• 0
Shop Products $

AutoPak 30 Power Unit. For 30 ton presses. Self-contained, electrically-operated automatic unit with microprocessor control system, 1/4 hp DC motor, two-stage hydraulic pump, externally adjustable pressure control, pressure gauge, and automatic cycle control. Two-hand anti-tiedown controls. 115V.

Heating Steel Platens. 15.2x15.2cm. Accessories for Carver presses. With digital temperature controls to 343[degree]C. 115V.

Safety Shields. Attractive cabinet encloses pressing area to protect operator from objects which might fly from the compression area. Hinged front access door is clear, shatterproof polycarbonate. Recommended for use on all presses. Will accommodate heater. For Model C press.

Safety Shields. Attractive cabinet encloses pressing area to protect operator from objects which might fly from the compression area. Hinged front access door is clear, shatterproof polycarbonate. Recommended for use on all presses. Will accommodate heater. For Model M press.

Swivel Bearing Plate. Requires safety shield. For Carver presses. Used for crushing and breaking tests of standard 5.1x5.1cm cubes and 5.1x10.2cm cylinders of concrete samples or similar crushing tests. Swivel Bearing Plates adjust slightly to the sample.

Test Cylinder Outfit, 2.86cm ID. For pressing out samples of vegetable oil from oil-bearing materials; molding, briquetting, and forming materials under pressure; and studying effects of various unit pressures. Complete with stainless steel plunger and base plug, nickel-plated cylinder, and ejector.

Polypropylene Screw Lid. An accessory for Special-Purpose Container for Waring Blenders, Models 8470 and 8475.

Two-Speed Laboratory Blenders, 1L. 1L stainless steel container with two-piece vinyl and styrene lid. Two-speed blender(18,000 and 22,000rpm). 120V, 0.40hp motor. Motor housing is epoxy coated. UL listed.

Cover. Lid for containers used with Waring laboratory blenders.

Stainless Steel Container. 1L. With one-piece stainless steel lid. Standard blending assembly with fluoropolymer resin gaskets. Fits all 1L Waring laboratory blenders.

Glass Container with Lid. 1L container. For Two-Speed and Seven-Speed Waring Laboratory Blenders.

Adapter. Accessory to Waring 4L laboratory blenders. Allows use of 1L and smaller containers on 4L motor units.

JAR WITH BLADE ASSEMBLY - 500204

Stainless Steel Blade Assembly for Waring Blenders. Replacement stainless steel blade assembly for 58981-009.

Pulverizer. Dry capacity: 75g. Stainless steel container and pulverizing blade assembly. Snap tight lid. Reduces small bones, nuts, tablets, soils and similar materials. Fits all Waring laboratory blenders (requires an adapter for 2 and 4 liter blenders). Chrome plated die-cast base.

Dry Blending Container. Unique blade configuration designed for pulverizing and homogenizing dry substances. One liter stainless steel container and lid. Fits 1L Waring blenders. Note: Some difficult blending, such as soil processing, requires the use of a larger motor unit.

Cool Base Container. 1L. Complete with a one-piece stainless lid. Fits all 1L Waring laboratory blenders.

Accessories for Stainless Steel Containers for Blenders, Waring - SS510T, Stainless steel temperature control coil

Stainless Steel Mini-Containers for 1L Blenders. 12-37ml. Fits 1L Waring blenders. Chrome plated die-cast base. Transparent snap-fit lid is made from autoclavable, medical-grade PVC Plastisol. Supplied complete with cover and blending assembly with stainless steel blade.

Stainless Steel Mini-Containers for 1L Blenders. 37-110ml. Fits 1L Waring blenders. Chrome plated die-cast base. Transparent snap-fit lid is made from autoclavable, medical-grade PVC Plastisol. Supplied complete with cover and blending assembly with stainless steel blade.

Stainless Steel Mini-Containers for 1L Blenders. 50-250ml. Fits 1L Waring blenders. Chrome plated die-cast base. Transparent snap-fit lid is made from autoclavable, medical-grade PVC Plastisol. Supplied complete with cover and blending assembly with stainless steel blade.

20ml Stainless Steel Micro Container for Waring Blenders. Working capacity 3-20ml. Stainless steel container and blade assembly. fluoropolymer resin gaskets. Can be prechilled for additional heat absorbing capacity. Fits power unit 58984-700 with adapter 58985-225, and other 1 and 2-speed units.

Container. 4L. With two handles. For use with Waring 4L laboratory blenders.

Cover Lid. SS, 4L blender

Cool Base Container. 3.78L. Stainless steel container with jacketed base, allowing for water cooling of bearings during extended operation periods. Does not include lid or cover gasket.

Hazardous Location Blender Motor. 120V. Designed to prevent the electrical arcing and generated heat from igniting ambient atmospheres.Natural finished aluminum and steel housing.Power cord not included.

SWITCH FOR 58988-009 BLENDER. (BHLSW)

Accessories for Hazardous Location Blender Motor, Waring - HL515, Stainless Steel Container, 1 L

10mL Fluoropolymer Resin Pestle for Potter-Elvehjem Tissue Grinders. Precisely constructed with completely interchangeable parts. For use in preparation of tissue homogenates and more. Fluoropolymer resin pestle for soft tissue such as brain or liver.

15Ml Tissue Grinder. Dounce Type

1Ml Tissue Grinder. Dounce Type

40Ml Tissue Grinder. Dounce Type

7Ml Tissue Grinder. Dounce Type

0.1Ml Tissue Grinder. Micro Potter-Elvehjem Type

10Ml Tissue Grinder. Potter-Elvehjem Type

15Ml Tissue Grinder. Potter-Elvehjem Type

2Ml Tissue Grinder. Potter-Elvehjem Type

30Ml Tissue Grinder. Potter-Elvehjem Type

55Ml Tissue Grinder. Potter-Elvehjem Type

5Ml Tissue Grinder. Potter-Elvehjem Type

15Ml Tissue Grinder. Tenbroeck Type

2Ml Tissue Grinder. Tenbroeck Type

7Ml Tissue Grinder. Tenbroeck Type

Adapter. Accessory to Waring 2L laboratory blenders. Allows use of 1L and smaller containers on 2L motor units.

Support stand with rod. Support stand, with stainless steel rod, accommodates 20 kHz converter and accessories. The stand features a black enameled cast-iron base with zinc-plated rod. Stand Base: 9in l x 5.5inw x 24in h (229 x 140 mm), Rod: 24inh x 1/2in dia. (609mm x 13mm)

Converter clamp for use with SFX150, SLP Sonifiers Cell Disruptor.

Converter clamp for use with SFX250, SFX550, 250A, 250D, 450A, 450D Sonifiers Cell Disruptor.

Grinding Stones, Zoro - DR-952, Grinding Stone

Cell Screen SS 10 Mesh 1910U 37 Mm CS5. Cell Screen, 10 Mesh, Material: Stainless Steel, held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key, Size: 1910U, Diameter: 37 mm

Cell Screen SS 20 Mesh 860U 37 Mm CS5. Cell Screen, 20 Mesh, Material: Stainless Steel, held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key, Size: 860U, Diameter: 37 mm

Cell Screen SS 30 Mesh 520U 37 Mm CS5. Cell Screen, 30 Mesh, Material: Stainless Steel, held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key, Size: 520 U, Diameter: 37 mm

Cell Screen SS 40 Mesh 380U 37 Mm CS5. Cell Screen, 40 Mesh, Material: Stainless Steel, held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key, Size: 380U, Diameter: 37 mm

Cell Screen SS 50 Mesh 280U 37 Mm CS5. Cell Screen, 50 Mesh, Material: Stainless Steel, held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key, Size: 280U, Diameter: 37 mm

Cell Screen SS 60 Mesh 230U 37 Mm CS5. Cell Screen, 60 Mesh, Material: Stainless Steel, held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key, Size: 230U, Diameter: 37 mm

Cell Screen SS 100 Mesh 140U 37 Mm CS5. Cell Screen, 100 Mesh, Material: Stainless Steel, held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key, Size: 140U, Diameter: 37 mm

Cell Screen SS 150 Mesh 94U 37 Mm CS5. Cell Screen, 150 Mesh, Material: Stainless Steel, held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key, Size: 94 U, Diameter: 37 mm

Cell Screen SS 300 Mesh 46U 37 Mm CS5. Cell Screen, 300 Mesh, Material: Stainless Steel, held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key, Size: 46 U, Diameter: 37 mm

Cell Screen SS 400 Mesh 38U 37 Mm CS5. Cell Screen, 400 Mesh, Material: Stainless Steel, held in place by a retaining ring on the bottom of the pan that is tightened using the screen replacement key, Size: 38 U, Diameter: 37 mm

Pestle only Homogenizer Glass SS 16 Mm. Glass Pestle only, Homogenizer, Prepare Cell Suspensions & Gel Extraction of Proteins, All Stainless Steel Construction, Size: 16 mm

Polytron® Generator, PT-DA/2MEC, Kinematica - 11030266, Polytron® 12 mm generator, PT-DA 12/2MEC-E157

Polytron® Generator, PT-DA/2EC-E192, Kinematica - 11030069, Polytron® 20 mm generator, PT-DA 20/2EC-E192

Polytron® Generator, PT-DA/2EC-E192, Kinematica - 11030264, Polytron® 20 mm generator, PT-DA 25/2EC-E192

Polytron® Generator, PT-DA/2MEC, Kinematica - 11030263, Polytron® 20 mm generator PT-DA 20/2MEC-E192

Polytron® 20 mm Tablet Grinder Generator, PT-DA 20/2XEC, Kinematica - 11030255, Polytron® 20 mm tablet grinder generator, PT-DA 20/2XEC-E116

Polytron® 20 mm Tablet Grinder Generator, PT-DA 20/2XEC, Kinematica - 11030277, Polytron® 20 mm tablet grinder generator, PT-DA 20/2XEC-E157

Polytron® Generator, PT-DA/BEC (BIOTRONA), Kinematica - 11030291, Polytron® 25 mm generator, PT-DA 25/BEC-E192 (BIOTRONA)

Polytron® Generator, PT-DA/2WEC-E192, Kinematica - 11030260, Polytron® 25 mm generator, PT-DA 25/2WEC-E192

Polytron® Generator, PT-DA/2WEC-E192, Kinematica - 11030258, Polytron® 20 mm generator, PT-DA 20/2WEC-E192

PLATE STAND ST-P13/320 SS FOR PT 1200 E - 11040007

HINGE STAND ST-P 01/200 SS W/RIVET PLUG - 11040012

STANDARD DISPERSING AGGREGATE F/PT-DA 30 - 11030305

Bead Genieâ„¢ Bead Mixers, Scientific Industries Inc - SI-B102, Bead mixer, Bead Genieâ„¢, EU-plug

Bead Genieâ„¢ Bead Mixers, Scientific Industries Inc - SI-B103, Bead mixer, Bead Genieâ„¢, UK-plug

Bead Genieâ„¢ Bead Mixers, Scientific Industries Inc - SI-B104, Bead mixer, Bead Genieâ„¢, CH-plug

BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Scientific - IPD9600-E

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - IPD9600-25S, Stainless steel jar, 25 ml (set of 2)

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - IPD9600-50S, Stainless steel jar, 50 ml (set of 2)

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - IPD9600-50G, Replacement gasket for 50 ml stainless steel jar

Accessories for BeadBlaster 96 Ball Mill and Microtube Homogenizer, Benchmark Industrial Products - IPD9600-CK, Cryokit, includes bucket, gloves, goggles and tongs, for use with LN2

GRINDER CRYOGENIC CG-900 CRYO-BLADE 230V - CG-900-230

KIT LYSING PROTEIN SAFE HARD TISSUE - P000972-LYSK0-A.0

Accessories for ULTRA-TURRAX® T10 Basic Disperser, IKA - 0003304000, Dispersing Tool S10N-5G

Accessories for ULTRA-TURRAX® T10 Basic Disperser, IKA - 0003305500, Dispersing Tool S10N-8G

Accessories for ULTRA-TURRAX® T10 Basic Disperser, IKA - 0003370100, Dispersing Tool S10N-10N

Accessories for ULTRA-TURRAX® T10 Basic Disperser, IKA - 0003386000, R370 Stand

Accessories for ULTRA-TURRAX® T10 Basic Disperser, IKA - 0003372000, R200 Clamp

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 2.0ML TUBE ONLY.

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 2.0ML PESTLE ONLY.

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 2ML TISSUE GRINDER.

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 15ML TUBE ONLY.

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 15ML PESTLE ONLY.

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 15ML TISSUE GRINDER.

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 30ML TUBE ONLY.

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 30ML PESTLE ONLY.

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 50ML TUBE ONLY.

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 50ML PESTLE ONLY.

8325 TISSUE GRINDER, Tapered, Glass, Interchangeable. 50ML TISSUE GRINDER.

8345 TISSUE GRINDER, Interchangeable. GRINDER ROD.

8345 TISSUE GRINDER, Interchangeable. GRINDER BARREL.

Category