• 0
Shop Products $

MIXER CLMP MNT.50HP GEARDRV - W5P50-1

MIXER CLMP MNT.75HP DIRECTDRVE - W1P75-1

MIXER CLMP MNT.50HP DIRECTDRVE - W1P50-1

MIXER CLMP MOUNT GEARDRV.75HP - W5P75-1

VWRPitchd Blade Propeller 3Inch. Includes 4 Set Screws And Allen Key. 316L Electropolished Stainless Steel. Low Shear, High Top-To-Bottom Pumping Action With High Gas (Air) Injection. Axial Flow.

VWRShaft Only 24Inch. 3/8Inch Diameter With One End Turned Down To 1/2Inch X 5/16Inch Diameter To Accommodate Both 3/8 And 5/16Inch Impeller Bores. 316L Electropolished Stainless Steel. Can Be Used With Any Propeller With A Bore Size Of 5/16Inch Or 3/8Inch .

VWRShaft Only 30Inch. 3/8Inch Diameter With One End Turned Down To 1/2Inch X 5/16Inch Diameter To Accommodate Both 3/8 And 5/16Inch Impeller Bores. 316L Electropolished Stainless Steel. Can Be Used With Any Propeller With A Bore Size Of 5/16Inch Or 3/8Inch .

Support Stand Clamp. Stainless steel. Designed with a precision fit to accept a 1.3cm diameter support shaft and a 1.6cm diameter support rod.

GEAR MOTOR READOUTS - 099DHST20

PROP 3IN DIA FOLDING3/8INBORE - 801146

Axial Flow Impeller. Diameter: 86.4mm. Bore: 9.5mm. For use with lab mixers or flocculators. Recommended for low-viscosity flow-controlled applications. Maximizes flow with ability to add shear options.

Axial Flow Impeller. Diameter: 65mm. Bore: 9.5mm. For use with lab mixers or flocculators. Recommended for low-viscosity flow-controlled applications. Maximizes flow with ability to add shear options.

IMPELER SAW TOOTHDISCR-500 3IN - 869580

TRANSFORMER 220V DOWN TO 110V - 210213

Axial Flow Impeller. Diameter: 96.5mm. For use with lab mixers or flocculators. Recommended for low-viscosity flow-controlled applications. Maximizes flow with ability to add shear options.

A310 Impeller, Lightnin® - 809412, High-Efficiency Axial Flow Impeller

SHAFT 42IN 316SS 3/8 IN DIA - 143049

SHAFT 36IN 316SS 3/8 IN DIA - 143048

Shaft. Blade shaft for use with lab mixers. Made of type 316 stainless steel. Diameter: 9.5mm. Length: 76.2cm.

SHAFT 24 316SS 3/8 DIA - 143727

Folding Propeller/Impeller. Diameter: 51mm. Bore: 7.9mm. Recommended for mixing in vessels with narrow ports. For use with lab mixers.

PROP 100 W/RING GUARD - 800580

PROP 3.1DIA A100 3/8 BORE - 801003

Ring Guard for Axial Flow Impeller. Diameter: 63.5mm. For use with lab mixers or flocculators. Prevents damage from dip tubes, temperature probes and other in-tank devices.

Axial Flow Impeller. Diameter: 86.6mm. Bore: 7.9mm. For use with lab mixers or flocculators. Recommended for low-viscosity flow-controlled applications. Maximizes flow with ability to add shear options.

Four-Blade Impeller. Diameter: 5.1mm. Recommended for low- to medium-viscosity, flow-controlled applications. Classic 45[degree] pitched blade design. Produces a desirable balance of flow and shear.

Radial Flow Impeller. Diameter: 38.1mm. Bore: 7.9mm. For lab mixers or flocculators. Recommended for high-shear mixing and gas-liquid applications. Radial design provides shear to achieve good contacting for liquid-liquid dispersions and emulsions. Recommended for gas dispersions.

Radial Flow Impeller. Diameter: 52mm. For use with lab mixers or flocculators. Recommended for high-shear mixing and gas-liquid applications. Radial design provides shear to achieve good contacting for liquid-liquid dispersions and emulsions. Also recommended for gas dispersions.

Radial Flow Impeller. Diameter: 51mm. Recommended for high-shear applications with elements that are difficult to disperse. Excellent for high-shear, solid-liquid and liquid-liquid applications. Typically used with difficult-to-dispense pigments.

Ring Stand. High-density ring stand for use with lab mixers. 15.9mmx61cm.

Stirrer Accessories, Shaft without Impeller. 316 Stainless Steel. Dimensions: 30.5cm in length and 9.5mm in diameter.

Stirrer Accessories, Shaft without Impeller. 316 Stainless Steel. Dimensions: 45.7cm in length and 9.5mm in diameter.

Stirrer Accessories, Impeller Blades. Stainless Steel. Traditional three-blade design for moderate pumping action and wetting dry powders. For low to high viscosity materials. Dimensions: 7.9mm bore diameter and 2.5cm blade diameter.

Stirrer Accessories, Impeller Blades. Stainless Steel. Traditional three-blade design for moderate pumping action and wetting dry powders. For low to high viscosity materials. Dimensions: 7.9mm bore diameter and 3.8cm blade diameter.

Stirrer Accessories, Impeller Blades. Stainless Steel. Traditional three-blade design for moderate pumping action and wetting dry powders. For low to high viscosity materials. Dimensions: 7.9mm bore diameter and 6.9cm blade diameter.

Axial Flow Impeller. Diameter: 78.7mm. Bore: 7.9mm. Recommended for applications requiring moderate pumping action and powder-wetting capabilities. Superpitch design. 1.5 pitch ratio for greater mixing capabilities.

Stirrer Accessories, Impeller Blades. Stainless Steel. Traditional three-blade design for moderate pumping action and wetting dry powders. For low to high viscosity materials. Dimensions: 7.9mm bore diameter and 5.1cm blade diameter.

Stirrer Accessories, Shaft without Impeller. 316 Stainless Steel. Dimensions: 30.5cm in length and 7.9mm in diameter.

Stirrer Accessories, Shaft without Impeller. 316 Stainless Steel. Dimensions: 45.7cm in length and 7.9mm in diameter.

Stirrer Accessories, Shaft without Impeller. 316 Stainless Steel. Dimensions: 61cm in length and 7.9mm in diameter.

Universal Support Stand. 1.9cm diameterx86cm, two-sections, nickel-plated, mounted in a heavy iron base. Five 1.3cm diameter holes in base provide choice of work positions. Holds up to 38cm diameter vessel between base arms. Use with Con-Torque Tissue Homogenizer.

Support Stand. Stainless steel. Heavy crescent base, support rod (71Lx1.6cm diameter), and a lock nut to fasten the rod to the base. Accommodates reservoirs up to 46cm in diameter. Extra threaded holes accept additional support rods or stabilizer bolts for securing the base to a lab table.

Support Rod. For use with a support stand. 71cm in length with a 1.6cm diameter.

Stabilizer Bolts. For use with support stands.

Stirrer Accessories, Agitator. Stainless steel blades are riveted onto 6.3mm shafts. Pitch may be varied to control degree of agitation. Shaft size: 0.640cm diameterx30.5Lcm. Propeller: 5.080cm diameter.

Stirrer Accessories, Agitator. Stainless steel blades are riveted onto 6.3mm shafts. Pitch may be varied to control degree of agitation. Recommended for hollow spindle stirrers. Propeller size: 5.08cm diameter. Shaft: 0.64cm diameterx61Lcm.

Stirrer Accessories, Agitator. Stainless steel blades are riveted onto 6.3mm shafts. Recommended for hollow spindle stirrers. Pitch may be varied to control degree of agitation. Shaft dimensions: 0.64cm diameterx61Lcm. Propeller: 5.08cm diameter.

Accessories for Overhead Stirrers, Caframo - 13CKEY, Key Only

1-Liter Stainless Steel Container for Waring Blenders. 1L container assembly with stainless steel screw cover for sealing in contents and 15.9mm threaded sampling plug for removal or addition of material. Fits all Waring power units. Complete with O-ring gaskets for screw cover and sampling plug.

Stainless Steel Shaft Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Shaft dimensions: 1cm diameterx30.5Lcm.

Stainless Steel Shaft Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Shaft dimensions: 1cm diameterx38Lcm.

Stainless Steel Shaft Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Shaft dimensions: 1cm diameterx45.7Lcm.

Stainless Steel Shaft Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Shaft dimensions: 1cm diameterx50.8Lcm.

Stainless Steel Shaft Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Shaft dimensions: 1cm diameterx61Lcm.

Stainless Steel Shaft Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Shaft dimensions: 1cm diameterx76.2Lcm.

Power Hold Clamping System. Large knobs for powerful gripping, adjustable stop for speedy set up and operation. Made with precision-machined aluminum rod. Can hold any stirrer that has a diameter from 9.5-16mm.

Power Hold Clamping System. Large knobs for powerful gripping, adjustable stop for speedy set up and operation. Made with precision-machined aluminum rod. Can hold any stirrer that has a diameter from 12-19mm.

Universal Swivel Clamp. Allows stirrer to be set at any compound angle. Control knobs permit user to control swivel setting, raise or lower stirrer, and lock stirrer on support rod. Made with precision-machined aluminum rod. Can fit stirring stands from 12-19mm in diameter.

Arrow Support Stand. Heavy-duty steel base and stainless steel support rod. Rubber-padded legs increase stability and cut vibration. Overall height is 73.7cm. Available with 16mm diameter support rod.

Arrow Support Stand. Heavy-duty steel base and stainless steel support rod. Rubber-padded legs increase stability and cut vibration. Overall height is 73.7cm. Available with 19mm diameter support rod.

Spider Support Stand. Will fit securely on pails, small drums, square or rectangular tanks with rims up to 16mm in width. Lightweight aluminum base and stainless steel support rod (61cmHx1.6cm diameter). Adjustable legs and swivel clamp for maximum holding power. 5-gallon vessel capacity.

Spider Support Stand. Will fit securely on pails, small drums, square or rectangular tanks with rims up to 16mm in width. Lightweight aluminum base and stainless steel support rod (61cmHx1.6cm diameter). Adjustable legs and swivel clamp for maximum holding power. 55-gallon vessel capacity.

Jacobs Adjustable Chuck. With key, accepts stirrer shaft diameters from 1.6 to 9.5mm. Motor shaft diameter is 6.3mm.

Jacobs Adjustable Chuck. With key, accepts stirrer shaft diameters from 1.6 to 9.5mm. Motor shaft diameter is 7.9mm.

Jacobs Adjustable Chuck. With key, accepts stirrer shaft diameters from 1.6 to 9.5mm. Motor shaft diameter is 9.5mm.

Nylon Keyless Chuck. Nylon bodied, accepts stirrer shaft diameters from 1.6 to 9.5mm. Motor shaft diameter is 6.3mm.

Nylon Keyless Chuck. Nylon bodied, accepts stirrer shaft diameters from 1.6 to 9.5mm. Motor shaft diameter is 7.9mm.

Nylon Keyless Chuck. Nylon bodied, accepts stirrer shaft diameters from 1.6 to 9.5mm. Motor shaft diameter is 9.5mm.

Flexible Coupling. Safe alternative for working with glass stirring shafts. 10.2Lcm. One end contains a corrosion-resistant metal collar and a stainless steel set screw. A fluoropolymer resin sleeve securely holds a glass shaft of 10mm in diameter. Rubber sleeve body. Motor shaft diameter: 6.3mm.

Flexible Coupling. Safe alternative for working with glass stirring shafts. 10.2Lcm. One end contains a corrosion-resistant metal collar and a stainless steel set screw. A fluoropolymer resin sleeve securely holds a glass shaft of 10mm in diameter. Rubber sleeve body. Motor shaft diameter: 7.9mm.

Flexible Coupling. Safe alternative for working with glass stirring shafts. 10.2Lcm. One end contains a corrosion-resistant metal collar and a stainless steel set screw. A fluoropolymer resin sleeve securely holds a glass shaft of 10mm in diameter. Rubber sleeve body. Motor shaft diameter: 9.5mm.

Replacement fluoropolymer resin Sleeve. For use with Arrow Flexible Couplings. Holds a glass shaft of 10mm.

Stainless Steel Propeller Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Paddles may be factory set at any angle with no extra charge. Propeller diameter: 6.7cm.

Stainless Steel Propeller Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Paddles may be factory set at any angle with no extra charge. Propeller diameter: 7.9cm.

Stainless Steel Propeller Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Paddles may be factory set at any angle with no extra charge. Propeller diameter: 9.2cm.

Stainless Steel Propeller Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Paddles may be factory set at any angle with no extra charge. Propeller diameter: 10.8cm.

Stainless Steel Propeller Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Paddles may be factory set at any angle with no extra charge. Propeller diameter: 12cm.

Stainless Steel Propeller Assembly. Can withstand corrosive attack by sodium and calcium brines, hypochlorite solutions, phosphoric and sulfurous acid. Paddles may be factory set at any angle with no extra charge. Propeller diameter: 13.3cm.

KIMAX Glass Stirring Rods. Rounded annealed ends. Designed from Federal Specification NNN-R-560, Type I requirements. Measurements: 250Lx6mm diameter.

Support Ring, Extension, Iron. 152mm ring is forged of hot-rolled, plated steel wire with an integral plain shank. Stem is 178mm.

Overhead Stirrer, Accessories, Extension Rod, 1/4x6in. (6.35x153mm) . For use with extension sleeve for lengthening paddles. Stainless steel.

Overhead Stirrer, Accessories, Extension Rod, 1/4x1/2in. (6.35x305mm) . For use with extension sleeve for lengthening paddles. Stainless steel.

Overhead Stirrer, Accessories, Extension Sleeve . for 1/4in. (6.35mm) diameter rods, with set screws. For use in lengthening paddles. Stainless steel.

H-FRAME STAND. H-Frame Stand S2 XXL for overhead stirrers.

RH3 Strap Clamp. Prevents vessels from slipping or rotating during stirring or dispersing. For use with Model RW16 Basic Stirrer Motor and ULTRA-TURRAX T25 Basic Laboratory Disperser/Homogenizer. Use with plate stand 33994-428.

Nalgene Magnetic Carboy Stirrer, Thermo Scientific. Provides low-speed mixing of high volumes of media and buffer solution, for use with a magnetic stir plate( not included), includes closure and two impellers.

Lower Assembly/Axial-Flow Shaft and Impeller. 316 stainless steel. For use with BioTech Mixer Overhead Drive, vessel 66463-200. Shaft length: 762mm. Impeller diameter: 173mm.

Lower Assembly/Axial-Flow Shaft and Impeller. 316 stainless steel. For use with BioTech Mixer Overhead Drive, vessel 66463-202. Shaft length: 813mm. Impeller diameter: 224mm.

Lower Assembly/Axial-Flow Shaft and Impeller. 316 stainless steel. For use with BioTech Mixer Overhead Drive, vessel 66463-204. Shaft length: 965mm. Impeller diameter: 254mm.

Glass Stirring Shafts, 19 mm, Ace Glass - 8076-41, Stirring Shaft, Drilled Style

Multi-Paddle Agitators, PTFE, 19 mm, Ace Glass Incorporated - 8100-09, 140 mm, Multi-Paddle PTFE Agitator

Multi-Paddle Agitators, PTFE, 19 mm, Ace Glass Incorporated - 8100-19, 200 mm, Multi-Paddle PTFE Agitator

Multi-Paddle Agitator, PTFE, Ace Glass Incorporated - 8101-28, 180 mm, Multi-Paddle PTFE Agitator

Multi-Paddle Agitator, PTFE, Ace Glass Incorporated - 8101-38, 203 mm, Multi-Paddle PTFE Agitator

STIRRING PADDLE REPLCMT - H-4266

ELEMENT HTG SIDE 2 REQUIRED - EL9X4

ELEMENT HTG TOP/BTM 1 REQUIRED - EL9X3

Rotary Scraper 500ml. Rotary Scraper, Individual Tool, Fits 500mL Round Bottom Flasks, For Chem spin scraper, Rotary tools, Spatula, Stainless steel and PTFE for rapid sample removal, Fits Outer Joint Size 24/40 or Larger, Used with the correct corresponding flask size/capacity

Stand Rod 25 mm. Stand Rod, Rod Length: 710 mm, Rod Material 304 stainless steel tube, compatible with A110 stand base, Customize to A113 or A114 stand to fit apparatus, Stand rod composed of 304 stainless steel, Easy to adapt to apparatus, Chemically inert and corrosion resistant, Diameter: 25 mm

Category