• 0
Shop Products $

Safety Padlock Storage Module. Provides safe storage and controls access to padlocks. Durable sintra material with lockable, transparent acrylic doors so locks are always visible. Each hook can hold 2 locks. Holds 40 locks. Measures 30H x 15W x 3 1/2D. Padlocks sold separately

Hubbell Plugout. Accepts plugs with maximum 114.3mm diameter and 25.8cm length and 54mm cord.

Hubbell Plugout. Small. Accepts plugs with maximum 70mm diameter and 12cm length and 25mm cord.

Wall Switch Lockout. Wall switch lockouts may be used with most wall-mounted switches and are simple to install using existing screws. Made of high visibility red. Device can be used to lock switches on or off.

Oversized Breaker Lockout. Perfect for 480/600V switches up to 2 1/4 wide and 7/8 thick. Made of durable polypropylene and glass filled impact-modified nylon. Applies in seconds with thumbscrew mechanism so no screwdriver needed.

Universal Multi-Pole Breaker Lockout. 6 lockouts per pack. Lockout for circuit breakers.

Gate Valve Lockout. Color: blue. Size: 12.7x16.5cm.

Gate Valve Lockout. Made of injection-molded polypropylene, rugged for superior impact and chemical resistance. Easily withstands temperature extremes. Knockout center accommodates OS&Y or rising stem valves. Lockouts accept locks with shackles up to 3/8 diameter. 6 1/2 X 10. Blue.

Pneumatic Quick-Disconnect Lockout. 3/8 and 1/2 male air hose fittings (1 pack).

Pneumatick Lockout. Quick-disconnect lockout is applied to the male fitting, isolating equipment from all compressed air sources. Device accommodates the majority of 1/4, 3/8 and 1/2 male fittings. Lockout accepts padlocks with 1/4 or 9/32 shackles.

Lockout for Miniature SMC Models AR2000 / NAR2000. install lockout on regulator rod. snap replacement cap on regulator. Comes with lockout. cap and allen wrench. .

Lockout for Intermediate SMC Models AR3000 / NAR3000. install lockout on regulator rod. snap replacement cap on regulator. Comes with lockout. cap and allen wrench. .

CryoPen, Black Indelible.

SP Bel-Art Protective Tapes, Bel-Art Products, a part of SP - F13491-0150, Protective Tape Rolls

SP Bel-Art Write-Onâ„¢ Label Tape, Bel-Art Products, a part of SP - F13480-0075, Tape Rolls with 2.5 cm (1 IN.) Dia. Core

SP Bel-Art Write-Onâ„¢ Label Tape, Bel-Art Products, a part of SP - F13482-0075, Tape Rolls with 2.5 cm (1 IN.) Dia. Core

Label. PolarSafe Cryogenic Storage Label, Blue Dots for 0.5 - 1.5mL tubes, 9.5mm, made from chemically inert polyester with a unique adhesive formulated to adhere to laboratory glass and plastic ware.

Label. PolarSafe Cryogenic Storage Label, Red Dots for 0.5 - 1.5mL tubes, 9.5mm, made from chemically inert polyester with a unique adhesive formulated to adhere to laboratory glass and plastic ware.

Label. PolarSafe Cryogenic Storage Label, Green Dots for 0.5 - 1.5mL tubes, 9.5mm, made from chemically inert polyester with a unique adhesive formulated to adhere to laboratory glass and plastic ware.

Label. PolarSafe Cryogenic Storage Label, Yellow Dots for 0.5 - 1.5mL tubes, 9.5mm, made from chemically inert polyester with a unique adhesive formulated to adhere to laboratory glass and plastic ware.

Label. PolarSafe Cryogenic Storage Label, Purple Dots for 0.5 - 1.5mL tubes, 9.5mm, made from chemically inert polyester with a unique adhesive formulated to adhere to laboratory glass and plastic ware.

Accessories for BioClaveâ„¢ Benchtop Autoclaves, Chemglass - CLS-1191-001, Printer for BioClaveâ„¢ 16 L benchtop autoclave

VA LAB SYSTEM LABELS. 4 in. x 2-3/8 in. direct thermal (infrared) white label with glove adhesive for VA Hospital Information Systems. Core Size: 3 in. Max OD: 6 in. Carrier width 2-1/2 in. 800 labels/roll and 4rolls/case.

VA LAB SYSTEM LABELS. 4 in. x 2-3/8 in. coated thermal white label with glove adhesive for VA Hospital Information Systems.Core Size: 3in. Max OD: 6in. Carrier width 2-1/2in. 800 labels/roll and 4rolls/case.

SOFTLAB LAB SYSTEM LABELS. 1 in. x 2-1/28 in. coated thermal white label with glove adhesive for use on VA Hospital Information Systems direct thermal printers. Core Size: 3 in. Max OD: 8in. Carrier width 2-5/8in. 4,000 labels/roll and 2rolls/case.

MISYS/SUNQUEST IS LABELS. 1-3/16 in. x 4-1/8 in. direct thermal (infrared) white labels with glove adhesive for use on MISYS/Sunquest Information Systems direct thermal printers. Core Size: 3 in. Max OD: 7-1/2 in. Carrier width 4-3/8 in. 4,300 labels/roll and 2rolls/case.

MISYS/SUNQUEST IS LABELS. 1-3/16 in.x 4-1/8 in. coated thermal white labels with glove adhesive for use on MISYS/Sunquest Information Systems direct thermal printers. Core Size: 3 in. Max OD: 7-1/2 in.. Carrier width 4-3/8 in. 4,300 labels/roll and 2 rolls/case.

MISYS/SUNQUEST IS LABELS. 1-3/16 in. x 4-1/8 in. coated thermal white labels with extra permanent adhesive for use on MISYS/Sunquest Information Systems direct thermal printers. Core Size: 3 in. Max OD: 7-1/2 in. Carrier width 4-3/8 in. 4,300 labels/roll and 2 rolls/case.

Misys/Sunquest Is Labels. (Dps-Sqblstr) 1-3/16 In.X 4-1/8 In. Thermal (Infrared) White Labels, Using A Black Bar Sensor, With Glove Adhesive For Misys/Sunquest Information Systems Direct Thermal Printers. Core 1-1/2 In. Max Od: 4 In. Carrier Width 4-3/16 In. 1,000 Labels/Roll And 5 Rolls/Case.

Misys/Sunquest Is Labels. (Td-Sqblstr) 1-3/16 In.X 4-1/8 In. Coated Thermal White Labels, Using A Black Bar Sensor, With Glove Adhesive For Misys/Sunquest Information Systems Direct Thermal Printers. Core Size: 1-1/2 In. Max Od: 4 In. Carrier Width 4-3/16 In. 1,000 Labels/Roll And 5 Rolls/Case.

LABEL MYSIS/SUNQ LAB SYSTM CS1 - DPS-SQ7

MEDITECH LABELS. 1-1/4 in.x 4 in. direct thermal (infrared) white labels with red border, with glove adhesive for use on MEDITECH Information Systems direct thermal printers. Core Size: 3in. Max OD: 7in. Carrier width 4-1/8in. 3,600 labels/roll and 1roll/case.

MEDITECH LABELS. 1-1/4 in.x 4 in. direct thermal (coated) white labels with red border, with glove adhesive for use on MEDITECH Information Systems direct thermal printers. Core Size: 3 in. Max OD: 7 in. Carrier width 4-1/8 in. 3,600 labels/roll and 1roll/case.

MEDITECH LABELS. 1-1/4 in. x 4 in. direct thermal (infrared) white labels, with glove adhesive for use on MEDITECH Information Systems direct thermal printers. Core Size: 3 in.. Max OD: 7 in. Carrier width 4-1/8 in. 3,600 labels/roll and 1roll/case.

MEDITECH LABELS. 1-1/4 in. x 4 in. direct thermal (coated) white labels, with glove adhesive for use on MEDITECH Information Systems direct thermal printers. Core Size: 3 in. Max OD: 7 in. Carrier width 4-1/8 in. 3,600 labels/roll and 1roll/case.

Direct Thermal Printer Labels, TimeMed - TD-MIT-444, Glove-friendly, coated thermal labels

CERNER LABELS. 4-1/2 in. x 4 in. direct thermal (infrared) white labels, with glove adhesive for use on PathNet Information Systems direct thermal printers. Core Size: 3 in. Max OD: 7 in. Carrier width 4-1/8 in. 1,000 labels/roll and 2 rolls/case.

Direct Thermal Printer Labels, TimeMed - TD-PN6-SL, Glove-friendly, coated thermal labels

Direct Thermal Printer Labels, TimeMed - TD-PN6A-SL, Glove-friendly, coated thermal labels

CERNER LABELS. 15/16 in.x 15/16 in. thermal transfer white slide labels, with glove adhesive for use on Cerner Millenium Sortware Systems thermal transfer printers. Core Size: 3 in. Max OD: 5 in. Carrier width 3-7/8 in. 7,400 abels/roll and 3 rolls/case.

MICROTRAX LABELS. 7/8 in. x 17/8 in. thermal transfer white film slide labels, with permanent adhesive for use on MicroTrax thermal transfer printers. Labels run 4 across. Core Size: 1-1/2 in. Max OD: 5 in. Carrier width 4 in. 7,400 labels/roll and 3 rolls/case.

DIRECT THERMAL LABELS. 1-1/8 in. x 2 in. coated direct thermal white film label with permanent adhesive for use on thermal printers. Core Size: 3 in. Max OD: 8 in. Carrier width 2-1/8 in. 5,000 labels/roll and 6 rolls/case.

DIRECT THERMAL LABELS. 1-1/4 in. x 2 in. coated thermal white label, with glove adhesive for use on direct thermal printers. Core Size: 3 in. Max OD: 6-1/2 in. Carrier width 2-1/8 in. 3,000 labels/roll and 6 rolls/case.

DIRECT THERMAL LABELS. 1-1/4 in. x 2 in. coated direct thermal white film label with permanent adhesive for use on thermal printers. Core Size: 3 in. Max OD: 7 in. Carrier width 2-1/8 in. 3,000 labels/roll and 6 rolls/case.

THERMAL TRANSFER LABELS. 7/8 x 7/8 in. thermal transfer slide white labels with glove friendly adhesive for use with thermal transfer printers. Core Size: 1-1/2 in. Max OD: 5 in. Carrier width 4 in. 7,400 labels/roll and 3 rolls/case.

THERMAL TRANSFER LABELS. 15/16 in. x 15/16 in. thermal transfer slide white labels with glove friendly adhesive for use with thermal transfer printers. Core Size: 1-1/2 in. Max OD: 5 in. Carrier width 4 in. 7,400 labels/roll and 3 rolls/case.

MICROBIOLOGY LABELS. 6 x 3-1/4 in. infrared thermal microbiology white labels with glove friendly adhesive for use with direct thermal printers. Sheet contains nine small labels and three larger labels. Core Size: 3 in. Max O.D. 7-3/4 in. Carrier Width 3-3/8 in. 1,000/roll and 8 rolls/case.

MICROBIOLOGY LABELS. 6 in. x 3-1/4 in. coated thermal microbiology white labels with glove friendly adhesive for use with direct thermal printers. Sheet contains nine small labels and three larger labels. Core Size: 3 in. Max O.D. 7-3/4 in. Carrier Width 3-3/8 in. 1,000/roll and 8 rolls/case.

COATED THERMAL LABELS. 1 X 4 in. coated thermal glove adhesive white label for use with direct thermal printers. Additional sizes are available. Core Size: 1 in. Max. O.D. 4 in. Carrier width: 4-1/8 in. 1,300/roll and 4 rolls/case.

THERMAL PRINTER LABELS. 1-1/4 X 2 in. coated thermal white film label with extra permanent adhesive for use with direct thermal printers. Core Size: 3 in. Max. O.D. 8 in. Carrier width: 2-1/8 in. 2,000/roll and 4 rolls/case.

RH NEGATIVE IDENTIFIER LABELS. 2-1/4 in. x 1 in. Rh Negative fluorescent red label with black imprint. 420/roll and 1 roll/case.

UNCROSS MATCHED BLOOD LABELS. 2-1/4 in. x 1 in. uncross matched blood fluorescent red label with black imprint. 420 labels/roll and 1 roll/case.

FROZEN PLASMA LABELS. 2-15/16 in. x 1 in. Fresh frozen plasma fluorescent pink label with black imprint. 333 labels/roll and 1 roll/case.

UNCROSS MATCHED BLOOD LABELS. 2-15/16 in. x 1-1/2 in. Uncrossed matched blood fluorescent red label with black imprint. 333 labels/roll and 1 roll/case.

Laser Printer Labels, TimeMed - DPSL1-4-M, Laser printer labels

Laser Printer Labels, TimeMed - DPSL2-4-M, Laser printer labels

Laser Printer Labels, TimeMed - DPSL-PC5-2, Laser printer labels

Laser Printer Labels, TimeMed - DPSL-PC2-2, Laser printer labels

MULTIPURPOSE LABELS. 2 X 3 in. smudgeproof litho white labels with permanent adhesive for use with direct thermal printers. Core: 1 in. Max O.D 4-1/2 in. Carrier width: 3-1/4 in. 500 labels/roll and 1 roll/case.

MULTIPURPOSE LABELS. 1 X 3 in. thermal transfer white labels with glove friendly adhesive for use with direct thermal printers. Core: 3 in. Max O.D 8 in. Carrier width: 3-1/8 in. 5,500 labels/roll and 2 rolls/case.

MULTIPURPOSE LABELS. 1 in. X 3 in. film thermal transfer white labels with glove friendly adhesive for use with direct thermal printers. Core: 3 in. Max O.D 8 in. Carrier width: 3-1/8 in. 5,330 labels/roll and 2 rolls/case.

MULTIPURPOSE LABELS. 1 X 2 in. infrared thermal white labels with glove friendly adhesive for use with direct thermal printers. Core: 3 in. Max O.D 7-1/2 in. Carrier width: 2-1/8 in. 500 labels/roll and 1 roll/case.

MULTIPURPOSE LABELS. 1-3/8 X 2-1/8 in. infrared thermal white labels with glove friendly adhesive for use with direct thermal printers. Core: 3 in. Max O.D 7-1/2 in. Carrier width: 2-1/8 in. 420 labels/roll and 1 roll/case.

VWR Write-on Metal Tags. Permanently engrave lab information on this metal tag using a ballpoint pen. Engrave on both sides of tag. Durable, and suited for use in extreme hot or cold temperatures. 79x35mm. Package of 48 tags with wire fasteners.

Hazardous Warning Labels. Hand write the chemical name, fill in the warning diamond and circle the appropriate personal protection symbols. A self-laminating flap then seals the writing and protects the label from solvents, acids, etc. 51x89mm label.

Hazardous Warning Labels. Hand write the chemical name, fill in the warning diamond and circle the appropriate personal protection symbols. A self-laminating flap then seals the writing and protects the label from solvents, acids, etc. 101x178mm label.

Confined Space OSHA Danger Signs, National Marker - D162AP, 7.62 x 12.7 cm (3 x 5 IN.)

Machine Signs, PS Vinyl, National Marker - DGA19AP

Asbestos and Lead Labels, National Marker - PRD92, Warning labels

Label, Biohazard. 17.8x17.8cm sign made from .076cm rigid plastic. Contains biohazard symbol and word.

Hazard Warning Labels. Communicate hazardous materials information compactly. These labels are diamonds on which each of four colored sectors (blue, red, yellow, and white) can be written on as desired to indicate hazards present. Pressure sensitive paper. Label size: 2.2x2.2cm. Roll of 750.

Hazard Warning Labels. Square labels with four bars: blue (H for Health), red (F for Fire), yellow (R for Reactivity), and white (PP for Personal Protection). Each bar has a white checkbox used to indicate hazards present. Pressure-sensitive paper. Label size: 2.2x2.2cm. Roll of 750.

DOT Labels, National Marker - DL87AP, DOT labels

Biohazard Labels. Specialty Biohazard Labels comply with OSHA labeling standards for bloodborne pathogens. They feature brilliant fluorescent color as mandatedby OSHA and permanent, pressure-sensitive adhesive to keep them securely in place as long as needed. 8X10 inches. 10 labels per pack.

LABEL MEDIUM MATERIAL 1.5INX2 PK107 - SBH-7

LABEL 10% FORMA FORMALD WARN - SB-381H

LBL FORMALDE WARN 1X2 500/RL - SB-385H

TAPE,BIOHZRD,1X1,500LBL PER RL - SBH-8

Specimen Label. Labels are 3.8x8.9cm (1.5x3.5). 12.7m (500) roll. Adheres to glass, plastic, waxed surfaces. Write on with ball point, pencil, felt marker. Includes prelabeled areas for name, date, sex, age, room, doctor, specimen, and number.

Labels. 2.54cm x 12.7m (1x500) tape labels. Imprint: Danger Carcinogens. Red tape/Black Imprint.

TPE LBL YEL CHEM CARCN 1X500IN - SL-7

Radioactive Warning Label. 2.54cm x 12.7m (1x500) tape. Printed with magenta ink on yellow background. Includes radiation symbol and legend CAUTION RADIOACTIVE MATERIAL. Can be printed on with pen, pencil, felt marker or rubber stamp

Labels. Package of 5 rolls of 3.8cm x 12.7m (1.5x500) tape labels. Imprint: Caution Radioactive Materials. Series: ______. Date: ______. Yellow tape/magenta imprint.

TAPE RADIOAC 2X500/RL - SRA-6PKG

RING BINDER CHART LABELS-PLAIN - CL-1

LABELS TYVEK 3/4 X 1-1/2 INCH - STV-2

IV NURSING LABEL (- HRS) - IV-3

Labels. 3.8x7.6cm (1.5x3) blank labels. Supplied in rolls. Polyethylene coated for extra strength. Permanent adhesive.

LABEL IV NURSING 72 HRS - IV-4

Vac Label. White. 2.54x5.7cm (1x2.25). Features permanent glove-proof adhesive with special affinity for silicone-treated surfaces. Supplied in rolls of 1000 labels with perforations between each. Stays securely on tubes yet wont stick to latex gloves. Nonsmudge surface.

LABELS VAC 1INX3IN PK1000 - SVL-14-1

LABELS BLOOD BANK GRP RH+1/2IN - B720511

LABELS BLOOD BANK GROUP B 1IN - B72056

LABELS BLOOD BANK GROUP AB 1IN - B72057

Labels. Imprint: CAUTION Sensitive Electronic Devices. Static Sensitive Contents, Special Handling Required. Includes area for write-in labeled Contents Labels measure 7.6x5.1cm (3x2). Supplied in rolls. Reusable

Category