• 0
Shop Products $

Shower Cap For Use On 7580P100 Filters To Deflect Moistrue During Decon Shower.

40 Inch Straight Tube For Use With Primair Hood.

Charger, Evahl, Gang Charger, Six Port.

Charger, Evahl, Single Port.

Battery, Evahl, For Hood Style Headtops.

Papr, Evahl, Blower, Belt, Battery, Charger, He Filter.

Papr, Evahl, Blower, Belt, Battery.

Papr, Evahl, Blower, Belt, Battery, Charger.

Papr, Evahl, Blower Unit Only.

Papr, Evahl System With Rt4T Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With Rt3T, Decon Belt Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With Rt3T Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With 20Tjt, Decon Belt Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With 20Tjt Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With 20Tict. DECON BELT BLOWER, BATTERY, BELT, CHARGER, BREATHING TUBE, HEADTOP

Papr, Evahl System With 20Tict Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With 20Ticht Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With 20Sict Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With 20Sicht Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With 20Lf2M Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With 20Lf2L Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With 20Lfm Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

Papr, Evahl System With 20Lfl Blower, Battery, Belt, Charger, Breathing Tube, Headtop.

P100/MULTI-PURPOSE. Defender: Organic Vapor, Ammonia, Methylamine, Formaldehyde, Acid Gas (Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide,Hydrogen Fluoride, Chlorine Dioxide) & P100 Cartridge/Filter Combniation. 2 per pack, 12 packs per case.

P100/AMMONIA/METHYLAMINE. Ammonia, Methylamine & P100 Cartridge/Filter Combination. 2 per pack, 12 packs per case.

P100/ORGANIC VAPOR/ACID GAS. Organic Vapor, Acid Gas (Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Fluoride, Chlorine Dioxide) & P100 Cartridge/Filter Combination. 2 per pack, 12 packs per case.

P100/ACID GAS/FORMALDEHYDE. Acid Gas (Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Fluoride, Chlorine Dioxide), Formaldehyde & P100 Cartridge/Filter Combination. 2 per pack, 12 packs per case.

P100 ORGANIC VAPOR. Organic Vapor Cartridge/P100 Filter. 2 per pack 12 packs per case.

CART MULTI-PURP OV AG AM MA FM. Defender: Organic Vapor, Ammonia, Methylamine, Formaldehyde & Acid Gas (Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Sulfide, Hydrogen Fluoride, Chlorine Dioxide) Cartridge. 2 per pack, 18 packs per case.

AMMONIA/METHYLAMINE. Ammonia & Methylamine Cartridge. 2 per pack, 18 packs per case

ACID GAS ORGANIC VAPOR. Organic Vapor & Acid Gas (Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Fluoride, Chlorine Dioxide) Cartridge. 2 per pack, 18 packs per case.

ACID GAS/FORMALDEHYDE. Acid Gas (Chlorine, Hydrogen Chloride, Sulfur Dioxide, Hydrogen Fluoride, Chlorine Dioxide) & Formaldehyde Cartridge. 2 per pack, 18 packs per case.

CARTIDGE ORGANIC VAPOR. Organic Vapor Cartridge for Air purifying respirators. 2 per pack, 18 packs per case.

HOOD DBL BIB ACETATE LENS RATCHET SUSP - 20TICT

HOOD DBL BIB ACETATE LENS NO SUSP - 20TICNT

HOOD DBL BIB ACETATE LENS RATCHET SUSP - 20TIC

ASSEMBLY, COMBINATION FILTER PK6.

Acetate Lens, Suspension Free, Sport Cuff.

3M(TM) Versaflo(TM) S-403L Hood. Is approved for use with certain 3M(TM) Powered Air Purifying and Supplied Air Respirator Systems.

3M(TM) Versaflo S-403S Hood. Is approved for use with certain 3M(TM) Powered Air Purifying and Supplied Air Respirator Systems.

Accessories for Versafloâ„¢ M-Series Respiratory Hard Hat Assemblies, 3M - 7100138631, Peel-Off Visor Covers for Premium Visor 89202-752

Accessories for Versafloâ„¢ M-Series Respiratory Hard Hat Assemblies, 3M - 7000127689, Peel-Off Visor Covers for Standard Visor 89202-750

M-956 is an adhesive foam pad. That can be used on any 3M(TM) Versaflo(Tm) M-Series product. When properly attached to the ratchet on the back of the headband, it can help fit smaller wearers and/or provide additional comfort to any wearer.

The M-919 Visor Frame Buttons. Are Replacement Parts For All 3M(Tm) Versaflo(Tm) M-Series Products

The M-936 Faceseal. Is A Comfortable, Low-Linting Faceseal For 3M(Tm) Versaflo(Tm) M-100 Series And M-300 series products.

The M-935 Faceseal. Is An Economical, Easily-Replaced Faceseal For 3M(Tm) Versaflo(Tm) M-100 Series And m-300 series products.

PREMIUM Visor Is A Scratch-Resistant, Chemical-Resistant Visor FoR all 3m(tm) versaflo(tm) m-series products. includes one m-921 visor gasket..

The M-921 Visor Gasket Is A Replacement Part For All 3M(Tm) Versaflo(Tm) M-Series Products.

TR-332. Is a high capacity Lithium Ion battery pack for the 3M(TM) Versaflo(TM) TR-300 PAPR. Under certain conditions, it will provide up to __ hours of operation.

TR-326 is a durable leather belt. For use with the 3M(TM) Versaflo(TM) TR-300 PAPR and the Speedglas(TM) TR-300-SG PAPR.

The M-960 Visor Pivot Kit Is A Replacement Part For All 3M(Tm) Versaflo(Tm) M-Series Products.

The M-920 Visor Frame Assembly. Is A Replacement Part For 3M(Tm) Versaflo(Tm) M-Series Products. It Includes two m-919 visor frame buttons.

The M-354 Forehead Seal Is A Replacement Part For 3M(Tm) Versaflo(Tm) M-300 Series Hardhats.

The M-350 Suspension. Is a replacement part for 3M(TM) Versaflo(TM) M-300 Series Hardhats and M-400 Series Helmets.

The M-316 Airflow Deflector. Is a replacement part for 3M(TM) Versaflo(TM) M-300 Series Hardhats and M-400 Series Helmets.

Versafloâ„¢ M-Series Respiratory Hard Hat Assemblies, 3Mâ„¢ - 7000052874, Hard Hat Assembly with Premium Visor and Flame Resistant Faceseal

Versafloâ„¢ M-Series Respiratory Hard Hat Assemblies, 3Mâ„¢ - 7000002382, Hard Hat Assembly with Standard Visor and Faceseal

The M-154 Forehead Seal Is A Replacement Part For 3M(Tm) Versaflo(Tm) M-100 Series Faceshields.

The M-150 Suspension Is A Replacement Part For 3M(Tm) Versaflo(Tm) M-100 Series Faceshields.

M-116 Airflow Deflector. Is A Replacement Part For 3M(Tm) Versaflo(Tm) M-100 Series Faceshields

The 3M(Tm) Versaflo(Tm) Bt-30. Breathing tube connects any versaflo headtop to any versaflo air source. it features a flexible helix that adjusts to the appropriate length for the individual wearer.

The 3M() Hood. S-533L is approved for use with certain 3m() powered air purifying and supplied air respirator systems.

Papr & Battery.

Breathing Tube. For use with PAPRs and Loose Fitting Facepieces, Extra Large 38in

Loose Fitting Facepiece, Tychem Qc, Large.

Loose Fitting Facepiece, Tychem Qc, Medium.

Loose Fitting Facepiece, Tychem Qc, Small.

LENS COVER 100/CS. Standard lens covers for use with 3M(TM) Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403

Head Harness Button. six buttons for use on the 3m(tm) ultimate fx full facepiece reusable respirators ff-401, 402 and 403.

Head Harness Buckle. six buckles for use on the 3m(tm) ultimate fx full facepiece reusable respirators ff-401, 402 and 403.

Bayonet Assembly 10/Case. Bayonet Connection Replacement Assembly Includes Inhalation Valve. For Use With 3M(Tm) Ultimate Fx Full Facepiece Reusable Respirators Ff-401, 402 And 403.

SPEAKING DIAPHRGM ASMBLY. Replacement assembly for speaking diaphragm used with 3M(TM) Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403.

Exhalation valve cover Standard. For use with 3M(TM) Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403.

EXHALATION VALVE ASSEMBLY. Includes mounting seat and 3M(TM) Cool Flow(TM) Valve for use with 3M(TM) Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403

Head Harness Attachment. Comfort cradle Head harness attachment replacement for use with 3M(TM) Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403, and on the 3M(TM) Head Harness FF-400-04.

LENS FRAME ASSEMBLY 5/CS. Lens frame assembly replacement. Includes screw, nut, and identification plate for use on 3M(TM) Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403

Head Harness 5/CS. Single Replacement for use on the 3M(TM) Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403.

LENS REPLACEMENT 5/Cs. Single lens assembly replacement for use on the 3M(TM) Ultimate FX Full Facepiece Reusable Respirators FF-401, 402 and 403

Filter Organic Vapor. Organic vapor filter

Peel-Off Visor Cover. The 3m(tm) visor cover s-922 is a transparent covering that can be applied to the all s-600 and s-700 hood assemblies to protect the visor from contaminants and scratches.

VISOR COVER PEEL-OFF S/M BG40 - 7000127435

Peel-Off Visor Cover, Small/Medium. The 3m(tm) visor cover s-920 is a transparent covering that can be applied to certain 3m(tm) s-series hoods to protect the visor from contaminants and scratches. the s-920s is for small/medium headcovers and hoods only.

VISOR COVER PEEL-OFF M/L BG40 - 7000127434

Peel-Off Visor Cover, Medium/Large. The 3m(tm) visor cover s-920l is a transparent covering that can be applied to certain 3m(tm) s-series hoods to protect the visor from contaminants and scratches. the s-920l is for medium/large headcovers and hoods only.

Size Reducing Comfort Pad.

Comfort Pad.

Breathing Tube Cover. This cover, which can be used to protect the tube and extend the life, is used on breathing tubes used with the hardcap and gvp assemblies.

Replacement Hood With Inner Collar. With a 3m(tm) premium head suspension s-950 installed inside, the s-605 hood is approved for use with certain 3m(tm) powered air purifying and supplied air respirator systems the s-605 is the replacement hood for the s-655 hood assembly.

Replacement Hood. With a 3m(tm) premium head suspension s-950 installed inside, the s-807 hood is approved for use with certain 3m(tm) powered air purifying and supplied air respirator systems the s-807 is the replacement hood for the s-857 hood assembly.

REPLACEMENT HOOD S8055 PK5 - 7000052769

Hood W/Integrated Head Suspension, Sm/Med. The 3m(tm) hood s-433s is approved for use with certain 3m(tm) powered air purifying and supplied air respirator systems.

Hood W/Integrated Head Suspension, Med/Lrg. The 3m(tm) hood s-433l is approved for use with certain 3m(tm) powered air purifying and supplied air respirator systems.

Headcover, White, Small/Medium. The 3m(tm) headcover s-133s is a loose fitting facepiece approved for use with certain 3m(tm) powered air purifying (papr) and supplied air respirator systems.

Headcover, White, Medium/Large. The 3m(tm) headcover s-133l is a loose fitting facepiece approved for use with certain 3m(tm) powered air purifying (papr) and supplied air respirator systems.

Chin Strap.

ADPTR BG4 - 7000002156

Respirator Cleaning Wipes, 3Mâ„¢ - 7000001938, Respirator Cleaning Wipes

Mylar Lens Covers. Adhesive backed. For use with the RT series respirator hood. 25 per package.

Lever Lock Kit. Holds PAPR in place and locks belt and blower together. For Bullard EVA Series PAPR belt back plate.

Belt Extender. Vinyl belt extender for EVA Series PAPR belt.

Replacement Belt. For EVA Series PAPR respirator systems. Chemically resistant closed cell foam. Easy to decon. Double buckle size adjustment.

Shower Cap. For EVA Series HEPA filter PAPRFC3 only. Protects filter when worker must enter a decon shower.

HEPA Particulate Filiter. For use with Bullard EVA Series PAPR Respirator systems.

Gang Charger. 6 port charger for EVA Series PAPR batteries; EVABAT1 or EVABAT2.

Smart Charger. Single port. To be used for charging EVABAT1 or EVABAT2 batteries.

Replacement Battery for EVA Series PAPR. Lithium polymer. 7-8 hours. Green in color. For use with EVA blower and Spectrum full face mask.

Replacement Battery for EVA Series PAPR. Lithium polymer. 7-8 hours. Black in color. For use with EVA blower and hood respirator systems.

EVA Series PAPR Blower. Blower with belt, battery, and battery charger. Filter sold separately.

Eva Series PAPR System. Blower with belt and battery, battery charger, breathing tube, air flow indicator, and Spectrum full face mask and breathing tube. Large mask. Filter sold separately.

Eva Series PAPR System. Blower with belt and battery, battery charger, breathing tube, air flow indicator, 20TJ TYCHEM QC single bib hood, and 20RT suspension. Filter sold separately.

HOOD DOUBLE BIB TYCHEM QC - RT3

FLOW CONTROL SCHRADER 1/4IN - F41

FLOW CONTROL HANS BRAS 1/4IN - F40B

FLOW CONTROL CEJN 1/4IN - F37

FLOW CONTROL HANS BRASS 1/2IN - F35B

FLOW CONTROL SNAPTITE SS 1/4IN - F34

FLOW CONTROL SNAP BRAS 1/4IN - F33

FLOW CONTROL SNAPTITE 1/4IN - F32

FLOW CONTROL SCHRAD 1/4IN - F31

FLOW CONTROL 1/4IN HANSEN SS - F30S

FLOW CONTROL 1/4IN HANSEN BRAS - F30B

VEST DUAL COOL SIZE 5X - DC705X

HOOD SYST 20SIC W/HAN FIT - CC20SIC30

COOL TUBE AC100037 1/4IN - AC100037

COOL TUBE AC100033 1/4IN - AC100033

COOL TUBE AC100032 1FT 4IN - AC100032

HOSE AIR SUP RESPIR 25FT 1/4IN - 46918

HOSE AIR SUP RESPIR 50FT 1/4IN - 46917

HOSE AIR SUP RESPIR 25FT 3/8IN - 46916

FILTER AIRLINE REPLAC CANIST - 41AF

HOOD RESPIRATOR 20TICN - 20TICNX

COVER TYCHEM QC BREATHING TUBE - 20QCBTC

LENS MYLAR COVER 20LCL PK200 - 20LCLBP

Clear Breathing Tube Covers. For Bullard Breathing Tubes for use with Bullard respirator hoods. 100 per package.

Breathing Tube. For Bullard respirator hoods used with Bullard Powered Air Purifying Systems. 32 inches long. Extra long.

Filter R95. Comes with 10 per pack, 12 packs per case.

Remote Air Manifold with Regulator. 8 outlet fitting, 1/4 , Industrial Interchange Hansen compatible, Stainless, hard case included, Independent Regulators

Remote Air Manifold with Regulator. 8 outlet fitting, 1/4 Cejn, hard case included , Independent Regulators

Remote Air Manifold with Regulator. 8 outlet fittings, 1/4 Snap-Tite, hard case included, Independent Regulators

Remote Air Manifold with Regulator. 8 outlet fitting, 1/4 Schrader , hard case included, Independent Regulators

Remote Air Manifold with Regulator. 8 outlet fittings, 1/4 Industrial Interchange Hansen compatible, hard case included, Independent Regulators

Remote Air Manifold with Regulator. 4 outlet fitting, 1/4 Industrial Interchange Hansen compatible, Stainless, hard case included, Independent Regulators

Remote Air Manifold with Regulator. 4 outlet fitting, 1/4 Cejn , hard case included, Independent Regulators

Remote Air Manifold with Regulator. 4 outlet fittings, 1/4 Snap-Tite, hard case included, Independent Regulators

Remote Air Manifold with Regulator. 4 outlet fitting, 1/4 Schrader , hard case included, Independent Regulators

Remote Air Manifold with Regulator. 4 outlet fittings, 1/4 Industrial Interchange Hansen compatible, hard case included, Independent Regulators

Remote Air Manifold with Regulator. 2 outlet fittings, 1/4 Industrial Interchange Hansen compatible, Stainless, hard case included, Independent Regulators

Remote Air Manifold with Regulator. 2 outlet fittings, 1/4 Cejn, hard case included , Independent Regulators

Remote Air Manifold with Regulator. 2 outlet fittings, 1/4 Snap-Tite, hard case included, Independent Regulators

Replacement Filter Element Kit. for 100 cfm - includes A, B and C filter elements

Replacement Filter Element. Third Stage element - C- Activated Charcoal -100 cfm

Replacement Filter Element. Second Stage element (B) Coalescing - 100cfm

Replacement Filter Element. First Stage element (A) Particulate- 100 cfm

Replacement Filter Element Kit. For 50 cfm - includes A, B and C filter elements

Replacement Filter Element. Third Stage element - C- Activated Charcoal -50 cfm

Replacement Filter Element. Second Stage element (B) Coalescing - 50cfm

Replacement Filter Element. First Stage element (A) Particulate- 50 cfm

Replacement Filter Element. kit for 15 or 30 cfm - includes A, B and C filter elements

Replacement Filter Element. Third Stage element - C- Activated Charcoal - 15 or 30 cfm

Replacement Filter Element. Second Stage element (B) Coalescing - 15 or 30 cfm

Replacement Filter Element. First Stage element (A) Particulate- 15 or 30 cfm

Calibration Kit. For Clean Air Box CO Monitor systems, includes carrying case, 34L cylinder Zero and CO gas (10ppmO, regulator and tubing

CO Monitor. For high pressure air systems, includes carrying case, monitor and connection fittings- audible and visual alarms

Particulate Filter. NIOSH approved. Use in a variety of applications including welding, brazing, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the PEL with half facepieces or 50 times PEL with full facepieces.

Breathing Tube Clamp. Black. For CC20 and RT Series Hood Style Respirators (Package of 10)

Head Strap with Hardware. Replacement for 5400 Series.

SAF-T-FIT P1130 M/L-1 EA - 14110440

Facepiece. Willson saf-t-fit plus filtering facepieces - - small - p100 w/boomerang seal & valve ( 1 each, 10 eaches/case)

Facepiece. Willson Saf-T-Fit Plus Filtering Facepieces - N1125ML - Medium/Large-N95 w/Boomerang Seal & Valve (20/Box, 10 Boxes/Case)

Cartridge. T-Series Cartridges & Filters - Style No. T08P100 - Uni-Sorb Multi-Contaminant Cartridge w/P100 (4/Box, 12 Boxes/Case)

Maintenance-Free Tyvek® Hood Assembly with Low Pressure Flow Adapter and Suspension, Allegro - 9910

Replacement Breathing Tube. For the Compact Air PAPR blower/battery assembly, CA101. For use with Primair Series.

Replacement Air Flow Indicator. For the Compact Air blower/battery assemblies CA101 and CA102.

Cover Lens, Peel-Off. Three (3) sheets per set. Five (5) sets per package. For use with the Primair Plus Hood.

Shroud. Tyvek QC. To protect the Y breathing tube used with the North tight fitting facepieces, as part of the North Compact Air PAPR.

Shroud. Tyvek QC. To protect the Primair Series assemblies, as part of the Compact Air PAPR.

Replacement Sweatband. For headgear PA103.

Replacement Primair Loose-Fitting Facepieces. Tyvek AC, medium. Ten (10) facepieces per box.

Replacement Primair Loose Fitting Facepieces. Tyvek QC, small. Ten (10) facepieces per box.

Primair Plus Headgear Assembly. For use with Compact Air PAPR. Includes: (1) adjustable Headgear; (1) Hood with adjustable bib; Tyvek QC, universal size, (1) Package Peel-off cover lens.

Primair Headgear Assembly. For use with Compact Air PAPR. Includes (1) adjustable Headgear; (1) Loose fitting facepiece; Tyvek QC, Medium.

Primair Headgear Assembly. For use with Compact Air PAPR. Includes (1) adjustable Headgear; (1) Loose fitting facepiece; Tyvek QC, Small.

X-plore® Air-Purifying Respirators, Draeger - 6738021, R95 Filter Pads

X-plore® Air-Purifying Respirators, Draeger - 6738020, N95 Filter Pads

X-plore® Air-Purifying Respirators, Draeger - 6738037, Ammonia/Methylamine (AM/MA)/P100

X-plore® Air-Purifying Respirators, Draeger - 6738035, Organic Vapor/Acid Gases (OV/AG/FM/CD/HF)/P100

X-plore® Air-Purifying Respirators, Draeger - 6738034, Organic Vapors (OV )/P100

X-plore® Air-Purifying Respirators, Draeger - 6738027, Ammonia/Methylamine (AM/MA)

X-plore® Air-Purifying Respirators, Draeger - 6738025, Organic Vapor/Acid Gases (OV/AG/FM/CD/HF)

X-plore® Air-Purifying Respirators, Draeger - 6738024, Organic Vapors (OV)

X-plore® Air-Purifying Respirators, Draeger - R55352, Large, 3502 Series Reusable Half-Masks

X-plore® Air-Purifying Respirators, Draeger - R55351, Small, 3500 Series Reusable Half-Masks

HOOD DOUBLE BIB TYCHEM SL - RT4

HOOD REPLACEMENT VERSAFLO IN COLLAR - 7100292218

FILTER HE TR-3712N VERSAFLO CS5 - 7100018971

UNIVERSAL SPECTACLE KIT 102 - 7100254233

SIGHTLINE TYCHEM2000 - STLN2K

HOOD SET XPLORE 800 - 3703441

FILTER OV/AG/HE X-PLORE 8000 - 6739565

BUMP CAP HOOD X-PLORE 8500 - NA11013

HELMET HOOD X-PLORE 8500 - NA11014

HELMET PCVISOR X-PLORE 8500 - NA11012

FILTER OV X-PLORE 8000 - 6739575

FILTER CL HF AM MA FM HS SD HC HE - 6739570

HOOD STD FITTING W HEPA FILTRATION MD - 20LFXLHE

HOOD STD FITTING W HEPA FILTRATION LG - 20LFMHE

HOOD STD FITTING W HEPA FILTRATION XL - 20LFLHE

BELT WAIST QUICK LOC - S-4011

HOOD CLEAR XT PK30 - S-3112-30

BACK HARNESS - S-3105

COVER XT BLOWER PK10 - S-3103-10

BREATHING TUBE COVER PK10 - S-3102-10

FLOW METER FOR SENTINEL BLOWERS - S-2010

INSTALLATION TOOL BREATHING TUBE COVER - 6000-61508-02

STARTER HOSE ASSEMBLY V10 SRS BK 3/8IN - 469650

BREATHING TUBE HOOD THRED F/SUPPLIED AIR - SARHBT

HOOD DOUBLE BIB NECK TYCHEM 4000 CS10 - RT4T

HM500 Series Half Mask Respirators, Honeywell Safety - HM502TL, Large, Half mask respirator, drop down

HM500 Series Half Mask Respirators, Honeywell Safety - HM502TM, Medium, Half mask respirator, drop down

HM500 Series Half Mask Respirators, Honeywell Safety - HM502TS, Small, Half mask respirator, drop down

HM500 Series Half Mask Respirators, Honeywell Safety - HM501TL, Large, Half mask respirator, threaded, fixed

HM500 Series Half Mask Respirators, Honeywell Safety - HM501TM, Medium, Half mask respirator, threaded, fixed

HM500 Series Half Mask Respirators, Honeywell Safety - HM501TS, Small, Half mask respirator, threaded, fixed

HOOD/FACEPIECE W/HEPA EXHALATION LARGE - 20LF2LHE

HOOD/FACEPIECE W/HEPA EXHALATION MEDIUM - 20LF2MHE

HOOD/FACEPIECE WITH HEPA EXHALATION - 20LF2SHE

Magid® Cool Powered by Mission® Cooling Neck Gaiter and Face Cover, Magid Glove - D0S05150

Magid® Cool Powered by Mission® Cooling Neck Gaiter and Face Cover, Magid Glove - D0S04150

HOOD ASSEMBLY VERSAFLO WITH INNER SHROUD - 7000002348

HEADBAND VERSAFLO FOR HEAD SUSPENSION - 7000127436

CARTRIDGE PROT LENS 0.09IN UNTMPD - 454-473798

FACEPIECE ABRASI-BLAST LG DUAL X HYCAR - 454-472670

FACEPIECE ASSY ABRASI-BLAST DM MD DUAL X - 454-472666

PLUG DUST ADAPTER - 454-59686

STRAP CONNECTOR DOUBLE D-RING PE 3 FT - 454-SFP2267503

WIPE RESPIRATOR DISPOSABLE 8 X 11IN BX50 - 454-10022871

Eva/Evahl Belt Decon Urethane/Vinyl. EVA/EVAHL belt for PAPR blower assembly, Urethane/Vinyl belt is comfortable, strong, and nonporous, Easy to decontaminate with smooth, crevice-free material, Can be paired with EVABKPK2, Use vinyl belt extension (EVAEXT1) to expand diameter of belt

Eva Backpack Harness With Evabelt2 Qty1. Eva Backpack Harness, with EVABELT 2, Includes backpack (BKPK2) and belt (EVABELT1), Unisex design - for ALL body types, Effective weight distribution means less fatigue, Donning/duffing without a friend or tabletop assistance, quantity: 1

Eva Backpack Harness With Evabelt1 Qty1. Eva Backpack Harness, with EVABELT 1, Includes backpack (BKPK2) and belt (EVABELT1), Unisex design - for ALL body types, Effective weight distribution means less fatigue, Donning/duffing without a friend or tabletop assistance, quantity: 1

Eva Backpack Harness Only Qty1. Eva Backpack Harness, Must be paired with belt (EVABELT1 or EVABELT2), Worn on front or back torso ((PA1BTXL, PA20LFBTXL, or PAHBTXL breathing tube for front torso), Polyester, webbing with TPU coating for durability and cleanability, Smooth, quantity: 1

Multi-Gas/He Cartridge Back-Mounted CS 5. Versaflo Multi-Gas/HE Cartridge, High efficiency particulate filter, Captures a broad range of certain gases and vapors, including mercury, Back-Mounted, Color: Black, Belt-Mounted, NIOSH Approved, Respiratory Assembly

Single Station Battery Charger Kit CS 1. Versaflo Single Station Battery Charger Kit, AAD, Holds charged batteries ready for use, Easy to use, Color: Gray/Blue, Gray/Blue, NIOSH Approved, It consists of a TR-640 Cradle and a TR-941 Power Supply

Hood Assembly Versaflo Wht Standard CS1. Versaflo Hood Assembly with Inner Collar and Premium Head Suspension, Color: White, S-Series, Visor Type: Clear, Size: Standard, cost-effective fabric, Application: Assembly and Mechanical, Cleaning, Painting, Provides head, face, and shoulder coverage.

Head harness part, RPLC.

Hood Replacement Universal For Pa1413/BX. Primair Hood, Replacement, 100 Series, for PA141, Universal Size, manifold directs air over lens to reduce fogging, Triple adjustment headgear for a comfortable fit, 3/Box

Hood Assembly With Collar 100 Coated. Primair Hood Assembly, with 100 coated, bibbed, Tychem QC hood with collar and adjustable headgear, universal Size

Hood Replacement Universal For Pa1313/BX. Primair Hood, Replacement, 100 Series, for PA131, Universal Size, manifold directs air over lens to reduce fogging, Triple adjustment headgear for a comfortable fit, 3/Box

Kit 1-Bay Charger N. America For Pa700. charger kit, 1bay, North America, weight: 0.8lb, with Power Cord Charger unit with power brick and cord, For PA700 rechargeable battery, can re-charge a fully depleted battery in approximately 4.5 hours, it continuously monitors the health of the battery Pack

Battery Pack Pa700 Papr Std Capacity. Battery Pack, Standard Capacity, Rechargeable, lithium-ion battery, for the PA700 belt mount PAPR, dimension: 6.5x3.0x2.5 cm, Weight: 1.3 lbs

Cartridge Cover, Size: small.

Comfort Pad, Material: Nylon, provide extra comfort/support to PA700 belt (PA751).

Breathing Tube, Y-shape, large, for tight fitting facepieces, Size: 40 inch.

Breathing Tube, Y-shape, for tight fitting facepieces, Size: 34 inch.

Hepa Filter P100 For Pa800 Papr Helmet. HEPA Filter Cartridge, Dimension: 11.0x11.0x8.5cm, Weight: 11.0 lb, for use with the PA800 PAPR Welding helmet, 5/Box

Papr Starter Kit Pa700 With Nylon Belt. Primair PAPR System, PA700, with nylon belt and bonus starter kit, includes blower, battery, charger, comfort pad, nylon belt, and bonus starter kit (PA100 filter and optional filter cover), Offering convenience, comfort, and confidence

Tape, PTFE Film, 3M - 7000132176, PTFE film tape, 4 mil.

CARTRIDGE REPLC ORGANIC VAPOR/ACID GAS - 7000051849

VersafloFilter Latch Assembly TR-851/94245(AAD). VersafloFilter Latch Assembly TR-851/94245(AAD), for TR-800 PAPR, IS protection - rated at Division 1 for Classes I,II,and III under the most current UL standard, Combine with certain other Versaflo components to build a complete system

Versaflo Battery Attachment Tool TR-838/94244(AAD). Versaflo Battery Attachment Tool TR-838/94244(AAD), for TR-800 PAPR and TR-830 Battery, IS protection - rated at Division 1 for Classes I,II,and III UL standard, Combine with certain other Versaflo components to build a complete system

Versaflo Battery TR-830/94243(AAD) for TR-800 PAPR. Versaflo Battery TR-830/94243(AAD), Intrinsically Safe, for TR-800 PAPR, IS protection - rated at Division 1 for Classes I,II,and III under the most current UL standard, Combine with certain other Versaflo components to build a complete system

Versaflo Gold Coated Tinted Over-Visor with UV/IR Protection, M-967N, have a low profile, designed specifically for use with select helmets, protection for head, neck and shoulders against radiant heat, sparks and splashes

VersafloOver-visor Frame, M-961N. VersafloOver-visor Frame, M-961, have a low profile, designed specifically for use with select helmets, allowing the user the flexibility to have tinted IR/UV protection when needed, protect for head, neck and shoulders against radiant heat, sparks and splashes.

Versaflo Radiant Heat Cover for M-407, M-975N. Versaflo Radiant Heat Cover, have a low profile, designed specifically for use with select helmets, Over-visor is designed to flip up, allowing the user the flexibility to have tinted IR/UV protection when needed, Application: for M-407, M-975N

Versaflo Radiant Heat Cover for M-307, M-973N. Versaflo Radiant Heat Cover, have a low profile, designed specifically for use with select helmets, Over-visor is designed to flip up,allowing the user the flexibility to have tinted IR/UV protection when needed, Application: M-307, M-973N

Replacement Blower TR-301Nfor Versaflo TR-300N. Replacement Blower TR-301N+, Color: Beige, Economy Battery, 6Hours battery life, Back-Mounted Breathing Tube, Head Cover with Suspension, Two selectable flow rate options 6.5CFM and 7.2CFM, Application: VersafloTR-300N Series

Versaflo TR-6590N Multi-Gas/HE Cartridge, TR-600 Series, Color: Black, Respiratory Assembly Headgear, Back-Mounted Breathing Tube, Cooling / Heating Valve Type, Clear Visor, Compatible with the TR-600 PAPR system, High efficiency particulate filter, cs/5

Accessories. Accessories for Versafloâ„¢ S-Series Hoods with Integrated Head Suspension, 3M - 7100005445, Versafloâ„¢ premium head suspension, gray

AdvantageRespirator Cartridges, GMC, P100, Gray. Advantage+ Respirator Cartridges, GMC, P100, Color: Gray, Filtration Grade P100, Height [Nom] 2 in, Length [Nom] 9 in, Resistance: Chlorine; Chlorine Dioxide; Hydrogen Chloride; Hyd, Used With Advantag

Advanced Particulate Filter P100 4.3in. Advanced Particulate Filter, Standards/Approvals: P100, Aerosol Type: Oil and Non-Oil, Connection type: Bayonet, Color: Magenta, With Nuisance Level Organic Vapor Relief, Easier breathing, Longer lasting, Use with Reusable Respirators, Dimension: 4.3in

Versaflo Respiratory Helmet Assembly 100/50CFM. Versaflo Respiratory Helmet Assembly, With Standard Visor, Shroud, Color: Gray, Helmet with Faceshield, M-Series, Standard: ANSI Z89.1 Type I, Class G, Valve: Air Regulating Valve, Cooling/Heating Valve, Low Pressure Valve, Capacity: 100 CFM, 50 CFM

Fit Test Solution 55ml. Fit Test Solution, Sweet, Respiratory Protection, designed to help your organization meet OSHA fit testing requirements for respirators, also can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter

Air Panel. 3M Air Panels are used to filter and regulate plant supplied air. Offers CO monitoring.

High Pressure Socket. A high pressure socket used on the 3M Compressed Air Filter and Regulator Panel 67101-258. It is a 3/8 inch MPT brass fitting.

Industrial Interchange Socket. This socket is a high pressure hose socket that may be used on the 3M Supplied Air Hose W-9435 (56621-984/80) and W-2929 (56621-990/96). It is a 1/4 inch FPT brass fitting.

Industrial Interchange Plug. This plug is a high pressure hose plug that may be used on the 3M Supplied Air Hose W-9435 (56621-984/80) or W-2929 (56621-990/96). It is a 1/4 inch FPT brass fitting.

Industrial Interchange Plug. Used with the 3M Connector W-3195 (67101-346), Low Pressure, which is used on the 3M Supplied Air Hose W-3020. It has a 1/4 inch MPT steel fitting.

Schrader Plug. Used on the 3M Connector W-3195 (67101-346), Low Pressure, which is used with the 3M Supplied Air Hose W-3020, Low Pressure. It has a 1/4 inch MPT steel fitting.

Industrial Interchange Socket. This socket is used on the 3M Supplied Air Hose W-3020, Low Pressure. It is a 3/8 inch FPT brass fitting.

Schrader Socket. This twist lock socket is a low pressure steel and brass fitting. It is used on the 3M Supplied Air Hose W-3020.

Schrader Plug. This plug is a low pressure, 3/8 inch FPT twist lock steel and brass fitting. It may be used on the 3M Supplied Air Hose W-3020.

Industrial Interchange Socket. This socket is a high pressure, 1/4 inch FPT brass fitting. This fitting is used on the 3M Supplied Air Hose W-9435 (56621-987/980) and W-2929 (56621-994/90).

Industrial Interchange Plug. This plug is a standard fitting that is used as a quick connect/disconnect on high pressure hoses. It has a 1/4 inch FPT and is made of steel.

Industrial Interchange Plug. Used on the 3M Supplied Air Hose W-3020. It has a 3/8 inch FPT fitting.

Industrial Interchange Socket. This socket is a standard fitting used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258). It is a 3/8 inch MPT high pressure socket made of brass.

Industrial Interchange Plug. This plug is an industrial interchange standard fitting used for air control valves. It is a 1/4 inch MPT high pressure plug made of steel.

Ratchet Kit. This kit is a part of the 3M Ratchet Suspension W-2879 (67101-268). It attaches to and can be used to adjust the size of the 3M Head Suspension W-2878 (67101-266) used in 3M Helmets and Hoods.

Hat Shell. When used with the 3M Head Suspension W-2878 (67101-266), the 3M Hatshell meets the requirements of ANSI standard Z89.1-2003, Type 1, Class E head protection.

Airline Adapter. This adaptor fits into the center port of the 3M Full Facepiece 7800S or 6000DIN and allows it to be used as a 3M Supplied Air Respirator.

Drain Valve. A component that is used on the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Air Pressure Regulator. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

3M Manifold W-3079 1/Case

HE Filter Element. Replacement filter for the 3M Coalescing Filter Assembly W-3012 (67101-288).

Coalescing Filter Assay. Used where the concentration of liquid aerosols in compressed air are greater than what can be filtered by the 3M Compressed Air Filter and Regulating Panel W-2806 (67101-258) alone.

Air Deflector Gasket. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-282).

Air Deflector. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Cartridge Washer. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Bowl Gasket. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Nut Base. This nut base is a component of the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Wing Nut. This wing nut is a component of the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Ratchet Head Suspension. An optional item that makes adjustment of the 3M Head Suspension W-2878-2 (67101-266) easier and faster. The ratchet band is easy to install and includes a comfortable foam pad.

Head Suspension. Designed to be used with 3M H-Series Hoods, Whitecap Helmets and Hardcap Assemblies.

Filter Cartridge. This cartridge is 99.1% efficient against 0.4-0.6 micron particles.

CO Monitor. This carbon monoxide(CO) monitor is designed to connect directly to the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Air Filter And Regulator Panel. This panel is designed to filter and regulate air being delivered to the supplied air respirator. It has a maximum capacity of 50 cfm at 105 psig. Note: This unit will NOT remove carbon monoxide (CO) from compressed air source.

Socket Dust Cap. This socket dust cap helps protect high pressure compressed air hoses. Also used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Pressure Relief Valve. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

3M Training and Fit Testing Case FT-20, Sweet 1/Case

Fit Test Collar. Used with the 3M Qualitative Fit Test Apparatus 56221-918 and 56222-920 to provide a secure hood environment.

Air Inlet Gasket. Replacement part designed for use in center inlet port of 3M Full Facepieces 7000 Series.

Full Facepiece Buttons. Designed for use with 3M Full Facepiece 7800S Series.

Tinted Lens Cover. Use with 3M Full Facepieces 7000 Series. Not for use in welding or other applications that require reduction of UV or IR radiation beyond the capability of normal nonprescription sunglasses.

Lens Cover. Use with 3M Full Facepieces 7000 Series to help protect lens.

Speaking Diaphragm Kit. Replacement part for 3M Full Facepieces 7000 Series. Includes speaking diaphragm, gasket, retainer and removal tool.

Eyeglass Frame and Mount Kit. Use with 3M Full Facepieces 7000 Series and wearer's corrective lenses. Do not use with 3M Face Mounted PAPR Systems 43100-068 or 43100-068 , 3M Welder's Faceshield 7988 or 3M Welder's Faceshield Kit 7998.

Removeable DIN Connector. Replacement part designed for use in side inlet ports of 3M Full Facepieces 7800S.

Tinted Lens Cover. Use with 3M Full Facepieces 6000 Series. Not for use in welding or other applications that require reduction of UV or IR radiation beyond the capability of normal nonprescription sunglasses.

Powerflow System. This respirator is a lightweight, face-mounted Powered Air Purifying Respirator (PAPR). It uses a single high efficiency filter for protection against dusts, mists, fumes and radionuclides, making it ideal for lead, asbestos and other hazardous particulates.

Powerflow System. This respirator is a lightweight, face-mounted Powered Air Purifying Respirator (PAPR). It uses a single high efficiency filter for protection against dusts, mists, fumes and radionuclides, making it ideal for lead, asbestos and other hazardous particulates.

Fit Test Adapter. Use to conduct quantitative fit testing on 3M Facepieces 6000 Series or 3M Facepieces 7000 Series with bayonet style cartridge/filter holders.

Motor Blower. This assembly is a component of the 3M Powerflow System 240-01-00LBC. This lightweight unit (8.0 oz.) delivers a minimum of 4 cfm when used with the required high efficiency filter.

Fit Test Hood. Used with 3M Qualitative Fit Test Apparatus 56221-918, 5621-918, and 67100-854 and 3M Training and Fit Testing Case 67101-142 as the test environment for sweet and bitter solution.

Fit Test Nebulizer. Used with the 3M Qualitative Fit Test Apparatus 56221-918, 56222-920 and the 3M Training and Fit Testing Case 67101-142.

Breathing Room Assembly. Use as a replacement part for 3M Full Facepieces 7000 Series. Does not include 3M Speaking Diaphragm Kit 67101-122.

Inhalation Port Gasket. Replacement part for use in side inlet DIN ports of 3M Full Facepieces 7800S.

Lens Assembly. Use as a replacement part on 3M Full Facepieces 6000 Series.

3M Cartridge/Filter 60928, Organic Vapor/Acid Gas/P100 60/Case.

Schrader Plug. This plug, for the air control valves, is a high pressure, 1/4 inch MPT steel fitting.

Exalation Valve Cover. Replacement part for 3M full facepiece 7000 series respirators.

Breathing Tube. Part of the 3M Air Regulating Valve Assembly W-3061(67100-816) which allows the 3M Full Facepiece 7800S or the 3M Full Facepieces 6000DIN to be operated in airline mode. The breathing tube connects to the 3M Airline Adapter W-3187 (67101-306) in the center part of the facepiece.

3M Air Regulating Valve W-3062 1/Case

Petroleum Sorbent Mini-Pillow. Pillows are designed with a scrim that encases particulate sorbent material. Pillows are used in areas where more capacity is desired than can easily be achieved using a sorbent pad.

Clamps Band. Use as a replacement part for 3M Full Facepieces 7000 Series to secure 3M Breathing Room Assembly 7916 to facepiece.

Lens Frame Kit. Replacement part for 3M Full Facepieces 7000 Series. Use to attach 3M Lens 67100-864 to facepiece. Does not include lens.

Full Facepiece Lens. Replacement part for 3M Full Facepieces 7000 Series.

Nose Cup. Replacement nose cup for 3M Full Facepieces 7000 Series.

Qualitative Fit Test Apparatus. For particulate respirator or gas/vapor respirator with particulate prefilter. Contains: hood, collar assembly, sensitivity and fit test nebulizers, 2 spare nebulizer inserts, sensitivity and fit test solutions, and instruction booklet. Meets OSHA 29 CFR 1910.134.

Air Regulator Valve Kit. Used for continuous flow on 3M 6000/6000DIN and 7000 Series Full Facepieces. This assembly includes one of each of the following: air regulating valve, airline adapter, breathing tube, waist belt, shoulder strap, full face plug.

Nose Cup Assembly. Use as a replacement part for 3M Full Facepieces 56621-876, 56621-878, 56612-880.

Bitter Fit Test Solution. Used with the 3M Qualitative Fit Test Apparatus 6710-854 to test the face to facepiece seal.

Bitter Sensitivity Solution. Used to test the sensitivity of the respirator wearer to a bitter solution. It is used with the 3M Qualitative Fit Test Apparatus 67100-854.

Full Facepiece. Use with 3M Filters 2000 Series, 3M Filter 7093, P100, 3M Cartridges 6000 Series and powered or supplied air systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.

Vortex Spare Parts Kit. This kit has the necessary items to maintain the 3M Vortex Cooling Assembly V-100 (67100-644). Includes o-rings, special washer, generator, screws, lock washer and foam pad and fastener.

Low Pressure Assembly. For L-Series Positive Pressure Headgear, low pressure systems. Adapter regulates the airflow to the headgear.

Air Regulating Valve. This valve is the main component of the 3M Air Regulating Valve Assembly V-300 (67100-694). It includes all the components necessary to regulate the airflow to the worker.

Air Regulating Valve Assembly. For L-Series Positive Pressure Headgear, high pressure systems. Regulate airflow to the headgear.

Vortemp Heating Tube. This tube is a component of the 3M Vortemp Heating Assembly V-200 (67100-680). It connects directly to the supplied air system and heats the air before it gets to the worker's breathing area.

Vortemp Muffler. This kit is a component of 3M Vortemp Heating Assemblies V-200 and V-200SS, V-300, V-300SS and V-400. It includes a retainer that holds it in place in the assembly.

Vortemp Heating Assembly. For L-Series Positive Pressure Headgear, high pressure systems. Regulate airflow and warm air by as much as 10[degree]C.

Vortex Muffler Kit. This kit is a component of 3M Vortex Cooling Assemblies V-100 (67100-644) and V-100SS (67100-646). It includes a retainer that holds it in place in the assembly.

VORTEX COOLING SYSTEM CS1 - 7100077598

Vortex Cooling Tube. This tube is the component of the 3M Vortex Cooling Assembly V-100 (67100-644). It helps keep the worker comfortable by cooling the air by up to 50-F (28-C) before it gets to the worker's breathing area.

Sweat Pad. Used on the 3M L-Series Headgear, H-Series Hood, Whitecap Helmets and Hardcap Assembly. The sweat pad attaches to the headband in the area of the user's forehead. It helps absorb perspiration and adds to the overall comfort of the user.

Replacement Filter. Used with 3M Portable Compressed Air Filter and Regulator Panel 67101-368.

Replacement Filter Kit. Used with the 3M Portable Compressed Air Filter and Regulator Panel 67100-102.

Airflow Indicator. Used to indicate the airflow rate on 3M Breathe Easy and Powerflow Systems.

Breathe Easy Powered Air Purifying Respirator (PAPR) Breathing Tube. 91cm long. Compatible with Breathe Easy hoods. Use with Breathe Easy cartridge, turbo assembly, and hood to provide comfortable and efficient powered air protection. NIOSH approved.

Breathe Easy Powered Air Purifying Respirator (PAPR) Acid Gas/HEPA Cartridges. For use with Breathe Easy Turbo Assembly 56221-892. Protect against gases, vapors, or particulates. NIOSH approved.

Organic Vapor/Chlorine/Hydrogen Chloride/Sulfur Dioxide/High Efficiency Cartridge. AEP3. Used for protection against organic vapors, chlorine, hydrogen chloride, sulfur dioxide and high efficiency particulates. For use with the Breathe Easy Belt-Mounted Powered Air Purifying Respirators (PAPRs).

HEPA Filter. Used on 3M Powerflow Systems for protection against high efficiency particulates.

Breathe Easy Powered Air Purifying Respirator (PAPR) HEPA Cartridges. For use with Breathe Easy Turbo Assembly 56221-894. Protect against gases, vapors, or particulates. NIOSH approved.

Air Panel. 3M Air Panels are used to filter and regulate plant supplied air. Offers carbon monoxide (CO) filtration and monitoring.

Half Facepiece Replacement. Use as a replacement part for 3M Half Facepieces 6000 Series.

Personal Air Cooler with Belt. Ideal in hot environments, adjusting the air flow from high pressure air sources as low as 25 degrees colder than ambient air for an improved working environment. Requires an air supply pressure range of 55-85psig.

Adjustable Flow Control Valve, Allegro - 9992

Fully Disposable Tyvek Hood with Low Pressure Flow Adaptation. One-piece construction. Breathing tube and head suspension integrated with hood assembly. Fully disposable, eliminating need for decontamination. Flexible and splash resistant. Ideal for workers with beards or goggles.

High Pressure Air Hose. Can be used on 3M High Pressure Compressed Air Systems. It has a 3/8 inch inner diameter and is equipped with MPT on both ends to accept 1/4 inch FPT fittings. Coiled hoses should be used in single length only. They cannot be combined.

High Pressure Air Hose. Can be used on 3M High Pressure Compressed Air Systems. It has a 3/8 inch inner diameter and is equipped with MPT on both ends to accept 1/4 inch FPT fittings. Coiled hoses should be used in single length only. They cannot be combined.

High Pressure Air Hose. Can be used on 3M High Pressure Compressed Air Systems. It has a 3/8 inch inner diameter and is equipped with MPT on both ends to accept 1/4 inch FPT fittings. Coiled hoses should be used in single length only. They cannot be combined.

Straight Air Supply Hose. For L-Series positive pressure headgear. Low pressure systems. 12.7mmID, 30.5m long.

Straight Air Supply Hose. For L-Series positive pressure headgear. Low pressure systems. 12.7mmID, 15.2m long.

Straight Air Supply Hose. For L-Series positive pressure headgear. Low pressure systems. 12.7mmID, 7.6m long.

P100 Filter. Removes organic vapor odors below the OSHA PEL. 99.97% efficient at removing solid and liquid particles including those containing oil. Use with 3M 5000, 6000, and 7000 series respirators. NIOSH 42 CFR 84 approved.

P100 Filter. Provides relief from nuisance odors generated from chlorine, sulfur dioxide, and hydrogen fluoride. 99.97% efficient at removing solid and liquid particles including those containing oil. Use with 3M 5000, 6000, and 7000 series respirators. NIOSH 42 CFR 84 approved.

6000 Series Cartridge with Stacked P100 Filter. Ammonia/methylamine/P100 cartridge. For use with 3M 6000 series respirator facepieces. NIOSH approved P100 filter is permanently attached. Meets NIOSH 42 CFR 84 standards. Approved for use against ammonia, methylamine, and particles.

6000 Series Cartridge with Stacked P100 Filter. Formaldehyde/certain organic vapors/P100 cartridge. For use with 3M 6000 series respirator facepieces. Filter is permanently attached. Meets NIOSH 42 CFR 84 standards. Approved for use against formaldehyde, certain organic vapors, and particles.

6000 Series Cartridge with Stacked P100 Filter. Acid gas/P100 cartridge. Use with 3M 6000 respirators. NIOSH approved filter is attached. Meets NIOSH 42 CFR 84 standards. Approved for use against chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide (escape only), and particles.

6000 Series Cartridge with Stacked P100 Filter. Certain organic vapors/acid gas/P100 cartridge. Use with 3M 6000 respirator. Meets NIOSH 42 CFR 84 standards. For use against certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, hydrogen fluoride, hydrogen sulfide (escape only), and particles.

6000 Series Cartridge with Stacked P100 Filter. Organic vapors/P100 cartridge. For use with 3M 6000 series respirator facepieces. NIOSH approved P100 filter is permanently attached. Meets NIOSH 42 CFR 84 standards. Approved for use against certain organic vapors and particles.

Inhalation Valve. Valve is for use with the 3M 6000 Series Full Facepiece Respirator.

Exhalation Valver. Valve is for use with the 3M 6000 Series Full Facepiece Respirator.

FACE SHIELD COVER RESP PK25 - 7100138628

Accessories for PELTORâ„¢ Optimeâ„¢ Series Earmuffs, 3M - 7000009662, Earmuff replacement hygiene kit Peltorâ„¢ HY7

Waist Belt. Replacement for North CF2007 airline adapter.

Air Flow Valve. Replacement for North CF2007 airline adapter.

Breathing Tube. Replacement for North CF2007 airline adapter.

Airline Adapter. Convert North air-purifying facepieces to supplied air. Includes breathing tube, waist belt and adjustable flow control valve.

7600 Series Full Facepiece. With North CF2007 airline adapter. Size: Med/Large.

Adapter. For North 75FFP100 filter. Attaches filter to chemical cartridges (except for Defender cartridge).

Pancake P100 Any Particulates Filter. Approved for use against any particulates. 99.97% minimum filter efficiency. Meets 42 CFR 84 requirements when used with North Safety air purifying dual cartridge respirators. NIOSH approved.

Gasket. Full facepiece replacement part for the North Safety 7700 series and 7600 series air purifying respirators.

Respirator Wipes. Designed to help ensure cleanliness, safety, and security while using respirators. Wipes keep face masks clean. Great for removing perspiration and body oils without harming the facepiece itself.

Coupler for 9.5mm ID Hose. Coupler is for use with the North Safety airline hood and full facepiece respirators.

Filter Pack. Filters are for use with the North Safety Low Maintenance Half-Mask Respirator. Ideal for welding. NIOSH 42 CFR 84 approved for use against non-oil particulates. 99% minimum filter efficiency.

Organic Vapor/Acid Gas Cartridge with P100 Filter. For organic vapor, chlorine, hydrogen chloride/fluoride, sulfur dioxide, chlorine dioxide, any particulates. 99.97% filter efficiency. Meets 42 CFR 84 requirements when used with North Safety air purifying dual cartridge respirators. NIOSH approved.

N95 Dust Filter Assembly. Approved for use against non-oil particulates. 95% minimum filter efficiency. Meets 42 CFR 84 requirements when used with North Safety air purifying dual cartridge respirators. NIOSH approved.

N95 Particulate Filter. Approved for use against non-oil particulates. 95% minimum filter efficiency. Meets 42 CFR 84 requirements when used with North Safety air purifying dual cartridge respirators. NIOSH approved.

P100 Any Particulates Filter. Approved for use against any particulates. 99.97% minimum filter efficiency. Meets 42 CFR 84 requirements when used with North Safety air purifying dual cartridge respirators. NIOSH approved.

6000 Series Cartridge. For use with 3M 6000 and 7000 series respirator facepieces. Two ammonia/methylamine cartridges per pack. NIOSH approved for use against ammonia/methylamine.

6000 Series Cartridge. For use with 3M 6000 series respirator facepieces. Two organic vapor cartridges per pack. NIOSH approved for use against organic vapors.

Quantitative Fit Testing Respirator. Large. For quantitative face-fit testing to ensure proper worker protection. 3M 6000 series facepiece with testing probe. Helps meet OSHA guidelines for respiratory protection by ensuring proper fit. This product is not to be used for respiratory protection.

Quantitative Fit Testing Respirator. Medium. For quantitative face-fit testing to ensure proper worker protection. 3M 6000 series facepiece with testing probe. Helps meet OSHA guidelines for respiratory protection by ensuring proper fit. This product is not to be used for respiratory protection.

Quantitative Fit Testing Respirator. Small. For quantitative face-fit testing to ensure proper worker protection. 3M 6000 series facepiece with testing probe. Helps meet OSHA guidelines for respiratory protection by ensuring proper fit. This product is not to be used for respiratory protection.

Bayonet Cap. Use to close the bayonet attachments on 3M Full Facepieces and 3M Combination Dual Airline Breathing Tubes.

Dual Airline Supplied Air Respirator Adapter Kit. Back-mounted. Use with 3M 6000 series half-masks and full facepieces and 7800S series full facepieces. Low-pressure regulator. Negative and positive pressure capability. NIOSH approved. With combination breathing tube, web belt, and air regulator.

Dual Airline Supplied Air Respirator Adapter Kit. Back-mounted. Use with 3M 6000 series half-masks and full facepieces and 7800S series full facepieces. High-pressure regulator. Negative and positive pressure capability. NIOSH approved. With combination breathing tube, web belt, and air regulator.

Breathing Tube. Combination dual airline back-mounted breathing tube. Used on both the high and low pressure 3M back-mounted combination kits.

Breathing Tube. This tube is part of the 3M Back-Mounted Adapter Kit SA-2000LP (56222-876) (low pressure).

Breathing Tube. Used with the 3M Dual Airline Front-Mounted Adapter Kit SA-1000LP (56222-872), Low Pressure.

Breathing Tube. Used on both the high and low pressure 3M front-mounted combination kits.

Connector Assembly. Includes the 3M Dual Airline Connector SA-1029 (56222-884) and the Waist Belt GVP-127 (43300-210). This assembly can be used with any 3M Low Pressure Dual Airline Supplied Air Respirator.

Regulator Assembly. Includes the 3M Air Regulator SA-1009 (56222-880) and Waist Belt GVP-127(43300-210). Used with breathing tube, facepiece, filters/cartridges and air supply hose, it makes a complete 3M Dual Airline Supplied Air Respirator.

Adapter Kit. Includes 3M Breathing Tube SA-2500 (56222-890), Waist Belt GVP-127(43300-210) and Air Regulator SA-1029 (56222-884). This kit, with facepiece, filters/cartridges and air hose makes a 3M Dual Airline Supplied Air Respirator.

Adapter Kit. Includes 3M Breathing Tube SA-2500 (56222-890), Waist Belt GVP-127(43300-210) and Air Regulator SA-1009(56222-880). This kit, with facepiece, filters/cartridges and air hose makes a 3M Dual Airline Supplied Air Respirator.

Dual Airlline Respirator Adapter Kit. This kit includes 3M Breathing Tube SA-1500(56222-888), Waist Belt GVP-127(43300-210) and Connector SA-1029(56222-884). This kit, with facepiece, filters/cartridges and air hose, makes a 3M Dual Airline Supplied Air Respirator.

Dual Airline Respirator Adapter Kit. This kit includes Breathing Tube SA-1500 (56222-888), Waist Belt GVP-127(43300-210) and Air Regulator SA-1009(56222-880). This kit, with facepiece, filters/cartridges and air hose, makes a 3M Dual Airline Supplied Air Respirator.

Prefilter Adapter. Adapter is for use with 3M P100 Filters (56222-931) and (56221-017).

Chin Strap. This strap can be used on 3M H-Series Hoods that use either a cap suspension or hardhat.

Face Shield Cover. This cover helps keep the lens on the 3M H-Series Hoods clean. When vision becomes obstructed, the cover can be peeled off leaving a clean shield.

Face Shield Cover. This cover helps keep the lens on the 3M H-Series Hoods clean. When vision becomes obstructed, the cover can be peeled off leaving a clean shield.

H-Series Tychem QC Hood Assembly. Wide collar with hard hat. Provides a high level of respiratory protection while allowing easy breathing. Hood fabrics are matched to the work environment. Wide, solvent-resistant, polyester faceshield. NIOSH approved.

Breathing Tube. Gray vinyl breathing tube is used with 3M Hood Supplied Air System H-Series.

Straight Air Supply Hose. For L-Series Positive Pressure Headgear, high pressure systems. 9.5mmID, 7.6m long.

Straight Air Supply Hose. For L-Series Positive Pressure Headgear, high pressure systems. 9.5mmID, 15.2m long.

Straight Air Supply Hose. For L-Series Positive Pressure Headgear, high pressure systems. 9.5mmID, 30.5m long.

Tyvek Hood. This hood is a replacement part for 3M Hood Assemblies H-421 (56222-604) and (56222-658) H-422.

P95 Prefilter. Use for oil and non-oil environments. Use with 3M 5000 and 6000 series respirators. NIOSH 42 CFR 84 approved.

5000 Series Disposable Respirator. For organic vapors. P95 assembly. Large. Preassembled. Cradle suspension. Low profile facepiece/cartridge provides a wide field of vision. With resealable storage bag, a pair of P95 prefilters, and a pair of filter retainers. Color coded by size. NIOSH approved.

5000 Series Disposable Respirator. For organic vapors. P95 assembly. Medium. Preassembled. Cradle suspension. Low profile facepiece/cartridge provides a wide field of vision. With resealable storage bag, a pair of P95 prefilters, and a pair of filter retainers. Color coded by size. NIOSH approved.

5000 Series Disposable Respirator. For organic vapors. P95 assembly. Small. Preassembled. Cradle suspension. Low profile facepiece/cartridge provides a wide field of vision. With resealable storage bag, a pair of P95 prefilters, and a pair of filter retainers. Color coded by size. NIOSH approved.

6000 Series Half Facepiece Respirator with P100 Filters. Small. Use with 3M 6000 series cartridges and filters. Reusable. No retainers needed for filter or cartridge replacements. Filters are approved for protection against dust, fumes, mist, radionuclides, radon daughters, and asbestos. NIOSH approved.

5000 Series Disposable Respirator. For organic vapors/acid gases. Medium. Preassembled. Cradle suspension. Low profile facepiece/cartridge provides a wide field of vision. With resealable storage bag and replaceable prefilters. Color coded by size. NIOSH approved.

5000 Series Disposable Respirator. For organic vapors. Medium. Preassembled. Cradle suspension. Low profile facepiece/cartridge provides a wide field of vision. With resealable storage bag and replaceable prefilters. Color coded by size. NIOSH approved.

5000 Series Disposable Respirator. For organic vapors. Small. Preassembled. Cradle suspension. Low profile facepiece/cartridge provides a wide field of vision. With resealable storage bag and replaceable prefilters. Color coded by size. NIOSH approved.

7000 Series Full Facepiece Respirator. For industrial applications. Double flanged face seal, nosecup, adjustable straps. Scratch-resistant lens. NIOSH approved. Medium.

7000 Series Full Facepiece Respirator. For industrial applications. Double flanged face seal, nosecup, adjustable straps. Scratch-resistant lens. NIOSH approved. Small.

Exhalation Valve. Replacement part for 3M Half and Full Facepieces 7000 Series.

7000 Series Full Facepiece Respirator. For industrial applications. Double flanged face seal, nosecup, adjustable straps. Scratch-resistant lens. NIOSH approved. Large.

3M Inhalation Port Gasket 6895/07145(AAD) 80/Case

Tube Clamp. This clamp is used to secure the breathing tube on the 3M Hardcap Assembly.

Headband Assembly. This assembly includes the 3M Chin Strap W-2913 (43300-212). It is used with the 3M Snapcap Hood Assembly W-3259 and can be adjusted for wearer comfort.

Repirator Prefilter. NIOSH approved for environments containing certain non-oil based particles. Use with 3M Respirators 5000 Series or 3M Cartridges 6000 Series, and 3M Filter Retainer 501.

6000 Series Cartridge. For 3M 6000 respirator. 2 multi-gas/vapor cartridges per pack. NIOSH approved. Use for organic vapor, chlorine, chlorine dioxide, hydrogen chloride/fluoride/sulfide (escape only), sulfur dioxide, ammonia, methylamine, formaldehyde.

Prefilter Retainer. Use with #8910 N95 Particulate Prefilter in combination with 8000 Series cartridges.

8000 Series N95 Filter/Prefilter. For use with Moldex 8000 series half-mask respirators (56219-040 series). Easy snap-on mount eliminates mis-threading and misalignment. NIOSH approved.

8000 Series Multi-Gas/Vapors Cartridge. For use with Moldex 8000 series half-mask respirators (56219-040 series). Easy snap-on mount eliminates mis-threading and misalignment. Each cartridge comes with a new inhalation valve. NIOSH approved.

8000 Series Ammonia/Methylamine Cartridge. For use with Moldex 8000 series half-mask respirators (56219-040 series). Easy snap-on mount eliminates mis-threading and misalignment. Each cartridge comes with a new inhalation valve. NIOSH approved.

8000 Series Organic Vapor/Acid Gas Cartridge. For use with Moldex 8000 series half-mask respirators (56219-040 series). Easy snap-on mount eliminates mis-threading and misalignment. Each cartridge comes with a new inhalation valve. NIOSH approved.

Respirator Storage Bags. Reusable storage bags keep equipment contaminant free. Large, 35.6x40.6cm transparent bag with zipper. Made of tough 10mil poly to last longer and hold half- or full-mask sizes. Cleaning instructions are printed on bag.

Disposable Respirator Storage Bags. Single-use bags with gusset help prevent cross contamination of any personal safety equipment such as respirators or ear muffs. Large, 53.3Lx27.9Wx20.3Dcm bags come with pressure-sensitive seals where cleaning information can be recorded.

Chemical Sensing Chip. Measures methylene chloride. For use with Chip Measurement System Analyzer (34331-684). Range: 10 to 200ppm.

Vinyl Waist Belt. This Vinyl Waist Belt Is An Optional Component Of 3M GVP Systems.

Respirator Power Cord. Provides the necessary connection between the battery and the motor blower.

Chin Stap. Intended to be used with 3M Whitecap Helmets, Hardcap, Snapcaps and Airhat Helmets.

Thum Scew Hase Clamp. This clamp is used on 3M Whitecap Helmets.

Vinyl Breathing Tube Cover. This cover, which can be used to protect the tube and extend the life, is used on breathing tubes used with the hardcap and 3M GVP assemblies.

Supplied Air Hose, 30.5m. This 3/8 inch inner diameter (ID) hose is used on 3M supplied air respirator systems. High pressure hose with Schrader fittings. 30.5m lengths of this hose may be combined up to a maximum of 91.4m (three sections).

Supplied Air Hose, 15.2m. This 3/8 inch inner diameter (ID) hose is used on 3M supplied air respirator systems. High pressure hose with Schrader fittings. Do not combine 7.6m or 15.2m lengths of this hose.

Supplied Air Hose, 7.6m. This 3/8 inch inner diameter (ID) hose is used on 3M supplied air respirator systems. High pressure hose with Schrader fittings. Do not combine 7.6m or 15.2m lengths of this hose.

Socket. 1/4 in. body size, 1/4 in. FPT, Schrader. This socket is a high pressure 1/4 inch female pipe thread twist lock steel and brass fitting. Used on 3M supplied air hose.

Schrader Plug. 1/4 in. body size, 1/4 in. FPT, Schrader. This plug is a high pressure steel fitting. May be used on 3M supplied air hose.

Socket. 1/4 in. body size, 3/8 in. MPT, Schrader. A high pressure. 3/8 inch male pipe thread twist lock fitting that is used on the 3M compressed air filter and regulator panel.

Inhalation Valve. This is a replacement inhalation valve designed for 3M Half Facepiece Respirators 43100-104, 43100-106 and 43100-108.

Comfort Belt. Adjustable belt designed to evenly distribute the weight of a 3M GVP-Series Belt-Mounted Powered Air Purifying Respirator (PAPR). Can accomodate waist sizes from 26 inches to 54 inches. The PAPR can be positioned in the back or on either side.

P95 Particulate Filter. For use as prefilter for 3M 5000 Series Respirators. Protects against solids from processing minerals, coal, iron ore, cotton, flour; metal fumes from welding, brazing, cutting of metals; liquid/oil based particles from sprays that do not emit harmful vapors. NIOSH approved.

SCBA DUFFLE BAG - 4054934

ASSY ADPTR CEJN TO SCHRADER - 4053005

ASSY ADPTR CEJN TO HANSEN SS - 4053003

ASSY ADPTR CEJN TO HANSN BRASS - 4053004

KIT CYL/VALVE 2216/30 MIN ALUM - 4054856

K-KART IIW/150'HOSE REEL S BOX - 4055330

K-KART II W/150' HOSE REEL - 4055329

K-KART IIW/300'HOSE REEL S BX - 4055328

HANDY PAK PORTABLE AIR SYSTEM - 4053879

ASSY 100 FT AIRLNE HOSE COMPLT - 4059063

COALESCNG FLTR 100CFM AFP GR D - 4055363

ASSY HOSE 75 FT - 4054854

ASSY 50 FT AIRLINE HOSE COMPLT - 4059062

ASSY CEJN SOCKET + UNION - 4059253

COALESCING FLTR 50CFM AFP GR D - 4055360

ADSORBER FILTER 50CFM AFP GR D - 4055361

ASSY 25 FT AIRLINE HOSE COMPLT - 4059061

ASSY HOSE 5 FT - 4059357

PARTCULTE FLTR 100CFM AFP GR D - 4055362

HANSEN STAND STL SOC+CHR FTTG - 4050835

ASSY SCHRADER SOCKET + UNION - 4059249

ASSY SOCKET + UNION FOSTER SS - 4051993

SNAPTITE SOCKET+UNION ASSEMBLY - 4059251

ASSY HANSEN SOCKET + UNION - 4059247

HANSEN STAND STL PLG+CHR FTTG - 4050836

PARTICULTE FLTR 50CFM AFP GR D - 4055359

COVER BREATHING TUBE - 4055203

MASK NFPA EPDM - 4052955

ASSY WELDING SHIELD - 4053437

Accessories. Accessories for X-plore® 6570 Full Face Masks, Dräger - 4055092, Lens Overlay Protectors, Clear

BAG CARRYING PANORAMA NOVA - 4053847

accuro Hard Side Kit. Contains accuro Gas Detector Pump (34330-068), Deluxe Tube Opener (34330-042), spare parts kit, rubber caps (package of 10), screwdriver, Allen wrench, carrying case. Pump is for use with Short-Term Detector Tubes. Pump stroke volume: 100mL. Pump dimensions: 8.5Hx17Lx4.5Wcm.

Ultra-TwinA Respirators, Medium, Hycar Silicon, Lens Material Polycarbonate, Large chin cup makes it easy to position, Five suspension headstraps and roller buckles hold the facepiece in place while minimizing hair entanglement

Ultra-TwinA Respirators, Medium, Hycar Rubber, Lens Material Polycarbonate, Large chin cup makes it easy to position, Five suspension headstraps and roller buckles hold the facepiece in place while minimizing hair entanglement

Accessories. Accessories for Advantage® 1000 RCA Gas Masks, MSA - 454-816137, Clear Spectacle Kit, includes Rubber Guide, Metal Frame Spectacles, Wire Support

Comfo® Respirator Cartridges, MSA - 454-815180, P100 Cartridge/Filter

Comfo® Respirator Cartridges, MSA - 454-815178, P100 Cartridge/Filter

Advantage® 1000 RCA Gas Masks, MSA - 454-813860, Small, P100 Dual Cartridge Full Facepiece Respirator

Comfo® Classic Respirators, MSA. Comfo® Reusable Half Mask Respirators, MSA - 454-808076, Large, Dual Cartridge Respirator

Comfo® Classic Respirators, MSA. Comfo® Reusable Half Mask Respirators, MSA - 454-808075, Small, Dual Cartridge Respirator

Comfo Classic® Respirators, MSA. Comfo Classic® Reusable Half Mask Respirators, MSA - 454-808072, Small, Dual Cartridge Respirator, Silicone

Advantage® 1000 Facepieces, MSA - 454-805420, Large, Full Facepiece Air Purifying Respirator (APR)

Twin-Cartridge Adapter for Ultravue and Ultra Elite Facepieces, MSA - 454-803622, Twin-Cartridge Adapter, Plastic

Comfo® Respirator Cartridges, MSA - 454-492790, R95, N95 Cartridge

Comfo® Reusable Snap-On Covers, MSA - 454-489353, Comfo® reusable snap-on covers

Air-Supply Hose, MSA - 454-481080, 50 IN. L×0.375 IN. I.D., Air-Supply Hose

Respirator. Ultra-Twin Respirators, Inturned lip aroudn the edge for secure, comfortable seal against the face, Five suspension headstraps and roller buckles hold the facepiece in place while minimizing hair entanglement, Size Group : Large, Body Material : Silicone, Color : Black

Clip-On Welders Adapter withCover Lenses, MSA - 454-472859

Ultra-Twin® Respirators, MSA - 454-471310, Large, Dual Cartridge, Full Facepiece Respirator

Ultra-Twin® Respirators, MSA - 454-471298, Small, Dual Cartridge, Full Facepiece Respirator

Comfo® Respirator Cartridges, MSA - 454-464046, R95, N95 Cartridge

Comfo® Respirator Cartridges, MSA - 454-464033, R95, N95 Cartridge/Filter

Comfo® Respirator Cartridges, MSA - 454-464032, R95, N95 Cartridge/Filter

Comfo® Respirator Cartridges, MSA - 454-464031, R95, N95 Cartridge

Full Facepiece Respirator Cover Lenses, MSA - 454-456975, Clear Respirator Cover Lenses

Advantage® 420 Series Half-Mask Respirators, MSA. Advantage® 420 Series Reusable Half Mask Respirators, MSA - 454-10102184, Large

Advantage® 400 Series Half-Mask Respirators, MSA. Advantage® 400 Series Reusable Half Mask Respirators, MSA - 454-10102183, Medium

Advantage® 420 Series Half-Mask Respirators, MSA. Advantage® 420 Series Reusable Half Mask Respirators, MSA - 454-10102182, Small

Clip-On Welders Adapter, MSA - 454-10077063

Auto Changeâ„¢ Electronic Welding Lens, MSA - 454-10068601

Advantage® 3000 Full Facepiece Respirators, MSA. Advantage® 3000 Respirators, MSA - 454-10028995, Medium, Full Facepiece Respirator

Carry-Air with CO Monitor Systems, Allegro® - 037-9878, 8 Worker System

Carry-Air with CO Monitor Systems, Allegro® - 037-9872, 2 Worker System

Heavy-Duty SCBA Wall Cases, for Single SCBA, Allegro® - 037-4150, Wall Mounted Case for SCBA

Advantage® 200 LS Facepieces, MSA - 454-815448, Small, Air Purifying Half Facepiece Respirator (APR)

Advantage® Respirator Cartridges, MSA - 454-815368, Mersorb P100 Cartridge

Advantage® Respirator Cartridges, MSA - 454-815362, GMA P100 Cartridge

Advantage® Respirator Cartridges, MSA - 454-815359, GME Cartridge

Advantage® Respirator Cartridges, MSA - 454-815355, GMA N95, R95 Cartridge

Advantage® 1000 Facepieces, MSA - 454-805414, Small, Full Facepiece Air Purifying Respirator (APR)

Advantage® 1000 Facepieces, MSA - 454-805408, Medium, Full Facepiece Air Purifying Respirator (APR)

Bitrex Qualitative Fit-Test Kits, MSA - 454-697444, Bitrex Qualitative Fit-Test Kits, 0.03 lbs.

Advantage® 3200 Twin Port Respirators, MSA - 454-10031341, Large, Full Facepiece Respirator

Advantage® 3200 Twin Port Respirators, MSA - 454-10031340, Small, Full Facepiece Respirator

Advantage® 3200 Twin Port Respirators, MSA - 454-10031309, Medium, Full Facepiece Respirator

Air Supplied Replacement Parts, Allegro® - 037-9700-02, Exhaust Filter Element

Air Supplied Replacement Parts, Allegro® - 037-9700-01, Inlet Filter Element

Full Mask Low Pressure System, Allegro® - 037-9200-01, Full Mask Low Pressure System

Fit-Check Banana Oil Ampules, Allegro® - 037-0201, Fit-Check Banana Oil Ampules

Comfo® Respirator Cartridges, MSA - 454-815182, P100 Cartridge/Filter

Comfo® Respirator Cartridges, MSA - 454-815177, P100 Cartridge/Filter

Comfo Classic® Respirators, MSA. Comfo Classic® Reusable Half Mask Respirators, MSA - 454-808074, Medium, Dual Cartridge Respirator, Hycar™ Rubber

Comfo Classic® Respirators, MSA. Comfo Classic® Reusable Half Mask Respirators, MSA - 454-808073, Large, Dual Cartridge Respirator, Silicone

Comfo Classic® Respirators, MSA. Comfo Classic® Reusable Half Mask Respirators, MSA - 454-808071, Medium, Dual Cartridge Respirator, Silicone

W65 Self-Rescuer Respirators, Carbon Monoxide, MSA - 454-455299, Self-Rescue Respirator, with Protective Steel Case

(2Ea/Pkg) Filter Flexi Advanta. Msa 454-818343 (2ea/pkg) filter flexi advantage p100/ov/o3

2/Pk Filter Flexi Advantage P1. Msa 454-818342 2/pk filter flexi advantage p100

Advantage 200 Half Facerespira. Msa 454-815700 advantage 200 half facerespirator large

Advantage 200 Half Facerespira. Msa 454-815692 advantage 200 half facerespirator medium

Adv.200 Facepiece Assemb. Msa 454-815452 adv.200 facepiece assemb

Adv. 200 Facepiece Assem. Msa 454-815444 adv. 200 facepiece assem

Advantage Respirator Cartridge. Msa 454-815369 advantage respirator cartridge micro low p100

Gme-P100 Cartridge. Msa 454-815366 gme-p100 cartridge

Alcohol Free Cleaning Towelett. Allegro 037-3001 alcohol free cleaning towelette 100/box

Cleaning Towelette100/Box. Allegro 037-1001 cleaning towelette100/box

Isotherm replacement outer vest. Size large, flame retardant

Cool Vest Replacement Packs. Set of two Isotherm Cool Vest replacement packs

Cool Vest. Isotherm Dool Vest complete with outer vest and two packs. Flame retardant. Large.

Coiled Hose. A 50 foot coiled hose with a Snap-titpe QD coupler and nipple.

Coiled Hose. A 50 foot coiled hose with a Schrader QD coupler and nipple.

Coiled Hose. A 50 foot coiled hose with an Industrial Interchange QD coupler and nipple.

Coiled Hose. A 25 foot coiled hose with a Snap-Tite QD coupler and nipple.

Coiled Hose. A 25 foot coiled hose with a Schrader QD coupler and nipple.

Coiled Hose. A 25 foot coiled hose with an Industrial Interchange QD and nipple.

Extension Inlet Kit. For use with Bullard Free Air Pumps to remote inlet from pump, contains parts to plumb into pump and accept remote filter, use one V50IN and up to 5 V50EX (16006-400) to remote inlet up to 300 feet.

Extension Inlet Kit. For use with Bullard Free Air Pumps to remote inlet from pump, up to five can be used with one V50IN (16006-402).

Breathing Tube. Constant Flow Breathing Tube Assembly for Bullard Hoods including breathing tube, 1/2in. Industrial Interchange fitting, nylon belt, and clamp for use with Bullard Free Air systems.

Breathing Tube. Constant Flow Breathing Tube Assembly for Bullard Hoods including breathing tube, 1/4in. Snap Tite brass fitting, nylon belt, and clamp for use with compressed air systems.

Breathing Tube. Constant Flow Breathing Tube Assembly for Bullard Hoods including breathing tube, 1/4in. Snap Tite steel fitting, nylon belt, and clamp for use with compressed air systems.

Breathing Tube. Constant Flow Breathing Tube Assembly for Bullard Hoods including breathing tube, 1/4in. Schraeder fitting, nylon belt, and clamp for use with compressed air systems.

Breathing Tube. Constant Flow Breathing Tube Assembly for Bullard Hoods including 20BT (16006-030) breathing tube, 1/4in. Industrial Interchange (Hansen compatible) fitting, nylon belt, and clamp for use with compressed air systems.

Coupler Interchange. Industrial Interchange coupler with V12 (16006-362) adapter.

Coupler Splitter/Adapter. Bullard Free Air pump adaptor coupler converts a single outlet into a double 1/2in. female Industrial Interchange coupler.

Quick-Disconnect Adapter. Bullard Free Air pump adaptor coupler converts a single outlet into a single 3/8in. female NPT for connecting respirators with 3.8in. Hose.

Adapter Coupler. Bullard Free Air pump adaptor coupler converts a single outlet into a double 3/8in female NPT for connecting respirators with 3.8in. Hose.

Hose Interchange. Hose assembly which is designed to be used with Bullard Free-Air Pumps. This assembly includes either a 100 ft. section of hose and a 1/2in. Industrial Interchange quick-disconnect coupler and nipple.

Hose Interchange. Hose assembly which is designed to be used with Bullard Free-Air Pumps. This assembly includes either a 50 ft. section of hose and a 1/2in. Industrial Interchange quick-disconnect coupler and nipple.

Snap-Tite Female Coupler. A 1/4in. Snap-Tite quick-disconnect coupler that includes shut-off with 1/4in. female pipe thread (NPT). A V12 (16006-362) hose to pipe adaptor required to connect to Bullard V10 extension hose.

Schrader Coupler. A 1/4in. Schrader quick-disconnect coupler which includes a shut-off with 1/4in. female pipe thread (NPT). A V12 (16006-362) hose to pipe adaptor required to connect to Bullard V10 extension hose.

Nipple Interchange. A 1/4in. Industrial Interchange (Hansen compatible) steel male quick-disconnect nipple with 3/8in. female pipe thread (NPT) and requires V13 (16006-364) hose adapter to connect to Bullard V10 air supply hose.

Female Coupler. A 1/4in. industrial interchange (Hansen compatible) quick-disconnect coupler that includes a shut-off with 3/8in. male pipe thread (NPT).

Female Coupler. A 1/4in. industrial interchange (Hansen compatible) quick-disconnect coupler that includes shut-off with 1/4in. female pipe thread (NPT). A V12 (16006-362) hose to pipe adaptor required to connect to V10 extension hose.

Hose Adapter. A 3/8in. hose to 3/8in. pipe adapter, brass.

Pipe Adapter. A 3/8in. hose to 1/4in. pipe adapter, brass.

Hose Adapter. A 3/8in. hose to 3/8in. hose adapter, brass.

Valve Kit. (Specivk) Replacement Inhalation Valve Kit For Bullard Spectrum Series Respirators.

Facepiece. (Speccfs) Spectrum Small Facepiece Assembly For Use With Spectrum Constant Flow Respirators Complete With Facepiece, Lens, Head Straps, Exhalation Valve, And Facepiece Components.

Facepiece. (Speccfml) Spectrum Medium/Large Facepiece Assembly For Use With Spectrum Constant Flow Respirators Complete With Facepiece, Lens, Head Straps, Exhalation Valve, And Facepiece Components.

Spectrum Respiratro. BullardGs Spectrum CF provides a durable, cost-effective and comfortable means of protection in general purpose non-IDLH applications, including painting, pharmaceutical manufacturing and chemical handling.

Spectrum Respirator. BullardGs Spectrum CF provides a durable, cost-effective and comfortable means of protection in general purpose non-IDLH applications, including painting, pharmaceutical manufacturing and chemical handling.

Replacement Speaker/Exhalation Kit. (Sek) For Bullard Spectrum Series Respirator.

Quick Disconnect. A 1/4in. Snap-Tite steel male quick-disconnect nipple with 1/4in. female pipe thread (NPT) and requires a V12(16006-362) hose adapter to connect to Bullard V10 air supply hose.

Quick Disconnect. A 1/4in. Schrader steel male quick-disconnect nipple with 4in. female pipe thread (NPT) and requires a V12(16006-362) hose adapter to connect to Bullard V10 air supply hose.

Cleaning Solution. Cleaning solvent for use with Bullard Free Air pumps.

Replacement Filter. Replacement outlet filter for Bullard Free Air Pumps.

Disconnect Coupler. Quick Disconnect Coupler for use with Bullard Free Air Pumps, 1/2in. Industrial Interchange fitting - flow through with 3/4in NPT.

Diconnect Coupler. Quick Disconnect Coupler for use with Bullard Free Air Pumps, 1/2in. industrial interchange fitting - shut off.

Breathing Tube. (Rtbt) Replacement Breathing Tube For Bullard Rt Respirator System Complete With Clamp.

Hood Tychem. Hood with oversized lens and long inner and outer bib offers an inflatable neck cuff design for a positive custom seal around neck. Air is directed through a three-channel system to help promote curvature of the hood for a better fit users head.

Replacement Lens. (Rls) For Bullard Spectrum Series Respirators.

Spectacle Frame. (Pl) Spectacle Frame Assembly For Use With Bullard Spectrum Series Respirators.

Breathing Tube. Breathing tube assembly designed to work with Bullard PA40 Series Respirator. It is 33in. in length with a swivel elbow connection.

Breathing Tube. 22in. breathing tube for use with our loose fitting facepiece in conjunction with the PA20 & PA30 Series PAPR's.

Breathing Tube. 26in. length breathing tube for use with our loose fitting facepiece in conjunction with the PA20 & PA30 Series PAPR's.

Bullard Tube. Breathing tube for Bullard 20LFL (16006-036) and 20LFM (16006-038) respirators, extra short length.

ASSEMBLY HC2400 MUFFLER/VALVE - MV2400

Mask Cover. (Mck)

Nose Cup. (Lnk)

Lens Clamp Replacement Kit. (Lck)

Lens Covers Mylar. (Lc)

Head Strap. (Hsk) Replacement Head Strap Kit For Bullard Spectrum Series Respirators.

Heat Shield. (Hs) Heat Shield To Be Used With Bullard'S Ac1000 (16006-006) And Hc2400 (16006-182) Climate Control Devices To Protect The Wearer From Hot Air Exhaust.

Climate Control Device. Climate control device that allows the wearer to switch ends to either heat or cool the compressed air coming into the respirator

Cool Tube Assembly. Offers a cooling feature. Desigend specifically to work with our Bullard Free-Air Pumps (ADP20 (16006-072) and EDP30 Models ONLY).The assembly includes a 1/2in quick-disconnect nipple, adjustable temperature control and nylon belt.

Flange. (Fks) Replacement Flange For Bullard Small Spectrum Series Pressure Demand Respirator.

Flow Control Valve. Adjustable flow control valve for CC20 (16006-102-18)series respirators with 1/4in industrial interchange (Hansen compatible) fitting.

Flow Control Valve. Constant flow control valve for CC20 (16006-102-18) series respirators with 1/4in bayonet style fitting.

Flow Control Valve. Constant flow control valve for CC20 (16006-102-18) series respirators with 1/2in industrial interchange fitting for use with Bullard Free Air Pump systems.

Flow Valve. Constant flow control valve for CC20 (16006-102-18) series respirators with 1/4in industrial interchange (Hansen compatible) fitting.

Exhalation Valve. (Evo) Replacement Exhalation Valve Seat And O-Ring For Use With Bullard Spectrum Series Pressure Demand Respirators.

Air Pump. Supplies air for one continuous flow hood/helmet style respirator or two tight-fitting facepiece style respirators approved to operate at 15 psig or less.

Cooling Vest. Extra Large/XX-Large cooling vest for Bullard cooling systems.

Cooling Vest. Medium/large cooling vest for Bullard cooling systems.

Cooling System. A unique cooling system that supplies air to a Bullard CC20 (16006-102-18), 88VX, or GR50 respirator system and to a cooling vest from a single airline source.

Connector Hose. Replacement connector hose for Bullard Dual Cool system.

Connector Hose. Replacement connector hose for Bullard AC1000DC (16006-068) cooling system.

Supplied Air Respirators. Includes all of the basic features, with the exception of the inner bib, come complete with hood, headband, breathing tube, and 1/2in industrial interchange fitting for use with Bullard free air pumps.

Supplied Air Respirator. Iincludes all of the basic features, with the exception of the inner bib, come complete with hood, headband, breathing tube, and 1/4in. industrial interchange fitting.

Respirator. Made from Tyvek QC, includes an inner bib and accommodates a hard hat for jobs that require head protection, comes complete with hood, breathing tube, and 1/4in industrial intechange fitting.

Respirator. Model is made from Tyvek QC and includes an inner bib to help keep the hood stable on the userGs shoulders during work operations, for use with Bullard free air pump systems complete with hood, headband breathing tube and 1/2in. industrial interchange fitting.

Respirator. Model is made from Tyvek QC and includes an inner bib to help keep the hood stable on the userGs shoulders during work operations, for use with compressed air systems complete with hood, headband breathing tube and 1/4in industrial interchange fitting

Anti-fog Wipes. Lens wipes for use on the Spectrum Series Respirator.

Air Pumt. Air driven, oil-less air pump which supplies air to 4 hood-style respirators or 6 half or full face mask respirators without the need for an inline CO monitor.

Cool Tube Component. The AC1000DC is the cool tube component of a unique cooling system that when used with a DC70 cooling vest allows cool air to be passed across the workers torso, not a respirator.

Flow Control Device. Air conditioning flow control device to be used with most Bullard respirators, will cool incoming compressed air up to 30 degrees with ability for temperature adjustment.

Tychem QC Respirator Hood. For areas that do not require an inner bib and/or need a more economical solution, replacement hood, does not come with a headband.

QC Hood. Tychem QC Hoods with Taped and Sealed Seams, can be used with airline systems or Powered Air Purifying Respirator (PAPR) blower assemblies. Pk10

Tychem QC CC20 Hood. With taped and sealed seams where protection from splash/liquids is important, for use in pharmacuetical, painting, and general industry applications complete with headband.

Tychem QC CC20 Hood. for use in pharmacuetical, painting, and general industry applications, replacement hood, does not come with headband.

Tychem SL Saranex Coated CC20 Hood. For use in areas where chemical protection properites are critical and/or taped and sealed seams are desired, replacement hood does not come with headband.

Tychem SL Saranex Coated CC20 Hood. Hard hat version for use in areas where chemical protection properites are critical and/or taped and sealed seams are desired.

Tychem SL Saranex Coated CC20 Hood. For use in areas where chemical protection properites are critical and/or taped and sealed seams are desired, complete with headband

Loose Fitting Facepiece. Small/Medium size, used in a wide variety of applications including: Pharmaceutical Manufacturing, General Industry, General Maintenance, and Healthcare Workers. F&B's include: Soft Plenum Delivery System, Latex-free construction, built in suspension and wide angle lens.

Loose Fitting Facepiece. used in a wide variety of applications including: Pharmaceutical Manufacturing, General Industry, General Maintenance, and Healthcare Workers. F&B's include: Soft Plenum Delivery System, Latex-free construction, built in suspension and wide angle lens.

Breathing Tube. For use with Bullard LFL (16006-036) loose fitting respirators when used in supplied air mode

Lens Cover. For Bullard CC20 (16006-120--118) series respirator for use in paint applications and other enviroments where lens protection from work is required.

Breathing Tube. wire reinforced and crush proof for use with Bullard CC20 (16006-120--118) and RT (16006-300--312) style hoods.

O-ring. Replacement O-ring for outlet filter jar used on Bullard Free Air Pumps

Filter Jar. Replacement outlet filter jar for Bullard Free Air Pumps.

Hose Kit. 25 foot starter hose complete with 1/4 inch Snap Tite coupler and V13 hose to pipe adaptor (3/8in. hose to 3/8in. pipe) for use with compressed air systems, quick disconnect nipple sold seperately.

Outlet Filter Jar. For use on our Bullard Free-Air Pumps.

Vinyl Belt. Vinyl decon belt for use with Bullard PC90 (16006-274) series airline respirator.

Filter Inlet. Inlet filter for use with Bullard Free-Air Pumps.

Service Kit for Air Pumps. Service kit for Bullard EDP10 Series Free Air Pumps includes 4 carbon vanes, one 23611 inlet filter, and one S17101 outlet filter cartridge.

Exhalation Valve. Replacement for Spectrum Series continuous flow respirators (5 per package)

Hose Extention. 100 foot extension hose with V11 hose to hose adaptor and V13 hose to pipe adapter fitting (3/8in. hose to 3/8in. pipe) for use with compressed air systems

Extension Hose. 50 foot extension hose with V11 hose to hose adaptor and V13 hose to pipe adapter fitting (3/8in. hose to 3/8in. pipe) for use with compressed air systems

Extension Hose. 25 foot extension hose with V11 hose to hose adaptor and V13 hose to pipe adapter fitting (3/8in. hose to 3/8in. pipe) for use with compressed air systems.

Hose Kit. 25 foot starter hose complete with 1/4 inch Industrial Interchange coupler (Hansen compatible) and V13 hose to pipe adaptor (3/8in. hose to 3/8in. pipe) for use with compressed air systems, quick disconnect nipple sold seperately.

Nylon Belt. For use with Bullard supplied air CC20 (16006-102 through 16006-118) breathing tube assemblies in general industrial environments.

Fire Retardant Belt. Fire retardant belt for use with the Spectrum Series respirator.

Dielectric Nylon Bracket. Front mounting.

Anti-Glare Decal. (Ubg) Underbrim Green Decal To Reduce Glare.

Goggle Clips. Set of three self-adhesive goggle clips.

Sunshade. For Bullard cap style helmets

Hard Hat Sunshade. (Css) Cotton Neck Sunshade For Attachement On Hard Hats And Caps.

Browpad. Replacement Sportek browpad for Bullard 4pt suspensions.

Chinstrap. Nomex chinstrap for Bullard hard hats. Wildfire.

Chin Strap. Elastic chin strap for Bullard helmets.

Tychem QC Respirator Hood. For areas that do not require an inner bib and/or need a more economical solution.

Tychem QC Respirator Hood. For areas where head protection is required, accomodates several models of Bullard hard hats.

INDICATOR AIR FLOW - PA1AFI

Ratchet Suspension. For use with Bullard CC20 (16006-120--118) Series Hoods. Makes headband size adjustment easy.

Breathing Tube Clamps. Package of 10 breathing tube clamps for use with Bullard CC20/RT (16006-102-18) Series Hoods to connect the respirator hood to the breathing tube.

Gaskets. 4 pack of gaskets for use with PA20 & PA30 Series PAPR's to be used at breathing tube and filter connections on the blower units

TUBE BREATHING FOR TYC HOOD - PA1BT

Clear Lens Cover (25)

Cart, Comb0, Ov/P100, 84Pc

Backpack Adapter. For air-purifying facepieces.

X-plore® Air-Purifying Respirators, Draeger - 6738039, Filter Pad Base

Eye Glass Frame. Plastic. No Lenses. Fits 5400 or 7600 Series Full Facepiece.

7600 Series Full Facepiece. With North CF2007 airline adapter. Size: Small

Exhalation valve, Respiratory Protection System Component.

Rugged comfort Head harness assembly.

Quick Latch Head harness assembly.

Cartridge kit 7000/9000 series probed to quantatively fit test 7000/9000 respirators with portacount. Includes 2 probed cartridges (one for 7000, one for 9000), a pair of p100 filter disks (number 7940), one piggyback adaptor (number 7920) and instructions.

Filter 7000/9000 series pre-filter retainer to use with N95 particular pre-filter (number 8910) or R95 particulate pre-filter (number 8970).

Cartridge 7000/9000 series organic vapor cartridge. for oil-free paint sprays and pesticides use with N95 pre-filter retainer (number 8910) and pre-filter retainer (number 7020). for oil-based paint sprays and pesticides use with r95 pre-filter (number 8970) and pre-filter retainer.

Respirator7000 medium half mask pre-assembled with organic vapor cartridges.

Respirator 7000 small half mask pre-assembled with organic vapor cartridges.

Respirator 7000 small half mask pre-assembled for oil-free paint sprays and pesticides. includes 7000 facepiece, organic vapor cartridges (number 7100), n95 pre-filter (number 8910) and pre-filter retainer (number 7020).

Respirator 7000 large half mask respirator pre-assembled with organic vapor cartridges.

Respirator 7000 medium half mask pre-assembled for oil-free paint sprays and pesticides. includes 7000 facepiece, organic vapor cartridges (number 7100), n95 pre-filter (number 8910) and pre-filter retainer (number 7020).

Respirator 7000 large half mask pre-assembled for oil-free paint sprays and pesticides. includes 7000 facepiece, organic vapor cartridges (number 7100), n95 pre-filter (number 8910) and pre-filter retainer (number 7020).

Cartridge 7000/9000 series acid gas cartridges. niosh approved for chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen fluoride and hydrogen sulfide.

Cartridge 7000/9000 series organic vapor cartridge and p100 particulate filter disk stacked combo. includes ov cartridge (number 7100), piggyback adaptor (number 7920), and p100 particulate filter disk (number 7940).

Cartridge 7000/9000 series p100 particulate disk with niosh certified to have an efficiency level of 99.97% or greater against both oil and non-oil aerosols. for contaminants falling under an osha substance specific standard requiring a high efficiency particulate air (hepa) filter.

Small half mask Respirator pre-assembled with p100 filter disk. It includes 7000 facepiece and p100 filter disk (number7940) which is niosh certified to have a filter efficiency level of 99.97% or greater against oil and non-oil based particulate aerosols.

Medium half mask respirator pre-assembled with p100 filter disk. It includes 7000 facepiece and p100 filter disk (number7940) which is niosh certified to have a filter efficiency level of 99.97% or greater against oil and non-oil based particulate aerosols.

Large half mask respirator pre-assembled with p100 filter disk. It includes 7000 facepiece and p100 filter disk (number7940) which is niosh certified to have a filter efficiency level of 99.97% or greater against oil and non-oil based particulate aerosols.

P100 particulate disk with nuisance organic vapor. P100 7000/9000 series particulate disk with nuisance organic vapors. niosh certified to have an efficiency level of 99.97% or greater against both oil and non-oil aerosols.

Multi-gas/vapor cartridge, 7000/9000 series multi-gas/vapor cartridge and p100 particulate filter disk stacked combo. includes smart multi gas/vapor cartridge (number7100), piggyback adaptor (number7920), and p100 particulate filter disk (number7940).

Large half mask respirator pre-assembled. 7000 large half mask respirator pre-assembled with smart multi-gas/ vapor cartridge. includes 7000 facepiece and smart multi-gas /vapor cartridges (number7600) - niosh approved for organic vapors, ammonia

Head strap and assembly, 7000 series respirator and accessories.

Gasket, 7000 series gaskets replacement parts, for reusable respirator.

Diaphragm, 7000 series diaphragms replacement parts, for reusable respirator.

Medium/Large Nose Cup. Medium/large nose cup replacement part, 9000 series for reusable respirator

Faceshield Protector, 9000 series faceshield protector replacement part, for reusable respirator.

Head harness, 9000 series head harness preplacment part, for reusable respirator.

Spectacle Kit 9000 Series. Spectacle kit accesory to wear with corrective prescription lenses. 9000 series, do not wear with regular eyeglasses as these will cause the seal to be broken and prevent proper fit and protection.

Small Nose Cup, 9000 series small nose cup replacement part, for reusable respirator.

Formaldehyde Cartridge7000/9000 series. OSHA regulations require gas-proof goggles, 100% PVC-Free, Use with number8910 N95 or number8940 P100 filters against particulates.

Half mask respirator pre-assembled 7000 medium. With smart multi-gas/ vapor cartridge, includes 7000 facepiece and smart multi-gas /vapor cartridges (number7600) - niosh approved for organic vapors, ammonia, methylamine, chlorine dioxide, hydrogen fluoride, formaldehyde, and hydrogen sulfide.

Small 7000 half mask respirator pre-assembled. With smart multi-gas/ vapor cartridge, includes 7000 facepiece and smart multi-gas /vapor cartridges (number7600) - niosh approved for organic vapors, ammonia, methylamine, chlorine dioxide, hydrogen fluoride, formaldehyde, and hydrogen sulfide.

Breathing tube powered air hood.

Blower decon belt eva battery.

Breathing tube for t series hoods- extra long length.

Air Flow Indicator TR-971, Versaflo, for TR-600 PAPR, 1/case.

Filter Cover TR-6800FC / 37378 (AAD), Versaflo, for TR-6820N Filter, 1/case.

Filter Cover TR-6700FC / 37356 (AAD), Versaflo, for TR-6710N Filter, 1/case.

Spark Arrestor TR-662, Versaflo, for TR-600/800 PAPR, 2/case.

Prefilter TR-6600 / 37354 (AAD), Versaflo, for TR-600 PAPR, 50/case.

Back Pack Adaptor TR-655 / 37385 (AAD), Versaflo, for TR-600/800 PAPR, 1/case.

Cleaning and Storage Kit TR-653 / 37373 (AAD), Versaflo, for TR-600/800 PAPR, 1/case.

Filter Cover TR-6500FC, Versaflo, for TR-6500 Series Cartridges, 1/case.

4-Station Battery Charger Kit TR-644 / 37351 (AAD), Versaflo, 1/case.

Single Station Battery Charger Kit TR-641/37350 (AAD), Versaflo, 1/case.

Organic Vapor/Acid Gas/HEPA Cartridge TR-6530N, Versaflo, for TR-600/800 PAPR 5/case.

Organic Vapor/HEPA Cartridge TR-6510N / 37361 (AAD), Versaflo, for TR-600/800 PAPR 5/case.

HEPA and Nuisance OV/AG Filter TR-6820N / 37360(AAD), Versaflo, for TR-600 PAPR 5/case.

Battery Charger Cradle TR-640, Versaflo, for TR-600/800 Series PAPR, 1/case.

High Capacity Battery TR-632 / 37348(AAD), Versaflo, for TR-600 PAPR 1/case.

Filter Cover TR-6300FC / 37380 (AAD), Versaflo, for TR-6300 Series Cartridges 1/case.

Standard Battery TR-630/37347(AAD), Versaflo, for TR-600 PAPR 1/case.

Belt Extender TR-627X / 37346(AAD), Versaflo, for TR-627 Easy Clean Belt 1/case.

Easy Clean Belt TR-627/37345(AAD), Versaflo, for TR-600/800 PAPR 1/case.

Belt Extender TR-626X, Versaflo, for TR-626 High Durability Belt 1/case.

High Durability Belt TR-626, Versaflo, for TR-600/800 PAPR 1/case.

Formaldehyde/HEPA Cartridge TR-6350N, Versaflo, for TR-600/800 PAPR 5/case.

Ammonia/Methylamine/HEPA Cartridge TR-6360N, Versaflo, for TR-600/800 PAPR 5/case.

Acid Gas/HEPA Cartridge TR-6320N, Versaflo, for TR-600/800 PAPR 5/case.

TR-614N PAPR Assembly Versaflo, (TR-602 Motor/Blower, TR-630 Standard Battery, BT-30 Breathing Tube, TR-627 Easy Clean Belt, TR-971 Airflow Indicator), 1/case

TR-613N PAPR Assembly Versaflo, (TR-602 Motor/Blower, TR-630 Standard Battery, BT-30 Breathing Tube, TR-626 High Durability Belt, TR-971 Airflow Indicator), 1/case

Powered Air Purifying Respirator Unit TR-602N, Versaflo, 1/case.

High Efficiency Filter TR-6710N / 37358(AAD), Versaflo, for TR-600 PAPR, 40/case.

High Efficiency Filter TR-6710N / 37357(AAD), Versaflo, for TR-600 PAPR, 5/case.

Kit, TR-600-ECK Easy Clean PAPR. Easy Clean PAPR Kit TR-600-ECK, Versaflo, For environments where it is critical for the system to be easily cleaned, features S-433 Hood Assembly, TR-3710N High Efficiency Particulate Filter, TR-330 Standard Battery, 1/case

Kit, TR-600-HIK PAPR. Heavy Industry TR-600-HIK PAPR Kit, Versaflo, For rugged operations such as industrial, demolition, grinding, metal finishing and casting, features M-307 Hard Hat Assembly Headtop, TR-6530N Combination Cartridge (HE/OV/AG), TR-632 High Capacity Battery 1/case

TR-617N PAPR Assembly. TR-617N/37342 (AAD) PAPR Assembly, Versaflo(TR-632 High capacity Battery, BT-30 Length Adjusting Breathing Tube, TR-627 Easy Clean Belt), 1/case

TR-616N PAPR Assembly, Versaflo(TR-632 High capacity Battery, BT-30 Breathing Tube, TR-626 High durability Belt), 1/case

Nose Cup Valve Assembly 7882, Respiratory Protection Replacement Part, 20CS.

Category