• 0
Shop Products $

Breathing Tube. This tube is part of the 3M Back-Mounted Adapter Kit SA-2000LP (56222-876) (low pressure).

Breathing Tube. Combination dual airline back-mounted breathing tube. Used on both the high and low pressure 3M back-mounted combination kits.

Dual Airline Supplied Air Respirator Adapter Kit. Back-mounted. Use with 3M 6000 series half-masks and full facepieces and 7800S series full facepieces. High-pressure regulator. Negative and positive pressure capability. NIOSH approved. With combination breathing tube, web belt, and air regulator.

Dual Airline Supplied Air Respirator Adapter Kit. Back-mounted. Use with 3M 6000 series half-masks and full facepieces and 7800S series full facepieces. Low-pressure regulator. Negative and positive pressure capability. NIOSH approved. With combination breathing tube, web belt, and air regulator.

Bayonet Cap. Use to close the bayonet attachments on 3M Full Facepieces and 3M Combination Dual Airline Breathing Tubes.

Quantitative Fit Testing Respirator. Small. For quantitative face-fit testing to ensure proper worker protection. 3M 6000 series facepiece with testing probe. Helps meet OSHA guidelines for respiratory protection by ensuring proper fit. This product is not to be used for respiratory protection.

Quantitative Fit Testing Respirator. Medium. For quantitative face-fit testing to ensure proper worker protection. 3M 6000 series facepiece with testing probe. Helps meet OSHA guidelines for respiratory protection by ensuring proper fit. This product is not to be used for respiratory protection.

Quantitative Fit Testing Respirator. Large. For quantitative face-fit testing to ensure proper worker protection. 3M 6000 series facepiece with testing probe. Helps meet OSHA guidelines for respiratory protection by ensuring proper fit. This product is not to be used for respiratory protection.

6000 Series Cartridge. For use with 3M 6000 series respirator facepieces. Two organic vapor cartridges per pack. NIOSH approved for use against organic vapors.

6000 Series Cartridge. For use with 3M 6000 and 7000 series respirator facepieces. Two ammonia/methylamine cartridges per pack. NIOSH approved for use against ammonia/methylamine.

P100 Any Particulates Filter. Approved for use against any particulates. 99.97% minimum filter efficiency. Meets 42 CFR 84 requirements when used with North Safety air purifying dual cartridge respirators. NIOSH approved.

N95 Particulate Filter. Approved for use against non-oil particulates. 95% minimum filter efficiency. Meets 42 CFR 84 requirements when used with North Safety air purifying dual cartridge respirators. NIOSH approved.

N95 Dust Filter Assembly. Approved for use against non-oil particulates. 95% minimum filter efficiency. Meets 42 CFR 84 requirements when used with North Safety air purifying dual cartridge respirators. NIOSH approved.

Organic Vapor/Acid Gas Cartridge with P100 Filter. For organic vapor, chlorine, hydrogen chloride/fluoride, sulfur dioxide, chlorine dioxide, any particulates. 99.97% filter efficiency. Meets 42 CFR 84 requirements when used with North Safety air purifying dual cartridge respirators. NIOSH approved.

Filter Pack. Filters are for use with the North Safety Low Maintenance Half-Mask Respirator. Ideal for welding. NIOSH 42 CFR 84 approved for use against non-oil particulates. 99% minimum filter efficiency.

Coupler for 9.5mm ID Hose. Coupler is for use with the North Safety airline hood and full facepiece respirators.

Respirator Wipes. Designed to help ensure cleanliness, safety, and security while using respirators. Wipes keep face masks clean. Great for removing perspiration and body oils without harming the facepiece itself.

Gasket. Full facepiece replacement part for the North Safety 7700 series and 7600 series air purifying respirators.

Pancake P100 Any Particulates Filter. Approved for use against any particulates. 99.97% minimum filter efficiency. Meets 42 CFR 84 requirements when used with North Safety air purifying dual cartridge respirators. NIOSH approved.

Adapter. For North 75FFP100 filter. Attaches filter to chemical cartridges (except for Defender cartridge).

7600 Series Full Facepiece. With North CF2007 airline adapter. Size: Med/Large.

Airline Adapter. Convert North air-purifying facepieces to supplied air. Includes breathing tube, waist belt and adjustable flow control valve.

Breathing Tube. Replacement for North CF2007 airline adapter.

Air Flow Valve. Replacement for North CF2007 airline adapter.

Waist Belt. Replacement for North CF2007 airline adapter.

Accessories for PELTORâ„¢ Optimeâ„¢ Series Earmuffs, 3M - 7000009662, Earmuff replacement hygiene kit Peltorâ„¢ HY7

FACE SHIELD COVER RESP PK25 - 7100138628

Exhalation Valver. Valve is for use with the 3M 6000 Series Full Facepiece Respirator.

Inhalation Valve. Valve is for use with the 3M 6000 Series Full Facepiece Respirator.

6000 Series Cartridge with Stacked P100 Filter. Organic vapors/P100 cartridge. For use with 3M 6000 series respirator facepieces. NIOSH approved P100 filter is permanently attached. Meets NIOSH 42 CFR 84 standards. Approved for use against certain organic vapors and particles.

6000 Series Cartridge with Stacked P100 Filter. Certain organic vapors/acid gas/P100 cartridge. Use with 3M 6000 respirator. Meets NIOSH 42 CFR 84 standards. For use against certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, hydrogen fluoride, hydrogen sulfide (escape only), and particles.

6000 Series Cartridge with Stacked P100 Filter. Acid gas/P100 cartridge. Use with 3M 6000 respirators. NIOSH approved filter is attached. Meets NIOSH 42 CFR 84 standards. Approved for use against chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide (escape only), and particles.

6000 Series Cartridge with Stacked P100 Filter. Formaldehyde/certain organic vapors/P100 cartridge. For use with 3M 6000 series respirator facepieces. Filter is permanently attached. Meets NIOSH 42 CFR 84 standards. Approved for use against formaldehyde, certain organic vapors, and particles.

6000 Series Cartridge with Stacked P100 Filter. Ammonia/methylamine/P100 cartridge. For use with 3M 6000 series respirator facepieces. NIOSH approved P100 filter is permanently attached. Meets NIOSH 42 CFR 84 standards. Approved for use against ammonia, methylamine, and particles.

P100 Filter. Provides relief from nuisance odors generated from chlorine, sulfur dioxide, and hydrogen fluoride. 99.97% efficient at removing solid and liquid particles including those containing oil. Use with 3M 5000, 6000, and 7000 series respirators. NIOSH 42 CFR 84 approved.

P100 Filter. Removes organic vapor odors below the OSHA PEL. 99.97% efficient at removing solid and liquid particles including those containing oil. Use with 3M 5000, 6000, and 7000 series respirators. NIOSH 42 CFR 84 approved.

Straight Air Supply Hose. For L-Series positive pressure headgear. Low pressure systems. 12.7mmID, 7.6m long.

Straight Air Supply Hose. For L-Series positive pressure headgear. Low pressure systems. 12.7mmID, 15.2m long.

Straight Air Supply Hose. For L-Series positive pressure headgear. Low pressure systems. 12.7mmID, 30.5m long.

High Pressure Air Hose. Can be used on 3M High Pressure Compressed Air Systems. It has a 3/8 inch inner diameter and is equipped with MPT on both ends to accept 1/4 inch FPT fittings. Coiled hoses should be used in single length only. They cannot be combined.

High Pressure Air Hose. Can be used on 3M High Pressure Compressed Air Systems. It has a 3/8 inch inner diameter and is equipped with MPT on both ends to accept 1/4 inch FPT fittings. Coiled hoses should be used in single length only. They cannot be combined.

High Pressure Air Hose. Can be used on 3M High Pressure Compressed Air Systems. It has a 3/8 inch inner diameter and is equipped with MPT on both ends to accept 1/4 inch FPT fittings. Coiled hoses should be used in single length only. They cannot be combined.

Fully Disposable Tyvek Hood with Low Pressure Flow Adaptation. One-piece construction. Breathing tube and head suspension integrated with hood assembly. Fully disposable, eliminating need for decontamination. Flexible and splash resistant. Ideal for workers with beards or goggles.

Adjustable Flow Control Valve, Allegro - 9992

Personal Air Cooler with Belt. Ideal in hot environments, adjusting the air flow from high pressure air sources as low as 25 degrees colder than ambient air for an improved working environment. Requires an air supply pressure range of 55-85psig.

Half Facepiece Replacement. Use as a replacement part for 3M Half Facepieces 6000 Series.

Air Panel. 3M Air Panels are used to filter and regulate plant supplied air. Offers carbon monoxide (CO) filtration and monitoring.

Breathe Easy Powered Air Purifying Respirator (PAPR) HEPA Cartridges. For use with Breathe Easy Turbo Assembly 56221-894. Protect against gases, vapors, or particulates. NIOSH approved.

HEPA Filter. Used on 3M Powerflow Systems for protection against high efficiency particulates.

Organic Vapor/Chlorine/Hydrogen Chloride/Sulfur Dioxide/High Efficiency Cartridge. AEP3. Used for protection against organic vapors, chlorine, hydrogen chloride, sulfur dioxide and high efficiency particulates. For use with the Breathe Easy Belt-Mounted Powered Air Purifying Respirators (PAPRs).

Breathe Easy Powered Air Purifying Respirator (PAPR) Acid Gas/HEPA Cartridges. For use with Breathe Easy Turbo Assembly 56221-892. Protect against gases, vapors, or particulates. NIOSH approved.

Breathe Easy Powered Air Purifying Respirator (PAPR) Breathing Tube. 91cm long. Compatible with Breathe Easy hoods. Use with Breathe Easy cartridge, turbo assembly, and hood to provide comfortable and efficient powered air protection. NIOSH approved.

Airflow Indicator. Used to indicate the airflow rate on 3M Breathe Easy and Powerflow Systems.

Replacement Filter Kit. Used with the 3M Portable Compressed Air Filter and Regulator Panel 67100-102.

Replacement Filter. Used with 3M Portable Compressed Air Filter and Regulator Panel 67101-368.

Sweat Pad. Used on the 3M L-Series Headgear, H-Series Hood, Whitecap Helmets and Hardcap Assembly. The sweat pad attaches to the headband in the area of the user's forehead. It helps absorb perspiration and adds to the overall comfort of the user.

Vortex Cooling Tube. This tube is the component of the 3M Vortex Cooling Assembly V-100 (67100-644). It helps keep the worker comfortable by cooling the air by up to 50-F (28-C) before it gets to the worker's breathing area.

VORTEX COOLING SYSTEM CS1 - 7100077598

Vortex Muffler Kit. This kit is a component of 3M Vortex Cooling Assemblies V-100 (67100-644) and V-100SS (67100-646). It includes a retainer that holds it in place in the assembly.

Vortemp Heating Assembly. For L-Series Positive Pressure Headgear, high pressure systems. Regulate airflow and warm air by as much as 10[degree]C.

Vortemp Muffler. This kit is a component of 3M Vortemp Heating Assemblies V-200 and V-200SS, V-300, V-300SS and V-400. It includes a retainer that holds it in place in the assembly.

Vortemp Heating Tube. This tube is a component of the 3M Vortemp Heating Assembly V-200 (67100-680). It connects directly to the supplied air system and heats the air before it gets to the worker's breathing area.

Air Regulating Valve Assembly. For L-Series Positive Pressure Headgear, high pressure systems. Regulate airflow to the headgear.

Air Regulating Valve. This valve is the main component of the 3M Air Regulating Valve Assembly V-300 (67100-694). It includes all the components necessary to regulate the airflow to the worker.

Low Pressure Assembly. For L-Series Positive Pressure Headgear, low pressure systems. Adapter regulates the airflow to the headgear.

Vortex Spare Parts Kit. This kit has the necessary items to maintain the 3M Vortex Cooling Assembly V-100 (67100-644). Includes o-rings, special washer, generator, screws, lock washer and foam pad and fastener.

Full Facepiece. Use with 3M Filters 2000 Series, 3M Filter 7093, P100, 3M Cartridges 6000 Series and powered or supplied air systems against a variety of gases, vapors and particulate hazards according to NIOSH approvals.

Bitter Sensitivity Solution. Used to test the sensitivity of the respirator wearer to a bitter solution. It is used with the 3M Qualitative Fit Test Apparatus 67100-854.

Bitter Fit Test Solution. Used with the 3M Qualitative Fit Test Apparatus 6710-854 to test the face to facepiece seal.

Nose Cup Assembly. Use as a replacement part for 3M Full Facepieces 56621-876, 56621-878, 56612-880.

Air Regulator Valve Kit. Used for continuous flow on 3M 6000/6000DIN and 7000 Series Full Facepieces. This assembly includes one of each of the following: air regulating valve, airline adapter, breathing tube, waist belt, shoulder strap, full face plug.

Qualitative Fit Test Apparatus. For particulate respirator or gas/vapor respirator with particulate prefilter. Contains: hood, collar assembly, sensitivity and fit test nebulizers, 2 spare nebulizer inserts, sensitivity and fit test solutions, and instruction booklet. Meets OSHA 29 CFR 1910.134.

Nose Cup. Replacement nose cup for 3M Full Facepieces 7000 Series.

Category