• 0
Shop Products $

CELLROLL Extender Complete, necessary for horizontal extension of CELLROLL System, includes storage deck

Ratcheting Clamp For Mini-300 Genie, Extra ratcheting clamp for additional rows for the Mini-300 Orbital-Genie (Use only with model SI-M15xx), Size: universal

Adhering Mat For Mini-300 Genie, Blue adhering mat is an alternative to flask clamps or clamps for securing vessels to the Mini-300 Orbital-Genie platform, 11.8in x 11.18in (300mm x 300mm) Patented material is naturally adhering

Utility Box Carrier 36in x 24in x 6in. Utility Box Carrier, Includes 1 Crosswise Bar Clamp, For use with Large Reciprocal Shaker, Dimension: 36in x 24in x 6in

Utility Box Carrier with Plexiglass Cover (Lid) Includes 5 Bar Clamps and 2 Bungie Cord Strap.

Inversion Tumbler Programmable 0 - 100 rpm. Inversion Tumbler Programmable, Rotating Speed: 0 - 100 rpm, Rotation Direction: Forward and Reverse, Maximum Load Capacity: 12.5 lbs, Container Capacity: 6 Jars/Bottles up to 7in tall and 3in in diameter, Electrical: 115V, Dimension: 37 x12 x15 in

Stackable Tray For Mini-100 Genie, A non-slip, chemical resistant tray that can be stacked onto the Mini-100 Orbital-Genie's existing platform tray, increasing the capacity for mixing up to three levels

Top Plate platform, with attached rubber mat, Dimensions: 21 x 21 x 0.25 in.

Perforated Platform for Erlenmeyer Flask Holder placement, Dimensions: 21 x 21 x 1 in.

Utility Box Carrier Includes 2 crosswise and lengthwise bar clamps, Dimensions: 21 x 21 x 6 in.

Utility Box Carrier Includes 1 bar clamp, Dimensions: 15 x 15 x 4 in.

Shaker Platform perforated for Flask Holder placement, Dimensions: 24 x 27 x 1 in.

Utility Box Carrier and Carrier Bundle 24 x 27 x 6 in. Utility Box Carrier and Carrier Bundle Includes 2 crosswise and lengthwise bar clamps, Dimensions: 24 x 27 x 6 in

Platform 76x46cm. Platform, Material: Aluminium, For Innova 44/44R incubator shaker, Slide out, 76 x 46 cm, not interchangeable, Volume: 500 ml Erlenmeyer flask

Platform 76x46cm 2l. Platform, Material: Aluminium, For Innova 44/44R incubator shaker, Slide out, 76 x 46 cm, not interchangeable, Volume: 2l Erlenmeyer flask

Platform 0.95cm. Platform, Material: Aluminium plate, Heavy duty, For Innova 44/44R only incubator shaker and for shaking full loads of flasks, 1GC»L and larger, containing more than 20GC»% volume or with baffles, Universal platform, Thickness: 0.95cm

Erlenmeyer flask Platform 0.95cm 2l. Erlenmeyer flask Platform, Material: Aluminium plate, Heavy duty, For Innova 44/44R only incubator shaker, 76x46cm and for shaking full loads of flasks, 1GC»L and larger, containing more than 20GC»% volume or with baffles

Stacking kit, For stacking one additional 44 or 44R incubator shaker.

Stacking kit, For stacking one additional 44 or 44R incubator shaker with Innova 4400/4430.

Base riser 10.2cm. Base riser, Increases the height of the shaker for easier access, For Innova 44/44R incubator shaker, For use with up to three stacked units, Diameter: 10.2 cm, Size: Short

Base riser 16in. Base riser, To raise shakers by 16in, For use with a single unit Stacking Kit, Bolts shakers together for stability when stacking two or more units, One needed for two shakers, Two needed for three shakers, For innova 44/44R incubator sha

Base riser 10.2cm. Base riser, Increases the height of the shaker for easier access, For Innova 44/44R incubator shaker, For use with up to two stacked units, Diameter: 30.5 cm, Size: Medium

Test tube rack 8-11mm. Test tube rack, Material: Stainless-steel with inserts to help retain tubes and prevent them from spinning in the rack, Have an adjustable angle and tube height support, Finger-tight knobs, For biological shaker and for easy transpo

Test tube rack 12-15mm. Test tube rack, Material: Stainless-steel with inserts to help retain tubes and prevent them from spinning in the rack, Have an adjustable angle and tube height support, Finger-tight knobs, For biological shaker and for easy transp

Test tube rack 18-21mm. Test tube rack, Material: Stainless-steel with inserts to help retain tubes and prevent them from spinning in the rack, Have an adjustable angle and tube height support, Finger-tight knobs, For biological shaker and for easy transp

Test tube rack 22-26mm. Test tube rack, Material: Stainless-steel with inserts to help retain tubes and prevent them from spinning in the rack, Have an adjustable angle and tube height support, Finger-tight knobs, For biological shaker and for easy transp

Test tube rack 26-30mm. Test tube rack, Material: Stainless-steel with inserts to help retain tubes and prevent them from spinning in the rack, Have an adjustable angle and tube height support, Finger-tight knobs, For biological shaker and for easy transp

Microplate rack, Stack 3 deep well or 9 standard plates, For biological shaker.

Additional Shelf and brackets, For Innova 42/42R incubator shaker.

Erlenmeyer Flask Dedicated Platform 1l. Erlenmeyer Flask Dedicated Platform, Material: Aluminum, Dimension: 30x18in, For 44/44R incubator shaker, Size: 1l

Rack 8-11mm. Rack, Small, Diameter: 8-11mm, holds 48 Tubes, adjustable angle, tube height support, Made from stainless-steel with inserts to help retain tubes & prevent them from spinning in rack, Finger-tight knobs,quickly adjust angle, or release rack f

Rack 15-18mm. Rack, Small, Diameter: 15-18mm, holds 24 Tubes, adjustable angle, tube height support, Made from stainless-steel with inserts to help retain tubes & prevent them from spinning in rack, Finger-tight knobs,quickly adjust angle, or release rack

Rack 18-21mm. Rack, Small, Diameter: 18-21mm, holds 18 Tubes, adjustable angle, tube height support, Made from stainless-steel with inserts to help retain tubes & prevent them from spinning in rack, Finger-tight knobs,quickly adjust angle, or release rack

Rack 26-30mm. Rack, Small, Diameter: 26-30mm, holds 12 Tubes, adjustable angle, tube height support, Made from stainless-steel with inserts to help retain tubes & prevent them from spinning in rack, Finger-tight knobs,quickly adjust angle, or release rack

Rack 15-18mm. Rack, Medium, Diameter: 15-18mm, holds 31 Tubes, adjustable angle, tube height support, Made from stainless-steel with inserts to help retain tubes & prevent them from spinning in rack, Finger-tight knobs,quickly adjust angle, or release rac

Stacking kit, for stacking Innova 4200/4230 units on top of Innova 42/42R shakers.

Microplate rack, for single layer of five plates, for Biological Shakers.

Photosynthetic Light Bank - installation required for Innova 42R only, Cast iron triple-eccentric counterbalanced drive, controls automatically changes temperature, speed, and optional photosynthetic and UV germicidal lights at

UV Germicidal Lamp - installation required for Innova 42R only, Cast iron triple-eccentric counterbalanced drive, controls automatically changes temperature, speed, and optional photosynthetic and UV germicidal lights at timed interval

Humidity Monitor - installation required (for Innova 42/42R), Cast iron triple-eccentric counterbalanced drive, controls automatically changes temperature, speed, and optional photosynthetic and UV germicidal lights at timed intervals, B

Culture Drawer, prevents plates from drying (for Innova 42+42R).

Gassing Manifold-12-Port, installation required, for direct gassing into flasks (for Innova 42/42R), Cast iron triple-eccentric counterbalanced drive, controls automatically changes temperature, speed, and optional photosynthetic

GTS Non-Slip Platform (for low speed). GTS Non-Slip Platform (for low speed), non-slip tray platform that can be used on all Genie Temp-Shaker products by simply removing existing platform and installing this one with NO tools required

GTS Ratcheting Clamp Platform, Interchangeable platform that can be used on all Genie Temp-Shaker products by simply removing existing platform and installing this one with NO tools required

GTS Flask Clamp Platform, Interchangeable platform that can be used on all Genie Temp-Shaker products by simply removing existing platform and installing this one with NO tools required

GTS Adhering Mat Platform, Interchangeable platform that can be used on all Genie Temp-Shaker products by simply removing existing platform and installing this one with NO tools required

Platform for sticky pads.

Handheld UV Analyzer Stand, forHandheld UV Analyzer, H-type stand to hold instrument, The height and angle can be adjusted.

Plate platform four standard.

Solaris 12x14in Universal platform.

Solaris 12x14 Dual Stack Universal platform.

Kit Du Stack Universal Platform 12X14In. Solaris 12x14 Dual Stack Universal platform - upgrade kit (one 12x14 platform, screw set, and support rods)

Solaris 18x18 Universal platform.

Solaris 18x18 Dual Stack Universal platform.

Kit Du Stack Universal Platform 18X18In. Solaris 18x18 Dual Stack Universal platform - upgrade kit (one 18x18 platform, screw set, and support rods)

Solaris 18x24 Universal platform.

Solaris 18x30 Universal platform.

Solaris 18x30 Dual Stack Universal platform.

Kit Du Stack Universal Platform 18X30In. Solaris 18x30 Dual Stack Universal platform - upgrade kit (one 18x30 platform, screw set, and support rods)

Solaris 24x36 Universal platform.

Spare screw set for Solaris clamps.

Platform spare part kit for SK2000 (Platform screws, tool, thread locker).

Platform spare part kit for SK4000 (Platform screws, tool, thread locker).

Carousel for Boekel Mini Tube Rocker, 36 x1.5/2.0mL Tubes.

Carousel for Boekel Mini Tube Rocker, 10 x 10/15mL Tubes and 10 x 5/7mL Tubes.

Carousel for Boekel Mini Tube Rocker, 6 x 50mL Tubes.

DS 6.2 Spare clips Diameter: 12mm. DS 6.2 Spare clips Diameter: 12, 12 Spare clips for IKA Loopsters, for the equipment of the Universal disc DS 6. Weight: 0.052 kg

DS 6.3 Spare clips Diameter: 16mm. DS 6.3 Spare clips Diameter: 16, 12 Spare clips for IKA Loopsters, for the equipment of the Universal disc DS 6. Weight: 0.07 kg

DS 6.4 Spare clips Diameter: 25mm. DS 6.4 Spare clips Diameter: 25, 12 Spare clips for IKA Loopsters, for the equipment of the Universal disc DS 6. Weight: 0.13 kg

DS 6.5 Spare clips Diameter: 28mm. DS 6.5 Spare clips Diameter: 28, 12 Spare clips for IKA Loopsters, for the equipment of the Universal disc DS 6. Weight: 0.154 kg

DS 6 Universal tube attachment, for IKA Loopster, flexibly equippable with spare clips, 0.4629 kg.

TR 1 Tube insert 24 x 1.5 ml. TR 1 Tube insert, Insert for IKA Trayster basic and Trayster digital. Suitable for raction tubes, 24 x 1.5 ml / 2 ml, Diameter: 10 mm

TR 1 Tube insert 24 x 5 ml. TR 2 Tube insert, Insert for IKA Trayster basic and Trayster digital. Suitable for plastic test tubes, 24 x 5 ml, Diameter: 12 mm

TR 3 Tube insert 12 x 15 ml. TR 3 Tube insert, Insert for IKA Trayster basic and Trayster digital. Suitable for Falcon/Greiner and centrifuge tubes, 12 x 15 ml, Diameter: 16 mm

TR 4 Tube insert 6 x 50 ml. TR 4 Tube insert, Insert for IKA Trayster basic and Trayster digital. Suitable for Falcon/Greiner and centrifuge tubes, 6 x 50 ml, Diameter: 28 mm

DS 1 Tube attachment, for IKA Loopster for 48 x 1.5 ml tubes with Diameter: 10 mm.

DS 2 Tube attachment, for IKA Loopster for 24 x 5 ml tubes with Diameter: 12 mm.

DS 3 Tube attachment, for IKA Loopster for 20 x 15 ml tubes with Diameter: 16 mm.

DS 4 Tube attachment, for IKA Loopster for 12 x 30 ml tubes with Diameter: 25 mm.

DS 5 Tube attachment, for IKA Loopster for 12 x 50 ml tubes with Diameter: 28 mm.

DS 6.1 Spare clips Diameter: 10mm, 12 Spare clips for IKA Loopsters with Diameter: 10 mm for the equipment of the Universal disc DS 6

Pad Sticky 15-3/4 X 19-1/2 In 300 Rpm. Sticky Pad, Dimensions: 15-3/4 x 19-1/2in (400 x 500mm), is an ideal alternative to flask clamps for securing vessels to a shaker platform, for use with containers with a flat wide base, With shake flasks the pad can

Flask Clamp Tray 48 Oz 25Ml for Shakers. Flask Clamp Tray, Flask clamps and universal platforms for shakers, Fits onto standard platforms. Purchase individual pieces to build various configurations, 25x25cm Tray Accepts 9, 51x51cm Tray Accepts 25, Volume: 25mL

Flask Clamp Tray 48 Oz 1 L for Shakers. Flask Clamp Tray, Flask clamps and universal platforms for shakers, Fits onto standard platforms. Purchase individual pieces to build various configurations, 25x25cm Tray Accepts 9, 51x51cm Tray Accepts 25, Volume: 1 L

Flask Clamp Tray 48 Oz 250Ml for Shakers. Flask Clamp Tray, Flask clamps and universal platforms for shakers, Fits onto standard platforms. Purchase individual pieces to build various configurations, 25x25cm Tray Accepts 9, 51x51cm Tray Accepts 25, Volume: 250 mL

Flask Clamp Tray 48 Oz 500Ml for Shakers. Flask Clamp Tray, Flask clamps and universal platforms for shakers, Fits onto standard platforms. Purchase individual pieces to build various configurations, 25x25cm Tray Accepts 9, 51x51cm Tray Accepts 25, Volume: 500 mL

Accessories for VWR® Mini Incubated Shaker, Universal platform, magnetic for incubated shaker Mini

Accessories for VWR® Mini Incubated Shaker, Universal platform, magnetic for incubated shaker and incubated and refrigerated shaker

Accessories for VWR® Mini Incubated Shaker, Clamp, magnetic for 1000 ml Erlenmeyer flask

Accessories for VWR® Mini Incubated Shaker, Clamp, magnetic for 125 ml Erlenmeyer flask

Accessories for VWR® Mini Incubated Shaker, Magnetic tube rack for 21×15 ml and 12×50 ml tubes

Accessories for VWR® Mini Incubated Shaker, Clamp, magnetic for 2000 ml Erlenmeyer flask

Accessories for VWR® Mini Incubated Shaker, Clamp, magnetic for 25 ml Erlenmeyer flask

Accessories for VWR® Mini Incubated Shaker, Clamp, magnetic for 250 ml Erlenmeyer flask

Accessories for VWR® Mini Incubated Shaker, Clamp, magnetic for 2.8 and 3 L flasks

Accessories for VWR® Mini Incubated Shaker, Clamp, magnetic for 50 ml Erlenmeyer flask

Accessories for VWR® Mini Incubated Shaker, Clamp, magnetic for 500 ml Erlenmeyer flask

Accessories for VWR® Mini Incubated Shaker, Clamp, magnetic for 1 microplate

Accessories for VWR® Mini Incubated Shaker, Tube-rack, magnetic for 72×14 mm culture tubes

Accessories for VWR® Mini Incubated Shaker, Tube-rack, magnetic for 32×15 ml tubes

Category