• 0
Shop Products $

Clamp Holder. Nickel-plated zinc alloy. High tensile strength. Corrosion resistant. Useful wherever clamping at 90[degree] angle is required. Large thumb screws allow easy adjusting. Maximum rod grip size is 3/4 (19mm).

CLAMP HOLDER, LARGE. Heavy duty holder features greater grip strength and the ability to hold flat panels or shelves up to 3/4in. (19mm) thick. Large thumb screws allow easy adjusting. Maximum grip size is 3/4in. (19mm).

SWIVEL HOLDER. Two clamp holders with a center swivel to allow tilting of clamp at any angle in parallel planes. Outside adjustment screw permits close proximity between items beig held. Maximum grip size is 3/4in. (19mm).

CLAMP HOLDER, ALL POSITION. Double swivel design allows clamp holder to adjust at any angle in any plane. Holders are 90[degree] to each other, joined by a right angle connector, allowing 360[degree] rotation. Outside adjustment screws permit close proximity between items being held.

LATTICE CONNECTOR. Angled adjustment screws allow easy set-up and prevents slippage or misalignment. Two U-shaped slots permit rods or clamps of 1/2in. (13mm) maximum diameter to be joined in a 90[degree] corner joint or cross-connection with components in close proximity to minimize wasted space.

HOOK CONNECTOR. Easy-to-use connector allows one-handed assembly of two components with one adjustment screw. Maximum diameter of 1/2in. (13mm) for each component.

S CONNECTOR. Similar to the CG-9260-01 lattice connector, the 'S' connector features ergonomic contouring for easy adjustment with angled set screws for maximum grip against rods or clamps.

MULTI-GRIP CONNECTOR. Total adjustment capability within one connector. Permits lattice adjusting after construction. Holds rods at 90[degree] while allowing horizontal and vertical adjustment. Side and front holes accommodate a variety of configurations. Accepts rod size 1/2in. (13mm).

LAB FRAME FOOT. Permanent lattice mounting to bench tops, floors or walls. Accommodates 1/2in. (13mm) diameter rod. Supplied with three screws.

CLAMP, HORSESHOE STYLE. For Flange Size: 32mm. Horseshoe shaped clamp used to connect CG-138 flat o-ring flange. Design allows clamp to be installed or removed easily. Made of cast aluminum with chemically resistant blue epoxy coating.

CLAMP, HORSESHOE STYLE. For Flange Size: 57mm. Horseshoe shaped clamp used to connect CG-138 flat o-ring flange. Design allows clamp to be installed or removed easily. Made of cast aluminum with chemically resistant blue epoxy coating.

CLAMP, HORSESHOE STYLE. For Flange Size: 80mm. Horseshoe shaped clamp used to connect CG-138 flat o-ring flange. Design allows clamp to be installed or removed easily. Made of cast aluminum with chemically resistant blue epoxy coating.

CLAMP, HORSESHOE STYLE. For Flange Size: 4.5in. Horseshoe shaped clamp used to connect CG-138 flat o-ring flange. Design allows clamp to be installed or removed easily. Made of cast aluminum with chemically resistant blue epoxy coating.

CLAMP, HORSESHOE STYLE. For Flange Size: 5.5in. Horseshoe shaped clamp used to connect CG-138 flat o-ring flange. Design allows clamp to be installed or removed easily. Made of cast aluminum with chemically resistant blue epoxy coating.

CLAMP, PINCH, STAINLESS STEEL, SPHERICAL. Size: 12. Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.

CLAMP, PINCH, STAINLESS STEEL, SPHERICAL. Size: 12-L. Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.

CLAMP, PINCH, STAINLESS STEEL, SPHERICAL. Size: 18. Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.

CLAMP, PINCH, STAINLESS STEEL, SPHERICAL. Size: 18-L. Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.

SPHERICAL CLAMP, STAINLESS STEEL. Fits Joint Size: 35/20. Clamp is used in the assembly of CG-1198 through CG-1201 chromatography column components having spherical joints. Made entirely of stainless steel with locking screw.

SPHERICAL CLAMP, STAINLESS STEEL. Fits Joint Size: 50/30. Clamp is used in the assembly of CG-1198 through CG-1201 chromatography column components having spherical joints. Made entirely of stainless steel with locking screw.

CLAMP, PINCH, STAINLESS STEEL, SPHERICAL. Size: 65. Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.

SPHERICAL CLAMP, STAINLESS STEEL. Fits Joint Size: 75/50. Clamp is used in the assembly of CG-1198 through CG-1201 chromatography column components having spherical joints. Made entirely of stainless steel with locking screw.

CLAMP, SPHERICAL JOINT, HORSESHOE STYLE. For Joint Size: 12. Horseshoe shape corrosion-resistant steel clamp for use with spherical ball and socket joints. Clamp has two machine bolts and thumbscrews 180[degree] apart to apply uniform tension.

CLAMP, SPHERICAL JOINT, HORSESHOE STYLE. For Joint Size: 18. Horseshoe shape corrosion-resistant steel clamp for use with spherical ball and socket joints. Clamp has two machine bolts and thumbscrews 180[degree] apart to apply uniform tension.

CLAMP, SPHERICAL JOINT, HORSESHOE STYLE. For Joint Size: 28. Horseshoe shape corrosion-resistant steel clamp for use with spherical ball and socket joints. Clamp has two machine bolts and thumbscrews 180[degree] apart to apply uniform tension.

CLAMP, SPHERICAL JOINT, HORSESHOE STYLE. For Joint Size: 35. Horseshoe shape corrosion-resistant steel clamp for use with spherical ball and socket joints. Clamp has two machine bolts and thumbscrews 180[degree] apart to apply uniform tension.

CLAMP, SPHERICAL JOINT, HORSESHOE STYLE. For Joint Size: 40. Horseshoe shape corrosion-resistant steel clamp for use with spherical ball and socket joints. Clamp has two machine bolts and thumbscrews 180[degree] apart to apply uniform tension.

CLAMP, SPHERICAL JOINT, HORSESHOE STYLE. For Joint Size: 65. Horseshoe shape corrosion-resistant steel clamp for use with spherical ball and socket joints. Clamp has two machine bolts and thumbscrews 180[degree] apart to apply uniform tension.

CLAMP, SPHERICAL JOINT, HORSESHOE STYLE. For Joint Size: 75. Horseshoe shape corrosion-resistant steel clamp for use with spherical ball and socket joints. Clamp has two machine bolts and thumbscrews 180[degree] apart to apply uniform tension.

Stainless Steel Tube Rack. Holds 24 tubes. Maximum tube diameter: 1.7cm. 2x12 configuration.

Stainless Steel Tube Rack. Holds 48 tubes. Maximum tube diameter: 1.7cm. 4x12 configuration.

Stainless Steel Z-Style Tube Rack. Holds 50 tubes. Maximum tube diameter: 1.3cm. 10x5 configuration.

Stainless Steel Z-Style Tube Rack. Holds 50 tubes. Maximum tube diameter: 1.7cm. 10x5 configuration.

Stainless Steel Z-Style Tube Rack. Holds 25 tubes. Maximum tube diameter: 1.3cm. 5x5 configuration.

Stainless Steel Z-Style Tube Rack. Holds 25 tubes. Maximum tube diameter: 1.7cm. 5x5 configuration.

10-Lock Board (Board Only). plus tags and hasps. Acrylic.

Eyewash Stand Cs1

Beaker Stand. This unique stand was designed specifically to fit the WLS13255 burner. Its compact size and exact fit, provides a very stable and safe operation.

Clamp for Duran Reaction Flanges and Lids. 80mm,PTFE Coated

Standard Taper Joint Clamp PTFE. 14/20, Made entirely of PTFE, these clamps can withstand temperatures up to 250 degC and are totally chemically resistant and inert.

Standard Taper Joint Clamp PTFE. 19/22, Made entirely of PTFE, these clamps can withstand temperatures up to 250 degC and are totally chemically resistant and inert.

Standard Taper Joint Clamp PTFE. 24/40,Made entirely of PTFE, these clamps can withstand temperatures up to 250 degC and are totally chemically resistant and inert.

Standard Taper Joint Clamp PTFE. 29/26-29/42, Made entirely of PTFE, these clamps can withstand temperatures up to 250 degC and are totally chemically resistant and inert.

Standard Taper Joint Clamp PTFE. 34/45, Made entirely of PTFE, these clamps can withstand temperatures up to 250 degC and are totally chemically resistant and inert.

Standard Taper Joint Clamp PTFE. 45/50 Made entirely of PTFE, these clamps can withstand temperatures up to 250 degC and are totally chemically resistant and inert.

Reactor Support Frame. 10L-20L, 19 in W x 19 in D x 63.25 in H, 15.3 in Valve Clearance. Design allows greater access to the reactor and peripheral glassware. Motor mount arm can be used with either electric or air motors.Can be used for 10, 15, and 20L Jacketed or Unjacketed reactor systems.

Reactor Support Frame. Mobile, Jacketed Or Unjacketed, 30L with 13.8in Valve Clearance OR 50L (Short) with 10.5in Valve Clearance. 28.25inW x 20inD x 66.50inH. Motor mount arm can be used with either electric, air, or XP motors and can swing out of the way for greater access to reactor.

Reactor Support Frame. Mobile, Jacketed Or Unjacketed, 30L with 18.6in Valve Clearance OR 50L (Short) with 15.2in Valve Clearance. 28.25inW x 20inD x 75.25inH Motor mount arm can be used with either electric, air, or XP motors and can swing out of the way for greater access to reactor.

Reactor Support Frame, Mobile. Jacketed Or Unjacketed, 50L (Tall) with 16.2in Valve Clearance, 28.25in W x 20in D x 83.50in H. Motor mount arm can be used with either electric, air, or XP motors and can swing out of the way for greater access to reactor.

Lattice Support Shelf. 9in x 10in Shelf can be attached to any lattice setup using the supplied clamp holder.Anodized green with a neoprene surface to prevent items from slipping off. Square support rod prevents shelf from rotating once it is attached to the lattice (7.5in L)

Viton O-Ring #201. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Removable 8x8in Extension Plate. For Support Jack CG-3052-01

Vertical Support Rod. 1/2in OD x 18in Long Support Rod for CG-3052-01

Flexible Clamp, Complete 12in.. For use in clamping laboratory apparatus that are normally difficult to hold due to their size, shape or odd angles. Unique flexible arm can be placed in virtually any position or angle.

Flexible Clamp, Complete 18in. For use in clamping laboratory apparatus that are normally difficult to hold due to their size, shape or odd angles. Unique flexible arm can be placed in virtually any position or angle.

Bench Clamp. For CG-9214-01 or CG-9214-02

Clamp, 3-Prong Replacement. Holds items to 58mm dia for CG-9214-01 or CG-9214-02

Flexible Arm, 18in. For CG-9214-01 or CG-9214-02

Lab Frame Connector. For CG-9214-01 or CG-9214-02

Accessories for Gas Scrubber, Chemglass - CG-1949-100, Benchtop Support Stand

6468 Clamp, Two-Piece, Reaction. TWO-PIECE CLAMP JOINS HEAD TO FLASK ON 6469 PORTABLE REACTOR ASSEMBLIES.

6517 CLAMP, Quick Release. 2 QUICK CLAMP WITHOUT EXTRACTION.

6517 CLAMP, Quick Release. 120MM QUICK CLAMP WITHOUT EXTRACTION.

6517 CLAMP, Quick Release. 4 QUICK CLAMP WITHOUT EXTENSION.

6517 CLAMP, Quick Release. 8 QUICK CLAMP WITHOUT EXTRACTION.

6517 CLAMP, Quick Release. 8 QUICK CLAMP W/EXT 5/8DIAx12LONG ROD.

7598 CLAMPS, Plastic. 10/18 DELRIN JOINT CLIPS SUPPLIED IN SHELF-PACKS OF 10 EACH. CAN BE USED TO 140 DEGREES CENTIGRADE. NOT FOR PRESSURE USE.

7598 CLAMPS, Plastic. 12/30 DELRIN JOINT CLIPS SUPPLIED IN SHELF-PACKS OF 10 EACH. CAN BE USED TO 140 DEGREES CENTIGRADE. NOT FOR PRESSURE USE.

7598 CLAMPS, Plastic. 19/22 DELRIN JOINT CLIPS SUPPLIED IN SHELF-PACKS OF 10 EACH. CAN BE USED TO 140 DEGREES CENTIGRADE. NOT FOR PRESSURE USE.

7598 CLAMPS, Plastic. 29/42 DELRIN JOINT CLIPS SUPPLIED IN SHELF-PACKS OF 10 EACH. CAN BE USED TO 140 DEGREES CENTIGRADE. NOT FOR PRESSURE USE.

7598 CLAMPS, Plastic. 34/45 DELRIN JOINT CLIPS SUPPLIED IN SHELF-PACKS OF 10 EACH. CAN BE USED TO 140 DEGREES CENTIGRADE. NOT FOR PRESSURE USE.

7598 CLAMPS, Plastic. 40/35 DELRIN JOINT CLIPS SUPPLIED IN SHELF-PACKS OF 10 EACH. CAN BE USED TO 140 DEGREES CENTIGRADE. NOT FOR PRESSURE USE.

7598 CLAMPS, Plastic. 45/50 DELRIN JOINT CLIPS SUPPLIED IN SHELF-PACKS OF 10 EACH. CAN BE USED TO 140 DEGREES CENTIGRADE. NOT FOR PRESSURE USE.

7599 CLAMPS, Metal, Silicone Coated. PK/6 14/20 SIL/MET CLAMP.

7599 CLAMPS, Metal, Silicone Coated. PK/6 24/40 SIL/MET CLAMP.

Stainless Steel Clamps, Ace Glass - 7600-05, Stainless Spring Wire Joint Clamp

Stainless Steel Clamps, Ace Glass - 7600-10, Stainless Spring Wire Joint Clamp

Stainless Steel Clamps, Ace Glass - 7600-15, Stainless Spring Wire Joint Clamp

Stainless Steel Clamps, Ace Glass - 7600-20, Stainless Spring Wire Joint Clamp

Stainless Steel Clamps, Ace Glass - 7600-25, Stainless Spring Wire Joint Clamp

Stainless Steel Clamps, Ace Glass - 7600-30, Stainless Spring Wire Joint Clamp

7600 CLAMPS, Stainless Steel. PK6 34/45 STAINLESS STEEL CLAMPS.

Stainless Steel Clamps, Ace Glass - 7600-40, Stainless Spring Wire Joint Clamp

7669 CLAMPS, Pinch Type, Stainless Steel. 18/9 SS SCREWLOCK PINCH CLAMP.

7669 CLAMPS, Pinch Type, Stainless Steel. 28/15 SS SCREWLOCK PINCH CLAMP.

7669 CLAMPS, Pinch Type, Stainless Steel. 35/25 SS SCREWLOCK PINCH CLAMP.

7669 CLAMPS, Pinch Type, Stainless Steel. 65/40 SS SCREWLOCK PINCH CLAMP.

7669 CLAMPS, Pinch Type, Stainless Steel. 18/9 SS SPRING-LOADED PINCH CLAMP.

11056 SUPPORT STAND for Big Columns. LARGE COLUMN STAND SET, UP TO #50 THREAD.

11056 SUPPORT STAND for Big Columns. LARGE COLUMN STAND SET, UP TO #80 THREAD.

11082 CLAMP, Power Hold - Arrow. POWER HOLD CLAMP COMPLETE.

11084 CLAMP, Universal Swivel, Power Hold - Arrow. CLAMP,UNIVERSAL SWIVEL.

11148 HOSE CLAMPS, Stainless Steel, PIAB. 10-14MM DIAMETER STAINLESS STEEL HOSE CLAMP.

11148 HOSE CLAMPS, Stainless Steel, PIAB. 12-16MM DIAMETER STAINLESS STEEL HOSE CLAMP.

11148 HOSE CLAMPS, Stainless Steel, PIAB. 17-22MM DIAMETER STAINLESS STEEL HOSE CLAMP.

11150 POWERSTAT MOUNTING BRACKET. 16MM POWERSTAT BRACKET REV.10/95 WAS 14MM.

11178 SUPPORT RODS, Stainless Steel. STAINLESS STEEL SUPPORT ROD 31CM 12.

11178 SUPPORT RODS, Stainless Steel. STAINLESS STEEL SUPPORT ROD 46CM 18.

11178 SUPPORT RODS, Stainless Steel. STAINLESS STEEL SUPPORT ROD 61CM 24.

Category