• 0
Shop Products $

CALIBRATED LOOPS, 4MM(D), 70MM(L). calibrated to A.P.H.A. Standards and are made from 19 gauge B&S platinum wire with 5% rhodium, contained volume:0.01ml, loop diameter: 4mm, length: 70mm

CALIBRATED LOOPS, 4MM(D), 25MM(L). calibrated to A.P.H.A. Standards and are made from 19 gauge B&S platinum wire with 5% rhodium, contained volume:0.01ml, loop diameter: 4mm, length: 25mm

REPLACEMENT SWITCH. for Bacti-Cinerator

MICRO SPOON W/RESIN COATED END, EA. made from nickel stainless steel and resin coated handle, wire is 0.103GCY (2.62 mm) in diameter, overall length: 6-+GCY (165 mm), spoon end length: 1GCY (25 mm) x -+GCY (6.35 mm) wide

EMBEDDING BLOCK 4, 51X51X19MM, EA. machined from hard phenolic resin, the faces of the embedding blocks are cut very deeply providing a firm hold of the embedded specimen, suitable for cellodin or paraffin sections

EMBEDDING BLOCK 3, 38X38X25MM, EA. machined from hard phenolic resin, the faces of the embedding blocks are cut very deeply providing a firm hold of the embedded specimen, suitable for cellodin or paraffin sections

EMBEDDING BLOCK 2, 25X25X19MM, EA. machined from hard phenolic resin, the faces of the embedding blocks are cut very deeply providing a firm hold of the embedded specimen, suitable for cellodin or paraffin sections

EMBEDDING BLOCK 1, 19X19X19MM, EA. machined from hard phenolic resin, the faces of the embedding blocks are cut very deeply providing a firm hold of the embedded specimen, suitable for cellodin or paraffin sections

ADJUSTABLE EMBEDDING MOLD, 89X146X25MM. two LGs shape and stainless steel base plate form an adjustable embedding mold, suitable for embedding various size specimens with a minimum of waste material

ADJUSTABLE EMBEDDING MOLD, 22X44X32MM. two LGs shape and stainless steel base plate form an adjustable embedding mold, suitable for embedding various size specimens with a minimum of waste material

ADJUSTABLE EMBEDDING MOLD, 22X44X25MM. two LGs shape and stainless steel base plate form an adjustable embedding mold, suitable for embedding various size specimens with a minimum of waste material

ADJUSTABLE EMBEDDING MOLD, 22X44X19MM. two LGs shape and stainless steel base plate form an adjustable embedding mold, suitable for embedding various size specimens with a minimum of waste material

ADJUSTABLE EMBEDDING MOLD, 22X44X13MM. two LGs shape and stainless steel base plate form an adjustable embedding mold, suitable for embedding various size specimens with a minimum of waste material

SPECIMEN DISC, 5.1CM. Accurately machined chrome plated aluminum discs that fit most microtomes and cryostats, they have a knurled surface for better specimen handling, straight shank, size: 2(5.1cm)

SPECIMEN DISC, 2.2CM. Accurately machined chrome plated aluminum discs that fit most microtomes and cryostats, they have a knurled surface for better specimen handling, straight shank, size: 7/8(2.2cm)

SPECIMEN DISC, 3.8CM. Accurately machined chrome plated aluminum discs that fit most microtomes and cryostats, they have a knurled surface for better specimen handling, straight shank, size: 1-1/2(3.8cm)

MEDIUM HANDLE - NEEDLE FILE. Blue anodized aluminum handles are well knurled with an excellent grip, features a steel easy-release chuck, length: 5-1/2 - 6-1/4, diameter: 1/2, made in the USA

S.S. BIOPSY INSERT, EACH. two-part loose fitting stainless steel capsule with welded mesh that fits inside the processing cassettes preventing the loss of small or friable material while allowing interchange of fluids, measures: 23 mm dia. x 3.5 mm deep,

SMALL HANDLE - NEEDLE FILE. Blue anodized aluminum handles are well knurled with an excellent grip, features a steel easy-release chuck, length: 4, diameter: 3/8, made in the USA

GLASS KNIFE PLIERS. specially designed with jaws ground to a special shape for ease of preparation when making glass knives

GLASS KNIFE SCORING JIG SET. use for making glass knives by hand, T-square jig: the edge of this jig is placed against the edge of the glass knife strip, the- subsequent score will be 26 mm or 1 long, after breaking, the square of the glass can be-score

POWER MAX CUTTERS, 6.5. Ergonomic compound cutters offer the finest in compound leverage construction, Leverage combined with induction-hardened, high-grade steel jaws allows for extra close, flush cutting, handles are shaped to be ergonomic and comfor

MASTER COILER PLIERS, 5.75. designed to make loops and coils without nicking precious wire, hold the wire with the flat jaw while rotating the round jaw, comfort grips, non-rust, highly polished stainless steel jaws and standard step-jaw for consistent

HARDENED STEEL DEBURRING TOOL SET. nickel plated hardened steel mounted in red and black plastic handles, three razor sharp cutting edges range from very sharp point to one approximately 10mm in length, tool length is 30mm by 2.1mm across (1.2x.08),

WIRE LOOPING PLIERS. Stainless steel wire looping pliers, enables the user to bend wire easily, The round jaws in one and the boxjointed for durability, Jaws are finely polished, one being round and the other concave, 5-3/4(145mm) long

SAPPHIRE BURNISHING TOOL. precisely ground sapphire blade 1.5mm x 2.3mm, 14mm long (0.06x0.09x.56), permanently mounted in a hexagonal gold anodized aluminum handle, total length is 120mm (4.75)

DIAMOND POINTS, INVERTED WIDE CONE. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 8.3mm, ISO size: 083

DIAMOND POINTS, TAPERED WHEEL. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 7.3mm, ISO size: 073

DIAMOND POINTS, SQUARE EDGE. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 6.3mm, ISO size: 063

DIAMOND POINTS, TAPERED CONE. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 5.2mm, ISO size: 052

DIAMOND POINTS, CONE SQUARE. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 3.8mm, ISO size: 038

DIAMOND POINTS, FLAT & CYLINDER. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 3.5mm, ISO size: 035

DIAMOND POINTS, LARGE ROUND. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 2.9mm, ISO size: 029

DIAMOND POINTS, INVERTED CONE. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 2.3mm, ISO size: 023

DIAMOND POINTS, CONE. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 2.4mm, ISO size: 024

DIAMOND POINTS, NARROW CONE. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 1.8mm, ISO size: 018

DIAMOND POINTS, SMALL ROUND. All diamond points are mounted on 3/32GCY (2.35mm) shanks, suitable for Flex Shaft machines, use at 10,000 RPM, tip size: 1.3mm, ISO size: 013

ABRASIVE BAND ARBOR, 1/2. Rubber heads on 3/32GCY (2.35mm) shank, band diameter: 1/2(12.7mm)

ABRASIVE BAND ARBOR, 3/8. Rubber heads on 3/32GCY (2.35mm) shank, band diameter: 3/8(9.5mm)

PRESS ON/FLIP OFF MANDRELL. Sanding Disc's Mandrel, made from high quality steel with 3/32(2.35mm) shank

ABRASIVE BAND ARBOR, 1/4. Rubber heads on 3/32GCY (2.35mm) shank, band diameter: 1/4(6.4mm)

UNMOUNTED CUT-OFF WHEEL 1 1/2D; .025T. rubber-bonded aluminum oxide grains, excellent for cut-off work with less heat build-up, mount on mandrels, excellent for use with Flex Shaft Machines, diameter: 1-1/2(38.1mm), thickness: .025(.64mm)

UNMOUNTED CUT-OFF WHEEL 1 1/4D; .062T. rubber-bonded aluminum oxide grains, excellent for cut-off work with less heat build-up, mount on mandrels, excellent for use with Flex Shaft Machines, diameter: 1-1/4(31.8mm), thickness: .062(1.57mm)

UNMOUNTED CUT-OFF WHEEL 1 1/4D; .033T. rubber-bonded aluminum oxide grains, excellent for cut-off work with less heat build-up, mount on mandrels, excellent for use with Flex Shaft Machines, diameter: 1-1/4(31.8mm), thickness: .033(.84mm)

UNMOUNTED CUT-OFF WHEEL 7/8D; .030T. rubber-bonded aluminum oxide grains, excellent for cut-off work with less heat build-up, mount on mandrels, excellent for use with Flex Shaft Machines, diameter: 7/8(22.2mm), thickness: .030(.76mm)

UNMOUNTED CUT-OFF WHEEL 1D; .030T. rubber-bonded aluminum oxide grains, excellent for cut-off work with less heat build-up, mount on mandrels, excellent for use with Flex Shaft Machines, diameter: 1(25.4mm), thickness: .030(.76mm)

DIAMOND STYLUS 0.5MM. Diamond Stylus, 0.50mm, for use with Precision Pin Vise and Collets

DIAMOND STYLUS 0.25MM. Diamond Stylus, 0.25mm, for use with Precision Pin Vise and Collets

DIAMOND SCRIBING TOOL, STRAIGHT TIP, .25MMDIA. Straight tip scriber, for use with Precision Pin Vise and Collets, 0.010GCY (0.25mm) by 0.60GCY (1.5mm) tip length

DIAMOND SCRIBING TOOL, BENT TIP, .50MMDIA. Bent tip scriber, for use with Precision Pin Vise and Collets, 0.020GCY (0.50mm) diameter by 0.60GCY (1.5mm) tip length

DIAMOND SCRIBING TOOL, STRAIGHT, .50MM DIA. straight extended tip scriber for use with Precision Pin Vise and Collets, 0.020GCY (0.50mm) diameter by 0.200GCY(5.0mm) tip length

DIAMOND SCRIBING TOOL, STRAIGHT TIP, .50MMDIA. Straight tip scriber for use with Precision Pin Vise and Collets, 0.020GCY (0.50mm) diameter by 0.60GCY (1.5mm) tip length

DIAMOND SCRIBING TOOL, BENT, .25MM DIA. for use with Precision Pin Vise and Collets, 0.80mm (0.003GCY) diameter mounting shank, 0.10GCY (0.25mm) diameter, 1.5mm tip length

PRECISION PIN-VISE & COLLET. handle is nonrolling gold-anodized aluminum, barrel dimension 8mm hexagonal by 100mm long (0.31x4GCY), length:115mm fully assembled, knurled finger-grip, standard collet chuck opening of 2mm (0.78GCY) diameter and collets adapte

26-PIECE ASSORTMENT SET. Mounted accessories are on 3/32 (2.35mm) arbors

13-PIECE ASSORTMENT SET. Mounted accessories are on 3/32 (2.35mm) arbors

STANDARD FOOT SPEED CONTROL, 220V. Carbon resistance foot operated rheostat for infinity variable motor speeds

HAND PIECE, PROCRAFT. The most popular hand pieces for use, the chuck takes accessory shanks from 0 to 5/32 (0 to 4mm), includes chuck key

EXTENDED REACH MICRO RULER ONLY. surgical stainless steel, only 3 mm wide, calibrated in 0.1 mm graduations, 10 mm total range, 230 mm long, applications include microscopy, chemistry and anywhere precise measurement in clean and very confined areas are

1/10 HP FLEX SHAFT MOTOR, 220V. Motor only comes with Shaft and Sheath

MINIATURE MEASURING SCALE #2. for measuring small specimens, parts, grooves, slots, line widths, holes, chambers, etc, made from stainless steel, welded to bendable stainless steel shafts, color coded, non-rolling handles, length of scale is 83mm (3-+),

1/10 HP FLEX SHAFT MOTOR, 110V. Motor only comes with Shaft and Sheath

1/8 HP FLEX SHAFT MOTOR, 220V. Motor only comes with Shaft and Sheath

REPLACEMENT SHEATH. use for Pro-Craft Fexible Shaft Machine

1/8 HP FLEX SHAFT MOTOR, 110V. Motor only comes with Shaft and Sheath

REPLACEMENT FLEX SHAFT. use for Pro-Craft Fexible Shaft Machine

1/10 HP FLEX SHAFT MACHINE SET, 110V. ball bearing motor, variable speed 0 - 18 RPM, complete kit comes with a hand piece (#62137-02), 39 (1 m) Flexible shaft (#62132-10), variable speed foot pedal (#62138-01), and a bracket for hanging

1/10 HP FLEX SHAFT MACHINE SET, 220V. ball bearing motor, variable speed 0 - 18 RPM, complete kit comes with a hand piece (#62137-02), 39 (1 m) Flexible shaft (#62132-10), variable speed foot pedal (#62138-01), and a bracket for hanging

PROBE HANDLE. finely balanced, non-rolling gold anodized with split collet and a knurled lock nut, length:120mm (4.7)

1/8 HP FLEX SHAFT MACHINE, 220V. ball bearing motor, variable speed 0 - 18 RPM, complete kit comes with a hand piece (#62137-02), 39 (1 m) Flexible shaft (#62132-10), variable speed foot pedal (#62138-01), and a bracket for hanging

1/8 HP FLEX SHAFT MACHINE, 110V. ball bearing motor, variable speed 0 - 18 RPM, complete kit comes with a hand piece (#62137-02), 39 (1 m) Flexible shaft (#62132-10), variable speed foot pedal (#62138-01), and a bracket for hanging

DOUBLE CLAMP WITH STAND. Two adjustable arms with alligator jaws in a heavy base, can be adjusted to any position and firmly holds small items of any shape.

DOUBLE CLAMP W/STAND & MAGNIFIER. Two adjustable arms with alligator jaws in a heavy base, can be adjusted to any position and firmly holds small items of any shape, 2-1/2: diameter magnifier attached

TWEEZERS ONLY. use with Third Hand holder

FILING & POLISHING STICK & STRIP. a plastic handle, 10-+ (267 mm) long, holds strips of emery paper or cloth 11x1 (279x25.4mm), Strips are easily replaced, Comes complete with 2 strips/set (grit 120 and 240)

DIAMOND SCRIBER, BENT, 0.25MM DIA. diamond mountings are 0.8mm dia, shank size of 0.25mm dia which holds the diamond stylus, diamond has 60- included angle and 0.12mm tip radius, integrated 6.35mm anodized hexagonal aluminum handle has positive finger g

BENT, FINE POINT DIAMOND SCRIBER. diamond mountings are 0.8mm diameter with shank size of 0.5mm which holds the diamond stylus, diamond has a 60- included angle and a 0.12mm tip radius, integrated 6.35mm anodized hexagonal aluminum handle has a positive

DIAMOND SCRIBER,STRAIGHT/EXT'ED TIP,5MM. .02GCY (.5mm) dia. by .2GCY(5.0mm) tip length

DIAMOND SCRIBER,STRAIGHT TIP, .25MM. .01GCY (.25mm) dia. by .06GCY (1.5mm) tip length

DIAMOND SCRIBER, STRAIGHT TIP, .5MM. .02GCY (.50mm) dia. by .06GCY (1.5mm) tip length

DIAMOND SCRIBER,STRAIGHT/HEAVY DUTY,8MM. .03GCY (.8mm) dia. by .12GCY (3.1mm) tip length

DIAMOND SCRIBER, BENT TIP, .5MM. .02GCY (.50mm) dia. by .06GCY (1.5mm) tip length

DIAMOND SCRIBER, BENT TIP, .25MM. .01GCY (.25mm) dia. by .06GCY (1.5mm) tip length

DIAMOND SCRIBER, COMPLETE SET. contains eight precision natural diamond scribes in various sizes and configurations, perfect for precision work in microscopy, 3mm in diameter, mounted in interchangeable tool cones and an MT-1 tool handle, hardwood instru

MINI TOOL SET C. three different tools: Straight Scriber with sharp tip, Sharp Triangular Scraper, Bent Prober with sharp tip, integrated hexagonal aluminum handles, tip material is hardened steel, nickel plated, tip size is 0.8mm by 25mm long, length is

MINI TOOL SET B. Contains eight tips with integrated, color-coded handles, tool length is 127mm (5), tip size is 0.8mm (.030), tip material is hardened tool steel, nickel plated, contains: Straight Prober, 30- Prober, 90- Prober, Chisel, Knife, Graver,

MINI TOOL SET A. 5 piece set includes scriber, chisel, knife, triangular scraper and oval graver, each razor sharp, hexagonal anodized aluminum handles, 140mm (5.5) long, hardened tool steel tips, 1.5mm (1/16) diameter, are easily sharpened or pointed,

MICRO NEEDLE. Micro Mirror, polished stainless steel, 4.7mm diameter, 0.5mm stainless steel handle

MICRO CHISEL. Micro-Chisel, 0.5mm cutting width, sharp edge

MICRO KNIFE, 20 DEGREE. Micro Knife, 20 degree, slanted design, 1.3mm cutting edge

MICRO NEEDLE, 45 DEGREE. Micro-Needle, bent 45 degree, bent section is 5mm long, sharp tip

COMPLETE SS MICRO TOOL SET. tools are forged from the finest quality stainless steel and precision hand ground, lapped, and polished, set consists of all 8 tools with mounted tips, one MT handle and one alderwood storage case, case tools are 0.02(0.5mm)

MICRO NEEDLE, STRAIGHT. Micro Needle, straight, tapered from .5mm to a sharp tip

CARBIDE MICRO TOOL SET 1.0MM. tip sizes: 1.0mm(.040) are available in a set only

Tool #21 carbide micro-scraper, 0.12mm.

Tool #13 carbide micro-graver, 0.12mm.

Tool #9 carbide micro-knife 45o, 0.12mm.

Tool #13 carbide micro-graver, 0.25mm.

Tool #9 carbide micro-knife 45o, 0.25mm.

Tool #4 carbide micro-spade, 0.12mm.

Category