• 0
Shop Products $

PESTLE 99.5 ALUMINA 100MM PK1

Pluro Stoppers, Kimble Chase - 852050-0070, Set of 7 Neoprene Rubber Pluro Stoppers

Cobalt glass plate, Dark blue, 2 x 2, used in flame tests to block the orange color when doing sodium and potassium salt flame tests

Cobalt glass plate, Dark blue, 3 x 3, used in flame tests to block the orange color when doing sodium and potassium salt flame tests

Glassware Draining Rack - H18805-0000_SE, 26-Place Rack

PYREX® Liebig Condenser - 2340-200, Pyrex® Liebig Condenser, Jacket: 41 mm x 200 mm, Overall Length: 345 mm

CLIPS GLASSWARE SIZE 26 PK10 - CLJP1926PK10

CLIPS GLASSWARE SIZE 32 PK10 - CLJP2932PK10

CLIPS GLASSWARE SIZE 14 PK10 - CLJP1423PK10

Adapter, Beaded Pipe. Aluminum 2.5cm beaded pipe to 12.7mm female NPT.

Neoprene Gasket. Replacement gasket for Model 744 mill, size 000.

PYREX brand, Oil Dilution, [standard taper] Joints, Distilling Apparatus. 5 mL. 380 mm. Graduation:0.1 mL. For determining the amount of dilution in crankcase oils when gasoline has been used as fuel. Designed to allow heat-sensitive materials to be kept away from the hot base of the flask.

PYREX Vacuum Trap. Collects condensables. The top and side of vacuum trap have the same O.D. as the center tube. Sealed-in center tube. Extends to within 25mm of inside bottom of outer tube. [Standard Taper] 50/50. Outer tube (below joint): 48O.D.x250Lmm. Inner tube (below joint): 20O.D.x225Lmm.

KIMAX Glass Stirring Rods. Rounded annealed ends. Designed from Federal Specification NNN-R-560, Type I requirements. Measurements: 375Lx10mm diameter.

Pyrex Brand Ground Joint, Stoppers, Caps And Closures. The 19/38 Stopper Is A Replacement Part For Organic Chemistry Kit No. 6949. Hollow, Full Length Stopper Closed At The Bottom. Interchangeable With Standard Taper Joints.

Synthware Mineral Oil Bubblers, Kemtech America - B257040

Synthware Mineral Oil Bubblers, Kemtech America - B257040L

Synthware Bubblers with Bottom Joint, Kemtech America - B262914

BUBBLER 29/42 24/40 - B262924

Synthware Bubblers with Bottom Hose Connection, Kemtech America - B262910

Accessories for Synthware Filtration Apparatus, Kemtech America - F100002, Replacement Aluminum Clamp, 47 mm

Accessories for Synthware Filtration Apparatus, Kemtech America - F100003, Replacement Support Base, 47 mm Fritted, 40/35

Ribbed Sleeves, Fluoropolymer Resin, Kemtech America - T131420

SLEEVE JOINT RIBBED PTFE 19/22 - T131922

Ribbed Sleeves, Fluoropolymer Resin, Kemtech America - T132440

Ribbed Sleeves, Fluoropolymer Resin, Kemtech America - T132942

Ribbed Sleeves, Fluoropolymer Resin, Kemtech America - T133445

SPRING JOINT SS 6.35MM - TH006

SPRING JOINT SS 25.0MM - TH025

[ST] Joint Clips, Kemtech America - CS002440, Plastic Joint Clip

[ST] Joint Clips, Kemtech America - CS003445, Plastic Joint Clip

Spherical Pinch Clamps, Kemtech America - CC0012

Accessories for Spherical Pinch Clamps, Kemtech America - CC0018, Metal Clamp for 18/8 Spherical Joint

Accessories. Accessories for Synthware Manifold with #15 O-Ring Joints, Kemtech America - CC2815, #15 O-Ring Joint Stainless Steel Clamp

Accessories - CC3525, Clamps for 35/20 Spherical Joints

Accessories for Synthware Pressure Filter Funnels, Kemtech America - CC0050, Clamps for 50/30 Ball Joints

Accessories for Synthware Pressure Filter Funnels, Kemtech America - CC0065, #65 Stainless Steel Pinch Clamp for #40 O-Ring Joint

Accessories for Synthware Pressure Filter Funnels, Kemtech America - CC0075, #75 Stainless Steel Pinch Clamp for #50 O-Ring Joint

Accessories for Synthware Dual Vacuum Trap Assembly with #15 O-Ring Joints, Kemtech America - CC0057, 57 mm Horseshoe Clamp

Accessories for Synthware Sublimation Apparatuses with High Vacuum Valve, Kemtech America - CC0080, 80 mm Flange Horseshoe Clamp

Synthware Thermometer Extension Clamp, Kemtech America - W140200

Synthware Chain Clamp, Kemtech America - W150150, Synthware Chain Clamp

SEPTUM PTFE/SILICONE 8MM - R1408

SEPTUM PTFE/SILICONE 13MM - R1413

SEPTUM PTFE/SILICONE 20MM - R1420

Tubes Culture Disposable Screw-Cap Finish Round Bottom. Approx. O.D. (mm); 16. Approx. Length (mm); 100. Approx. Overflow Capacity (mL); 12. GPI Thread Finish; 15-415 Tubes are suitable for tissue culture work and general bacteriological use. Without a marking area.

PYREX brand, Distilling, 60[degree] Angle, Three [standard taper] Joints, Adapter. 24/40. 206 mm. This tube is also a replacement part for organic chemistry kits No. 6949.

PYREX brand, Connecting, 75[degree] Angle, Three-Way, [standard taper] Joints, Adapter. 14/20. 105 mm. This tube is also a replacement part for organic chemistry kits Nos. 6949E, 6949G-2 and 6949K. The sidearm is at an angle approximately 75[degree] from the lower joint.

PYREX brand, Connecting, 120[degree] Angle, Three-Way, [standard taper] Joints, Adapter. 24/40. 162 mm. This tube is also a replacement part for organic chemistry kits Nos. 6949. The sidearm is at an angle approximately 120[degree] from the lower joint.

KIMAXbrand Stopper. Gray Butyl Rubber, for Aluminum Seal Finish Closure, PTFE-Faced, Fits GPI Aluminum Seal Finish 13

KIMAXbrand Aluminum Seal. Open Top, Color Coded Aluminum Seal, Tear Out, Red Fits GPI Serum Finish 13 mm

Aluminum Seal, Tear-Off. One-piece seals allow easy access to vial contents. Fits GPI finish: 13mm.

O-Ring. Neoprene, 42020.

O-Ring. Neoprene, 42025

Air Sampling Manifolds, Ace Glass Incorporated - 7488-35-12-3, Air Sampling Manifold, with Sampling Port(s)

Micro/Mini-Lab Kit, Deluxe Kits, Ace Glass Incorporated - 9560-30, Complete Kit, All joints are [ST] 14/10

Replacement Sleeves for Laboratory Clamps, Ace Glass. Replacement Sleeves for Laboratory Clamps, Ace Glass Incorporated - 11074-05, Medium, Labjaws Replacement Sleeve Set

Replacement Sleeves for Laboratory Clamps, Ace Glass. Replacement Sleeves for Laboratory Clamps, Ace Glass Incorporated - 11074-09, Large, Labjaws Replacement Sleeve Set

Replacement Sleeves for Laboratory Clamps, Ace Glass. Replacement Sleeves for Laboratory Clamps, Ace Glass Incorporated - 11074-23, Small, Labjaws Replacement Sleeve Set

Replacement Sleeves for Laboratory Clamps, Ace Glass. Replacement Sleeves for Laboratory Clamps, Ace Glass Incorporated - 11074-27, Medium, Labjaws Replacement Sleeve Set

Chemistry, Micro, O-Ring for 0.3/1.0mL Vial and Claisen Adaptor. PYREX brand, Accessories. Listed are additional items most often used in conjunction with the 6949M series. Microscale Organic Chemistry Kits.

Chemistry, Micro, O-Ring for 3.0/5.0mL Vial. PYREX brand, Accessories. Listed are additional items most often used in conjunction with the 6949M series. Microscale Organic Chemistry Kits.

Tubes Culture Disposable Screw-Cap Finish Round Bottom. Approx. O.D. (mm); 16. Approx. Length (mm); 150. Approx. Overflow Capacity (mL); 20. GPI Thread Finish; 15-415 Tubes are suitable for tissue culture work and general bacteriological use. Without a marking area.

Impeller Blade Vortexing Marine Style. Impeller Blade, Vortexing Marine Style, for Bio Reactors, Impeller Type: Vortex (Down), Fits Reactor: 2-3 L, Fits shaft size: 8mm, Impeller Diameter: 43mm, These blades are used primarily for mammalian cell culture work

Impeller Blade Scoping Marine Style. Impeller Blade, Scoping Marine Style, for Bio Reactors, Impeller Type: Scoping (Up), Fits Reactor: 2-3 L, Fits shaft size: 8mm, Impeller Diameter: 43mm, These blades are used primarily for mammalian cell culture work

Unjacketed Bio Reactor Vessel 15L. Unjacketed Bio Reactor Vessel, Capacity: 15L, Material: Glass, Minimum working volume: 2.5L, ID: 222mm, Overall Height: 456mm, constructed of heavy wall tubing and are graduated in 200mL subdivisions with numbers every 1000mL

Headplate for 15L Bio Reactor. Headplate for Bio Reactors, 19 Ports, Capacity: 15L Reactor, Material: 316L stainless steel, electropolished to a mirror finish, with a silicone o-ring that mates to the glass vessel

Agitator Assembly, For Bio Reactors, Vessel Capacity: 15L, Material: 316 Stainless Steel, 15mm OD shaft, Length of shaft through Headplate: 392mm, screws into the M30 thread in the center of the head plate, Design of stirrer ensures contamination free sealing around the shaft

Impeller Blade Vortexing Marine Style. Impeller Blade, Vortexing Marine Style, for Bio Reactors, Impeller Type: Vortex (Down), Fits Reactor: 15L, Fits shaft size: 25mm, Impeller Diameter: 76mm, These blades are used primarily for mammalian cell culture work

Impeller Blade Scoping Marine Style. Impeller Blade, Scoping Marine Style, for Bio Reactors, Impeller Type: Scoping (Up), Fits Reactor: 15L, Fits shaft size: 15mm, Impeller Diameter: 76mm, These blades are used primarily for mammalian cell culture work

Triple Port Adapter, Thread Size: M27, for Bio Reactors, triple inlet assembly fits into an 18mm head plate port, The assembly incorporates three separate pipes into one assembly for efficient use of space. Each port can be used indivually for reagent addition

Septum Holder M27. Septum Holder, Thread Size: M27, for Bio Reactors, supplied with 1 silicone rubber septa and can be used as a universal addition port for fluids or gas. Replacement septa are available

Thermowell 15L. Thermowell, for Bio Reactors, M10, Fits Reactor: 15L, Immersion Length: 370mm, ID: 0.310inch that will accept 1/4inch thermocouple probes, To enhance the temperature measurement the thermowell should be partially filled with a heat conducting silicone or mineral oil

Air Aeration Tube with Sparger. Air Aeration Tube with porous Sparger, For Bioreactor, Fits Reactor: 15L, Immersion: 420mm, Dimension 'A': 93mm, Thread Size: M10, 15 micron sintered metal tip produces tiny air bubbles, 'A' dimension allows for placement in different ports of the headplate.

Sampling Tube, Adjustable, for Bio Reactors, Fits Reactor: 15L, Maximum Immersion Length: 290mm, Thread Size: M10, adjustable to permit the culture fluid to be sampled at any desired level, 1/4inch OD

Blind Stopper M27. Blind Stopper, Size: M27, used to close off any of the unused openings in the head plate, M27 threaded into the ports from the outside, leaving a flat surface

Heat Exchanger 15L. Heat Exchanger, for Bio Reactors, Fits Reactor: 15L, Exchanger style: Loop, fits into two, M10 ports of the headplate

Baffle Assembly 15L Bio Reactor. Baffle Assembly for Bio Reactor, Fits Reactor: 15L, Thread Size: M10, used to increase the mixing efficiency inside the bio reactor. Mounted near the reactor wall for optimum mixing performance

Air Aeration Tube 15L. Air Aeration Tube, for Bio reactor, Fits Reactor: 15L, Length of tube below the Headplate: 420mm, Thread Size: M10, used when high gas flow rates are required. The sparger pipe extends to the bottom of the vessel and terminates just below the impellers on the stirrer shaft

Probe Holder 12mm. Probe Holder, Adjustable height, M27 Thread, for 12mm probes, Thread Size: M27, Height is adjustable with a compression fitting, for Bio Reactors

Impeller Blade Rushton Style 15L. Impeller Blade, Rushton Style, for Bio Reactors, Fits Reactor: 15L, Fits shaft size: 15mm, Impeller Diameter: 76mm, These blades are used primarily for mammalian cell culture work

Probe Holder 12mm. Probe Holder, Fixed height, M27 Thread, for 12mm probes, Thread Size: M27, non-height adjustable, for Bio Reactors

Probe Holder 19mm. Probe Holder, Adjustable height, M27 Thread, for 19mm probes, Thread Size: M27, Height is adjustable with a compression fitting, for Bio Reactors

Harvest Tube 15L. Harvest Tube, for Bio Reactors, Vessel Capacity: 15L, M27 thread with 1/2inch tubing for quicker harvest, mount into outer thread on the standard head plate, design has the tapered tip within 2mm of the bottom of the bio reaction vessel to allow complete harvesting of all cells

Adapter Plate M30. Adapter Plate, M30, for 15L Bioreactor to M30, Allows for the conversion of the 15 liter headplate from a 69mm opening to an M30 thread, thereby accepting the CLS-1385-35 agitator assembly

Agitator Assembly, For Bio Reactors, Vessel Capacity: 15L, Material: 316 Stainless Steel, 8mm OD shaft, Length of shaft through Headplate: 390mm, screws into the M30 thread in the center of the head plate, Design of stirrer ensures contamination free sealing around the shaft

Impeller Blade Scoping Marine Style. Impeller Blade, Scoping Marine Style, for Bio Reactors, Impeller Type: Scoping (Up), Fits Reactor: 15L, Fits shaft size: 8mm, Impeller Diameter: 76mm, These blades are used primarily for mammalian cell culture work

Impeller Blade Rushton Style 15L. Impeller Blade, Rushton Style, for Bio Reactors, Fits Reactor: 15L, Fits shaft size: 8mm, Impeller Diameter: 76mm, These blades are used primarily for mammalian cell culture work

Condenser 250mm OAL. Condenser, Material: Glass, 250mm OAL, Coil-Style, for 15L Bioreactors, economical, Condensers aid in removing moisture from exhaust gases which can clog filters. They also help minimize loss of material from the bioreactor due to evaporation during fermentation

Stabilizer Bar, Set of Three, for 15L Bioreactor Stands, Six-inch long bar attaches to legs of stands and adds an additional measure of safety to the 15 liter bioreactor

Tripod Stand 15L. Tripod Stand for 15L Unjacketed Bio Reactor Vessels, hold bio reaction vessels, with silicone o-ring and six, knurled nuts to attach the headplate to the stand. Top, two-piece ring is made of anodized aluminum while lower ring and legs are electropolished stainless steel.

Tripod Stand 5L. Tripod Stand for 5L Jacketed Bio Reactor Vessels, hold bio reaction vessels, with silicone o-ring and six, knurled nuts to attach the headplate to the stand. Top, two-piece ring is made of anodized aluminum while lower ring and legs are electropolished stainless steel.

Complete Bio Reactor Accessory Kit, single use Bioreactor Accessory kit, fabricated, Non-sterile, Includes: Media Inlet Line Assembly, Sparger Line Assembly, Condenser Vent Line Assembly, Sample Line Assembly, Overlay Gas Assembly, Tri Port Assembly

Sparger Line Assembly, single use Bioreactor Accessory kit component, Non-sterile, packed in an ISO Class 7 clean room, fabricated with full traceability and accompanying validation documentation, which meets USP Class VI requirements, Improved consistency

Condenser Vent Line Assembly, single use Bioreactor Accessory kit component, Non-sterile, packed in an ISO Class 7 clean room, fabricated with full traceability and accompanying validation documentation, which meets USP Class VI requirements, Improved consistency

Sample Line Assembly, single use Bioreactor Accessory kit component, Non-sterile, packed in an ISO Class 7 clean room, fabricated with full traceability and accompanying validation documentation, which meets USP Class VI requirements, Improved consistency

Tri Port Assembly, single use Bioreactor Accessory kit component, Non-sterile, packed in an ISO Class 7 clean room, fabricated with full traceability and accompanying validation documentation, which meets USP Class VI requirements, Improved consistency

Impeller Blade Rushton Style 2-3L. Impeller Blade, Rushton Style, for Bio Reactors, Fits Reactor: 2-3L, Fits shaft size: 8mm, Impeller Diameter: 48mm, These blades are used primarily for mammalian cell culture work

Condenser 165mm OAL. Condenser, Material: Stainless Steel, M18 x 1.5 Thread (Threaded compression nut), 165mm OAL, for 3-5L Bioreactors, Condensers aid in removing moisture from exhaust gases which can clog filters. Minimize loss of material from the bioreactor due to evaporation during fermentation

Category