• 0
Shop Products $

Tru-Stir Stirrer Shaft Coupling. Fits 10mm stirrer shaft O.D., Upper coupling 9.5mm Male, For use with 3-Jaw Jacobs.

Tru-Stir Stirrer Shaft Coupling. Fits 12.7mm stirrer shaft O.D., Upper coupling 9.5mm Male, For use with 3-Jaw Jacobs.

Tru-Stir Stirrer Shaft Coupling. Fits 19mm stirrer shaft O.D., Upper coupling 9.5mm Male, For use with 3-Jaw Jacobs.

Tru-Stir Stirrer Shaft Coupling. Fits 10mm stirrer shaft O.D., Upper coupling 7.9mm Male, For use with Flexible Shaft.

Tru-Stir Stirrer Shaft Coupling. Fits 12.7mm stirrer shaft O.D., Upper coupling 7.9mm Male, For use with Flexible Shaft.

Tru-Stir Stirrer Shaft Coupling. Fits 19mm stirrer shaft O.D., Upper coupling 7.9mm Male, For use with Flexible Shaft.

Tru-Stir Stirrer Shaft Coupling. with allen wrench set. Eliminates the need to use rubber hose or universal adapters. Fits 10mm stirrer shaft OD, Motor shaft 5/16in diameter, For use with Stirrer-Glas-Col-G.K. Heller, Model GT-21. Rated for 24 in/lb of torque. Total length, 4in.

Tru-Stir Stirrer Shaft Coupling. Fits 12.7mm stirrer shaft O.D., Motor shaft 7.9mm Male, For use with CG-20-35.

Tru-Stir Stirrer Shaft Coupling. Fits 10mm stirrer shaft O.D., Motor shaft 9.5mm, For use with CG-2021 thru CG-2025.

Tru-Stir Stirrer Shaft Coupling. Fits 12.7mm stirrer shafts O.D., Motor shaft 9.5mm diameter, For use with CG-2021 thru CG-2025.

Tru-Stir Stirrer Shaft Coupling. Fits 19mm stirrer shaft O.D., Motor shaft 9.5mm diameter, For use with CG-2021 thru CG-2025.

Tru-Stir Stirrer Shaft Coupling. Fits 10mm stirrer shaft O.D., Motor shaft 12.7mm diameter, For use with CG-2025-20.

Tru-Stir Stirrer Shaft Coupling. Fits 19mm stirrer shaft O.D., Motor shaft 12.7mm diameter, For use with CG-2025-20.

Tru-Stir Stirrer Shaft Coupling. Fits 25.4mm stirrer shaft O.D., Motor shaft 12.7mm diameter, For use with CG-2025-20.

Tru-Stir Stirrer Shaft Coupling. Fits 19mm stirrer shaft O.D., Motor shaft 15.9mm diameter, For use with CG-2033-10.

Tru-Stir Stirrer Shaft Coupling. Fits 25.4mm stirrer shaft O.D., Motor shaft 15.9mm diameter, For use with CG-2033-10.

Tru-Stir Stirrer Shaft Coupling. Fits 19mm stirrer shaft O.D., Motor shaft 19mm diameter, For use with CG-2033-11.

Tru-Stir Stirrer Shaft Coupling. Fits 25.4mm stirrer shaft O.D., Motor shaft 19mm diameter, For use with CG-2033-11.

Tru-Stir Stirrer Shaft Coupling. Fits 10mm stirrer shaft O.D., Motor shaft 12mm diameter, For use with CG-2034-A.

Tru-Stir Stirrer Shaft Coupling. Fits 19mm stirrer shaft O.D., Motor shaft 12mm diameter, For use with CG-2034-A.

Tru-Stir Stirrer Shaft Coupling Replacement Part. 3/8 Double Male Adapter.

Tru-Stir Stirrer Shaft Coupling Replacement Part. 3/8 to 5/16 Male Adapter.

Tru-Stir Stirrer Shaft Coupling Replacement Part. 5/16 Upper Motor Adapter (Purple).

Tru-Stir Stirrer Shaft Coupling Replacement Part. 3/8 Upper Motor Adapter (Red).

Tru-Stir Stirrer Shaft Coupling Replacement Part. 1/2 Upper Motor Adapter (Aqua Marine).

Tru-Stir Stirrer Shaft Coupling Replacement Part. 5/8 Upper Motor Adapter (Gold).

Tru-Stir Stirrer Shaft Coupling Replacement Part. 3/4 Upper Motor Adapter (Black).

Tru-Stir Stirrer Shaft Coupling Replacement Part. 12mm Upper Motor Adapter (Green).

Tru-Stir Stirrer Shaft Coupling Replacement Part. 10mm Shaft Adapter with Collar.

Tru-Stir Stirrer Shaft Coupling Replacement Part. 19mm Shaft Adapter with Collar.

Tru-Stir Stirrer Shaft Coupling Replacement Part. 25.4mm Shaft Adapter with Collar.

Anchor Paddle. 10.2x10.2cm. U-shaped anchor paddle with a hub welded to a 0.9dia.x91.4Lcm 316L stainless steel shaft. Glass bead finish. This close clearance paddle is used to gently blend viscous fluids at low shear.

Anchor Paddle. 12.7x12.7cm. U-shaped anchor paddle with a hub welded to a 0.8dia.x40.6Lcm 316L stainless steel shaft. Glass bead finish. This close clearance paddle is used to gently blend viscous fluids at low shear.

Anchor Paddle. 12.7x25.4cm. U-shaped anchor paddle with a hub welded to a 0.8dia.x40.6Lcm 316L stainless steel shaft. Glass bead finish. This close clearance paddle is used to gently blend viscous fluids at low shear.

R1312 Turbine Stirrer. For use with EUROSTAR POWER Basic and POWER Control-Visc stirrer motors. Stainless steel. 5.1cm diameterx35.2Lcm. Maximum speed range: 2000rpm.

FK1 Flexible Coupling. For use with overhead stirrers. Required for stirring jobs in glass apparatus.

R301 Stirring Shaft Protector. For use with EUROSTAR POWER Basic and POWER Control-Visc stirrer motors. Adjusts from 19-31cm.

Four-Bladed Propeller Stirrer. R1345 Stainless steel. 10.2diameterx54.9Lcm. Maximum speed range: 800rpm.

R1382 Three-Bladed Propeller Stirrer. Stainless steel. 5.6diameterx35.2Lcm. Maximum speed range: 2000rpm.

Three-Bladed Propeller Stirrer. R1389 Stainless steel. 7.6diameterx35.2Lcm. Maximum speed range: 2000rpm. PTFE coated.

R1313 Turbine Stirrer. Stainless steel. 7.1diameterx40Lcm. Maximum speed range: 800rpm.

DissolverStirrer. R1300 Stainless steel 7.9 diameterx35.2L cm. Maximum speed range: 2000rpm.

R1302 Dissolver Stirrer. Stainless steel. 10.2diameterx35.2Lcm. Maximum speed range: 1000rpm.

R 1303 Dissolver Stirrer. Stainless steel. 4.5diameterx80Lcm. Maximum speed range: 2000rpm.

Centrifugal Stirrer. R1352 Stainless steel. 6.1/1.5diameterx35.2Lcm. Maximum speed range: 2000rpm. 6.1 is the stirrer diameter when its rods are open. 1.5 is the stirrer diameter when its rods are closed.

S25N-18G Dispersing Tool. For use with the IKA ULTRA-TURRAX T25 Homogenizer. Volume range 10 to 1000mL. Coarse, 18mm diameter.

Accessories for Eurostar 20 Digital Electronic Overhead Stirrer, IKA - 0000477700, R1385 Propeller Stirrer, 3-Bladed

Three-Bladed Propeller Stirrer. Made of stainless steel. Flow-efficient design. For drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.

Paddle Stirrer. Tangential flow, minimum turbulence, good heat exchange, gentle treatment of product. Used at low to medium speeds.

Special Shaft P/O Dispersor.

Support For Temperat Probe.

Fixing Device Mod.

Switch Module Safety.

Temperature Sensor, IKA®Works - 0003516800, PT 1000.60 Temperature Sensor, 3mm dia., with 100 cm Cable

Ikaflon 30 Round.

Blade Impeller BR14. High-shear, radial flow for mixing in carboys or narrow-neck flasks. Collapsed blades enter any opening over 10mm diameter. Will vortex 18.9L of water at 1000rpm. For use with all RZR model overhead stirrers.

Blade Impeller BR13. For large volumes, high viscosities, or vigorous axial flow with maximum vortexing. Will vortex 18.9L of water at 1200rpm. For use with all RZR model overhead stirrers.

Blade Impeller BR11. High-shear. For moderate vortexing. Will vortex 18.9L of water at 1200rpm. For use with all RZR model overhead stirrers.

Propeller PR31. Low-shear. Axial flow. Moderate pumping capacity for low-viscosity fluids. Will vortex 18.9L of water at 5800rpm. For use with all RZR model overhead stirrers.

Propeller PR32. Low-shear. Axial flow. High pumping capacity for medium-viscosity fluids. Will vortex 18.9L of water at 2500rpm. For use with all RZR model overhead stirrers.

Propeller PR33. Low-shear. Axial flow. Very high pumping capacity. Will vortex 18.9L of water at 1300rpm. For use with all RZR model overhead stirrers.

Radial Flow Impeller TR20. Maximum-shear. For minimum vortexing. Radial flow. Will vortex 18.9L of water at 4000rpm. For use with all RZR model overhead stirrers.

Radial Flow Impeller TR21. Maximum-shear. For moderate vortexing. Radial flow. Will vortex 18.9L of water at 2000rpm. For use with all RZR model overhead stirrers.

Propeller PR30. Low-shear. High top to bottom pumping capacity with high gas injection. Will vortex 18.9L of water at 3600rpm. For use with all RZR model overhead stirrers.

Shaft Guard. For use with all RZR model overhead stirrers.

Flexible shaft for overhead stirrer. For Use With Overhead Stirrer, Material PTFE/Stainless Steel, Includes Chuck, Manufacturers Warranty Length 3 year

Blade Impeller BR12. Moderate-shear. For very high vortexing. Will vortex 18.9L of water at 800rpm. For use with all RZR model overhead stirrers.

MAGNETIC NEEDLE - 3050

Sensor Temperaure 230Mm. Temperature sensor for digital hotplate models, MODEL PT1000-A - length of 230mm, used for MS-H280-Pro, MS-H-Pro +,MS-H-ProT, MS7-H550-Pro, MS7-H550-S

Support clamp of PT1000, use with MS-H280-Pro and MS-H380-Pro.

SUPPORT ROD AND CLAMP FOR HP AND ST - 18900017

TEMPERATURE PROBE FOR HP AND ST - 18900016

SUPPORT ROD CLAMP W/ TEMP PROBE FOR HP/S - 18900293

RIBBON CLAMP FOR OVERHEAD STIRRER - 30586774

TURBINE FOR OVERHEAD STIRRER - 30586781

FIXED BLADE FOR OVERHEAD STIRRER - 30586776

FOALDING BLADE FOR OVERHEAD STIRRER - 30586778

TELESCOPIC STAND FOR OVERHEAD STIRRER - 30586772

DOUBLE CLAMP FOR OVERHEAD STIRRER - 30586773

6 HOLE PADDLE FOR OVERHEAD STIRRER - 30586779

FLOATING BLADE FOR OVERHEAD STIRRER - 30586777

ANCHOR BLADE FOR OVERHEAD STIRRER - 30586775

SUPPORT STAND FOR OVERHEAD STIRRER - 30586771

PROPELLER FOR OVERHEAD STIRRER - 30586780

CHUCK COVER FOR OVERHEAD STIRRER - 30586842

TURBO PROPELLER FOR OVERHEAD STIRRER - 30586782

Stirrer Turbine, fluoropolymer resin, 150mm. Replacement part for 30L and 50L Pilot Plant Reactor, Cylindrical, Jacketed (47733-940 and 47733-978).

Stirrer Bearing, fluoropolymer resin, fits 25.4mm Shaft, 45/50 Inner Joint, Complete . Replacement part for 30L and 50L Pilot Plant Reactor, Cylindrical, Jacketed (47733-940 and 47733-978).

Fluoropolymer resin Inner Bearing. Replacement part for 30L and 50L Pilot Plant Reactor, Cylindrical, Jacketed (47733-940 and 47733-978).

PTFE Flake Catching Cup. For 19mm stirrer shaft. Porous fluoropolymer resin frit included.

Agitator, TFE Stir Shaft. Diameter: 10.2cm. Fits Shaft Size: 19mm. Impeller Angle: 45[degree].

Agitator, TFE Stir Shaft. Diameter: 12.7cm. Fits Shaft Size: 19mm. Impeller Angle: 45[degree].

Agitator, TFE Stir Shaft. Diameter: 15.2cm. Fits Shaft Size: 19mm. Impeller Angle: 45[degree].

Agitator, TFE Stir Shaft. Diameter: 10.2cm. Fits Shaft Size: 19mm. Impeller Angle: 60[degree].

Agitator, TFE Stir Shaft. Diameter: 12.7cm. Fits Shaft Size: 19mm. Impeller Angle: 60[degree].

Agitator, TFE Stir Shaft. Diameter: 15.2cm. Fits Shaft Size: 19mm. Impeller Angle: 60[degree].

Agitator, TFE. High Viscosity, 19mm and 25.4mm stir shaft. Fits reactor capacity: 20L. Stir Shaft O.D.: 19mm. Agitator O.D.: 20.3cm.

STARFISH BASE PLATE. StarFish Base Plate for standard IKA and RDT Hotplate Stirrers, 135mm. Accomodates any StarFish Polyblock or Monoblock for heating and stirring in beakers, dram vials, test tubes, round bottom flasks, scintillation vials, and any laboratory glassware sample vessels.

STARFISH BASE PLATE. StarFish Base Plate for standard Heidolph Hotplate Stirrers, 145mm. Accomodates any StarFish Polyblock or Monoblock for heating and stirring in beakers, dram vials, test tubes, round bottom flasks, scintillation vials, and any laboratory glassware sample vessels.

STARFISH BASE PLATE. StarFish Base Plate for standard Cimarec Hotplate Stirrers, 184 x 184mm. Accomodates any StarFish Polyblock or Monoblock for heating and stirring in beakers, dram vials, test tubes, round bottom flasks, scintillation vials, and any laboratory glassware sample vessels.

Category