• 0
Shop Products $

Full Facepiece Lens. Replacement part for 3M Full Facepieces 7000 Series.

Lens Frame Kit. Replacement part for 3M Full Facepieces 7000 Series. Use to attach 3M Lens 67100-864 to facepiece. Does not include lens.

Clamps Band. Use as a replacement part for 3M Full Facepieces 7000 Series to secure 3M Breathing Room Assembly 7916 to facepiece.

Petroleum Sorbent Mini-Pillow. Pillows are designed with a scrim that encases particulate sorbent material. Pillows are used in areas where more capacity is desired than can easily be achieved using a sorbent pad.

3M Air Regulating Valve W-3062 1/Case

Breathing Tube. Part of the 3M Air Regulating Valve Assembly W-3061(67100-816) which allows the 3M Full Facepiece 7800S or the 3M Full Facepieces 6000DIN to be operated in airline mode. The breathing tube connects to the 3M Airline Adapter W-3187 (67101-306) in the center part of the facepiece.

Exalation Valve Cover. Replacement part for 3M full facepiece 7000 series respirators.

Schrader Plug. This plug, for the air control valves, is a high pressure, 1/4 inch MPT steel fitting.

3M Cartridge/Filter 60928, Organic Vapor/Acid Gas/P100 60/Case.

Lens Assembly. Use as a replacement part on 3M Full Facepieces 6000 Series.

Inhalation Port Gasket. Replacement part for use in side inlet DIN ports of 3M Full Facepieces 7800S.

Breathing Room Assembly. Use as a replacement part for 3M Full Facepieces 7000 Series. Does not include 3M Speaking Diaphragm Kit 67101-122.

Fit Test Nebulizer. Used with the 3M Qualitative Fit Test Apparatus 56221-918, 56222-920 and the 3M Training and Fit Testing Case 67101-142.

Fit Test Hood. Used with 3M Qualitative Fit Test Apparatus 56221-918, 5621-918, and 67100-854 and 3M Training and Fit Testing Case 67101-142 as the test environment for sweet and bitter solution.

Motor Blower. This assembly is a component of the 3M Powerflow System 240-01-00LBC. This lightweight unit (8.0 oz.) delivers a minimum of 4 cfm when used with the required high efficiency filter.

Fit Test Adapter. Use to conduct quantitative fit testing on 3M Facepieces 6000 Series or 3M Facepieces 7000 Series with bayonet style cartridge/filter holders.

Powerflow System. This respirator is a lightweight, face-mounted Powered Air Purifying Respirator (PAPR). It uses a single high efficiency filter for protection against dusts, mists, fumes and radionuclides, making it ideal for lead, asbestos and other hazardous particulates.

Powerflow System. This respirator is a lightweight, face-mounted Powered Air Purifying Respirator (PAPR). It uses a single high efficiency filter for protection against dusts, mists, fumes and radionuclides, making it ideal for lead, asbestos and other hazardous particulates.

Tinted Lens Cover. Use with 3M Full Facepieces 6000 Series. Not for use in welding or other applications that require reduction of UV or IR radiation beyond the capability of normal nonprescription sunglasses.

Removeable DIN Connector. Replacement part designed for use in side inlet ports of 3M Full Facepieces 7800S.

Eyeglass Frame and Mount Kit. Use with 3M Full Facepieces 7000 Series and wearer's corrective lenses. Do not use with 3M Face Mounted PAPR Systems 43100-068 or 43100-068 , 3M Welder's Faceshield 7988 or 3M Welder's Faceshield Kit 7998.

Speaking Diaphragm Kit. Replacement part for 3M Full Facepieces 7000 Series. Includes speaking diaphragm, gasket, retainer and removal tool.

Lens Cover. Use with 3M Full Facepieces 7000 Series to help protect lens.

Tinted Lens Cover. Use with 3M Full Facepieces 7000 Series. Not for use in welding or other applications that require reduction of UV or IR radiation beyond the capability of normal nonprescription sunglasses.

Full Facepiece Buttons. Designed for use with 3M Full Facepiece 7800S Series.

Air Inlet Gasket. Replacement part designed for use in center inlet port of 3M Full Facepieces 7000 Series.

Fit Test Collar. Used with the 3M Qualitative Fit Test Apparatus 56221-918 and 56222-920 to provide a secure hood environment.

3M Training and Fit Testing Case FT-20, Sweet 1/Case

Pressure Relief Valve. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Socket Dust Cap. This socket dust cap helps protect high pressure compressed air hoses. Also used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Air Filter And Regulator Panel. This panel is designed to filter and regulate air being delivered to the supplied air respirator. It has a maximum capacity of 50 cfm at 105 psig. Note: This unit will NOT remove carbon monoxide (CO) from compressed air source.

CO Monitor. This carbon monoxide(CO) monitor is designed to connect directly to the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Filter Cartridge. This cartridge is 99.1% efficient against 0.4-0.6 micron particles.

Head Suspension. Designed to be used with 3M H-Series Hoods, Whitecap Helmets and Hardcap Assemblies.

Ratchet Head Suspension. An optional item that makes adjustment of the 3M Head Suspension W-2878-2 (67101-266) easier and faster. The ratchet band is easy to install and includes a comfortable foam pad.

Wing Nut. This wing nut is a component of the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Nut Base. This nut base is a component of the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Bowl Gasket. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Cartridge Washer. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Air Deflector. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Air Deflector Gasket. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-282).

Coalescing Filter Assay. Used where the concentration of liquid aerosols in compressed air are greater than what can be filtered by the 3M Compressed Air Filter and Regulating Panel W-2806 (67101-258) alone.

HE Filter Element. Replacement filter for the 3M Coalescing Filter Assembly W-3012 (67101-288).

3M Manifold W-3079 1/Case

Air Pressure Regulator. Used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Drain Valve. A component that is used on the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258).

Airline Adapter. This adaptor fits into the center port of the 3M Full Facepiece 7800S or 6000DIN and allows it to be used as a 3M Supplied Air Respirator.

Hat Shell. When used with the 3M Head Suspension W-2878 (67101-266), the 3M Hatshell meets the requirements of ANSI standard Z89.1-2003, Type 1, Class E head protection.

Ratchet Kit. This kit is a part of the 3M Ratchet Suspension W-2879 (67101-268). It attaches to and can be used to adjust the size of the 3M Head Suspension W-2878 (67101-266) used in 3M Helmets and Hoods.

Industrial Interchange Plug. This plug is an industrial interchange standard fitting used for air control valves. It is a 1/4 inch MPT high pressure plug made of steel.

Industrial Interchange Socket. This socket is a standard fitting used with the 3M Compressed Air Filter and Regulator Panel W-2806 (67101-258). It is a 3/8 inch MPT high pressure socket made of brass.

Industrial Interchange Plug. Used on the 3M Supplied Air Hose W-3020. It has a 3/8 inch FPT fitting.

Industrial Interchange Plug. This plug is a standard fitting that is used as a quick connect/disconnect on high pressure hoses. It has a 1/4 inch FPT and is made of steel.

Industrial Interchange Socket. This socket is a high pressure, 1/4 inch FPT brass fitting. This fitting is used on the 3M Supplied Air Hose W-9435 (56621-987/980) and W-2929 (56621-994/90).

Schrader Plug. This plug is a low pressure, 3/8 inch FPT twist lock steel and brass fitting. It may be used on the 3M Supplied Air Hose W-3020.

Schrader Socket. This twist lock socket is a low pressure steel and brass fitting. It is used on the 3M Supplied Air Hose W-3020.

Industrial Interchange Socket. This socket is used on the 3M Supplied Air Hose W-3020, Low Pressure. It is a 3/8 inch FPT brass fitting.

Schrader Plug. Used on the 3M Connector W-3195 (67101-346), Low Pressure, which is used with the 3M Supplied Air Hose W-3020, Low Pressure. It has a 1/4 inch MPT steel fitting.

Industrial Interchange Plug. Used with the 3M Connector W-3195 (67101-346), Low Pressure, which is used on the 3M Supplied Air Hose W-3020. It has a 1/4 inch MPT steel fitting.

Industrial Interchange Plug. This plug is a high pressure hose plug that may be used on the 3M Supplied Air Hose W-9435 (56621-984/80) or W-2929 (56621-990/96). It is a 1/4 inch FPT brass fitting.

Industrial Interchange Socket. This socket is a high pressure hose socket that may be used on the 3M Supplied Air Hose W-9435 (56621-984/80) and W-2929 (56621-990/96). It is a 1/4 inch FPT brass fitting.

High Pressure Socket. A high pressure socket used on the 3M Compressed Air Filter and Regulator Panel 67101-258. It is a 3/8 inch MPT brass fitting.

Air Panel. 3M Air Panels are used to filter and regulate plant supplied air. Offers CO monitoring.

Fit Test Solution 55ml. Fit Test Solution, Sweet, Respiratory Protection, designed to help your organization meet OSHA fit testing requirements for respirators, also can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter

Versaflo Respiratory Helmet Assembly 100/50CFM. Versaflo Respiratory Helmet Assembly, With Standard Visor, Shroud, Color: Gray, Helmet with Faceshield, M-Series, Standard: ANSI Z89.1 Type I, Class G, Valve: Air Regulating Valve, Cooling/Heating Valve, Low Pressure Valve, Capacity: 100 CFM, 50 CFM

Advanced Particulate Filter P100 4.3in. Advanced Particulate Filter, Standards/Approvals: P100, Aerosol Type: Oil and Non-Oil, Connection type: Bayonet, Color: Magenta, With Nuisance Level Organic Vapor Relief, Easier breathing, Longer lasting, Use with Reusable Respirators, Dimension: 4.3in

AdvantageRespirator Cartridges, GMC, P100, Gray. Advantage+ Respirator Cartridges, GMC, P100, Color: Gray, Filtration Grade P100, Height [Nom] 2 in, Length [Nom] 9 in, Resistance: Chlorine; Chlorine Dioxide; Hydrogen Chloride; Hyd, Used With Advantag

Accessories. Accessories for Versafloâ„¢ S-Series Hoods with Integrated Head Suspension, 3M - 7100005445, Versafloâ„¢ premium head suspension, gray

Versaflo TR-6590N Multi-Gas/HE Cartridge, TR-600 Series, Color: Black, Respiratory Assembly Headgear, Back-Mounted Breathing Tube, Cooling / Heating Valve Type, Clear Visor, Compatible with the TR-600 PAPR system, High efficiency particulate filter, cs/5

Replacement Blower TR-301Nfor Versaflo TR-300N. Replacement Blower TR-301N+, Color: Beige, Economy Battery, 6Hours battery life, Back-Mounted Breathing Tube, Head Cover with Suspension, Two selectable flow rate options 6.5CFM and 7.2CFM, Application: VersafloTR-300N Series

Versaflo Radiant Heat Cover for M-307, M-973N. Versaflo Radiant Heat Cover, have a low profile, designed specifically for use with select helmets, Over-visor is designed to flip up,allowing the user the flexibility to have tinted IR/UV protection when needed, Application: M-307, M-973N

Versaflo Radiant Heat Cover for M-407, M-975N. Versaflo Radiant Heat Cover, have a low profile, designed specifically for use with select helmets, Over-visor is designed to flip up, allowing the user the flexibility to have tinted IR/UV protection when needed, Application: for M-407, M-975N

VersafloOver-visor Frame, M-961N. VersafloOver-visor Frame, M-961, have a low profile, designed specifically for use with select helmets, allowing the user the flexibility to have tinted IR/UV protection when needed, protect for head, neck and shoulders against radiant heat, sparks and splashes.

Versaflo Gold Coated Tinted Over-Visor with UV/IR Protection, M-967N, have a low profile, designed specifically for use with select helmets, protection for head, neck and shoulders against radiant heat, sparks and splashes

Versaflo Battery TR-830/94243(AAD) for TR-800 PAPR. Versaflo Battery TR-830/94243(AAD), Intrinsically Safe, for TR-800 PAPR, IS protection - rated at Division 1 for Classes I,II,and III under the most current UL standard, Combine with certain other Versaflo components to build a complete system

Versaflo Battery Attachment Tool TR-838/94244(AAD). Versaflo Battery Attachment Tool TR-838/94244(AAD), for TR-800 PAPR and TR-830 Battery, IS protection - rated at Division 1 for Classes I,II,and III UL standard, Combine with certain other Versaflo components to build a complete system

VersafloFilter Latch Assembly TR-851/94245(AAD). VersafloFilter Latch Assembly TR-851/94245(AAD), for TR-800 PAPR, IS protection - rated at Division 1 for Classes I,II,and III under the most current UL standard, Combine with certain other Versaflo components to build a complete system

CARTRIDGE REPLC ORGANIC VAPOR/ACID GAS - 7000051849

Tape, PTFE Film, 3M - 7000132176, PTFE film tape, 4 mil.

Papr Starter Kit Pa700 With Nylon Belt. Primair PAPR System, PA700, with nylon belt and bonus starter kit, includes blower, battery, charger, comfort pad, nylon belt, and bonus starter kit (PA100 filter and optional filter cover), Offering convenience, comfort, and confidence

Hepa Filter P100 For Pa800 Papr Helmet. HEPA Filter Cartridge, Dimension: 11.0x11.0x8.5cm, Weight: 11.0 lb, for use with the PA800 PAPR Welding helmet, 5/Box

Breathing Tube, Y-shape, for tight fitting facepieces, Size: 34 inch.

Breathing Tube, Y-shape, large, for tight fitting facepieces, Size: 40 inch.

Comfort Pad, Material: Nylon, provide extra comfort/support to PA700 belt (PA751).

Cartridge Cover, Size: small.

Battery Pack Pa700 Papr Std Capacity. Battery Pack, Standard Capacity, Rechargeable, lithium-ion battery, for the PA700 belt mount PAPR, dimension: 6.5x3.0x2.5 cm, Weight: 1.3 lbs

Kit 1-Bay Charger N. America For Pa700. charger kit, 1bay, North America, weight: 0.8lb, with Power Cord Charger unit with power brick and cord, For PA700 rechargeable battery, can re-charge a fully depleted battery in approximately 4.5 hours, it continuously monitors the health of the battery Pack

Category