• 0
Shop Products $

Vu2 Union Connector Kit, Fits Column ID: 0.32 mm, Includes: Vu2 Union body, knurled nuts (2), Press-Tight unions (2) and ferrules (4), Connect a guard column to an analytical column, Connect a column to a transfer line, Connect two columns in series, Repair a broken column

Flow Splitter. QuickSplit Post-Column Flow Splitter, Type: Replacement Adjustable Resistor Set, Post Column, Split Ratio: 5: 1 to 100: 1, pressure limit: 5,000 psi, Total flow: 0.1-5.0 mL/min, Adjustable metering valve gives convenient control of split ratio, Low dead volume

Autosampler PM Kit and 2690/2695 Pump, Preventive Maintenance Kit for HPLC Systems, Model Number: 2690, 2695

Flow Splitter. QuickSplit Post-Column Flow Splitter, Type: Replacement Adjustable Resistor Set, Post Column, Split Ratio: 1: 1 to 20: 1, pressure limit: 5,000 psi, Total flow: 0.1-5.0 mL/min, Adjustable metering valve gives convenient control of split ratio, Low dead volume

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Binary Fixed, Post Column, Split Ratio: 100: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Pump 600 PM Kit, Preventive Maintenance Kit for HPLC Systems, Model Number: 600 Pump, Includes: PerformancePLUS cartridges, sparge diffusers, Super Seals, solvent reservoir 10 um filters, sapphire plungers, reference valve button, valve disk spacer, valve disk, TFE ball plug

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Binary Fixed, Post Column, Split Ratio: 50: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Binary Fixed, Post Column, Split Ratio: 20: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Replacement Fixed Resistor Set, Post Column, Split Ratio: 20: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Replacement Fixed Resistor Set, Post Column, Split Ratio: 10: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Binary Fixed, Post Column, Split Ratio: 10: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Replacement Fixed Resistor Set, Post Column, Split Ratio: 5: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 100 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 150 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 200 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 250 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 100 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 150 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 200 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 250 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

Flow Splitter. QuickSplit Post-Column Flow Splitter, for HPLC & LC-MS, Type: Binary Fixed, Post Column, Split Ratio: 5: 1, pressure limit: 10,000 psi, Low dead volume, Total flow: 0.1-5.0 mL/min, Eliminates adjustments to capillary tubing for optimizing split ratio

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 30 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 4.6 mm. HPLC Column Tubing, ID: 4.6 mm, Length: 50 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

Autosampler 717 PM Kit, Preventive Maintenance Kit for HPLC Systems, Model Number: 717 Autosampler, Includes: seal pack assembly, tube assembly(0.020 inch ID), needle compression screw, 0.062 stainless steel ferrule, pre-column filter assembly, insert, 250uL WISP syringe

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 30 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

HPLC Column Tubing 2.1 mm. HPLC Column Tubing, ID: 2.1 mm, Length: 50 mm, OD: 1/4 inch, fine, Material: chromatographic-grade 316 stainless steel. It is corrosion resistant, ultrasonically cleaned and passivated

Head Plunger Seals, Black, for HPLC Systems, Model Number: 2690, 2695, 2790, 2795.

Funnel 100 mL. Funnel, Size: 100 mL, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Funnel 500 mL. Funnel, Size: 500 mL, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Fritted Glass Support, 40/35 Joint, 47 mm filtration apparatus with fritted glass support for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Funnel 1000 mL. Funnel, Size: 1000 mL, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Pump Piston Rod. ASI Replacement HPLC Pump Piston Rod, for HPLC System, Material: Sapphire, Model Number: 1090, Buffer salts and metals from HPLC system become imbedded on the surface of the piston seal and gradually wear the surface of the piston rod, Worn regions will quickly destroy pump seal

Secure-Fit Fitting Single Connector. Secure-Fit Fitting, Single Connector, ID: 0.007 inch, Length: 20 cm, Material: PEEK, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

Secure-Fit Fitting Single Connector. Secure-Fit Fitting, Single Connector, ID: 0.007 inch, Length: 30 cm, Material: PEEK, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

Inlet Check Valve, for HPLC Systems, Model Number: LC-600, LC-9A, LC-10AD.

In-Line Mixer 150ul. In-Line Mixer, HyperShear Static, Material: Stainless Steel, Volume: 150 uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

In-Line Mixer 250ul. In-Line Mixer, HyperShear Static, Material: Stainless Steel, Volume: 250 uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

Plunger Seal, Gold, for HPLC Systems, Model Number: 1515, 1525, 510, 515, 600, 610, LC Module 1, Graphite-filled PTFE; best for organic solvents, Ultra-high molecular weight polyethylene increased resistance to abrasion, best for buffers

Piston Seals, PTFE with Graphite, Black, for HPLC Systems, Model Number: 1050, 1100, 1200, Graphite-filled PTFE; best for organic solvents

XF Filter Fitting Replacement for Trident Integral Guard System, Convenient and economical leak-free guard cartridge system, Versatile configuration protects against all levels of contamination, Integral design eliminates troublesome tubing connections

XG Fitting 1cm for Trident Integral Guard System, Convenient and economical leak-free guard cartridge system, extremely easy to install, Versatile configuration protects against all levels of contamination, Integral design eliminates troublesome tubing connections

Column End-Fitting with Distribution Cone, Fittings with distribution cone are intended for use on 3.0-4.6 mm ID HPLC columns, 1/4 inch compression end-fittings are compatible with 1/16 inch connecting tubing using Valco and Parker fittings

Open Supply Bin, Size: 12 x 12 x 7.5 inch (13-Bin Unit), Multiple-bin units for large/small items, Used individually or end-to-end along bench

MiniPulse Pulse Dampener, Material: Stainless Steel, Compact unit (2.5x 1.5inch), Small, 160 uL dead volume at atmospheric pressur, Can withstand pressures to 6,000 psi (41,369 kPa), Improve system baseline stability while increasing the total system volume by only 160 uL

Vespel Rotor Seal for HPLC Systems: Rheodyne Style, Model Number: 1090, 7000, 7010, 7040, 7067.

Vespel Rotor Seal for HPLC Systems: Rheodyne Style, Model Number: 7125, 7126, 7725, 7725i, 9725.

UltraShield UHPLC PreColumn Filter, Porosity: 0.5 um frit, Inlet/Outlet: Female/Male 10-32, Universal fit, Pressure: 15,000 psi, Filter: 0.5 um or 0.2 um titanium frit in a stainless steel body with PEEK ferrule, Wrench Flat: 5/16 inch, Cost-effective protection

Cap Frits Replacement for Trident Guard Cartridges, Internal Diameter: 2 mm, Porosity: 2.0 um, prevent clogged cartridges to extend the life of column, cartridge

Blade Replacement for Clean-Cut Tubing Cutter.

Hand-Tight Fitting. EXP Hand-Tight Fitting (Nut with Hybrid Ferrule), Reusable Fittings for HPLC & UHPLC for 10-32 fittings and 1/16 inch tubing, Hand-tight fitting style achieves effortless HPLC seals, Compatible with 1/16 inch PEEK and stainless steel tubing, ZDV (zero dead volume) connection

Microfiltration Glassware. Funnel 300ml Flask 1000ml, For Membrane Microfiltration Glassware, 47 mm filtration apparatus with fritted glass support is for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, autoclavable

Secure-Fit Fitting Two Connector. Secure-Fit Fitting, Two Connector, ID: 0.007 inch, Length: 10 cm, Material: Stainless Steel, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

In-Line Mixer 50ul. In-Line Mixer, HyperShear Static, Material: Stainless Steel, Volume: 50uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization

Funnel 300 mL. Funnel, Size: 300 mL, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Glove Box Dispenser, Size: 15 1/8 x 11 x 4 1/4 inch (Triple), Fit most glove boxes; allow quick access, Include holes on back plate for permanent mounting (hardware not included)

Check Valve Cartridge. PerformancePLUS Check Valve Cartridge, for HPLC Systems, Model Number: 1515, 1525, 2690, 2695, 2795, 510, 515, 600, 610

Head Plunger Seals, Gold, for HPLC Systems, Model Number: 2690, 2695, 2790, 2795.

Hand-Tight Fitting. EXP Hand-Tight Fitting (Nut with Hybrid Ferrule), Reusable Fittings for HPLC & UHPLC for 10-32 fittings and 1/16 inch tubing, Hand-tight fitting style achieves effortless HPLC seals, Compatible with 1/16 inch PEEK and stainless steel tubing, ZDV (zero dead volume) connection

Plunger Seal, Black, for HPLC Systems, Model Number: LC-10AD, 10ADvp, LC-20AD/AB, LC-600, LC-2010 A/C HT, LC-9A, Graphite-filled PTFE; best for organic solvents, Ultra-high molecular weight polyethylene increased resistance to abrasion, best for buffers

Seal Wash Kit, Binary Pump (4 seals, 4 gaskets), for HPLC Systems, Model Number: 1050, 1100, 1200.

Plunger Seal, Material: Polyethylene, Gold, for HPLC Systems, Model Number: LC-10Ai, 10AS, 10AT, 10ATvp, LC-7A, Graphite-filled PTFE; best for organic solvents, Ultra-high molecular weight polyethylene increased resistance to abrasion, best for buffers

Sapphire Plunger for HPLC Systems, Model Number: 2690, 2695, 2790, 2795, 2796.

Ferrule for use with Secure-Fittings, Size: 1/16 inch, Material: Stainless Steel.

Deuterium Lamp, for HPLC Systems, Model Number: SPD-10, 10A, 10AVvp, SPD-20A, SPD-20AV.

PEEK Tubing Elbow, Size: 180 deg, ideal for routing 1/16 inch PEEK tubing through system. Simply snap the tubing into the elbow. Prevent pinching of PEEK tubing, which can cause high pressure

Aluminum Clamp, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Secure-Fit Fitting Single Connector. Secure-Fit Fitting, Single Connector, ID: 0.005 inch, Length: 10 cm, Material: Stainless Steel, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

Secure-Fit Fitting Single Connector. Secure-Fit Fitting, Single Connector, ID: 0.007 inch, Length: 30 cm, Material: Stainless Steel, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

PEEK Tubing Elbow, Size: 90 deg, ideal for routing 1/16 inch PEEK tubing through system. Simply snap the tubing into the elbow. Prevent pinching of PEEK tubing, which can cause high pressure

UltraShield UHPLC PreColumn Filter, Porosity: 0.2 um frit, Inlet/Outlet: Female/Male 10-32, Universal fit, Pressure: 15,000 psi, Filter: 0.5 um or 0.2 um titanium frit in a stainless steel body with PEEK ferrule, Wrench Flat: 5/16 inch, Cost-effective protection

Flask 2000 mL. Flask, 40/35 Joint, Size: 2000 mL, 47 mm filtration apparatus with fritted glass support for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Flask 4000 mL. Flask, 40/35 Joint, Size: 4000 mL, 47 mm filtration apparatus with fritted glass support for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Guard Cartridge Holder. Holder with filter for 10 mm guard cartridge, Trident HPLC In-Line Guard Cartridge Holder, used with almost any HPLC column by connecting it with a short piece of 1/16 inch tubing, appropriate nuts and ferrules or finger-tight fittings

PEEK Tip for CPI Fitting, Replacement parts for the Trident Direct Column Protection System.

Secure-Fit Fitting Single Connector. Secure-Fit Fitting, Single Connector, ID: 0.005 inch, Length: 6 cm, Material: Stainless Steel, consistent, leak-free seal-and they eliminate excess dead volume, internal spring mechanism holds the capillary tubing at the proper depth in the female fitting

Graduated Safety-Coated Bottle, GL-45 threads, Size: 1L.

Graduated Safety-Coated Bottle, GL-45 threads, Size: 2L.

Sapphire Plunger Assembly Kit, for HPLC Systems, Includes: sapphire plunger, pivot insert, pivot guide, washer, spring, retaining ring, Model Number: 515, 1515, 1525

Flask 1000 mL. Flask, 40/35 Joint, Size: 1000 mL, 47 mm filtration apparatus with fritted glass support for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Check Valve Cartridge, for HPLC Systems, Model Number: 2690, 2695, 2790, 2795.

Seal Wash Plunger Seal, for HPLC Systems, Model Number: 2690, 2695, 2790, 2795.

UltraShield UHPLC PreColumn Filter, Porosity: 0.2 um frit, Inlet/Outlet: Female/Male 10-32, Universal fit, Pressure: 15,000 psi, Filter: 0.5 um or 0.2 um titanium frit in a stainless steel body with PEEK ferrule, Wrench Flat: 5/16 inch, Cost-effective protection

Outlet Cap and Gold Seal Assembly, for HPLC Systems, Model Number: 1050, 1100, 1200, Caps and seals unassembled, Not compatible for use with Outlet Cap and Gold Seal Assembly Tool

Guard Cartridge Holder. Holder for 10 mm guard cartridge, Trident HPLC In-Line Guard Cartridge Holder, used with almost any HPLC column by connecting it with a short piece of 1/16 inch tubing, appropriate nuts and ferrules or finger-tight fittings

HPLC Frit 1/4 inch, Internal Diameter: 4.6 mm, Porosity: 0.5 um, chromatographic-grade 316 stainless steel, to fit most column and pore sizes

HPLC Frit 1/4 inch, Internal Diameter: 3.2 mm, Porosity: 0.5 um, chromatographic-grade 316 stainless steel, to fit most column and pore sizes

Column End-Fitting with Flat Bottom, Fittings with flat bottom are intended for use on 1.0-3.0 mm ID HPLC columns, 1/4 inch compression end-fittings are compatible with 1/16 inch connecting tubing using Valco and Parker fittings

Survival Kit for HPLC, Material: Stainless Steel, For start-up and maintenance in all HPLC systems, contains a wide range of tubing, fittings and tools, selection of lengths and IDs of 1/16-inch tubing, plus nuts, ferrules, a ValvTool wrench and a zero-dead-volume union

TopLoader BalanceBank Storage Unit, Size: 12 x 12 x 7 inch, Provides easy access to wipers, weigh papers, boats and spatulas, Creates a neat, highly functional weighing area and workstation

Open Supply Bin, Size: 24 x 12 x 10 inch (4-Bin Unit), Multiple-bin units for large/small items, Used individually or end-to-end along bench

Open Supply Bin, Size: 12 x 16 x 10.5 inch (5-Bin Unit), Multiple-bin units for large/small items, Used individually or end-to-end along bench

FlatLine Pulse Damper, Size: 1.5 inch W x 3.75 inch L, Rupture-proof, no diaphragm-minimal risk of failure or leaks, Clean flush-out design-no sample carryover, Low internal volume-negligible effect on analyte bandwidth, Standard 10-32 inlet and outlet ports

Isolation Seal for HPLC Systems: Rheodyne Style, Model Number: 7010.

Flask Cap, 40/35 Outer Joint, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: borosilicate glass, For Membrane Microfiltration Glassware, autoclavable

Organizer. Deluxe BenchBooster Organizer, Ten compartments, plus a wiper dispenser, Lightweight, movable, wall-mountable, Size: 24 x 7 x 12 inch

Piston Seal, Black, ASI for HPLC System, Model Number: 1050, 1100, Material: PTFE with an additive that reduces their tendency to cold flow and improves their wear characteristics, more resistant to any HPLC solvent than UHMWPE seals, but they are less wear-resistant and rugged

Check Valve Housing. PerformancePLUS Check Valve Housing, for HPLC Systems, Model No: 1515, 1525, 510, 515, 525, 600, 610

Plunger Seal, Black, for HPLC Systems, Model Number: 1515, 1525, 510, 515, 600, 610, LC Module 1, Graphite-filled PTFE; best for organic solvents, Ultra-high molecular weight polyethylene increased resistance to abrasion, best for buffers

Plunger Rinse Seal, for HPLC Systems, Model Number: LC-10Ai, LC-10AS, LC-10AT, LC-10ATvp.

UltraShield UHPLC PreColumn Filter, Porosity: 0.5 um frit, Inlet/Outlet: Female/Male 10-32, Universal fit, Pressure: 15,000 psi, Filter: 0.5 um or 0.2 um titanium frit in a stainless steel body with PEEK ferrule, Wrench Flat: 5/16 inch, Cost-effective protection

Category