• 0
Shop Products $

PYREX Solvent Recovery Head. Allows for condensation and collection of solvents while performing concentrations with a Kuderna-Danish. 96-99% solvent recovery allows for concentrations to be done outside the hood. Design allows use of existing condensers and flasks. Ventilation is recommended.

PYREX brand, kjeldahl, Nitrogen, [standard taper] Joints, Distilling Apparatus. Flask only. For condenser only, see No. 2540, size 200 mm, 19/38 joint. Used for determining nitrogen in organic compounds. This assembly includes a kjeldahl flask specifically developed for this process.

PYREX brand, Cyanide, Distilling Apparatus. Inter tube only. Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation and absorbed in a scrubber containing a sodium hydroxide solution.

PYREX brand, Cyanide, Distilling Apparatus. Dispersion Tube Only. Used in testing for soluble and insoluble cyanides in water. Cyanide as hydrocyanic acid (HCN) is released from cyanide complexes by means of a reflux-distillation and absorbed in a scrubber containing a sodium hydroxide solution.

Cyanide Distillation Kit, Component Parts, Cold finger. With sulfide removal. Eliminates the interfering substances in quantitative analysis.

Cyanide Distillation Kit, Component Parts, Flask, 1000mL. With sulfide removal. Eliminates the interfering substances in quantitative analysis.

Cyanide Distillation Kit, Component Parts, Absorber top, [standard taper] 19/38. For removing interfering substances in quantitative analysis for cyanide. The sample is reacted with H2SO4 and MgCl2 which converts any cyanide to HCN.

Cyanide Distillation Kit, Component Parts, Cold finger jacket. With sulfide removal. Eliminates the interfering substances in quantitative analysis.

Cyanide Distillation Kit, Component Parts, Inlet tube. With sulfide removal. Eliminates the interfering substances in quantitative analysis.

Filter Flask, 125mL, Graduated, No. 5 Stopper Joint. These Erlenmeyer style flasks are manufactured from heavy-wall glass to provide the mechanical strength required for vacuum filtration. The side arms are a #2 hose connection that accepts standard 1/4in. (6mm) I.D.

Filter Flask, 1000mL, Safety Coated, No. 8 Stopper Joint. These filter flasks are the same as above, but with Wheaton's plasticol safety coating applied to the outside of the flask. This PVC coating is autoclavable (120[degree]C, 15psi, 15minutes).

Arsine Generator, Modified. With one piece scrubber/absorber unit, Erlenmeyer flask, 125mL, [standard taper] 24/40. For arsine analysis using the silver diethyldithiocarbamate (SDDC) colorimetric method. Without a cumbersome ball and socket joint connecting the scrubber and absorber tubes.

PYREX Replacement Flask. 500ml replacement flask for use with PYREX distilling apparatus (26320-029) with [Standard Taper] 19/38 joint and [Standard Taper] 22 stopper.

PYREX Replacement Flask. 1000ml replacement flask for use with PYREX distilling apparatus (26320-040) with [Standard Taper] 19/38 joint and [Standard Taper] 27 stopper.

PYREX brand, Digestion, Folin-Wu, Tubes. 50.0 mL. 25 x 200 mm. 0.4 +/-mL. Fabricated from specially selected tubing for product durability. Engraved white-filled graduations at 25 and 50mL. Corning's PYREX brand tubes are made of Code No.

PYREX brand, [standard taper] Joints, Allihn Condenser, Extraction Apparatus. Flask Only. 1000 mL. 185 mm. For extractor only,see No 3740. For flask only on sizes 125 thru 500mL, see No 4100.

Concentrators, Kuderna-Danish, PYREX brand, Concentrator Tube, 100mL. Concentrator Tube, Jacketed. 100 mL. Supplied with one Keck clamp. The innovative PYREX brand concentrator tube combines the concepts of a Kuderna Danish flask and tube into one piece of glass apparatus.

PYREX Replacement 47mm PTFE Membranes for Accelerated One-Step Extractor-Concentrator System.

PYREX brand,Accelerated One-Step,Modular, Extraction Apparatus. Coupler Assembly Only,Top/Bottom. U.S. Patent No.5268150 and 5,373,620.

PYREX brand,Accelerated One-Step,Modular, Extraction Apparatus. Photoceram Membrane support only, for 47mm Membrane. U.S. Patent No.5268150 and 5,373,620.

PYREX brand,Accelerated One-Step,Modular, Extraction Apparatus. Connectors/Washers Only, for Stopcock Assembly,Melamine Connectors,fluoropolymer resin Liners,Silicon Washers. U.S. Patent No.5268150 and 5,373,620.

PYREX brand,Filling Bell. 7 OD. 70 mm. For use with culture tubes and bottles.The smaller size will fit tubes upto 20 mm O.D.(without lip).The larger size can be used on bottles with maximum rim diameter of 44mm.

PYREX brand,Filling Bell. 11 OD. 85 mm. For use with culture tubes and bottles.The smaller size will fit tubes upto 20 mm O.D. (without lip).The larger size can be used on bottles with maximum rim diameter of 44mm.

PYREX Brand Boiling Flasks, Long Neck, Flat Bottom. Capacity: 50ml. Stopper number: 1. Borosilicate glass. Tooled mouth ensures uniform stopper fit. Normal working temperature is 230[degree]C.

PYREX Brand Boiling Flasks, Long Neck, Flat Bottom. Capacity: 250ml. Stopper number: 5. Borosilicate glass. Tooled mouth ensures uniform stopper fit. Normal working temperature is 230[degree]C.

PYREX Brand Boiling Flasks, Long Neck, Flat Bottom. Capacity: 1L. Stopper number: 8. Borosilicate glass. Tooled mouth ensures uniform stopper fit. Normal working temperature is 230[degree]C.

PYREX Brand Boiling Flasks, Long Neck, Flat Bottom. Capacity: 2L. Stopper number: 8. Borosilicate glass. Tooled mouth ensures uniform stopper fit. Normal working temperature is 230[degree]C.

PYREX Brand Boiling Flasks, Long Neck, Flat Bottom. Capacity: 6L. Stopper number: 11. Borosilicate glass. Tooled mouth ensures uniform stopper fit. Normal working temperature is 230[degree]C.

PYREX Brand Boiling Flasks, Short Neck, Flat Bottom. Capacity: 12L. Stopper number: 11. Borosilicate glass. Tooled mouth ensures uniform stopper fit. Normal working temperature is 230[degree]C.

PYREX brand Boiling Flask, Short Neck, Flat Bottom, [Standard Taper] Joint. 50mL borosilicate glass flask with full length outer [Standard Taper] 24/40 joint. Normal working temperature is 230[degree]C.

PYREX brand,Low Actinic,Boiling,Flat Bottom,Short Neck,TS joint, Flasks, Boiling. 250 mL. 24/40. 82 x 135 mm.

PYREX brand,Boiling,Round Bottom,Long Neck Tooled Mouth, Flasks, Boiling. 250 mL. 83 x 149 mm. Stopper No.5. Corning provides a number of PYREX brand flasks for special purpose applications. These range from special Kjeldahl boiling flasks to calibration cylinder and flask sets.

PYREX brand,Boiling,Round Bottom,Long Neck Tooled Mouth, Flasks, Boiling. 1000 mL. 130 x 241 mm. Stopper No.8. Corning provides a number of PYREX brand flasks for special purpose applications. These range from special Kjeldahl boiling flasks to calibration cylinder and flask sets.

PYREX brand,Boiling,Round Bottom,Short Ring Neck, Flasks, Boiling. 250 mL. 83 x 120 mm. Stopper No.5. Corning provides a number of PYREX brand flasks for special purpose applications. These range from special Kjeldahl boiling flasks to calibration cylinder and flask sets.

PYREX brand,Boiling,Round Bottom,Short Ring Neck, Flasks, Boiling. 500 mL. 102 x 160 mm. Stopper No.6. Corning provides a number of PYREX brand flasks for special purpose applications. These range from special Kjeldahl boiling flasks to calibration cylinder and flask sets.

PYREX brand,Boiling,Round Bottom,Short Ring Neck, Flasks, Boiling. 3000 mL. 184 x 260 mm. Stopper No.10. Corning provides a number of PYREX brand flasks for special purpose applications. These range from special Kjeldahl boiling flasks to calibration cylinder and flask sets.

PYREX brand,Boiling,Round Bottom,Short Ring Neck, Flasks, Boiling. 12000 mL. 295 x 378 mm. Stopper No.11. Corning provides a number of PYREX brand flasks for special purpose applications. These range from special Kjeldahl boiling flasks to calibration cylinder and flask sets.

PYREX brand,Boiling,Round Bottom,Short Ring Neck, Flasks, Boiling. 22000 mL. 349 x 426 mm. Stopper No.14. Corning provides a number of PYREX brand flasks for special purpose applications. These range from special Kjeldahl boiling flasks to calibration cylinder and flask sets.

PYREX Brand Boiling Flasks, Short Neck, Pear-Shaped. 50ml borosilicate glass flask. Pear-shaped with [Standard Taper] 14/20 joint. Useful for micro-scale distillation.

PYREX Brand Boiling Flasks, Short Neck, Pear-Shaped. 100ml borosilicate glass flask. Pear-shaped with [Standard Taper] 14/20 joint. Useful for micro-scale distillation.

PYREX Brand Boiling Flasks, Short Neck, Round Bottom, [Standard Taper] Joint. 50mL borosilicate glass flask. Full length outer [standard taper] 19/38 joint. Short neck. Normal working temperature is 230[degree]C.

PYREX Brand Boiling Flasks, Short Neck, Round Bottom, [Standard Taper] Joint. 12L borosilicate glass flask. Full length outer [standard taper] 55/50 joint. Short neck. Normal working temperature is 230[degree]C.

PYREX brand, Culture, Low Form, Flasks, Culture. 2500 mL. 254 x 197 mm. Stopper No.6.5. Note: Do not use this flask on a heat source smaller than the base of the flask. Uneven heating of the flask could cause breakage.

PRYEX brand, Culture, Long Neck, Flasks, Culture. Flask 500mL. 38 OD. 101 x 181 mm. Closure fits 250, 500, 1L, 2L. Closure fits 125mL size. The long neck culture flask is basically an Erlenmeyer flask to which a long straight, rimless neck of heavy tubing has been added.

PRYEX brand, Culture, Long Neck, Flasks, Culture. Flask 1000mL. 38 OD. 129 x 216 mm. Closure fits 250, 500, 1L, 2L. Closure fits 125mL size. The long neck culture flask is basically an Erlenmeyer flask to which a long straight, rimless neck of heavy tubing has been added.

PYREX brand Distilling Flask, Four Necks, Vertical Type, Outer [standard taper] Joints. Capacity: 1000 mL. Center Neck Joint: 34/45. Side Neck Joints: 24/40. Approximate O.D.xH: 130x190 mm. The three side necks are placed 90[degree] apart. Use for general laboratory work and organic research.

PYREX brand Distilling Flask, Four Necks, Vertical Type, Outer [standard taper] Joints. Capacity: 2000 mL. Center Neck Joint: 45/50. Side Neck Joints: 24/40. Approximate O.D.xH: 162x235mm. The three side necks are placed 90[degree] apart. Use for general laboratory work and organic research.

PYREX brand Distilling Flask, Four Necks, Vertical Type, Outer [standard taper] Joints. Capacity: 5000 mL. Center Neck Joint: 45/50. Side Neck Joints: 24/40. Approximate O.D.xH: 221x300mm. The three side necks are placed 90[degree] apart. Use for general laboratory work and organic research.

PYREX Church, Distilling, Flasks, Distilling. 500 mL. 102 x 135 mm. Stopper No.5.

PYREX brand Distilling Flask, Vertical Type, Three Necks, [Standard Taper] Joints. 12L. Can be used with a stirring device, condenser, or other apparatus. Made from heavy wall blanks. Full length outer [Standard Taper] joints. Center neck: 55/50 joint. Side necks: 29/42 joints.

PYREX brand, Distilling, Three Necks, Angle Type, [standard taper] Joints, Flasks, Multiple Neck. 1000 mL. 24/40. 130 x 185 mm. Multiple neck flasks are used for general laboratory work and especially for organic research.

PYREX brand, Cyanide, Distilling Apparatus. Two-Neck Boiling Flask, 1L. Used in testing for soluble and insoluble cyanides in water.

PYREXPLUS brand Plastic-Coated Filtering Flasks, Graduated, Heavy Wall. 250mL. Stopper Number: 6. Graduated. Better grip in hands and clamps. PVC coating reduces spill volume. Coating autoclavable to 121[degree]C. Resistant to thermal shock. Tubulation O.D. is 10mm.

PYREX® Filtering Flasks, Heavy Wall, Replaceable Tubulation, Corning® - 5341-250, 250 ml

PYREX brand, Volumetric, Micro, Hexagonal Base, [standard taper] Stopper, Class A, Flask. 1mL. Tolerance: +-0.01mL. Interchangeable Stopper: 8. Base adds stability. Sharp, white markings. Meets ASTM E237 and recommendations of the Committee of Microchemical Apparatus Analytical Division of the ACS.

PYREX brand Volumetric Flask, Class A, Micro, Hexagonal Base, PYREX [standard taper] Stopper. Capacity: 5 mL. Approximate O.D.xH: 17x80mm. Stopper Number: 8. Tolerance: +-0.02 mL.

PYREX brand,Bates,Volumetric,Sugar Analysis,Class A, Short Neck, Flasks,Volumetric. 100 mL. 60 x 130 mm. Sugar Division of the National bureau of standards. 0.08 mL. With a short neck and a slightly flared top.For the preparation of sugar solutions for polarization tests.Conforms to ASTM E-694.

PYREX brand Volumetric Flasks, MCA, [Standard Taper] Stopper, Class A. 250ml. Tolerance: +-0.12ml. [Standard Taper] Stopper: 16. The upper bulb between the stopper and the capacity graduation is approximately 1/10 the flask rated capacity. The bulb assists in the mixing of liquids or powders.

PYREX brand Volumetric Flasks, MCA, [Standard Taper] Stopper, Class A. 2L. Tolerance: +-0.5ml. [Standard Taper] Stopper: 27. The upper bulb between the stopper and the capacity graduation is approximately 1/20 the flask rated capacity. The bulb assists in the mixing of liquids or powders.

PYREX brand, Volumetric, Class A,Screw Cap, Flasks,Volumetric. Cap only. GPI Thread Finish: 18-410.

KIMAX brand Volumetric Flasks, Square, [Standard Taper] Stopper, Class A. 500ml. Tolerance: +-0.2ml. [Standard Taper] Ground Glass Stopper Number: 19. Calibrated to contain. Takes up less area in refrigerators and cabinets. Marking spot. ASTM Specification E288, Class A unserialized.

Microcarrier Spinner Flask, Chemglass - CLS-1430-100, 100 ml, BioProcess Spinner Flask, Dimpled Bottom, Complete

Microcarrier Spinner Flask, Chemglass - CLS-1430-1L, 1000 ml, BioProcess Spinner Flask, Dimpled Bottom, Complete

Microcarrier Spinner Flask, Chemglass - CLS-1430-250, 250 ml, BioProcess Spinner Flask, Dimpled Bottom, Complete

Microcarrier Spinner Flask, Chemglass - CLS-1430-500, 500 ml, BioProcess Spinner Flask, Dimpled Bottom, Complete

FLASK SPINNER 100ML FLAT BOT - CLS-1430-F100

FLASK SPINNER 1000ML FLAT BOT - CLS-1430-F1L

FLASK SPINNER 250ML FLAT BOT - CLS-1430-F250

FLASK SPINNER 3L FLAT BOT - CLS-1430-F3L

Flask Spinner 500Ml Flat Bot. BioProcess Spinner Flask 500mL Flat Bottom Complete

FLASK SPIN 100ML ADJ HANG BAR - CLS-1445-100

FLASK SPIN 250ML ADJ HANG BAR - CLS-1445-250

FLASK SPIN 3000ML ADJ HANG BAR - CLS-1445-3L

FLASK SPIN 500ML ADJ HANG BAR - CLS-1445-500

FLASK SPIN100ML DIMBOT IN IMP - CLS-1450-100

FLASK SPIN1000ML DIMBOT IN IMP - CLS-1450-1L

FLASK SPIN3000ML DIMBOT IN IMP - CLS-1450-3L

Fernbach Culture Flasks, without Baffles, Chemglass - CLS-2020-10, Fernbach Flasks, Plain Top ID 59 mm

Fernbach Culture Flasks, without Baffles, Chemglass - CLS-2020-11, Fernbach Flasks, Delong Top OD 38 mm

Fernbach Culture Flasks, without Baffles, Chemglass - CLS-2020-30, Fernbach Flasks, GL45 Thread, Vented Cap

FLASKFERN 70MM S.C.WOBAF2800ML - CLS-2021-70

FLASKFERN 70MM V.C.WOBAF2800ML - CLS-2021-72

Fernbach Culture Flasks with Baffles, Chemglass - CLS-2022-14, Fernbach Flasks, Plain Top I-Ø 59 mm

Fernbach Culture Flasks with Baffles, Chemglass - CLS-2022-16, Fernbach Flasks, Delong Top O-Ø 38 mm

Fernbach Culture Flasks with Baffles, Chemglass - CLS-2022-31, Fernbach Flasks, GL45 Thread, Vented Cap

FLASKFREN2.8L 70MM 3 SBAF V.C - CLS-2023-72

FLASKFERN 2.8L 59MM ID 3 B.BAF - CLS-2024-15

FLASKFERN 2.8L 38MM OD 3 B.BAF - CLS-2024-17

FLASKFERN2.8L GL45 V.C 3B BAF - CLS-2024-32

FLASKFERN 70MM VC.3 BBAF2800ML - CLS-2025-72

FLASKFERN 2.8L 59MM ID 6 BSBAF - CLS-2026-20

FLASKFERN 2.8L 38MM OD 6 BSBAF - CLS-2026-22

FLASKFERN2.8L GL45 V.C 6BSBAF - CLS-2026-33

FLASKFERN 70MM V.C.6 SBBAF2.8L - CLS-2027-72

Delong Shaker Flasks with Three Extra Deep Side Baffles, Chemglass - CLS-2046-01, 50 ml

Delong Shaker Flasks with Three Extra Deep Side Baffles, Chemglass - CLS-2046-02, 125 ml

Delong Shaker Flasks with Three Extra Deep Side Baffles, Chemglass - CLS-2046-03, 250 ml

Delong Shaker Flasks with Three Extra Deep Side Baffles, Chemglass - CLS-2046-05, 500 ml

Delong Shaker Flasks with Three Extra Deep Side Baffles, Chemglass - CLS-2046-06, 1000 ml

Category