• 0
Shop Products $

5in Anti-shock Shear Cutter. The shear action cut reduces shock on delicate components and solder connections. The stand off keeps the cutting blade from cutting into the solder connections. Tip width .140in. Recommended cutting capacity is 22 AWG (.025in diameter). Standard cut length is .040in.

Shear Cutter and Bender. 5.5in Shear Cutter and Bender designed to cut at a predetermined uniform lead length and bend the lead at the same time. This enables components to stay in place on the circuit board while soldering. For use on .025in or smaller leads.

Soft Tip Straightening Pliers. Five Star 5.25In Very Useful In Straightening Precious Metal Leads And Wires. Soft Tip Material Is Static-Safe And Temperature-Resistant Up To 200[Degree]C. Jaws Are Screwed Onto The Base Plier.

Pliers, Replaceable Tip, Straight, Excelta - 531B-US, Five Star Quality Pliers. Pliers, replaceable tip, 5 star quality

Nylon Jaw Pliers. 5.25in Softip Nylon Jaw Pliers. Nylon jaws are useful in straightening leads and wires when metal-to-metal contact is not desired. Nylon jaws are screwed on and can be replaced when needed.

Pliers, Replaceable Tip, Straight, Excelta - 532B-US, Five Star Quality Pliers. Pliers, replaceable tip, 5 star quality

Delrin Thin Jaw Pliers. 5.5in Softip Delrin Thin Jaw Pliers. The tapered jaw with a small tip is useful in areas where space is limited. Black Delrin material is ESD safe and temperature resistant up to 175deg C. Delrin jaws are screwed on and can be replaced when needed.

Round-Flat Forming Pliers. 5.75in Softip Round-Flat Forming Pliers. These pliers have one round metal jaw and one flat Delrin jaw. Excellent for forming leads and wire when scratching and marring cannot be tolerated. The Delrin jaw is screwed on and can be replaced when needed.

5in Right Hand Angulated Shear Cutter. Carbon steel. Shear action cut reduces shock on delicate solder connections or components. The angle of the cutting head helps increase visibility. Recommended cutting capacity is 22 AWG (.025in) soft wire. Standard cut length: .040in. Molded ergonomic grips.

Excelta Micro Soft Wire Cutting Tweezers With Angulated 80[Degree] Tips. Three Star 4.25 High Precision Tweezers With Extremely Thin Blades For Very Delicate Soft Micro Wire Cutting. Maximum Cutting Capacity: 0.005Mm. Constructed Of High Grade Carbon Steel Alloy.

Lock-in Lead Forming Pliers. 5.25in Lock-In Lead Forming Pliers. Pliers will form an S bend on a component lead, enabling the component to stay in place when soldering. Recommended for .020in diameter or smaller leads and wires.

Lock-in Lead Forming Pliers. 5.25in Lock-In Lead Forming Pliers. Pliers will form an S bend on a component lead, enabling the component to stay in place when soldering. Recommended for .020in diameter or smaller leads and wires.

Pliers, Stress Relief, Excelta - 554AD-US, Five Starâ„¢ Plier. Pliers, stress relief, straight, 5 star quality

Stress Relief Forming Pliers. 4.75in Stress Relief Forming Pliers designed to form standoff on 3 or 5 leads of TO-220 transistors. The angle of the head allows for longer leads to be formed. Recommended for .030in or smaller leads and wires.

Stress Relief Forming Pliers. Five Star 5In Consistent Stress Relief In Variety Of Components. Constructed Of Carbon Steel. For Use On 0.51Mm Or Smaller Diameter Wire.

Pliers, Stress Relief, Excelta - 554EF-US, Five Starâ„¢ Plier. Pliers, stress relief, 5 star quality

Multiple Lead Forming Pliers. 4.75in Multiple Lead Forming Pliers. Stress relief forming pliers for multiple lead components. The offset design makes this tool versatile for many types of components. Opening stop is adjustable for wire diameter.

Radial Lead Stress Relief Forming Pliers. 5 Stress Relief Forming Pliers. Tool will form stress relief in most radial lead components. Designed to form one lead in and one lead out in a single operation. Recommended for .020 diameter or smaller leads and wires.

Radial Lead Stress Relief Forming Pliers. 5 Stress Relief Forming Pliers. Tool will form stress relief in most radial lead components. Designed to form one lead in and one lead out in a single operation. Recommended for .025 diameter or smaller wire.

Lead Forming Pliers. 4.75in Multiple Lead Forming Pliers. Stress relief forming pliers for multiple leads on resistors and transistors. Opening stop is adjustable for wire diameter.

5in Wafer Handling Tweezer with Top Lip. 5in Long tweezer designed for handling 5in wafers. Bent top blade for easy handling of wafers. Made from 300 series Stainless Steel which provides excellent resistance to many acids because of it's high concentration of molybdenum.

Excelta Super Waf-O-Grip Wafer Handling Tweezer. Three Star 5In For 12.7Cm Wafers. 5 Teeth To Minimize Contact With Top Of Chip. Special Sharpened Blade For Easy Pick Up Of Silicon And Gallium Wafers. Special Engaging Stop Prevents Chipping. Antimagnetic, Anti-Acid Neverust Stainless Steel.

Excelta Super Waf-O-Grip Wafer Handling Tweezer With Five Teeth. Two Star 5In For 12.7Cm Wafers. Flouropolymer Resin Pads. Special Sharpened Blade For Easy Pick Up Of Silicon And Gallium Wafers. Special Engaging Stop Prevents Chipping. Antimagnetic, Anti-Acid Neverust Stainless Steel.

5in Bent Handle Wafer Handling Tweezer. 5in Long tweezer with bent handles designed for handling 5in wafers. 5 Tooth bent top blade for easy handling of wafers. Made from 300 series Stainless Steel which provides excellent resistance to many acids because of it's high concentration of molybdenum.

5in Wafer Handling Tweezer with Opening Limit Wire. Designed for handling 5in wafers. 5 tooth blade provides minimum contact with solid grip and limit opening wire. Made from 300 series Stainless Steel provides excellent resistance to many acids because of it's high concentration of molybdenum.

5in Wafer Handling Tweezer with Opening Limit Pin. Designed for handling 5in wafers. 5 tooth blade provides minimum contact with solid grip and limit opening pin. Made from 300 series Stainless Steel provides excellent resistance to many acids because of it's high concentration of molybdenum.

Excelta Super Waf-O-Grip Wafer Handling Tweezer With Five Teeth. Two Star 5In With Special Sharpened Blade For Easy Pick Up Of Silicon And Gallium Wafers. A Special Engaging Stop Prevents Chipping. Constructed Of Antimagnetic, Anti-Acid Neverust Stainless Steel.

Tweezer With Offset Tips. Five Star 4.5In Made Of 40% Cobalt Alloy Material. Body Thickness Of 1Mm. Extremely Light And Strong Tips Of 63-64 Rockwell C Hardness. Noncorrosive And Nonmagnetic. Anti-Glare Satin-Finish Points And Airflow Finger Grooves.

Off-Set Fine Tip High Precision Tweezer. 4.5in Off-set tapered tip tweezer with high precision points are excellent for use limited visibility areas. Made from 400 series Stainless Steel for added durability with some corrosion resistance.

Tweezer With Fine Offset Tips. Two Star 4.5In For Various General-Purpose Uses In Micro-Electronic Assemblies And The Electronics Industry. Constructed Of Antimagnetic Stainless Steel. Length: 114.3Mm.

Tweezer With Fine Offset Tips. One Star 4.5In General-Purpose Tweezers For Handling Parts That Don'T Require Magnification Or A Fine Tip. Constructed Of Antimagnetic Stainless Steel. Length: 114.3Mm.

Economy Off-Set Fine Tip Tweezer. 4.5in Off-set tapered tip tweezer with high precision points are excellent for use limited visibility areas. Made from 400 series Stainless Steel for added durability with some corrosion resistance.

Tweezer With Super Fine Tapered Tips. Five Star 4.25In Made Of 40% Cobalt Alloy Material. Body Thickness Of 1Mm. Extremely Light And Strong Tips Of 63-64 Rockwell C Hardness. Noncorrosive And Nonmagnetic. Anti-Glare Satin-Finish Points And Airflow Finger Grooves.

Excelta Tweezers With Micro-Fine Oblique Angle Tips. Three Star 4.25In Standard Tweezers For Use In Micro-Electronic Assembly. With Circumvented Tips For Greater Visibility Under A Microscope. Constructed Of Antimagnetic Neverust Stainless Steel. Length: 114.3Mm.

Micro Fine Tip High Precision Tweezer. 4.25in Micro fine tapered tip tweezer with high precision points are excellent for use in die attaching and wire bonding. Made from 400 series Stainless Steel for improved durability with some corrosion resistance.

Tweezer With Tapered Micro-Fine Tips. Two Star 4.25In Excellent For Use In Die Attaching And Wire Bonding. Also For Various General-Purpose Uses In Micro-Electronic Assemblies And The Electronics Industry. Constructed Of Antimagnetic Stainless Steel. Length: 108Mm

Tweezer With Tapered Micro-Fine Tips. One Star 4.25In General-Purpose Tweezers For Handling Parts That Don'T Require Magnification Or A Fine Tip. Excellent For Use In Die Attaching And Wire Bonding. Constructed Of Antimagnetic Stainless Steel. Length: 108Mm.

Micro Fine Tip Fine Precision Tweezer. 4.25in Micro fine tapered tip tweezer with high precision points are excellent for use in die attaching and wire bonding. Made from 400 series Stainless Steel for improved durability with some corrosion resistance.

Economy Micro Fine Tip Tweezer. 4.25in Micro fine tapered tip tweezer with high precision points are excellent for use in die attaching and wire bonding. Made from 400 series Stainless Steel for improved durability with some corrosion resistance.

Excelta Tweezers With Long Narrow Precision Point Tips. Three Star 5.25In Standard Tweezers For Use In Micro-Electronic Assembly. Constructed Of Antimagnetic Neverust Stainless Steel. Length: 133Mm.

Straight Tip Tweezer with Fine Precision Points. 4.75in Straight Tip Tweezer with Fine Precision Points. Smooth inside jaws for handling fine parts. The outside finger serrations create a greater feel when wearing gloves. Mede from 300 series Stainless Steel for superior corrosion resistance.

Excelta Tweezers With Oblique Angle Precision Point Tips. Three Star 5.5In Standard Tweezers For Use In Micro-Electronic Assembly. Offers Maximum Surface Clearance And Optimum Visibility, Particularly In Dense Or Confined Areas. Constructed Of Antimagnetic Neverust Stainless Steel.

6in Wafer Handling Tweezer with Top Lip. 5in Long tweezer designed for handling 6in wafers. Bent top blade for easy handling of wafers. Made from 300 series Stainless Steel which provides excellent resistance to many acids because of it's high concentration of molybdenum.

Wafer Handling Tweezers. Two Star 5In Stainless Steel Antimagnetic, Made In Italy. Designed For Handling 6+ Wafers. Straight Top Blade For Minimum Contact With Wafers.

6in Softip Wafer Handling Tweezer. 5in Long tweezer designed for handling 6in wafers. PTFE Softip pad for handling delicate wafers. Made from 300 series Stainless Steel which provides excellent resistance to many acids because of it's high concentration of molybdenum.

6in Bent Handle Wafer Handling Tweezer. 5in Long tweezer with bent handles designed for handling 6in wafers. 6 Tooth bent top blade for easy handling of wafers. Made from 300 series Stainless Steel which provides excellent resistance to many acids because of it's high concentration of molybdenum.

Excelta Super Waf-O-Grip Wafer Handling Tweezer With Six Teeth. Two Star 5In With Special Sharpened Blade For Easy Pick Up Of Silicon And Gallium Wafers. A Special Engaging Stop Prevents Chipping. Constructed Of Antimagnetic, Anti-Acid Neverust Stainless Steel.

Economy Angled Tip Flat Point Tweezers. 4.5in Angled tip tweezers with flat sharp points are useful in picking parts out of waffle trays. Made from 300 series Stainless Steel for excellent corrosion resistance.

Round Head Super Cutter. Five Star 6In Feature Carbon Steel Construction. Tough And Resistant Cutting Edges Hardened And Tempered To 63-65 Rockwell C Hardness. Esd-Safe Cushion Grips With Stainless Steel Leaf Springs. With 14Cm Long Ergonomic Handles. Semi-Flush.

Tapered Head Super Cutter. Five Star 6In Feature Carbon Steel Construction. Tough And Resistant Cutting Edges Hardened And Tempered To 63-65 Rockwell C Hardness. Esd-Safe Cushion Grips With Stainless Steel Leaf Springs. With 14Cm Long Ergonomic Handles. Semi Fl

Tapered Head Super Cutter. Five Star 6In Feature Carbon Steel Construction. Tough And Resistant Cutting Edges Hardened And Tempered To 63-65 Rockwell C Hardness. Esd-Safe Cushion Grips With Stainless Steel Leaf Springs. With 14Cm Long Ergonomic Handles. Maximum

Tapered Relieved Head Super Cutter. Five Star 6In Carbon Steel Construction. Tough And Resistant Cutting Edges Hardened And Tempered To 63-65 Rockwell C Hardness. Esd-Safe Cushion Grips With Stainless Steel Leaf Springs. With 14Cm Long Ergonomic Handles. Semi F

Tapered Relieved Head Super Cutter. Five Star 6In Carbon Steel Construction. Tough And Resistant Cutting Edges Hardened And Tempered To 63-65 Rockwell C Hardness. Esd-Safe Cushion Grips With Stainless Steel Leaf Springs. With 14Cm Long Ergonomic Handles. Optimu

Slim Head Medium Fine Tip Cutter. 6.25in long - Cutting Capacity of .001in - .020in (soft wire).

Relieved Tip Super Cutter. Five Star 6In Carbon Steel Construction. Tough And Resistant Cutting Edges Hardened And Tempered To 63-65 Rockwell C Hardness. Esd-Safe Cushion Grips With Stainless Steel Leaf Springs. Optimum Flush Cut. For Maximum Cutting 30Awg Soft

Large Angulated Head Cutter. 6in Long - Capacity .005-.032 (soft wire).

Small Angled Head Cutter. 6in Long - Capacity of .001in - .018

Relieved Round Head Cutter. 4.75in Long - Cutting capacity of .008in - .045in (soft wire).

Round Head Super Cutter. Five Star 5In Feature Carbon Steel Construction. Tough And Resistant Cutting Edges Hardened And Tempered To 63-65 Rockwell C Hardness. Esd-Safe Cushion Grips With Stainless Steel Leaf Springs. With 10.8Cm Long Handles. Semi Flush Cut.

Maximum Flush Medium Round head Cutter. 5 long ++ Capacity .005-.040 (soft wire).

Round Head Super Cutter. Five Star 5In Feature Carbon Steel Construction. Tough And Resistant Cutting Edges Hardened And Tempered To 63-65 Rockwell C Hardness. Esd-Safe Cushion Grips With Stainless Steel Leaf Springs. With 10.8Cm Long Handles. Optimum Flush Cut

Maximum-Flush Medium Tapered Head Cutter. 5 long ++ Capacity .005-.036 soft wire.

Optimum-Flush Medium Tapered Head Cutter. 5 long - Capacity .002-.028 soft wire.

Semi-Flush Medium Tapered/Relieved Cutter. 5 long - Capacity .008-.036 soft wire.

Cutter. Five Star 5In Tapered Relief Head Cutters. Carbon Steel. Overall Length 4.25 In. Joint Lap. Grip Esd. Measurements: A 0.400In, B 0.440In, D 0.350In, E 0.030In, F 74 Deg.

Tapered Relieved Head Super Cutter. Five Star 5In Carbon Steel Construction. Tough And Resistant Cutting Edges Hardened And Tempered To 63-65 Rockwell C Hardness. Esd-Safe Cushion Grips With Stainless Steel Leaf Springs. With 10.8Cm Long Handles. Optimum Flush

Tapered Relieved Head Super Tip-O-Dyke Cutter. Five Star 5In Carbon Steel Construction. Tough And Resistant Cutting Edges Hardened And Tempered To 63-65 Rockwell C Hardness. Esd-Safe Cushion Grips With Stainless Steel Leaf Springs. Optimum Full Flush Cut. For

Cutters, Long Nose Fine Tip, Excelta . Five-Starâ„¢ Cutters, Taper Tip, Excelta - 7270EA, Cutters, long nose fine tip, relieved head, 5 star quality. Small Relieved Fine Tip Cutters

Miniature Fine Tip Cutter. 5.25in long - Cutting Capacity of .001in - .010in (soft wire).

Large Angulated Head Cutter. 5.25in Long - Capacity of .005in - .032in (soft wire).

Small Angulated Head Cutter. 5.25in Long - Capacity of .001in - .018in (soft wire).

Serrated Curved Tip. 4.5 Long ++ CTM ++ 0.0027in wide x 0.0012in high.

Serrated Curved Tip High Precision Tweezer. 4.5in Curved tip high precision point tweezers allow for maximum visibility under magnification. Serrated inside edges provides better gripping of small components/wires. Made from 400 Stainless Steel for added durability with mild corrosion resistance.

Serrated Curved Tip Fine Precision Tweezer. 4.5in Curved tip high precision point tweezers allow for maximum visibility under magnification. Serrated inside edges provides better gripping of small components and wires. Made from 300 series Stainless Steel for excellent corrosion resistance.

Tweezer With Curved Fine Tips. Five Star 4.5In Made Of 40% Cobalt Alloy Material. Body Thickness Of 1Mm. Extremely Light And Strong Tips Of 63-64 Rockwell C Hardness. Noncorrosive And Nonmagnetic. Anti-Glare Satin-Finish Points And Airflow Finger Grooves.

Curved Tip Fine Precision Tweezer. 4.5in Curved tip high precision point tweezers allow for maximum visibility under magnification. Made from Carbon Steel with flame hardened tips for maximum durability.

Curved Tip High Precision Tweezer. 4.5in Curved tip high precision point tweezers allow for maximum visibility under magnification. Made from 400 Stainless Steel for added durability with mild corrosion resistance.

Excelta Ergo-Tweez Ergonomic Handling Tweezers. Three Star 4.5In 45[Degree] Curved Tip With High-Precision Point. Feature A Soft Foam Cushion Grip Specially Designed To Combat Operator Fatigue And Carpal Tunnel Syndrome. Grip Acts As A Heat Shield. Great For Die Attaching.

Tweezer With Curved 45[Degree] Tips. Two Star 4.5In For Various General-Purpose Uses In Micro-Electronic Assemblies And The Electronics Industry. Constructed Of Antimagnetic Stainless Steel. Length: 114.3Mm.

Tweezer With Curved 45[Degree] Tips. One Star 4.5In General-Purpose Tweezers For Handling Parts That Don'T Require Magnification Or A Fine Tip. Constructed Of Antimagnetic Stainless Steel. Length: 114.3Mm.

Curved Tip Fine Precision Tweezer. 4.5in Curved tip high precision point tweezers allow for maximum visibility under magnification. Made from 400 Stainless Steel for added durability with mild corrosion resistance.

Economy Curved Tip Tweezer. 4.5in Curved tip high precision point tweezers allow for maximum visibility under magnification. Made from 400 Stainless Steel for added durability with mild corrosion resistance.

Excelta Super Waf-O-Grip Wafer Handling Tweezer With Eight Teeth. Three Star 5In With Special Sharpened Blade For Easy Pick Up Of Silicon And Gallium Wafers. A Special Engaging Stop Prevents Chipping. Constructed Of Antimagnetic, Anti-Acid Neverust Stainless Steel.

Roll Pin Insertion Pliers. 6.5in Roll pin insertion pliers are designed to insert the card key roll pin, thus reducing production time.

Roll Pin Extraction Pliers. 6.5in Roll pin extraction pliers are designed to remove the card key roll pin, thus reducing production time.

Plier, Roll Pin Insertion-Extraction, EXCELTA®. Plier, Roll Pin Insertion-Extraction, Excelta - 900-100X, Five Star™ Plier

Stress Relief Forming Pliers with Shear Cutter. 5.75in Stress Relief Forming Pliers with Shear Cutter. Tool designed to form stress relief and cut lead to specific dimension in one easy step. Recommended for .020in diameter or smaller leads and wires.

Heavy-Duty Anti-Shock Shear Cutter. .5In Heavy-Duty Anti-Shock Shear Cutter. Shear Cutter Designed For Heavy-Duty Cutting Of Connector Pins And Large Component Leads. Tip Width .180In. Recommended Cutting Capacity 18 Awg (.040In Diameter). Standard Cut Length .040In.

Excelta Anti-Shock Shear Cutter. Five Star 6In Cuts Various Types Of Component Leads Or Wires To A Uniform Length, And Swages The End Of The Lead To Prevent It From Falling Out Of The Circuit Board. Standard Cut-Off Length Is 0.030. Tip Width: 0.160.

Large Anti-Shock Shear Cutter. 6in Large Anti-Shock Shear Cutter reduces shock on delicate solder connections and sensitive components. Tip width is .170in. Recommended cutting capacity 20 AWG (.032in diameter). Standard cutoff length is .040in but can be altered to customers preference.

Pliers, Terminal Plug Forming, Excelta - 907-101, Five Starâ„¢ Plier. Pliers, misc. former, 5 star quality, for terminal plugs

Through-Hole Power Transistor Forming Pliers. 5.5in Through-hole power transistor forming pliers are used in forming 3 leads on a TO-220 style transistor. The two outside leads are bent at 0.150in, while the center lead is bent at 0.250in from the body of the component.

Flat Pack Forming Pliers with Shear Cutter. 5.5in Flat Pack Forming Pliers with Shear Cutter. Heavy-duty tool will form a inGull Wingin and cut multiple leads to length on various types of flat packs. Recommended for .010in or smaller lead thickness.

6in Thin Jaw Anti-Shock Shear Cutter. Thinner jaw gives greater accessibility into high-density areas. Useful for cutting connector pins in confined areas. Tip width is .100in. Recommended cutting capacity 20 AWG (.032in diameter). Standard cutoff length is .030in.

Cutters, Standoff Shear, Large Frame, Excelta - 907-42A, Cutters, standoff shear large frame, 5 star quality, cuts multiple leads. Multi-Lead Stand-Off Shear Cutter

6in Carbon steel angulated shear cutter. The 45 degree angle of the cutting head helps increase visibility and reduces shock on delicate solder connections or components. Recommended cutting capacity is 18 AWG (.040in) soft wire. Standard cut length: .045in. ESD safe soft foam cushion grips.

Anti-Shock Shear Cutter and Bender. 6in Anti-Shock Shear Cutter and Bender cuts component leads at .060in then bends the lead keeping the component in place when soldering. Recommended cutting capacity 20 AWG (.032in diameter).

Forming Tools with Shear Cutter. 5.5in Forming Pliers with Shear Cutter designed to form a consistent stand off (.250in) and cut the lead to length (.125in) on most popular radial lead components. Recommended for .030in diameter or smaller leads and wires.

Pliers, Form Dog Leg, Excelta - 907-89, Five Star Quality Plier/Cutters. Pliers, cut and form dog leg, 5 star quality

I.C. Shear Cutter and Former. 5.25in Shear Cutter and Former. This tool will cut and form up to 8 I.C. leads. Leads are cut and form out or in for surface mounting of standard D.I.P./I.C.

Category