• 0
Shop Products $

Nut 102-1 Swagelok Fitting Size:1/16in Material:Brass.

Nut 102-1 Swagelok Fitting Size:1/8in Material:Brass.

Jet. Capillary Dedicated FID Replacement standard, high-temperature, or Siltek treated high-performance versions.For 6890/6850/7890 GCs

Silicone Washers Replacement for FID Collector Housing for 5890/6890/7890 GCs.

Nut Heater Block Retaining Aluminum construction for GC Split/Splitless Injector.

Autosampler Vial. Certified Autosampler Vial, Includes: Assembled clear 2.0 mL Vial with Marking Spot, Cap, Bonded PTFE/Silicone Slit Septa

Tape. ResTape PTFE Benefits and Uses:general gas service Color:Yellow PTFE Each roll is 1/2in x 260in Maximum temperature: 260 C. For threaded connections in a wide range of plumbing materials.

Seal Piston PTFE with Graphite, Black Model number :1050, 1100, 1200.

Battery Replacement for Electronic Crimpers and Decapper.

Wheel. Replacement Cutting for Hi-Duty Tubing Cutter

Cutter. Hi-Duty Tubing Specifically designed to cut 1/8in to 1-1/8in (4 mm to 28 mm) OD tubing. Easily cuts stainless steel, Monel alloy, and other hard-temper materials

Post. Injector Mounting Posts and Parking for 7673/7683 Series Autosamplers for use with 5890/6890/7890 GCs

Ferrule GRAPHPACK 2M for Gerstel CIS 3 and CIS 4 PTV Inlets Fits Column ID:0.53 mm.

Ferrule. Graphite Ferrule Ferrule ID:0.3 mm Fits Column ID:0.10-0.15 mm Material:Graphite Fitting Size:1/16in for Vu2 Union Connectors High-purity, high-density graphite. Stable to 450 C.Smooth surface and clean edges.

Hanger Column for 7890, 6890, 5890, and 5880A Gas chromatography.

Nut Heater Block Retaining Aluminum construction for GC Split/Splitless Injector.

ISO-TM Column Test Mix, Conc. In Solvent and Volume: 500 ug/mL each in toluene, 1 mL/ampule

NPI-350 Column Test Mix, Conc. In Solvent and Volume: 350 ug/mL each in methylene chloride, 1 mL/ampule

OQ Response Linearity Test Standard. Concentration In Solvent and Volume: In isooctane, 1 mL/ampule

Polar ISO Column Test Mix, Conc. In Solvent and Volume: 250 ug/mL each in 1, 2-dichloroethane, 1 mL/ampule

Micro ECD Liner Replacement.

ECD Fused Silica Liner 1.0mm x 1.25 x 39 Replacement.

Ferrule. Fitting 1/16inch, Front and Back Ferrules, Material: Stainless Steel, Precut, micropolished tubing and preseated fittings for quick, easy maintenance of HPLC systems.

Capillary SS Tubing, ID: 0.17mm, Length: 150mm, Material: Stainless Steel,for HPLC System.

Capillary SS Tubing, ID: 0.17mm, Length: 280mm, Material: Stainless Steel,for HPLC System.

Valve to Metering Head. Capillary SS Tubing, Valve to Metering Head ID: 0.17mm, Length: 105mm, Material: Stainless Steel, for HPLC Systems

Capillary Tubing. Capillary Stainless steel Tubing ID: 0.17mm, Length: 105mm, Material: Stainless Steel, for HPLC Systems

Tubing With Fittings, Model number: 1100, ID: 0.17mm, Length: 180mm, Material: Stainless Steel, for HPLC Systems

Tubing With Fittings, Model number: 1050, ID: 0.25mm, Length: 700mm, Material: Stainless Steel, for HPLC Systems

Tubing With Fittings, Model number: 1090, ID: 0.17mm, Length: 130mm, Material: Stainless Steel, for HPLC Systems

Injector Lubricant, Model number: 1050, 1100, for HPLC Systems.

Stator Face Assembly, Model number: 1100, 1200, for HPLC Systems.

Filter, Solvent Inlet, Model number: 1050, 1090, 1100, 1200, for HPLC Systems.

Cartridge, Active Inlet, Model number: 1050, 1100, 1200, for HPLC Systems.

Back Ferrule, Size: 1/4inch, Material: Stainless Steel, Swagelok.

Back Ferrule, Size: 1/8inch, Material: Stainless Steel, Swagelok.

Front Ferrule, Size: 1/18inch, Material: Stainless Steel, Swagelok.

Nut, Brass & Stainless Steel, Size: 1/4inch, Material: Stainless Steel, Swagelok fitting.

O-Ring. Material: Graphite, for Shimadzu 2010 and 2014 GCs, for Splitless Liners, Maximumium Temperature : 450 DegreeC

Tubing copper 1/8inch od 0.065inch id 50ft.

Tubing stainless steel 1/8inch od 0.085inch id 25ft.

Gas regulator 1/8inch tube.

Gas regulator 1/4inch tube.

Siltite u-union ferrule 0.1-0.25mm id column.

Kit siltite u-union 0.32mm id column to 0.53mm id.

Siltite u-union ferrule 0.1-0.25mm id column.

Kit siltite u-union 0.32mm id column.

Kit siltite u-union 0.1-0.25mm id column to 0.53mm id.

Kit siltite u-union 0.1-0.25mm id column.

Siltite u-union kit 0.1-0.25mm id column to 0.32mm id.

Tr-blue septa 11mm 50pk. General purpose septa, Easy to penetrate, Maximum temperature 200-250 degree celsius

Tr-blue septa 9mm 50pk. General purpose septa, Easy to penetrate, Maximum temperature 200-250 degree celsius

Marathon septa 11mm 50pk. Pre-pierced for reliable performance, Up to 400 injections per septa, Maximum temperature 400 degree celsius

Marathon septa 17mm 50pk. Pre-pierced for reliable performance, Up to 400 injections per septa, Maximum temperature 400 degree celsius

Marathon septa 9mm 50pk. Pre-pierced for reliable performance, Up to 400 injections per septa, Maximum temperature 400 degree celsius

Siltite u-union replacement union 0.1-0.32MM id column.

Siltite u-union replacement union 0.1-0.32MM id column.

Siltite u-union ferrule 0.32MM id column.

Siltite u-union ferrule 0.32MM id column.

Hydrocarbon Cartridge Filter. for Use With Inert Carrier, Air, H2, Technique GC and GC/MS, Cartridge Type Hydrocarbon

Oxygen Cartridge Filter with Indicator. for Use With Inert Carrier, Technique GC and GC/MS, Indicator Change Green to Gray

Graphite Ferrule for 0.45-0.53 Pk 10.

Silver seal pk10 for Thermo SSL injector.

Split Straight Liner for , 4mmID, 78.5mm, Pk 5, for Use With (Equipment) GC Injection Port.

Reacti-therm (tm) i heating/ stirring module.

REACTI-BLOCK B-1, Holds 9 x 3 ml or 5 ml Reacti-Vials; 9 holes/21 mm dia. x 32 mm deep.

Bottle. Collection Bottle, Cleaned, assembled, Amber Glass, 250 mL, Cap and PTFE-lined septa for ASE 100/300 Extraction Unit

Tubing Assembly for ASE 200 Extraction Unit, improved design.

Tubing Assembly for ASE 300 Extraction Unit, improved design.

Conical Tube Insert 50ml for Q-sep 3000 Centrifuge.

Autoseal Tip Assembly for ASE 300 Extraction Unit, Siltek treated.

Autoseal Tip Assembly for ASE 300 Extraction Unit, Stainless Steel.

Tube Adaptors 2ml for Q-sep 3000 Centrifuge.

PEEK Washers for ASE 200 Extraction Systems.

Replacement Frits for ASE 100/300 Extraction Systems.

Replacement Extraction Cell End Caps for ASE 100/300 Extraction Systems.

Funnel for ASE 100/300 Extraction Systems.

Filter 30mm for ASE 100/300 Extraction Cells, Cellulose or glass fiber construction.

Sodium Sulfate, Cas number: 7757-82-6, Chemical formula: Na2SO4, Size: 5kg.

Filter 20 mm for ASE 200 Extraction Cells, Cellulose.

O-Rings for ASE 200 and ASE 300 Extraction System Caps, Pk50.

Filter Insertion Attachments(1 mL, 5 mL, 11 mL, 33 mL) for ASE Extraction System 100/200/300.

Valve Attachment for caps for Resprep SPE Manifolds.

Resprep Tool Handle for ASE Extraction System 100/200/300.

Funnel for ASE Extraction system 200, Smooth inner surfaces for easier cleaning.

Extraction Cell Body for ASE Extraction system 100/300 and 150/350, Stainless Steel, 66 mL.

Extraction Cell Body for ASE Extraction system 100/300 and 150/350, Stainless Steel, 34 mL.

Threaded Cap Insert for ASE 300 Extraction system, Stainless Steel.

Threaded Cap Insert for ASE 200 Extraction system, Stainless Steel.

Autoseal Tip Assembly for ASE 200 Extraction Systems, Stainless Steel.

Autoseal Tip Assembly for ASE 200 Extraction Systems, Siltek Treated.

Liner, PerkinElmerAutosystem/Clarus500/Clarus600 4mm Inner diameter, Split/Splitless Tapered FocusLiner Pack 25

Liner, Varian 1075/1077, 4mm Internal diamter, REST Split Quartz Wool Pack of 1.

Tubing. Fused silica capillary VSPD tubing phenyl deactivated 5m x 220um id/363um, Chemically inert and thermally stable up to 380C, Suitable for organic and aqueous solvents, Clean entry for on-column injection, Ideal for biotechnology applications, Reduces likelihood of blockages

Tubing. Fused silica capillary VSPD tubing phenyl deactivated 5m x 320um id/430um, Chemically inert and thermally stable up to 380C, Suitable for organic and aqueous solvents, Clean entry for on-column injection, Ideal for biotechnology applications, Reduces likelihood of blockages

Tubing. Fused silica capillary VSPD tubing phenyl deactivated 5m x 530um id/680um, Chemically inert and thermally stable up to 380C, Suitable for organic and aqueous solvents, Clean entry for on-column injection, Ideal for biotechnology applications, Reduces likelihood of blockages

Tackified Entrance Mat With Multi-Layered Clean Films, Grey, 18in X36in, 30 Sheets/Mat.

Ferrules silflow fingertight 0.8mm, pack 10.

Ferrules silflow fingertight 0.75mm, pack 10.

Tubing. Silflow stainless steel capillary tubing 75 cm long 1.1mm od sleeved to 1/16 at one end, Gas Chromatography Replacement Parts, highly efficient and reliable micro fluidic platform features chemically deactivated stainless steel channels avoiding active sites

Category