• 0
Shop Products $

Quantifoil R 1.2/1.3 200 Mesh, Copper. It Is A Perforated Support Foil With Pre-Defined Hole Size, Shape And Arrangement. It Has Advantages In Electron Microscopy (Em) Or Low-Energy Electron Point Source (Leeps) Microscopy When Compared With Convention

Quantifoil R1.2/1.3 300 Mesh, Copper. It Is A Perforated Support Foil With Pre-Defined Hole Size, Shape And Arrangement. It Has Advantages In Electron Microscopy (Em) Or Low-Energy Electron Point Source (Leeps) Microscopy When Compared With Convention

Well Plate Stand.

Model Iam-8 Multi Grids St.

Denka m3 lab-6 standard-hitachi.

6&9 PIPETTE & BULB HOLDER. Made from high impact plastic, hinged covered for cleanliness, neon-red color, ideal for protection of pipettes, Measures: 11.5(L) x 2.8(H) x 10.5(D)

Oval Hole 2x1mm, Cu.

Mount holder for 1/8pin.

Petri dish incubation tray.

Cell Phone cover. EShield Cover sterile for cell phone, Overall Size -9in x 14in, FDA approved, used within the sterile field in any healthcare environment including surgical suite and research labs Made of ultra-clear polyethylene film, meets ASTM 1671F Viral Penetration guidelines, CS25

BURETTE TIP HOLDER. Burette tip holder. For METTLER TOLEDO DV1000 series burettes.

Poxygrid, BASKET, 24-3/4X14X6. Epoxy-coated, steel wire baskets hold up under the most severe laboratory conditions. They will resist rust, corrosion, solvents, acids and alkalies. Handy for transporting and batch dipping glassware.

Poxygrid, BASKET, 11X6X3-1/2. Epoxy-coated, steel wire baskets hold up under the most severe laboratory conditions. They will resist rust, corrosion, solvents, acids and alkalies. Handy for transporting and batch dipping glassware.

CNT SS T316L W/CLPDWN CVR 20LT - CTHSMA-30-316L-J

S.S.CONTNR W/CLIP T316L 80LT - CTHSMA-47-316L-J

S.S.CONTNR W/CLIP T316L 100L - CTHSMA-47H-316L-J

Bottles, Stainless Steel, Eagle Stainless - STBEP-5-316L-A, STB series bottle with 1.0 IN. tri-clamp

CONT SS W/LID SANITRY T316L20L - ST30SMAT316L

S.S.CONTNR W/LID 80LT TYPE316L - STSMA-47-316L-J

S.S.CONTNR W/LID 100LTR SANIT - ST-47H-316L-J

Containers, CTH Series, Eagle Stainless - CTH-47-316L-J

CONT,STD,CVR+LK LEV,10L,T316L - CTL-24-316L-J

CONT STD LOCK LEVER 65L T316L - CTL-43-316L-J

Cover for Ingredient Beakers without Handles, Stainless Steel. For 4.3L beaker(13975-080).

Joint Clamp, Metal, for Standard Taper Joints. Fits Joint Sizes: 24/25, 24/40. Clamp is lacquer coated to avoid scratching glass. Joints are secure under moderate pressure to 200[degree]C. Suitable where higher temperatures are used or cracking occurs in the plastic equivalent.

Accessories for Distillation Shelf and Glassware Kit, Chemglass - CG-141-T-11, Quick Release Clamp, PTFE Coated, 60 mm

MORTAR, SS. Spare mortars are useful for grinding different types of samples on the same day. Handle not included. The mortar's tang fits into the removable handle available with the H37260 mortar set. Pestle not included.

Solution Basin. Capacity: 5qt. Stainless steel. Constructed with easy-to-clean, large rounded radius corners for easy pouring. No-spin recessed bottom for stability on flat surfaces. Dimensions: 30.5dia.x10.8Hcm.

Solution Basin. Capacity: 7qt. Stainless steel. Constructed with easy-to-clean, large rounded radius corners for easy pouring. No-spin recessed bottom for stability on flat surfaces. Dimensions: 34.6dia.x11.7Hcm.

Solution Basin. Capacity: 9.5qt. Stainless steel. Constructed with easy-to-clean, large rounded radius corners for easy pouring. No-spin recessed bottom for stability on flat surfaces. Dimensions: 36.8dia.x12.7Hcm.

Sponge Bowl. Capacity: 64oz. Stainless steel. Flat bottom and straight sides for extra stability. Dimensions: 19.2dia.x7.6Hcm.

Reaction Pie Plate Safety Holder Only. Keeps up to four pie wedges securely locked together on hotplate. Aluminum construction. Holder fits all 135mm diameter hot plate stirrers. Interchangeable wedges permit various sized vials on one hot plate. Green anodized.

Pie Wedge for 16ml Vial. Vial size: 21 x 70 mm, anodized color: red, hole depth: 32mm, holds 4 vials.

Stainless Steel Bucket. Autoclavable, multi-purpose 22-gauge stainless steel bucket. Long-lasting one-piece drawn construction with an extra-heavy bottom and smooth rim. Stainless steel wire handle. Capacity: 12.3L. Dimensions: 30x24cm.

Stainless Steel Bucket. Autoclavable, multi-purpose 22-gauge stainless steel bucket. Long-lasting one-piece drawn construction with an extra-heavy bottom and smooth rim. Stainless steel wire handle. Capacity: 15L. Dimensions: 30x26cm.

VWR Talon Double Buret Clamp. Research grade clamp holds two burets from micro to 100mL size. Scissors-like mechanism adjusts simply with a squeeze, yet grips firmly. Clamp unit attaches to a standard support rod with a built-in reinforced hook connector.

Hardware Fitting. Stainless steel MPT male. Size: 9.5x6.4mm.

Tee, Pressure Gauge. With fittings for 1/16 inch OD tubing

Scalpel Blades, Sterile. Stainless steel. Sterilized by gamma radiation. Individually sealed in foil peel packs. Blade: 15.

Scalpel Blades, Sterile. Stainless steel. Sterilized by gamma radiation. Individually sealed in foil peel packs. Blade: 20.

Scalpel Blades, Sterile. Stainless steel. Sterilized by gamma radiation. Individually sealed in foil peel packs. Blade: 22.

Super Erecta Shelf Divider. 20.3cm high. Snap-in-place. Stainless steel. Width: 61cm.

Super Erecta Ledge. Stackable side and back ledges. Prevent items from protruding or falling off shelves. Stainless steel. 2.5cm high. Width: 61cm.

Withdrawal Devices. For use with Thermo 10 Cryogenic Storage Vessels. Withdrawal device allows easy dispensing of up to 8L per minute without the need for pouring.

Withdrawal Devices. For use with Thermo 20 Cryogenic Storage Vessels. Withdrawal device allows easy dispensing of up to 8L per minute without the need for pouring.

Seeker/Probe. Stainless steel seeker/probe, with hexagonal handle and bent end. Length: 125mm.

ALUMINUM LOCKING RING - CG-1969-X-121

PROBE HOLDER 12MM GL-45 - CLS-1437-01

PROBE HOLDER12MM GL-45COMPSTYL - CLS-1437-02

PROBE HOLDER.5IN GL-45COMPSTYL - CLS-1437-03

TRAY KIT STACK 4 CLS-4021-1212 - CLS-4021-0001

TRAY KIT STACK 4 CLS-4021-1515 - CLS-4021-0003

TRAY KIT STACK 4 CLS-4021-2020 - CLS-4021-0005

TRAY ALUMINUM W/LINERS 12X12IN - CLS-4021-1212

TRAY ALUMINUM W/LINERS 15X15IN - CLS-4021-1515

TRAY ALUMINUM W/LINERS 20X20IN - CLS-4021-2020

TRAY ALUMINUM W/LINERS 20X30IN - CLS-4021-2030

TUBE HOLDER MICRO UNIVERSAL - CLS-4891-U16

Reaction Block. For 40mL scintillation vial size 28x98. Orange with 43mm hold depth. Holds 17 vials.

Stainless Steel Dressing Jar. 1.2L stainless steel dressing jar. Will not chip, break or corrode. OD: 10.4cm. Height: 12cm.

Stainless Steel Dressing Jar. 1.8L stainless steel dressing jar. Will not chip, break or corrode. 12 O.D.x16Hcm.

Stainless Steel Dressing Jar. 2.8L stainless steel dressing jar. Will not chip, break or corrode. 15 O.D.x17Hcm.

Stainless Steel Dressing Jar. 4.5L stainless steel dressing jar. Will not chip, break or corrode. 17 O.D.x19Hcm.

Balls for Physics Experiments - STBL19, Steel Ball, Drilled, Hardened, Ground and Polished, 19 mm

Balls for Physics Experiments - STBL25, Steel Ball, Drilled, Hardened, Ground and Polished, 25 mm

Balls for Physics Experiments - STBL25, Steel Ball, Drilled, 25 mm

AlniMAX IIâ„¢ Stainless Steel Multipole Magnets - CW-010-3PK, AlniMAX IIâ„¢ Stainless Steel Multipole Magnets

RECTANGULAR POWER CONTACT 516 SERIES - 59K0503

LIGHT PIPE VERTICAL 9.5MM CIRCULAR - 57J1718

CERAMIC DISC CAPACITOR 0.1UF 50V - 97K4396

TVS DIODE -30V 34V MLP 8PINS - 84W8886

TANTALUM CAPACITOR POLARIZED 25V - 57K9312

QUICK DISCONNECT TERMINAL 6.35X0.81MM - 72C7789

CERAMIC DISC CAPACITOR 1000PF 1KV - 80K9096

JUMPER BUSBAR 2 POSITION 9.53MM - 28F833

THROUGH HOLE RESISTOR 1KOHM 250MW - 38K0327

VWR C-Shaped Lead Ring, 450g. Vinyl-coated ring fits neatly around the neck of filtering flasks with side-arm tubing connections. Ring is flexible enough to be pulled apart to accommodate wider vessels. Fits 250-1000mL flasks. ID: 5.1cm.

VWRPitchd Blade Propeller 2Inch. Includes 4 Set Screws And Allen Key. 316L Electropolished Stainless Steel. Low Shear, High Top-To-Bottom Pumping Action With High Gas (Air) Injection. Axial Flow.

STAND, PP/PVC, ROTARY PIPETTE. This unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of the pipette you want.

Filter Cartridge. Replacement cartridge for Lubricated Rotary Vane Vacuum/Pressure Pumps (54907-059, -064; 54908-008, -012).

SPRING SS 32MM - TH032

Cover. For use with 4.73L anc 8.40L Instrument Trays, models 62687-069 and 62687-070.

Mayo Instrument Tray. Constructed of heavy-duty, 304 stainless steel. Finished to provide a tough, clean, corrosion-resistant surface for long-term use in a variety of applications. For excellent steam sterilization without moisture build-up. Dimensions: 34.8Lx25Wx1.9Hcm.

Solid Mayo Instrument Tray. Constructed of heavy-duty, 304 stainless steel. Finished to provide a tough, clean, corrosion-resistant surface for long-term use in a variety of applications. For excellent steam sterilization without moisture build-up. Dimensions: 15-1/8/Lx10-5/8Wx3/4Hcm.

Mayo Instrument Tray. Constructed of heavy-duty, 304 stainless steel. Finished to provide a tough, clean, corrosion-resistant surface for long-term use in a variety of applications. For excellent steam sterilization without moisture build-up. Dimensions: 43.2Lx29.5Wx1.9Hcm.

Closure Culture Flask. Indented,Stainless,13Mmid,Cs/144

Closure Culture Flask. Plain,Stainless,13Mmid,Cs/144

Closure Culture Flask. Indented,Stainless,16Mmid,Cs/144

Closure Culture Flask. Plain,Stainless,16Mmid,Cs/144

Closure Culture Flask. Indented,Stainless,18Mmid,Cs/144

Closure Culture Flask. Plain,Stainless,18Mmid,Cs/144

Closure Culture Flask. Indented,Stainless,20Mmid,Cs/144

Closure Culture Flask. Plain,Stainless,20Mmid,Cs/144

Category