• 0
Shop Products $

Quantifoil S 7/2 200 Mesh, Gold. It Is A Perforated Support Foil With Pre-Defined Hole Size, Shape And Arrangement. It Has Advantages In Electron Microscopy (Em) Or Low-Energy Electron Point Source (Leeps) Microscopy When Compared With Convention

Quantifoil S 7/2 300 Mesh, Copper. It Is A Perforated Support Foil With Pre-Defined Hole Size, Shape And Arrangement. It Has Advantages In Electron Microscopy (Em) Or Low-Energy Electron Point Source (Leeps) Microscopy When Compared With Convention

Quantifoil S 7/2 300 Mesh, Copper. It Is A Perforated Support Foil With Pre-Defined Hole Size, Shape And Arrangement. It Has Advantages In Electron Microscopy (Em) Or Low-Energy Electron Point Source (Leeps) Microscopy When Compared With Convention

Quantifoil S 7/2 300 Mesh, Copper. It Is A Perforated Support Foil With Pre-Defined Hole Size, Shape And Arrangement. It Has Advantages In Electron Microscopy (Em) Or Low-Energy Electron Point Source (Leeps) Microscopy When Compared With Convention

Cathode Lab6 Dnka H2 Htch 90-20U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka H2 Htch 60-20U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka H2 Htch 90-40U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka H2 Htch 60-40U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka H2 Htch 90-60U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka H2 Htch 60-5Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka H2 Htch 60-60U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka H2 Htch 90-80U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka H2 Htch 60-80U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka H2 Htch 90-100. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Denka Lab6 Zeiss 90-20 Flat. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Diamond Knife Histo 8.0Mm 45. For trimming of epoxy and acrylic embeddings as well as polymers and non-ferrous metals.

Diamnd Knife Histo 8Mm Exchng. For trimming of epoxy and acrylic embeddings as well as polymers and non-ferrous metals.

Diamd Knf Histo Jumbo 8.0Mm 45. Easy production of section ribbons (0.5-2m) with no section loss or folding. With same orientation of all sections and easy ribbon collection. Perfect for Immuno-histochemistry

Diamnd Knif Histo Jmb 8Mm Exch. Easy production of section ribbons (0.5-2m) with no section loss or folding. With same orientation of all sections and easy ribbon collection. Perfect for Immuno-histochemistry

Resharpen Jmbhsto Diamd Knf 8Mm 45. Easy production of section ribbons (0.5-2m) with no section loss or folding. With same orientation of all sections and easy ribbon collection. Perfect for Immuno-histochemistry

Resharpen Histo Diamd Knf 8.0Mm 45. For trimming of epoxy and acrylic embeddings as well as polymers and non-ferrous metals.

Cryotrim 20 Tool. For quick, easy and accurate trimming, The Diatome trimming blades are superior.Resharpen knife

Cryotrim 45 Tool. For quick, easy and accurate trimming, The Diatome trimming blades are superior.Resharpen knife

Cryo Im Diamd Knf 4.0Mm 35. Best possible sectioning for cryo-immuno-chemistry. The diamond platform guarantees easy and gentle section collection.

Resharpen Cryo Im Diamd Knf 4Mm 35. Best possible sectioning for cryo-immuno-chemistry. The diamond platform guarantees easy and gentle section collection.

Cryo Im Diamd Knf 3.0Mm 35. Best possible sectioning for cryo-immuno-chemistry. The diamond platform guarantees easy and gentle section collection.

Resharpen Cryo Im Diamd Knf 3Mm 35. Best possible sectioning for cryo-immuno-chemistry. The diamond platform guarantees easy and gentle section collection.

Ultratrim 45Deg. Quick easy and accurate trimming of biological and industrial samples with increased the service time using the new ultratrim 45. The diamond blade for room temperature trimming biological and industrial samples. Knife angle: 45 degree Inclined side facets: 45 degree.

Replacement Back-Up Battery. For use with the LYNX II Automated Tissue Processor.

Static Line Ionizer. The Static Line II ionizer antistatic device emits negative and positive ions, neutralizing the electrostatic charging in the cryochamber. Sections no longer stick to the knife edge, or bunch up, but float in a ribbon over the knife surface.

Ultratrim Dry Room Temp 4.0Mm. Ultratrim for the trimming of epoxy and acrylic embeddings as well as polymers and non-ferrous metals.Resharpen knife

Ultratrim Dry Room Temp 3.0Mm. Ultratrim for the trimming of epoxy and acrylic embeddings as well as polymers and non-ferrous metals.Resharpen knife

Ultratrim Wet Room Temp 4.0Mm. Ultratrim for the trimming of epoxy and acrylic embeddings as well as polymers and non-ferrous metals.Resharpen knife

Ultratrim Wet Room Temp 3.0Mm. Ultratrim for the trimming of epoxy and acrylic embeddings as well as polymers and non-ferrous metals.

Cathode Lab6 Dnka Cmbrd 90-100Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka H2 Htch 60-10U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Htchi 60-100Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrdg 90-80Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrdg 60-80Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrdg 60-60Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrdg 90-60Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrdg 60-5Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrd 60-100Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrdg 90-20Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrdg 60-20Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrdg 90-40Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrdg 60-40Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Flt 90-20U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Flt 60-40U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Flt 90-40U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Shrp 60-5U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Flt 60-60U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Flt 90-60U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Flt 60-80U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Flt 90-80U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Cmbrdg 60-10Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Tough Spots label In Gld 1000/Rl. Tough-Spots are pre-cut peel-off round labels for microcentrifuge tube tops that accept writing from most lab markers. A variety of sizes, colors and formats are available in a convenient dispensing box that assists in labeling.

Tough Spots label In Lav 1000/Rl. Tough-Spots are pre-cut peel-off round labels for microcentrifuge tube tops that accept writing from most lab markers. A variety of sizes, colors and formats are available in a convenient dispensing box that assists in labeling.

Tough Spots label In Marn 1000/Rl. Tough-Spots are pre-cut peel-off round labels for microcentrifuge tube tops that accept writing from most lab markers. A variety of sizes, colors and formats are available in a convenient dispensing box that assists in labeling.

Tough Spots label In Pnk 1000/Rl. Tough-Spots are pre-cut peel-off round labels for microcentrifuge tube tops that accept writing from most lab markers. A variety of sizes, colors and formats are available in a convenient dispensing box that assists in labeling.

Tough Spots label In 5000/Rl. Tough-Spots are pre-cut peel-off round labels for microcentrifuge tube tops that accept writing from most lab markers. A variety of sizes, colors and formats are available in a convenient dispensing box that assists in labeling.

Tough Spots label In Astd 5000/Rl. Tough-Spots are pre-cut peel-off round labels for microcentrifuge tube tops that accept writing from most lab markers. A variety of sizes, colors and formats are available in a convenient dispensing box that assists in labeling.

Direct thermal Label India 1000/Rl. Labels GRIP to wet, frost-covered and frozen surfaces. Are temperature resistant to -40 degreeC, compatible with centrifuge rotors, resistant to chemicals and solvents, adhere to plastics, glass, metals, cardboard.

Laser Sheet label 33X13Mm 1700/Pk. Labels GRIP to wet, frost-covered and frozen surfaces. Are temperature resistant to -40 degreeC, compatible with centrifuge rotors, resistant to chemicals and solvents, adhere to plastics, glass, metals, cardboard.

Laser Sheet label 24X13Mm 2380/Pk. Labels GRIP to wet, frost-covered and frozen surfaces. Are temperature resistant to -40 degreeC, compatible with centrifuge rotors, resistant to chemicals and solvents, adhere to plastics, glass, metals, cardboard.

Laser Sheet label 38X19Mm 1000/Rl. Labels GRIP to wet, frost-covered and frozen surfaces. Are temperature resistant to -40 degreeC, compatible with centrifuge rotors, resistant to chemicals and solvents, adhere to plastics, glass, metals, cardboard.

Laser Sheet label 22X22Mm 1000/Rl. Labels GRIP to wet, frost-covered and frozen surfaces. Are temperature resistant to -40 degreeC, compatible with centrifuge rotors, resistant to chemicals and solvents, adhere to plastics, glass, metals, cardboard.

Cathode Lab6 Dnka Jeol 60-10Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 60-100Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 90-100Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 90-20Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 60-20Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 90-40Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 60-40Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 90-60Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 60-5Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 60-60Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 90-80Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Jeol 60-80Um. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Shp 60-10U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnkakf Flt 60-100U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Flt 90-100. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Cathode Lab6 Dnka Kf Flt 60-20U. Provided with a 90 degree cone angle and a 15m radius round tip. Flat Tip and Sharp tip can be ordered. LaB6 offers ten times the brightness of tungsten, long life (up to 500 hours) and a stability of better than 3% per hour at 1550 degreeC.

Tough Spots label In Coff 1000/Rl. Tough-Spots are pre-cut peel-off round labels for microcentrifuge tube tops that accept writing from most lab markers. A variety of sizes, colors and formats are available in a convenient dispensing box that assists in labeling.

Sem Mnt 1/2In 3-Division 50/Pk. FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan made from lathe finished ultra-pure aluminum. 3-divisions head: 1/2IN dia. (12.7 mm), Pin Height: 9.0 mm, Pin: 1/8IN (3.2m)

Sem Mount 1/2In 3-Divsn 100/Pk. FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan made from lathe finished ultra-pure aluminum. 3-divisions head: 1/2IN dia. (12.7 mm), Pin Height: 9.0 mm, Pin: 1/8IN (3.2m)

Sem Mnt 1/2In 3-Division 10/Pk. FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan made from lathe finished ultra-pure aluminum. 9 divisions head: 1IN dia. (2m), Pin Height: 9.0mm, Pin: 1/8IN dia. (3.2m)

Metallurgical Mount Holder 1In Or 25Mm. Machined aluminum with stainless steel allen screws is specifically for 1IN or 2m metallurgical mounts.

Metallurgical Mount Holder 1In Or25Mm M4. Machined aluminum with stainless steel allen screws is specifically for 1IN or 2m metallurgical mounts.

Metallurgical Mount Holder 1In Or 30Mm. Machined aluminum with stainless steel Alen screws is specifically for 1 1/4IN and 30mm metallurgical mounts.

Metallurgical Mount Holder 1In Or30Mm M4. Machined aluminum with stainless steel Alen screws is specifically for 1 1/4IN and 30mm metallurgical mounts.

Metallurgical Mount Holder 1.5In 40Mm. Machined aluminum with stainless steel allen set screws with an open slot that is 10mm (.394IN) wide x 5m (.197IN) deep. It measures 2m (1IN) dia. X 17.5m (0.69IN) high.

Metallurgical Mount Holder 1.5In40Mm M4. Machined aluminum with stainless steel allen set screws with an open slot that is 10mm (.394IN) wide x 5m (.197IN) deep. It measures 2m (1IN) dia. X 17.5m (0.69IN) high.

Metallurgical Mount Holder 2In Or 50Mm. Machined aluminum with stainless steel allen screws is specifically for 2IN and 5mm metallurgical mounts.

Metallurgical Mount Holder 2In Or50Mm M4. Machined aluminum with stainless steel allen screws is specifically for 2IN and 5mm metallurgical mounts.

Geological Thn Sctn Hldr 9.5Mm. Made from aluminum with copper clips and brass screws. The unit measures 55x30x8mm and holds a standard geological thin section. 2 clips to insure nothing moves. The holder has convenient tweezer inserts which allow for easy loading.

Geological Thn Sctn Hldr M4. Made from aluminum with copper clips and brass screws. The unit measures 55x30x8mm and holds a standard geological thin section. 2 clips to insure nothing moves. The holder has convenient tweezer inserts which allow for easy loading.

Geol Thn Sctn Hldr 9.5Mm Pin. Vacuum grade aluminum with copper clips and brass screws . The unit measures 51x32x8mm and holds 40x2mm to standard 47 x 2mm slides. 2 clips to insure nothing moves. The holder has convenient tweezer inserts which allow for easy loading.

Geol Thn Sctn Hldr Htchi M4. Vacuum grade aluminum with copper clips and brass screws . The unit measures 51x32x8mm and holds 40x2mm to standard 47 x 2mm slides. 2 clips to insure nothing moves. The holder has convenient tweezer inserts which allow for easy loading.

Dual Geol Thn Sctn Hldr 9.5Mm. Aluminum with copper clips and brass screws. The unit measures 55x58x8mm and it holds two standard geological thin sections. Convenient tweezer inserts which allow for easy loading. Clips are provided for secure holding.

Category