Rxreliance

Pack of 10 refill of actived carbon.

Filter for actived carbon.

Printer.

BVC shuttle, for VACUUBRAND BVC basic, control and professional models. Small wheeled cart allows easy movement of the BVC for ready access to the collection vessel.

Stand. Table stand for VACUUBRAND VHC pro aspiration hand controller. Allows the VHC pro to be set down in on a bench or in a biological safety cabinet, without the tip contactiing the surface.

Freezer Upright Biomedical. With storage down to -30 C easily with constant stable control, Temperature range:-20degreeC to -30degreeC, External dimensions (W x D x H):770 x 830 x 1955mm, Internal dimensions (W x D x H):650 x 700 x 1520mm

Diagnostic Vacuum Gauge, Model 1526, measures system vacuum levels from atmospheric pressure to 10-3 torr, Vacuum analytics for leak, outgassing & pump-down, Soft protective boot & hard travel case, includes sensor, batteries, and carrying case, Power: 4-AA Batteries

Sensor for 1526 Welch diagnostic vacuum gauge - replacement part.

Accessories for DUOSEALÂ® Pumps - 1393J, Exhaust Connectors for High Vacuum Pumps

Accessories for DUOSEALÂ® Pumps - 1400K-04, Major Repair Kit, DuoSeal 1400 Pumps with Mechanical Seal

MAJOR REPAIR KIT for Precision Belt Drive Vacuum Pump, Model D75

MAJOR REPAIR KIT D150

Replacement Exhaust Oil Filter Cartridge. for Rotary Vane Vacuum Pump. Life is approximately 1 year at 10 microns vacuum.

Replacement Exhaust Odor Filter Cartridge. for Rotary Vane Vacuum Pump. Life is approximately 6 months at 10 microns vacuum.

Rotavac Valve Control. For use with Laborota 4000, 4001, 4010, 4011 rotary evaporators. Two-stage pump with linear-guided diaphragms. High suction capacity of 1.7m3/h. Suction capacity for up to 3 evaporators simultaneously. Achieves an ultimate vacuum of 9 mbar.

PUMP SPARE PARTS KIT - 072778

Spare Parts Kit. Spare parts kit for LABOPORT Oil-Free Vacuum Pumps, UN820 models.

Spare Parts Kit. Spare parts kit for LABOPORT Oil-Free Vacuum Pumps, Single-Stage and Two-Stage models UN840FTP and UN842.

PUMP SPARE PARTS KIT - 075097

PUMP SPARE PARTS KIT - 072838

PUMP SPARE PARTS KIT - 072839

PUMP SPARE PARTS KIT - 074178

Exhaust Filter. Exhaust filters trap exhaust oil mist and reduce pump noise. Supplied with housing and element. For use with Welch pump models 8920, 8925, 1376, 1380, 1402, and 1405.

Minor Repair Kit. Includes minor part such as gasket, air filter, pulley key, spring holder, and O-rings necessary to repair Welch DUOSEAL Two-Stage Belt-Drive Vacuum Pumps (54973-133).

Exhaust Filter Oil Mist Eliminator. Inlet connection: 19.1mm. Outlet connection: 12.7mm. For use with Welch vacuum pumps.

Maintained On/Off Foot Switch. For hands-free operation of Welch WOB-L, DryFast, DryFast Ultra Dry Vacuum and Peristaltic Pumps. Made of durable black painted steel. Nonskid base and foot treadle pads ensure secure footing during repeated operations. Ready once plugged. 2.4m cord. 115V, 60Hz.

Swagelok GC Gas Fitting, Brass Tube Reducer. 3.2x6.4mm Brass Tube Reducer.

Vacuum Tubing Kit. For vacuum desiccator cabinet. Includes two 1.22m tubes, inner diameters of 6.35mm and 12.7mm. 2 each 6.35mm and 12.7mm tubing clamps. 6.35mm to 12.7mm barbed reducer.

Inlet Filter. Disposable filter prevents oil back-streaming from vacuum pump and protects the pump from damage from submicron particles. Includes filter assembly and one filter cartridge. Life is approximately 1,000 hours at 10 microns vacuum.

Filer Cartridge. Replacement inlet filter cartridge for 26671-506.

Cartridge. Replacement soda acid cartridge for use with soda acid solvent trap (26673-358).

Cartridge. Replacement charcoal cartridge for use with charcoal solvent trap (26673-360).

Dry Ice Trap. 400mL. Glass body and Plexiglas lid. Recommended as a pre-trap to collect liquids and reduce processing time when used with LABOPORT Oil-free Vacuum Pumps in gel drying, vacuum concentrating, and vacuum ovens. Trap should be placed before pump for maximum efficiency.

FLOW CONTROL 1000PSI - 454-467896

GAUGE PRESSURE SS 0-15 PSI - CG-3002-K-80

GAUGE PRES. VACUUM SS 0-15 PSI - CG-3002-K-85

Universal Vacuum Plate - GA-001, Plate, Universal Vacuum

Hand Vacuum Pump - HAP001, Hand Vacuum Pump

Vacuum Pump with Belt Guard - 1400B-01, Vacuum Pump with Belt Guard

Mist Eliminator. Oil Mist Eliminator with Pump Connection, Eliminates smoke from high vacuum pump exhaust by removing oil mists. Features a durable nylon guard, protects the working environment, reduces noise levels, temperature resistant up to 121C, and retention efficiency of 99.9% at 0.1mm

PUMP PILOT VACUUM REGULATOR KIT - TLD3500K-05

PUMP PILOT SERVICE KIT REPLACEMENT FEET - TLD2500K-04

PUMP REPLACEMENT DIAPHRAGM PILOT3000 - TLD3000K-01

PUMP REPLACEMENT DIAPHRAGM PILOT5000 - TLD5000K-01

PUMP PILOT PRESSURE REGULATOR KIT - TLD3500K-06

PUMP REBUILD KIT PILOT3000 - TLD3000K-03

PUMP REBUILD KIT PILOT5000 - TLD5000K-03

Clean and Overhaul Kit. For RV Dual-Mode, Direct Drive Vacuum Pumps. Contains all the springs, gaskets, seals, and other components required for routine maintenance and whenever the pump is dismantled.

Tubing Set with Filter, for safely handling biological fluid.

Lid for Polyproplene Bottle with quick release couplings/level detection sensor.

Level detection sensor cable, for Safely Handling Biological Fluids, used to connect sensor.

Hose Adapter Kit. For use with Welch vacuum pumps, models 1400, 1405, 1399, 8905. With 1.5m of thick-walled rubber vacuum hose. Pump Inlet O.D.: 11.1mm. Appliance connector O.D.: 6.35mm and 9.5mm.

Hose Adapter Kit. For use with Welch vacuum pumps, models 1402, 1380, 8907, 8912, 8917, 8920, 8925. With 1.5m of thick-walled rubber vacuum hose. Pump Inlet O.D.: 20.6mm. Appliance connector O.D.: 6.35mm and 9.5mm.

GEM Vacuum Pump Vacuum Regulator. Accessory vacuum regulator for rotary evaporators. For use with GEM vacuum pumps and systems (54970-500, -505, -614, -616, -658).

LIQUID END ASSEMBLY F/A/AA/B - 1395

Vacuum Trap Assembly. Accessory for Lubricated Rotary Vane Vacuum/Pressure Pumps (54907-059, -064; 54908-008, -012).

Muffler Assembly. 10u. 6.4mm NPT. Replacement muffler assembly for Lubricated Rotary Vane Vacuum/Pressure Pumps (54907-059, -064; 54908-008, -012).

Muffler Assembly. 10u. 6.4mm NPT. Replacement muffler assembly for Lubricated Rotary Vane Vacuum/Pressure Pumps (54907-059, -064; 54908-008, -012).

Lubricating Oil. 32oz. Accessory for Lubricated Rotary Vane Vacuum/Pressure Pumps (54907-059, -064; 54908-008, -012).

Vacuum Pump Plate. Made from 1.3cm steel plate and is nickel plated for corrosion resistance. 26.7cm outside diamter. Accomadate jars up to 8.9 inch diameter. Comes with a hose barb, which is 9.5mm, an attached vacuum release valve and a rubber gasket for a tight seal.

Smoke Eliminator. Traps smoke and oil mist caused by high pressure operation at the pump exhaust port. Condensed oil is returned to the pump as pressure reduces. For use with model number D-75 and D-150.

MAINTENANCE KIT, DD90

Maintenace and REPAIR KIT, MAJOR, for Precision Direct Drive Vacuum Pump Models DD420 and P420

Maintenace and REPAIR KIT, MAJOR, for Precision Direct Drive Vacuum Pump Models DDC100 and PC100

Maintenace and REPAIR KIT, MINOR, for Precision Direct Drive Vacuum Pump Models DD1420 and P1420

KITSHFT SL RPLCMNT F 55009-088 - 8917K-03

Gold Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Synthetic oil designed for excellent resistance when pumping corrosive gases or vapors. 1L.

Gold Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Synthetic oil designed for excellent resistance when pumping corrosive gases or vapors. 3.78L.

Gold Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Synthetic oil designed for excellent resistance when pumping corrosive gases or vapors. 19L.

Replacement Element. An accessory for Direct Drive High Vacuum Pump, Model 8917 (55009-088).

Replacement Element. An accessory for Acid Neutralization Trap (54994-090). Calcium hydroxide element. Element changes from white to bluish-transparent when spent.

RETROFIT KIT FOR 1376N-01 - 1376N

Pump Adapter Kit for Oil Mist Eliminator. An accessory for CHEMSTAR Vacuum Pump (54994-050).

Pump Adapter Kit for Oil Mist Eliminator. An accessory for CHEMSTAR Vacuum Pumps 54994-052 and 54993-550.

Acid Neutralization Trap. An accessory for CHEMSTAR Vacuum Pumps 54994-052 and 54993-550. NW25 ISO SW flange connection. Capacity: To 340L/minute.

Hermetically Sealed Oil Mist Eliminator. An accessory for Welch Vacuum Pumps. Prevents corrosive vacuum pump exhaust gases from escaping into rooms. Coalesces pump mist from exhaust and allows it to drain back into the pump. Accepts 20.6mm I.D. hose. 12.7Wx19.7Hcm.

DUOSEAL Pump Oil. Recommended for use with DUOSEAL Vacuum Pumps. Features low vapor pressure, chemical stability, ideal viscosity and no additives or inhibitors. 0.95L.

DUOSEAL Pump Oil. Recommended for use with DUOSEAL Vacuum Pumps. Features low vapor pressure, chemical stability, ideal viscosity and no additives or inhibitors. 18.9L.

DUOSEAL Pump Oil. Recommended for use with DUOSEAL Vacuum Pumps. Features low vapor pressure, chemical stability, ideal viscosity and no additives or inhibitors. 208L.

Premium Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Designed to resist breakdown at higher rpms and operating temperatures of direct-drive vacuum pumps. 1L.

Premium Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Designed to resist breakdown at higher rpms and operating temperatures of direct-drive vacuum pumps. 3.78L.

Premium Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Designed to resist breakdown at higher rpms and operating temperatures of direct-drive vacuum pumps. 19L.

Premium Pump Oil. Recommended for use with Welch direct-drive vacuum pumps. Designed to resist breakdown at higher rpms and operating temperatures of direct-drive vacuum pumps. 208L.

Vacuum Pump Exhaust Filter. Exhaust filters trap exhaust oil mist and reduce pump noise. Supplied with housing and element. For use with Welch pump models 1400, 1399, 8905 and 8890.

Exhaust Filter. Exhaust filter traps exhaust oil mist and reduce pump noise. Supplied with housing and element. For use with Welch pump models 8917, 8920, 8925, 1405, 1402, 1376, and 1380.

Exhaust Filter. Exhaust filters trap exhaust oil mist and reduce pump noise. Supplied with housing and element. For use with Models 1397 and 1374.

Replacement Element. Replacement element for use with exhaust filter (55007-009).

Replacement Element. Replacement element for use with exhaust filters 55007-020 and 14227-676.

Replacement Element. Replacement element for use with exhaust filter (55007-042).

Replacement Element. Replacement element for Hermetically Sealed Oil Mist Eliminator (54994-094).

Dry Ice Cold Trap. Removable 2.8L center well for dry ice/alcohol slurry (not acetone). Visible trapping surface. Maintains cold up to 12 hours depending on vapor load. ISO size: 1.27cm ID hose. Use with models 1399, 1400, 1405, 8804, 8890, 1399, 8905, 8907, 8912, 8917, 8920, 8925. 25.4Hx30.5Dcm.

Belt Guard and Base Kit. Belt guard and base kit for unmounted DUOSEAL Single-Stage Belt-Drive Vacuum Pumps, Models 1374 (54993-502) and 1397 (54993-342).

Single Station Thermocouple Gauge Tube. Replacement gauge tube for use with Single Station Thermocouple Vacuum Gauge (55008-180).

V-Belt Kit. Replacement kit for the v-belt in DUOSEAL Single-Stage Belt-Drive Vacuum Pumps, Model 1397 (54993-345, -360, -366, and 54970-610).

V-Belt Kit. Replacement kit for the v-belt in DUOSEAL Single-Stage Belt-Drive Vacuum Pumps, Model 1400 (54973-075, -087, -084, -213, -133, and 54970-602).

Vacuum Tubing. Red rubber vacuum tubing. Supplied in 1.5m length. Tubing I.D.: 11.1mm.

Vacuum Tubing. Red rubber vacuum tubing. Supplied in 1.5m length. Tubing I.D.: 15.8mm.

Vacuum Tubing. Red rubber vacuum tubing. Supplied in 1.5m length. Tubing I.D.: 20.6mm.

V-Belt Kit. Replacement kit for the v-belt in DUOSEAL Single-Stage Belt-Drive Vacuum Pumps, Model 1400 (54974-238, -247, -262, and 54970-604).