• 0
Shop Products $

Piston Seal. ASI Piston Seal for HPLC System, Model Number: 1050, 1100, Material: PTFE with an additive that reduces their tendency to cold flow and improves their wear characteristics, more resistant to any HPLC solvent than UHMWPE seals, but they are less wear-resistant and rugged

ValvTool Wrench, time-saving device that provides easy access to many hard-to-reach Rheodyne or Valco valves. For 1/4 inch nuts

Joint Sleeve, 40/35 joint, 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents, ground joint, Material: PTFE, For Membrane Microfiltration Glassware, autoclavable

Seal Gold Disk. Seal, Gold Disk (outlet), for HPLC Systems, Model Number: 1050, 1100, 1200, Not compatible for use with Outlet Cap and Gold Seal Assembly Tool

Outlet Cap and Gold Seal Assembly Tool for 1050, 1100 HPLC Systems, Easily install the gold seal into the outlet cap, For use with gold disk seal only

Seal Wash Kit (2 seals, 2 gaskets), for HPLC Systems, Model Number: 1050, 1100, 1200.

Pack in a Box Kit, complete column-packing system, Pressure ( maximum): 10,000 psi, HPLC Column Packing Station Includes pump, 20 mL reservoir, column hardware (150 x 4.6 mm, tubing with end-fittings, frits, nuts and ferrules, empty columns) and system control software

Mini pHPerch Storage Unit, Size: 13 x 12 x 6 inch, Designed for pH meter supplies, Small footprint, high storage capacity, easy access, built-in wiper dispenser

Super Seal for Analytical Heads, for HPLC Systems, Model Number: M6KA,1515, 1525, 510, 515, 590, 600, 610, LC Module 1

LC Piston Seal Insertion Tool, Simplify pump maintenance: use one end to remove your old seal, slip your new seal on the other end and push it flush into position. The tool cannot mar the surrounding metal surface of the pump housing

Crimp Vial Convenience Kit, for 2.0 mL, 11 mm Crimp-Top Vials, Includes: Amber 2.0 mL Vial, Untreated, Silver Seal, PTFE/Silicone Septa, Vials packaged in a clear-lid tray with Caps and septa

Crimp Vial Convenience Kit, for 2.0 mL, 11 mm Crimp-Top Vials, Includes: Amber 2.0 mL Vial, Untreated, Silver Seal, PTFE/Silicone Septa, Vials packaged in a clear-lid tray with Caps and septa

WISP Step Vial. WISP 48 Step Vial, For an instrument reference for 4.0 mL WISP 48 Style Vial, Modification: with White Graduated Marking Spot, Type: Screw-Thread, Volume: 4.0 mL, Color: Clear, Vial Size: 15 x 45 mm, Cap Size: 13 mm/425

WISP Step Vial. WISP 48 Step Vial, For an instrument reference for 4.0 mL WISP 48 Style Vial, Modification: with White Graduated Marking Spot, Type: Screw-Thread, Volume: 4.0 mL, Color: Amber, Vial Size: 15 x 45 mm, Cap Size: 13 mm/425

WISP 48 Snap Seal Vial, For an instrument reference for 4.0 mL WISP 48 Style Vial, Modification: with White Graduated Marking Spot, Type: Crimp-Top, Volume: 4.0 mL, Color: Clear, Vial Size: 15 x 45 mm, Cap Size: 13 mm

WISP 48 Snap Seal Vial, For an instrument reference for 4.0 mL WISP 48 Style Vial, Modification: with White Graduated Marking Spot, Type: Crimp-Top, Volume: 4.0 mL, Color: Clear, Vial Size: 15 x 45 mm, Cap Size: 13 mm

Short Screw Cap, Type: Screw-Thread, Color: Mixed, Septa Material: PTFE/Butyl Rubber, 2.0 mL, 9 mm Short-Cap, Screw-Vial Closure (preassembled)

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.045inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.045 inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.045 inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.045inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Screw-Thread Vial Kit (Preassembled), 8 mm/425 Screw-Thread, Unmarked Vials, Septa and Cap, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065, Caps attached to vial, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Preassembled Vial Kit, 8 mm Screw-Thread, Unmarked Vials, Septa and Caps, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference for 2.0 mL, 8 mm Screw-Thread Vials, Caps attached to vial

Autosampler Vial Convenience Kit, for 2.0 mL, 8 mm Screw-Thread Vials, Includes: Clear 2.0 mL Vial, Silcote Deactivated, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, Vials packaged in a clear-lid tray with Preassembled caps and septa

Autosampler Vial Convenience Kit, for 2.0 mL, 8 mm Screw-Thread Vials, Includes: Clear 2.0 mL Vial, Silcote Deactivated, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, Vials packaged in a clear-lid tray with Preassembled caps and septa

Big Mouth Step Vial Kit (Preassembled), with Black Cap, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference chart for 2.0 mL, 10 mm Screw-Thread Vial

Big Mouth Step Vial Kit (Preassembled), with Black Cap, Includes: Clear 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference chart for 2.0 mL, 10 mm Screw-Thread Vial

Big Mouth Step Vial Kit (Preassembled), with Black Cap, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference chart for 2.0 mL, 10 mm Screw-Thread Vial

Big Mouth Step Vial Kit (Preassembled), with Black Cap, Includes: Amber 2.0 mL Vial, Black Cap, Red PTFE/Silicone Septa, 0.065 inch, For an instrument reference chart for 2.0 mL, 10 mm Screw-Thread Vial

Crimp Vial Convenience Kit, for 2.0 mL, 11 mm Crimp-Top Vials, Includes: Clear 2.0 mL Vial, Untreated, Silver Seal, PTFE/Silicone Septa, Vials packaged in a clear-lid tray with Caps and septa

Crimp Vial Convenience Kit, for 2.0 mL, 11 mm Crimp-Top Vials, Includes: Clear 2.0 mL Vial, Untreated, Silver Seal, PTFE/Silicone Septa, Vials packaged in a clear-lid tray with Caps and septa

Mininert Precision Sampling Valve for Vials, Type: Screw-Thread, Cap Size: 20 mm/400, very convenient for repetitive sampling and limit content exposure to the silicon septum, Turn the threaded flange to secure a tight fit

Mininert Precision Sampling Valve for Vials, Type: Screw-Thread, Cap Size: 24 mm/400, very convenient for repetitive sampling and limit content exposure to the silicon septum, Turn the threaded flange to secure a tight fit

Mininert Precision Sampling Valve for Vials, Type: Crimp-Top, Cap Size: 20 mm, very convenient for repetitive sampling and limit content exposure to the silicon septum, crimp-top valve for 20 mm ID glassware slides into the neck of the vial

Poly Crimp Seals and Liner, Type: Crimp-Top, Color: Clear, Septa Material: PTFE/Butyl Rubber, 2.0 mL, 11 mm, Snap-On or Crimp, versatile, use a standard crimping tool to secure the Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner, Type: Crimp-Top, Color: Clear, Septa Material: PTFE/Butyl Rubber, 2.0 mL, 11 mm, Snap-On or Crimp, versatile, use a standard crimping tool to secure the Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner (Snap-On or Crimp) 2.0 mL, 11 mm, Type: Crimp-Top, Color: Clear, Septa Material: PTFE/Silicone, versatile, working as either a snap-on or crimp-top cap, Simply use standard crimping tool to secure Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner (Snap-On or Crimp) 2.0 mL, 11 mm, Type: Crimp-Top, Color: Blue, Septa Material: PTFE/Silicone, versatile, working as either a snap-on or crimp-top cap, Simply use standard crimping tool to secure Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner (Snap-On or Crimp) 2.0 mL, 11 mm, Type: Crimp-Top, Color: Clear, Septa Material: PTFE/Silicone/PTFE, versatile, working as either a snap-on or crimp-top cap, Simply use standard crimping tool to secure Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner (Snap-On or Crimp) 2.0 mL, 11 mm, Type: Crimp-Top, Color: Blue, Septa Material: PTFE/Silicone/PTFE, versatile, working as either a snap-on or crimp-top cap, Simply use standard crimping tool to secure Poly Crimp seal onto any crimp-top vial

Poly Crimp Seals and Liner (Snap-On or Crimp) 2.0 mL, 11 mm, Type: Crimp-Top, Color: Blue, Septa Material: PTFE/Silicone/PTFE, versatile, working as either a snap-on or crimp-top cap, Simply use standard crimping tool to secure Poly Crimp seal onto any crimp-top vial

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Green, Septa Material: PTFE/Silicone, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume taken)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Yellow, Septa Material: PTFE/Silicone, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume taken)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Black, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Black, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Green, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Natural, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Natural, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Screw-Vial Closure 2mL, 9 mm Short-Cap, Type: Screw-Thread, Color: Yellow, Septa Material: PTFE/Silicone/PTFE, preassembled, to reduce the risk of needle bending, release vacuum from high-volume injections and improve injection reproducibility (greater than 20% of vial volume)

Insert 100 uL. Insert, Modification: with Polypropylene Bottom Spring, Volume: 100 uL, Material: Glass, for 2.0 mL, 8 mm Screw-Thread Vials

Insert 250 uL. Insert, Modification: Flat Bottom, Volume: 250 uL, Material: Glass, Application: for 2.0 mL, 8 mm Screw-Thread Vials

Insert 250 uL. Insert, Modification: No Spring, Volume: 100 uL, Material: Polypropylene, Application: for 2.0 mL, 8 mm Screw-Thread Vials

Big Mouth Insert 250 uL. Big Mouth Insert, Modification: No Spring, Volume: 250 uL, for 2.0 mL, 11 mm Crimp-Top and 2.0 mL, 9 mm Short-Cap, Screw-Thread Vials

Vial 2.0 mL. Vial, Modification: with White Graduated Marking Spot, Type: Screw-Thread, Volume: 2.0 mL, Color: Clear, Vial Size: 12 x 32 mm, Cap Size: 8 mm/425,

Vial 2.0 mL. Vial, Modification: withWhite Graduated Marking Spot, Type: Screw-Thread, Volume: 2.0 mL, Color: Amber, Vial Size: 12 x 32 mm, Cap Size: 8 mm/425

Vial 2.0 ml. Vial, Modification: with 100 uL Polypropylene Insert, Type: Screw-Thread, Volume: 2.0 mL, Color: Clear, Material: Plastic, Cap Size: 8 mm/425, Choice of glass or fused polypropylene insert

Micro-Vial Open Top Cap (attached) 1.0 mL. Micro-Vial, Open Top Cap (attached), Modification: with Graduated Marking Spot, Type: Screw-Thread, Volume: 1.0 mL, Color: Clear, Material: Borosilicate Glass, Cap Size: 13 mm/42, Tapered for high recovery of contents, Work with Mininert sampling valves

Micro-Vial Open Top Cap (attached) 3.0 mL. Micro-Vial, Open Top Cap (attached), Modification: with Graduated Marking Spot, Type: Screw-Thread, Volume: 3.0 mL, Color: Clear, Material: Borosilicate Glass, Cap Size: 20 mm/400, Tapered for high recovery of contents, Work with Mininert sampling valves

Short-Cap Vial 2.0 mL. Short-Cap Vial, Modification: with White Graduated Marking Spot, IP Deactivated, Type: Screw-Thread, Volume: 2.0 mL, Color: Amber, Vial Size: 12 x 32 mm, Cap Size: 9 mm

Septa, Material: Red PTFE/White Silicone, Size: 8 mm x 0.065in.

Septa, Septa Material: Red PTFE/White Silicone, size: 0.060in for 2.0 mL Big Mouth Step Vials.

Headspace Vial 27 mL. Headspace Vial, Modification: Flat Bottom,Type: Crimp-Top, Volume: 27 mL, Color: Clear,Vial Size: 30 x 60 mm,Cap Size: 20 mm

Headspace Vial 27 mL. Headspace Vial,Modification: Flat Bottom,Type: Crimp-Top,Volume:27 mL,Color: Clear,Vial Size: 30 x 60 mm,Cap Size:20 mm

Headspace Vial 20 mL. Headspace Vial,Modification:Rounded Bottom,Type:Crimp-Top,Volume:20 mL,Color:Clear,Vial Size:23 x 75 mm,Cap Size:20 mm

Headspace Vial 10 mL. Headspace Vial, Modification:Rounded Bottom, Type:Crimp-Top, Volume:10 mL, Color:Clear, Vial Size:23 x 46 mm, Cap Size:20 mm

Headspace Vial 10 mL. Headspace Vial, Modification:Rounded Bottom, Deactivated, Type:Crimp-Top, Volume:10 mL, Color:Clear, Vial Size:23 x 46 mm, Cap Size:20 mm

Headspace Vial 6 mL. Headspace Vial, Modification:Flat Bottom, Type:Crimp-Top, Volume:6 mL, Color:Clear, Vial Size:22 x 38 mm, Cap Size:20 mm

Headspace Vial 6 mL. Headspace Vial, Modification:Flat Bottom, Type:Crimp-Top, Volume:6 mL, Color:Clear, Vial Size:22 x 38 mm, Cap Size:20 mm

Cap 12 x 32 mm. Cap, Type:Screw-Thread, Modification: Open-Hole, Color: Black, Material: Polypropylene, size: 12 x 32 mm, or 2.0 mL, 8 mm Screw-Thread Vials, vial-based autosamplers

Septa, Septa Material:Red PTFE/Silicone, Size:8 mm x 0.060 in.

Autosampler Vial Convenience Kit, Includes: Clear 2.0 mL Vial, Untreated, Black Cap, Red PTFE/Silicone Septa, 0.065in

Autosampler Vial Convenience Kit, Includes: Amber 2.0 mL Vial, Untreated, Black Cap, Red PTFE/Silicone Septa, 0.065in

Crimp Vial Convenience Kit, Includes:Clear 2.0 mL Vial, Untreated, Silver Seal, PTFE/Natural Rubber Septa

Cap and Septa 12 x 32 mm. Cap and Septa, Preassembled, Type: Screw-Thread, Modification: Top Hat, Color:Black, Septa Material:PTFE/Silicone, size: 12 x 32 mm, Fit all 2.0 mL, for 8 mm/425 vial-based autosamplers

Cap and Septa 12 x 32 mm. Cap and Septa, Preassembled, Type:Screw-Thread, Modification:Top Hat, Color:Black, Septa Material:PTFE/Silicone, size: 12 x 32 mm, Fit all 2.0 mL, for 8 mm/425 vial-based autosamplers

Cap and Septa, Preassembled, Type: Screw-Thread, Septa Material: PTFE/Silicone/PTFE, 0.040in.

Aluminum Seal with Septa, size: 11mm, 5 Asst Colors, Septa material: PTFE Silicone.

Poly Crimp Seal and Liner 11 mm. Poly Crimp Seals and Liner, Type: Crimp-Top, Color: Mixed, Septa Material: PTFE/Silicone/PTFE, Volume: 2.0 mL, size: 11 mm, versatile, working as either a snap-on or crimp-top cap, use a standard crimping tool to secure the Poly Crimp seal onto any crimp-top vial

Snap Ring Cap with Liner, Type:Snap-Top, Color: Clear, Septa Material: PTFE, 10 mil, Material: Polypropylene, Snaps on any crimp-style vial

Snap Ring Cap with Liner, Type:Snap-Top, Color:Clear, Septa Material:PTFE, 10 mil, Material:Polypropylene, Snaps on any crimp-style vial

Snap Ring Cap with Liner, Type:Snap-Top, Color:Clear, Septa Material:PTFE, 10 mil, Material:PTFE/Butyl Rubber, Snaps on any crimp-style vial

WISP 48 Cap, Type:Screw-Thread, Material:Black Polypropylene, Open-Hole.

WISP 48 Cap and Septa, Preassembled, Type: Screw-Thread, Septa Material: Red PTFE/Silicone, 0.065in.

WISP 48 Cap and Septa, Preassembled, Type: Screw-Thread, Septa Material: Red PTFE/Silicone.

WISP 48 Cap and Septa, Preassembled, Type: Screw-Thread, Septa Material: Red PTFE/Silicone.

Septa, Material:Red PTFE/Silicone, 0.060in, Size:13 mm x 0.060in.

Septa, Material:Red PTFE/Silicone/PTFE, 0.040in, Size:13 mm x 0.040in.

WISP 48 Seal with Septa 13 mm. WISP 48 Seal with Septa, Type: Crimp-Top, Color: Silver, Septa Material: PTFE/Butyl Rubber, Material: Aluminum, size: 13mm, for 4.0 mL WISP Crimp-Top Vials

WISP 48 Seal with Septa 13 mm. WISP 48 Seal with Septa, Type: Crimp-Top, Color: Silver, Septa Material: PTFE/Butyl Rubber, Material: Aluminum, size: 13mm, for 4.0 mL WISP Crimp-Top Vials

WISP 48 Seal with Septa 13 mm. WISP 48 Seal with Septa, Type: Crimp-Top, Color: Silver, Septa Material: PTFE/Silicone, Material: Aluminum, size: 13mm, for 4.0 mL WISP Crimp-Top Vials

Pressure Release Seal with Septa 20 mm. Pressure Release Seals wih Septa, 20 mm, preassembled, Type: Crimp-Top, Color: Silver, Septa Material: PTFE/Gray Butyl Rubber, Material: Aluminum

Pressure Release Seal with Septa 20 mm. Pressure Release Seals wih Septa, 20 mm, preassembled, Type: Crimp-Top, Color: Silver, Septa Material: PTFE/silicone, Material: Aluminum

Starburst Snap Plug 8 x 40 mm. Starburst Snap Plugs for Shell Vials, Type: Shell, Color: Clear, Material: Polyethylene, size: 8 x 40 mm

Starburst Snap Plug 8 x 40 mm. Starburst Snap Plugs for Shell Vials, Type: Shell, Color: Clear, Material: Polyethylene, size: 8 x 40 mm

Starburst Snap Plug 8 x 40 mm. Starburst Snap Plugs for Shell Vials, Modification: conical, Type: Shell, Color: Clear, Material: Polyethylene, size: 8 x 40 mm

Starburst Snap Plug 8 x 40 mm. Starburst Snap Plugs for Shell Vials, 1.0 mL WISP 96 Style, Modification: Silicone-Lined, Type: Shell, Color: Clear, Material: Polyethylene, size: 8 x 40 mm

Starburst Snap Plug 8 x 40 mm. Starburst Snap Plugs for Shell Vials, 1.0 mL WISP 96 Style, Modification: Silicone-Lined, Type: Shell, Color: Clear, Material: Polyethylene, size: 8 x 40 mm

Insert 350 uL. Insert, Modification:Flat Bottom, Volume:350 uL, Material:Glass, for 2.0 mL, 10 mm Big Mouth Step Design Screw-Thread Vials

Category