• 0
Shop Products $

Dual Geol Thn Sctn Hldr Htchi. Aluminum with copper clips and brass screws. The unit measures 55x58x8mm and it holds two standard geological thin sections. Convenient tweezer inserts which allow for easy loading. Clips are provided for secure holding.

Quad Geol Thn Sctn Hldr Pin. Made from aluminum with copper clips and brass screws. The unit measures 107x58x8mm and it holds four standard geological thin section. Tweezer inserts enable easy loading. Clips are provided for secure holding.

Variable Tilt Mount Hldr Pin. Aluminum mount for the mounting and tilting of samples from 0 degree - 90 degree and samples with small working distances. Mount is marked for 30 deg, 45 deg, 70 deg and 90 deg. table measures 11 x 11mm (0.46IN x0.46IN)and the overall size is 14 x 14 x12.7mm.

8 Pin Stub Hldr 3.2Mm (1/8In). Multi pin holder is made from machined aluminum with stainless steel Allen wrench screws. Accommodates up to eight standard 12.7mm (1/2IN) pin stubs. 5mm.

Stub Hldr 3.2Mm 45 Pin. Accommodates any standard 12.7mm (1/2IN) pin stubs with 3.2m (1/8IN) pin. 45 degree pin stub holder allows for a higher SE signal without tilting the stage. Grooved, machined aluminum with stainless steel Allen set screw.

Fortress Sample Loader.

Ap250 Tngstn Probe Tip 10/Bx. Custom tip designed from tungsten. Tip radius is 0.5m with 6 degree taper angle for maximum lifetime service. Compatible with Short-Cut(TM) system

Xa Tngstn Probe Tip 10/Bx. Custom tip designed from tungsten. Tip radius is 0.5m with 6 degree taper angle for maximum lifetime service. Compatible with Short-Cut(TM) system

Cu Lift Out Grids 100/Vl. Custom copper lift-out grids specifically designed for in-situ lift-out. These grids include multiple indexed mounting locations with both vertical bars and VIN shaped attachment surfaces. 3 mm diameter.

Mo Lift Out Grids 25/Vl. Custom copper lift-out grids specifically designed for in-situ lift-out. These grids include multiple indexed mounting locations with both vertical bars and VIN shaped attachment surfaces. 3 mm diameter.

Beryllium Haft Ring Grids. Custom beryllium haft ring grids, 3mm diameter.

Cu 5-Post Liftout Grid 100/Vl. Specially designed for-in-situ lift-out. These grids include multiple indexed mounting locations, all with vertical bars attachment surfaces. Lower profile sides for easier access. 3mm diameter.

Cu 4-Post Liftout Grid 100/Vl. 4-post lift-out grids for in-situ lift-out. Include multiple indexed mounting locations, two with vertical bars attachment surfaces and two with VIN shaped alignment surfaces. Lower profile sides for easier access. 3mm diameter.

4-Post Liftout Grids Mo 25/Vl. 4-post lift-out grids for in-situ lift-out. Include multiple indexed mounting locations, two with vertical bars attachment surfaces and two with VIN shaped alignment surfaces. Lower profile sides for easier access. 3mm diameter.

Tem Grid Dual Holder Al. Post Base TEM Grid Holder. Short post -standard is 1/8IN (3.2m) diameter x 0.15IN (4mm) length.-Aluminum is non-magnetic.

Em Grid Dual Holder Ss. Post Base TEM Grid Holder. Short post - standard is 1/8IN (3.2m) diameter x 0.15IN (4mm) length.- Stainless Steel is very slightly magnetic.

Tem Grid & Sample Holder Ss. TEM grid holder with stations for 2 TEM grids and 2 sample stubs. Long post - standard is 1/8IN (3.2m) diameter x 0.32IN (8.1mm) length. Comes with 2 sample stubs. Stainless Steel is very slightly magnetic.

Tem Grid & Sample Holder Ss. 2 TEM grids and 1 sample Pin Stub. Long post - standard is 1/8IN (3.2m) diameter x 0.32IN (8.1mm) length. Comes with an aluminum sample stub. Stainless Steel is very slightly magnetic.

Frntsd Thin Cu 45 20/Pk. TEM sample grid coupon designed specially for use in the Short-Cut(TM) tool. The center portion is a standard 3 mm grid into which the sample loaded needle is swaged and cut.

Frntsd Thin Mo/Cu 45 20/Pk. TEM sample grid coupon designed specially for use in the Short-Cut(TM) tool. The center portion is a standard 3 mm grid into which the sample loaded needle is swaged and cut.

Backside Thin Cu 45 20/Pk. TEM sample grid coupon designed specially for use in the Short-Cut(TM) tool. The center portion is a standard 3 mm grid into which the sample loaded needle is swaged and cut.

Backside Thin Mo/Cu 45 20/Pk. TEM sample grid coupon designed specially for use in the Short-Cut(TM) tool. The center portion is a standard 3 mm grid into which the sample loaded needle is swaged and cut.

Frntsd Thin Cu 26.5 20/Pk. TEM sample grid coupon designed specially for use in the Short-Cut(TM) tool. The center portion is a standard 3 mm grid into which the sample loaded needle is swaged and cut.

Frntsd Thin Mo/Cu 26.5 20/Pk. TEM sample grid coupon designed specially for use in the Short-Cut(TM) tool. The center portion is a standard 3 mm grid into which the sample loaded needle is swaged and cut.

Backside Thin Cu 26.5 20/Pk. TEM sample grid coupon designed specially for use in the Short-Cut(TM) tool. The center portion is a standard 3 mm grid into which the sample loaded needle is swaged and cut.

Backsde Thin Mo/Cu 26.5 20/Pk. TEM sample grid coupon designed specially for use in the Short-Cut(TM) tool. The center portion is a standard 3 mm grid into which the sample loaded needle is swaged and cut.

Cu Strght Effectr Type 3 12/Bx. Straight End Effector for Xtreme Access probe shaft.

Slde End Lbl Path Sht 5000/Pk. Available in standard thickness only with square corner on 8-1/2 inch x 11 inch sheet. label size is 15/16 inch x 15/16 inch

Cryobabs Grn 1.5Ml Tbe 1000/Rl. Convenient, dispensing box assists in labeling individual tubes used in small experiments. Easy to write on, PVC labels for use with most lab markers including solvent resistant pens and Teeny writers. 1.5ml tubes. 1.28 inch x 0.50 inch (33mm x 13mm)

Cryobabs Org 1.5Ml Tbe 1000/Rl. Convenient, dispensing box assists in labeling individual tubes used in small experiments. Easy to write on, PVC labels for use with most lab markers including solvent resistant pens and Teeny writers. 1.5ml tubes. 1.28 inch x 0.50 inch (33mm x 13mm)

Cryobabs Ylw 1.5Ml Tbe 1000/Rl. Convenient, dispensing box assists in labeling individual tubes used in small experiments. Easy to write on, PVC labels for use with most lab markers including solvent resistant pens and Teeny writers. 1.5ml tubes. 1.28 inch x 0.50 inch (33mm x 13mm)

Direct Thermal Cryo Spots Dia 4000/Pk. Direct thermal printer label that is temp resistant from -196 degreeC to 70 degreeC and freezable in liquid nitrogen. Adheres to most plastics, glass and metals. Can be used with Dymo LabelWriters.

Direct Thermal Cryotag In Spots 1000/Pk. Direct thermal printer label that is temp resistant from -196 degreeC to 70 degreeC and freezable in liquid nitrogen. Adheres to most plastics, glass and metals. Can be used with Dymo LabelWriters.

Buck Prmry Flow Calbrtr Med. Standard for flow verification and calibration of environmental sampling pumps. Suitable for verifying rotameters, setting instrument panels, and calibrating laboratory instruments.

Bck Prmry Flw Clbrtr Hgh Flw. Standard for flow verification and calibration of environmental sampling pumps. Suitable for verifying rotameters, setting instrument panels, and calibrating laboratory instruments.

Bck Prmr Flw Clbrtr Hgh Flw1/2. Standard for flow verification and calibration of environmental sampling pumps. Suitable for verifying rotameters, setting instrument panels, and calibrating laboratory instruments.

Sensidyne Gilian Bdxii Pump. A dependable, low cost personal sampling pump, designed for use with asbestos and lead sampling. The Gilian BDX II includes a Pump with battery pack, battery charger, tool kit, 36IN tubing, clip assembly and manual.

Gilian Bdxii Pump Batter Pack. Use with Sensidyne Gilian BDXII Pump

Gilian Bdxii Pump Charger. Use with Sensidyne Gilian BDXII Pump

Dual Mcrmtr Calibrtn Sld Postv. Imperial/metric scales calibration slide. 76mm x 2m, positive image, 5mm in 0.1mm divisions and 2IN in 0.005IN divisions, serial numbered, supplied in wooden case. For transmitted light applications and has a bright chrome positive image

Dual Mcrmtr Calibrtn Sld Neg. Imperial/metric scales calibration slide. 76mm x 2m, positive image, 5mm in 0.1mm divisions and 2IN in 0.005IN divisions, serial numbered, supplied in wooden case. Negative pattern, formed in low reflective chrome for incident light applications.

Mcrmtr Scl.1In.001In Div Rflct. Reflected light calibration slide with 0.1IN length scale subdivided into 0.001IN divisions

Ps26 With Ukas Certificate. Reflected light calibration slide with circle shapes and scales for calibrating Brinell hardness testers. This product is supplied in a polished wooden case. Supplied with an Internationally traceable certificate of calibration.

Flowmsh Sht 8.50X11.00In 20/Pk. Permeable support mesh for gels and membranes. Protects gels from tearing, bending or folding, supports gels during incubation, use as a permeable spacer, both sides of a container are assured of constant solution access. 8.50IN x 11.00IN (216mm x 279mm)

Opq Beem Cpsle Hldr Sz 3. If microwaving or UV polymerizing of your embedding media these BEEM capsule holders are perfect. Made from Polypropylene. All embedding capsules size 00 fit it.

Opq Beem Cpsle Hldr Sz 3 6/Pk. If microwaving or UV polymerizing of your embedding media these BEEM capsule holders are perfect. Made from Polypropylene. All embedding capsules size 00 fit it.

Opq Beem Cpsle Hldr Sz 3 12/Pk. If microwaving or UV polymerizing of your embedding media these BEEM capsule holders are perfect. Made from Polypropylene. All embedding capsules size 00 fit it.

Clear Sheet Silicone/Silicone .25Mm 25/Pk. Silicone isolators with removable hydrophobic barrier. For isolating cells grown in culture dishes or separating multiple specimens affixed to microscope slides. Clear Silicone Sheet, Silicone/Silicone, 13x15m x 0.25D

Clear Sheet Silicone/Silicone .5Mm 25/Pk. Silicone isolators with removable hydrophobic barrier. For isolating cells grown in culture dishes or separating multiple specimens affixed to microscope slides. Clear Silicone Sheet, Silicone/Silicone, 13x15m, 0.5m

Clear Sheet Silicone/Silicone .8Mm 25/Pk. Silicone isolators with removable hydrophobic barrier. For isolating cells grown in culture dishes or separating multiple specimens affixed to microscope slides. Clear Silicone Sheet, Silicone/Silicone, 13x15m, 0.8mm

Clear Sheet Silicone/Silicone 1.6Mm 5/Pk. Silicone isolators with removable hydrophobic barrier. For isolating cells grown in culture dishes or separating multiple specimens affixed to microscope slides. Clear Silicone Sheet, Silicone/Silicone, 13x15m, 1.6mmD, 5/pk

Clear Sheet Silicone/Adhs 1.5Mm 25/Pk. Silicone isolators with removable hydrophobic barrier. For isolating cells grown in culture dishes or separating multiple specimens affixed to microscope slides. Clear Silicone Sheet, Silicone/Adhesive, 13x15m, 1.6mm

Clear Sheet Adhs/Adhs .25Mm 25/Pk. Silicone isolators with removable hydrophobic barrier. For isolating cells grown in culture dishes or separating multiple specimens affixed to microscope slides. Clear Silicone Sheet, Adhesive/Adhesive, 13x15m, 0.2m

Cvrgls 1.5 12Mm 75/Pk. The coverglass is affixed to a thin microscopically transparent silicone base which secures to culture vessels by an electrostatic charge. The silicone acts as a hydrophobic barrier to isolate liquid reagents.

Peek Plish Tbe Disply Bx 100Ml. PEEK not only cleans but polishes and protects all metals as well as fiberglass surfaces.

Snap-Top Microtbe Holder 1.5Ml. Accessory for Vortex-Genie 2 and Vortex-Genie 2T.

12 Pack Multi Tbe Rack.

12 Pack Multi Tbe Rack 12/Pk.

Crvd Frcp7 1/8In Med Nsrtd Tip. 6 inch (15mm) stainless steel, medium fine tips, curved and smooth points

Crvd Frcp 7 1/8Inmed Srtd Tips. 6 inch (15mm) stainless steel, medium fine tips, curved and smooth points

Crvd Frcp7 1/8In Fne Nsrtd Tip. EMS Brand, Swiss made forceps from low carbon austenitic steel, corrosion resistance, high quality, curved medium tips.

Crvd Frcp7 1/8In Fine Srtd Tip. EMS Brand, Swiss made forceps from low carbon austenitic steel, corrosion resistance, high quality, curved medium tips.

Extension Rod Ss 1/4 Inx 6In. Accessory for the Wheaton Overhead Stirrer, For use with extension sleeve for lengthening Paddles.

Extension Rod Ss 1/4In X 12In. Accessory for the Wheaton Overhead Stirrer, For use with extension sleeve for lengthening Paddles.

Extension Sleeve Ss 1/4In. Accessory for the Wheaton Overhead Stirrer, for 1/4IN (6.3mm) diameter Rods, with set screws. For use in lengthening Paddles.

Zefon Bio-Pump Plus. Smallest and lightest portable battery powered IAD sampling pump available. It provides the simplest and most convenient way to sample with Air-O-Cell and Via-Cell cassettes at a flow rate of 15 LBM.

Rplcmnt Airocell Flow Indicatr. A convenient, easy to use flow indicator used for calibration of the Zefon Bio-Pump and Bio-Pump Plus

Via-Cell Flow Indicator. A convenient, easy to use flow indicator used for calibration of the Zefon Bio-Pump and Bio-Pump Plus

Bio-Pump Tripod Stand. A heavy duty stand, offering quick and easy attachment of the Bio-Pump

Via-Cell Cassette 10/Pk. For the collection and transport of viable and non-viable bioaerosols. Maintains visibility of the viable mold spores and prevent growth during transport to the laboratory.

Asbestos Pcm Cstt 50/Pk. Designed and manufactured to conform to all NIOSH, OSHA, and EPA standards. Quality 0.8um MCE filter material; 2IN Static conductive extension cowl; Meets NIOSH 7400 specifications; Preloaded - ready-to-use.

Asbestos Pcm Cstt Grd Fltr 50/Pk. Designed and manufactured to conform to all NIOSH, OSHA, and EPA standards. Quality 0.8um MCE filter material; 2IN Static conductive extension cowl; Meets NIOSH 7400 specifications; Preloaded - ready-to-use; Grid lines printed on filter.

Asbestos Pcm Cstt Grn Fltr 50/Pk. Designed and manufactured to conform to all NIOSH, OSHA, and EPA standards. Quality 0.8um MCE filter material; 2IN Static conductive extension cowl; Meets NIOSH 7400 specifications; Preloaded - ready-to-use; Green Grid lines printed on filter.

Asbestos Tem Cstt 50/Pk. Quality 0.45m MCE filter material; 5.0um Filter is placed under the 0.45m filter as a diffuser; 2IN Static conductive extension cowl. Meets NIOSH 7402 specifications; Meets AEHRA requirements; Preloaded - ready-to-use.

Air Sample Filter Mce 2 Pc 50/Pk. Air Sampling Cassette w/MCE Filters are designed to meet all NIOSH, OSHA, and EPA requirements. Preloaded, leak-free design. 2 piece Polystyrene housing.

Air Sample Filter Mce 2Pc Bn 50/Pk. Air Sampling Cassette w/MCE Filters are designed to meet all NIOSH, OSHA, and EPA requirements. Preloaded, leak-free design. 2 piece Polystyrene housing.

Air Smpl Mce Filtr 3Pc 50/Pk. Air Sampling Cassette w/MCE Filters are designed to meet all NIOSH, OSHA, and EPA requirements. Preloaded, leak-free design. 3 piece Polystyrene housing. Suitable for lead sampling.

Air Sample Filter Mce 3Pc Bn 50/Pk. Air Sampling Cassette w/MCE Filters are designed to meet all NIOSH, OSHA, and EPA requirements. Preloaded, leak-free design. 3 piece Polystyrene housing. Suitable for lead sampling.

Air Sample Filter Mce 3 .45 50/Pk. Air Sampling Cassette w/MCE Filters are designed to meet all NIOSH, OSHA, and EPA requirements. Preloaded, leak-free design. 3 piece Polystyrene housing. Suitable for lead sampling.

Air Sample Filter Pvc 5 2Pc 50/Pk. The 37mm Air Sampling Cassette w/PVC Filters are designed to meet all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design Two piece configuration.

Air Sample Filter Pvc 5 3Pc 50/Pk. The 37mm Air Sampling Cassette w/PVC Filters are designed to meet all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design Three piece configuration.

Air Sample Filter Pc .4 2Pc 50/Pk. Air Sampling Cassette meets all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design Two piece configuration.

Air Sample Filter Pc 0.8M 50/Pk. Air Sampling Cassette meets all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design Two piece configuration.

Air Sample Filter Pc 0.4M 50/Pk. Air Sampling Cassette meets all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design Three piece configuration.

Air Sample Filter Pc 0.8M 50/Pk. Air Sampling Cassette meets all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design Three piece configuration.

Air Sample Filter Gf 1M 2Pc 50/Pk. Air Sampling w/polycarbonate Filters are designed to meet all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design Two piece configuration.

Air Sample Filter Gf 1M 3Pc 50/Pk. Air Sampling w/polycarbonate Filters are designed to meet all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design Three piece configuration.

Air Sample Filter PTFE Tf 1 50/Pk. The 37mm Air Sampling Cassette w/PTFE Filters meet all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design. 1.0um pore, 2 piece housing.

Air Sample Filter PTFE Zl 5 50/Pk. The 37mm Air Sampling Cassette w/PTFE Filters meet all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design. 5.0um pore, 3 piece housing.

Air Sample Filter PTFE .45M 50/Pk. The 37mm Air Sampling Cassette w/PTFE Filters meet all NIOSH, OSHA, and EPA requirement for air sampling standards. Polystyrene housing; Preloaded, ready-to-use; Leak-free design. 0.45m pore, 3 piece housing.

Air Sample Filter Qtz .45M 50/Pk. 37mm Air Sampling Cassette w/0.45m Quartz Filters are designed to be used for diesel particulate matter sampling. 3 piece Polystyrene housing; Preloaded, ready-to-use; Leak-free design.

Bioculture Pump 120V. Includes pump, standard 120V charger, pencil torch, carrying case and manual.

Bioculture Pump & Calbrt Kit. Includes pump, calibration head, standard 120V charger, pencil torch, carrying case and manual

Bioculture Calibration Head. NIST traceable venture calibrator with 1% accuracy that allow users to calibrate the flow of the BioCulture pump

Spar Samplng Head Biocultre. Sampling head design of 380 1mm diameter holes. Sampling head may be sterilized by autoclave or gas torch.

Fast One Hour Charger. Optional 1 hour charger available for BioCulture(TM) Microbial Air Sampler

Asbestos Tem Cstt 25Mm. Allows cassettes and cyclones to be attached onto a workers collar. Compatible with 37mm and 2m cassettes, and aluminum cyclone. Weighs 2.5 oz. Comes with 3 feet of tubing attached. Weighs 2.5 oz. Comes with 3 feet of tubing attached.

Cassette Sample Stand Abs-1. Sampling stand used to support cassettes at elevated levels. ABS-1 Deluxe Sampling Stand: very similar to the economy stand but made in the USA from aluminum. Better durability and stability than the economy one.

Cvrgls Opt Btm Tbg Adptr 10/Pk. This Adapter is for connecting the 37mm cassettes to 1 / 4IN ID tubing

Via-Cell Linkng Sltn 15Ml. Sterile liquid used during laboratory preparation when direct microscope will be performed and further culturing may be desirable.

Category