Rxreliance

2-STP VITON 1.30MMID 12PK

TUBING MFLEX FDA VITON NO. 24 25FT

TUBING PTFE 2.48X4MM 25FT

SCIENCEWARE 28-Piece Fitting Kit. All the basic components for a fluid handling set-up. Includes 5 straight connectors, 4 stepped fittings, 8 Y fittings, 4 T connectors, 5 quick-disconnect fittings, and 2 flow control tubing clamps in a plastic organzier box. Compatible with tubing 4.7-12.7mm.

PTFE TUBING NATURAL 1/8X0.063 IN 3 M - 27845

PTFE TUBING NATURAL 1/8X0.094 IN 3 M - 27844

CLAMP, ACETAL, TUBING, 12/PKG, 72/CASE. Strong acetal plastic clamp with serrated jaws provides secure closure on tubing with a wall of.82 mm (1/32 ) or thinner.

Autoclavable Tubing Clamp. Acetal clamp will not distort, rust, or corrode, and features 12-position ratchet control from full open to complete closure. Clamp is for tubing up to 19mm OD.

Autoclavable Tubing Clamps. Acetal clamps will not distort, rust or corrode. Single position, on-off clamp is for use with thin walled tubing under 4.7mm OD. Clamps give positive shut-off with finger tip control.

Tubing Cutter, Plastic. Pocket-size. Cuts flexible tubing with an outer diameter up to 19mm. The jaw is lightly spring-loaded and closes automatically for safety. The replaceable, hardened steel blade produces clean, straight cuts. Length: 76mm.

VWR Amber Latex Rubber Tubing. Recommended for all kinds of glass connections where a highly elastic, clinging tubing is desired. Translucent and durable. Durometer hardness: Shore A, 35. Tensile strength: 3500 psi. Coil length: 15.2m. 7.9IDx14.3ODmm. Wall thickness: 3.2mm.

Tubing Holder. Polypropylene clip captures and holds flexible tubing firmly in place in beakers or other open containers. Fits snugly over the edge and has a 51mm (2in) long arm with a hole to accept tubing up to 9.5mm (3/8in) O.D. Autoclavable. 6 per bag.

Three-Way Stopcock. Bore size: 4mm. With removable leak proof plug made of chemical-resistant, non-stick fluoropolymer resin TFE, these polypropylene stopcocks have serrated tubulations that accept 6.4mm to 9.5mm I.D. tubing. Pressure rating: 35psi.

Polypropylene Stopcock. With removable leak proof plug made of chemical-resistant, non-stick Teflon TFE. Serrated tubulations accept 6.4mm to 9.5mm I.D. tubing. 3-way models allow connection of any two or all three arms. Pressure rating is 240 KPa (35 psi). 6 per case.

Two-Way Stopcock. Bore size: 4mm. With removable leak proof plug made of chemical-resistant, non-stick fluoropolymer resin TFE, these polypropylene stopcocks have serrated tubulations that accept 6.4mm to 9.5mm I.D. tubing. Pressure rating: 35psi.

Two-Way Stopcock. Bore size: 2mm. With removable leak proof plug made of chemical-resistant, non-stick fluoropolymer resin TFE, these polypropylene stopcocks have serrated tubulations that accept 6.4mm to 9.5mm I.D. tubing. Pressure rating: 35psi.

Viton Tubing Assembly. Viton rubber tubing, 8mm diameter x 152cm length. For use with Unispense uP Dispensers (25485-003, -004). Designed for use with caustic reagents, organic solvents, and scintillation cocktails. Complete with glass and polypropylene fittings.

Viton Tubing Assembly. Viton rubber tubing, 6mm diameter x 152cm length. For use with Unispense uP Dispensers (25485-003, -004). Designed for use with caustic reagents, organic solvents, and scintillation cocktails. Complete with glass and polypropylene fittings.

Viton Tubing Assembly. Viton rubber tubing, 3mm diameter x 152cm length. For use with Unispense uP Dispensers (25485-003, -004). Designed for use with caustic reagents, organic solvents, and scintillation cocktails. Complete with glass and polypropylene fittings.

Accu-Punch 10.0Mm 50/Pk.

Stopcock, Straight or Multi-way Bore, BÃ¼rkle - 8608-0060