• 0
Shop Products $

Objective thermal isolator 27mm, A 9mm thick internally and externally threaded polymer ring, fitted with an AR window and enable a dry air trap to prevent condensation on cooled objectives. Fits 25mmx0.75mm objectives

Objective thermal spacer RMS, A 9mm thick internally and externally threaded polymer ring. It is recommended to add spacers to other objectives on the nosepiece for parfocality. RMS = 0.8inchx36tpi

Objective thermal spacer 25mm, A 9mm thick internally and externally threaded polymer ring. It is recommended to add spacers to other objectives on the nosepiece for parfocality. For 25mmx0.75 objectives

Objective thermal spacer 27mm, A 9mm thick internally and externally threaded polymer ring. It is recommended to add spacers to other objectives on the nosepiece for parfocality. For 27mmx0.75 objectives

Stage spacer kit, (4) 5mmx25mm allen bolts and (4) 9mm spacers used to raise the height of an inverted microscope stage 9mm

Objective cooling collar, A ring shaped attachment to an objective that provides an isolated pathway through which a refrigerated fluid can flow to provide an efficient means of cooling the objective.

Boekel warmer 115V, A non-humidified, 8inchx8inchx7inch heated enclosure for storing items to be warmed adjacent to a microscope. Operates on 120VAC, 20 watts.

Boekel warmer 230v, A non-humidified, 8inchx8inchx7inch heated enclosure for storing items to be warmed adjacent to a microscope. Operates on 230VAC, 20 watts.

Glass culture cylinder starter set, An assortment of borosilicate glass cylinders 5mm high having an optically flat polished end so that grease is not required used when plating cells to position them for observation and improve plating time, reusable and autoclavable.

Glass culture cylinder 1mmx5mm, A 1mmborosilicate glass cylinder 5mm high having an optically flat polished end so that grease is not required used when plating cells to position them for observation and improve plating time, reusable and autoclavable.

Glass culture cylinder 2mmx5mm, A 2mmborosilicate glass cylinder 5mm high having an optically flat polished end so that grease is not required used when plating cells to position them for observation and improve plating time, reusable and autoclavable.

Glass culture cylinder 4mmx5mm, A 4mmborosilicate glass cylinder 5mm high having an optically flat polished end so that grease is not required used when plating cells to position them for observation and improve plating time, reusable and autoclavable.

Glass culture cylinder 6mmx5mm, A 6mmborosilicate glass cylinder 5mm high having an optically flat polished end so that grease is not required used when plating cells to position them for observation and improve plating time, reusable and autoclavable.

Glass culture cylinder 8mmx5mm, A 8mmborosilicate glass cylinder 5mm high having an optically flat polished end so that grease is not required used when plating cells to position them for observation and improve plating time, reusable and autoclavable.

Glass culture cylinder 10mmx5mm, A 10mmborosilicate glass cylinder 5mm high having an optically flat polished end so that grease is not required used when plating cells to position them for observation and improve plating time, reusable and autoclavable.

Glass culture cylinder 12mmx5mm, A 12mmborosilicate glass cylinder 5mm high having an optically flat polished end so that grease is not required used when plating cells to position them for observation and improve plating time, reusable and autoclavable.

Glass culture cylinder 14mmx5mm, A 14mmborosilicate glass cylinder 5mm high having an optically flat polished end so that grease is not required used when plating cells to position them for observation and improve plating time, reusable and autoclavable.

Stable Z starter set, A device designed to warm biological specimens in standard plastic ware on a microscope stage with the distinct advantage of eliminating Zaxis drift. Set includes; controller, power supply, and specified stage adapter.

Stable Z controller, An electronic closed loop temperature controller for Stable Z stages.

Adapter. Stable Z nikon stage adapter, A glass 108mm round plate having an electronically heated metal plate in its center that fits a Nikon microscope stage where biological specimens are placed for observation and having the ability to not induce Z axis drift to the specimen.

Adapter. Stable Z olympus stage adapter, A glass 110mm round plate having an electronically heated metal plate in its center that fits an Olympus microscope stage where biological specimens are placed for observation and having the ability to not induce Z axis drift to the specimen

Adapter. Stable Z SBS stage adapter, A 127.76mmx85.48mm glass plate having an electronically heated metal plate in its center that accepts 35mm dishes and fits microscope stages adapted to hold 96 well SLAS/SBS plates that does not induce Z axis drift to the specimen

Stable Z heated lid and controller, Used with a Stable Zsystem to prevent condensation and provide a more uniform temperature gradient across the dish of the Stable inchZinch. Includes Lid Controller and Power supply

Adapter. Stable lab-tek warming adapter, A 127.76mmx85.48mm glass plate having an electronically heated metal plate in its center that accepts Lab-Tek chamber slides and fits microscope stages adapted for 96 well SLAS/SBS plates that does not induce Z axis drift to the specimen plane

EDU starter set, A simplified version of the Delta T system to facilitate demonstrations of live cellular events in a classroom setting.

Adapter. Leica Galvanic Adapter (Round), reads the temperature of the Delta T Dishes, provides electrical contacts to power the dishes and supports the dish on the stage for translation.

Adapter. Leica Galvanic Rectangular Adapter, reads the temperature of the Delta T Dishes, provides electrical contacts to power the dishes and supports the dish on the stage for translation.

Delta T Culture Dish, 0.5mm thick (clear), 35mm diameter, 0.5mm Desag 263 German glass coverslip bottomed, optically transparent coating on the bottom surface of the dish.

Delta T Culture Dish, 0.5mm thick (black), 35mm diameter, 0.5mm Desag 263 German glass coverslip bottomed, optically transparent coating on the bottom surface of the dish.

Micro-Perfusion Pump Rod Mounting Clamp, polymer screw-on clamping bracket to support the Micro-Perfusion Pump onto conventional 1/2inch breadboard support post.

Oasis heating and cooling system, A Peltier driven heating and cooling system that circulates temperature regulated fluid through accessory devices used on a microscope.

Adapter. FCS3 universal upright stage adapter, A black anodized aluminum plate containing a circuit board and electrical connectors that accepts the FCS3 and interfaces thextranslator bar of upright microscope stages

Adapter. FCS3 marzhauser scan stage adapter, A black anodized aluminum plate containing a circuit board and electrical connectors that accepts the FCS3 and interfaces Marzhauser scan 100x80 (160mm x116mm) stages.

Adapter. Zeiss (K), Marzhauser, ASI, Ludl and Prior Adapter, A black anodized aluminum plate containing a circuit board and electrical connectors that accepts the FCS3 and interfaces Marzhauser and Zeiss K stages on upright microscopes.

FCS3 spanner wrench, A knurled aluminum disk having pins inserted to interface the FCS3 chamber to assist in easy assembly

Objective heater, medium, A small cube shaped device containing a heating band, fastening loop and thermal sensor that is attached to a microscope objective to prevent heat loss from the specimen when using high numeric aperture lenses. Includes cord and plug.

Objective heater large, A small cube shaped device containing a heating band, fastening loop and thermal sensor that is attached to a microscope objective to prevent heat loss from the specimen. Includes cord and plug. Requires Controller Fits 30-37 mm objectives.

Objective wrench and plier set, A tool used to isolate the mechanical stress applied to an objective when removing the decorative collar to enable the attachment of an objective heater.

Objective thermal isolator RMS, A 9mm thick internally and externally threaded polymer ring includes an AR window to enable a dry air trap to prevent condensation on cooled objectives. For RMS, 0.8inchx36tpi

Delta T Open Dish System, Easily adapted to specimen, Low mass to thermo-regulate, incubate and observe without the need to transfer cellsFast thermal recovery after perfusion (within seconds), Compatible with inverted and upright microscope stands

Delta T Culture Dish Controller, Easily adapted to specimen, Low mass to thermo-regulate, incubate and observe without the need to transfer cellsFast thermal recovery after perfusion (within seconds)Compatible with inverted and upright microscope stands

Controller power supply. EDU Power Suppy, wall socket mounted power supply that converts 50 - 60 Hz 90 - 240VAC to 12VCD to power Bioptechs Controllers.

Epi-fluorescence attachment for Motic BA410E (Elite) series accommodates three filter cassettes for excitation observation, attachment with filter cassette, mercury lamp 100W, lamphouse HBO 100W, collector lens and mercury lamp socket, lamp centering tool

Epi-fluorescence attachment for Motic AE31E (Elite) series accommodates three filter cassettes for excitation observation, attachment with filter cassette, mercury lamp 100W, lamphouse HBO 100W, collector lens and mercury lamp socket, lamp centering tool

Widefield eyepiece WF 15X / F.N. 16mm, SMZ161 series.

Widefield eyepiece WF 20X / F.N. 13mm, SMZ161 series.

Camera adapter 0.5X C-Mount for 1/3 and 1/2 inch chip sensors, SMZ/BA series.

Camera adapter 0.65X C-Mount for 2/3 inch chip sensors, SMZ/BA series.

Camera adapter 1x C-Mount (no lens), SMZ161 series.

Widefield eyepiece Adjustable N-WF 10X / F.N. 23mm (ESD) with diopter adjustment, SMZ171 series.

Widefield eyepiece Adjustable N-WF 15X / F.N. 16mm (ESD) with diopter adjustment, SMZ171 series.

Widefield eyepiece N-WF 20X / F.N. 13mm (ESD), SMZ171 series.

Micrometer Eyepieces (Per Piece) 360 deg Protractor, 30 deg increments, WF10X/F.N. 23, SMZ171.

Micrometer Eyepiece (per piece) graduated linear line point = 0.1mm/10mm (WF10X/F.N. 23), SMZ171.

Micrometer Eyepiece (per Piece) Graduated Linear Line & Plain Cross Hair point = 0.1mm/10mm (WF10X/F.N. 23), SMZ171

Micrometer Eyepieces (per piece) Graduated Linear line & double cross hair point = 0.1mm/10mm(WF20X/F.N. 13), SMZ171

Metallurgical Microscope. Metallurgical microscope, microscope, with Siedentopf trinocular head 30 degree inclined, Light Split 20/80, 360 degree , Interpupillary distance 55-75mm, Widefield diopter adjusted eyepieces 10X/20mm, 12V/50W halogen Epi-illumination, 100-240V, BA310MET(TRIN)

Polarization Microscope. Polarization microscope with Binocular head Siedentopf 30 degree inclined, Widefield eyepieces 10X/20mm, IntermediateTube with Rotatable Analyzer and Bertrand Lens, Reversed nosepiece, CCIS Plan Strain-free Objectives:4X, 10X, 40X(S), 60X(S), BA310POL (BINO)

Polarization Microscope. Polarization microscope with Trinocular head Siedentopf 30 degree inclined, widefield eyepieces 10X/20mm, IntermediateTube with Rotatable Analyzer and Bertrand Lens, Reversed nosepiece, CCIS Plan Strain-free Objectives:4X, 10X, 40X(S), 60X(S), BA310POL (Light Split 20/80)

VIKEM VINYL MICROSCOPE COVER. BAG TYPE, 13X9X16-1/2. Custom sizes are available on request.

VIKEM VINYL MICROSCOPE COVER, BAG TYPE, 16X11X18. Custom sizes are available on request.

VIKEM VINYL MICROSCOPE COVER, BAG TYPE, 19X15X22. Custom sizes are available on request.

1/4 B STL FBR RNDMZD 24 - BR424

1/4 B STL FBR RNDMZD 36 - BR436

1/4 B STL FBR RNDMZD 48 - BR448

1/4 B STL FBR RNDMZD 72 - BR472

Widefield Eyepiece. 10x, 20mm eyepiece for the All-In-One Digital Microscope (19000-026).

Achromatic Super Contrast objective ASC 4x/.010. for Motic Upright B1, B2 Compound or DMWB1 Digital Compound.

Achromatic Super Contrast objective ASC 10x/0.25. for Motic Upright B1, B2 Compound or DMWB1 Digital Compound.

Achromatic Super Contrast objective ASC 40x/0.65/s. for Motic Upright B1, B2 Compound or DMWB1 Digital Compound.

Widefield Eyepiece. 15x, 20mm eyepiece for the All-In-One Digital Microscope (19000-026).

C-mount camera adapter with 1/2in chip sensors 0.5x. for Motic Upright Compound B1, B2 microscope .

1.5x Auxiliary Objective. For K-400/K-500 Series Stereo Microscopes (19000-200, -202, -204, -206).

Left Arm rest . for Motic Compound BA series microscopes.

Right Arm rest . for Motic Compound BA series microscopes.

Halogen Lamp 6V/ 30W replacement bulb. for Motic Upright Compound BA300 and BA400 microscopes.

12V/15W Halogen Replacement bulb. for incident illumination (N2GG) for Motic Stereomicroscopes SMZ140, SMZ143 and SFC.

Halogen Bulb. (Ddl) Replacement 150W Halogen Bulb. For Fiber-Lite Ringlight Systems 3000-1 And 3200-1, And Fiber-Lite Illumination Systems 3001-1 And 3201-1.

Halogen Bulb. (Eke) Replacement 150W Halogen Bulb. For The Fiber-Lite Ringlight System 360-1, And Illumination Systems 177-1 And 181-1.

Halogen Bulb. (Ekz) Replacement 30W Halogen Bulb. For Fiber-Lite 190-1 And 3100-1 Illumination Systems, And 3100-A37P Ringlight System.

Light Guide, Dual Self-Support. Accessory for Fiber-Lite Illumination Systems.

21V, 150W Bulb For 170D Or 180 Models. (Ejv) Accessory For Fiber-Lite Illumination Systems.

Focusing Lenses. Accessory for Fiber-Lite Illumination Systems.

Adapter for Gooseneck Fiber Optic. Accessory for Fiber-Lite Illumination Systems.

Ringlight Fiber Optic Adapter. Accessory for Fiber-Lite Illumination Systems.

Model MI-150 Microscopy Illuminator. 150W quartz halogen illuminator with nearly 400,000 foot-candles of high-intensity illumination. Minimal vibration, noise, light leakage. Sleek plastic housing, 0-100% solid state intensity control. 110/120 or 220/230V, 50/60Hz. 22.2Lx15.24Wx14Hcm. UL/CE/CSA.

ILLUMINATOR,IR FLTER+HLDR 115V - MI-150F

Model MI-150SG Microscopy Illuminator. Model MI-150 150W quartz halogen illuminator with BG2820 single gooseneck self-supporting cable and one LH-759 lens. Minimal vibration, noise, light leakage. 0-100% solid state intensity control. 110/120 or 220/230V, 50/60Hz. 22.2Lx15.24Wx14Hcm. UL/CE/CSA.

Model MI-150DG Microscopy Illuminator. Model MI-150 150W quartz halogen illuminator with EEG2823 dual gooseneck self-supporting cable and two LH-759 lenses. Minimal vibration, noise, light leakage. 0-100% solid state intensity control. 110/120 or 220/230V, 50/60Hz. 22.2Lx15.24Wx14Hcm. UL/CE/CSA.

ILLUMINATOR W/BNDL+D-GSNK 115V - MI-150DGF

ILLUMINATOR 150W HALOGEN 220V - MI-1501

ILLUMINATOR,W/IR FLT+HLDR,220V - MI-1501F

ILLUMINATOR W/FLTR+GSNK 220V - MI-150SG1

ILLUMINATOR W/BNDL+D-GSNK 220V - MI-150DG1

ILLUMINATOR W/BNDL+GSNK 220V - MI-150SG1F

ILLUMINATOR W/BNDL+D-GSNK 220V - MI-150DG1F

SINGLE GOOSENECK F/MI-150ILLUM - BG2820

Dual Gooseneck. 58.4cm. Self-supporting dual gooseneck for MI-150 Microscopy Illuminator (37000-564).

Boreal2 Microscopes, EM Series - SK52, Coarse focus primary microscope

Boreal2 Microscopes, HM Series - SK102, Monocular

Category