• 0
Shop Products $

GROUND JOINT, INNER, WITH HOOKS. Tubing O.D.xWall: 17.0x1.8mm. Joint size: 19/22. Inner joint with two hooks 180[degree] apart just above the grind.

GROUND JOINT, INNER, WITH HOOKS. Tubing O.D.xWall: 22.0x1.8mm. Joint size: 24/40. Inner joint with two hooks 180[degree] apart just above the grind.

GROUND JOINT, OUTER, WITH HOOKS. Tubing O.D.xWall: 19x1.8mm. Joint size: 14/20. Outer joint with two hooks 180[degree] apart just below the grind.

GROUND JOINT, OUTER, WITH HOOKS. Tubing O.D.xWall: 22x1.8mm. Joint size: 19/22. Outer joint with two hooks 180[degree] apart just below the grind.

GROUND JOINT, OUTER, WITH HOOKS. Tubing O.D.xWall: 28x2.0mm. Joint size: 24/40. Outer joint with two hooks 180[degree] apart just below the grind.

SPECIALTY JOINTS. Tubing O.D.xWall: 22x1.8mm; OAL Length: 16in. Joint size: 24/40. Type: Inner. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.

SPECIALTY JOINTS. Tubing O.D.xWall: 28x2.0mm; OAL Length: 16in. Joint size: 24/40. Type: Inner. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.

SPECIALTY JOINTS. Tubing O.D.xWall: 41x2.0mm; OAL Length: 16in. Joint size: 45/50. Type: Drip. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.

SPECIALTY JOINTS. Tubing O.D.xWall: 25x1.5mm; OAL Length: 16in. Joint size: 24/40. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.

SPECIALTY JOINTS. Tubing O.D.xWall: 28x2.0mm; OAL Length: 12in. Joint size: 24/40. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.

SPECIALTY JOINTS. Tubing O.D.xWall: 28x2.0mm; OAL Length: 16in. Joint size: 24/40. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.

SPECIALTY JOINTS. Tubing O.D.xWall: 38x2.0mm; OAL Length: 16in. Joint size: 34/45. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.

SPECIALTY JOINTS. Tubing O.D.xWall: 48x2.0mm; OAL Length: 16in. Joint size: 45/50. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.

SPECIALTY JOINTS. Tubing O.D.xWall: 57x2.4mm; OAL Length: 16in. Joint size: 45/50. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.

SPECIALTY JOINTS. Tubing O.D.xWall: 54x2.4mm; OAL Length: 16in. Joint size: 55/50. Type: Outer. Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105.

GROUND JOINT, INNER, LUER. Tubing O.D.xI.D; 7.5x2.0mm. Inner joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1.

GROUND JOINT, INNER, LUER. Tubing O.D.xI.D; 7.0x4.0mm. Inner joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1.

GROUND JOINT, OUTER, LUER. Tubing O.D.xI.D; 6.5x1.0mm. Outer joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1. Available tooled on three tubing sizes.

GROUND JOINT, OUTER, LUER. Tubing O.D.xI.D; 7.5x2.0mm. Outer joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1. Available tooled on three tubing sizes.

GROUND JOINT, OUTER, LUER. Tubing O.D.xI.D; 8.0x5.0mm. Outer joint manufactured to the same specifications found on medical and research syringes. Complies with Federal Specification CG-S-921b and USAST Standard Z70.1. Available tooled on three tubing sizes.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 14/20. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. CUT DRIP JOINTS. Joint size: 14/20. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 19/22. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. CUT DRIP JOINTS. Joint size: 19/22. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 10/30. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 19/38. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 24/40. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. CUT DRIP JOINTS. Joint size: 24/40. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 29/42. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. CUT DRIP JOINTS. Joint size: 29/42. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 34/45. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. CUT DRIP JOINTS. Joint size: 34/45. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 45/50. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. CUT DRIP JOINTS. Joint size: 45/50. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 50/50. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 55/50. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. CUT DRIP JOINTS. Joint size: 55/50. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, INNER, WITH DRIP TIP. UN-CUT DRIP JOINTS. Joint size: 71/60. Full or medium length standard taper inner joint having a drip tip. Joints are available un-cut or with the drip tip being cut at a 45[degree] angle. Tooled on the same tubing sizes as the CG-100 inner joints.

GROUND JOINT, EXTENDED, DRIP TUBE. Joint size: 10/30. Tubing O.D. Lower: 5mm; Upper: 8mm. Inner joint with a sealed on lower tube extending 6in. below the grind.

GROUND JOINT, EXTENDED, DRIP TUBE. Joint size: 24/40. Tubing O.D. Lower: 12mm; Upper: 20mm. Inner joint with a sealed on lower tube extending 6in. below the grind.

SPHERICAL JOINT, BALL MEMBER. Joint size: 12/2. Clamp Size: 12; Tube O.D; 7.5mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 12/5. Clamp Size: 12; Tube O.D; 8.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 18/7. Clamp Size: 18; Tube O.D; 10.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 18/9. Clamp Size: 18; Tube O.D; 13.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 28/12. Clamp Size: 28; Tube O.D; 16.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 28/15. Clamp Size: 28; Tube O.D; 19.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 35/20. Clamp Size: 35; Tube O.D; 22.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 35/25. Clamp Size: 35; Tube O.D; 28.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 50/30. Clamp Size: 50; Tube O.D; 36.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 65/40. Clamp Size: 65; Tube O.D; 45.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 75/50. Clamp Size: 75; Tube O.D; 58.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, BALL MEMBER. Joint size: 102/75. Clamp Size: 102; Tube O.D; 80.0mm. Made to ASTM Specifications E677. For clamps, see CGS 145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 12/2. Clamp Size: 12; Tube O.D; 7.5mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 12/5. Clamp Size: 12; Tube O.D; 8.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 18/7. Clamp Size: 18; Tube O.D; 10.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 18/9. Clamp Size: 18; Tube O.D; 13.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 28/12. Clamp Size: 28; Tube O.D; 16.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 28/15. Clamp Size: 28; Tube O.D; 19.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 35/20. Clamp Size: 35; Tube O.D; 22.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 35/25. Clamp Size: 35; Tube O.D; 28.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 50/30. Clamp Size: 50; Tube O.D; 36.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 65/40. Clamp Size: 65; Tube O.D; 45.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 75/50. Clamp Size: 75; Tube O.D; 58.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, SOCKET MEMBER. Joint size: 102/75. Clamp Size: 102; Tube O.D; 80.0mm. Made to ASTM Specifications E677. For clamps, see CG-145-B and CG-150.

SPHERICAL JOINT, POLISHED SOCKET MEMBER. Joint size: 12/5. Clamp Size: 12; Tube O.D; 8mm. For use with CG-122, O-ring ball joint to provide for a flexible high vacuum seal. Polished sealing surface does not abrade o-ring. Note: Not for use with CG-120 ground ball joints.

SPHERICAL JOINT, POLISHED SOCKET MEMBER. Joint size: 18/9. Clamp Size: 18; Tube O.D; 12mm. For use with CG-122, O-ring ball joint to provide for a flexible high vacuum seal. Polished sealing surface does not abrade o-ring. Note: Not for use with CG-120 ground ball joints.

SPHERICAL JOINT, POLISHED SOCKET MEMBER. Joint size: 28/12. Clamp Size: 28; Tube O.D; 16mm. For use with CG-122, O-ring ball joint to provide for a flexible high vacuum seal. Polished sealing surface does not abrade o-ring. Note: Not for use with CG-120 ground ball joints.

SPHERICAL JOINT, POLISHED SOCKET MEMBER. Joint size: 28/15. Clamp Size: 28; Tube O.D; 19mm. For use with CG-122, O-ring ball joint to provide for a flexible high vacuum seal. Polished sealing surface does not abrade o-ring. Note: Not for use with CG-120 ground ball joints.

SPHERICAL JOINT, POLISHED SOCKET MEMBER. Joint size: 35/20. Clamp Size: 35; Tube O.D; 22mm. For use with CG-122, O-ring ball joint to provide for a flexible high vacuum seal. Polished sealing surface does not abrade o-ring. Note: Not for use with CG-120 ground ball joints.

SPHERICAL JOINT, POLISHED SOCKET MEMBER. Joint size: 35/25. Clamp Size: 35; Tube O.D; 28mm. For use with CG-122, O-ring ball joint to provide for a flexible high vacuum seal. Polished sealing surface does not abrade o-ring. Note: Not for use with CG-120 ground ball joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 12/3. Clamp Size: 12; O-Ring Size: 011; Tube O.D; 8.5mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 12/5. Clamp Size: 12; O-Ring Size: 011; Tube O.D; 8mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 18/9. Clamp Size: 18; O-Ring Size: 112; Tube O.D; 12mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 28/12. Clamp Size: 28; O-Ring Size: 116; Tube O.D; 16mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 28/15. Clamp Size: 28; O-Ring Size: 116; Tube O.D; 19mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 35/20. Clamp Size: 35; O-Ring Size: 120; Tube O.D; 22mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 35/25. Clamp Size: 35; O-Ring Size: 120; Tube O.D; 28mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 50/30. Clamp Size: 50; O-Ring Size: 128; Tube O.D; 35mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 65/40. Clamp Size: 65; O-Ring Size: 137; Tube O.D; 45mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 75/50. Clamp Size: 75; O-Ring Size: 146; Tube O.D; 58mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINT, O-RING BALL MEMBER. Joint size: 102/75. Clamp Size: 102; O-Ring Size: 238; Tube O.D; 80mm. Ball joint with a Viton o-ring fitted into a groove tooled at the midpoint of the grind. Provides for a flexible, vacuum tight seal when used with CG-121-P polished socket joints.

SPHERICAL JOINTS, BUCHI. Joint Type: Ball; Tube O.D; 34mm. Special S-40 size ball and sockets for use in repairing Buchi rotary evaporator components. Both the ball and socket are tooled on Duran 34mm O.D.x2.8mm wall tubing.

SPHERICAL JOINTS, BUCHI. Joint Type: Socket; Tube O.D; 34mm. Special S-40 size ball and sockets for use in repairing Buchi rotary evaporator components. Both the ball and socket are tooled on Duran 34mm O.D.x2.8mm wall tubing.

JOINT, DEWAR SEAL OUTER. Joint size: 10/18. O.D of Flare: 30mm. Used in construction of apparatus requiring the outer member to be jacketed. Configuration of flare permits seal to be made without having to re-grind the joint.

JOINT, DEWAR SEAL OUTER. Joint size: 14/20. O.D of Flare: 35mm. Used in construction of apparatus requiring the outer member to be jacketed. Configuration of flare permits seal to be made without having to re-grind the joint.

JOINT, DEWAR SEAL OUTER. Joint size: 19/22. O.D of Flare: 40mm. Used in construction of apparatus requiring the outer member to be jacketed. Configuration of flare permits seal to be made without having to re-grind the joint.

JOINT, DEWAR SEAL OUTER. Joint size: 24/40. O.D of Flare: 55mm. Used in construction of apparatus requiring the outer member to be jacketed. Configuration of flare permits seal to be made without having to re-grind the joint.

JOINT, DEWAR SEAL OUTER. Joint size: 29/42. O.D of Flare: 60mm. Used in construction of apparatus requiring the outer member to be jacketed. Configuration of flare permits seal to be made without having to re-grind the joint.

SIDE SEAL JOINT. Joint size: 14/20. Sidearm O.D; 6.35mm; Hole Size: 3mm. Outer joint having a tubulation sealed at the midpoint of the ground portion, and a corresponding hold drilled in the inner joint permitting venting of the side tube when the inner joint is turned to the proper postion.

SIDE SEAL JOINT. Joint size: 19/38. Sidearm O.D; 10.0mm; Hole Size: 4mm. Outer joint having a tubulation sealed at the midpoint of the ground portion, and a corresponding hold drilled in the inner joint permitting venting of the side tube when the inner joint is turned to the proper postion.

SIDE SEAL JOINT. Joint size: 19/38. Sidearm O.D; Two-10mm; Hole Size: 4mm. Outer joint having a tubulation sealed at the midpoint of the ground portion, and a corresponding hold drilled in the inner joint permitting venting of the side tube when the inner joint is turned to the proper postion.

GROUND JOINT, OUTER, SHORT LENGTH. Joint size: 34/15. Tubing O.D; 41mm.

GROUND JOINT, OUTER, SHORT LENGTH. Joint size: 60/15. Tubing O.D; 75mm.

GROUND JOINT, OUTER, SHORT LENGTH. Joint size: 71/15. Tubing O.D; 82mm.

FLANGE, FLAT, GROUND. Size: 57mm; Tube I.D.xO.D; 52x57. Mating end of flange has a ground surface to provide for a liquid tight sealed when greased and clamped with the CG-139 horseshoe clamp.

FLANGE, FLAT, GROUND. Size: 80mm; Tube I.D.xO.D; 75x80. Mating end of flange has a ground surface to provide for a liquid tight sealed when greased and clamped with the CG-139 horseshoe clamp.

FLANGE, FLAT, GROUND. Size: 4.5in.; Tube I.D.xO.D; 99x105. Mating end of flange has a ground surface to provide for a liquid tight sealed when greased and clamped with the CG-139 horseshoe clamp.

FLANGE, FLAT, GROUND. Size: 5.5in.; Tube I.D.xO.D; 130x140. Mating end of flange has a ground surface to provide for a liquid tight sealed when greased and clamped with the CG-139 horseshoe clamp.

CLAMP, PINCH, STAINLESS STEEL, SPHERICAL. Size: 28. Made entirely of stainless steel. Part numbers CG-150-01 and CG-150-03 are supplied WITHOUT a screw type locking device. All other sizes have the screw type locking device.

GROUND JOINT, RODAVISS, INNER. Joint size: 14/20. With tooled ring on shank for use with CG-184 loosening ring. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

Category