• 0
Shop Products $

Circulator Adapter, Universal, Material: 304 stainless, 1in beaded pipe to 1in hose barb.

Circulator Adapter, Universal, Material: 304 stainless, 1.5in beaded pipe to 1in hose barb.

Circulator Adapter, Universal, Material: 304 stainless, 1in beaded pipe to M16x1 male elbow.

Circulator Adapter, Universal, Material: 304 stainless, 1in beaded pipe to M24x1.5 male elbow.

Circulator Adapter, Universal, Material: 304 stainless, 1in beaded pipe to M30x1.5 male elbow.

Circulator Adapter, Universal, Material: 304 stainless, 1in beaded pipe to 3/4in elbow hose barb.

Circulator Adapter, Universal, Material: 304 stainless, 1in beaded pipe to 1in elbow hose barb.

Circulator Adapter, Universal, Material: 304 stainless, 1.5in beaded pipe to M24x1.5 male elbow.

Safsite Reflux Valve, Allows Aspiration, Injection or Gravity Flow of Fluids, Luer Taper Operated, Normally Closed, RV1000NC, 0.12mL Priming Volume

Sublimation outer body 150 mm. Sublimation outer body, 150mm grooved Duran flange, 200mm height, 165mm OD, includes Viton o-ring, Improved sublimer for deep vacuum operation, with the vacuum valve on the top, Increased spacing between the cold finger and outer body leaves more room for the product

Inner cold finger lid 150 mm. Inner cold finger lid only, 150 mm grooved Duran flange, 114mm OD cold finger, 0-4mm Ptfe plug vacuum valve, Improved sublimer for deep vacuum operation, with vacuum valve on the top, Increased spacing between the cold finger and outer body leaves more room for product

Deep vacuum sublimation apparatus 150mm. Deep vacuum sublimation apparatus, 150mm grooved Duran flanges, Complete with outer body, inner cold finger lid and quick release clamp, Improved sublimer for deep vacuum operation, and spacing between cold finger and outer body leaves more room for product

Stir shaft glass 51 inch 28 mm. Stir shaft, Material: glass, Heavy duty, 51 inch length, 28 mm od for 100L low profile flask, for use with ACE 12845 reactors, pre-drilled to accommodate agitators, Recommended for use with either Trubore bearing with debris trap or non-shedding bearing

Adapter 304 stainless steel 1.5inch. Adapter, Materail: 304 stainless steel, 1.5 inch beaded pipe to 1 in elbow hose barb, universal pilot plant / circulator adapters and fittings designed for use with various manufacturers circulators and reaction systems

LDPE containment tray 33 liter. LDPE (Low density polyethylene) containment tray, fits under 12842 stand, available with and without drain spigot, Designed to place under a reactor or system to contain spill or leak, Temperature limit up to 77 deg C, Dimensions: 22 x 16 x 5.75in, Capacity: 33 litre

KIMBLE® SPE Disk Glassware and Manifolds, DWK Life Sciences - 971010-3047, Manifold, 33×100 mm

Vacuum take off adapter 24/40 outer top/inner bottom. Vacuum take off adapter, 24/40 outer top, 24/40 inner bottom, inside the bend no 11 Ace-Thred, with a 105 degree sweep to facilitate a more vertical relationship with the receiving glassware. Drip stem

Stopcock adapter, straight hose connection, PTFE plug, 45/50.

Sublimation outer body 60mm flange. Sublimation outer body only, 60mm grooved Duran flange, 150mm height, 70mm OD, includes Viton o-ring, quick release clamp, for deep vacuum operation with the vacuum valve on top of sublimer to keep sublimate around the

Inner cold finger lid only, 60mm flange. Inner cold finger lid only, for sublimer, 60mm grooved Duran flange, 45mm OD cold finger, 0-4mm Ptfe plug vacuum valve, for deep vacuum operation with the vacuum valve on top of sublimer to keep sublimate around th

Deep vacuum sublimation apparatus 60mm flange. Deep vacuum sublimation apparatus, 60mm grooved Duran flange, 200mL capacity under finger, Complete with outer body, inner cold finger lid & quick release clamp, with vacuum valve on top of sublimer to keep a

Adapter assortment, set one, standard taper, enlarging and reducing.

Adapter assortment, set two, standard taper, reducing.

Adapter assortment, set three, NO.7 Ace-Thred and trade, probe to standard taper adapter.

Replacement parts, Adapter, Set Three (5701-03).

Replacement parts, Adapter, Set Four (5701-04).

Adapter Closed End. Luer Adapter, Fill to Female Luer lock Closed End, Style: 316 Stainless Steel, Meets ISO 594 specifications, Final assembly water tested at 45 PSI

Adapter 1/16Inch To 3/32Inch. Luer Adapter 1/16in-3/32in Luer Adapter, Fill to Female Luer lock Hose End for Inner Diameter Tubing, Style: 316 Stainless Steel, Concentric Hose End, Meets ISO 594 specifications, Final assembly water tested at 45 PSI, Size:

Adapter 1/8Inch To 3/16In. Luer Adapter, Male Luer lock to Hose End, For 1/8Inch To 3/16Inch Inner Diameter Tubing, Style: Plated Brass, Meets ISO 594 specifications, Final assembly water tested at 45 PSI, Size: 1/8Inch To 3/16In

Adapter Plated Brass. Luer Adapter, Male Luer lock To Tuohy Borst (1-5 French), Style: Plated Brass, Meets ISO 594 specifications, Final assembly water tested at 45 PSI

Adapter 1/16Inch To 3/32Inch. Luer Adapter 1/16In- 3/32In Luer Adapter, Fill to Female Luer lock Hose End, For Inner Diameter Tubing, Style: Plated Brass, Concentric Hose End, Meets ISO 594 specifications, Final assembly water tested at 45 PSI, Size: 1/16

Adapter Hose end. Adapter, Female Luer To 1/4In, Hose End for 1/4in to 5/16in Inner Diameter Tubing, Meets ISO 594 specifications, Final assembly water tested at 45 PSI

Adapter 1/8Inch To 3/16Inch. Luer Adapter, Hose End for 1/8inch to 3/16inch Inner Diameter Tubing,MM to Female Luer lock, Style: Plated Brass, Meets ISO 594 specifications, Final assembly water tested at 45 PSI, Size: 1/8Inch To 3/16Inch

Adapter Closed End. Luer Adapter, Closed end, MM to Female Luer lock, Style: Plated Brass, Meets ISO 594 specifications, Final assembly water tested at 45 PSI

Adapter 1/16Inch To 3/32Inch. Luer Adapter, for Inner Diameter Tubing,MM to Female Luer lock, Style: 316 Stainless Steel, Meets ISO 594 specifications, Final assembly water tested at 45 PSI, SIZE: 1/16Inch To 3/32Inch

Adapter 1/8Inch To 3/16Inch. Luer Adapter, Hose End for 1/8inch to 3/16inch Inner Diameter Tubing,MM to Female Luer lock, Style: 316 Stainless Steel, Meets ISO 594 specifications, Final assembly water tested at 45 PSI, Size: 1/8Inch To 3/16Inch

Adapter 316 Stainless. Luer Threaded-End NPT Adapter, Style: 316 Stainless, 1/8IN Female NPT, Meets ISO 594 specifications, Final assembly water tested at 45 PSI

Adapter 316 Stainless. Luer Threaded-End UTS Adapter, Style:316 Stainless, 10-32 Feamale Luer locke, Threaded, Meets ISO 594 specifications, Final assembly water tested at 45 PSI

Adapter 1/8Inch To 3/16Inch. Luer Adapter, Hose End for 1/8inch to 3/16inch Inner Diameter Tubing, MM to Female Luer lock, Style: 316 Stainless Steel, Meets ISO 594 specifications, Final assembly water tested at 45 PSI, Size: 1/8Inch To 3/16Inch

Adapter Fill to Male Luer lock. Luer Adapter, Fill to Male Luer lock, Style: Plated Brass, Meets ISO 594 specifications, Final assembly water tested at 45 PSI

Adapter Female Luer To Luer Catheter Tip, small Tubing, Meets ISO 594 specifications, Final assembly water tested at 45 PSI

Adapter Plated Brass. Luer Threaded-End UTS Adapter, Style: Plated Brass, 1/4IN-28 Female, Standard threaded, Meets ISO 594 specifications, Final assembly water tested at 45 PSI

Vacuum Adapter Straight 24/40Joint 3/8In. Vacuum Adapter, Straight, 24/40 Joint, has a top outer joint and bottom inner joint, with 3/8in hose connector

Adapter 3-Way 24/40 Joint 75 Deg Angle. Adapter, 3-Way, 24/40 Joint, has a 75 deg angle sidearm with inner joints on the sidearm and bottom and an outer joint on the top

Adapter Inclined 105 Degree 24/40 Joint. Adapter, Inclined, 105 deg, 24/40 Joint, with outer joints on the sidearm and top and an inner joint on the bottom

Vacuum Adapter Bent 24/40 Joint 105 Deg. Vacuum Adapter, Bent, 24/40 Joint, has a 105 deg angle between the top outer joint and bottom inner joint, with 3/8in hose connector

Adapter, Number 7 Ace-Thred To 1/4 In Od Precision Ground Tube End.

Adapter Number 11 Ace-Thred To 5/16In Od. Adapter, Number 11 Ace-Thred To 5/16 In Od Precision Ground Tube End

Adapter, Number 11 Ace-Thred To 3/8 In Od Precision Ground Tube End.

Adapter, Number 11 Ace-Thred To 1/2 In Od Precision Ground Tube End.

Adapter, Number 15 Ace-Thred To 3/8 In Od Precision Ground Tube End.

Adapter, Number 15 Ace-Thred To 1/2 In Od Precision Ground Tube End.

Adapter, Number 15 Ace-Thred To 5/8 In Od Precision Ground Tube End.

Adapter, Number 25 Ace-Thred To 3/4 In Od Precision Ground Tube End.

Adapter, Number 25 Ace-Thred To 1 In Od Precision Ground Tube End.

Probe Adapter 2.5in, 316 l stainless steel probe adapter threaded. Dimensions: 5 x 8 in.

Adapter Probe 3.25 316L SS 5 x 8 In 316 l stainless steel probe adapter threaded.

Tube Curved Harvesting SS 5L 1/4X14In. Stainless steel curved harvesting tube for 5l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. Size: 5l Dimensions: 1/4in x 5/32 x 14 1/4in

Tube Curved Harvesting SS 8L 1/4X20In. Stainless steel curved harvesting tube for 8l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. Size: 8l Dimensions: 1/4in x 5/32 x 20in

Tube Curved Harvesting SS 15L 1/4X 22In. Stainless steel curved harvesting tube for 15l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. Size: 15l Dimensions: 1/4in x 5/32 x 22in

Tube Curved Harvesting SS 36L 1/4X 24In. Stainless steel curved harvesting tube for 36l round bottom omni vessels. Manufactured from 316l stainless steel with ra finish of 32 micro inch or better inside and out electropolish finish. Size: 36l Dimensions: 1/4in x 5/32 x 24in

ADAPTER VACUUM 24/25 OUTER-24/25 INNER - CG-1049-M-24

ADAPTER VACUUM 24/25 OUTER-45/50 INNER - CG-1049-M-45

PUMP DIAPHRAGM LIQUID METER 115V 6L/MIN - CG-1171-50

ADAPTER DISTILLING 24/40 STYLE B 14MM - CG-1235-V-30

Accessories for Rockers, Waving Rotars, Microplate Shaker, Mini Rotator, Digital, Thermo Scientific - 88870129, General power adaptor with UK plug

ADAPTER NO 7 ACE-THRED 14/20 INNER - 5028-226, #7 Ace-Thred

ADAPTER NO 7 ACE-THRED 24/40 INNER - 5028-230, #7 Ace-Thred

ADAPTER NO 7 ACE-THRED 34/45 INNER - 5028-234, #7 Ace-Thred

MULTI-ADAPTER LUER-LOCK IST PK100 - 14.1205.100

PUMP, OIL DIFFUSION, WITH BYPASS, AIRFREE. Diffusion Pump, Left Handed. Single stage oil diffusion pump useful with manifolds such as AF-0450 through AF-0454. Will provide vacuum of 1.0 millitorr, at a pumping rate of approx. 8 liters per second.

ADAPTER, BUSHING, FLUOROPOLYMER RESIN. Lower Inner Joint: 24/40; Top Outer Joint: 19/38. Similar to CG-1016, but made entirely of fluoropolymer resin.

ADAPTER, BUSHING, FLUOROPOLYMER RESIN. Lower Inner Joint: 29/42; Top Outer Joint: 24/40. Similar to CG-1016, but made entirely of fluoropolymer resin.

ADAPTER, BUSHING, FLUOROPOLYMER RESIN. Lower Inner Joint: 45/50; Top Outer Joint: 24/40. Similar to CG-1016, but made entirely of fluoropolymer resin.

ADAPTER, BUSHING, FLUOROPOLYMER RESIN. Lower Inner Joint: 45/50; Top Outer Joint: 29/42. Similar to CG-1016, but made entirely of fluoropolymer resin.

ADAPTER, DISTILLATION, 75[degree]. Rubber Fittings, Adapter has a tubulation at the top for use with a CG-1040 rubber fitting. Fitting permits insertion of plain stem, partial immersion thermometers. Supplied complete with one CG-1040 rubber fitting.

ADAPTER, FLUOROPOLYMER RESIN, UNIVERSAL, INLET. COMPLETE ADAPTERS. Joint size: 10/18. Unique adapter is made entirely of fluoropolymer resin and is supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.

ADAPTER, FLUOROPOLYMER RESIN, UNIVERSAL, INLET. COMPLETE ADAPTERS. Joint size: 14/20. Unique adapter is made entirely of fluoropolymer resin and is supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.

ADAPTER, FLUOROPOLYMER RESIN, UNIVERSAL, INLET. COMPLETE ADAPTERS. Joint size: 24/40. Unique adapter is made entirely of fluoropolymer resin and is supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.

ADAPTER, FLUOROPOLYMER RESIN, UNIVERSAL, INLET. COMPLETE ADAPTERS. Joint size: 29/42. Unique adapter is made entirely of fluoropolymer resin and is supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.

ADAPTER, FLUOROPOLYMER RESIN, UNIVERSAL, INLET. REPLACEMENT FLUOROPOLYMER RESIN CONES. Accepts I.D; 3.5mm; Color: White. Made entirely of fluoropolymer resin. Supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.

ADAPTER, FLUOROPOLYMER RESIN, UNIVERSAL, INLET. REPLACEMENT FLUOROPOLYMER RESIN CONES. Accepts I.D; 5.0mm; Color: Red. Made entirely of fluoropolymer resin. Supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.

ADAPTER, FLUOROPOLYMER RESIN, UNIVERSAL, INLET. REPLACEMENT FLUOROPOLYMER RESIN CONES. Accepts I.D; 5.5mm; Color: Brown. Made entirely of fluoropolymer resin. Supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.

ADAPTER, FLUOROPOLYMER RESIN, UNIVERSAL, INLET. REPLACEMENT FLUOROPOLYMER RESIN CONES. Accepts I.D; 6.0mm; Color: Gray. Made entirely of fluoropolymer resin. Supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.

ADAPTER, FLUOROPOLYMER RESIN, UNIVERSAL, INLET. REPLACEMENT FLUOROPOLYMER RESIN CONES. Accepts I.D; 6.5mm; Color: Purple. Made entirely of fluoropolymer resin. Supplied complete with a series of 5 all fluoropolymer resin ferrule style cones. These cones have inside diameters that run from 3.5 to 6.

ADAPTER, FLUOROPOLYMER RESIN, UNIVERSAL, INLET. REPLACEMENT FLUOROPOLYMER RESIN CONES. Set of one each of above listed cones. Made entirely of fluoropolymer resin. Supplied complete with series of 5 all fluoropolymer resin ferrule style cones with inside diameters that run from 3.5 to 6.

ADAPTER, FLUOROPOLYMER RESIN, THERMOMETER, INLET. Joint size: 24/25. For use with Joint Sizes: 24/25-24/40. Made entirely of fluoropolymer resin, adaptor has inner joint of listed size. Compression nut allows for vertical adjustment of thermometers or bleed tubes having O.D. between 6 and 7mm.

ADAPTER, FLUOROPOLYMER RESIN, THERMOMETER, INLET. Joint size: 29/26. For use with Joint Sizes: 29/26-29-42. Made entirely of fluoropolymer resin, adaptor has inner joint of listed size. Compression nut allows for vertical adjustment of thermometers or bleed tubes having O.D. between 6 and 7mm.

ADAPTER, FLUOROPOLYMER RESIN, THERMOMETER, INLET. Joint size: 10/18. For Use with Joint Sizes: 10/18-10/30. Made entirely of fluoropolymer resin, adaptor has inner joint of listed size. Compression nut allows for vertical adjustment of thermometers or bleed tubes having O.D. between 6 and 7mm.

ADAPTER, FLUOROPOLYMER RESIN, THERMOMETER, INLET. Joint size: 14/20. For use with Joint Sizes: 14/20-14/35. Made entirely of fluoropolymer resin, adaptor has inner joint of listed size. Compression nut allows for vertical adjustment of thermometers or bleed tubes having O.D. between 6 and 7mm.

ADAPTER, FLUOROPOLYMER RESIN, THERMOMETER, INLET. Joint size: 19/22. For use with Joint Sizes: 19/22-19/38. Made entirely of fluoropolymer resin, adaptor has inner joint of listed size. Compression nut allows for vertical adjustment of thermometers or bleed tubes having O.D. between 6 and 7mm.

FILTER ADAPTER, NEOPRENE. Size 5. Height: 35mm. I.D. Top/Bottom: 50x30mm. O.D. Top/Bottom: 58x38mm. Wall Thickness: 4.0. Neoprene filter adapters are designed to fit between the filtering funnel and flask. For use with Buchner funnels, Grooch crucibles, filter tubes etc.

ADAPTER, CLAISEN, MINUM-WARE. Useful for addition of reagents to moisture sensitive reactions. Lower inner and top outer threaded joints all are 14/10 size. Supplied complete with two open-top screw caps (MW-102-33), fluoropolymer resin faced septa (MW-104-33) and Viton o-rings (MW-100-08).

ADAPTER, CONNECTING, MINUM-WARE. Used as a component in vacuum distillations. Lower inner and top outer threaded joint, sidearm has a drip tip, all are 14/10. Supplied complete with open-top screw cap (MW-102-33), fluoropolymer resin faced septa (MW-104-33) and Viton O-ring (MW-100-08).

ADAPTER, FLOW CONTROL, MINUM-WARE. Used to regulate the input of liquids or gases into reactions. Stopcock is fluoropolymer resin with a bore of 1mm. Inner joint is a 14/10.

ADAPTER, INLET, MINUM-WARE. Used with thermometers, bleed tubes, etc. with outside diameters from 5-7mm. A vacuum tight seal is made using the supplied Viton O-ring and nylon compression cap while allowing the vertical adjustment of the thermometer or bleed tube.

ADAPTER, INLET, VACUUM, MINUM-WARE. Adapter has a 14/10 inner joint and #7 Chem-Thread to permit insertion of 5-7mm O.D. thermometers, bleed tubes etc; and a side hose connection. Supplied complete with compression cap (CG-352-01) and Viton O-ring (CG-305-07).

ADAPTER, VACUUM DISTILLATION, 105[degree] MINUM-WARE. Used in microscale vacuum distillations. Adapter has a top threaded outer joint and a lower inner joint with sealed in drip tip, all are 14/10. Side hose connection has an O.D. of 9mm at the middle serration.

ADAPTERS, 15MM O-RING JOINT, AIRFREE. Style 'A'. From #15 O-ring Joint to: 1/4in. straight glass tubing. Adapters for use with AF-0060 and AF-0061 manifolds that permit the manifold to be utilized with a multitude of standard glassware or tubing products.

Category