• 0
Shop Products $

Encapsulated Ferrules for 1/16-Inch Compression Fittings, Restek. Encapsulated Ferrules for ¹/16 IN. Compression Fittings, Restek - 21036, Encapsulated Ferrules

Frit Inlet Liner with Top Taper for Bruker/Varian GCs Equipped with 1177 Inlets, Restek - 21046-214, Split with Glass Frit

Drilled Uniliner® Inlet Liner with Hole near Top for Agilent GCs Equipped with Split/Splitless Inlets, Restek - 21055-214, Drilled Uniliner

Drilled Uniliner® Inlet Liner with Hole near Top for Agilent GCs Equipped with Split/Splitless Inlets, Restek - 21055, Drilled Uniliner

Vu2 Union® Connectors, Restek - 21105, Vu2 Union Connector Kit

Replacement Parts for FID Collector Assembly Kit for Agilent GCs, Restek - 21138, FID Collector (includes insulators)

Replacement Parts for FID Collector Assembly Kit for Agilent GCs, Restek - 21139, FID Collector (includes insulators)

9 mm Short-Cap, Screw-Thread Vials, Restek - 21141, 2 ml, Short-Cap Vial w/White Graduated Marking Spot

9 mm Short-Cap, Screw-Thread Vials, Restek - 21142, 2 ml, Short-Cap Vial w/White Graduated Marking Spot

9 mm Short-Cap, Screw-Thread Vials, Restek - 21143, 2 ml, Short-Cap Vial w/White Graduated Marking Spot

5ml Fritted Sparger, 1/2-inch mount. Fox Tekmar 2000,3000 and ALS 2016/2032. Available in 5 and 25ml. sizes. Uniform frits to ensure maximum purge efficiency. These spargers are not recommended for wastewater samples since the frit may become plugged.

25ml Fritted Sparger, 1/2-inch mount:. Fox Tekmar 2000,3000 and ALS 2016/2032. Available in 5 and 25ml. sizes. Uniform frits to ensure maximum purge efficiency. These spargers are not recommended for wastewater samples since the frit may become plugged.

11 mm Crimp-Top Vials, Restek - 21153, 2 ml, Vial without graduated marking spot

Aluminum Crimp Seals with Septa, 11 mm, Restek - 21175, Seals w/Septa

Septa for 8mm Screw-Thread Vials, Restek - 21178, 8 mm x 0.060 IN.. 8 mm × 0.060 IN., Septa

8 mm Autosampler Vial Convenience Kits, Restek - 21192, 2 ml, Autosampler Vial Convenience Kit, Untreated

8 mm Autosampler Vial Convenience Kits, Restek - 21194, 2 ml, Autosampler Vial Convenience Kit, Untreated

11 mm Crimp Vial Convenience Kits with Vials, Caps, and Septa, Restek - 21199, 2 ml, Crimp Vial Convenience Kit, Untreated

Stainless Steel Inlet Seal. Stainless Steel Dual Vespel Ring Inlet Seal, 0.8mm ID, 2pk

Stainless Steel Inlet Seal. Stainless Steel Dual Vespel Ring Inlet Seal, 0.8mm ID, 10pk

Dual Vespel® Ring Inlet Seals for Agilent GCs, Restek - 21240, Dual Vespel Ring Inlet Seal

Dual Vespel® Ring Inlet Seals for Agilent GCs, Restek - 21241, Dual Vespel Ring Inlet Seal

Siltek Inlet Seal. Siltek Dual Vespel Ring Inlet Seal, 0.8mm ID, 2pk

Dual Vespel® Ring Inlet Seals for Agilent GCs, Restek - 21243, Dual Vespel Ring Inlet Seal

Stainless Steal Inlet Seal. Stainless Steel Dual Vespel Ring Inlet Seal, 1.2mm ID, 10pk

Gold Plated Inlet Seal. Gold Plated Dual Vespel Ring Inlet Seal, 1.2mm ID, 2pk

Gold Plated Inlet Seal. Gold Plated Dual Vespel Ring Inlet Seal, 1.2mm ID, 10pk

Siltek Inlet Seal. Siltek Dual Vespel Ring Inlet Seal, 1.2mm ID, 10pk

Siltek Inlet Seal. Siltek Dual Vespel Ring Inlet Seal, 1.2mm ID, 10pk

Make-Up Gas Fitting. ECD/FID dual-purpose replacement fitting for Agilent 5890 6C. Consists of 6.4mm nut with graphite ferrule, and a 1.6mm nut with a 0.4mm I.D. graphite capillary ferrule.

ECD/FID Dual-Purpose Make-Up Gas Kit.

Direct Injection (DI) Inserts and Sleeve adapter for 1/4 Inch Packed Column Injection Ports. Uses standard 1/16-inch capillary nut and ferrules. Convenient wrench pad at base. Includes 1/4-inch graphite ferrule and stainless steel nut.

Gold-Plated Inlet Seal. 1.2mm ID. 0.25/0.32mm ID Dual-Column Installation. Special grade of stainless steel that is softer and deforms more easily, ensuring a completely leak-free seal. Increases column lifetime because oxygen cannot permeate into the carrier gas.

Gold-Plated Inlet Seals. For Agilent 5890/6890 split/splitless injection ports. 1.2mm. Increased inertness over stainless steel and reduced breakdown and adsorption of active compounds. Column lifetime is increased because oxygen cannot permeate into the carrier gas. 10/pk.

Silcosteel Treated Inlet Seal. 1.2mm ID. 0.25/0.32mm ID Dual-Column Installation. Special grade of stainless steel that is softer and deforms more easily, ensuring a completely leak-free seal. Increases column lifetime because oxygen cannot permeate into the carrier gas.

Silcosteel Treated Inlet Seal. 1.2mm ID. 0.25/0.32mm ID Dual-Column Installation. Special grade of stainless steel that is softer and deforms more easily, ensuring a completely leak-free seal. Increases column lifetime because oxygen cannot permeate into the carrier gas.

Septum Nut. (similar to HP part # 18740-60835, except with a 26-gauge hole.): For 26-Gauge Needles.

(inlet) Finger-Tight Nut. (for use with short HP-type ferrules). Rapidly tighten columns without wrenches. Avoid overtihtened stripped threads. Two versions available. Both versions can be used with 0.25, 0.32, or 0.53mm ID Columns. Wrench pad for VESPEL /graphite ferrules.

(inlet) Finger-Tight Nut. (for use with standard ferrules). Rapidly tighten columns without wrenches. Avoid overtightened stripped threads. Two versions available. Both versions can be used with 0.25, 0.32, or 0.53mm ID Columns. Wrench pad for VESPEL /graphite ferrules.

Replacement Ring Seal for MSD Conversion Fitting, Restek - 21313, Replacement Ring Seal for MSD Conversion Fitting

MSD Conversion Fitting, Restek - 21314, MSD Conversion Fitting

Replacement Inlet Seals for Agilent GCs, Restek - 21315, Replacement Inlet Seal

Replacement Inlet Seals for Agilent GCs, Restek - 21316, Replacement Inlet Seal

Gold-Plated Inlet Seals. For Agilent 5890/6890 split/splitless injection ports. 0.8mm. Increased inertness over stainless steel and reduced breakdown and adsorption of active compounds. Column lifetime increased because oxygen cannot permeate into the carrier gas. 2/pk.

Gold-Plated Inlet Seals. For Agilent 5890/6890 split/splitless injection ports. 0.8mm. Increased inertness over stainless steel and reduced breakdown and adsorption of active compounds. Column lifetime is increased because oxygen cannot permeate into the carrier gas. 10/pk.

Silcosteel Treated Inlet Seal. 0.8mm ID. Single-Column Installation. Special grade of stainless steel that is softer and deforms more easily, ensuring a completely leak-free seal. Increases column lifetime because oxygen cannot permeate into the carrier gas.

Silcosteel-treated Inlet Seals. For Agilent 5890/6890 split/splitless injection ports. 0.8mm Inertness similar to that of a fused silica capillary column. Offers reduced breakdown and adsorption of active compounds and increased column lifetime. 10/pk.

EZ No-Vent® GC Column-Mass Spectrometer Connector for Agilent GCs, Restek - 21323, EZ No-Vent Connector Kit

GC Installation Kit. Contains the tubing and fittings needed to add an additional GC to your lab bench. Also included are four 1/8-inch tees, so carrier, fuel, and other GC gases can be routed to the new inlet or detector from existing gas lines.

Rinsed and Cleaned 304 Stainless Steel Tubing, Restek - 21506, Tubing, Welded/Drawn

Rinsed and Cleaned 304 Stainless Steel Tubing, Restek - 21512, Tubing, Welded/Drawn

Replacement Chemical Trap for HP 5890 GCs. (similar to HP part # 05890-61260.).

CarboFrit Puller/Inserter Tool. Highly inert. Extends analytical column lifetime. Enhances split and splitless injection reproducibility. Improve retention of high molecular weight contaminants. Uniform pore size guarantees consistent flow through the liner. Consistent packing density.

Ultra-High Purity Chrome-Plated Brass Line Gas Regulator, Restek - 21666, Ultra-High-Purity Line Gas Regulator

Dual-Stage Ultra-High Purity Chrome-Plated Brass Gas Regulators with CGA Fittings, Restek - 21667, Ultra-High-Purity Regulator

Dual-Stage Ultra-High Purity Chrome-Plated Brass Gas Regulators with CGA Fittings, Restek - 21668, Ultra-High-Purity Regulator

Dual-Stage Ultra-High Purity Chrome-Plated Brass Gas Regulators with CGA Fittings, Restek - 21669, Ultra-High-Purity Regulator

Capillary Dedicated FID Replacement Jet for Agilent 5890/6850/6890/7890 GCs, Restek - 21683, High-Performance Siltek Treated, 0.011 IN. ID Tip

Viton Replacement O-rings. similar to HP part # 19243-80570.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.030-Inch ID. (Similar to HP part #18789-80070.). High-Performance. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.030-Inch ID. (Similar to HP part #18789-80070.). High-Performance. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.030-Inch ID. (Similar to HP part #18789-80070.). Standard. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.030-Inch ID. (Similar to HP part #18789-80070.). Standard. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Purge Port Weldment. Similar to HP part # 19243-80570.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.018-Inch ID. (Similar to HP part #18710-20119.). Standard. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.018-Inch ID. (Similar to HP part #18710-20119.). Standard. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Packed Column Replacement Jets For HP 5890/6890 GCs, 0.018-Inch ID. (Similar to HP part #18710-20119.). High-Performance. 0.018-inch ID jets: Used for most general-purpose packed column applications.

Split/Splitless SilcoSleeve w/Wool. 5.2mm ID. 6.3mm OD. 78.5mm Length. Won't crack, chip or break like glass liners. Equivalent inertness to glass liners. Excellent response for pesticides, phenols, and other active compounds. Inexpensive and cost-effective.

1078/1079 Split Liner. 3.4 mm ID. 5.0 mm OD. 54 mm Length. Similar to Varian Part Number: 03-918464-00.

WISP 48 Caps and Septa, Restek - 21743, WISP 48 Caps and Septa, Preassembled

Aluminum Seals with Septa, 20 mm, preassembled, Restek - 21762, Seals w/Septa

Aluminum Seals with Septa, 20 mm, preassembled, Restek - 21764, Seals w/Septa

Inserts for 2.0 ml, 8 mm Screw-Thread Vials, Restek - 21775, 100 µl, Insert with PP bottom spring

Inserts for 2.0 ml, 11 mm Crimp-Top and 2.0 ml, 9 mm Short-Cap, Screw-Thread Vials, Restek - 21776, 250 µl, Big mouth insert with bottom spring, for use with 9 mm, 10 mm (425) and 11 mm vials

Inserts for 2.0 ml, 11 mm Crimp-Top and 2.0 ml, 9 mm Short-Cap, Screw-Thread Vials, Restek - 21779, 250 µl, Big mouth insert with glass flange (step design), for use with 10 mm (425) and 11 mm vials

Nut & Ferrule Set. 1/8in. Brass. Includes self-sealing shut off valve. Please call for multiple copies.

Nut & Ferrule Set. 1/4in. Brass. Includes self-sealing shut off valve. Please call for multiple copies.

Plug. 1/8in. Brass. Similar to Parker: 2 BLP 2. Similar to Swagelok: 200-P. Includes self-sealing shut off valve. Please call for multiple copies.

Union. 1/8 to 1/8in. Brass. Similar to Parker: 2 SC 2. Similar to Swagelok: 200-6. Includes self-sealing shut off valve. Please call for multiple copies.

Reducing Union. 1/4 to 1/8in. Brass. Similar to Parker: 4 RU 2. Similar to Swagelok: 400-6-2. Includes self-sealing shut off valve. Please call for multiple copies.

Tee. 1/8in. Brass. Similar to Parker: 2 ET 2. Similar to Swagelok : 200-3. Includes self-sealing shut off valve. Please call for multiple copies.

Male Connector. 1/4 to 1/4 NPT in. Brass. Similar to Parker: 4 MSC 4N. Similar to Swagelok : 400-1-4. Includes self-sealing shut off valve. Please call for multiple copies.

Injector/Detector Plug Nuts, Restek - 21883, Injector/Detector Plug Nuts

Capillary Column Nuts for Agilent 5890/6850/6890/7890 GCs, Restek - 21884, Capillary Column Nut

Inlet Fittings for Shimadzu GCs, Injector Nut Kit for Shimadzu 17A GCs. includes a 17A injector nut. Includes a 0.4mm graphite ferrule. Includes a 1/16-inch stainless steel capillary nut.

Graphite Sealing Ring for Thermo Scientific TRACE, 8000, 8000 TOP & Focus SSL instruments; fits 8 mm OD liners, Restek - 21899, Graphite Sealing Ring

Nut. 1/16in. Stainless Steel. Similar to Parker: 1 NU 1. Similar to Swagelok : 102-1. Includes self-sealing shut off valve. Please call for multiple copies.

Male Connector. 1/4 to 1/4 NPT in. Stainless Steel. Similar to Parker: 4 MSC 4N. Similar to Swagelok : 400-1-4. Includes self-sealing shut off valve. Please call for multiple copies.

Replacement Gas Filters for Restek Super Clean® Gas Filter Kits, Restek - 21982, Replacement Helium-Specific Gas Filter (removes oxygen, moisture, and hydrocarbons)

Wall Mounting Bracket, Restek - 21984, Wall Mounting Bracket for Super Clean Base Plates

Capillary-Grade Hydrocarbon Trap, Restek - 21991, Capillary-Grade Hydrocarbon Trap

Capillary-Grade Hydrocarbon Trap, Restek - 21992, Capillary-Grade Hydrocarbon Trap

Parker HydroGen Mateâ„¢ DI Water System, Restek - 22000, HydroGen Mate DI Water System-Model 72-230

Accessories for Parker HydroGen Mateâ„¢ DI Water System, Restek - 22001, Maintenance Kit for Parker HydroGen Mate DI Water System

Catalyst Replacement Tower for Model 76-810, 3500cc/min. Turn in-house compressed air supply into ultra-pure air (0.1ppm total hydrocarbons.). Removes Hydrocarbons by catalytic oxidation to less than 0.1ppm. Operators at 40 to 125psi.

Catalyst Replacement Tower for Model 76-811 18, 000cc/min. Turn in-house compressed air supply into ultra-pure air (0.1ppm total hydrocarbons.). Removes Hydrocarbons by catalytic oxidation to less than 0.1ppm. Operators at 40 to 125psi.

Catalyst Replacement Tower for Model 76-821 30, 000cc/min. Turn in-house compressed air supply into ultra-pure air (0.1ppm total hydrocarbons.). Removes Hydrocarbons by catalytic oxidation to less than 0.1ppm. Operators at 40 to 125psi.

Refillable Hydrocarbon Trap, Restek - 22012, Refillable Hydrocarbon Trap

Refillable Hydrocarbon Trap, Restek - 22013, Refillable Hydrocarbon Trap

Indicating Moisture Trap, Restek - 22014, Indicating Moisture Trap

Category