• 0
Shop Products $

Support Stand with Center Rod. Polyethylene support stand with a center rod withstands the most severe corrosive conditions. The base has a smooth surface for easy cleaning. Stand includes a 12.7x762mm rod which screws into the base. Base is 2.5kg for greater stability.

SiteSelect Stationary Shelf Post, Stainless Steel. For use with Super Erecta and Super Erecta Super Adjustable wire shelving systems. Circular grooves at 2.5cm intervals, a double groove every 20.3cm, numbers at 5.1cm intervals. Height: 189.6cm. Height includes leveling bolt and cap.

Super Erecta Wire Shelving, Stainless Steel. Type 304 stainless steel provides maximum protection in corrosive environments. Super Erecta shelves allow for easy adjustment when used with SiteSelect posts. Dimensions: 53.3Wx76.2Lcm. Shipping weight: 4.1kg.

VWR Talon Two-Prong Medium Clamp. Dual adjustment clamp has a jaw size of 12.7mm to 64.8mm. Two-prong design is ideal for beakers, flasks, and test tubes. Jaws adjust independently. Overall length is 225mm. Clamp extends 127mm. Supplied with fiberglass finger covers.

VWR Talon Three-Prong Small Extension Clamp. Dual adjustment clamp has a maximum grip size of 36mm. Three-jaw configuration holds irregular shapes easily. Overall length is 167mm. Clamp extends 102mm. Supplied with fiberglass finger covers.

VWR Talon Three-Prong Medium Extension Clamp. Dual adjustment clamp has a maximum grip size of 58mm. Three-jaw configuration holds irregular shapes easily. Overall length is 229mm. Clamp extends 127mm. Supplied with fiberglass finger covers.

VWR Talon Three-Prong Large Extension Clamp. Dual adjustment clamp has a maximum grip size of 93mm. Three-jaw configuration holds irregular shapes easily. Overall length is 270mm. Clamp extends 127mm. Supplied with fiberglass finger covers.

Bunsen Round Jaw Extension Clamp. Clamps are made of heavy-gauge stamped steel and have plastisol-coated jaws. Jaw opening: 10 to 35mm. Length: 203mm.

Universal Swivel Jaw Extension Clamp. Stamped steel clamp features plastisol-covered upper and lower swivel jaws. Lower jaw permits orientation at any angle. Maximum jaw opening is 51mm. Overall length is 222mm. Forged steel handle: 10mm diameter. Shipping weight: 12.7kg.

Universal Swivel Jaw Extension Clamp. Stamped steel clamp features plastisol-covered upper and lower swivel jaws. Lower jaw permits orientation at any angle. Maximum jaw opening is 76mm. Overall length is 254mm. Forged steel handle: 10mm diameter. Shipping weight: 12.7kg.

VWR Talon Nester Extension Clamp. Stainless steel clamp holds 38-102mm diameter glass distillation columns and odd-shaped glassware. Extension arm is 152mm long. With chromed-brass band and chain.

VWR Talon Column Clamp. Easily adjusted clamps are ideal for large cylindrical, 140-165mm diameter glassware and similar objects. Extension arm is 180mm.

VWR Talon Regular Clamp Holder. Clamp holder made out of nickel plated zinc has a maximum grip size of 19mm and allows versatile useage wherever clamping at 90 degree angle is required.

VWR Talon Heavy-Duty Clamp Holder. Jumbo clamp holder has a maximum grip size of 19mm. Heavy duty version of the regular holder is for use wherever clamping at 90[degree] angle is required. Doubles as a shelf support to hold flat panels or shelves up to 19mm thick.

VWR Talon Swivel Holder. Two Q-clamp post holders with center swivel capacity allow tilting of clamp at any angle in parallel planes. Maximum rod grip size is 19mm.

VWR Talon All-Position Clamp Holder. Clamp holder has a maximum rod grip size of 19mm. Permits adjustment at any angle, in any plane. Holders are set at 90 degrees to each other connected by a 90 degree connector, allowing 360 degree rotation.

VWR 3 Prong Large Dual Adjustment Clamp Head Only.

VWR Q Clamp Holder. For Securing Clamps To A Rod.

VWR Talon Large Chain Clamp. Clamp holds objects from 38.1mm to 279mm in diameter or irregularly shaped objects. Quick and secure slip-on chain connection with large, easy to turn adjusting knob holds objects at any angle. Arm extends 136mm. 36-inch chain.

VWR Talon II Three-Prong Medium Clamp. Dual adjustment clamp has a jaw size of 57mm. Yoke construction minimizes contamination and corrosion of internal components. Three-jaw configuration holds irregular shapes easily. Overall length is 226mm. Clamp extends 127mm.

VWR Talon II Three-Prong Medium Clamp. Single adjustment clamp has a jaw size of 43mm. Yoke construction minimizes contamination and corrosion of internal components. Three-jaw configuration holds irregular shapes easily. Overall length is 206mm. Clamp extends 127mm.

VWR Talon II Three-Prong Small Clamp. Single adjustment clamp has a jaw size of 18mm. Yoke construction minimizes contamination and corrosion of internal components. Three-jaw configuration holds irregular shapes easily. Overall length is 166mm. Clamp extends 102mm.

VWR Fiberglass Replacement Sleeves. For Medium 2 Prong Clamps Pack Of 2.

VWR Fiberglass Replacement Sleeves. For Small 3 Prong Clamps Pack Of 3.

VWR Fiberglass Replacement Sleeves. For Medium 3 Prong Clamps Pack Of 3.

VWR Vinyl Replacement Sleeves. For Large 3 Prong Clamps Pack Of 3.

VWR Talon Thermometer Extension Clamp. Clamp holds 6.4 to 12.7mm diameter glass tubing/thermometers up to 178mm from the support rod. Knurled thumbscrew tightens jaws to hold objects firmly. Overall length is 210mm. A 90 degree clamp holder is required for attachment to rods.

VWR Talon Small Water Bath Clamp. Two-prong. Holds a variety of apparatus, including glass tubes and thermometers, on glass water bath walls of varying thickness of 0.5-0.9cm. Knurled thumbscrew tightens jaws to hold object firmly. Grip size: 6.4-12.7mm. Overall length: 93mm.

Clamp, Overall length 10 cm, Nickel Plated Zinc. Suspension Clamp, Talon,VWR. Holds thermometers, potash bulbs, drying tubes and other apparatus. Designed with an integral holder.

VWR Clamp. For Securing Fermentation Tubes, Burets, Or Other Small Objects To Walls Where Frames Are Not Available. Integral Self-Tapping Screw Secures Clamp To Wall. Nickel Plated Construction. Overall Length 80Mm(3.15In).

VWR Talon Single Buret Clamp. Single adjustment clamp has a jaw size of 57mm and a 3-prong jaw. Clamp has a fixed angle for precise vertical alignment of burets, thermometers, and reflux condensers. Supplied with fiberglass finger covers.

VWR Talon Single Buret Clamp. Single adjustment clamp has a jaw size from 12.7mm to 64.8mm and a flat, two-prong jaw. Clamp has a fixed angle for precise vertical alignment of burets, thermometers, and reflux condensers. Supplied with fiberglass finger covers.

VWR Talon Small Chain Clamp. Clamp holds objects from 38.1mm to 165mm in diameter or irregularly shaped objects. Quick and secure slip-on chain connection with large, easy to turn adjusting knob holds objects at any angle. Arm extends 136mm.

VWR Talon Two-Prong Large Swivel Clamp. Single adjustment clamp. Jaw size: 19mm to 77mm. Two-prong design ideal for beakers, flasks, and test tubes. Shaft wing nut allows 360-degree rotation. Clamp extends 138mm. Q-clamp post holders grip rods up to 19mm. Supplied with fiberglass finger covers.

Clamp, Overall length 23.5 cm, Nickel Plated Zinc. Double Jaw Utility Clamp, Two Prong Style, Talon, VWR. Holds two objects with care. One end has maximum grip size of 8.2 cm and the other end is 6.8 cm. The clamps swivel 360 degrees in one plane, locking securely in the desired position.

CLAMP CYLINDER - H-8280

VWR Talon Regular Hosecock Clamp. Hosecock clamp delivers precise flow control without sharp edges that can cut into tubing. Tubing retainer screw, located on side of clamp, allows easy positioning of tube. Maximum tubing size: 19mm.

Standard Ties. Diameter: 19mm. Length: 10.2cm. For use with tubing.

CLAMP STAINLESS STEEL SZ6 PK10 - 200-06W

CLAMP STAINLSS STEEL SZ10 PK10 - 200-10W

CLAMP STNLESS STEEL SZ16 PK10 - 200-16W

CLAMP WORM DRIVE M4H PK10 - 6504

CLAMP MINI 7/16 PK10 SS - 3604

CLAMP MINI 3/4 SS PK10 - 3606

CLAMP POWERSEAL 3/4 PK10 SS - 64006

CLAMP POWERSEAL1 1/16 PK10 SS - 64010

CLAMP POWERSEAL 11/4INPK10 SS - 64012

CLAMP POWERSEAL 11/2IN PK10 SS - 64016

CLAMP POWERSEAL 13/4IN PK10 SS - 64020

Category