• 0
Shop Products $

TOP PLATE AND HEATER ASSEMBLY 400 230V - 18901720

TOP PLATE AND HEATER ASSEMBLY 400 100V - 18901721

STIRRER TOP PLATE REPLACEMENT 400 410 - 18901722

BOARD SET 400D 120V - 18901723

BOARD SET 400D 230V - 18901724

BOARD SET 400D 100V - 18901725

BOARD SET 410D 120V - 18901726

BOARD SET 410D 230V - 18901727

BOARD SET 410D 100V - 18901728

BOARD SET 420D 120V - 18901729

BOARD SET 420D 230V - 18901730

BOARD SET 420D 100V - 18901731

POWER CORD US 120V - 18901732

POWER CORD EU 230V - 18901733

POWER CORD UK 230V - 18901734

POWER CORD JP 100V - 18901735

REPLACEMENT FEET 200 400 600 - 18901736

TOP PLATE AND HEATER ASSEMBLY 600 120V - 18901740

TOP PLATE AND HEATER ASSEMBLY 600 230V - 18901741

TOP PLATE AND HEATER ASSEMBLY 600 100V - 18901742

STIRRER TOP PLATE REPLACEMENT 610 - 18901743

BOARD SET 600D 120V - 18901744

BOARD SET 600D 230V - 18901745

BOARD SET 600D 100V - 18901746

BOARD SET 610D 120V - 18901747

BOARD SET 610D 230V - 18901748

BOARD SET 610D 100V - 18901749

BOARD SET 620D 120V - 18901750

BOARD SET 620D 230V - 18901751

BOARD SET 620D 100V - 18901752

POWER CORD US 120V - 18901753

POWER CORD EU 230V - 18901754

POWER CORD UK 230V - 18901755

POWER CORD JP 100V - 18901756

SET OF CONTROL KNOBS 200 - 18901758

SET OF CONTROL KNOBS 200 - 18901759

CERAMIC SPACER SET 200 - 18901760

TOP PLATE AND HEATER ASSEMBLY 200 120V - 18901761

TOP PLATE AND HEATER ASSEMBLY 200 230V - 18901762

TOP PLATE AND HEATER ASSEMBLY 200 100V - 18901763

STIRRER TOP PLATE REPLACEMENT 210 - 18901764

CONTROL BOARD REPLACE SET 200 120V - 18901766

CONTROL BOARD REPLACE SET 200 230V - 18901767

CONTROL BOARD REPLACE SET 200 100V - 18901768

POWER CORD 200 US 120V - 18901769

POWER CORD 200 EU 230V - 18901770

POWER CORD 200 UK 230V - 18901771

POWER CORD 200 JP 100V - 18901772

CONTROL KNOB SCHOLAR HOTPLATE 170 - 18901774

CERAMIC SPACER SET HOTPLATE 170 - 18901775

TOP PLATE AND HEATER ASSEMBLY 170 120V - 18901776

TOP PLATE AND HEATER ASSEMBLY 170 230V - 18901777

TOP PLATE AND HEATER ASSEMBLY 170 100V - 18901778

CONTROL BOARD REPLACEMENT HOTPLATE 170 - 18901779

SCHOLAR HOTPLATE FOOT 170 - 18901780

CONTROL KNOB 611 - 18901781

CERAMIC SPACER SET 611 - 18901782

REPLACEMENT TOP PLATE 611 - 18901783

CONTROL BOARD REPLACEMENT 611 - 18901784

POWER CORD 611 US 120V - 18901786

FUSEUSE 611 250VAC 1A - 18901787

FOOT 611 - 18901788

CONTROL KNOB SCHOLAR STIRRER 171 - 18901789

MOTOR 4INCH 200 - 18901790

CONTROL BOARD ASSEMBLY 171 - 18901791

PILOT PLANT REACTOR, 10 LITER JACKETED. Stirrer, Upper Turbine, fluoropolymer resin.

FOR AIR STIRRERS. Filter-Regulator-Lubricator, Complete. Combination unit features a filter, regulator and lubricator with 1/4in. NPT fittings. Regulator has a 1 1/2in. diameter gauge that reads from 0 to 160 PSI. Filter element removes particles down to 40 microns in size.

STIRRER COUPLING, FLEX-DRIVE. Flex-Drive coupling for 10mm O.D. glass stirrer shafts. The design of our Flex-Drive stirrer coupling eliminates the need to use rubber hose or universal adapters to attach your glass stirrer shafts to overhead motors. Coupling incorporates a 3in.

STIRRER COUPLING, FLEX-DRIVE. Replacement silicone bushing. The design of our Flex-Drive stirrer coupling eliminates the need to use rubber hose or universal adapters to attach your glass stirrer shafts to overhead motors. Coupling incorporates a 3in.

STIRRER SHAFT COUPLING, UNIVERSAL STYLE. Fits Glass Shaft Size: 6.00mm; Stud O.D: 1/4in. Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw.

STIRRER SHAFT COUPLING, UNIVERSAL STYLE. Fits Glass Shaft Size: 10.0mm; Stud O.D: 1/4in. Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw.

PILOT PLANT REACTOR, 10 LITER JACKETED. Stirrer Shaft Coupling, 19mm.

STIRRER SHAFT COUPLING, UNIVERSAL STYLE. Fits Glass Shaft Size: 19.0mm; Stud O.D: 3/8in. Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw.

FLEXIBLE DRIVE SHAFT. Flexible shaft, 5/16in. end fittings. Flexible drive shaft permits the drive motor to be remotely mounted thereby providing for easier access to glassware components. Shaft is 48in. in length and can be operated at speeds to 2000 RPM. Heavy duty,.250in.

FLEXIBLE DRIVE SHAFT. 5/16in. male to 1/4in. female adapter. Flexible drive shaft permits the drive motor to be remotely mounted thereby providing for easier access to glassware components. Shaft is 48in. in length and can be operated at speeds to 2000 RPM. Heavy duty,.250in.

FLEXIBLE DRIVE SHAFT. 5/16in. male to 3/8in. female adapter. Flexible drive shaft permits the drive motor to be remotely mounted thereby providing for easier access to glassware components. Shaft is 48in. in length and can be operated at speeds to 2000 RPM. Heavy duty,.250in.

FLEXIBLE DRIVE SHAFT. 5/16in. male to 1/2in. female adapter. Flexible drive shaft permits the drive motor to be remotely mounted thereby providing for easier access to glassware components. Shaft is 48in. in length and can be operated at speeds to 2000 RPM. Heavy duty,.250in.

FLEXIBLE DRIVE SHAFT. 5/16in. double male adapter. Flexible drive shaft permits the drive motor to be remotely mounted thereby providing for easier access to glassware components. Shaft is 48in. in length and can be operated at speeds to 2000 RPM. Heavy duty,.250in.

STIRRER SHAFT RETAINER, NYLON. Fits Shaft Size: 10mm. When mounted on stirrer shaft, the retainer acts as a dust cover and also permits blade to be positioned off the bottom of the flask. Supplied complete with one each fluoropolymer resin gasket of the corresponding size.

STIRRER SHAFT RETAINER, NYLON. Fits Shaft Size: 19mm. When mounted on stirrer shaft, the retainer acts as a dust cover and also permits blade to be positioned off the bottom of the flask. Supplied complete with one each fluoropolymer resin gasket of the corresponding size.

FLUOROPOLYMER RESIN GASKET. Fits Shaft Size: 10mm. Thickness: 0.015in. Opening of either 10 or 19mm to fit Chemglass stirrer shafts. Useful as a dust cover or spacers between the fluoropolymer resin blade and glass foot of standard stirrer shafts. Supplied in packages of 12.

FLUOROPOLYMER RESIN GASKET. Fits Shaft Size: 19mm. Thickness: 0.015in. Opening of either 10 or 19mm to fit Chemglass stirrer shafts. Useful as a dust cover or spacers between the fluoropolymer resin blade and glass foot of standard stirrer shafts. Supplied in packages of 12.

STIRRING SHAFT, 10MM, CHEM-STIR. Shaft Complete with fluoropolymer resin Nut and Bolt. For Use With Flask Size: 100 to 5000ml; Overall Length: 460. A 10mm O.D. stirrer shaft with our new Chem-Stir blade attachment system.

STIRRING SHAFT, 10MM, CHEM-STIR. Shaft Complete with fluoropolymer resin Nut and Bolt. For Use With Flask Size: 2000 to 12000ml; Overall Length: 530. A 10mm O.D. stirrer shaft with our new Chem-Stir blade attachment system.

STIRRING SHAFT, 10MM, CHEM-STIR. Shaft Complete with fluoropolymer resin Nut and Bolt. For Use With Flask Size: 5000 to 22000ml; Overall Length: 605. A 10mm O.D. stirrer shaft with our new Chem-Stir blade attachment system.

STIRRING SHAFT, 10MM, CHEM-STIR. Replacement fluoropolymer resin Nut and Bolt for CG-2074. fluoropolymer resin Nut and bolt Set (A&D). A 10mm O.D. stirrer shaft with our new Chem-Stir blade attachment system.

STIRRER SHAFT, 10mm POLISHED. Shaft Length: 405mm. Precision ground and polished shaft for use with fluoropolymer resin bearings and CG-2091 and CG-2092 agitator blades. With a flat ground section half the listed length of the shaft to permit positive seating of fluoropolymer resin locking screws.

STIRRER SHAFT, 10mm POLISHED. Shaft Length: 480mm. Precision ground and polished shaft for use with fluoropolymer resin bearings and CG-2091 and CG-2092 agitator blades. With a flat ground section half the listed length of the shaft to permit positive seating of fluoropolymer resin locking screws.

STIRRER SHAFT, 10mm POLISHED. Shaft Length: 555mm. Precision ground and polished shaft for use with fluoropolymer resin bearings and CG-2091 and CG-2092 agitator blades. With a flat ground section half the listed length of the shaft to permit positive seating of fluoropolymer resin locking screws.

STIRRER BEARING, FLUOROPOLYMER RESIN, 10MM. Replacement Components. Saddle O-ring Only. Grease-Free fluoropolymer resin stirrer bearing designed for use in moderate vacuum applications.

STIRRER BEARING, FLUOROPOLYMER RESIN, 10MM. Replacement Components. fluoropolymer resin Inner Bearing Only. Grease-Free fluoropolymer resin stirrer bearing designed for use in moderate vacuum applications.

STIRRING SHAFT, 10MM, POLISHED, CHEM-STIR . Glass Shaft Complete with fluoropolymer resin Nut and Bolt. Overall Length: 460. For Use With Flask Size: 100 to 5000ml. A 10mm O.D. stirrer shaft with our new Chem-Stir blade attachment system.

STIRRING SHAFT, 10MM, POLISHED, CHEM-STIR . Glass Shaft Complete with fluoropolymer resin Nut and Bolt. Overall Length: 530. For Use With Flask Size: 2000 to 12000ml. A 10mm O.D. stirrer shaft with our new Chem-Stir blade attachment system.

STIRRING SHAFT, 10MM, POLISHED, CHEM-STIR . Glass Shaft Complete with fluoropolymer resin Nut and Bolt. Overall Length: 605. For Use With Flask Size: 5000 to 22000ml. A 10mm O.D. stirrer shaft with our new Chem-Stir blade attachment system.

STIRRER BLADES, FLUOROPOLYMER RESIN, 10MM. WidthxLength: 19x48mm. Fits Flask Size: 100 to 500ml; Minimum Joint Clearance: 24/40. Made of 1/8in. thick solid fluoropolymer resin for use with both Chem-Stir and button style stirring shafts having an O.D. of 10mm.

STIRRER BLADES, FLUOROPOLYMER RESIN, 10MM. WidthxLength: 19x60mm. Fits Flask Size: 250 to 500ml; Minimum Joint Clearance: 24/40. Made of 1/8in. thick solid fluoropolymer resin for use with both Chem-Stir and button style stirring shafts having an O.D. of 10mm.

STIRRER BLADES, FLUOROPOLYMER RESIN, 10MM. WidthxLength: 19x75mm. Fits Flask Size: 500 to 1000ml; Minimum Joint Clearance: 24/40. Made of 1/8in. thick solid fluoropolymer resin for use with both Chem-Stir and button style stirring shafts having an O.D. of 10mm.

STIRRER BLADES, FLUOROPOLYMER RESIN, 10MM. WidthxLength: 24x110mm. Fits Flask Size: 2000 to 3000ml; Minimum Joint Clearance: 29/42. Made of 1/8in. thick solid fluoropolymer resin for use with both Chem-Stir and button style stirring shafts having an O.D. of 10mm.

STIRRER BLADES, FLUOROPOLYMER RESIN, 10MM. WidthxLength: 24x130mm. Fits Flask Size: 5000 to 12000ml; Minimum Joint Clearance: 29/42. Made of 1/8in. thick solid fluoropolymer resin for use with both Chem-Stir and button style stirring shafts having an O.D. of 10mm.

STIRRER BLADES, FLUOROPOLYMER RESIN, 10MM. WidthxLength: 24x160mm. Fits Flask Size: 22000ml; Minimum Joint Clearance: 29/42. Made of 1/8in. thick solid fluoropolymer resin for use with both Chem-Stir and button style stirring shafts having an O.D. of 10mm.

Category