• 0
Shop Products $

Work surface stainless steel. High chemical and mechanical resistance. Rounded corners to facilitate. Built in spill tray. FLOW714

Back panel clear for 360 viewing. FLEXM321.

Back panel clear for 360 viewing. FLEXM391.

Back panel clear for 360 viewing. FLEXXLS483.

Back panel clear for 360 viewing. FLEXXLS714.

Mobile metal cart with locking casters for FLOW/FLEX/BIO 32in.

Work bench fixed metal for FLOW/FLEXXLS 48in.

Work bench fixed metal FLOW/FLEX 71in.

Filter saturation alarm. Automatic alarm to detect filter saturation, Embedded semi-conductor devices that is added to the control panel. The MOLECODE senses filter saturation within the detection chamber and alerts through the control panel, solvents according to NF X 15 211 : 2009 standard

Light Bulb replacement for Protector Echo Filtered Fume Hood.

Remote Control. Wireless ADA Remote Control for fan and light switches for Protector Echo Filtered Fume Hoods, allows persons in wheelchairs and/or shorter individuals to access the fan and light controls.

Sash Opening Reduction Wing kit. Sash Opening Reduction Wing Kit to allow 100 fpm face velocity at 16in sash stop for 6 ft Protector Echo Filtered Fume Hoods, Set of 2 wings and mounting hardware. Detents hinges to maintain open position for loading and closed position for normal operation

Sash Opening Reduction Wing kit. Sash Opening Reduction Wing Kit to allow 100 fpm face velocity at 16in sash stop for 8 ft Protector Echo Filtered Fume Hoods, Set of 2 wings and mounting hardware. Detents hinges to maintain open position for loading and closed position for normal operation

User Card. RFID (Radio Frequency Identification) User Card for Protector Echo Filtered Fume Hoods. Memory system of the hood tracks user fume hood time usage. Can turn lights and fans on and off. Must have other type of card for other functionality.

Work Surface. SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutouts, left rear and right side. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate. Interior of Protector Hood

Work Surface. SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutout, left side, Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate, Interior of Protector Hood

Work Surface. SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutouts, left side and right rear, Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate, interior of Protector Hood

Work Surface. SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutouts, left and right side, Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate, interior of Protector Hood

Work Surface. SpillStopper Work Surface, 36. 0in deep, 6 ft, Right side cupsink cutout. Not for use with Protector Solvent Storage Cabinets. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Cupsink separate, interior of Protector Hood

Work Surface. SpillStopper Work Surface, 36. 0in deep, 6 ft, Left and right rear cupsink cutouts, Dimensions: 60. 0in w x 36. 0in d x 1. 25in h, Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Cupsink separate, interior of Protector Hood

Work Surface. SpillStopper Work Surface, 36. 0in deep, 8 ft, Left and right rear cupsink cutouts, Dimensions: 60. 0in w x 36. 0in d x 1. 25in h, Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Cupsink separate, interior of Protector Hood

Work Surface. SpillStopper Work Surface, 36. 0in deep, 8 ft, Left rear and right side cupsink cutouts. Not for use with Protector Solvent Storage Cabinets. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Cupsink separate, interior of Protector Hood

Work Surface. SpillStopper Work Surface, 36. 0in deep, 6 ft, Left side cupsink cutout. Not for use with Protector Solvent Storage Cabinets. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Cupsink separate, interior of Protector Hood

Administrator Card. RFID(Radio Frequency Identification) Administrator Card for Protector Echo Filtered Fume Hood, Provides full access to view stored information on the fume hood.

Software. GGuard Remote Monitoring Software for Protector Echo Filtered Fume Hood. Manages and provides data via email to facility manager. Provides access to usage authorization, filter usage and ID, filter saturation detection, sash position, blower speed, lab air pollution.

Work Surface. SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutouts, left side and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutouts, left and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutout, right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutout, left rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 4 ft w x 36in d, with cupsink cutouts, left and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 5 ft w x 36in d, with cupsink cutouts, left and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 5 ft w x 36in d, with cupsink cutouts, left rear and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 5 ft w x 36in d, with cupsink cutout, left side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 5 ft w x 36in d, with cupsink cutouts, left side and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 5 ft w x 36in d, with cupsink cutouts, left and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 8 ft w x 36in d, with cupsink cutouts, left side and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 8 ft w x 36in d, with cupsink cutouts, left and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Maintenance Card. RFID (Radio Frequency Identification) Maintenance Card for Protector Echo Filtered Fume Hood, Maintenance card has full setting functionality and provides full access to change anything on the settings of the hood.

Work Surface. SpillStopper Work Surface, 3 ft w x 36in d, no cutouts, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutout, right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutout, right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutout, left rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutouts, left and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutouts, left rear and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 3 ft w x 36in d, with cupsink cutout, left side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 6 ft w x 36in d, with cupsink cutouts, left rear and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 6 ft w x 36in d, with cupsink cutout, left side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 6 ft w x 36in d, with cupsink cutouts, left side and right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 6 ft w x 36in d, with cupsink cutouts, left and right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 8 ft w x 36in d, with cupsink cutout, right rear, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Work Surface. SpillStopper Work Surface, 8 ft w x 36in d, with cupsink cutout, right side, interior of Protector Hoods. Pre-drilled 1. 5in diameter holes for venting and 2. 5in diameter holes for plumbing. Pre-cut 6inx3in oval cupsink cutout optional. Cupsink separate

Filter. AS Filter, single Molecular for Organic Vapours - Size F2 for fume Hood, For use with CaptairChemtrap Horizontal Column (H402) and CaptairStore 832

Filter. F2 BE filter for Organic vapors and acids, For use with CaptairChemtrap Horizontal Column (H402) and CaptairStore 832

Filter F1AS for organic vapours (AS), For use with CaptairChemtrap Vertical Column (V201).

Filter F1BE polyvalent for acid and organic vapours, For use with CaptairChemtrap Vertical Column (V201)

Basic 47 hood w/epoxy-coated liner. 115v 60 Hz. 47 x 25 x 48. Glacier white. Epoxy-coated steel. 16 gauge epoxy-coated steel liner & exterior. includes air foil, 2-piece adjustable baffle, tempered safety glass sash, and light.

Basic 70 Laboratory Hood. 6' model. With air foil, 2-piece adjustable baffle, tempered safety glass sash and pass-through port. Accepts up to 3 service fixtures, 2 duplex receptacles and cupsink with turret. 178Wx63.5Dx122Hcm. 220V, 50Hz. Without motor and blower. 0.57@100fpm (1120cfm).

HOOD, PP/ACRYLIC, FUME. A practical and cost effective alternative to metal fume hoods.

Portable Polyethylene Benchtop Fume Hood. One-piece, molded polyethylene construction. Has a 15cm OD ventilating stack that accepts ducting from a blower or central exhaust system. 36x83cm front opening. 350cfm recommended. 107Lx51Dx76Hcm.

Canopy hood 72x30x18in. 115v 60 Hz. 72 x 30 x 18. Glacier white. Epoxy-coated steel. Designed to vent non-toxic materials such as heat, steam & odors from large/bulky apparatus. includes built-in baffle to increase air velocities & enhance capture efficiency. mount no more than 12 above equipment.

Accessories for Extractor Kit 2000 Fume Extractor, Nederman - 70311427, Replacement Gas Filter

Clean Aire II Ductless Fume Hoods - 90305, Clean Aire II Fume Hood, Hood Only

Dead Air Box, 32inch wide, 220v.

Slip Hatch Access Port.

Bonded carbon filter for Esters, Hydrocarbons, Organic Vapors, Sulfur Compounds and Others.

Activated Bonded Carbon Chemisorptive Filters for Ammonia and Amines.

Activated Bonded Carbon Chemisorptive Filters for Ammonia and Amines For H-6593-1.

Filter. Activated Bonded Carbon Chemisorptive Filters for Ammonia and Amines, Heavy Duty, used for High Volume

Carbon filter bonded layer.

Filter. Bonded Carbon Filter for Formaldehyde, keeps Systems ductless fume hoods apart from all other products, gas phase bonded, providing effective containment of toxic vapors, gases, and fumes while minimizing exposure to hazardous carbon dust

HEPA Filter for Containment of Particulate For Model: H-6595-21.

Bench top fume hood, dimension: 56X25X47 inch, Material: polythene.

VWRCaptair Bio 391 - Pcr Worstation.

Gf4.As Carbon Filter For 834 And 1634 Units.

Captair 633 Smart. Ductless fume hood, filtering, Captair 633 Smart, Air Flow: 660 m3/h - 135 CFM, 220V/50-60Hz, 160W, Velocity: 0.4-0.6 m/s/79-118 fpm, Oblong or new reverso sash, Corrosion resistant electro-galvanized steel coated with anti-acid polymer, overall Dimension: 1604x1340mm

Captair 714 Smart. Ductless fume hood, filtering, Captair 714 Smart, Air Flow: 880 m3/h - 135 CFM, 220V/50-60Hz, 620W, Velocity: 0.4-0.6 m/s/79-118 fpm, Total openings or new reverso sash, Corrosion resistant electro-galvanized steel coated with anti-acid polymer, overall Dimension: 1805x1340mm

Captair 834 Smart, Ductless filtering chemical storage cabinet with Pull Out Doors with storage trays, Air Flow: 220 m3 /h, 80-220V/50-60 Hz, 75W, Doors: Clear, chemical resistant acrylic for easy viewing, 100 x 1L bottles, 8 fixed trays, Absorbing mats: 8

Captair 822 Smart, Ductless filtering chemical storage cabinet With Pullout Drawer (Key lock), Air Flow: 70m3/h, 80-220V/50-60 Hz, 35W, Doors: Clear, chemical resistant acrylic for easy viewing, 25x1L bottles(retention tray), 50xbottles(sliding shelf), 1 tray+1 sliding shelf

Halo Smart Chemplus Solvent. Laboratory Grade Air Filtration System, Ceiling Mounted, Pre-filter Included, Halo Smart Chemplus Filter, Detects and filters a broad range of chemicals (using Neutrodine Filtration technology), CFM: 220 m3/h, particulate prefilter, Sensor: Semiconductor, 80-240V, 50W

Halo Smart VOC, Laboratory air filtration system, Detects and filters volatile organic compounds, CFM: 220 m3/h, particulate prefilter, Sensor: Semiconductor for VOCs, 80-240V 50/60hz, Energy consumption: 50W, Ports: 1 x Ethernet Port, Sensor: Semiconductor

Halo Smart Chemplus Filter, for Laboratory Grade Air Filtration System, Ceiling Mounted, Pre-filter Included, Detects and filters a broad range of chemicals (using Neutrodine Filtration technology), CFM: 220 m3/h, particulate prefilter, Sensor: Semiconductor, 80-240V, 50W

Fixed Metal Bench Captair 481 Smart. Fixed Metal Bench, Captair 481 Smart, Benchcap, Accessories for Ductless filtering fume hoods 220 V / 50-60 Hz,

Work Surface Glass. Work Surface, Glass, Captair 632 Smart, Benchcap, Accessories for Ductless filtering fume hoods 220V/50-60 Hz, Work surfaces with built in spill tray, Tempered glass work surface with framing, Ergonomic arm rest for comfortable working, for precision weighing operations

Work Surface Resin. Work Surface, Resin, Captair 632 Smart, Benchcap, Trespa Top Labplus, Accessories for Ductless filtering fume hoods 220V/50-60Hz, made of phenolic resin with built-in spill tray with an ergonomic arm rest, High chemical & mechanical resistance, for precision weighing operations

Back Panel Captair 632 Smart, Clear acrylic panel for easy viewing, Transperant, Accessories for Ductless filtering fume hoods 220 V / 50-60 Hz,

Fixed Metal Bench Captair 632 Smart. Fixed Metal Bench, Captair 632 Smart, Benchcap, Accessories for Ductless filtering fume hoods 220 V / 50-60 Hz,

Work Surface Glass. Work Surface, Glass, Captair 392 Smart, Benchcap, Accessories for Ductless filtering fume hoods 220V/50-60 Hz, Dimension(WXH): 904mmX585 mm, Work surfaces with built in spill tray, Tempered glass work surface with framing, Ergonomic arm rest for comfortable working

Work Surface Glass. Work Surface, Glass, Captair 483 Smart, Benchcap, Accessories for Ductless filtering fume hoods 220V/50-60 Hz, Dimension(WXH): 1179mmX585 mm, Work surfaces with built in spill tray, Tempered glass work surface with framing, Ergonomic arm rest for comfortable working

Back Panel Captair 483 Smart, Clear acrylic panel for easy viewing, Transperant, Accessories for Ductless filtering fume hoods 220 V / 50-60 Hz,

Work Surface Glass. Work Surface, Glass, Captair 391 Smart, Benchcap, Accessories for Ductless filtering fume hoods 220V/50-60 Hz, Dimension(WXH): 903mmX470mm, Work surfaces with built in spill tray, Tempered glass work surface with framing, Ergonomic arm rest for comfortable working

Work Surface Resin. Work Surface, Resin, Captair 391 Smart, Benchcap, Trespa Top Labplus, Accessories for Ductless filtering fume hoods 220V/50-60Hz, made of phenolic resin with built-in spill tray with an ergonomic arm rest, High chemical & mechanical resistance, for precision weighing operations

Back Panel Captair 391 Smart, Clear acrylic panel for easy viewing, Transperant, Accessories for Ductless filtering fume hoods 220 V / 50-60 Hz,

Fixed Metal Bench Captair 391 Smart. Fixed Metal Bench, Captair 391 Smart, Benchcap, Accessories for Ductless filtering fume hoods 220 V / 50-60 Hz,

Work Surface Glass. Work Surface, Glass, Captair 481 Smart, Benchcap, Accessories for Ductless filtering fume hoods 220V/50-60 Hz, Dimension(WXH): 1200mmX470mm, Work surfaces with built in spill tray, Tempered glass work surface with framing, Ergonomic arm rest for comfortable working

Back Panel Captair 481 Smart, Clear acrylic panel for easy viewing, Transperant, Accessories for Ductless filtering fume hoods 220 V / 50-60 Hz,

Captair 321 Smart. Ductless fume hood, filtering, Captair 321 Smart, Air Flow: 220m3/h-135CFM, 220V/50-60Hz, 65 W, Velocity: 0.4-0.6 m/s/79-118 fpm, Oblong Sash open, Filtration module: Polypropylene, Corrosion resistant electro-galvanized steel coated with anti-acid polymer, Dimension: 780x1285mm

Captair 481 Smart. Ductless fume hood, filtering, Captair 481 Smart, Air Flow: 220m3/h-135CFM, 220V/50-60Hz, 65 W, Velocity: 0.4-0.6 m/s/79-118 fpm, Oblong Sash open, Filtration module: Polypropylene, Corrosion resistant electro-galvanized steel coated with anti-acid polymer, Dimension: 1260x1285mm

Captair 632 Smart. Ductless fume hood, filtering, Captair 632 Smart, Air Flow: 660 m3/h - 135 CFM, 90 - 264 V /50-60Hz, 121W, Velocity: 0.4-0.6 m/s/79-118 fpm, Oblong slash openings, Corrosion resistant electro-galvanized steel coated with anti-acid polymer, 1/4 inch synthetic glass panel

Captair 392 Smart. Ductless fume hood, filtering, Captair 392 Smart, Air Flow: 220m3/h-135CFM, 220V/50-60Hz, 105W, Velocity: 0.4-0.6 m/s/79-118 fpm, Total openings or new reverso sash, Corrosion resistant electro-galvanized steel coated with anti-acid polymer, Dimension: 1005x749mm

Captair 483 Smart. Ductless fume hood, filtering, Captair 483 Smart, Air Flow: 660 m3/h - 135 CFM, 220V/50-60Hz, 160 W, Velocity: 0.4-0.6 m/s/79-118 fpm, Total openings or new reverso sash, Corrosion resistant electro-galvanized steel coated with anti-acid polymer, Dimension: 1280x1515mm

Category