• 0
Shop Products $

GROUND JOINT, RODAVISS, INNER. 24/40. With tooled ring on shank for use with CG-184 loosening ring. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

GROUND JOINT, RODAVISS, INNER. Joint size: 45/50. With tooled ring on shank for use with CG-184 loosening ring. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

GROUND JOINT, RODAVISS, OUTER. Joint size: 14/20. Threaded outer to accept CG-182 or CG-186 caps. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

GROUND JOINT, RODAVISS, OUTER. Joint size: 24/40. Threaded outer to accept CG-182 or CG-186 caps. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

GROUND JOINT, RODAVISS, OUTER. Joint size: 45/50. Threaded outer to accept CG-182 or CG-186 caps. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

GROUND JOINT, RODAVISS, INNER WITH DRIP. Joint size: 14/20. Similar to CG-170, but with a drip tip cut at a 45[degree] angle. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

GROUND JOINT, RODAVISS, INNER WITH DRIP. Joint size: 24/40. Similar to CG-170, but with a drip tip cut at a 45[degree] angle. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

GROUND JOINT, RODAVISS, INNER WITH DRIP. Joint size: 45/50. Similar to CG-170, but with a drip tip cut at a 45[degree] angle. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

JOINT CAP, WITH HOLE, RODAVISS. Size: 14. Threaded cap fits CG-172 outer joint. When used with CG-305 Viton o-rings, provides for greaseless high vacuum seal. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

TLC CHROMATOGRAPHY SPRAYER, IMPROVED. REPLACEMENT RODAVISS COMPONENTS FOR CG-1180. 24/40 Open Top Screw Cap. Sprayer provides a fine, uniform spray ideally adjusted for the development of chromatographic patterns.

FLOW CONTROL ADAPTER, CHROMATOGRAPHY, RODAVISS JOINT. REPLACEMENT RODAVISS COMPONENTS FOR CG-1192 THROUGH CG-1195 CHROMATOGRAPHY COLUMNS. 45/50 Open Top Screw Cap. Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs.

SCREW THREAD TUBE, SVL. O.D: 16.2; Height: 11.0; I.D: 10.8; Tubing: 16.0. SVL Size: 15; Tubing O.D.xWall: 15x1.8mm; Overall Length: 165mm. Thread Size: 15. Screw thread tube for replacement of apparatus using the SVL series of glass threads.

SCREW THREAD TUBE, SVL. O.D: 23.0; Height: 12.5; I.D: 17.5; Tubing: 22.0. SVL Size: 22; Tubing O.D.xWall: 22x1.8mm; Overall Length: 165mm. Thread Size: 22. Screw thread tube for replacement of apparatus using the SVL series of glass threads.

SCREW THREAD TUBE, SVL. O.D: 31.4; Height: 17.5; I.D: 24.5; Tubing: 32.0. SVL Size: 30; Tubing O.D.xWall: 32x2.0mm; Overall Length: 165mm. Thread Size: 30. Screw thread tube for replacement of apparatus using the SVL series of glass threads.

REPLACEMENT THREAD, G.P.I.. Tubing O.D; 12mm; Overall Length: 100mm. Thread Size: 13-425. Thread for replacement on apparatus using G.P.I. (Glass Packaging Institute) thread. These threads are used primarily on products manufactured in the United States.

REPLACEMENT THREAD, G.P.I.. Tubing O.D; 16mm; Overall Length: 100mm. Thread Size: 15-425. Thread for replacement on apparatus using G.P.I. (Glass Packaging Institute) thread. These threads are used primarily on products manufactured in the United States.

REPLACEMENT THREAD, G.P.I.. Tubing O.D; 19mm; Overall Length: 125mm. Thread Size: 18-415. Thread for replacement on apparatus using G.P.I. (Glass Packaging Institute) thread. These threads are used primarily on products manufactured in the United States.

REPLACEMENT THREAD, G.P.I.. Tubing O.D; 19mm; Overall Length: 135mm. Thread Size: 20-400. Thread for replacement on apparatus using G.P.I. (Glass Packaging Institute) thread. These threads are used primarily on products manufactured in the United States.

REPLACEMENT THREAD, G.P.I.. Tubing O.D; 22mm; Overall Length: 150mm. Thread Size: 24-410. Thread for replacement on apparatus using G.P.I. (Glass Packaging Institute) thread. These threads are used primarily on products manufactured in the United States.

REPLACEMENT THREAD, G.P.I.. Tubing O.D; 25mm; Overall Length: 125mm. Thread Size: 28-400. Thread for replacement on apparatus using G.P.I. (Glass Packaging Institute) thread. These threads are used primarily on products manufactured in the United States.

REPLACEMENT THREAD, G.P.I.. Tubing O.D; 46mm; Overall Length: 125mm. Thread Size: 51-400. Thread for replacement on apparatus using G.P.I. (Glass Packaging Institute) thread. These threads are used primarily on products manufactured in the United States.

REPLACEMENT THREAD, G.P.I.. Tubing O.D; 100mm; Overall Length: 175mm. Thread Size: 100-440. Thread for replacement on apparatus using G.P.I. (Glass Packaging Institute) thread. These threads are used primarily on products manufactured in the United States.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 10mm; Tube O.D; 13mm; Porosity: Fine. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 10mm; Tube O.D; 13mm; Porosity: Medium. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 10mm; Tube O.D; 13mm; Porosity: Coarse. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 10mm; Tube O.D; 13mm; Porosity: X-Coarse. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 20mm; Tube O.D; 25mm; Porosity: Fine. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 20mm; Tube O.D; 25mm; Porosity: Medium. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 20mm; Tube O.D; 25mm; Porosity: Coarse. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 20mm; Tube O.D; 25mm; Porosity: X-Coarse. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia: 30mm; Tube O.D; 35mm; Porosity: Medium. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 30mm; Tube O.D; 35mm; Porosity: Coarse. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 40mm; Tube O.D; 45mm; Porosity: Medium. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 40mm; Tube O.D; 45mm; Porosity: Coarse. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 50mm; Tube O.D; 54mm; Porosity: Medium. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

GLASSBLOWERS, FRITTED TUBE, STRAIGHT. Disc. Dia; 50mm; Tube O.D; 54mm; Porosity: Coarse. Cylindrical tube with a centered, sealed in fritted disc, used to construct special apparatus.

HOSE CONNECTION, GLASSBLOWERS, DIRECT SEALING. AxBxCxD=3.0x8.0x11x24mm. No of Rings: 4; Tubing O.D; 12. Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on either end of an 8in. length of tubing.

CHEM-THREAD, COMPLETE. Size: 7. Tube O.D: 11mm; Accepts Tubing O.D: 4-7mm; O-Ring Size: 107. Consists of an externally threaded glass tube, Viton o-ring and Celcon compression cap. Tube O.D. listed is the shank O.D. of the connector.

CHEM-THREAD, COMPLETE. Size: 9. Tube O.D: 13mm; Accepts Tubing O.D: 7-9mm; O-Ring Size: 110. Consists of an externally threaded glass tube, Viton o-ring and Celcon compression cap. Tube O.D. listed is the shank O.D. of the connector.

CHEM-THREAD, COMPLETE. Size: 15. Tube O.D: 19mm; Accepts Tubing O.D: 12-15mm; O-Ring Size: 206. Consists of an externally threaded glass tube, Viton o-ring and Celcon compression cap. Tube O.D. listed is the shank O.D. of the connector.

CHEM-THREAD, COMPLETE. Size: 18. Tube O.D: 22mm; Accepts Tubing O.D: 14-18mm; O-Ring Size: 208. Consists of an externally threaded glass tube, Viton o-ring and Celcon compression cap. Tube O.D. listed is the shank O.D. of the connector.

CHEM-THREAD, COMPLETE. Size: 25. Tube O.D: 32mm; Accepts Tubing O.D: 22-25mm; O-Ring Size: 317. Consists of an externally threaded glass tube, Viton o-ring and Celcon compression cap. Tube O.D. listed is the shank O.D. of the connector.

CHEM-THREAD, COMPLETE. Size: 12. Tube O.D: 17mm; Accepts Tubing O.D: 9-12mm; O-Ring Size: 205. Consists of an externally threaded glass tube, Viton o-ring and Celcon compression cap. Tube O.D. listed is the shank O.D. of the connector.

CHEM-THREAD, COMPLETE. Size: 4. Tube O.D: 9mm; Accepts Tubing O.D: 2-4mm; O-Ring Size: 201. Consists of an externally threaded glass tube, Viton o-ring and Celcon compression cap. Tube O.D. listed is the shank O.D. of the connector.

CHEM-THREAD, GLASS PORTION ONLY. Size: 7. O.D. of Tube: 11mm. Threaded glass portion of Chem-Thread only. Chemglass threaded connector is a grease-free method of connection which is an efficient and convenient substitute for a standard ground glass joint.

CHEM-THREAD, GLASS PORTION ONLY. Size: 9. O.D. of Tube: 13mm. Threaded glass portion of Chem-Thread only. Chemglass threaded connector is a grease-free method of connection which is an efficient and convenient substitute for a standard ground glass joint.

CHEM-THREAD, GLASS PORTION ONLY. Size: 15. O.D. of Tube: 19mm. Threaded glass portion of Chem-Thread only. Chemglass threaded connector is a grease-free method of connection which is an efficient and convenient substitute for a standard ground glass joint.

CHEM-THREAD, GLASS PORTION ONLY. Size: 18. O.D. of Tube: 22mm. Threaded glass portion of Chem-Thread only. Chemglass threaded connector is a grease-free method of connection which is an efficient and convenient substitute for a standard ground glass joint.

CHEM-THREAD, GLASS PORTION ONLY. Size: 25. O.D. of Tube: 32mm. Threaded glass portion of Chem-Thread only. Chemglass threaded connector is a grease-free method of connection which is an efficient and convenient substitute for a standard ground glass joint.

CHEM-THREAD, GLASS PORTION ONLY. Size: 12. O.D. of Tube: 17mm. Threaded glass portion of Chem-Thread only. Chemglass threaded connector is a grease-free method of connection which is an efficient and convenient substitute for a standard ground glass joint.

CHEM-THREAD, GLASS PORTION ONLY. Size: 4. O.D. of Tube: 9mm. Threaded glass portion of Chem-Thread only. Chemglass threaded connector is a grease-free method of connection which is an efficient and convenient substitute for a standard ground glass joint.

#7 Internal Thread, Glass only, 12.7mm Tube OD, Accepts 6-7mm OD Tubing. Internal glass thread for use with Chemglass' CG-362 or CG-363 bushings. Tubing O.D. listed is the shank O.D. of the thread

#11 Internal Thread, Glass only, 16mm Tube OD, Accepts 9-10.5mm OD Tubing. Internal glass thread for use with Chemglass' CG-362 or CG-363 bushings. Tubing O.D. listed is the shank O.D. of the thread

#15 Internal Thread, Glass only, 22mm Tube OD, Accepts 12.5-14mm OD Tubing. Internal glass thread for use with Chemglass' CG-362 or CG-363 bushings. Tubing O.D. listed is the shank O.D. of the thread

#25 Internal Thread, Glass only, 32mm Tube OD, Accepts 24-25mm OD Tubing. Internal glass thread for use with Chemglass' CG-362 or CG-363 bushings. Tubing O.D. listed is the shank O.D. of the thread

#50 Internal Thread, Glass only, 57mm Tube OD, Accepts 47-48mm OD Tubing. Internal glass thread for use with Chemglass' CG-362 or CG-363 bushings. Tubing O.D. listed is the shank O.D. of the thread

#7 Internal Bushing, Open Top, 7.5mm Opening, Nylon, #008 Viton O-Ring. Bushing for use with Chemglass' CG-360 internal glass threads. Supplied with one Viton o-ring

#11 Internal Bushing, Open Top, 10mm Opening, Nylon, #012 Viton O-Ring. Bushing for use with Chemglass' CG-360 internal glass threads. Supplied with one Viton o-ring

#15 Internal Bushing, Open Top, 14mm Opening, Nylon, #110 Viton O-Ring. Bushing for use with Chemglass' CG-360 internal glass threads. Supplied with one Viton o-ring

#25 Internal Bushing, Open Top, 26mm Opening, Nylon, #212 Viton O-Ring. Bushing for use with Chemglass' CG-360 internal glass threads. Supplied with one Viton o-ring

#50 Internal Bushing, Open Top, 49mm Opening, Nylon, #225 Viton O-Ring. Bushing for use with Chemglass' CG-360 internal glass threads. Supplied with one Viton o-ring

#11 Internal Bushing, Solid, fluoropolymer resin, #012 Viton O-Ring. Solid bushing for use with Chemglass' CG-360 internal glass threads. Supplied with one Viton o-ring

Fluoropolymer resin Bushing, Internal, Solid. Replacement bushing for Chemglass heavy wall cylindrical and round bottom presure vessels with No. 15 internal glass threads. Supplied with one No. 110 Viton O-ring.

Fluoropolymer resin Bushing, Internal, Solid. Replacement bushing for Chemglass heavy wall cylindrical and round bottom presure vessels with No. 25 internal glass threads. Supplied with one No. 212 Viton O-ring.

#50 Internal Bushing, Solid, fluoropolymer resin, #225 Viton O-Ring. Solid bushing for use with Chemglass' CG-360 internal glass threads. Supplied with one Viton o-ring

VALVE, GLASS PORTION ONLY, 1-ARM. Barrel O.D; 32mm; Sidearm Specifications: 22.0x1.8wall. Bore: 0-20mm. Valve barrel with single sidearm at a 90[degree] angle to the barrel. With precision formed seat and tooled thread. Dimensions as listed.

VALVE, CHEM-DRAIN. Complete Chem-Drain Valve. 6mm Chem-Drain Valve, Complete. The unique design of the Chem-Drain valve incorporates a fluoropolymer resin plunger that allows the contents of the flask to drain directly thru the bore of the plunger (D).

VALVE, CHEM-DRAIN. Complete Chem-Drain Valve. 12mm Chem-Drain Valve, Complete. The unique design of the Chem-Drain valve incorporates a fluoropolymer resin plunger that allows the contents of the flask to drain directly thru the bore of the plunger (D).

VALVE, DRAIN, EXTENDED TIP, CHEM-CAP. 12mm Extended Tip Drain Valve. Designed to be used as a drain for reaction kettles, flasks etc. Valve is made with an extended tip which fills the seat area and permits total agitation of the contents of the vessel.

VALVE, DRAIN, EXTENDED TIP, CHEM-CAP. 20mm Extended Tip Drain Valve. Designed to be used as a drain for reaction kettles, flasks etc. Valve is made with an extended tip which fills the seat area and permits total agitation of the contents of the vessel.

VALVE, DRAIN, EXTENDED TIP, CHEM-CAP. 12mm Replacement Plug Only. Designed to be used as a drain for reaction kettles, flasks etc. Valve is made with an extended tip which fills the seat area and permits total agitation of the contents of the vessel.

VALVE, DRAIN, EXTENDED TIP, CHEM-CAP. 20mm Replacement Plug Only. Designed to be used as a drain for reaction kettles, flasks etc. Valve is made with an extended tip which fills the seat area and permits total agitation of the contents of the vessel.

VALVE, TFE, O-RING, HIGH VACUUM, 1-ARM. Bore: 0-20mm; O-Ring Type: Viton. Valve has single sidearm sealed at a 90[degree] angle to the barrel.

Accessories for Chem-Vacâ„¢, PTFE Stirrer Bearings, Chemglass - CG-2077-G-10, Replacement Bearing Sleeve, 10 mm

Accessories for Chem-Vacâ„¢, PTFE Stirrer Bearings, Chemglass - CG-2077-G-11, Replacement PEEK Compression Spring, 10 mm

Needle. 13 gauge x 2 inch VITA Probe Point Needle.

Drying Tube, [ST] 14/20 Joint, Wheaton, DWK Life Sciences - 970440, [ST] 14/20 Joint Drying Tube

WHEATON® THE WHEATON CONNECTION® Connecting Adapters with Caps, DWK Life Sciences - 125492

WHEATON® THE WHEATON CONNECTION® Connecting Adapters with Caps, DWK Life Sciences - 125494

WHEATON® THE WHEATON CONNECTION® Connecting Adapters with Caps, DWK Life Sciences - 125496

WHEATON® THE WHEATON CONNECTION® Connecting Adapters with Caps, DWK Life Sciences - 125497

WHEATON® THE WHEATON CONNECTION® Connecting Adapters with Caps, DWK Life Sciences - 125499

WHEATON® THE WHEATON CONNECTION® Connecting Adapters with Caps, DWK Life Sciences - 125500

O-RING FOR 1/4IN PROBE PK12 - 1420-0

Viton O-Rings. For use with PTFE adapters and for 3.2mm probes.

KIMAX Culture Tube. Reusable. N51A Borosilicate Glass. Fire-polished top rim. Maximum heat transfer and chemical resistance. Without marking spot. Designed from ASTM Specification E982, Type IV requirement. Size: 13x100mm. Volume: 10ml.

KIMAX Hydrometer Cylinders. 175ml, ungraduated cylinders are made of heavy glass. Pourout lip and hexagonal base. 38mm diameter. 200mm high.

Cylinders Hydrometer with Pourout. Capacity (mL); 340. Approx. Dia. (mm); 38. Approx. Height (mm); 375 KIMAX plain, ungraduated cylinder. With a hexagonal base flat ground for stability. For use, size hydrometer overall length to cylinder height where hydrometer O.D. is smaller than cylinder I.D.

KIMAX Hydrometer Cylinders. 600ml, ungraduated cylinders are made of heavy glass. Pourout lip and hexagonal base. 50mm diameter. 375mm high.

KIMAX Hydrometer Cylinders. 1200ml, ungraduated cylinders are made of heavy glass. Pourout lip and hexagonal base. 63mm diameter. 460mm high.

KIMAX Straight Bore PTFE Stopcock. Replacement straight bore PTFE stopcock.

KIMAX Neoprene Connector. Replacement Neoprene connector for use with Kimax Straight Adapter Tubes.

TUBING GLASS 2.4MM 95MM OD CS - 80200-95

KIMAX KG-33 Standard Wall Glass Tubing. 100mm O.D. borosilicate glass tubing with a low coefficient of expansion and a high resistance to chemical attack. Meets the requirements for Type I Class A, ASTM E438. Cut ends. Wall Thickness: 2.4mm.

KIMAX KG-33 Standard Wall Glass Tubing. 130mm O.D. borosilicate glass tubing with a low coefficient of expansion and a high resistance to chemical attack. Meets the requirements for Type I Class A, ASTM E438. Cut ends. Wall Thickness: 3.5mm.

Tubing, KG-33 Glass. KIMAX special wall tubing, 1.6mm, 14 mm OD, Approximate 0.093 pounds per foot, glazed end finish, Approximate 65 pieces per case (25#). Lengths are 48 -1/4. Corrugated packaging.

Tubing, KG-33 Glass. KIMAX special wall tubing, 2.0 mm, 10 mm OD, Approximate 0.075 pounds per foot, glazed end finish, Approximate 85 pieces per case (25#). Lengths are 48 -1/4. Corrugated packaging.

Category