• 0
Shop Products $

Cyclonic Spray Chamber and Adapter Kit. The cyclonic spray chamber is an integral part of the sample introduction system responsible for filtering the sample mist to permit the appropriate droplet size distribution to reach the plasma. The cyclonic spray chamber relies on momentum to efficient.

Pump Head with Stainless Steel Rollers for the Optima 2000/4000 Family.

Burner Head. Three Slot Burner Heads for AAnalyst Series Spectrometers, Slot Length: 10cm, Flame Type: Air-Acetylene. Burner chambers constructed of, Or coated with, Inert, Wettable plastic to allow for proper drainage of sample and to prevent burner of previous analysis.

Air Filter Assembly. Balston Air Filter Assembly Type A82. Provides clean air for AA spectrometers without microcomputer gas controls, For 3100 spectrometer

Single Slot Burner Heads for AAnalyst Series Spectrometers, Slot Length: 5cm, Flame Type: Air-Acetylene. Burner chambers constructed of, Or coated with, Inert, Wettable plastic to allow for proper drainage of sample and to prevent burner of previous analysis.

Capillary Assembly for High Sensitivity GemTip Nebulizer for AAnalyst 100 Spectrometer.

GemTip Assembly. Universal GemTip Assembly Complete for GemTip Nebulizer for PerkinElmer AAnalyst 100, 300, 700, And 800

Capillary Assembly for Universal GemTip Nebulizers for AAnalyst 100 Spectrometer.

Standard Transfer Line-HS. For operation up to 210DegreeC.

End Cap Assembly for High Sensitivity Nebulizer (P/N B0505480 and P/N B0505590).

Research Peltier Accessory. Research Peltier Accessories : PTP-1, PTP-1+1, PTP-6 and PTP-6+6 accessories. Each accessory includes full temperature-ramp programming capability via the simple touchpad and integral cuvette stirring

TurboMatrix Headspace PPC Add-on Kit. Includes parts to convert a headspace sampler from manual pneumatics to electronic Programmable Pneumatic Control (PPC).

Vial Shaker Add-on Kit. To Add a Frequency Scanning Shaker to a TurboMatrix 40 or TurboMatrix 110 headspace sampler.

On-line Sampling Add-on Kit. Adds capability to perform on-line sampling of ambient air directly to the electrically cooled trap. Overlapping sampling and GC analysis allows collection of air for analysis up to 50 minutes of every hour.

Mono-Fiber Transfer-Optic - L650/850/950. Fiber optic transfer holder for LAMBDA spectrophotometers. Requires pair of Mono-Fibers 2x2 or 2x10 meters and/or optrode.

Battery. Rechargeable Battery for STS 25, 12V, Waterproof, Suitable for outdoor use, For STS25 Sequential tube Sampler

Adapter. Electrical Adapter for STS 25. Allows for direct connection to wall outlet. Also acts as a battery charger for 12V battery (120 V/240 V), For STS25 Sequential tube Sampler

Small Spot Kit for the 150mm integrating sphere. Lens kit for reducing beam size to the transmittance, To the center mount and to the diffuse reflectance position.

Excitation/emission polarization accessory. Consists of two filter wheels, Software-controlled,independently set or automatically calculated for polarization, Anisotropy or G-factor.

Total emission accessory. More efficient fluorescence collection, For bio and chemiluminescence measurements, Five computer-controlled emission cut-off filters are supplied with the Model LS-55/50B Spectrometer.

Sipper Cell and Pump accessory, 16 microliter illuminated volume flowcell and a peristaltic pump controlled by the LS 55/50B Series software. Rapidly and easily transferred from a wide variety of containers to the flowcell for measurement.

Low-temperature Luminescence accessory. Fused silica tubes (2 mm x 4 mm x 75 mm), Easily replaces the standard sample compartment for the analysis of samples at the temperature of liquid nitrogen, Cools more efficiently.

Flowcell accessory. LC Flowcell accessory, Detect trace components eluted from liquid chromatographs 1.3 mm square section, Synthetic, Fused silica flowcell, 16 mL volume (P/N L2251247), 0.4 mm FEP Inlet Tube (P/N L2151202), 0.7 mm FEP Outlet Tube (P/N L2151203)

Holder. Single position thermostatted cell holder with magnetic stirrer for a 10 mm pathlength cell, Water thermostatted. Includes six stirrer fleas, P/N 04978499.

Remote Fiber Optic Accessory. The Remote Fiber Optic Accessory allows to take the measurement to the sample rather than taking the sample to the instrument. It is ideal for remote, Non-destructive testing of fluorescent papers and fabrics, And remote sampling of hazardous materials.

Biokinetic Accessory. Magnetically stirred single cell holder; water thermostatted. Includes a built-in temperature sensor (range 0DegC to 100DegC) and an event marker. Thermostattable by means of an external water bath (not included). Accommodates 10 mm pathlength cuvettes.

Fast Filter Wheel Accessory Drive Unit. It Includes, A Fast Filter Accessory Board, Software (P/N L2250019) and filter set.

BCECF excitation filter set, 495/440 nm. If using FURA 2 and BCECF, Which are both excitation dyes, One drive unit (P/N L2250146) is required to fit on both pairs of filters. Both dyes can be monitored in the same experiment.

Conikal U-Series, Nebulizer 2 mL/min Gas Flow (1 L/min), Sample Uptake (2 mL/min).

Rack. Autosampler sample rack, 15 ml vials (oils), 80 position (metal), Metal rack for 15ml vials and used in oils systems.

Powder Holder kit for motorized stage. For automated analysis of powders. Kit includes: powder holder baseplate, Powder cup loading base and tray, Powder holder cups (24), 10 cm micro spatula, Brush and tweezers. Compatible with standard and Multiwell motorized stages.

Infrared polarizer kit. Used to study orientation effects of single crystals, Polymers and other large molecules.

Rotatable cell holder.

FURA 2 excitation filter set, 340/330 nm or 340/365 nm. One drive unit (P/N L2250146) is required to fit on both pairs of filters . Both dyes can be monitored in the same experiment.

Spectrum One 0.25mm M/B MCT kit. Spectrum One 0.25mm M/B MCT Kit. M/B MCT Detector Kit for Spectrum One Includes medium band (cut-off 550 cm-1) Mct detector with 0.25 mm detector area and MCT pre-amp.

Tablet Holder kit for motorized stage. For automated analysis of tablets.includes: tablet holder baseplate, 11mm tablet holder cup(24), 15mm tablet holder cup(12), 22mm tablet holder cup(6) and three packs of 100 disposable circular tablet mounts at three different sizes

VT cell jacket spare kbr windows (pair).

VTC sealed liquid cell (KBr 0.5mm PL).

VTC sealed liquid cell (KBr 1.0mm PL).

Microscope objective lens, 5x.

Autosampler Test Tube Racks 16 x 6. Allows interchangeable sampling between test-tube vials and 4 oz bottles.

Powder Press (HATR).

Laser Power Supply. Replacement Laser Power Supply User installable spare for Spectrum One systems.

Disposable snap-cells. assembled, package. 5. Fully assembled for the convenient analysis of liquid samples. Includes cell holder, Snap-cells, glass cell windows, and a 1 mL pipette for sample introduction. Pathlength ca 0.5 mm.

C5 gas cell 1-8m VPL glass CaF2.

C5 gas cell 1-8m VPL metal CaF2.

DC-2 diasqueeze diamond compression cell.

Microfocus beam condener - KRS-5 lenses.

Regulator. High-Purity Brass Regulator (Single Stage), CGA-350, Use:H2 and Ar/CH4 mixes. Delivery Pressure

Regulator. High-Purity Brass Regulator (Single Stage), CGA-350, Use:Helium, Delivery Pressure

Nitrous oxide hose assembly, Blue, 3.7 meters (12ft) long. for connecting Fuel, Air and Nitrous Oxide from supply to instrument.

Quartz Injector, Ball Joint, 0.85 mm inner diameter . For volatile organics on DRCs.

Waste trap and drain assembly.

Acetylene Hose Assembly, Red Neoprene, 3.7 meters (12ft) long. for connecting Fuel, Air and Nitrous Oxide from supply to instrument.

Hose assembly-nitrous oxide.

Air/Argon hose assembly, Black, 3.7 meters (12ft) long. For connecting Fuel, Air and Nitrous Oxide from supply to instrument.

Stainless steel nebulizer, End cap assembly.

Replacement crimper head, Crimper Press P/N 02190048.

Thermolite, 100 g, use only the highest grade of reagents. Raw un-conjugated material.

Column bypass coil.

Capillary assembly for Platinum alloy nebulizers. Stainless Steel body, Etched with a inchPinch for identification.

Intracooler Bolt kit. Intracooler Bolt Kit for the Pyris 1 DSC and DSC 7. Includes: Intracooler Bolt Insulating Disk (P/N 03191720), Split Bushing (P/N 03191719), and Bolt (P/N 03191527).

Small quartz dilatometer kit. Permits the determination of volumetric changes of materials, Used for determination of shrinkage from a mold. 0.1ml capacity to be used with the 15mM diameter furnace. Includes: Small Quartz Dilatometer Cell, Aluminum Oxide Powder 28 g

Flow cell accessory for S-200 RI detector.

Regulator. Air/Argon/Nitrogen Regulator. Regulator to cylinder CGA number 590. Includes hose assembly. Maximum Inlet Pressure: 3000 psig.

Regulator. Argon/Nitrogen Regulator.Can be used with Argon or Nitrogen and has a CGA 580 fitting. A color-coded hose with 1/4-inch SWAGELOK fittings is also included. Max Inlet Pressure: 3000 psig.

Capillary assembly,for stainless steel body Nebulizers.

Nebulizer. Corrosion-resistant nebulizer, for models analyst 100/300/700/800,5100(PC),5000,3300,3110,3100 and earlier Aas.

Detector receiver, 1/8inch.

Liquid nitrogen cold finger threaded solid aluminum cylinder. For use with ice water bath or Liquid nitrogen.

Agate pestle and mortar.

Filter element. replacement filter element for the pre-final filter for the shear gas. for the shear gas replacement for air dryer filter.

Regulator. high-purity brass regulator (dual stage), CGA-350, use: helium and argon/ch4 mixes. offers both single- and dual-stage regulator.

Wrench for the PerkinElmer 2400 Reduction Tube, 11 mm.

Sealing insert for large volume stainless steel pans (p/n 03190218).

Polarizer Drive. Double Polarizer Drive for PerkinElmer Lambda 800/900 Spectrometer, for installation in the sample compartment, fully automated,

Force calibration weight, 50 g.

Low temperature sample tubes. Pack of five.

Quartz Control Plate, Thermostattable housing, nominal rotation -1 degree at 589 nm (NaD).

Quartz Control Plate, Thermostattable housing, nominal rotation +1 degree at 589 nm (NaD).

Autosampler Crimper Accessory kit. Autosampler Crimper Accessory Kit.Includes standard Sample Pan Manipulator and inserts to seal 10 uL, 30 uL, and 50 uL.

Sealing insert for volatile sample pans (p/n 02190062, p/n 02190080 and p/n n5190788).

tubing for peristaltic pump (purple/purple). tubing for peristaltic pump (purple/purple) for perkinelmer lambda 800/900 and perkinelmer 10/20/40 spectrometers, inner diameter: 2.06mm, thickness: 0.80mm.

Set of Monofibers UV/VIS (250 to 900nm) for Lambda 10/20/40 and Lambda 800/900 Spectrometers, Length: 2m, Width: 2m, 600 micron diameter, standard SMA adapters included.

Liquid Sampling Capsule Sealing Unit Magazine Kit. Liquid sampling capsule sealing unit magazine kit, for use with volatile, non-viscous, non-corrosive samples, Includes: one capsule sealing unit one magazine for 4 ul and 30 ul capsules one instruction manual.

Varian Capillary Column Interface kit. Varian Capillary Column Interface Kit, For connection to a Varian 3400 or 3800 gas chromatograph capillary column injector

Depolarizer Crystal. Depolarizer crystal for perkinelmer lambda 800/900 double polarizer cassette. high performance depolarizer crystal for measurements in depolarized light in the sample compartment.

Varian interface kit. For connection to a Varian 3400 or 3800 gas chromatograph packed column injector.

Quartz Glass Optical Cell 2.

Peristaltic Pump Tubing White/white. peristaltic pump tubing resistant to organic solvents for AA, ICP-OES, ICP-MS and FIAS-200. Peristaltic pump tubing resistant to organic solvents for AA, ICP-OES, ICP-MS and FIAS-200, Thickness: 0.84mm, Inner Diameter: 0.84mm, Color white/white, Pack of 12

sealing insert for standard aluminum pans (p/N 02190041).

FIAS-Furnace sample transfer tube, included in the kit (P/N B3140255).

Film Polarizer for PerkinElmer Lambda 800/900 Double Polarizer Drive. High-performance film polarizer. One part to update the double polarizer drive. For equal energy level in sample and reference beam, P/N B0505530 and P/N B0501282. Wavelength range: 400 to 700nm.

Complete Sampling Probe for AS 90/91 Autosampler, Connects AS 90/91 to AutoPrep 50 Valve 3.

Extended Transfer Line (1650mm). Extra-long transfer line to allow installation of PerkinElmer HS 40XL on the right side of the PerkinElmer AutoSystem GC or to any gas chromatograph where the PerkinElmer HS 40XL is situated at an extended distance.

Ge 45-Degree Flat-Plate for PerkinElmer Spectrum One FTIR HATR Accessory. PerkinElmer Spectrum One HATR Accessory Optional/Replacement Top-Plate.

Ge 45-Degree Trough-Plate for PerkinElmer Spectrum One FTIR HATR Accessory. PerkinElmer Spectrum One HATR Accessory Optional/Replacement Top-Plate.

Universal ATR-1 Reflection Top-Plate for PerkinElmer Spectrum One FTIR. PerkinElmer Spectrum One Universal ATR Optional/Replacement Top-Plate.

Universal ATR-9 Reflection Top-Plate for PerkinElmer Spectrum One FTIR. PerkinElmer Spectrum One Universal ATR Optional/Replacement Top-Plate.

Universal ATR - 1 Reflection Diamond Top-Plate - ZnSe for the Frontier.

Category