• 0
Shop Products $

Ferrules silflow fingertight 0.55mm, pack 10.

Tubing. Fused silica tubing deactivated replacement for silflow 2m x 50umx 363um, features chemically deactivated stainless steel channels avoiding active sites experienced with conventional connections, reliable zero dead volume connection.

Tubing. Fused silica tubing deactivated replacement for silflow 2m x 100umx 363um, features chemically deactivated stainless steel channels avoiding active sites experienced with conventional connections, reliable zero dead volume connection.

Tubing. Fused silica tubing deactivated replacement for silflow 2m x 150umx 363um, features chemically deactivated stainless steel channels avoiding active sites experienced with conventional connections, reliable zero dead volume connection.

Tubing. Fused silica tubing deactivated replacement for silflow 2m x 200umx 363um, features chemically deactivated stainless steel channels avoiding active sites experienced with conventional connections, reliable zero dead volume connection.

Siltite metal nuts, Slotted, (packet of 5) injector.

Siltite metal - initial installation kit (10 ferrules 2 nuts)0.32mm, columns for qp5000/5050 standard mass spectrometry interface

Siltite metal nuts - qp5000/5050 standard mass spectrometry interface (packet of 5).

Siltite metal nuts (packet of 5) varian gas chromatography.

Metal - initial installation. Siltite metal - initial installation (10 ferrules 2 nuts 2 base seals) 1/32, for split or splitless injector

Reducing Ferrule, Short, Hole:1/8inch, 9.5x4.6mm, Material: Graphite, For 1/4 fitting pack10.

Liner varian 1078/1079 1.8mm, scintered glass large volume injection pack 25.

Tubing. Fused silica tubing non-deactivated 10m x 50um id/220um, tubing, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated 10m x 220um/363um, tubing, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated25umx 363um, continuous length per meter, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated50umx 363um, continuous length per meter, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated75umx 363um, continuous length per meter, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated150umx 363um, continuous length per meter, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Tubing. Fused silica tubing non-deactivated 100umx 363um, continuous length per meter, Used in a wide range of capillary GC, LC and Bioanalytical applications, Tubing protected with a high temperature Polyimide resin

Siltite mini union 0.8mm id for 1/32 columns.

Siltite mini union ferrules 1/32 column pack10.

Spanner 3/16inch x 1/4inch AF, Stainless Steel, For standard nuts use reducing short ferrules.

Extended nuts, 1/8inch x 4mm Stainless steel, pack5.

Extended nuts, 1/8hole extentedStainless steel, pack5.

Bulkhead Union with 0.5mm, and 0.35mm restriction at one end, Material: Glass Lined Stainless Steel, allows plate mounting of the union, for use with fused silica, low dead volume, high temperature applications

Bulkhead Union with 0.4mm, and 0.25mm restriction at one end, Material: Glass Lined Stainless Steel, allows plate mounting of the union, for use with fused silica, low dead volume, high temperature applications

Bulkhead Union with 0.8mm, No restiction, Material: Glass Lined Stainless Steel, allows plate mounting of the union, for use with fused silica, low dead volume, high temperature applications

Siltite metal nuts (packet of 5) thermo gas chromatography and mass spectrometry.

Siltite ferrules for 0.10-0.25mm ID columns pack10.

Siltite ferrules for 0.32mm, column pack10.

Siltite ferrules for 0.53mm, column pack10.

Ferrule. Siltite ferrule 1/32 column qp5000/5050 wide bore mass spectrometry interface qp2010 injector and qp2010 standard mass spectrometry interface, pack10

Ferrule. Siltite ferrules, 0.32mm, columns gas chromatography14a gas chromatography17a gas chromatography2010 and gas chromatography2014 detector / injectors, Pack10

Ferrule. Siltite ferrules, 0.53mm, columns gas chromatography14a gas chromatography17a gas chromatography2010 and gas chromatography2014 detector / injectors, pack10

Splitless focusliner 5mm, for use with 50mm needle pack 5.

Focusliner, 3.4mm, split/splitless tapered pack 5.

Liner, 3.4mm, split/splitless focusliner, pack 5.

Liner, Split / Splitless with Single Taper, 3.4x95, pack5.

Liner shimadzu 17a/2010/2014/2025 3.4mm id split/splitless with middle gooseneck pack 5.

Liner thermo tq (ce) trace/focus scintered glass large volume injection pack 5.

Sealing Ring. Graphite Sealing Ring - Can be used at temperatures up to 325 C. For use with 4mm OD liners, Pack10

O-ring viton for liner pack 10.

Liner, Split/Splitless Single Taper, pack5.

Liner varian 1075/1077 4mm, split tapered focusliner pack1.

Liner varian 1078/1079 split/splitless 3.4mm, single taper pack 25.

Splitless focusliner with top end restriction for use with 70mm needle, 5mm, pack 25.

FocusLiner, Split / Splitless, 4mm, pack25.

Liner, straight-through liner, Split, 4mm, pack25.

Inlet Seal. Dual Vespel Ring Cross-Disk Inlet Seals, Dual Vespel Ring Cross-Disk Inlet Seals, Washerless, leak-tight seals, Ideal for high-flow split applications 500 Ml/min, 0.8 mm

Inlet Seal. Flip Seal Dual Vespel Ring Inlet Seals, 1.2 mm, Gold-Plated, Reversible, two-sided design allows significantly more analyses than other seals, at the same price-simply use, flip, then use again, Very little torque required to make seal-reduces operator variability.

Kit. EZ Twist Top split and splitless Injection Port Assembly Kit, for gas chromatography, Siltek Treated, Weldment removal tool allows for quick removal of the hot weldment without fingers ever touching hot surfaces

Inlet Liner. Double Taper Inlet Liner, 3.5 mm, For 17A, 2010, and 2014 Gas chromatography equipped with split and splitless inlets, 95 mm, 5.0 mm, Borosilicate Glass

Inlet Liner. Taper Inlet Liner, 3.5 mm, For 17A, 2010, and 2014 Gas chromatography equipped with split and splitless inlets, 95 mm, 5.0 mm, Borosilicate Glass, pack5

EZ Injection Port Assembly Kit. EZ Twist Top Split/Splitless Injection Port Assembly Kit, Includes: split/splitless weldment, shell weldment, 2 weldment O-rings, Siltek dual Vespel ring inlet seal, reducing nut, stainless steel capillary nut for use with 1/16in ferrules, and weldment removal tool

Septa. Merlin Microseal Septa, 400 Degree C max injection port temperature. Includes: Nut, Adapter, O-Ring, & 1 General-Purpose Microseal, For Bruker/Varian Gas chromatography

Reducing Union, Size: 1/4in to 1/16in, Material: Brass, Accessory for gas chromatography, pack 5.

Tube End Reducer, Size: 1/8in to 1/16in, Material: Brass, Accessory for gas chromatography, Pack 5.

Port Connector, Size: 1/8in to 1/4in, Material: Brass, Accessory for gas chromatography, Pack 5.

Toggle Valve, Shut-Off Gas Valve, Size: 1/8in, Material: Brass, Accessory for gas chromatography.

Valve. Metering Gas Valve, straight, Material: Chrome-Plated Brass, Size: 1/8in, Accessory for gas chromatography

Ball Valve, Shut-Off Gas Valve, Size: 1/8in, Material: Stainless Steel, Accessory for gas chromatography

Vernier Knob for Swagelok Metering Gas Valves, Accessory for gas chromatography.

Hub-Cap Filter kit. Hub-Cap Filter Kit for 4 L or Wheaton bottles, includes: bottle adaptor with nut, filter inlet cap, grid support, vacuum hose barb, tube compression fitting, grid, 0.22 um/0.45um filter membrane, ultra chemical resistant, FEP-lined Tygon tubing, box with shrink-wrap insert

Static In-Line Mixer. HyperShear Static In-Line Mixer, Material: PEEK, Volume: 150 uL, Reduced baseline noise, Increased sensitivity, Improved gradient accuracy for more reproducible results, Increased reaction efficiency in post-column derivatization.

Solvent Filter. Bluestem Glass Solvent Filter, provides clean mobile phase to extend the life of columns and pump seals. Connects to standard 1/8in OD (3.2 mm) PTFE tubing using your existing frit adaptor, allows instant visual confirmation of upright filter orientation.

Cap. Hub-Cap 4-Liter Bottle Tops, assembly of the bottle cap and plug, Use them instead of plastic paraffin film, aluminum foil, or tape on your mobile phase reservoirs.

Ferrule. Standard Ferrule, ID: 0.4 mm, Fits Column ID: 0.10/0.15/0.18/0.25/0.28 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, Fit G 0.28mm ID Fused Silica Columns, for PerkinElmer Gas chromatography, Stable to 400 Degree C.

Ferrule. Compact Ferrule, ID: 0.4 mm, Fits Column ID: 0.25/0.28 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, Fit 0.45/0.53mm ID Fused Silica Columns, for PerkinElmer Gas chromatography, Stable to 400 Degree C.

Heater/Sensor Assembly, Use with FID, TCD, NPD, and split/splitless inlets, for Agilent 6850/6890/7890 and Accessory for Gas chromatography

Capillary Ferrule 0.3 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, ID: 0.3 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, preferred for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines

Capillary Ferrule 0.4 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID:0.10/0.15/0.18/0.25/0.28 mm, ferrule ID: 0.4 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, and preferred for vacuum and high-pressure uses

Capillary Ferrule 0.5 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.32 mm, ferrule ID: 0.5 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Capillary Ferrule 0.5 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.32 mm, ferrule ID: 0.5 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Reducing Ferrule 0.4 mm. Reducing Ferrule, Fits Column ID: 0.25 mm, Ferrule ID: 0.4 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/8in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, For mass spectroscopic transfer lines

Reducing Ferrule 0.5 mm. Reducing Ferrule, Fits Column ID: 0.25 mm, Ferrule ID: 0.5 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/8in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, For mass spectroscopic transfer lines

Reducing Ferrule 0.8 mm. Reducing Ferrule, Fits Column ID: 0.25 mm, Ferrule ID: 0.8 mm, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/8in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, For mass spectroscopic transfer lines

Capillary Ferrule 0.6 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.28 mm, ferrule ID: 0.6 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Capillary Ferrule 0.8 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.45/0.53 mm, ferrule ID: 0.8 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, preferred for vacuum and high-pressure uses, Stable to 400 deg C

Capillary Ferrule 0.8 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.45/0.53 mm, ferrule ID: 0.8 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, preferred for vacuum and high-pressure uses, Stable to 400 deg C

Capillary Ferrule 1.0 mm. Capillary Ferrule, Standard, Material: VG1, 85% Vespel/15% Graphite, Fits Column ID: 0.75 mm, ferrule ID: 1.0 mm, for 1/16In Compression-Type Fittings, For micropacked column, Seal with minimal torque, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Compact Ferrule 0.4mm. Compact Ferrule, Fits Column ID: 0.25/0.28mm (Fused Silica Column), Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, ID: 0.4mm, Seal with minimal torque, reusable and preferred for vacuum and high-pressure uses, Stable to 400C, for mass spectroscopy transfer lines

Compact Ferrule 0.5 mm. Compact Ferrule, Fits Column ID: 0.32 mm (Fused Silica Column), Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, ID: 0.5 mm, Seal with minimal torque, reusable, and for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines

Compact Ferrule 0.5 mm. Compact Ferrule, Fits Column ID: 0.32 mm (Fused Silica Column), Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, ID: 0.5 mm, Seal with minimal torque, reusable, and for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines

Compact Ferrule 0.8 mm. Compact Ferrule, Fits Column ID: 0.45/0.53 mm (Fused Silica Column), Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, ID: 0.8 mm, Seal with minimal torque, reusable, and for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines

Ferrules for Micropacked Column, Standard, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/16in, ID: 1/16in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectorascopy transfer lines, also for 1/8, 1/4-In Fitting

Capillary Ferrule 1.0 mm. Capillary Ferrule, Material: VG2, 60% Vespel/40% Graphite, Fits Column ID: 0.28 mm, ferrule ID: 1.0 mm, for 1/16 in Compression-Type Fittings, For micropacked column, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C

Standard Ferrule 1/8in. Standard Ferrule, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/8in, Ferrule ID: 1/8in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines, also for 1/16, 1/4 in Fittings

Standard Ferrule 1/4in. Standard Ferrule, Material: VG1, 85% Vespel/15% Graphite, Fitting Size: 1/4in, Ferrule ID: 1/4in, Seal with minimal torque, reusable, and preferred for vacuum and high-pressure uses, Stable to 400 deg C, for mass spectroscopy transfer lines, also for 1/16, 1/8 in Fittings

Mass Spec Cleaning Kit Replacement Parts Kit, for GC-MS Cleaning Kit, Includes: cloths, micro mesh sheets, small and large gloves

Capillary Installation Gauge, for TRACE & Focus SSL (M4 Ferrules), Seats ferrule onto column for consistent installations, Prevents crushed column ends, Made from high-quality stainless steel, For use with graphite ferrules only

Liner Cap Removing Tool, for GCs: Focus GC, TRACE GC Ultra & TRACE GC x GC, Easily loosens the liner cap from the injector, Unique, ergonomic handle-easy to grip

Metric Wrench Set, High-quality 6 x 7 mm, 8 x 10 mm and 16 x 17 mm wrenches for tightening a wide variety of fittings

Open-End Wrench, High-quality wrenches for tightening capillary fittings, Size: 3/8 inchx7/16 inch.

Spanner Wrench, for 5890/6850/6890/7890 FID Collector Assemblies, Easily remove the nut from the FID collector without damaging the nut, Unique, ergonomic handle-easy to grip, Fits all instrument models

Claw Holder Kit (includes The Claw and holder), Easily removes hot liners from injection ports, 4 mL vials can be replaced when dirty

Mass Spec Cleaning Kit without Dremel Tool, GC-MS Cleaning Kit, Includes: Lint-free nylon gloves, Lint-free cotton cloth, Micro mesh 4 x 6 sheet, Aluminum oxide, Cotton tip applicators, Tweezers, large/small, Septum puller, Dremel tool, battery-operated, Tool kit bag

Flashlight with Swivel Head, Ideal for tight spaces-like inside a GC oven, Uses two AA batteries (included)

Claw, Easily removes hot liners from injection ports, 4 mL vials can be replaced when dirty.

PressFit Connector. Defined PressFit Connector, Material: Borosilicate Glass (Deactivated), Fits Column ID: For 0.18/0.25 mm to 0.32 mm ID Columns, Color: Red to Black (end codes), ID-specific ends for better sealabilit, Repair a broken column, Connect guard column to analytical column

PressFit Connector. Defined PressFit Connector, Material: Borosilicate Glass (Deactivated), Fits Column Internal Diameter: For 0.32 mm to 0.32 mm ID Columns, Color: Black to Black (end codes), ID-specific ends for better sealabilit, Repair a broken column, Connect guard column to analytical column

Category