• 0
Shop Products $

Column Rt-Alumina BOND/Na2SO4 fused silica PLOT Temp. Limits:to 200 C Length:50 m Internal Diameter:0.53 mm df (um):10 um

Trap PLOT Column Particle 2.5 m, 0.53 mm ID with 2 Press-Tight Connectors Includes two Press-Tight connectors and a 2.5 m column.

Column Rtx-5MS-Low-Bleed GC-MS Temp. Limits:-60 to 330/350 C Length:60 m Internal Diameter:0.25 mm df (um):0.25 um

Column Rtx-5MS-Low-Bleed fused silica GC-MS Temp. Limits:-60 to 330/350 C Length:30 m Internal Diameter:0.25 mm df (um):0.10 um

Column Rtx-1 fused silica Temp. Limits:-60 to 270/290 C Length:15 m Internal Diameter:0.53 mm df (um):5.00 um

Column. Cloumn Rtx-DHA fused silica Temp. Limits:-60 to 300/340 C Length:150 m Internal Diameter:0.20 mm df (um):0.50 um

Column. Cloumn Rtx-DHA fused silica Temp. Limits:-60 to 300/340 C Length:100 m Internal Diameter:0.20 mm df (um):0.50 um

Column Rtx-1 fused silica Temp. Limits:-60 to 320/340 C Length:30 m Internal Diameter:0.53 mm df (um):0.10 um

Column Rxi Guard/Retention Gap Nominal ID:0.53 mm Nominal OD:0.45 +/- 0.04 mm Length:5 m.

Column Rxi Guard/Retention Gap Nominal ID:0.53 mm Nominal OD:0.45 +/- 0.04 mm Length:5 m.

Column Rxi Guard/Retention Gap Nominal ID:0.32 mm Nominal OD:0.45 +/- 0.04 mm Length:5 m.

Tee 100-3 Swagelok fitting Size:1/16in Material:Stainless steel.

Reducing Union 200-6-1 Swagelok Fitting Size:1/8in to 1/16in Material:Stainless steel.

Ball Valve Swagelok Shut-Off Gas Size:1/8in Material:Brass.

Kit Swagelok Fitting Material:Brass includes assortment of 1/8in and 1/4in brass fitting.

Cross 200-4 Swagelok fitting Size:1/8in Material:Brass.

Tee 100-3 Swagelok fitting Size:1/8in Material:Brass.

Tee 100-3 Swagelok fitting Size:1/16in Material:Brass.

Reducing Union 200-6-1 Swagelok Fitting Size:1/8in to 1/16in Material:Brass.

Union 100-6 Swagelok Fitting Size:1/8in Material:Brass.

Nut and Ferrule Set Swagelok Size:1/4in Material:Brass.

Nut and Ferrule Set Swagelok Size:1/8in Material:Brass.

Ferrule Front 403-1 Swagelok Fitting Size:1/16in Material:Brass.

Ferrule Front 103-1 Swagelok Fitting Size:1/8in Material:Brass.

Screwdriver Set Torx Set includes TR-10, TR-15, and TR-20.

Plier Set Includes 6-inch nose/side cutter, 6-inch wire cutter, and 6-inch adjusting plier.

Trap Replacement Chemical Part Split Vent for 6890/6850 Gas chromatography.

Cutter Ridgid Tubing for 1/8in or 1/4in metal tubing Replaceable cutting wheel.

Tubing. Bender Bends 1/8-inch, 3/16-inch, or 1/4-inch tubing Assists in making accurate left-hand, right-hand, or offset bends

Liner. Zero Dilution Inner 1.0 mm ID Length:73 mm OD:2.0 mm Deactivation:Intermediate Polarity (IP) Material:Borosilicate Glass

Loop. Gas Sample Sulfinert Treated Volume:5mL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:2mL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:1mL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:250 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:500 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:100 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:50 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:20 uL for 1/16in fittings, for W Type valves

Loop. Gas Sample Sulfinert Treated Volume:10 uL for 1/16in fittings, for W Type valves

Trap Replacement Chemical Part Split Vent for 6890/6850 Gas chromatography.

Merlin Microseal.

Nut Capillary for Shimadzu 17A, 2010, and 2014 Gas chromatography.

Microseal Replacement for SPME Applications (3 to 100 psi) Merlin 21-01W.

Tee Zero Dead Volume Valco Size:1/16in Material:Siltek/Sulfinert Treated.

Liner. Single Taper Inlet 4.0 mm ID Recessed with Wool Length:78.5 mm OD:6.5 mm Deactivation:Intermediate Polarity (IP) Packing:Deactivated Wool Material:Borosilicate Glass equipped with split/splitless inlets

Liner. Straight Inlet Liner 4.0 mm ID with Wool Length:78.5 mm OD:6.5 mm Deactivation:Intermediate Polarity (IP) Packing:Deact. Wool Material:Borosilicate Glass equipped with split/splitless inlets

Liner. Straight Inlet Liner 3.5 mm ID Liner ID:3.5 mm Length:95 mm OD:5.0 mm Deactivation:Intermediate Polarity (IP) Material:Borosilicate Glass for Shimadzu 17A, 2010, and 2014 GCs equipped with split/splitless inlets

O-Ring. Material:Viton Max Temp:300 C Fit split (6.3 mm OD) or splitless (6.5 mm OD) liners.

Ferrule GRAPHPACK 2M for Gerstel CIS 3 and CIS 4 PTV Inlets Fits Column ID:0.25 mm.

Ferrule GRAPHPACK 2M for Gerstel CIS 3 and CIS 4 PTV Inlets Fits Column ID:0.32 mm.

Ferrule. Standard for Micropacked Column 1/8in Fittings Material:Vespel Fitting Size:1/8in

Ferrule. Standard for Micropacked Column 1/4in Fittings Material:Vespel Fitting Size:1/4in

Ferrule. Standard for Micropacked Column 1/16in Fittings Material:Vespel Fitting Size:1/16in

Kit Make Life Easier (MLE) Capillary Tool.

Inlet and FID Maintenance kit Include the most common consumable GC supplies and tools.for 6850/6890/7890 Gas chromatography

Fitting FID/NPD Capillary Adaptor High-quality stainless steel construction.

O-Ring. Replacement Chemical Traps and Parts Built-in frits retain fine particles; adsorbents remove both moisture and hydrocarbons.for Trap Fittings

Cartridge. Super Clean Gas Trapping System for LC-MS includes 2-position base plate, 2 charcoal filters)

Trap. Hydrocarbon S-Trap Fittings:1/8in Brass Reduces organics to 0.1 ppm (assuming 100 ppm input). Fits in GC oven for easy thermal recharging. Maximum operating pressure: 60 psi (414 kPa).

Bag. Tedlar Sampling Bag Modification:Polypropylene Valve and Septum Fitting Volume:1 L Size:7in x 7in for Polypropylene or stainless steel valve. Both valves conveniently connect to 3/16in ID PTFE tubing.

Trap. Indicating Oxygen Fittings:1/4in Brass Heavy-walled glass body, protected by polycarbonate sleeve, prevents oxygen and water infusion. Prepurged for fast stabilization. 100 psi (689 kPa) maximum operating pressure. Reduces oxygen to 0.1 ppm. 10 um frits at inlet and outlet.

Trap. Indicating Oxygen Fittings:1/8in Brass Heavy-walled glass body, protected by polycarbonate sleeve, prevents oxygen and water infusion. Prepurged for fast stabilization. 100 psi (689 kPa) maximum operating pressure. Reduces oxygen to 0.1 ppm. 10 um frits at inlet and outlet.

Trap. High-Capacity Moisture trap Fittings:1/8in Nickel-Plated Brass Purged with ultra-high-purity helium; ready to use. Maximum operating pressure: 250 psi (1,724 kPa). Maximum flow: 1.25 L/min.

Nut and Ferrule Set Size:1/16in Material:Stainless Steel Parker fitting.

Liner. Single Taper Inlet 4.0 mm ID Varian 392611927 Length:78.5 mm OD:6.5 mm Deactivation:Intermediate Polarity (IP) Material:Borosilicate Glass

Gauge. Capillary Installation for 5973/5975 MS Made from high-quality stainless steel.Seats ferrules onto column for consistent installations.

Liner. Double Taper Inlet Liner ID:4.0 mm Varian 392611929 Length:78.5 mm OD:6.5 mm Deactivation:Intermediate Polarity (IP) Material:Borosilicate Glass

Septa. Material : Red PTFE/White Silicone Size:8 mm x 0.065in for 8mm Screw-Thread Vial

Seal. With Septa Type:Crimp-Top Color:Silver Material:Aluminum Septa/Liner Material:PTFE/Silicone 20 mm, preassembled

Seal. With Septa Type:Crimp-Top Color:Silver Material:Aluminum Septa/Liner Material:PTFE/ Butyl 20 mm, preassembled

Seal. With Septa Type:Crimp-Top Color:Silver Material:Aluminum Septa/Liner Material:PTFE/Gray Butyl Rubber 20 mm, preassembled

Seal. With Septa Type:Crimp-Top Color:Silver Material:Aluminum Septa/Liner Material:PTFE/Silicone 20 mm, preassembled

Septa, 0.040in Size:13 mm x 0.040in Material:Red PTFE/Silicone/PTFE.

Septa, 0.060in Size:13 mm x 0.060in Material:Red PTFE/Silicone.

Cap WISP 48 Type:Screw-Thread Modification:Open-Hole Color:Black Material:Polypropylene 4.0 mL WISP 48 Caps and Septa

Ring. Snap Ring Cap with Septum Type:Snap-Top Color:Clear Material:Polypropylene Septa/Liner Material:PTFE/Butyl Rubber 2.0 mL, 11 mm

Ring. Snap Ring Cap with Septum Type:Snap-Top Color:Clear Material:Polypropylene Septa/Liner Material:PTFE/Butyl Rubber 2.0 mL, 11 mm

Ring. Snap Ring Cap with Septum Type:Snap-Top Color:Clear Material:Polypropylene Septa/Liner Material:PTFE/Butyl Rubber 2.0 mL, 11 mm

Washer Replacement Inlet Seal.

Liner. Baffled Inlet Liner 1.5 mm ID Geometry:Baffled Length:71 mm OD:3.0 mm Deactivation:Intermediate Polarity (IP) Material:Borosilicate Glass

FID Collector Assembly includes insulator for 6890/6850/7890 GCs Constructed of high-quality stainless steel.

Jet Packed Column FID Replacement High-Performance Siltek Treated, 0.018-Inch ID Tip.

Tubing. Rinsed and Cleaned 304 Stainless Steel Tubing Material:Instrument-Grade 304 Grade Stainless Steel ID:0.01in OD:1/16in

O-Ring for Auto SYS XL or Clarus GCs with PSS Injector Material:Graphite Max Temp: 450 C.

Seal Silver PTV for 6890 Gas chromatography.

Seal Inlet Liner Instrument for TRACE PTV Max Temp:450 C.

Plunger Replacement Assembly, PTFE-Tipped Volume:10 uL for Fixed Needle Syringe.

Crimp Vial Convenience kit. Crimp Vial Convenience Kit 2.0 mL Includes: amber 2.0 mL Vial, Untreated, Silver Seal, PTFE/Natural Rubber Septa.clear-lid tray. Caps with septa packaged in a plastic bag

Crimp Vial Convenience kit. Crimp Vial Convenience Kit 2.0 mL Includes: Clear 2.0 mL Vial, Untreated, Silver Seal, PTFE/Natural Rubber Septa.clear-lid tray. Caps with septa packaged in a plastic bag

Cap Material:Polypropylene Modification:Open-Hole Type:Screw-Thread Color:Black Cap size:8 mm/425 for 2.0 mL, 8 mm Screw-Thread Vials

Vial. Headspace Crimp Vial Rounded Bottom Type:Crimp-Top Volume:10 mL Color:Clear Vial Size:23 x 46 mm Cap Size:20 mm

Seal 2.0 mL, 11 mm Aluminum Crimp Seals With Septa Type:Crimp-Top Color:Silver Material:Aluminum Septa/Liner Material:PTFE/Natural Rubber

Vial. Modification: Rounded Bottom, Type: Crimp-Top, Volume: 20 mL, Color: Clear, Vial Size: 23 x 75mm, Cap Size: 20mm

Liner. Straight Inlet, with wool, 2.0mm ID, Length: 71mm, OD: 3.0mm, Material: Borosilicate Glass, for GCs equipped with CIS4/PTV inlets

Vial. Modification: without Graduated Marking Spot, Volume: 2.0 mL, Color: Clear, Vial Size: 12 x 32mm, Cap Size: 9mm, Fit all 2.0 mL, 12 x 32mm, crimp-top vial- based autosamplers.

Vial. Modification: without Graduated Marking Spot, Volume: 2.0 mL, Color: Clear, Material: Glass, Vial Size: 12 x 32mm, Cap Size: 9mm

Vial. Modification: without Graduated Marking Spot, Volume: 2.0 mL, Color: Clear, Material: Glass, Vial Size: 12 x 32mm, Cap Size: 11mm

Cap/Septa. Preassembled, Fit all 2.0 mL, 12 x 32mm, screw-thread 8mm/425 vial-based autosamplers, Septa/Liner Material: Red PTFE/Silicone, 0.065inch

Vial. Short-Cap, Screw-Thread, Volume: 2.0 mL, Color: Clear, Vial Size: 12 x 32mm, Cap Size: 9mm, with White Graduated Marking Spot

FID Ignitor Castle, Replacement Parts for FID Collector Assembly Kit.

Category