 4%, phase category: cyano Particle Size 5um, 205x4.6mm (LengthxID)

Pinnacle DB PFP Propyl Column (USP L43). Pinnacle DB PFP Propyl Column (USP L43) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 6%, phase category: fluorophenyl propyl Particle Size 3um, 100x4.6mm (LengthxID)

Pinnacle DB PFP Propyl Column (USP L43). Pinnacle DB PFP Propyl Column (USP L43) pH range: 2.5 to 8, temperature limit: 80 C, end-cap: yes, pore size: 140 A, carbon load: 6%, phase category: fluorophenyl propyl Particle Size 3um, 100x2.1mm (LengthxID)

Rtx-624 Column (fused silica). Rtx-624 Column (fused silica) Temperature range: -20 C to 240 C. (low to midpolarity phase; Crossbond cyanopropylphenyl dimethyl polysiloxane) Length 30m, 0.53mm ID, Particle size 3.00um with 5m Integra-Guard Column

RTX-5 Capillary Column 50m, 0.53mm ID, 1.00um.

Innovative Integra-Guard Column RTX-1701 30 m 0.25 mm 0.25um with 5 m Integra-Guard Column Length 30m, 0.25mm ID, Particle size 0.25um with 5m Integra-Guard Column

Universal Y Press-Tight Connectors Deactivated Split sample flow onto two Column-perform confirmation analysis with a single injection. Split a single column flow to two detectors.

Raptor Biphenyl EXP Guard Column Cartridge Auto-adjusting design provides ZDV (zero dead volume) connection to any 10-32 female port. Particle size 2.7um, GUARD, 5 X 2.1mm (LengthxID)

Raptor Biphenyl EXP Guard Column Cartridge Auto-adjusting design provides ZDV (zero dead volume) connection to any 10-32 female port. Particle size 2.7um, GUARD, 5 X 3.0mm (LengthxID)

Raptor Biphenyl LC Column (USP L11). Raptor Biphenyl LC Column (USP L11) Ideal for bioanalytical testing applications like drug and metabolite analyses.Limits ionization suppression and allows simple, MS-friendly mobile phases. Particle size 2.7um, 100 X 2.1mm (LengthxID)

Raptor Biphenyl LC Column (USP L11). Raptor Biphenyl LC Column (USP L11) Ideal for bioanalytical testing applications like drug and metabolite analyses.Limits ionization suppression and allows simple, MS-friendly mobile phases. Particle size 2.7um, 100 X 3.0mm (LengthxID)

Raptor Biphenyl LC Column (USP L11). Raptor Biphenyl LC Column (USP L11) Ideal for bioanalytical testing applications like drug and metabolite analyses.Limits ionization suppression and allows simple, MS-friendly mobile phases. Particle size 2.7um, 100 X 4.6mm (LengthxID)

Raptor Biphenyl LC Column (USP L11). Raptor Biphenyl LC Column (USP L11) Ideal for bioanalytical testing applications like drug and metabolite analyses.Limits ionization suppression and allows simple, MS-friendly mobile phases. Particle size 2.7um, 50 X 2.1mm (LengthxID)

Raptor Biphenyl LC Column (USP L11). Raptor Biphenyl LC Column (USP L11) Ideal for bioanalytical testing applications like drug and metabolite analyses.Limits ionization suppression and allows simple, MS-friendly mobile phases. Particle size 2.7um, 50 X 3.0mm (LengthxID)

Raptor Biphenyl LC Column (USP L11). Raptor Biphenyl LC Column (USP L11) Ideal for bioanalytical testing applications like drug and metabolite analyses.Limits ionization suppression and allows simple, MS-friendly mobile phases. Particle size 2.7um, 50 X 4.6mm (LengthxID)

Raptor Biphenyl LC Column (USP L11). Raptor Biphenyl LC Column (USP L11) Ideal for bioanalytical testing applications like drug and metabolite analyses.Limits ionization suppression and allows simple, MS-friendly mobile phases. Particle size 2.7um, 150 X 4.6mm (LengthxID)

Membrane Microfiltration Glassware 1000 mL Funnel, 4,000 mL Flask 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. Autoclavable borosilicate glass.

EXP Direct Connect Holder for EXP Guard Cartridges (includes hex-head fitting and 2 ferrules).

8270 Calibration Mix #1 (19 components), Restek - 31618, 1 ml/Ampule, 8270 Calibration Mix #1

8270 Calibration Mix #2 (11 components), Restek - 31619, 1 ml/Ampule, 8270 Calibration Mix #2

8270 Calibration Mix #3 (23 components), Restek - 31620, 1 ml/Ampule, 8270 Calibration Mix #3

Carbazole, Restek - 31836, 1 ml/Ampule, Carbazole

Replacement trap for use with the optional split vent trap assembly (no.23031), (2Traps/4 O-Rings).

Column LRC C8 SCX 40-60um 60a 130mg/10ml, 50/pk.

Column LRC SCX 40-60um 100mg/10ml, 50/pk.

Deactivated Fused Silica Insert 0. 32mm 2. 5M.

Copper Ignitor Tape for Optima 8x00, 50 pc, ICP-OES.

Alumina Injector, 1. 2 mm i. D. For Optima 8x00 ICP-OES.

Kit, Ultra Clean Triple Filter, 1 Triple Filter and 1 Position Base Plate - 1/8inch Brass.

Ultra Clean Combination Filter: Moisture/Hydrocarbon. High-purity output ensures 99. 9999% Pure gas, Ultra-high capacity

Ultra Clean Hydrocarbon Filter, HC capacity: 24 g.

Vacuum Manifold. Complete Set with 24 positions, Quantity 1, Accommodate either 12 or 24 cartridges; 1, 3, 6, 15 and 25 mL columns can be used. Manifolds are equipped with a vacuum port to connect a standard laboratory vacuum pump.

Vacuum Manifold, Complete Set with 12 Positions, Quantity 1.

Pressure Gauge with Needle for Vials.

HP5890 on-column interface kit. For connection to an on-column injector of an agilent 6890, Agilent 6850, Agilent 5890, or Agilent 5890 Series 2 gas chromatography. HP cable not included. Must be purchased from HP.

Shimadzu interface kit. For connection to the following Shimadzu gas chromatographs: GC 9a for capillary columns, 14A packed columns, 14B packed columns, 17A packed and capillary columns.

Air Filter. The PolyScience 13inch X 14inch Air Filter with Frame is a fully washable air filter which removes quickly for easy cleaning. For use with the PolyScience WhisperCool Refrigerated Chiller 240 V

Replacement Gas Filters for Restek Super Clean® Gas Filter Kits, Restek - 22022, Replacement Fuel Gas Filter (removes moisture and hydrocarbons)

Super Clean® Gas Filter Kits and Replacements, Restek - 22021, Fuel Gas Purification Kit

ZIC-HILIC 5UM,200A PEEK 100X2.1 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) PEEK 100 x 2.1 mm metal-free HPLC column

ZIC-HILIC 5UM,200A PEEK 250X4.6 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) PEEK x 4.6 mm metal-free HPLC column

ZIC-HILIC 5UM,200A PEEK 250X2.1 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) PEEK x 2.1 mm metal-free HPLC column

ZIC-HILIC 5UM,200A PEEK 100X4.6 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) PEEK 100 x 4.6 mm metal-free HPLC column

ZIC-PHILIC 5UM PEEK 100X2.1 1PC. SeQuant(R) ZIC(R)-pHILIC (5um polymer) PEEK 100 x 2.1 mm metal-free HPLC column

ZIC-PHILIC 5UM PEEK 150X2.1 1PC. SeQuant(R) ZIC(R)-pHILIC (5um polymer) PEEK 150 x 2.1 mm metal-free HPLC column

ZIC-PHILIC 5UM PEEK 50X2.1 1 UNI 1PC. SeQuant(R) ZIC(R)-pHILIC (5um polymer) PEEK 50 x 2.1 mm metal-free HPLC column

LISPHER RPSELB 5MYM CART150-4.6 1PC. LiChrospher(R) RP-select B (5um) LiChroCART(R) 150-4.6 HPLC cartridge

ZIC-HILIC 5UM,200A 150X21.2 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) 150 x 21.2 mm threaded stainless steel HPLC column

ZIC-HILIC 5UM,200A 50X21.2 1 UNI 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) 50 x 21.2 mm threaded stainless steel HPLC column

ZIC-HILIC 5UM,200A 250X10 1 UNIT 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) x 10 mm threaded stainless steel HPLC column

ZIC-HILIC 5UM,200A 150X10 1 UNIT 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) 150 x 10 mm threaded stainless steel HPLC column

ZIC-HILIC 5UM 5 X 0.3 MM 1 UNIT 1PC. SeQuant(R) ZIC(R)-HILIC (5um) 5 x 0.3 mm Guard (5 pc) guard column

ZIC-HILIC 3.5UM,100A 150 X 1 MM 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,100A) 150 x 1 mm capillary HPLC column

ZIC-HILIC 5UM,200A 150 X 1 MM 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) 150 x 1 mm capillary HPLC column

ZIC-HILIC 5UM,200A 150 X 0.3 MM 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) 150 x 0.3 mm capillary HPLC column

ZIC-HILIC 5UM,200A 150X0.075 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) 150 x 0.075 mm nano capillary HPLC column

ZIC-PHILIC 5UM PEEK 100 X 4.6 1PC. SeQuant(R) ZIC(R)-pHILIC (5um polymer) PEEK 100 x 4.6 mm metal-free HPLC column

ZIC-PHILIC 5UM PEEK 50 X 4.6 1PC. SeQuant(R) ZIC(R)-pHILIC (5um polymer) PEEK 50 x 4.6 mm metal-free HPLC column

ZIC-PHILIC GUARD PEEK 20X2.1 1 UNI 1PC. SeQuant(R) ZIC(R)-pHILIC Guard PEEK 20 x 2.1 mm metal-free guard column

ZIC-HILIC GUARD PEEK 20X2.1 1 UNIT 1PC. SeQuant(R) ZIC(R)-HILIC Guard PEEK 20 x 2.1 mm metal-free guard column

ZIC-HILIC 3.5UM,100A PEEK 150X2. 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,100A) PEEK 150 x 2.1 mm metal-free HPLC column

ZIC-HILIC 3.5UM,100A PEEK 100X2. 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,100A) PEEK 100 x 2.1 mm metal-free HPLC column

ZIC-HILIC 3.5UM,100A PEEK 50X2.1 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,100A) PEEK 50 x 2.1 mm metal-free HPLC column

ZIC-PHILIC GUARD KIT PEEK 20 X 2.1 1PC. SeQuant(R) ZIC(R)-pHILIC Guard Kit PEEK 20 x 2.1 mm metal-free guard column (3 pc) with coupler

ZIC-HILIC 3.5UM,100A PEEK 150X4. 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,100A) PEEK 150 x 4.6 mm metal-free HPLC column

ZIC-HILIC 3.5UM,100A PEEK 250X2. 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,100A) PEEK x 2.1 mm metal-free HPLC column

ZIC-HILIC 3.5UM,200A 150 X 1 MM 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,200A) 150 x 1 mm capillary HPLC column

ZIC-HILIC 3.5UM,200A 150 X 0.3 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,200A) 150 x 0.3 mm capillary HPLC column

ZIC-HILIC 3.5UM,200A 30 X 1 MM 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,200A) 30 x 1 mm capillary HPLC column

ZIC-HILIC 5UM,200A PEEK 50X2.1 1PC. SeQuant(R) ZIC(R)-HILIC (5um,200A) PEEK 50 x 2.1 mm metal-free HPLC column

ZIC-HILIC 3.5UM,200A PEEK 150X4. 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,200A) PEEK 150 x 4.6 mm metal-free HPLC column

ZIC-HILIC 3.5UM,200A PEEK 150X2. 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,200A) PEEK 150 x 2.1 mm metal-free HPLC column

ZIC-HILIC 3.5UM,200A PEEK 50X4.6 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,200A) PEEK 50 x 4.6 mm metal-free HPLC column

ZIC-HILIC 3.5UM,200A PEEK 50X2.1 1PC. SeQuant(R) ZIC(R)-HILIC (3.5um,200A) PEEK 50 x 2.1 mm metal-free HPLC column

Replacement Rotor (not coated) for 4-Port Sulfinert Gas Sampling Valve.

Sulfinert Gas Sampling W Type Valve, 4-Port-0.40 mm Diameter, 1/16inch Fittings, manual.

Sample Cylinder. Swagelok Sample Cylinder, High Pressure-1,800 psig, Stainless Steel, Sulfinert Treated, 2,250 cc, 1/4inch female NPT threads on both ends, 304L

Replacement Rotor (not coated) for 10-Port Sulfinert Gas Sampling Valve.

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, 1800 psig, 304L stainless steel, 300 cc, 1/4inch Female NPT Ends

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, 1800 psig, 304L, 150 cc, 1/4inch Female NPT Ends

Sample Cylinder. Ultra-High Pressure, Sulfinert Treated, 304L stainless steel; DOT rating to 1800 psig, 75 cc, 1/4inch Female NPT Ends

Sample Cylinder. High Pressure, Sulfinert treated, Stainless Steel, TPED, 1,450 psig, 304L-Stainless Steel, 1000cc, 1/4inch Female NPT Ends

Sample Cylinder. High Pressure, Sulfinert treated, 1,800 psig, 304L-Stainless Steel, 1000cc, 1/4inch Female NPT Ends

Sample Cylinder. High Pressure, Sulfinert treated, 1,800 psig, 304L-Stainless Steel, 500cc, 1/4inch Female NPT Ends

Replacement rotor (not coated) for 6-Port sulfinert gas sampling valve.

Survival Kit, PEEK, is an invaluable parts kit that contains tubing, fittings, and tools essential, PEEK tubing, connectors, and elbows, PTFE tubing, a tubing cutter and extra blades, a ValvTool wrench, open-end wrenches, For HPLC systems

Oven Temperature Sensor Assembly, for 6890 gas chromatography.

Category