• 0
Shop Products $

ADAPTER, SYRINGE ADDITION. H: 105mm. Joint size: 24/40. Adapter is inserted between the flask and condenser in a distillation set up and is used for additions to reactions with a syringe pump without having to bend the needle or cannula. Supplied complete with one each CG-3022-05 rubber septa.

ADAPTER, SYRINGE ADDITION. H: 72mm. Joint size: 14/20. Adapter is inserted between the flask and condenser in a distillation set up and is used for additions to reactions with a syringe pump without having to bend the needle or cannula. Supplied complete with one each CG-3022-05 rubber septa.

ADAPTER, THERMOMETER, INLET. H: 80mm. Joint size: 24/40. Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7mm. Supplied complete with a Celcon compression cap and Viton o-ring.

ADAPTER, THERMOMETER, INLET. H: 85mm. Joint size: 29/42. Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7mm. Supplied complete with a Celcon compression cap and Viton o-ring.

ADAPTER, THERMOMETER, INLET. H: 65mm. Joint size: 19/22. Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7mm. Supplied complete with a Celcon compression cap and Viton o-ring.

ADAPTER, UNIVERSAL, INLET. Joint size: 14/20. Chem-Thread Size: #9; Accepts O.D; 7-9mm; O-Ring Size: 110. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, UNIVERSAL, INLET. Joint size: 24/40. Chem-Thread Size: #9; Accepts O.D; 7-9mm; O-Ring Size: 110. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, UNIVERSAL, INLET. Joint size: 24/40. Chem-Thread Size: #12; Accepts O.D; 9-12mm; O-Ring Size: 204. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, UNIVERSAL, INLET. Joint size: 24/40. Chem-Thread Size: #15; Accepts O.D; 12-15mm; O-Ring Size: 206. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, UNIVERSAL, INLET. Joint size: 29/42. Chem-Thread Size: #9; Accepts O.D; 7-9mm; O-Ring Size: 110. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, UNIVERSAL, INLET. Joint size: 29/42. Chem-Thread Size: #12; Accepts O.D; 9-12mm; O-Ring Size: 204. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, UNIVERSAL, INLET. Joint size: 29/42. Chem-Thread Size: #15; Accepts O.D; 12-15mm; O-Ring Size: 206. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, UNIVERSAL, INLET. Joint size: 29/42. Chem-Thread Size: #18; Accepts O.D; 14-18mm; O-Ring Size: 208. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, THERMOMETER, INLET, 10[degree] OFFSET. H: 80mm. Joint size: 24/40. Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7mm.

ADAPTER, THERMOMETER, INLET, 10[degree] OFFSET. H: 85mm. Joint size: 29/42. Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7mm.

ADAPTER, THERMOMETER, INLET, 10[degree] OFFSET. H: 70mm. Joint size: 29/26. Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers or any other tube having an O.D. between 4 and 7mm.

ADAPTER, UNIVERSAL, INLET, WITH HOSE CONNECTION. Joint size: 14/20. Chem-Thread Size: #9; Accepts O.D; 7-9mm; O-Ring Size: 110. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, UNIVERSAL, INLET, WITH HOSE CONNECTION. Joint size: 24/40. Chem-Thread Size: #9; Accepts O.D; 7-9mm; O-Ring Size: 110. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, UNIVERSAL, INLET, WITH HOSE CONNECTION. Joint size: 24/40. Chem-Thread Size: #12; Accepts O.D; 9-12mm; O-Ring Size: 204. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, UNIVERSAL, INLET, WITH HOSE CONNECTION. Joint size: 24/40. Chem-Thread Size: #15; Accepts O.D; 12-15mm; O-Ring Size: 206. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

ADAPTER, INLET, WITH HOSE CONNECTION. H: 80mm. Joint size: 24/40. With a serrated hose connection for vacuum or for the introduction of gases. The #7 Chem-Thread at the top is for a vacuum tight seal of plain stem thermometers or any other tube having an O.D. of betwen 4 and 7mm.

ADAPTER, INLET, WITH HOSE CONNECTION. H: 85mm. Joint size: 29/42. With a serrated hose connection for vacuum or for the introduction of gases. The #7 Chem-Thread at the top is for a vacuum tight seal of plain stem thermometers or any other tube having an O.D. of betwen 4 and 7mm.

ADAPTER, INLET, WITH HOSE CONNECTION. H: 50mm. Joint size: 14/20. With a serrated hose connection for vacuum or for the introduction of gases. The #7 Chem-Thread at the top is for a vacuum tight seal of plain stem thermometers or any other tube having an O.D. of betwen 4 and 7mm.

ADAPTER, VACUUM TAKE-OFF, VERTICAL. HxW: 170x50mm. Joint size: 24/40. With standard taper top outer and lower inner joints with sealed in drip tip. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.

ADAPTER, VACUUM TAKE-OFF, VERTICAL. HxW: 170x55mm. Joint size: 29/42. With standard taper top outer and lower inner joints with sealed in drip tip. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.

ADAPTER, VACUUM TAKE-OFF, VERTICAL. HxW: 105x50mm. Joint size: 14/20. With standard taper top outer and lower inner joints with sealed in drip tip. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.

ADAPTER, VACUUM TAKE-OFF, VERTICAL. HxW: 105x50mm. Joint size: 19/22. With standard taper top outer and lower inner joints with sealed in drip tip. Serrated hose connection has an O.D. of 10mm at the largest serration for connection to vacuum source.

ADAPTER, VACUUM TAKE-OFF, LONG STEM. HxW: 370x50mm. Joint size: 24/40. With standard taper top outer and lower inner joints with sealed in lower tube extending below inner joint. Tubing extends 100mm below the joint on the 14/20 and 19/22 sizes and 200mm on the 24/40, 29/26 and 29/42 sizes.

ADAPTER, VACUUM TAKE-OFF, LONG STEM. HxW: 370x55mm. Joint size: 29/42. With standard taper top outer and lower inner joints with sealed in lower tube extending below inner joint. Tubing extends 100mm below the joint on the 14/20 and 19/22 sizes and 200mm on the 24/40, 29/26 and 29/42 sizes.

ADAPTER, VACUUM TAKE-OFF, LONG STEM. HxW: 210x50mm. Joint size: 14/20. With standard taper top outer and lower inner joints with sealed in lower tube extending below inner joint. Tubing extends 100mm below the joint on the 14/20 and 19/22 sizes and 200mm on the 24/40, 29/26 and 29/42 sizes.

ADAPTER, VACUUM TAKE-OFF, 105[degree]. HxW: 170x125mm. Joint size: 29/42. With standard taper top outer and lower inner joints with sealed in drip tip. Adapter is bent at a 105[degree] angle for use in vacuum distillation. Serrated hose connection has an O.D.

ADAPTER, VACUUM TAKE-OFF, 105[degree]. HxW: 105x90mm. Joint size: 14/20. With standard taper top outer and lower inner joints with sealed in drip tip. Adapter is bent at a 105[degree] angle for use in vacuum distillation. Serrated hose connection has an O.D.

ADAPTER, VACUUM TAKE-OFF, 105[degree]. HxW: 110x90mm. Joint size: 19/22. With standard taper top outer and lower inner joints with sealed in drip tip. Adapter is bent at a 105[degree] angle for use in vacuum distillation. Serrated hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Joint size: lower: 24/25. Pluro-Stopper Size: #3; Fits Funnel Capacity: 15 to 150ml. Adapters are used for reduced pressure filtration using plain stem buchner funnels. Top is tooled to accept the listed size of pluro-stopper. Serrated hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Joint size: lower: 29/26. Pluro-Stopper Size: #3; Fits Funnel Capacity: 15 to 150ml. Adapters are used for reduced pressure filtration using plain stem buchner funnels. Top is tooled to accept the listed size of pluro-stopper. Serrated hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Joint size: lower: 24/40. Pluro-Stopper Size: #5 or 6; Fits Funnel Capacity: 350 to 3000ml. Adapters are used for reduced pressure filtration using plain stem buchner funnels. Top is tooled to accept the listed size of pluro-stopper. Serrated hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Joint size: lower: 29/42. Pluro-Stopper Size: #5 or 6; Fits Funnel Capacity: 350 to 3000ml. Adapters are used for reduced pressure filtration using plain stem buchner funnels. Top is tooled to accept the listed size of pluro-stopper. Serrated hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Joint size: lower: 14/20. Pluro-Stopper Size: #1; Fits Funnel Capacity: 2 to 30ml. Adapters are used for reduced pressure filtration using plain stem buchner funnels. Top is tooled to accept the listed size of pluro-stopper. Serrated hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Overall Height: 110mm. Joint size: 14/20. Flange I.D; 23mm; Pluro Stopper: #2. Adapter used for reduced pressure filtration with plain stem buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Overall Height: 110mm. Joint size: 19/22. Flange I.D; 23mm; Pluro Stopper: #2. Adapter used for reduced pressure filtration with plain stem buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Overall Height: 220mm. Joint size: 24/40. Flange I.D; 31mm; Pluro Stopper: #3. Adapter used for reduced pressure filtration with plain stem buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Overall Height: 230mm. Joint size: 24/40. Flange I.D; 38mm; Pluro Stopper: #4. Adapter used for reduced pressure filtration with plain stem buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Overall Height: 220mm. Joint size: 29/42. Flange I.D; 31mm; Pluro Stopper: #3. Adapter used for reduced pressure filtration with plain stem buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D.

ADAPTER, VACUUM FILTRATION. Overall Height: 230mm. Joint size: 29/42. Flange I.D; 38mm; Pluro Stopper: #4. Adapter used for reduced pressure filtration with plain stem buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D.

ADAPTER, THERMOMETER, 10[degree] OFFSET. H: 108mm. Joint size: 24/40. Adapter has a 10/30 outer joint at the top for use with CG-3506 thermometers. When used with vertical side neck flasks, thermometers can be angled into the bottom of the flask.

ADAPTER, TRANSFER. HxW: 95x65mm. Joint size: 29/42. Used in the transfer of fluids from vessels having standard taper joints.

ADAPTER, GAS INLET, HOSE CONNECTION. HxW: 65x60mm. Joint size: 24/40. Gas inlet adapter with a tube extending 200mm below the inner joint. Permits gas to be introduced at the bottom of larger reaction vessels or flasks. With serrated hose connection having an O.D. of 10mm at the largest serration.

ADAPTER, INLET, STRAIGHT, HOSE CONNECTION. HxW: 165x50mm. Joint size: 24/40. With serrated hose connection having an O.D. of 10mm at the largest serration sealed between the top outer and lower inner standard taper joints.

ADAPTER, INLET, STRAIGHT, HOSE CONNECTION. HxW: 105x45mm. Joint size: 14/20. With serrated hose connection having an O.D. of 10mm at the largest serration sealed between the top outer and lower inner standard taper joints.

ADAPTER, INERT GAS, INNER JOINT. HxW: 72x80mm. Joint size: 24/40. Adapter has two hose connections 180[degree] from one another to permit a flow of inert gas over the apparatus. Hose connection has an O.D. of 10mm at the largest serration.

ADAPTER, INERT GAS, INNER JOINT. HxW: 72x80mm. Joint size: 29/42. Adapter has two hose connections 180[degree] from one another to permit a flow of inert gas over the apparatus. Hose connection has an O.D. of 10mm at the largest serration.

ADAPTER, INERT GAS, INNER JOINT. HxW: 48x60mm. Joint size: 14/20. Adapter has two hose connections 180[degree] from one another to permit a flow of inert gas over the apparatus. Hose connection has an O.D. of 10mm at the largest serration.

ADAPTER, INERT GAS, INNER JOINT. HxW: 48x60mm. Joint size: 19/22. Adapter has two hose connections 180[degree] from one another to permit a flow of inert gas over the apparatus. Hose connection has an O.D. of 10mm at the largest serration.

ADAPTER, DISTILLATION, 105[degree]. HxW: 141x105mm. Joint size: 24/40. With a top outer standard taper joint. Tapered delivery tube is bent at a 105'angle to the outer joint and extends into open receivers.

ADAPTER, DISTILLATION, 105[degree]. HxW: 90x55mm. Joint size: 14/20. With a top outer standard taper joint. Tapered delivery tube is bent at a 105'angle to the outer joint and extends into open receivers.

ADAPTER, DISTILLATION, 105[degree]. HxW: 90x60mm. Joint size: 19/22. With a top outer standard taper joint. Tapered delivery tube is bent at a 105'angle to the outer joint and extends into open receivers.

ADAPTER, DISTILLATION, 105[degree]. HxW: 135x90mm. Joint size: 24/40. With top outer and lower inner joints both being the same size.

ADAPTER, DISTILLATION, 105[degree]. HxW: 150x100mm. Joint size: 29/42. With top outer and lower inner joints both being the same size.

ADAPTER, DISTILLATION, 105[degree]. HxW: 100x60mm. Joint size: 14/20. With top outer and lower inner joints both being the same size.

ADAPTER, DISTILLATION, 105[degree]. HxW: 105x60mm. Joint size: 14/20. With sealed in lower drip tip and top outer joints, both being the same size.

ADAPTER, DISTILLATION, 105[degree]. HxW: 114x64mm. Joint size: 19/22. With sealed in lower drip tip and top outer joints, both being the same size.

ADAPTER, DISTILLATION. Joint size: 24/40. Distance Between Inner Joints: 200mm. With two standard taper inner joints, parallel, and at a 75[degree] angle to the connecting tube.

ADAPTER, DISTILLATION. Joint size: 14/20. Distance Between Inner Joints: 100mm. With two standard taper inner joints, parallel, and at a 75[degree] angle to the connecting tube.

ADAPTER, DISTILLATION. Joint size: 14/20. Distance Between Inner Joints: 100mm. With two standard taper inner joints, parallel, and at a 75[degree] angle to the connecting tube. Adapter has a sealed in drip tip and serrated hose connection for vacuum source.

ADAPTER, CLAISEN, MODIFIED. HxW: 165x150mm. Joint size: 24/40. Claisen style adapter with an additional standard taper outer joint at a 45[degree] angle to the vertical outer joint.

ADAPTER, CLAISEN, MODIFIED. HxW: 170x155mm. Joint size: 29/42. Claisen style adapter with an additional standard taper outer joint at a 45[degree] angle to the vertical outer joint.

ADAPTER, CLAISEN, MODIFIED. HxW: 117x105mm. Joint size: 14/20. Claisen style adapter with an additional standard taper outer joint at a 45[degree] angle to the vertical outer joint.

ADAPTER, DISTILLATION, JACKETED. HxW: 205x210mm. Joint size: 24/40. Adapter is vacuum jacketed and can be used as a distilling head to connect a condenser with the top of the distillation column. The 10/30 top outer joint is for use with CG-3506, 75mm immersion thermometers.

ADAPTER, DISTILLING. Joint size: 24/40. Thermometer Size/Immersion: 10/30-75mm; Distance Between Inner Joints: 180. Adapter is used to connect distilling column with vertical condensers. With standard taper outer joint at the top for use with 10/18 or 10/30 jointed thermometers.

ADAPTER, INLET, BLEED TUBE. For the introduction of gases or liquids during reactions. Bleed tube has an O.D. of 7mm with a tapered delivery end and capillary tip. Overall length is 280mm.

FLOW CONTROL ADAPTER, STANDARD TAPER JOINT. Joint size: 24/40. Flow control adapter for use with CG-1188 and CG-1189 chromatography columns along with CG-1190 reservoirs. Adapter has a 0-4mm Chem-Cap metering plug.

FLOW CONTROL ADAPTER, STANDARD TAPER JOINT. Joint size: 45/50. Flow control adapter for use with CG-1188 and CG-1189 chromatography columns along with CG-1190 reservoirs. Adapter has a 0-4mm Chem-Cap metering plug.

FLOW CONTROL ADAPTER, CHROMATOGRAPHY, RODAVISS JOINT. Joint size: 24/40. Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs. Adapter has a 0-4mm Chem-Cap metering plug.

FLOW CONTROL ADAPTER, CHROMATOGRAPHY, RODAVISS JOINT. Joint size: 45/50. Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs. Adapter has a 0-4mm Chem-Cap metering plug.

FLOW CONTROL ADAPTER, SPHERICAL JOINT. Joint size: 35/20. Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap metering plug.

FLOW CONTROL ADAPTER, SPHERICAL JOINT. Joint size: 50/30. Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap metering plug.

FLOW CONTROL ADAPTER, SPHERICAL JOINT. Joint size: 75/50. Flow control adapter for use with CG-1198 and CG-1199 chromatography columns along with CG-1200 reservoir. Adapter has a 0-4mm Chem-Cap metering plug.

SUBLIMATION ADAPTER. Complete Adapter. Joint size: 24/25. Adapter permits sublimation directly in any reaction vessel having an standard taper outer joint; simply remove condenser or other apparatus from joint, insert adapter and begin.

SUBLIMATION ADAPTER. Replacement Components. 24/25 Vacuum Adapter Only. Adapter permits sublimation directly in any reaction vessel having an standard taper outer joint; simply remove condenser or other apparatus from joint, insert adapter and begin.

SUBLIMATION ADAPTER. Replacement Components. Cold Finger Condenser Only. Adapter permits sublimation directly in any reaction vessel having an standard taper outer joint; simply remove condenser or other apparatus from joint, insert adapter and begin.

HOSE CONNECTION DIRECT MICRO - CG-302-01

ADAPTER, DISTILLATION, CLAISEN, MODIFIED. #7 Compression Cap. Adapter has a #7 Chem-Thread at the top of the side tube for a vacuum tight seal of plain stem thermometers.

ADAPTER, UNIVERSAL, INLET. Replacement Components. #9 Compression Cap. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters. Will accept glass, metal or heavy wall plastic tubes having diameters between 7 to 18mm O.D.

ADAPTER, UNIVERSAL, INLET. Replacement Components. #15 Compression Cap. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters. Will accept glass, metal or heavy wall plastic tubes having diameters between 7 to 18mm O.D.

CHEM-THREAD, CELCON COMPRESSION CAP WITH APERTURE. Size: 25. Celcon compression cap with listed hole size for Chem-Threads. Will accept tubing sizes listed under CG-350.

ADAPTER, UNIVERSAL, INLET. Replacement Components. #12 Compression Cap. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters. Will accept glass, metal or heavy wall plastic tubes having diameters between 7 to 18mm O.D.

ADAPTER, UNIVERSAL, INLET, WITH HOSE CONNECTION. Replacement Components. #110 Viton O-Rings, pkg. of 12. Adapter has the listed size of Chem-Thread at the top for a vacuum tight seal of a variety of tubing diameters.

Coupling Quick Disconnect. Replacement part for various Diamond and Nanopure water systems.

KIMAX Liebig Condenser. 400mm, one piece sealed unit with standard taper 24/40 outer joint at inlet and standard taper 24/40 inner joint at outlet. Inlet end is sloped to avoid trapping condensate. Drip tip at lower end. Hose connections accept 7.9mm ID flexible tubing. Use with ASTM D849.

KIMAX® Medium Length West Condenser, Kimble Chase - 18185-1420, KIMAX® Medium Length West Condenser

Distillation and Reactors Apparatus Full Length [standard taper] 19/38 Joints. Capacity (mL); 1000. [standard taper] Stopper; 27 KIMAX apparatus used in general purpose distillation and phenol distillation. Flask has a flat bottom and a distillation head with a [standard taper] 19/38 joint.

Distillation and Reactors Apparatus Full Length [standard taper] 19/38 Joints. [standard taper] Stopper; 27 Flask Only,1000 mL KIMAX apparatus used in general purpose distillation and phenol distillation. Flask has a flat bottom and a distillation head with a [standard taper] 19/38 joint.

Distillation and Reactors Apparatus Full Length [standard taper] 19/38 Joints. [standard taper] Stopper; 22 Flask Only, 500 mL KIMAX apparatus used in general purpose distillation and phenol distillation. Flask has a flat bottom and a distillation head with a [standard taper] 19/38 joint.

KIMAX Brand Dean-Stark Distilling Receiver with [ST] Joints. Distilling receiver with [ST] 24/40 joints, siphon return arm, and a sidearm bridge that equalizes pressure. Designed from ASTM Specification E123, Style A. (Kimble 22012 10) Capacity: 10 mL Graduated Increments, 0G1 mL: 0.1 mL 1G10 mL: 0.2 mL Tolerances, 0G1 mL: -0.05 mL 1G10 mL: -0.1 mL Length: 23.7 cm.

KIMAX Extraction Apparatus. 30mm ID. 125ml flask capacity. 24/40 joint. Interchangeable standard taper ground joints. Complete with flask, extraction tube, and Allihn condenser.

KIMAX Extraction Apparatus. 40mm ID. 250ml flask capacity. 24/40 joint. Interchangeable standard taper ground joints. Complete with flask, extraction tube, and Allihn condenser.

KIMAX Replacement Condenser. For use with KIMAX Extraction Apparatus. Equipped with interchangeable standard taper ground joint at bottom. Flask capacity: 40ml. Standard taper 45/50 joint.

KIMAX Replacement Condenser. For use with KIMAX Extraction Apparatus. Equipped with interchangeable standard taper ground joint at bottom. Flask capacity: 50ml. Standard taper 55/50 joint.

KIMAX Replacement Extraction Tube. For use with KIMAX Extraction Apparatus. 40mm ID. Standard taper 45/50 joint. Equipped with interchangeable standard taper ground joints. For 33x80mm thimble. 85ml capacity.

KIMAX Replacement Extraction Tube. For use with KIMAX Extraction Apparatus. 50mm ID. Standard taper 55/50 joint. Equipped with interchangeable standard taper ground joints. For 43x123mm thimble. 200ml capacity.

Category