Rxreliance

Fitting, 1/4inch Male Npt X 3/16inch Hose Barb, Brass.

Labjack. Anodized aluminum, 20 x 20cm (7.8 x 7.8in) top plate, 28cm (11in) vertical lift

Labjack. Anodized aluminum, 25 x 20cm (10 x 7.8in) top plate, 32cm (12.5in) vertical lift

Eco Model B 4. Stainless Steel Bath, 4L Bath Volume, 200 Degree C Maximum Temperature, Bath Opening 5.3in X 9.4in 9.4in x 5.9in deep

Eco Model B 10. Stainless Steel Bath, 10L Bath Volume, 200 Degree C Maximum Temperature, Bath Opening 11.8 in x 12.9in x 5.9in deep

Eco Model B 20. Stainless Steel Bath, 20L Bath Volume, 200 Degree C Maximum Temperature, Bath Opening 11.8 in x 19.9in x 5.9in deep

Eco Model B 25. Stainless Steel Bath, 25L Bath Volume, 200 Degree C Maximum Temperature, Bath Opening 11.8 in x 19.9in x 7.9in deep

Eco Pt100/Libus Module For External Temperature Probe.

Bath Cover, Stainless Steel, 3 Pieces For Eco Heating Baths: E40 S, E40 G.

Lauda Aqua 90 Heat Transfer Fluid. Operating Temperature Range Of 5 To90Deree C. 10L Container.

Lauda Aqua 90 Heat Transfer Fluid. Operating Temperature Range Of 5 To90Deree C. 20L Container.

Lauda Kryo 60 Heat Transfer Fluid. Operating Temperature Range Of -60 To 80Deree C. 10L Container.

Lauda Kryo 60 Heat Transfer Fluid. Operating Temperature Range Of -60 To 80Deree C. 20L Container.

Lauda Kryo 51 Heat Transfer Fluid. Operating Temperature Range Of -50 To 120Deree C. 10L Container.

Lauda Kryo 51 Heat Transfer Fluid. Operating Temperature Range Of -50 To 120Deree C. 20L Container.

Lauda Kryo 30 Heat Transfer Fluid. Operating Temperature Range Of -30 To 90Deree C. 10L Container.

Lauda Kryo 30 Heat Transfer Fluid. Operating Temperature Range Of -30 To 90Deree C. 20L Container.

Lauda Kryo 20 Heat Transfer Fluid. Operating Temperature Range Of -20 To 180Deree C. 10L Container.

Lauda Kryo 20 Heat Transfer Fluid. Operating Temperature Range Of -20 To 180Deree C. 20L Container.

Lauda Therm 160 Heat Transfer Fluid. Operating Temperature Range Of 60 To 160Deree C. 10L Container.

Lauda Therm 160 Heat Transfer Fluid. Operating Temperature Range Of 60 To 160Deree C. 20L Container.

Lauda Therm 240 Heat Transfer Fluid. Operating Temperature Range Of 50 To 240Deree C. 10L Container.

Lauda Therm 240 Heat Transfer Fluid. Operating Temperature Range Of 50 To 240Deree C. 20L Container.

LAUDA Ultra 350 Heat Transfer Fluid. Operating temperature range of 30 to 200-C in open systems and 30 to 350-C in sealed systems, such as LAUDA USH 400.5L container

Cooling Coil For Eco Immersion Heaters Silver And Gold And Eco Heating Baths: E4 S, E4 G.

Cooling Coil For Eco Heating Baths: E15 S, E15 G.

Pump Kit For All Eco Immersion Heaters And Heating Baths, With 13Mm Plastic Nipples.

Pump Kit For All Eco Immersion Heaters And Heating Baths. With M16x1 stainless steel connections, screw caps and 13mm nipples,

Command Module With Graphic Lcd Display. For remote control via libus. standard with rs232 inferface.

Clamp. For Optima T100, TC120, TX150, TXF200. Alternative to bridge plate. Allows attachment to vertical sided tanks.

Software, Labwise. For Optima TX150/TXF200 and GR150/GP200. Includes USB cable. For control and analysis of Optima thermostats via PC/laptop.

Tank 5L, Stainless Steel, includes bridge-plate for attachment of Optima unit..

Tank 12L. Stainless Steel includes drain-tap, and includes bridge-plate for attachment of Optima unit.

Tank 18L. Stainless Steel, includes drain-tap, and includes bridge-plate for attachment of Optima unit.

Tank 26L. Stainless Steel, includes drain-tap, and includes bridge-plate for attachment of Optima unit.

Tank 38L. Stainless Steel, includes drain-tap, and includes bridge-plate for attachment of Optima unit.

Lid, Stainless Steel, flat design for ST5 tank..

Lid, Stainless Steel, gabled design, removable/hinged for ST12 tank..

Lid, Stainless Steel, gabled design, removable/hinged for ST18 and ST26 tanks..

Refrigerated bath/circulator, LTC4 US kit, 120V. Optima TC150 + R4 refrigeration unit, 20L capacity, includes; drain tap, insulated tubing and clips. Temp range -30 to 100C.

Replacement bridge-plate fits t optima models to st5 tank.

Replacement bridge-plate fits G optima onto P12, P18 tank.

Immersion Cooler, FT-25, PolyScience, Immersion Probe Cooler, Rigid Coil

Immersion Cooler, FT-25, PolyScience, Immersion Probe Cooler, 3 IN. Rigid Coil

Immersion Cooler, FT-25, PolyScience, Immersion Cooler, 1.75 IN. Rigid Coil

Thermal Bath fluid. With a clear color,working temperature of -90 - +60Deg C,flash point +75Deg C,fire point +430Deg C,boiling point of 229Deg C,Ignition temperature of 430Deg C viscosity of 2 mm2/s & density of 0.873 g/cm3(at 20Deg C)with a low toxicity,corrosive tendency & odor.

Thermal Bath fluid. With a clear color,working temperature of -90 - +60Deg C,flash point +75Deg C,fire point +430Deg C,boiling point of 229Deg C,Ignition temperature of 430Deg C viscosity of 2 mm2/s & density of 0.873 g/cm3(at 20Deg C)with a low toxicity,corrosive tendency & odor.

Thermal Bath fluid. With a clear color,working temperature of -60 - +110Deg C,flash point +135Deg C,fire point +433Deg C,boiling point of 205Deg C,Ignition temperature of 433Deg C viscosity of 5 mm2/s & density of 0.918 g/cm3(at 20Deg C)with a low toxicity,corrosive tendency & odor.

Thermal Bath fluid. With a clear color,working temperature of -60 - +110Deg C,flash point +135Deg C,fire point +433Deg C,boiling point of 205Deg C,Ignition temperature of 433Deg C viscosity of 5 mm2/s & density of 0.918 g/cm3(at 20Deg C)with a low toxicity,corrosive tendency & odor.

Thermal Bath fluid. With a clear color,working temperature range of -20 - +160 Deg C,a flash point +163 Deg C,fire point +325 Deg C,boiling point 205 Deg C,viscosity of 10 mm2/s & density of 0.934 g/cm3 (at 20 Deg C) with low toxicity/corrosive tendency & high stability & heat conductivity.

Thermal Bath fluid. With a clear color,working temperature range of -30 - +80Deg C,flash point 120Deg C,fire point 410Deg C,109Deg C boiling point,viscosity of 4.25mm2/s & density of 1.08g/cm3(at 20Deg C),-37Deg C pour point with low toxicity/corrosive tendency & high stability/heat conductivity

Thermal Bath fluid. With a clear color,working temperature range of -30 - +80Deg C,flash point 120Deg C,fire point 410Deg C,109Deg C boiling point,viscosity of 4.25mm2/s & density of 1.08g/cm3(at 20Deg C),-37Deg C pour point with low toxicity/corrosive tendency & high stability/heat conductivity

Thermal Bath fluid. With a light brown color,working temperature of 0 - +220Deg C,flash point 232Deg C,fire point 476Deg C,250Deg C boiling point,viscosity of 20mm2/s & density of 0.9 g/cm3(at 20Deg C),-60Deg C pour point with low toxicity/corrosive tendency & high stability/heat conductivity

Thermal Bath fluid. With a light brown color,working temperature of 0 - +220Deg C,flash point 232Deg C,fire point 476Deg C,250Deg C boiling point,viscosity of 20mm2/s & density of 0.97g/cm3(at 20Deg C),-60Deg C pour point with low toxicity/corrosive tendency & high stability/heat conductivity.

Thermal Bath fluid. With a light brown color,working temperature of 20 - 250Deg C,flash point 285Deg C,fire point 476Deg C,250Deg C boiling point,viscosity of 50mm2/s & density of 0.9 g/cm3(at 20Deg C),-50Deg C pour point with low toxicity/corrosive tendency & high stability/heat conductivity.

Thermal Bath fluid. With a light brown color,working temperature of 20 -250Deg C,flash point 285Deg C,fire point 476Deg C,250Deg C boiling point,viscosity of 50 mm2/s & density of 0.97 g/cm3(at 20Deg C),-50Deg C pour point with low toxicity/corrosive tendency & high stability/heat conductivity.

Thermal Bath fluid. For use with Presto- units only! With a clear color,working temperature of -60 - +250Deg C,flash point 130Deg C,fire point 440Deg C,205Deg C boiling point,viscosity of 5mm2/s & density of 0.918g/cm3(at 20Deg C),-65Deg C pour point with low toxicity/corrosive tendency & high stability/heat conductivity.

Thermal Bath fluid. For use with Presto- units only! With a clear color,working temperature range of -60 - +250Deg C,flash point 130Deg C,fire point 440Deg C,205Deg C boiling point,viscosity of 5mm2/s & density of 0.918g/cm3(at 20Deg C),-65Deg C pour point with low toxicity/corrosive tendency & high stability/heat conductivity

Thermal Bath fluid. For use with Presto- units only! With a clear color,working temperature of -90 - +170Deg C,flash point 70Deg C,fire point 424Deg C,boiling point of 229Deg C,viscosity of 2mm2/s & density of 0.873g/cm3(at 20Deg C),-100Deg C pour point with low toxicity/corrosive tendency & high stability/heat conductivity.

Thermal Bath fluid. For use with Presto- units only! With a clear color,working temperature of -90 - +170Deg C,flash point 70Deg C,fire point 424Deg C,boiling point of 229Deg C,viscosity of 2mm2/s & density of 0.873g/cm3(at 20Deg C),-100Deg C pour point with low toxicity/corrosive tendency & high stability/heat conductivity.

Thermal Bath fluid. For use in Forte HT systems only! With a clear color,working temperature of 50 - 350Deg C,flash point 210Deg C,fire point 235Deg C,boiling point of 390Deg C,viscosity of 47.1mm2/s & density of 1.04g/cm3(at 20Deg C),a pour point -34Deg C with low toxicity/corrosive tendency & high stability/heat conductivity.

Castor platform, Compatible with FP40-HE, FP40-HL, FP40-MA, FP40-ME, FP50-HE, FP50-HL, FP50-MA, FP50-ME, FPW50-HE, FPW50-HL, FPW50-MA, FPW50-ME

Precision reference sensor. With integrated measuring electronics and RS232 connection for direct use with all JULABO calibration baths. Measuring range -40.00-+300 Deg C, dimensions 180 x 4 mm, 1 m cable, immersion depth 90-140 mm.

External Pt100 sensor, 20 x 2 mm, stainless steel, 1.5 m cable, compatible with Cryo-Compact Circulator CF31, CF41, F25-HE, F25-HL, F25-ME.

M+R in-line Pt100 sensor. M+R in-line Pt100 sensor, 1.5 m cable (measurement and control in External system), Compatible with Cryo-Compact Circulator CF31, CF41, F25-HE, F25-HL, F25-ME.

M+R in-line Pt100 sensor. M+R in-line Pt100 sensor, 2 fittings M24x1.5 male, 1.5 m cable. Compatible with temperature control system/process system PRESTO A30, PRESTO A40, PRESTO W40, PRESTO W91, PRESTO W91t.

Extension cable 3.5 metre for Pt100 sensor, Lemosa-type. Compatible with Cryo-Compact Circulator.

Electronic module. With one input and two outputs for external programming or flow sensor or temperature recorder (current/voltage), scalable as well as Standby input and Alarm output. Available as option or to retrofit for circulators of the HighTech series.

Electronic module with analog connections (Input, Output, Standby-In). Compatible with temperature control system/process system PRESTO A30, PRESTO A40, PRESTO W40, PRESTO W91, PRESTO W91t.

CR tubing 1metre, 8mm inner diameter, Suitable for temperatures (-20-+120 Degree C) compatible with Cryo-Compact Circulator CF30, CF31, CF40, CF41, ED.

CR tubing 1metre, 10mm inner diameter, Suitable for temperatures (Chloroprene -20-+120 Degree C) compatible with Cryo-Compact Circulator CF30, CF31, CF40, CF41, ED-13.

CR tubing 1metre, 12mm inner diameter, Suitable for temperatures (Chloroprene -20-+120 Degree C) compatible with Cryo-Compact Circulator CF30, CF31, CF40, CF41, F25-HE.

Viton tubing 1metre, 8mm inner diameter, Suitable for temperatures (-50-+200 Deg C) compatible with Cryo-Compact Circulator CF30, CF31, CF40, CF41, F12-MA.

Viton tubing 1metre, 10mm inner diameter, Suitable for temperatures (-50-+200 Deg C) compatible with Cryo-Compact Circulator CF30, CF31, CF40, CF41, F12-MA.

Viton tubing 1metre, 12mm inner diameter, Suitable for temperatures (-50-+200 Degree C) compatible with Cryo-Compact Circulator CF30, CF31, CF40, CF41, F25-HE.

Triple insulated 0.5m metal tubing. With 2 fittings M16x1 female, suitable for temperatures (-100-+350 Deg C) compatible with HE, HL, SE and SL models.

Triple insulated 1.0m metal tubing. With 2 fittings M16x1 female, suitable for temperatures (-100-+350 Deg C) compatible with HE, HL, SE and SL models.

Triple insulated 1.5m metal tubing. With 2 fittings M16x1 female, suitable for temperatures (-100-+350 Deg C) compatible with HE, HL, SE and SL models.

Triple insulated 3.0m metal tubing. With 2 fittings M16x1 female, suitable for temperatures (-100-+350 Deg C) compatible with HE, HL, SE and SL models.

Single insulated 0.5m metal tubing. With 2 fittings M16x1 female, suitable for temperatures (-50-+200 Deg C) compatible with HE, HL, SE and SL models.

Single insulated 1.0m metal tubing. With 2 fittings M16x1 female, suitable for temperatures (-50-+200 Deg C) compatible with HE, HL, SE and SL models.

Single insulated 1.5m metal tubing. With 2 fittings M16x1 female, suitable for temperatures (-50-+200 Deg C) compatible with HE, HL, SE and SL models.

Single insulated 3.0m metal tubing. With 2 fittings M16x1 female, suitable for temperatures (-50-+200 Deg C) compatible with HE, HL, SE and SL models.

Reinforced tubing, 1 metre, 8 mm inner diameter, -40 to +120 degree C, Compatible with Compact Recirculating Cooler FC1600, FC1600S, FC1600T, FC600, FC600S.

Reinforced tubing, 1 metre, 1/2 inch inner diameter, -40 to +120 degree C, Compatible with Compact Recirculating Cooler FC1600, FC1600S, FC1600T, FC600, FC600S.

Insulation, 1 metre, with 14 mm inner diameter, for CR tubing 8 to 10 mm inner diameter, Compatible with Cryo-Compact Circulator CF30, CF31, CF40, CF41, ED-13.

Insulation, 1 metre, with 12 mm inner diameter,18 mm inner wall, and Reinforced tubing 8 mm inner diameter, Compatible with Refrigerated/Heating Circulator CF30, CF31, CF40, CF41, ED-13.

Viton sleeves 2, Diameter 2mm, for sensors, thermometers etc. Suitable for Calibration Circulators.

Viton sleeves 2, Diameter 3mm, for sensors, thermometers etc. Suitable for Calibration Circulators.

Viton sleeves 2, Diameter 4mm, for sensors, thermometers etc. Suitable for Calibration Circulators.

Viton sleeves 2, Diameter 5mm, for sensors, thermometers etc. Suitable for Calibration Circulators.

Viton sleeves 2, Diameter 6mm, for sensors, thermometers etc. Suitable for Calibration Circulators.

Viton sleeves 2, Diameter 8mm, for sensors, thermometers etc. Suitable for Calibration Circulators.

Tube clamp, 2 Tube clamps, size 1, for CR tubing 8 mm inner diameter, compatible with Cryo-Compact Circulator CF30, CF31, CF40, CF41.

Tube clamp, 2 Tube clamps, size 2, for CR tubing 10 mm and Reinforced tubing 8 mm inner diameter, compatible with Cryo-Compact Circulator CF30, CF31, CF40, CF41.

Icing protection/sleeve for pump connectors.

Pump nozzle insulation set, compatible with Refrigerated-Heating Circulator FP89-HL, FP89-ME.

Expansion vessel for High Temperature Circulator HT30/HT60, connection M16x1, compatible with HT30-M1, HT30-M1-CU, HT60-M3, HT60-M3-CU.

External expansion vessel, 3 litres, compatible with temperature control system/process system PRESTO A30, PRESTO A40, PRESTO W40.