Rxreliance

Scissors straight 5in long blade the 298b-p three star long light duty stainless steel utility scissors with handles made of thermo plastic elastomer - extended tang for durability.

TubePopper, Diversified Biotech - TPOP-1000, TubePopper

Tweezer, replacement tips for 159c-rtw contains 2 tips and 4 screws. acetal has outstanding resistance to chemicals and solvents. it is excellent for cleanroom use.

Tweezer, straight reverse action carbofib esd safe soft replaceable tip tweezer with .012inch wide tips. carbofib is a ptfe based material with 30% carbon fibers added. working temp is 249 degrees f. the overall length is 5inch. it is normally closed at rest.

Tweezer, straight reverse action carbofib esd safe soft replaceable tip tweezer with .060inch wide tips. carbofib is a ptfe based material with 30% carbon fibers added. working temp is 249 degrees f. the overall length is 5inch. it is normally closed at rest.

Tweezer, replacement tips for 116-cf. carbofib with .039 diameter hole.

Tweezer, three star angled tip high precision micro cutting tweezer is designed for maximum visibility when working under magnification. non-reflective esd save epoxy coating prevents oxidation. the cutting capacity is 0.008inch soft copper wire.

Tweezer, one star straight reverse action angled tipped tweezer has fiber handles to protect from heat. the tool is closed at rest. it is ideal for dipping components in a solder bath. it is made of stainless steel. and has a .08inch wide x .05inch high broad serrated tip.

Tweezer, one star 4.25inch straight strong point tweezer with finger serrations for better control. made of anti-magnetic stainless steel.

Tweezer, replacement tips for 179d-rt contains 2 tips and 4 screws. tips are made from copolymer which is esd & cleanroom safe, silicon & chloride free and temperature resistant to 90degree c (185degree f). the shank is made of neverust stainless steel and is anti-magnetic.

Tweezer, straight peek soft replaceable tip tweezers with xxx wide tips. peek is a high temperature thermoplastic with excellent chemical resistance. it is inert to all common solvents and has a working temp of 480 degrees f. overall length is 5inch.

Tweezer, three star angulated tip cutting tweezer for general purpose cutting of soft wire up to 0.010inch. the overall length is 4.5inch. it is made of carbon steel with flame hardened edges. it is coated with an esd safe epoxy coating.

Tweezer, three star angulated tip cutting tweezer for general purpose cutting of soft wire up to 0.010inch. the overall length is 4.5inch. it is made of carbon steel with flame hardened edges. optimum flush cutting blades.

Tweezer, three star 70 degree angled precision point tweezer can be utilized in a variety of applications, such as manipulating very minute components or parts. overall length is 4.5inch. it is made of stainless steel.

Airwave N95 particulate respirator. Plus nuisance ozone/organic vapors, size medium/large, with exclusive adjustable smartstrap, soft foam full flange, easy breathing waves, ultimate flexfit comfort and dura-mesh shell

Low Density Gusseted Poly Liner. Size: 50.8x33x99cm. Clear, 4mil liner. Sort and identify different types of waste. Strong, bottom-sealed liners are free of heavy metals, therefore they are safe for landfill or incineration. Use with 124.9L cans; liner circumference measures 167.6cm.

Wondermask Peelable, Water-Soluble Soldering Mask. 3.8L. Thixotropic, synthetic acrylic latex mask designed to withstand fluxing, wave soldering, and cleaning operations. Antistatic, offers excellent heat stability, no offensive odor. Conforms to MIL-STD-2000 paragraph 5.3.18, parts a, b, & d.

PROWICK BLUE FINE BRAID 5FT - 1804-5F

ProWick Pure Rosin Desoldering Braid. 100% copper wick. Made of finest oxygen-free, oil-free fine gauge wire. Coated with Type R flux, which cleans connections thoroughly during desoldering to ensure maximum solderability. On static-dissipative spools. Color: white. Width: 0.9mm. Length: 3.0m.

ProWick Pure Rosin Desoldering Braid. 100% copper wick. Made of finest oxygen-free, oil-free fine gauge wire. Coated with Type R flux, which cleans connections thoroughly during desoldering to ensure maximum solderability. On static-dissipative spools. Color: green. Width: 1.9mm. Length: 1.5m.

PROWICK BLUE ANTI-STATIC 5FT - 1811-5F

PROWICK A/S BROWN 5FT - 1812-5F

PROWICK RED ANTI-STATIC 5FT - 1813-5F

N CLEAN WICK YELLOW 10FT - 1815-10F

N CLEAN WICK GREEN 10FT - 1816-10F

ProWick No-Clean Desoldering Braid. Removes up to four times more solder than the conventional wick, and extracts the solder much faster than wicks based on Type R fluxes. Residue is halide-free and nonconductive. On static-dissipative spools. Color: yellow. Width: 1.4mm. Length: 1.5m.

ProWick No-Clean Desoldering Braid. Removes up to four times more solder than the conventional wick, and extracts the solder much faster than wicks based on Type R fluxes. Residue is halide-free and nonconductive. On static-dissipative spools. Color: green. Width: 1.9mm. Length: 1.5m.

N CLEAN WICK BROWN A/S 5FT - 1824-5F

N CLEAN WICK RED A/S 5FT - 1825-5F

ProWick Unfluxed Desoldering Braid. Ideal for any soldering process, especially water-soluble applications. Packaged on static-dissipative spools. Meets MIL-F-1425600 Type R, NASA Spec. NHB 5300.4, NPC200-4 and SP-5002. Color: green. Width: 1.4mm. Length: 1.5m.

PROWICK YELLOW FINE BRAID 100F - 1802-100F

PROWICK YELLOW FINE BRAID 25FT - 1802-25F

PROWICK GREEN FINE BRAID 100FT - 1803-100F

PROWICK GREEN FINE BRAID 25FT - 1803-25F

PROWICK GREEN FINE BRAID 500FT - 1803-500F

PROWICK BLUE FINE BRAID 100FT - 1804-100F

PROWICK BLUE FINE BRAID 25FT - 1804-25F

PROWICK RED FINE BRAID 100FT - 1806-100F

PROWICK A/S WHITE 100FT - 1808-100F

ProWick Pure Rosin Desoldering Braid. 100% copper wick. Made of finest oxygen-free, oil-free fine gauge wire. Coated with Type R flux, which cleans connections thoroughly during desoldering to ensure maximum solderability. On static-dissipative spools. Color: yellow. Width: 1.4mm. Length: 7.6m.

PROWICK A/S GREEN 100FT - 1810-100F

PROWICK A/S BLUE 100FT - 1811-100F

PROWICK A/S BLUE 25FT - 1811-25F

N-CLEAN WICK WHITE 100FT - 1814-100F

N CLEAN WICK YELLOW 100FT - 1815-100F

N CLEAN WICK GREEN 100FT - 1816-100F

N CLEAN WICK GREEN 50FT - 1816-50F

N CLEAN WICK BLUE 100FT - 1817-100F

ProWick No-Clean Desoldering Braid. Removes up to four times more solder than the conventional wick, and extracts the solder much faster than wicks based on Type R fluxes. Residue is halide-free and nonconductive. On static-dissipative spools. Color: white. Width: 0.9mm. Length: 15.2m.

N CLEAN WICK A/S YELLOW 25FT - 1821-25F

N CLEAN WICK A/S GREEN 100FT - 1822-100F

N CLEAN WICK A/S BLUE 100FT - 1823-100F

N CLEAN WICK A/S BLUE 25FT - 1823-25F

VAC KT W/3PRB BUNA N/MRKNG CUP - VC-1-B

VCL KT W/3 PRBS + ESD SAFE CUP - VC-1-ESD

Wooden Probe Tool. Orange stick, 17.8cm. Ideal for use in ESD-protected areas. Will not mar delicate surfaces. Minimal charge generation. Temperature-resistant; material will not melt.

Nylon Probe Tool. Orange stick, 17.1cm. Ideal for use in ESD-protected areas. Will not mar delicate surfaces. Minimal charge generation. Temperature-resistant; material will not melt.

Black Nylon Probes, Menda - 35621, Black Nylon Probe, with Spudger

Black Nylon Probes, Menda - 35622, Black Nylon Probe, with Point Blade

Stainless Steel Probe Kit. Set of four tools: 14cm angle probe, and 13.3cm straight, hook, and curved probes. Tools made of nonmagnetic, noncorrosive, conductive 300 series stainless steel. With ergonomic hex handle. ESD-protective. Comes with a pouch that won't tear or break.

Flux and Liquid Cut-to-Size Dispenser. POSGAGLOC leakproof dispenser conveniently dispenses a variety of liquids without dripping, spilling, or waste. Allows you to cut the tip opening to the correct needle size. Capillary ID: 0.13G0.9mm. Volume: 59mL.

Chisel Tip for Weller Soldering Stations and Pencils. Size: 0.8mm. Made to fit Weller WS 80, WSD 80, WSD 130, and WSD 150 soldering stations and WSP 80 and MPR 80 soldering pencils. Corresponds to Weller part number LTH.

Chisel Tip for Weller Soldering Stations and Pencils. Size: 1.3mm. Made to fit Weller WS 80, WSD 80, WSD 130, and WSD 150 soldering stations and WSP 80 and MPR 80 soldering pencils. Corresponds to Weller part number LTK.

Glass Alcohol Burner. Clear glass reservoir affords convenient viewing of fuel level. Adjustable wick height. The metal cap includes a sealing gasket to prevent leakage. The snuff/storage cap reduces fuel evaporation loss. Cotton wick supplied. Capacity: 118ml.

Cotton Wick. Replacement wicks for glass alcohol burners (17805-005).

Utility Cart. HDPE. Enclosed on 3 Sides. L 40 5/8 in 103 3/16 cm. W 40 5/8 in 103 3/16 cm. H 37 13/16 in 96.04 cm. Cap. 300 lb 136.08 kg. Color: Black.

Xtraâ„¢ RubbermaidÂ® Commercial Utility Cart - RCP4091GRA, 300 lbs., Open-Sided

Utility Cart. Versatile, durable cart features ergonomic handles, lockable doors, sliding drawer, and 10.2cm (4) diameter swivel casters. All-plastic construction is easy to clean. Side panels conceal contents. Color: black.

RubbermaidÂ® Commercial Utility Duty Home and Office Cart - RCP440000, 250 lbs.

Dust-Off Xl Pressurized Duster. (Dpsxl) 284G Disposable Can. Flammable; Can Be Ignited Under Certain Circumstances. Designed For General Dusting Away From Laboratories Where Exposure To Bunsen Burners And Other Potential Ignition Sources Is A Concern. ozone Safe. No Cfc'S.

Heat Sealer. 20.3cm. For sealing films and bags. Ideal for laboratory or cleanroom use.

Heat Sealer. 40.6cm. For sealing films and bags. Ideal for laboratory or cleanroom use.

Porta-Vac II Portable Vacuum Wand. Cleanroom and ESD-safe. Molded peek tip handles up to 10.2cm wafers. Features a high-performance pump and standard rear exhaust. Battery-operated with no hoses or cords. Compact and lightweight. Flashing LED indicates low battery.

Porta-Vac II Portable Vacuum Wand Kit. For up to 15.2cm wafers. Includes power adapter, high-performance pump, standard rear exhaust, and molded peek tip for handling wafers. Cleanroom and ESD-safe. Battery-operated, compact, lightweight, uses no hoses or cords. Flashing LED indicates low battery.

Porta-Vac II Portable Vacuum Wand Kit. For up to 20.3cm wafers. Includes power adapter, high-performance pump, standard rear exhaust, and molded peek tip for handling wafers. Cleanroom and ESD-safe. Battery-operated, compact, lightweight, uses no hoses or cords. Flashing LED indicates low battery.

In-Stand Battery Pack and Charger. For use with Porta-Vac II Portable Vacuum Wands. In-stand nickel metal hydride battery pack and charger are designed to charge the 9.6V battery pack while the tool is in stand. Charge time for a depleted battery is 2 hours. LED indicators show status of charge.

Vacuum Cup Kit. High-quality ESD-safe vacuum cups for use in electronics/SMT, optics, mechanical assembly, semiconductor handling and robotics. Made of black Buna-n static dissipative material. With one each of the following diameters: 2.4, 3.175, 6.35, 9.5, 12.7, 15.875 and 19.05.

Fluoropolymer resin-Coated Aluminum Tip. For up to 15.2cm wafers. For use with Porta-Vac II Portable Vacuum Wands (21925-152).

WAFER WAND TIP 6INWFR 5X.20IN - VWT100075-PF

Fluoropolymer resin-Coated Aluminum Tip. For up to 20.32 wafers, for use with Porta-Vac II Portable Vacuum Wands (21925-154).

9.6V INSTND BATPKONLY 3X.8X1.2 - PV2074-RE

VACUUM INTERUPTR+HNDL SZ-6X2IN - V3025