• 0
Shop Products $

Uniliner Inlet Liner 85 mm. Uniliner Inlet Liner, Liner ID:3.5 mm, Length: 85 mm, OD: 5 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, for Agilent 1/4in Packed Injection Ports

Uniliner Inlet Liner 78.5 mm. Uniliner Inlet Liner with Hole near Top and Top Taper, Liner ID: 4.0 mm, Length: 78.5 mm, Outer Diameter: 6.3 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Laminar Cup Inlet Liner 78.5 mm. Laminar Cup Inlet Liner, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Borosilicate Glass, for Bruker/Varian GCs equipped with 1177 inlets

Straight Inlet Liner 120 mm. Straight Inlet Liner with Wool, Liner ID: 2.0 mm, Length:120 mm, OD: 2.75 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Borosilicate Glass, for Thermo TRACE GCs equipped with PTV inlets

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with CarboFrit, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Intermediate Polarity (IP), Packing: CarboFrit, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with CarboFrit, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek, Packing: CarboFrit, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Single Taper Inlet Liner 78.5 mm. Single Taper Inlet Liner, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

Straight Inlet Liner 92.1 mm. Straight Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 92.1 mm, OD: 6.2 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Borosilicate Glass, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets

Cyclo Double Taper Inlet Liner 78.5 mm. Cyclo Double Taper Inlet Liner, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Cyclo Double Taper Inlet Liner 78.5 mm. Cyclo Double Taper Inlet Liner, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Single Taper Inlet Liner 105 mm. Single Taper Inlet Liner with CarboFrit, Liner ID: 5.0 mm, Length: 105 mm, OD: 8.0 mm, Deactivation: Intermediate Polarity (IP), Packing: CarboFrit, Material: Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Recessed Single Taper Inlet Liner 78.5 mm. Recessed Single Taper Inlet Liner, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Single Taper Inlet Liner 78.5 mm. Single Taper Inlet Liner, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Bruker/Varian Gas Chromatography equipped with 1177 inlets

Top Taper Inlet Liner 54 mm. Top Taper Inlet Liner with CarboFrit, Liner ID: 3.4 mm, Length: 54 mm, OD: 5.0 mm, Deactivation: Siltek, Packing: CarboFrit, Material: Borosilicate Glass, for Bruker/Varian Gas chromatography equipped with 1078/1079 inlets

Straight Inlet Liner 93 mm. Straight Inlet Liner, Liner ID: 1.7 mm, Length: 93 mm, OD: 3.0 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent 1/4in Packed Injection Ports

Straight Inlet Liner 120 mm. Straight Inlet Liner with CarboFrit, Liner ID: 2.0 mm, Length: 120 mm, OD: 2.75 mm, Deactivation: Siltek, Packing: CarboFrit, Material: Borosilicate Glass, for Thermo TRACE GCs equipped with PTV inlets

Straight Inlet Liner 95 mm. Straight Inlet Liner, Liner ID: 3.5 mm, Length: 95 mm, OD: 5.0 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Precision Low Pressure Drop Inlet Liner 78.5 mm. Precision Low Pressure Drop Inlet Liner, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation: Siltek, Material: Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Straight Inlet Liner 93 mm. Straight Inlet Liner, Liner ID: 1.7 mm, Length: 93 mm, OD: 3.0 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass, for Agilent 1/4in Packed Injection Ports

Split Precision Liner 4mm x 6.3 x 78.5 for Agilent Gas chromatography Siltek Deactivated.

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with Wool, Liner ID: 4.0 mm, Length:78.5 mm, OD:6.3 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Borosilicate Glass, for Bruker/Varian Gas chromatography equipped with 1177 inlets

Straight Inlet Liner 1.0 mm. Straight Inlet Liner, Liner ID: 1.0 mm, Length: 86.2 mm, OD: 4.0 mm, Deactivation: Siltek, Material: Borosilicate Glass, for PerkinElmer GCs equipped with PSS Inlet

Straight Inlet Liner 78.5 mm. Straight Inlet Liner with CarboFrit, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP), Packing: CarboFrit, Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

Precision Inlet Liner 105 mm. Precision Inlet Liner with Top Taper with Wool, Liner ID: 5.0 mm, Length: 105 mm, OD: 8.0 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Single Taper Inlet Liner 78.5 mm. Single Taper Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Borosilicate Glass, for Bruker/Varian GCs equipped with 1177 inlets

Straight Inlet Liner 78.5 mm. Straight Inlet Liner, Liner ID: 5.2 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek, Material: Metal, for Agilent GCs equipped with split/splitless inlets

Single Taper Inlet Liner 78.5 mm. Single Taper Inlet Liner with CarboFrit, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Intermediate Polarity (IP), Packing: CarboFrit, Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

Precision Inlet Liner 78.5 mm. Precision Inlet Liner with Wool, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Borosilicate Glass, for Bruker/Varian Gas chromatography equipped with 1177 inlets

Double Taper Inlet Liner 78.5 mm. Double Taper Inlet Liner, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass, for Agilent Gas chromatography equipped with split/splitless inlets

Straight Inlet Liner 86.2 mm. Straight Inlet Liner with Wool, Length: 86.2 mm, OD: 4.0 mm, Deactivation: Intermediate Polarity (IP), Packing: Deactivated Wool, Material: Borosilicate Glass, for PerkinElmer Gas chromatography equipped with PSS Inlet

Cyclo Double Taper Inlet Liner (Cyclo Double Gooseneck), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 92.1 mm, OD: 6.2 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass

Frit Inlet Liner with Top Taper, Injector Liner for GCs equipped with 1078/1079 inlets, Liner Inside (ID) diameter: 3.4 mm, Length: 54 mm, Outside (OD) diameter: 5.0 mm, Deactivation: Siltek, Packing: Glass Frit, Material: Borosilicate Glass

Straight Inlet Liner (Splitless Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass, No wool

On-Column Inlet Liner, Injector Liner for GCs equipped with CIS4/PTV inlets, Liner Inside (ID) diameter: 1.7 mm, Length: 71 mm, Outside (OD) diameter: 3.0 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Cyclo Inlet Liner with carbofrit. Cyclo Inlet Liner with wool, carbofrit (Cyclosplitter Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Base Deactivated, Packing: Deactivated Wool, Material: Borosilicate Glass

Single Taper Inlet Liner with CarboFrit, Injector Liner for GCs equipped with 1177 inlets, Gooseneck splitless, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek, Packing: CarboFrit, Material: Borosilicate Glass

Straight Inlet Liner with Wool, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.5 mm, Deactivation: Siltek, Packing: Deactivated Wool, Material: Quartz

Baffled Inlet Liner, Injector Liner for GCs equipped with PTV inlets, Liner Inside (ID) diameter: 2.0 mm, Length: 120 mm, Outside (OD) diameter: 2.75 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Base-Deactivated Glass Wool 10g. Base-Deactivated Glass Wool, Fused silica wool, Ideal for amines and other basic compounds, Size: 10g

Straight Inlet Liner, Split/Splitless Liner, with CarboFrit, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 3.5 mm, Length: 95 mm, Outside (OD) diameter: 5 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Straight Inlet Liner, Split/splitless liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 2.0 mm, Length: 86.2 mm, Outside (OD) diameter: 4.0 mm, Deactivation: Siltek, Material: Borosilicate Glass

Low Pressure Drop Inlet Liner. Low Pressure Inlet Drop Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek Deactivated, Packing: Deactivated Wool, Material: Borosilicate Glass

Straight Inlet Liner (Splitless Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek Deactivated, Packing: Deactivated Wool, Material: Borosilicate Glass, reflective coating

Cup Inlet Liner (Cup Splitter Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 92.1 mm, OD: 6.2 mm, Deactivation: Siltek Deactivated, Packing: Deactivated Wool, Material: Borosilicate Glass

Cyclo Double Taper Inlet Liner (Cyclo Double Gooseneck), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 92.1 mm, OD: 6.2 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Mini-Lam Inlet Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Zero Dilution Outer Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 2.5 mm, Length: 90 mm, Outside (OD) diameter: 6.2 mm, Deactivation: Intermediate Polarity (IP), Material: Borosilicate Glass

Frit Inlet Liner with Top Taper, Injector Liner for GCs equipped with 1177 inlets, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP), Packing: Glass Frit, Material: Borosilicate Glass

Straight Inlet Liner with Glass wool. Straight Inlet Liner (Split liner), with carbofrit, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 120 mm, OD: 2.75 mm, Deactivation: Intermediate Polarity (IP) Deactivated, Material: Borosilicate Glass

Straight Inlet Liner (Splitless Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek Deactivated (reflective coating, excellent resistivity to samples), Material: Borosilicate Glass,

Straight Inlet Liner (Splitless Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.5 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass,

Drilled Uniliner Inlet Liner with Hole near Bottom, Injector Liner for GCs equipped with 1177 inlets, Liner Inside (ID) Diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) Diameter: 6.3mm, Deactivation: Intermediate Polarity(IP) deactivated, Material: Borosilicate Glass

Straight Inlet Liner with carbofrit. Straight Inlet Liner, Split/Splitless Liner, with CarboFrit, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 3.5 mm, Length: 95 mm, OD: 5 mm, Deactivation: Intermediate Polarity (IP) Deactivated, Material: Borosilicate Glass

Cyclo Single Taper Inlet Liner, Single Gooseneck, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 5.2 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3 mm, Deactivation: Siltek, Material: Metal

Straight Inlet Liner (Splitless Liner) with carbonfrit, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 2.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek Deactivated (reflective coating), Material: Borosilicate Glass,

Cup Inlet Liner with carbofrit (Cup Splitter Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Intermediate Polarity (IP) Deactivated, Material: Borosilicate Glass

Cup Inlet Liner (Cup Splitter Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3 mm, Deactivation: Base Deactivated, Material: Borosilicate Glass

Uniliner Inlet Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 1.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.3 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Straight/SPME Inlet Liner, Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 0.75 mm, Length: 78.5 mm, Outside (OD) diameter: 6.35 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Drilled Uniliner Liner. Drilled Uniliner Inlet Liner with Hole near Bottom and Top Taper, Double Gooseneck, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4 mm, Length: 78.5 mm, OD: 6.3 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Straight Inlet Liner (SPI Liner), Injector Liner for GCs equipped with split/splitless inlets, Liner Inside (ID) diameter: 0.8mm, Length: 54 mm, Outside (OD) diameter: 4.6 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Single Taper Inlet Liner with carbofrit. Single Taper Inlet Liner, Gooseneck Splitless Liner, with Carbofrit, Injector Liner for GCs equipped with split/splitless inlets, Liner ID: 4.0 mm, Length: 78.5 mm, OD: 6.5 mm, Deactivation: Siltek Deactivated, Material: Borosilicate Glass

Double Taper Inlet Liner, Injector Liner for GCs equipped with 1177 inlets, Double Gooseneck Splitless, Liner Inside (ID) diameter: 4.0 mm, Length: 78.5 mm, Outside (OD) diameter: 6.5 mm, Deactivation: Siltek, Material: Borosilicate Glass

Recessed Double Gooseneck, Liner, 4mm x 6.5 x 78.5 for Agilent GCs Siltek Deactivation.

Liner 120mm. Liner, Geometry:Straight, Liner ID: 1.0 mm, Length:120 mm, OD: 2.75 mm, Deactivation:Siltek, Material:Metal, for Thermo TRACE GCs equipped with PTV inlets

Liner 120mm. Liner, Geometry:Straight, Liner ID: 2.0 mm, Length:120 mm, OD: 2.75 mm, Deactivation:Siltek, Material:Metal, for Thermo TRACE GCs equipped with PTV inlets

Liner 78.5mm. Liner, Geometry:Precision Low Pressure Drop, ID: 2.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass, for Bruker/Varian GCs equipped with 1177 inlets

Liner 54 mm. Liner, Geometry:Top Taper, Liner ID: 3.4 mm, Length:54 mm, OD: 5.0 mm, Deactivation:Siltek, Material:Borosilicate Glass,for Bruker/Varian GCs equipped with 1078/1079 inlets

Liner 120mm. Liner,Geometry:Straight, Liner ID: 2.0 mm, Length:120 mm, OD: 2.75 mm, Deactivation:Base Deactivated, Material:Borosilicate Glass, for Thermo TRACE GCs equipped with PTV inlets

Liner 74mm. Liner, Geometry:Straight/SPME, Liner ID: 0.75 mm, Length:74 mm, OD: 6.3 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Bruker/Varian GCs equipped with 1075/1077 inlets

Liner 95mm. Liner, Geometry:Precision, Liner ID: 3.5 mm, Length:95 mm, OD: 5.0 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Laminar Cup, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Drilled Uniliner (hole near top), Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Siltek, Packing:Deactivated Wool, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Straight, ID: 2.0 mm, Length:78.5 mm, OD: 6.5 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Thermo Scientific GCs

Liner 92.1mm. Liner,Geometry:Straight, Liner ID: 1.0 mm, Length:92.1 mm, OD: 6.2 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets

Liner 54mm. Liner, Geometry:Straight, ID: 0.75 mm, Length: 54 mm, OD: 5.0 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Bruker/Varian GCs equipped with 1078/1079 inlets

Liner 85mm. Liner, Geometry:Uniliner with Top Taper / On-Column, Liner ID: 3.5 mm, Length:85 mm, OD: 5 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Agilent 1/4on Packed, Injection Ports

Liner 78.5mm. Liner, Geometry:Precision, Liner ID: 4.0 mmLent 210-4004-5; SGE 092002, Length:78.5 mm, OD: 6.3 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 86.2mm. Liner, Geometry:Straight, ID: 2.0 mm, Length: 86.2 mm, OD: 4.0 mm, Deactivation:Siltek, Packing:Deactivated Wool, Material:Borosilicate Glass, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets

Liner 78.5 mm. Liner, Geometry:Cyclo, Liner ID: 5.2 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Siltek, Material:Metal, for Agilent GCs equipped with split/splitless inlets

Liner 95mm. Liner,Geometry:Drilled Uniliner (hole near top), Liner ID: 3.5 mm, Length:95 mm, OD: 5.0 mm, Deactivation:Intermediate Polarity (IP), Material:Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

DI Glass Insert 3.0mm. DI Glass Insert, Instrument:for Agilent 5890 Packed Column GC, OD: 3.0 mm, Tolerances closely controlled, Can be removed from the septum nut weldment

Liner 78.5mm. Liner, Geometry:Straight/SPME, Liner ID: 0.75 mm, Length:78.5 mm, OD: 6.35 mm, Deactivation:Base Deactivated, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 92.1 mm. Liner, Geometry:Straight, Liner ID: 4.0 mm, Length:92.1 mm, OD: 6.2 mm, Deactivation:Siltek, Material:Borosilicate Glass, for PerkinElmer Auto SYS and Clarus GCs equipped with split/splitless inlets

Open Liner, 3mm x 5.0mm x 80mm, for ATAS GCs IP Deactivation.

Liner 71mm. Liner,Geometry:Straight, Liner ID: 2.0 mm, Length:71 mm, OD: 3.0 mm, Deactivation:Siltek, Packing:Deactivated Wool, Material:Borosilicate Glass, for Agilent GCs equipped with CIS4/PTV inlets

Cyclosplitter 4mm x 6.3 x 78.5 for Agilent GCs Base Deactivation.

Liner 78.5 mm. Liner, Geometry:Straight, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.5 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 78.5mm. Liner, Geometry:Recessed Single Taper, ID: 4.0 mm, Length:78.5 mm, OD: 6.5 mm, Deactivation:Intermediate Polarity (IP), Packing:Deactivated Wool, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 105mm. Liner, Geometry:Straight, Liner ID: 5.0 mm, Length:105 mm, OD: 8.0 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Baffle Liner, 2mm x 2.75 x 120 forThermo GCs Siltek Deactivation.

Liner 78.5mm. Liner, Geometry:Straight, Liner ID: 1.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Base Deactivated, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 95mm. Liner, Geometry:Straight, Liner ID: 3.5 mm, Length:95 mm, OD: 5.0 mm, Deactivation:Base Deactivated, Packing:Base Deactivated Wool, Material:Borosilicate Glass, for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

Open-top uniliner liner 0.32 and 0.53mmID Column ID Siltek Deactivation, with Deactivation Wool.

Cup splitter liner 4mm x 6.3 x 78.5 for Agilent GCs Siltek Deactivation, with CarboFrit.

Liner 105mm. Liner, Geometry:Straight, Liner ID: 5.0 mm, Length:105 mm, OD: 8.0 mm, Deactivation:Siltek, Packing:Deactivated Wool, Material:Metal, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Liner 78.5mm. Liner, Geometry:Straight, Liner ID: 4.0 mm, Length:78.5 mm, OD: 6.3 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Agilent GCs equipped with split/splitless inlets

Liner 120mm. Liner,Geometry:Straight, Liner ID: 2.0 mm, Length:120 mm, OD: 2.75 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Thermo TRACE GCs equipped with PTV inlets

Liner 105mm. Liner, Geometry:Straight, Liner ID: 1.0 mm, Length:105 mm, OD: 8.0 mm, Deactivation:Siltek, Material:Borosilicate Glass, for Thermo TRACE, 8000 Series and Focus GCs equipped with SSL inlets

Category