• 0
Shop Products $

Fittings, Reducing Union, Sulfinert, Material: Siltek/Sulfinert-Treated, Size: 1/4inch to 1/8inch.

Fittings, Sulfinert, Zero Dead Volume Union, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Plug, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Plug, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Cross, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Filter Base Plate, Material: Stainless Steel, Size: Single-Position, End fittings available in brass or stainless steel. Base plates fit all stand alone Super Clean gas filters offered, 1/8 FITTINGS

Back Ferrule, Material: Stainless Steel, Size: 1/16inch.

Plug, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Zero Dead Volume Tee, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Ultra-High-Purity Regulator, with CGA Fittings, Material: Stainless Steel, Type: Single-Stage, Fittings: CGA 580 (N2, He, Ar), Outlet Gauge: 30inch, 0 to 200 psig (0G1,379 kPa), Outlet Pressure: 0 to 150 psig (0G1,034 kPa)

Automatic Switchover System With Line Regulator For Use with H2, P5(CGA 350), Material: Brass, High-purity automatic switchover systems provide a continuous supply of high-purity gas to the laboratory, process, or instrument

Ball Valve, Size: 1/4inch, Material: Stainless Steel, Shut-Off Gas 2-Way Valve.

Hydrogen Flashback Arrestor, Material: Brass Body, Fittings: 1/4inch Female NPT, Valve cuts off gas supply in the event of a flashback. Meets safety requirements of BS6158, EN730, ISO 5175, AS 4603 and are UL Listed 23Y5.

Gas Pressure Gauge Kit, for Thermal Gas Purifiers, Use an in-line pressure gauge to indicate when a thermal gas purifier getter tube should be replaced. Includes 1/8inch tee and 0G100 psi (0-689k Pa) gauge.

Nut, Material: Brass, Size: 1/8inch.

Nut, Material: Brass, Size: 1/4inch.

Tee, Material: Brass, Size: 1/4inch.

Toggle Valve, Size: 1/4inch, Material: Stainless Steel, Shut-Off Gas Valve.

Ball Valve, Size: 1/8inch, Material: Brass, Shut-Off Gas Valve, 2-WAY BALL.

Ball Valve, Size: 1/4inch, Material: Brass, Shut-Off Gas Valve, 2-WAY BALL.

Plug Valve, Size: 1/8inch, Material: Stainless Steel, Shut-Off Gas Valve.

Helium Purifier Module, Fittings: Compression Tube Fittings 1/4inch, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air. Reduce gas impurities from ppm to low ppb levels.

Hydrogen Purifier Module, Fittings: Compression Tube Fittings 1/4inch, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air. Reduce gas impurities from ppm to low ppb levels.

Hydrogen Purifier Module, Fittings: Compression Tube Fittings 1/8inch, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air. Reduce gas imp

Nitrogen Purifier Module, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air. Reduce gas impurities from ppm to low ppb levels. Max Pressure: 1000psi, 6895kPa

Air Purifier Module, Gas-Specific, Fittings: Compression Tube Fittings 1/4inch, Max Pressure: 1000psi, 6895kPa, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air.

Air Purifier Module, Gas-Specific, Fittings: Compression Tube Fittings 1/8inch, Max Pressure: 1000psi, 6895kPa, Replace separate oxygen, moisture, and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen, or air.

Tee, Material: Stainless Steel, Size: 1/16inch.

Cylinder Holder, Wall Mounted, Size: Single, designed to prevent free-standing gas cylinders from tipping over and injuring personnel. The cast aluminum holder can be secured to a wall or the side of a work bench. Diameter: 4-15 inch

Union, Material: Siltek/Sulfinert-Treated, Size: 1/16inch.

Tee, Material: Stainless Steel, Size: 1/8inch.

Tee, Material: Stainless Steel, Size: 1/4inch.

Toggle Valve, Size: 1/8inch, Material: Brass, Shut-Off Gas Valve.

Toggle Valve, Size: 1/4inch, Material: Brass, Shut-Off Gas Valve.

Union, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Elbow, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Elbow, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Union, Material: Silcosteel-CR Treated, Size: 1/16inch.

Union, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Tee, Material: Siltek/Sulfinert-Treated, Size: 1/16inch.

Union, Material: Silcosteel-CR Treated, Size: 1/8inch.

Universal Cylinder Wrench, versatile wrench for tightening gauges and gas regulator CGA fittings to cylinder outlets and pipe thread connections

Plug Valve, Size: 1/8inch, Material: Brass, Shut-Off Gas Valve.

Plug Valve, Size: 1/4inch, Material: Brass, Shut-Off Gas Valve.

Tee, Material: Siltek/Sulfinert-Treated, Size: 1/8inch.

Tee, Material: Siltek/Sulfinert-Treated, Size: 1/4inch.

Flexible Stainless Steel Hoses, Fittings: 1/4inch Female NPT, Length: 36inch.

Flexible Stainless Steel Hoses, Fittings: 1/4inch Female NPT, Length: 18inch.

ECD Vent Trap, Fittings: 1/8inch, Reduces the release of hazardous materials from the ECD vent into the lab. Includes connecting lines and mounting kit. 6inch x 1inch (15.2 x 2.5 cm)

Cylinder Valve Wrench, designed wrench enables easy opening of cylinder valves that are fitted with a hand wheel. It is also suitable for removing difficult cylinder caps.

Split/Splitless Injection Port, Direct Replacement or Siltek Treated, for Agilent 5890 GCs, high-quality stainless steel

Heat Sink, for Agilent 5890 GC Split/Splitless Injector.

Cross-Disk Inlet Seal, ID: 0.8 mm, Material: Siltek-Treated, for Agilent GCs, Ideal for high-flow split applications 500 mL/min on Agilent 5890 GCs. Siltek treatment provides enhanced inertness versus stainless steel. All seals include washers

PID Lamp Polishing Kit, contains iron oxide cleaning compound, swabs, and instructions.

Photoionization (PID) Lamp. Photoionization (PID) Lamp, Model 108-10.0/10.6 offers both 10.0 and 10.6 eV potential, has a 0.781inch base diameter, and is used in Tracor, OI, and Baseline instruments. Model 103 has a 1.375inch base and is used in HNU and SRI detectors.

FID/NPD Adaptor Fitting, Easy-to-use, sturdy, compact stainless steel fitting. 1/16-inch nut uses standard graphite or Vespel/graphite ferrules, Wrench pad wonGt turn when installing a capillary column. Wrench pad wonGt turn when installing a capillary column

Cross-Disk Inlet Seal, ID: 1.2 mm, Material: Gold-Plated, Ideal for high-flow split applications 500 mL/min on Agilent 5890 GCs. Siltek treatment provides enhanced inertness versus stainless steel. All seals include washers

Cross-Disk Inlet Seal, ID: 1.2 mm, Material: Gold-Plated, Ideal for high-flow split applications 500 mL/min on Agilent 5890 GCs. Siltek treatment provides enhanced inertness versus stainless steel. All seals include washers

Cross-Disk Inlet Seal, ID: 1.2 mm, Material: Siltek-Treated, Ideal for high-flow split applications 500 mL/min on Agilent 5890 GCs. Siltek treatment provides enhanced inertness versus stainless steel. All seals include washers

Replacement Transfer Line, for EZ No-Vent GC Column-Mass Spectrometer Connectors, 3FT

Micropacked Column Installation Kit, 1/16in Valco nut (1), 1/16in stainless steel nut (1), 1/16in Vespel/graphite ferrule (1), 1/16in graphite ferrule (1), stainless steel ferrule (1), 1/16in SS front ferrule (1), 1/16in stainless steel back ferrule (1)

Micropacked Column Installation Kit, 1/16in Valco nut (1), 1/16in stainless steel nut (1), 1/16in Vespel/graphite ferrule (1), 1/16in graphite ferrule (1), stainless steel ferrule (1), 1/16in SS front ferrule (2), for 1 mm ID columns; for direct injections.

Packed Column Installation Kit, Includes: 1/8inch SS nut (1), stainless steel Valco nut (1), 1/8inch Vespel/graphite ferrule (1), stainless steel Valco ferrule (1), 1/8inch SS front ferrule (1), 1/8inch SS back ferrule (1), for 2 mm ID columns; for valve applications.

FastPack Inlet Maintenance Kit, for Agilent GCs, 4 mm Splitless.

FastPack Inlet Maintenance Kit, for Agilent GCs, 4 mm Splitless Gooseneck.

FastPack Inlet Maintenance Kit, for Agilent GCs, 4 mm Split with Wool.

FID Collector Assembly Kit, w/Siltek Ignitor Castle, Constructed of high-quality stainless steel. For Agilent 5890 GCs

FID Collector Assembly Kit, w/Siltek Ignitor Castle, Constructed of high-quality stainless steel. For Agilent 6890/6850/7890 GCs

FID Collector Assembly Kit, w/Siltek Ignitor Castle, Constructed of high-quality stainless steel. For Agilent 5890/6890/6850/7890 GCs

Injector Mounting Post, for Agilent 7683 Series Autosamplers for use with 6850/6890 GCs

Injector Mounting Post, for Agilent 7673 Series Autosamplers, For Agilent 7673 Series Autosamplers for use with 6890 GCs

Septa Holder Kit, Includes septum support and holder. Made from high-quality stainless steel. Silcosteel-AC-treated version helps with septum removal. For Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL

Capillary Dedicated FID Replacement Jet, High-Performance Siltek Treated, 0.011-Inch ID Tip, for Agilent 5890/6850/6890/7890 GCs, Length: 43 mm

Packed Column Inlet Adaptor Kit, for 1/4inch Injection Ports, for 3/16inch Columns, Centers column perfectly in injection port to eliminate bent syringe needles. Slotted design prevents carrier gas occlusion. Vespel/graphite reducing ferrules make installation easy

Packed Column Inlet Adaptor Kit, for 1/4inch Injection Ports, for 1/8inch Columns, Centers column perfectly in injection port to eliminate bent syringe needles. Slotted design prevents carrier gas occlusion. Vespel/graphite reducing ferrules make installation easy

Capillary Column Nut, Material: Brass, For use with standard 1/16inch-type ferrules. For Agilent 5890/6850/6890/7890 GCs

O-Rings for APEX liners, Material: Viton, Max Temp: 250 deg C.

Injector/FID Heater and Injector/FID PRT Sensor, Heater Cartridge & Platinum Resistance Thermometer (PRT) Sensor, for Agilent 5890 GCs, Use with 5890 FID and split/splitless weldments

Heater Cartridge, and Platinum Resistance Thermometer (PRT) Sensor, for Agilent 5890 GCs, Use with 5890 FID and split/splitless weldments

Liner Cap, Gold-Plated, for Split/Splitless Injector on Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL

Split/Splitless Injection Port, EZ Twist Top, for Agilent 7890 GCs, Includes: weldment, shell weldment, weldment O-rings (2), Siltek dual Vespel ring inlet seal, septum nut, reducing nut, SS capillary nut for use with 1/16in ferrules,removal tool

Injector Adaptor, for PerkinElmer CAP Injector, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance, Siltek-treated version available for increased inertness

Injector Adaptor, for PerkinElmer CAP Injector, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance, Siltek-treated version available for increased inertness, Application: For use with PE-style capillary nuts, Material: Siltek-Treated

Z-Belt, for Agilent 7673B & 7683 Autosamplers, Meets original manufacturer's performance.

GC Column-Mass Spectrometer Connector, EZ No-Vent, Includes: connector, interface adaptor, 0.4 mm ID adaptor ferrules for capillary column (2), 0.4 mm ID ferrules for transfer line (2), 100 um deactivated transfer line (3 ft), column plug, column nut

FID Capillary Column Adaptor, Instrument: for PerkinElmer Auto SYS XL, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance, Benefits and Uses: For use with PE-style capillary nuts

FID Capillary Column Adaptor, Instrument: for PerkinElmer Auto SYS XL, Made of high-quality stainless steel, Meet or exceed original manufacturer's performance, Benefits and Uses: For use with 1/16in compression-style nuts

Injection Port Weldment, Instrument: for Agilent 6890 GCs with OI Purge and Trap Systems, Easily attach your purge and trap with pre-installed low dead volume fittings

Injection Port Weldment, Instrument: for Agilent 5890 GCs with Tekmar Purge and Trap Systems,Easily attach your purge-and-trap with pre-installed low dead volume fittings

Injection Port Weldment, Instrument: for Agilent 6890 GCs with large canister-type filter with Tekmar Purge and Trap Systems, Easily attach your purge-and-trap with pre-installed low dead volume fittings

Injection Port Weldment, Instrument: for Agilent 6890 GCs with large canister-type filter, with OI Purge and Trap Systems, Easily attach your purge and trap with pre-installed low dead volume fittings

Carriage Motor Belt, Instrument: for Agilent 7673A, 7673B, and 7673C Autosamplers, Meets original manufacturer's performance

Autosampler Plunger Carrier Belt, Instrument: for Agilent 7673A & 7673B Autosamplers, All parts meet or exceed original manufacturer's performance

Heater Cartridge & Platinum Resistance Thermometer (PRT) Sensor. Heater Cartridge & Platinum Resistance Thermometer (PRT) Sensor, Instrument: for Agilent 5890 GCs, Use with 5890 FID and split/splitless weldments, Meets or exceeds original manufacturer's performance

Oven Temperature Sensor Assembly, Instrument: for Agilent 5890 GCs.

Silver Seal 10pack. Silver Seal, Instrument: for Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL, Benefits and Uses: for Split/Splitless Injector, size: 10pack

Adaptor, for Capillary Column on Split/Splitless Injector, nstrument: for Thermo Scientific TRACE & Focus SSL, Benefits and Uses: For use with M4 ferrules, Use same installation distance as manufacturer's adaptor, Made of high-quality stainless steel

Tedlar Sampling Bag 80L. Tedlar Sampling Bag, Unique all-in-one septum and valve fitting, Polypropylene valve conveniently connects to 3/16in ID PTFE tubing, Continuous sampling temperature up to 225 deg F (107 deg C), short term (1-2 hours), Volume: 80L, Size: 28.25in x 30.5in

Replacement Orifice 0.0030in. Replacement Orifice, Non-Siltek, Flow Capacity: 15-30 mL/min, Orifice Size: 0.0030in, Material: Stainless Steel, Use these orifices with a Veriflo 423XL flow controller to change the flow range for alternative sampling times.

Replacement Orifice 0.0060in. Replacement Orifice, Non-Siltek, Flow Capacity: 30-80 mL/min, Orifice Size: 0.0060in, Material: Stainless Steel, Use these orifices with a Veriflo 423XL flow controller to change the flow range for alternative sampling times.

Category