• 0
Shop Products $

Phase Separation Paper 1Bx.

CrossLab GC Fittings, Agilent Technologies - VLZT1C, Tee, Valco ¹/16 IN., 0.25 mm bore, stainless steel

Accessories for In-line Gas Purifiers, Agilent Technologies - UMC-5, Clip, trap mounting, universal 2 to 2¹/2 IN. Ext. Ø

CrossLab In-line Gas Purifiers, Agilent Technologies - UMC-5-2, Clip, trap mounting, universal 2 - 2½ IN. Ext.Ø

VHP Fittings, Agilent Technologies - UCP628, Luer adapter, female luer to ¹/4-28 FEM

ADAPTOR LUER FEMALE TOMALE TEFZEL 1/4IN - UCP624

VHP Fittings, Agilent Technologies - UCP316, Plug, PTFE, for ¹/4-28 flat bottom

XTRA LNG FNGRT PEEK 10-32 THRD(B) - UCF130

CrossLab Instrument Supplies for LC, Agilent Technologies - UCA102X, Filter frit, stainless steel, 0.5 µm, 0.062 IN. Int.Ø. × 0.250 IN. Ext.Ø.

PEEK Tubing, Agilent Technologies - UC1535, Red stripe

CrossLab In-line Gas Purifiers, Agilent Technologies - RMSH-4-SS, Big universal trap, ¹/4 IN.ch stainless steel fittings

CrossLab In-line Gas Purifiers, Agilent Technologies - RMSH-2-SS, Big universal trap, ¹/8 IN.ch stainless steel fittings

CrossLab In-line Gas Purifiers, Agilent Technologies - RMSA-2, 750 cc, Big universal trap, Argon, ¹/8 IN., 250 psig

Accessories for GC Capillary Columns, Agilent Technologies - RMP-5005, Microprobes, stainless steel, to remove septum and ferrule pieces in fittings

Fittings, Agilent Technologies - RFT-5300, Megabore ferrule tool, stainless steel, 0.53 mm, to remove ferrules stuck inside from fittings

FERRULE REMOVAL TOOL 0.25-0.32 MM - RFT-2500

CrossLab Tubing for HPLC, Agilent Technologies - RF0112T-6, Tubing, red, for V1P1-V2P6

CrossLab Tubing for HPLC, Agilent Technologies - RF0112T-50, Tubing, red, for V2P2

CrossLab Tubing for HPLC, Agilent Technologies - RF0112T-16, Tubing, red, V2P4

CrossLab Tubing for HPLC, Agilent Technologies - RF0112T-13, Tubing, red, V2P1

CrossLab Tubing for HPLC, Agilent Technologies - RF0110T-7, Tubing, beige, sipper tube for V1P3

CrossLab Tubing for HPLC, Agilent Technologies - RF0110T-3, Tubing, beige, loop, V1P2-V1P5

CrossLab Solvent Inlet Tubing and Filters for HPLC, Agilent Technologies - RF0089T, Filter for solvent

CrossLab Autosampler Needles and Plungers, Agilent Technologies - RF0050T, Sipper guide needle, blunt, 1.5 IN.

RHEFLEX 1-PIECE FINGERTIGHT PEEK -PK10 - RE6000282

FITTING RHEFLEX 1-PC PEEK PK10 - RE6000282MC

TUBING 12 FERRL+12 NUTS 1/16IN.OD PK1 - R0PTF20KIT

Crosslab Microsorb LC Preparative Columns, Agilent Technologies - R0086700D5

CARTRIDGE CVOUTLET 18BL 50100200ML TI - R007101417

CARTRIDGE CV INLET 18BL 50100ML TI - R007101416

CATRIDGE OUTLET CHECK VALVE 5/10/25ML - R007101409

CATRIDGE INLET CHECK VALVE 5/10/25ML - R007101408

MIXING SEAL RETAINER W FRIT TI 10U - R007000507

MIXER FILTER 2U 10 MM - R007000054

Guard Cartridge Holder, Agilent Technologies - PL1310-0016, Guard cartridge holder for 3.0×5 mm cartridges (PL)

Accessories for GPC Columns, Agilent Technologies - PL1310-0008, Tubing ferrules, ¹/16 IN. tube

Accessories for GPC Columns, Agilent Technologies - PL1310-0007, Column connecting nuts, ¹/16 IN. tube

Accessories for GPC Columns, Agilent Technologies - PL1310-0005, LDV intercolumn stainless steel connector

Accessories for GPC Columns, Agilent Technologies - PL1310-0003, Column end plugs, ¹/16 IN.

Crosslab PL aquagel-OH Analytical, Agilent Technologies - PL1120-6830, PL aquagel-OH 30

Crosslab PL aquagel-OH Analytical, Agilent Technologies - PL1120-6520, PL aquagel-OH

Thermal Desorption Supplies, Agilent Technologies - MKI-U-COV10, O-rings, 010 markes unity unity tube seals

REPLACEMENT GENIE MEMBRANE FILTERS 5/PK - HDW-2170

GLY-X VACUUM MANIFOLD SPACER PK2 - GX100

GLYCOSEP N GUARD COLUMN - GKI-4728G

GLYCOSEP R GUARD COLUMN - GKI-4727G

GLYKOCLEAN S-PLUS CARTRIDGE PK4 - GC210-4

Crosslab Source Lamps for UV-Vis and UV-Vis-NIR, Agilent Technologies - G9820-80000, Deuterium UV lamp, replacement UV source lamp for Cary 100/300 and Cary 400/500 UV instruments

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - G9321-60055, InfinityLab tube container, 36 tubes, 16×100 mm, ambient

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - G9321-60015, InfinityLab tube container, 10 tubes, 30×150 mm, ambient

STATOR + ROTOR FOR 7 PORT VALVE FOR AVS7 - G8495-60003

SPARE VALVE 7 PORT 2 POSITION FOR AVS7 - G8495-60000

Crosslab AVS 6/7 Supplies for ICP-OES, Agilent Technologies - G8494-60007, Reagent uptake capillary tube, with heavy PTFE sinker,1 mm Int. Ø , 1400 mm, for spectroscopy instruments: 5100; 5110; 7700; 7800; 7900; 8800; 5800; 5900; 8900; 4100; 4200; 4210; 700 series; Liberty; Vista series; 7850

STATOR + ROTOR FOR 6 PORT VALVE FOR AVS6 - G8494-60003

SPARE VALVE 6 PORT 2 POSITION FOR AVS6 - G8494-60000

O-RINGS FOR MSIS NEBULIZER BUSHING 1 PR - G8479-67000

Crosslab Deuterium Lamps, Agilent Technologies - G8431-80000, Replacement Deuterium UV source lamp for background corrector used in current and most previous AA instrument models

CrossLab ISIS 3 (Integrated Sample Introduction System) Supplies for ICP-MS (7800/7900/8900), Agilent Technologies - G8411-80121, ISIS 3 Stator, for 7 port, 2 position injection valve

CrossLab ISIS 3 (Integrated Sample Introduction System) Supplies for ICP-MS (7800/7900/8900), Agilent Technologies - G8411-67118, ISIS 3 Sample loop tubing, PFA, 2.18 mm int.Ø, ¹/8 IN. ext.Ø., 5 m length

CrossLab ISIS 3 (Integrated Sample Introduction System) Supplies for ICP-MS (7800/7900/8900), Agilent Technologies - G8411-67117, ISIS 3 Sample loop tubing, PFA, 1.0 mm int.Ø., ¹/16 IN. ext.Ø., 5 m length

CrossLab ISIS 3 (Integrated Sample Introduction System) Supplies for ICP-MS (7800/7900/8900), Agilent Technologies - G8411-67113, ISIS 3 injection valve assembly, 7 port, 2 position

CrossLab ISIS 3 (Integrated Sample Introduction System) Supplies for ICP-MS (7800/7900/8900), Agilent Technologies - G8411-67111, ISIS valve rotor seal replacement kit

SPILL TRAY KIT FOR SPS4 AUTOSAMPLER PK1 - G8410-80605

Crosslab O-Rings and Fittings for ICP-OES, Agilent Technologies - G8410-80124, Barb connector, for Agilent SPS 4 autosampler. 2.5 to 1.5 mm Int. Ø, Compatible with 4100; 4200; 4210; 5100; 5110; 5800; 5900; 7800; 7900; 8800; 8900; 240; 280; 55; 7850

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - G8410-80121, Replacement nipple, polypropylene, 2.5 mm int.Ø.

Crosslab O-Rings and Fittings for ICP-OES, Agilent Technologies - G8410-80120, Replacement nipple, PVDF, 5 mm Int. Ø,, for Agilent SPS 4 autosampler

CrossLab Other Tubing for ICP-OES, Agilent Technologies - G8410-20013, Tubing, Solvaflex, solvent-resistant, 0.187 IN. int.Ø., 0.312 mm ext.Ø., 2 m

CrossLab Other Tubing for ICP-OES, Agilent Technologies - G8410-20012, Tubing, Solvaflex, solvent resistant, 0.093 IN. int.Ø., 0.187 IN. ext.Ø., 2 m

CrossLab Skimmer Cones for ICP-MS, Agilent Technologies - G8400-67202, 7900, 8900 with x-lens ICP-MS skimmer cone, platinum-tip with nickel base. Optional cone used with x-lens for organic solvent analysis using Oxygen/Argon option gas

CrossLab Skimmer Cones for ICP-MS, Agilent Technologies - G8400-67201, 7900, 8900 with x-lens ICP-MS skimmer cone, platinum with copper base. Optional cone used with x-lens for aggressive acid digests, including HF

CrossLab Quartz Spray Chambers for ICP-MS, Agilent Technologies - G8400-67150, Quartz spray chamber, Scott double-pass

Crosslab Ion Lenses for ICP-MS, Agilent Technologies - G8400-67001, Extraction-Omega lens assembly for x-lens of Agilent 7900 ICP-MS

Crosslab RF Coils for ICP-MS, Agilent Technologies - G8400-60434, RF work coil assembly, for Agilent 7800, 7850, 7900 and 8900 ICP-MS

CrossLab Detectors for ICP-MS, Agilent Technologies - G8400-60258, Electron multiplier detector

CrossLab Argon Gas and Air Inlet Filters for ICP-OES, Agilent Technologies - G8020-68016, Replacement air inlet filter element

CrossLab Torches for 5100/5110 and 5800/5900 ICP-OES, Agilent Technologies - G8020-68005, Fully demountable Easy-fit torch with 1.8mm int.Ø. quartz injector for routine samples, dual view

Crosslab Injectors for Fully Demountable Torches, Agilent Technologies - G8020-60806, Quartz injector, tapered, ball joint, 1.4 mm Int.Ø for fully demountable torch. Compatible with 5100; 5110; 5800; 5900

CrossLab Outer Tube-Sets for Semi and Fully Demountable Torches, Agilent Technologies - G8016-60000, Quartz outer tubeset

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - G8014-68007, Drain connector, 10/32UNF to Luer Slip, for inert spray chamber (p/n G8014-68002)

CrossLab Outer Tube-Sets for Semi and Fully Demountable Torches, Agilent Technologies - G8014-60022, Quartz outer tubeset, for organic solvents

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - G8010-80043, Replacement Helix locking screw for ICP spray chamber

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - G8010-80036, UniFit drain connector, 2.0 mm ext.Ø. × 0.86 mm int.Ø., 480 mm length, for spray chamber used with Agilent 5000 Series ICP-OES, with 480 mm capillary tubing

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - G8010-80035, UniFit sample connector, 0.75 mm int.Ø., 1.3 mm ext.Ø., for U-Series SeaSpray concentric nebulizer used with Agilent 5000 Series ICP-OES

CrossLab RF Coils for ICP-OES, Agilent Technologies - G8010-68103, Gold work coil assembly for Agilent 5000 series ICP-OES

CrossLab Demountable Torch Supplies for 5100/5110 and 5800/5900 ICP-OES, Agilent Technologies - G8010-68021, Torch cleaning stand for 5000 series ICP-OES torches

CrossLab Pre-Optics Cone and Windows for ICP-OES, Agilent Technologies - G8010-68018, Replacement O-ring, 0.799 IN. int.Ø., 0.103 cross section, for axial view pre-optics window assembly, Agilent 5000 series ICP-OES

CrossLab Pre-Optics Cone and Windows for ICP-OES, Agilent Technologies - G8010-68015, Replacement glass, calcium fluoride, for radial view pre-optics window assembly, Agilent 5000 Series ICP-OES. Compatible with 5100; 5110; 5800; 5900

CrossLab Pre-Optics Cone and Windows for ICP-OES, Agilent Technologies - G8010-68014, Replacement glass, quartz, for axial view pre-optics window assembly, Agilent 5000 series ICP-OES. Compatible with 5100; 5110; 5800; 5900

AUTOSAMPLER PERIPUMP CONNECTION KIT PK1 - G8010-60348

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - G8010-60345, Sample inlet fitting, 0.5 mm int.Ø., 1.59 mm ext.Ø., 750 mm length, for OneNeb Series 2 nebulizer

SAMPLE LOOP FOR AVS 2.0ML VOLUME PK1 - G8010-60341

SAMPLE LOOP FOR AVS 0.5ML VOLUME PK1 - G8010-60339

SAMPLE LOOP FOR AVS 0.25ML VOLUME PK1 - G8010-60338

SAMPLE/RINSE CONNECTION KIT FOR AVS PK2 - G8010-60335

PUMP OUTLET CONNECTION KIT - G8010-60308

SUPER FLANGELESS 1PC FITTING 1/4-28 FLAT - G8010-60306

SAMPLE LOOP FOR AVS 1.0ML VOLUME PK1 - G8010-60305

SAMPLE INLET CONNECTION KIT - G8010-60303

CrossLab Spray Chambers for ICP-OES, Agilent Technologies - G8010-60271, ICP single-pass spray chamber, glass cyclonic design with ball joint socket and UniFit drain outlet, for Agilent 5000 series ICP-OES

CrossLab Nebulizers for ICP-OES, Agilent Technologies - G8010-60270, U-series concentric glass nebulizer (Conikal)

CrossLab Outer Tube-Sets for Semi and Fully Demountable Torches, Agilent Technologies - G8010-60264, Quartz outer tube set

CrossLab Torches for 5100/5110 and 5800/5900 ICP-OES, Agilent Technologies - G8010-60237, Easy-fit 1.4mm semi-demountable torch, quartz, for 5000 series RV (radial) ICP-OES

Crosslab Torches for 5100/5110 and 5800/5900 ICP-OES, Agilent Technologies - G8010-60236, Easy-fit 1.8 mm semi-demountable dual view quartz torch, with ball joint connection for 5000 series VDV/SVDV ICP-OES. Compatible with 5100; 5110; 5800; 5900

Crosslab Torches for 5100/5110 and 5800/5900 ICP-OES, Agilent Technologies - G8010-60232, Easy-fit 2.4 mm semi-demountable high solids dual view quartz torch, with ball joint connection for 5000 series VDV/SVDV ICP-OES. Compatible with 5100; 5110; 5800; 5900

Crosslab Torches for 5100/5110 and 5800/5900 ICP-OES, Agilent Technologies - G8010-60231, Easy-fit 1.8 mm inert semi-demountable dual view quartz torch, with ball joint connection, for 5000 Series VDV/SVDV ICP-OES. Compatible with 5100; 5110; 5800; 5900

CrossLab Argon Gas and Air Inlet Filters for ICP-OES, Agilent Technologies - G8010-60189, Replacement filter element for cooling air inlet. Suits the dusty environment air inlet filter option for 5100 and 5110

CrossLab Spray Chambers for MP-AES, Agilent Technologies - G8000-70007, Double-pass glass cyclonic spray chamber for Agilent MP-AES

CrossLab Nebulizers for MP-AES, Agilent Technologies - G8000-70004, Concentric nebulizer for Agilent MP-AES

CrossLab Torches for MP-AES, Agilent Technologies - G8000-70002, Easy-fit torch, quartz, for Agilent 4100 MP-AES

INLET COOLING AIR FILTER FOR MP-AES - G8000-68002

CrossLab Inert Spray Chambers for ICP-OES, Agilent Technologies - G8000-64140, Clamp for torch with ball joint socket used with MP-AES/ICP-OES

PRE-OPTIC WINDOW FOR AGILENT MP-AES - G8000-64112

THERMAL PAPER 57MMX13M 10 ROLLS PER PK - G7910-87002

CrossLab Sample Loops for HPLC, Agilent Technologies - G7167-68900, 900 µl, Sample loop kit

PM KIT F/1260 INFINITY II MULTILSAMPLER - G7167-68730, Preventive maintenance kit, includes needle assembly, high pressure needle seat, PEEK rotor seal

MULTIDRAW KIT 1290INFINITYII AUTOSAMPLER - G7167-68711, Multidraw kit, for 1290 Infinity II autosampler

KIT PM FOR 1290 INFINITY II MULTISAMPLER - G7167-68710, Preventive maintenance kit

TRIPLE-HEIGHT DRAWER KIT (3H) - G7167-60022

CrossLab Accessory Kits for HPLC, Agilent Technologies - G7167-60021, Single-height drawer kit (1H)

KIT DBL HEIGHT DRAWR 2H 1290 INFINITY II - G7167-60020, Double height drawer kit, 2H.

CrossLab Needle and Needle Seats for HPLC, Agilent Technologies - G7157-87201, Needle assembly, for G7157A preparative autosampler

CrossLab Needle and Needle Seats for HPLC, Agilent Technologies - G7157-87101, Needle seat, for G7157A preparative autosampler

CrossLab Sample Loops for HPLC, Agilent Technologies - G7157-60515, 900 µl, Sample loop

CrossLab Autosampler Needles and Plungers, Agilent Technologies - G7129-87202, Needle assembly

NEEDLE SEAT VESPEL 0.17MM ID CAPILLARY - G7129-87117, Needle seat, Vespel, 0.17 mm Int.Ø capillary, for 1290 Infinity II vial sampler

CrossLab Needle and Needle Seats for HPLC, Agilent Technologies - G7129-87112, Needle seat, Vespel, 0.12 mm Int.Ø capillary, for 1290 Infinity II vial sampler

KIT PM F/1290 INFINITY II VIALSAMPLR PK5 - G7129-68730, Preventive maintenance kit

CrossLab Sample Trays for HPLC, Agilent Technologies - G7129-68210, Drawer kit for 100×2 ml vials, classic style

SAMPLE LOOP SS 40 UL. - G7129-60400, 40 µl, Sample loop for Agilent 1260 and 1290 Infinity II Vialsampler

SAMPLE LOOP SS 20 UL. - G7129-60300, 20 µl, Sample loop for Agilent 1260 and 1290 Infinity II Vialsampler

CrossLab Sample Trays for HPLC, Agilent Technologies - G7129-60010, Drawer, for 66×2 ml vials

Crosslab Bottle Head Assemblies for HPLC, Agilent Technologies - G7122-60007, Bottle head assembly, GL 45, for 1260 and 1290 Infinity II systems

PM KIT FOR 1290 INFINITY BINARY PUMP - G7120-68741, Preventive maintenance kit

CrossLab Tools for HPLC, Agilent Technologies - G7120-68708, InfinityLab system tool kit, for Infinity II LC instruments

CrossLab Solvent Inlet Tubing and Filters for HPLC, Agilent Technologies - G7120-68070, Tubing Kit, Ultra Clean quality, recommended for MS applications

Crosslab Bottle Head Assemblies for HPLC, Agilent Technologies - G7120-60017, Bottle head assembly, GL 45, for 1260 and 1290 Infinity II systems, ultra clean tubing

CLAMP COLUMN HOLDER F/1290 INFINITY PK2 - G7116-68004, Column holder clamp

COLUMN HOLDER CLIPS (LAMELLA TYPE) PK2 - G7116-68003, Column holder clips (lamella type)

CrossLab Heat Exchanger for HPLC, Agilent Technologies - G7116-60061, InfinityLab Quick-Connect heat exchanger, 6 µl, large int.Ø., high flow, stainless steel

QUICK-CONNECT HEAT EXCHANGER LARGE ID - G7116-60051, InfinityLab Quick-Connect heat exchanger, 3 µl, for use with G7116A/B MCT, 0.17 mm Int. Ø

BIO-INERT QUICK-CONNECT HEAT EXCHANGER - G7116-60041, InfinityLab bio-inert Quick-Connect heat exchanger, without fittings, for multicolumn thermostat (G7116A/B)

QUICK-CONNECT HEAT EXCHANGER 0.075MM - G7116-60021, InfinityLab Quick-Connect heat exchanger, ultralow dispersion, 1 µl, 0.075 mm Int. Ø

CrossLab Column Thermostat Accessories for HPLC, Agilent Technologies - G7116-60013, Agilent Thermal Equilibration Device

CrossLab Heat Exchanger for HPLC, Agilent Technologies - G7116-60009, InfinityLab bio-inert Quick-Connect heat exchanger, PEEK, stainless-steel, with fittings, for multicolumn thermostat (G7116A/B)

INFINITYLAB PREVENTIVE MAINTENANCE KIT - G7104-68741, Preventive maintenance kit

CrossLab Upgrade Kits for HPLC, Agilent Technologies - G7104-68000, Inline filter upgrade kit, for quaternary pump

AGILENT CE SYSTEM ACCESSORY KIT - G7100-68705

260NM DETECTOR FILTER ASSEMBLY - G7100-62700

ALIGNMENT INTERFACE MS - G7100-60400

ALIGNMENT INTERFACE FOR EXT CAP 75UM ID - G7100-60330

ALIGNMENT INTERFACE 75UMX1 - G7100-60310

CrossLab Alignment Interfaces, Agilent Technologies - G7100-60230, Alignment interface for extended capillary 0.05 mm int.Ø. for G7100 Capillary Electrophoresis

CrossLab Alignment Interfaces, Agilent Technologies - G7100-60210, Alignment interface for standard capillary 0.05 mm int.Ø. for G7100 Capillary Electrophoresis

ELECTRODE ASSY SHORT FOR G7100 ONLY - G7100-60033

ELECTRODE ASSEMBLY STANDARD - G7100-60007

Alignment Interfaces and Cassettes, Agilent Technologies - G7100-60002, Capillary cassette for G7100 capillary electrophoresis

GC/MS TOOL KIT AND CLEANING SUPPLIES - G7077-60566

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G7002-80103, Electron multiplier, for 7000C; 7010; 7000D

REPELLER ASSEMBLY SERVICE - G7002-67057

SCREW M2X6 PAN HEAD TORX GOLD-PLATED - G7002-20109

CREST CUP M2-0.4 X 12MM LONG GOLD-PLATED - G7002-20083

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G7002-20074, Lens insulator, enhanced, for Agilent 7010 Triple Quadrupole GC/MS

CrossLab Instrument Supplies for GC/MS, Agilent Technologies - G7002-20064, Extractor spacer lens, aluminum nitride, for Agilent 7010 Triple Quadrupole GC/MS

ENTRANCE LENS ASSEMBLY EXTENDED - G7000-20026

SAMPLE HOLDER 1IN CARY7000 UMS/UMA PK2 - G6876-60003

SAMPLE HOLDER 8IN ROUND CARY7000 UMS/UMA - G6876-60002

ADM REPLACEMENT CARTRIDGE MADE TO ORDER - G6692E

ADM FLOW METER MADE TO ORDER - G6691E

Nitrogen Chemiluminescence Detector Supplies, Agilent Technologies - G6600-80063, Dual plasma quartz tube for NCD

O-RING 1301 INCH ID SIZE 2-027 BLACK - G6600-80051

O-RING 1614 INCH ID SIZE 2-030 - G6600-80050

Nitrogen Chemiluminescence Detector Supplies, Agilent Technologies - G6600-80045, Replacement odor filtration element

Sulfur Chemiluminescence Detector Supplies, Agilent Technologies - G6600-80044, Replacement oil coalescing filter

CrossLab Nitrogen Chemiluminescence Detector Supplies for GC, Agilent Technologies - G6600-80043, Oil mist filter for RV5 pump

REPLACEMENT OIL COALESCING FILTER - G6600-80042

CrossLab Nitrogen Chemiluminescence Detector Supplies for GC, Agilent Technologies - G6600-80018, Spare column nut and ferrule kit

12 MONTH PM KIT DRY PISTON PUMP FOR XCD - G6600-67008

Nitrogen Chemiluminescence Detector Supplies, Agilent Technologies - G6600-60038, Dual plasma burner accessory kit, NCD

Sulfur Chemiluminescence Detector Supplies, Agilent Technologies - G6600-60037, Dual Plasma burner accessory kit, SCD

Sulfur Chemiluminescence Detector Supplies, Agilent Technologies - G6600-60035, Ceramic tube package, SCD and NCD

NEEDLE SEAT 0.17 MM ID CAPILLARY - G5668-87017, Needle seat, 0.17 mm Int.Ø. capillary, for G5668A for 1260 Infinity II Series Bio-inert Multisampler. Compatible with needle assembly G5668-87200

NEEDLE ASSEMBLY BIO-INERT - G5667-87200, Needle assembly, ceramic, Bio-inert, for G5667A Bio-inert high performance autosampler. Compatible with needle seat G5667-81008

NEEDLE SEAT BIO-INERT 0.17MM CAPILLARY - G5667-81008, Needle seat, Bio-inert, 0.17 mm Int.Ø capillary, for G5667A Bio-inert high performance autosampler. Compatible with needle assembly G5667-87200

CAPILLARY PEEK SS CLAD 0.17 X 500 MM - G5667-81005, Standard capillary, RLO/RLO, non-swaged/non-swaged

CAPILLARY PEEK SS CLAD 0.17 X 400 MM - G5667-81004, Standard capillary, RLO/RLO, non-swaged/non-swaged

CAPILLARY PEEK SS CLAD 0.17 X 300 MM - G5667-81003, Standard capillary, RLO/RLO, non-swaged/non-swaged

CAPILLARY PEEK SS CLAD 0.17 X 150 MM - G5667-81001, Standard capillary, RLO/RLO, non-swaged/non-swaged

PREVENTATIVEMAINTENANCE KIT - G5667-68735, Preventative maintenance kit

PM KIT FOR BIO-INERT QUATERNARY PUMP - G5611-68741, Preventive maintenance kit

OUTLET VALVE BIO-INERT 600BAR BALL VALVE - G5611-60067, Outlet valve, Bio-inert, 600 bar outlet ball valve

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - G5611-60064, Purg valve, Bio inert, short

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - G5611-60062, Purg valve, Bio inert, long

CARTRIDGE BIO-INERT ACTIVE INLET VALVE - G5611-60020, Cartridge for Bio-inert active inlet valve G5611-60025, 600 bar

INTUVO SWAGED HES MS TAIL - G4590-60109

Intuvo Flow Chips, Agilent Technologies - G4590-60009, Flow chip, Intuvo, swaged MS tail

INTUVO MID COLUMN BACKFLUSH TO D2 CHIP - G4588-60721

INTUVO MID COLUMN BACKFLUSH TO D1 CHIP - G4588-60701

INTUVO INLET SPLITTER CHIP - G4588-60601

INTUVO D1-MS SPLITTER CHIP 1:1 - G4588-60502

INTUVO D1-D2 SPLITTER CHIP 1:1 - G4588-60402

INTUVO D2-MS POST COLUMN BACKFLUSH CHIP - G4588-60322

INTUVO D1 POST COLUMN BACKFLUSH CHIP - G4588-60302

INTUVO MMI JUMPER CHIP - G4587-60675

Intuvo Guard Chips, Agilent Technologies - G4587-60665, Guard chip, Intuvo, multimode inlet

Intuvo Guard Chips, Agilent Technologies - G4587-60575, Jumper Chip, Intuvo, split/splitless inlet

MMI COMPRESSION BOLT - G4586-20027

INTUVO D2 CONNECTOR CHIP - G4583-60621

INTUVO XCD TAIL - G4583-60336

INTUVO FPD TAIL - G4583-60335

INTUVO ECD TAIL - G4583-60333

Intuvo Flow Chips, Agilent Technologies - G4583-60331, Flow chip, Intuvo, FID-TCD tail

DETECTOR TAIL COMPRESSION BOLT - G4583-20005

COMPRESSION BOLT INTUVO - G4581-60260

Intuvo Flow Chips, Agilent Technologies - G4581-60033, Flow chip, Intuvo, D2-MS

Intuvo Flow Chips, Agilent Technologies - G4581-60032, Flow chip, Intuvo, D1

Intuvo Flow Chips, Agilent Technologies - G4581-60031, Flow chip, Intuvo, inlet

TORQUE DRIVER EXTENSION - G4581-20522

COMPRESSION BOLT GUARD CHIP - G4581-20006

INTUVO EXHAUST KIT - G4580-68300

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - G4556-80126, Sample loop, headspace, 1.00 ml, stainless steel, inert, certified

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - G4556-80108, Sample loop, headspace, 3.00 ml, stainless steel, inert

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - G4556-80106, Sample loop, headspace, 1.00 ml, stainless steel, inert

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - G4556-80105, Sample loop, headspace, 0.50 ml, stainless steel, inert

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - G4556-67010, Leak test kit (ferrule - no hole, plug ¹/8 IN. tube fitting, nylon, headspace leak test vial, plug ¹/16 IN. ZDV stainless steel male, 11 mm low bleed septa)

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - G4556-60019, 7697A Tray rack

VIAL RACK KIT 3 RACKS 3 WHITE LABELS - G4514-67505

GRIPPER FINGER CAPS FOR 7693 PK16 - G4514-60710

NEEDLE SUPPORT INSERT ON-COLUMN 7693 - G4513-40529

INJECTOR MOUNTING POST 7650 7683/93 - G4513-20561

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - G4302-60066, Inlet valve for SFC pump

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - G4301-60250, Pump seal, Aurora SFC Fusion A5 unit, for use with Agilent 1260 Infinity SFC

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - G4301-60210, Check valve cartridge, SFC

Instrument Supplies for LC/MS, Agilent Technologies - G4296-68715, Compact tool kit

CrossLab Maintenance Kits for HPLC, Agilent Technologies - G4280-68770, Preventive maintenance kit for1220 LC System with automated injector

CrossLab Maintenance Kits for HPLC, Agilent Technologies - G4280-68730, Preventive maintenance kit for 1120 LC System with automated injector

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - G4280-60029, Solvent selection valve

CrossLab Autosampler Needles and Plungers, Agilent Technologies - G4277-80125, Replacement needle kit; includes 1 nut and 3 removable needles, for 100 µl Dynamic Load and Wash syringes

Crosslab Manual Syringes, Agilent Technologies - G4277-80120, Syringe, dynamic load and wash syringe with removable needle design (needle not included) for 1290 Infinity LC HTS injector

CrossLab Needle and Needle Seats for HPLC, Agilent Technologies - G4267-87210, Needle assembly, slotted, for G7167 multisampler, 900 µl

NEEDLE SEAT HIGH PRESSURE 0.12MM PEEK - G4267-87012, Needle seat, PEEK, for G7167A, G7167B. Compatible with needle assembly G4267-87201, G4267-87210, G4267-87020

SAMPLE LOOP KIT STAINLESS STEEL 100 UL - G4267-60500, 100 µl, Sample loop kit for G7167A/B multisampler, dual needle option, single needle option

SAMPLE LOOP KIT STAINLESS STEEL 40 UL - G4267-60400, 40 µl, Sample loop kit for G7167A/B multisampler, dual needle option, single needle option

CrossLab Needle and Needle Seats for HPLC, Agilent Technologies - G4226-87211, Needle assembly, µltra low dispersion, for G1367E well plate sampler

KIT PM F/HIGH PERFORMANCE SAMPLER G4226A - G4226-68735, Preventive maintenance kit

CrossLab Maintenance Kits for HPLC, Agilent Technologies - G4226-67001, Door repair kit for 1290 Infinity High Performance Autosampler

SAMPLE LOOP KIT PEEK-LINED SS 40 UL. - G4226-60415, 40 µl, Sample loop kit for G5667A Bio-inert high performance autosampler

SAMPLE LOOP KIT SS 20 UL. - G4226-60310, 20 µl, Sample loop kit for G1367E, G4226A high performance autosampler

CAPILLARY SS 0.17MM ID 160MM - G4226-60301, Standard capillary, S/SL, pre-swaged/pre-swaged

CAPILLARY SS 0.17 X 275MM S/SH PS/PS - G4220-87000, Special capillary, S/S, pre-swaged/pre-swaged

SEAL WASH PREVENTIVEMAINTENANCE KIT - G4220-68742, Seal Wash Preventive maintenance kit

CrossLab Maintenance Kits for HPLC, Agilent Technologies - G4220-68741, Preventive maintenance kit for 1290 Infinity LC Binary pump

CrossLab Solvent Bottles and Waste Cans for HPLC, Agilent Technologies - G4220-68070, Tubing Kit, Ultra Clean quality, recommended for MS applications

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - G4220-60128, Outlet valve, type N, for normal phase applications, 1300 bar

CrossLab Tubing Kits for HPLC, Agilent Technologies - G4220-60035, Tubing kit, 140 mm

BOTTLE HEAD ASSEMBLY ULTRA CLEAN TUBING - G4220-60017, Bottle head assembly for 1260 and 1290 Infinity II systems, ultra clean tubing, GL45

CrossLab Outer Tube-Sets for Semi and Fully Demountable Torches, Agilent Technologies - G4220-60016, Seal holder

CrossLab Tools for HPLC, Agilent Technologies - G4220-20041, Torx bit, 10×25 mm

CrossLab Tools for HPLC, Agilent Technologies - G4220-20013, Hex bit, 4 mm, 89 mm length

CrossLab Pump and Maintenance Kits for HPLC, Agilent Technologies - G4220-20001, Spacer fitting

CrossLab Sampler and Maintenance Kits for HPLC, Agilent Technologies - G4216-68711, Large volume injection kit, for G4226A, 1290 Infinity LC system

Crosslab Detector Kits for HPLC, Agilent Technologies - G4212-68001, Inline pressure relief valve kit, for G4220A/B DAD detectors

PRESSURE RELIEF VALVE - G4212-60022, Pressure relief valve

LOW PRESSUREMIXER ASSEMBLY - G4204-81090, Low pressure stainless steel mixer assembly for Agilent 1290 Infinity Quaternary Pump

CrossLab Maintenance Kits for HPLC, Agilent Technologies - G4204-68741, Preventive maintenance kit for 1290 Infinity LC Quaternary pump G4204A

FILTER OUTLET PUMP HEAD 4.6MM ID 5UM. - G4204-60004, Filter, stainless steel, outlet, pump head, 4.6 mm Int.Ø., 5 µm, for Infinity quaternary pump

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G3870-20530, Insulator, extraction lens, for 5977; 7000C

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G3870-20449, Lens. extraction, 9 mm, for 5977; 7000C

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G3870-20448, Lens, extraction, 6 mm, for 5977; 7000C

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G3870-20445, Insulator, extraction lens ring, for 5977; 7000C

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G3870-20444, Lens, extraction, 3 mm, for 5977; 7000C

Crosslab Packed GC Columns, Agilent Technologies - G3591-81158, Hayesep D 80/100 Ultimetal, 2 m

Crosslab Packed GC Columns, Agilent Technologies - G3591-81012, J&W GC packed column in UltiMetal tubing, length 4' (1.22 m), 1/8 IN. Out.Ø, 2 mm Int.Ø, MolSieve 13X packing, mesh size 45/60, pre-conditioned

Crosslab Packed GC Columns, Agilent Technologies - G3591-80013, J&W GC packed column in stainless steel tubing, length 6' (1.83 m), 1/8 IN. Out.Ø, 2 mm Int.Ø, Porapak Q packing, mesh size 80/100, pre-conditioned

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - G3520-20210, Transfer line nut fitting for G3520A transfer line interface accessory

Multimode Inlet Supplies, Agilent Technologies - G3510-60820, Multi Mode Inlet Cleaning Kit

CrossLab Column Nuts for GC, Agilent Technologies - G3510-20018, Column nut adapter, graphite

INSERT WELDMENT ASSEMBLY VALVE 7890 - G3480-67585

14-PORT ACTUATOR LIMITER (FOR LVO ONLY) - G3480-20002

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - G3452-60835, Septum retainer nut for transfer line

CAPILLARY INSERT WELDMENT INERT F/7890GC - G3452-60586

CAPILLARY INLET SHELL WELDMENT INERT - G3452-60570

RENEWABLE GAS PURIFIER - SYSTEM MANUAL - G3440-90001

RENEWABLE GAS PURIFIER CARTRIDGE MANUAL - G3440-90000

OVEN LEFT SIDE NUT PLATE ASSEMBLY(8 POS) - G3440-81665

CFT METAL COLUMN PRE-SWAGING TOOL FOR GC - G3440-80247

Column Installation Pre-Swaging Tools, Agilent Technologies - G3440-80227, GC column installation pre-swaging tool, for ultiMetal Plus Flexible Metal ferrules into Capillary Flow Technology devices

Column Installation Pre-Swaging Tools, Agilent Technologies - G3440-80218, GC column installation pre-swaging tool, for metal ferrules

Column Installation Pre-Swaging Tools, Agilent Technologies - G3440-80217, GC column installation pre-swaging tool, for graphite ferrules

RENEWABLE GAS PURIFIER - BASE ONLY - G3440-80007

Accessories for Renewable Gas Purification System, Agilent Technologies - G3440-69003, Renewable gas purifier system - recycled cartridge

Renewable Gas Purification System, Agilent Technologies - G3440-60004, Renewable gas purifier system - startup kit

Accessories for Renewable Gas Purification System, Agilent Technologies - G3440-60003, Renewable gas purifier system - new cartridge

CrossLab Instrument Supplies for GC/MS, Agilent Technologies - G3440-20022, Drawout plate, 9.0 mm, inert, Inconel

HASTELLOY SAMPLE LOOP 100UL - G3440-20004

FPD+ DUAL PM KIT - G3436-67000

GAS ADAPTER 7890 GC MICRO ECD MAKE-UP - G3433-63100

DETECTOR ASSEMBLY COMPLETE ORIGINAL EPC - G3432-60220

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - G3431-60680, FID igniter cable, universally compatible

CRYOGENIC VALVE LIQUID N2 - G3430-60018

Accessories for Gas Leak Detector, Agilent Technologies - G3388-80002, Replacement reference port filter, for G3388 gas leak detector

Accessories for Gas Leak Detector, Agilent Technologies - G3388-80001, Replacement sample probe filter, for G3388 gas leak detector

AIR FILTER FOR CHILLER G3292A PSC 6106T - G3292-80112

CrossLab Speciation Columns for ICP-MS, Agilent Technologies - G3288-80000, Speciation column for testing arsenic in urine, food, etc. by HPLC-ICP-MS

CrossLab Autosampler Probes, Agilent Technologies - G3286-80119, Sample probe, blue band, carbon fiber, 1.0 mm int.Ø. (2 blue bands), for ASX 500 autosampler

CrossLab Tubing Kits for ICP-OES, Agilent Technologies - G3286-80118, Tubing and connector kit, drain pump, Tygon, Agilent ASX-500 series autosampler

CrossLab Tubing Kits for ICP-OES, Agilent Technologies - G3286-80117, Tubing hook-up kit, rinse/drain, Agilent ASX-500 series autosampler, ³/16 IN. Int.Ø, 72 IN., ¹/8 IN. Int.Ø, 84 IN.

CrossLab Autosampler Probes, Agilent Technologies - G3286-80112, Standard carbon fiber sample probe, carbon fibre

CrossLab Autosampler Probes, Agilent Technologies - G3286-80110, Standard carbon fiber sample probe, carbon fibre

CrossLab Sample Racks and Overlays, Agilent Technologies - G3286-80106, Sample rack, holds 14 ml, 16 mm ext. Ø. vials, 60 positions

CrossLab Sample Racks and Overlays, Agilent Technologies - G3286-80103, Sample rack for 30 mm od tubes, 21 positions, holds 50 ml vials, Agilent ASX-500 series autosampler

CrossLab Autosampler Probes, Agilent Technologies - G3286-80102, Sample probe, carbon fibre

SAMPLE PROBE03MM ID FOR ASX-500 SERIES - G3286-80101

CrossLab Autosampler Probes, Agilent Technologies - G3286-80100, Sample probe, red band, 0.8 mm int.Ø., Agilent ASX-500 series autosampler, red band

O-RINGS FOR INJECTOR INERT TORCH 10/PK - G3285-80085

LONG CONNECTOR TUBE FOR ICP-MS INERT KIT - G3285-80024

CONNECTOR TUBE FOR INERT KIT NO PORT - G3285-80023

SPRAY CHAMBER FOR INERT SPL INTRO PFA - G3285-80021

END CAP FOR INERT KITPFA - G3285-80020

PFA CONCENTRIC NEB(50UL/MIN W/PROBE) - G3285-80003

PFA CONCENTRIC NEBULIZER (50UL/MIN) - G3285-80002

PFA CONCENTRIC NEB (200UL/MIN W/PROBE) - G3285-80001

PFA CONCENTRIC NEBULIZER (200UL/MIN) - G3285-80000

SINGLE PASS S/CHAMBER FOR CAPILLARY LC - G3280-80603

TOTAL CONSUMPTION NEB FOR CAPILLARY LC - G3280-80602

CrossLab Torches for ICP-MS, Agilent Technologies - G3280-80081, Quartz Torch, single-piece, 1.0 mm int.Ø. tapered injector, for volatile organic solvent analysis with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS.

Crosslab Torches for ICP-MS, Agilent Technologies - G3280-80080, Quartz Torch, single-piece, with ball joint connection, 1.5 mm Int. Ø tapered injector, for organic solvent analysis with Agilent 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS

CrossLab Quartz Spray Chambers for ICP-MS, Agilent Technologies - G3280-80008, Quartz spray chamber, Scott double-pass

CrossLab Skimmer Bases for ICP-MS, Agilent Technologies - G3280-67066, 7700, 7900, 8800 with s-lens ICP-MS skimmer cone, Nickel. Optional cone used with s-lens for routine applications and economical operation.

CrossLab Skimmer Bases for ICP-MS, Agilent Technologies - G3280-67063, 7700, 7800, 7850 and 8800 with x-lens ICP-MS skimmer cone, Platinum-tip with nickel base. Optional cone used with x-lens for organic solvent analysis using Oxygen/Argon option gas.

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G3280-67062, T-joint with earth block, Agilent 7700/8000 series ICP-MS. Used to mix internal standard (ISTD) with sample online and ground connection to prevent any electrostic charge effects

CrossLab Skimmer Cones for ICP-MS, Agilent Technologies - G3280-67060, 7700, 7800, 7850 and 8800 with x-lens ICP-MS skimmer cone, platinum-tip with copper base. Optional cone used with x-lens for aggressive acid digests

Crosslab ORS (Octopole Reaction System) Supplies for ICP-MS, Agilent Technologies - G3280-67045, ORS octopole assembly for Agilent 7700, 8800 ICP-MS. Compatible with 7700; 8800

Crosslab Ion Lenses for ICP-MS, Agilent Technologies - G3280-67039, Extraction-Omega lens assembly for x-lens of Agilent 7700x/e, 7800, 7850 and 8800 ICP-MS

CrossLab Ion Lenses for ICP-MS, Agilent Technologies - G3280-67038, Screw and spacer kit for s-lens of Agilent 7700, 7900 and 8800 Semiconductor ICP-MS

Crosslab Ion Lenses for ICP-MS, Agilent Technologies - G3280-67037, Screw and spacer kit for x-lens of Agilent 7700x/e, 7800, 7850 and 8800 ICP-MS

CrossLab Ion Lenses for ICP-MS, Agilent Technologies - G3280-67035, Extraction-Omega lens assembly for s-lens of 7700 and 8800 Semiconductor ICP-MS

CrossLab Gas Tubing for ICP-MS, Agilent Technologies - G3280-67023, Tubing for plasma and auxiliary gas inside torch box, black with inner sleeve, 1pc tubing for each. Suitable for 7700/8800 ICP-MS.

CrossLab Gas Tubing for ICP-MS, Agilent Technologies - G3280-67022, Tubing for external carrier, makeup and dilution gas, 1pc tubing for each. Suitable for 7700, 7800, 7850, 7900, 8800, 8900 ICP-MS.

Crosslab Peristaltic Pump Tubing for ICP-MS, Agilent Technologies - G3280-67008, Peristaltic pump tubing, for internal standard (ISTD) uptake, Flared end PVC Tygon®, 2-stop, orange/red tabs, 0.19 mm Int. Ø, Compatible with 7500

CrossLab RF Coils for ICP-MS, Agilent Technologies - G3280-60638, RF work coil assembly, for Agilent 7700 and 8800 ICP-MS

CrossLab Skimmer Bases for ICP-MS, Agilent Technologies - G3280-60621, Skimmer base, brass, for x-lens, optional for Agilent 7700x/e, 7800, 7850 and 8800 ICP-MS with Pt-tipped cones

CrossLab Ion Lenses for ICP-MS, Agilent Technologies - G3280-60612, Extraction lens 1 for x-lens of Agilent 7700x/e, 7800, 7850 and 8800 ICP-MS

CrossLab Skimmer Bases for ICP-MS, Agilent Technologies - G3280-60608, Skimmer base, stainless steel, for x-lens, for Agilent 7700x/e, 7800, 7850 and 8800 ICP-MS

CrossLab ICP-MS Calibration Standards, Agilent Technologies - G3280-60590, Online internal standard (ISTD) addition kit for ICP-MS

CrossLab Drain Tubing for ICP-MS, Agilent Technologies - G3280-60555, Spray chamber drain tube assembly for Quartz Scott double-pass

CrossLab Interface Cone Supplies for ICP-MS, Agilent Technologies - G3280-60502, Interface wrench for skimmer cone for Agilent ICP-MS

CrossLab Drain Tubing for ICP-MS, Agilent Technologies - G3280-60077, Drain Tubing for aqueous waste, PVC Tygon®, 3 mm int.Ø., 6 mm ext.Ø., 3 m length per unit

CrossLab Spray Chamber End Caps for ICP-MS, Agilent Technologies - G3280-60008, End cap for Scott spray chamber. Compatible with 7700; 7800; 7900; 8800; 8900; 7850

CrossLab Instrument Parts for ICP-MS, Agilent Technologies - G3280-20504, Retaining ring for sampling cone, Agilent 77/78/79/88/8900 series ICP-MS

CrossLab Torches for ICP-MS, Agilent Technologies - G3270-80043, Quartz Torch, single-piece, 2.5 mm int.Ø. injector, standard for Agilent 7500 ICP-MS.

CrossLab Connector Tubes from Spray Chamber to Torch for ICP-MS, Agilent Technologies - G3270-80025, Quartz connector from spray chamber to torch, without gas port

CrossLab Connector Tubes from Spray Chamber to Torch for ICP-MS, Agilent Technologies - G3270-80024, Quartz connector from spray chamber to torch with dilution port for high matrix introduction (HMI)

CrossLab Gas Tubing for ICP-MS, Agilent Technologies - G3270-65035, ORS cell gas tubing, stainless steel, ¹/8 IN. Ext.Ø., 6 m, for 7700; 7800; 7900; 8800; 8900; all Agilent ICP-MS systems; 7500; 7850

Accessories for 7500/7700, Agilent Technologies - G3270-65024, Skimmer cone for 7500 CE/CX

CrossLab Nebulizer Supplies for ICP-OES, Agilent Technologies - G3266-80020, Nebulizer cleaner

CrossLab Nebulizer Supplies for ICP-OES, Agilent Technologies - G3266-80015, EzyLok gas connector for carrier gas, suits 4 mm ext. Ø. gas inlet tubing, suits most concentric nebulizers

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G3266-80013, Sample uptake tube and connector, UniFit, 0.25 mm int.Ø., with 0.25 mm int.Ø. × 700 mm capillary, for U-Series MicroMist concentric nebulizer

CrossLab Nebulizer Supplies for ICP-OES, Agilent Technologies - G3266-80012, Sample uptake tube and connector, UniFit, 0.5 mm int.Ø., with 0.5 mm int.Ø. × 700 mm capillary, for U-Series MicroMist concentric nebulizer

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G3266-80011, Sample uptake tube and connector, EzyFit, 0.5 mm int.Ø., 700 mm capillary, for MicroMist concentric nebulizer

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G3266-80010, Sample uptake tube and connector, EzyFit, 0.25 mm int.Ø., 700 mm capillary, for MicroMist concentric nebulizer

CrossLab Nebulizers for ICP-MS, Agilent Technologies - G3266-80005, Nebulizer, MicroMist, concentric, borosilicate glass, U-series with UniFit sample connector and threaded direct connection gas line, standard with Agilent 8900 Series ICP-MS

Crosslab Flexible Metal Ferrules for GC, Agilent Technologies - G3188-27506, Flexible stainless steel capillary ferrule, 0.8 mm Int.Ø, UltiMetal Plus, for 0.53 mm Int.Ø UltiMetal column tubing, maximum 400 °C

Crosslab Flexible Metal Ferrules for GC, Agilent Technologies - G3188-27505, Flexible stainless steel capillary ferrule, 0.6 mm Int.Ø, UltiMetal Plus, for 0.25 and 0.32 mm Int.Ø UltiMetal column tubing, maximum 400 °C

CrossLab Flexible Metal Ferrules for GC, Agilent Technologies - G3188-27504, Flexible metal ferrule, UltiMetal Plus, without hole, to plug capillary flow technology fittings, stainless steel, max. 400 °C

Capillary Flow Technology Supplies, Agilent Technologies - G3184-60065, Tee, inert, for capillary flow technology

Ultimate Union, Agilent Technologies - G3182-61580, Ultimate union kit, deactivated

Ultimate Union, Agilent Technologies - G3182-60581, Union, Ultra Inert, no fittings

CrossLab GC/MS supplies, Agilent Technologies - G3170-80105, Detector assembly, triple-axis, ceramic

CrossLab Vacuum Pump Supplies for GC/MS, Agilent Technologies - G3170-80006, Foreline pump exhaust fitting

CrossLab Instrument Supplies for GC/MS, Agilent Technologies - G3170-80002, Calibrant Bulb

CrossLab Instrument Supplies for GC/MS, Agilent Technologies - G3170-60172, Repeller assembly, EI 350, stainless steel, for Agilent 5975C MSD

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G3163-20530, Drawout Plate, 6 mm, for Agilent 5973/75, 5977

CrossLab Nebulizers for ICP-MS, Agilent Technologies - G3161-80001, Nebulizer, Mira Mist, parallel path, PEEK, for high TDS applications, suitable for all Agilent ICP-MS series

CrossLab Integrated Autosampler (I-AS) Supplies for ICP-MS, Agilent Technologies - G3160-65315, Vial, PE, 2 ml, 12 mm Ext.Ø, 24.5 mm tall, conical base, for Agilent integrated autosampler (I-AS) tray type D (89-position)

CrossLab Integrated Autosampler (I-AS) Supplies for ICP-MS, Agilent Technologies - G3160-65307, Rinse bottle, external, 100 ml, with caps

CrossLab Autosampler Needles and Plungers, Agilent Technologies - G3160-65306, I-AS autosampler needle, standard probe, PFA, 0.3 mm Int.Ø

CrossLab Integrated Autosampler (I-AS) Supplies for ICP-MS, Agilent Technologies - G3160-65305, Vial, PP, 50 ml, 41 mm Ext.Ø, 41.5 mm tall, for Agilent integrated autosampler (I-AS) tray type C (18-position)

TORCH GC/ICP-MS INTERFACE - G3158-80074

CrossLab Speciation Columns for ICP-MS, Agilent Technologies - G3154-65002, Guard Column for arsenic Speciation

CrossLab Nebulizers for ICP-MS, Agilent Technologies - G3139-65102, Nebulizer, MicroFlow, concentric, inert PFA, threaded connector, with Agilent I-AS probe, self-aspirates at 200 µl/min, standard on Agilent ICPMS with s-lens (semicon) and I-AS

CrossLab Nebulizers for ICP-MS, Agilent Technologies - G3139-65100, Nebulizer, MicroFlow, concentric, inert PFA, self-aspirates at 200 µl/min, standard on Agilent ICPMS with s-lens (semicon)

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G3138-65129, Plug for cross joint

CrossLab ISIS (Integrated Sample Introduction System) Supplies for ICP-MS (7700/8800), Agilent Technologies - G3138-65119, ISIS ferrule for valve. Suitable for ISIS used with Agilent 7700 and 8800 ICP-MS

CrossLab ISIS (Integrated Sample Introduction System) Supplies for ICP-MS (7700/8800), Agilent Technologies - G3138-65117, ISIS Rotor seal for valve

Capillary Flow Technology Supplies, Agilent Technologies - G2855-60570, Plug for microfluidic manifold or unions

Capillary Flow Technology Supplies, Agilent Technologies - G2855-60200, Ferrule Pre-Swage tool, capillary flow

CrossLab Flexible Metal Ferrules for GC, Agilent Technologies - G2855-28501, CFT capillary ferrule Flex Gold, column int.Ø up to 0.25 mm, stainless steel, max. 400 °C

Capillary Flow Technology Supplies, Agilent Technologies - G2855-20590, Column storage fitting

Ultimate Union, Agilent Technologies - G2855-20555, Swaging nut, ultimate union and QuickSwap

Capillary Flow Technology Supplies, Agilent Technologies - G2855-20532, Internal nut for ¹/6 IN. stainless steel capillary flow technology fitting

PTV COL ADAPTER TUBE - G2617-80550

PTV SEPTUMLESS HEAD 6890 - G2617-60507

INERT SOURCE WASHER - G2589-20101

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G2589-20100, Drawout plate, 3 mm, for inert source, for 5973; 5975; 5977; 7000A; 7000B

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G2589-20043, Ion source body, for Agilent 5973/75, 5977 Inert MSD

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G2571-80103, Electron multiplier horn, high gain

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G2428A, APCI nebulizer needle

API-ES NEBULIZER NEEDLE - G2427A

CrossLab Electron Capture Detector (ECD) for GC, Agilent Technologies - G2397-80520, ECD make-up gas adapter, for 6850/6890 GC

DISCHARGE TUBE KIT - G2350-61090

CrossLab Capillaries for HPLC, Agilent Technologies - G2260-87301, Standard capillary, S/S, non-swaged/non-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - G2260-87300, Standard capillary, SX/S, non-swaged/non-swaged

NEEDLE ASSEMBLY F/G2260-87101 NEEDL SEAT - G2260-87201, Needle assembly, stainless steel, for for G2260A preparative autosampler. Compatible with needle seat G2260-87101

NEEDLE SEAT 0.5 MM ID CAPILLARY 20 UL - G2260-87101, Needle seat, 0.5 mm Int.Ø capillary, 20 µl, for G2260A preparative autosampler. Compatible with needle assembly G2260-87201

CrossLab Tubing for HPLC, Agilent Technologies - G2258-87316, Front seat tube

CrossLab Tubing for HPLC, Agilent Technologies - G2258-87315, Back seat tube, 24 µl

BACK SEAT TUBE PTFE 025MM ID 12 CM LONG - G2258-87313

FRONT SEAT TUBE PTFE 025MM ID 10CM LONG - G2258-87312

WASTE TUBE 08 MM ID 15 CM LONG - G2258-87310

CrossLab Capillaries for HPLC, Agilent Technologies - G2258-87301, Standard capillary, S/S, pre-swaged/pre-swaged

BUFFER LOOP TUBING ASSY PTFE - G2258-87300

CrossLab Needle and Needle Seats for HPLC, Agilent Technologies - G2258-87102, Twin needle seat, for G2258A dual loop autosampler

CrossLab Needle and Needle Seats for HPLC, Agilent Technologies - G2258-68710, Needle assembly, for G2258A dual loop autosampler

Crosslab Bottle Head Assemblies for HPLC, Agilent Technologies - G2258-23201, Frit adapter, preparative, PTFE, for ¹/8 IN. Ext. Ø tubing (3.2 mm), for 3150-0944, used with Dual loop autosamplers

PLATE F/54X2ML VIAL F/G1367A/B/C/D/E PK6 - G2255-68700, Vial plate, for 54×2 ml vials

CrossLab Instrument Supplies for GC/MS, Agilent Technologies - G1999-20446, Drawout plate, 73CI, for Agilent 5975 MSD

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G1999-20021, Screw, socket-head cap for mounting filaments, for 5973; 5975; 5977; 7000A; 7000B; 7000C; 7200

TARGET PLATE FOR AP-MALDI LC/MS - G1972-60025

APPI LAMP - G1971-60025

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1964-80659, Capillary, 6-inlet, 0.61×90 mm, 1G, hexabore resistive capillary for the Agilent 6400 Series Triple Quadrupole LC/MS

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1960-80103, Channel electron multiplier, low gain, for LC/MS

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1960-67470, Nebulizer adjustment kit

UNIV INLET FILTER REPLACEMENT KIT - G1960-67100

NARROW BORE CAPILLARY CAP - G1960-20310

Nebulizers and Supplies, Agilent Technologies - G1960-20033, Microflow nebulizer needle

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1960-20032, Nebulizer needle, ESI

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1958-67098, Nebulizer support assembly, ES, tested

SPRAY SHIELD SMALL - G1958-20050

CORONA NEEDLE (EACH) - G1947-20029

CAPILLARY CLEANING WIRE (500 FT SPOOL) - G1946-80054

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1946-68704, APCI needle replacement kit

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1946-68703, ESI nebulizer kit. Includes needle holder, ferrule, and ESI needle

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1946-67098, Nebulizer assembly, ESI, tested

H.T. CAPILLARY CAP - G1946-20301

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - G1946-20213, Ferrule, for nebulizer needle, graphite-filled polyimide, 0.3 mm

SPRAY SHIELD (END CAP) - G1946-20157

G1888A PM KIT WITH 1-ML LOOP - G1888-60702

STRAINER FOR COOLING WATER FOR ICP-MS - G1833-67024

EXTRACTION LENS 2 FOR S-LENS FOR ICP-MS - G1833-65593

EXTRACTION LENS 1 FOR S-LENS FOR ICP-MS - G1833-65592

SKIMMER BASE STAINLESS FOR 7500CE/CX/CS - G1833-65591

SKIMMER BASE BRASS FOR 7500 CS/CE/CX - G1833-65590

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G1833-65583, Nebulizer gas line connector for Microflow PFA concentric nebulizer

PFA SAMPLE TUBING02 ID16 OD 70CM PK3 - G1833-65573

PFA SAMPLE TUBING 015 ID 16 OD 70 CM PK3 - G1833-65572

CrossLab Peristaltic Pump Tubing for ICP-MS, Agilent Technologies - G1833-65571, Peristaltic pump tubing, aqueous, HF acid and strong acid compatibility, for internal standard (ISTD) uptake, 3 stops, orange/red

NI SKIMMER CONE FOR 7500C 1/PK - G1833-65497

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G1833-65430, Clamp for connection of ball and socket joint on spray chamber outlet, quartz connector and torch inlet

CrossLab Tools and Manuals for ICP-MS, Agilent Technologies - G1833-65404, ICP-MS lens polishing paper, 5 sheets each of waterproof polishing paper number 400 and 1200

O-RINGS FOR VENT VALVE VITON 2/PK - G1833-65332

CrossLab Skimmer Bases for ICP-MS, Agilent Technologies - G1833-65132, Platinum (Pt) skimmer cone with copper (Cu) base Agilent 7500cs, use with Pt sampling cone.

CrossLab Filters for ICP-MS, Agilent Technologies - G1820-80341, Argon gas filter

BASIC LC CONNECTION KIT - G1820-65541

FERRULE + O-RING KIT FOR CARRIER GAS 1/P - G1820-65533

TUBING W/GUIDE 03ID 16OD 70 CM 5/PK - G1820-65531

TUBING W/GUIDE 02ID 16OD 70CM 5/PK - G1820-65527

TUBING W/GUIDE 015 ID 16 OD 70CM PK5 - G1820-65526

CrossLab Drain Tubing for ICP-MS, Agilent Technologies - G1820-65515, Drain Tubing for aqueous or organic waste, ETFE core, 4 mm int.Ø., 6 mm ext.Ø., 2.5 m length per unit

DRAIN TANK FOR ORGANIC SOLVENT 2L 1/PK - G1820-65505

O-RING KIT FOR CONCENTRIC NEB PK20 - G1820-65491

CrossLab Uptake PFA Tubing for ICP-MS, Agilent Technologies - G1820-65478, Sample tubing, PFA, 1.6 mm ext. Ø., for online internal standard addition

SCREWS FOR SKIMMER BASE (4/PK) - G1820-65435

CrossLab Sampler Cones and Care Packages for ICP-MS, Agilent Technologies - G1820-65239, ICP-MS sampler cone, Platinum-tip with Copper base. Suitable for 7500. Standard cone used with s/cs-lens for semiconductor applications, optional for other configurations

CrossLab Sampler Cones and Care Packages for ICP-MS, Agilent Technologies - G1820-65238, ICP-MS sampler cone, nickel-tip with copper base

PT SKIMMER CONE FOR 7500S 1/PK - G1820-65237

Crosslab Peristaltic Pump Tubing for ICP-MS, Agilent Technologies - G1820-65217, Peristaltic pump tubing, silicone, 3-stop, white/white tabs, Compatible with 7500; 7700; 8800; 7800; 7900; 8900; All Agilent ICP-MS systems; 7850, 1.02 mm I.D.

CrossLab Nebulizers for ICP-MS, Agilent Technologies - G1820-65138, Nebulizer, concentric, quartz, recommended for organic and high purity analysis

CrossLab Uptake PFA Tubing for ICP-MS, Agilent Technologies - G1820-65105, Sample tubing, PFA, 1.6 mm ext. Ø., Standard sample uptake tubing used

NI SKIMMER CONE FOR 7500 A/I/S 1/PK - G1820-65050

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - G1820-65027, Connector for plasma and auxiliary gas lines, for gas line connection to torch, 1 of each. Includes 6 mm and 4 mm 90 degree gas connectors, with PTFE body and ECTFE nut. Suitable for all Agilent ICP-MS

DRAIN TANK (WITH PVC CONNECTOR1 LITER) - G1820-65016

CrossLab Polyvinyl Alcohol (PVA) Coated Capillaries, Agilent Technologies - G160U-61219, Universal CE capillary, polyvinyl alcohol (PVA), 50 µm ID, 60 cm effective length, 71 cm total length

GASKET - G1607-20030

CrossLab Polyvinyl Alcohol (PVA) Coated Capillaries, Agilent Technologies - G1600-67219, CE-MS capillary, polyvinyl alcohol (PVA), 50 µm ID, 125 cm effective length, 125 cm total length

Spare Parts for CE Systems, Agilent Technologies - G1600-67201, Pre-puncher

CrossLab Standard Bare Fused Silica Capillaries, Agilent Technologies - G1600-63211, CE capillary, bare fused silica, 50 µm ID, 24.5cm effective length, 33 cm total length

High Sensitivity Detection Cells, Agilent Technologies - G1600-63200, CE cell fitting kit

Crosslab Extended Light Path Capillaries, Agilent Technologies - G1600-62332, CE extended light path (2.7x) capillary, bare fused, 75 µm Int.Ø, 72 cm effective length, 80.5 cm total length, 200 µm optical path length

CrossLab Standard Bare Fused Silica Capillaries, Agilent Technologies - G1600-62311, CE capillary, bare fused silica, 75 µm ID, 72 cm effective length, 80.5 cm total length

CrossLab Standard Bare Fused Silica Capillaries, Agilent Technologies - G1600-62211, CE capillary, bare fused silica, 50 µm ID, 72 cm effective length, 80.5 cm total length

CrossLab Extended Light Path Capillaries, Agilent Technologies - G1600-61332, CE extended light path (2.7x) capillary, bare fused silica, 75 µm ID, 56 cm effective length, 64.5 cm total length

CrossLab Extended Light Path Capillaries, Agilent Technologies - G1600-61232, CE extended light path (3x) capillary, bare fused silica, 50 µm ID, 56 cm effective length, 64.5 cm total length

CrossLab Polyvinyl Alcohol (PVA) Coated Capillaries, Agilent Technologies - G1600-61219, CE capillary, polyvinyl alcohol (PVA), 50 µm ID, 56 cm effective length, 64.5 cm total length

CrossLab Standard Bare Fused Silica Capillaries, Agilent Technologies - G1600-61211, CE capillary, bare fused silica, 50 µm ID, 56 cm effective length, 64.5 cm total length

CrossLab Extended Light Path Capillaries, Agilent Technologies - G1600-60233, CE extended light path (3x) capillary, bare fused silica, 50 µm ID, 35 cm effective length, 43.5 cm total length

CrossLab Standard Bare Fused Silica Capillaries, Agilent Technologies - G1600-60211, CE capillary, bare fused silica, 50 µm ID, 40 cm effective length, 48.5 cm total length

INSERT WELDMENT VALVED SYSTEM W/FILTER - G1580-60585

Cool On-Column (COC) Inlet Supplies, Agilent Technologies - G1545-80530, Septum nut, 530 µm

CrossLab Direct Connect Liners for GC, Agilent Technologies - G1544-80730, Inlet liner, direct, direct connect press-fit column connection, single taper, bottom hole, deactivated

CrossLab Direct Connect Liners for GC, Agilent Technologies - G1544-80700, Inlet liner, direct, direct connect press-fit column connection, double taper, bottom hole, deactivated

Programmable Temperature Vaporizing (PTV) Inlet, Agilent Technologies - G1544-80550, Capillary inlet trap assembly

SPLIT VENT TRAP KIT FOR 6890 6850 GC - G1544-60610

SPLIT/SPLITLESS INLET 1/4IN SPLIT FILTER - G1544-60575

SPLIT/SPLITLESS INLET RETAINING NUT - G1544-20590

Nitrogen Phosphorus Detector (NPD) Supplies, Agilent Technologies - G1534-40030, Insulator, MPD lower

Nitrogen Phosphorus Detector (NPD) Supplies, Agilent Technologies - G1534-40020, Insulator, NPD upper

Nitrogen Phosphorus Detector (NPD) Supplies, Agilent Technologies - G1534-20530, NPD collector funnel

CrossLab Electron Capture Detector (ECD) for GC, Agilent Technologies - G1533-80565, ECD makeup gas adapter. Includes gigabore liner for standard ECD (not compatible with micro ECD)(19233-20625), ECD adaptor end cap (19233-20755)

CAPILLARY COLUMN ADAPTER - G1532-80540

TCD CELL 6890 - G1532-60685

FILAMENT BLOCK ONLY ORIGINAL EPC STD TCD - G1532-60675

PACKED COLUMN ADAPTER 1/4 INCH - G1532-20710

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - G1531-60680, Igniter cable assembly, universally compatible

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - G1531-21090, Collector body, Hastelloy, for Agilent 6890, 6850

Nitrogen and Sulphur Chemiluminescence Detectors Supplies, Agilent Technologies - G1530-80650, Oven exhaust deflector for 6890

Integrator Supplies and Cables, Agilent Technologies - G1530-60930, Cable for automatic liquid sampler, remote start/stop, 9 male/9 female

Integrator Supplies and Cables, Agilent Technologies - G1530-60590, External event control, cable, 8 pins/spade lugs

Integrator Supplies and Cables, Agilent Technologies - G1530-60560, Analog output signal cable assembly, spade lugs/6 pins

CrossLab Sample Loops for HPLC, Agilent Technologies - G1377-87310, 40 µl, Sample loop

CrossLab Sample Loops for HPLC, Agilent Technologies - G1377-87300, 40 µl, Sample loop

NEEDLE ASSEMBLY G1377A U-WL PLATE SAMPLR - G1377-87201, Needle assembly, stainless steel, for G1377A micro well plate sampler. Compatible with needle seat G1377-87000, G1377-87001, G1377-87002, G1377-87101

NEEDLE SEAT F/G1377 U-WELL PLATE SAMPLER - G1377-87101, Needle seat, for G1377 µ-well plate sampler

CrossLab Capillaries for HPLC, Agilent Technologies - G1375-87320, Capillary, MLP/WF, non-swaged/non-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - G1375-87318, Standard capillary, MLP/WPFL, non-swaged/non-swaged

NEEDLE SEAT CAPILLARY 100 UM 150 MM - G1375-87317, Special capillary, 3× fittings, MLP/WG, non-swaged/non-swaged

SAMPLE LOOP SS 8 UL. FOR G1377A - G1375-87315, 8 µl, Sample loop for G1377A high performance micro autosampler

CrossLab Capillaries for HPLC, Agilent Technologies - G1375-87312, Capillary, WG/MLP, pre-swaged/non-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - G1375-87311, Capillary, MLP/WF, non-swaged/non-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - G1375-87306, Capillary, MLP/WG, non-swaged/pre-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - G1375-87304, Capillary, MLP/WF, non-swaged/non-swaged

CAPILLARY SS 0.12MM ID 250MM - G1367-87304, Standard capillary, S/S, pre-swaged/pre-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - G1367-87302, Seat capillary, S/M, pre-swaged/non-swaged

NEEDLE ASSEMBLY FOR G1367D - G1367-87202, Needle assembly, stainless steel, for G1367C well plate sampler. Compatible with needle seat G1367-87017

NEEDLE ASSEMBLY FOR G1367A SAMPLER - G1367-87200, Needle assembly

NEEDLE SEAT VESPEL 0.12MM CAPILLARY - G1367-87102, Needle seat, Vespel, 0.12 mm Int.Ø capillary, 1.2 µl, for G1367A, G1367B well plate sampler

PM KIT FOR G1367E AUTOSAMPLER - G1367-68741, Preventive maintenance kit

KIT PM FOR HIP SAMPLER G1367C/D - G1367-68734, Preventive maintenance kit

PM KIT FOR G1367A/B AUTOSAMPLERS - G1367-68730, Preventive maintenance kit

CrossLab Capillaries for HPLC, Agilent Technologies - G1367-60301, Standard capillary, S/S, pre-swaged/pre-swaged

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - G1367-60003, 100 µl analytical head assembly

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - G1364-87202, Needle assembly, stainless steel, 20 mm for Analytical Fraction Collector

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - G1364-87201, Needle assembly, stainless steel, short, for fraction collector

CrossLab Sample Trays for HPLC, Agilent Technologies - G1364-84525, Tray for fraction collector, 126 tubes, 16 mm hole Ø

CrossLab Sample Trays for HPLC, Agilent Technologies - G1364-84524, Tray for fraction collector, 60 tubes, 25 mm hole Ø

CrossLab Sample Trays for HPLC, Agilent Technologies - G1364-84523, Tray for fraction collector, 40 tubes, 30 mm hole Ø

CrossLab Sample Trays for HPLC, Agilent Technologies - G1364-84516, Tray for fraction collector, 215 tubes, 12 mm hole Ø

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - G1364-68712, Tubing kit, 10 ml/min, for G1364C preparative fraction collector

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - G1364-68711, Tubing kit, 100 ml/min, for G1364B/C preparative fraction collector

TRAY FOR 100X2ML VIALS THERMOSTATTABLE - G1364-60111, Tray for 100×2 ml vials, coolable

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - G1364-44613, Tray holding 15×6 ml vials

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - G1364-44612, Tray holding 40×2 ml vials, for fraction collector G1364E/F and G5664B

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - G1364-44610, Tray, holding 100×2 ml vials

CrossLab RID Supplies for HPLC, Agilent Technologies - G1362-87300, Interface capillary

CrossLab RID Supplies for HPLC, Agilent Technologies - G1362-68706, Interface tubing kit

KIT PM FOR 1100 SERIES PREP PUMP - G1361-68710, Preventive maintenance kit

CrossLab Capillaries for HPLC, Agilent Technologies - G1361-67302, Standard capillary, 2× ¹/16 IN. male, S/S, pre-swaged/pre-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - G1361-67301, Special capillary, 2× ¹/16 IN. male, S/S, pre-swaged/pre-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - G1361-67300, Special capillary, 2× ¹/16 IN. male, S/S, pre-swaged/pre-swaged

INLET AND OUTLET FOR PREP PUMP R - G1361-60052, Valve assembly double seat, inlet and outlet for prep pump, requires outlet valve adapter, long (p/n G1361-25202) or inlet valve adapter, long (p/n G1361-25203)

BOTTLE HEAD ASSEMBLY FOR PREP SYSTEM - G1361-60022, Bottle head assembly for prep system, GL45

FRIT ADAPTER PTFE FOR 4.7 MM OD TUBING - G1361-23205, Frit adapter, preparative, PTFE, for 3/16 IN. OD tubing, 4.7 mm int.Ø.

FRIT ADAPTER 4MM PTFE - G1361-23204, Frit adapter, preparative, PTFE, for 4 mm ext.Ø. tubing, 4.7 mm int.Ø.

CrossLab Outer Tube-Sets for Semi and Fully Demountable Torches, Agilent Technologies - G1361-22402, Piston, sapphire

CrossLab Injection Valve Supplies for HPLC, Agilent Technologies - G1353-68750, Valve kit 2, pos/6 port, 600 bar

CrossLab Sample Loops for HPLC, Agilent Technologies - G1329-87302, -, Loop extension capillary, 0.25 mm, 180 cm

CrossLab Needle and Needle Seats for HPLC, Agilent Technologies - G1329-87101, Micro LC needle seat assembly, 0.1 mm Int.Ø capillary, 1.2 µl, capillary, MP fitting type right end

CrossLab Autosampler Needles and Plungers, Agilent Technologies - G1329-80001, Needle assembly, for G1389A autosampler

CrossLab Maintenance Kits for HPLC, Agilent Technologies - G1329-68737, Door replacement kit, for 1260 Infinity LC sampler

CrossLab Sampler and Maintenance Kits for HPLC, Agilent Technologies - G1329-68727, Door replacement kit, for G1329A autosampler

LIGHT PROTECTION KIT FOR G1329A - G1329-68718, Light protection kit for G1329A

CAPILLARY SS 0.17MM ID 500MM - G1328-87600, Standard capillary, SH/S, non-swaged/non-swaged

Crosslab Degasser Supplies for HPLC, Agilent Technologies - G1322-68705, Online Degasser Assembly Kit, for 1100 LC System;1200 LC System (G1322A, G1379A/B)

Crosslab Degasser Supplies for HPLC, Agilent Technologies - G1322-67300, Tubing Kit, degasser to pump, 30 cm pieces of tubing with screws and bushings, for G1322A, G1379A/B, G4225A

CrossLab FLD Supplies for HPLC, Agilent Technologies - G1321-60015, Flow cell, 4 µl, 20 bar (pH 1 - 9.5 )

CAPILLARY SS 0.12MM ID 210MM PS/NS - G1316-87328, Standard capillary, S/M4, pre-swaged/non-swaged

CAPILLARY SS 0.12MM ID 170MM - G1316-87323, Standard capillary, S/S, non-swaged/non-swaged

CAPILLARY SS 0.12MM 340MM WITH FITTINGS - G1316-87319, Standard capillary, S/S, non-swaged/non-swaged

CAPILLARY SS 0.12MM ID 300MM - G1316-87318, Standard capillary, S/S, non-swaged/non-swaged

CAPILLARY SS 0.12MM ID 210MM - G1316-87317, Standard capillary, S/S, non-swaged/non-swaged

CAPILLARY SS 0.12MM ID 170MM N-S/N-S - G1316-87316, Standard capillary, S/S, non-swaged/non-swaged

CAPILLARY SS 0.12MM ID 130MM - G1316-87315, Special capillary, S/U, non-swaged/pre-swaged

SS CAPILLARY 50 X 0.12 MM M/F NS - G1316-87312, Special capillary, S/U, non-swaged/pre-swaged

CAPILLARY STAINLESS STL 0.12MM ID 500MM - G1316-87309, Standard capillary, S/S, non-swaged/pre-swaged

CAPILLARY STAINLESS STEEL 0.12X340MM S/M - G1316-87305, Standard capillary, S/M, pre-swaged/non-swaged

LOW DISPERSION HEAT EXCHANGER DOUBLE KIT - G1316-80022, Low dispersion heat exchanger double kit, 1.6 µl

HEAT EXCHANGER HI TEMP 1.6UL 0.12MM L - G1316-80003, Heat exchanger, L-shape, high temperature, 1.6 µl, 0.12 mm Int. Ø, 'Left'

HEAT EXCHANGER HIGH TEMP 1.6UL 0.12MM L - G1316-80002, Heat exchanger, L-shape, high temperature, 1.6 µl, 0.12 mm Int. Ø, 'Right'

CAPILLARY SS 0.12MM ID 100MM - G1316-27301, Standard capillary, M4/M4, non-swaged/non-swaged

CAPILLARY STAINLESS STL 0.12MM ID 150MM - G1315-87312, Standard capillary, S/S, pre-swaged/non-swaged

CAPILLARY STAINLESS STL 0.17MM ID 150MM - G1315-87303, Special capillary, S/U, non-swaged/pre-swaged

CrossLab DAD and MWD Supplies for HPLC, Agilent Technologies - G1315-68712, Cell repair kit for standard flow cell, for Agilent diode array and multiple wavelength detectors. Includes window screw kit, hexagonal wrench, 4 mm, seal kit

CrossLab DAD and MWD Supplies for HPLC, Agilent Technologies - G1315-68711, Back seals, 2.3 mm hole, PTFE

CrossLab DAD and MWD Supplies for HPLC, Agilent Technologies - G1315-68710, Front seals, 1.3 mm hole, PTFE

FLOW CELL STANDARD 10 MM 13 UL 120 BAR - G1315-60012, Flow cell, standard, 10 mm, 13 µl, 120 bar

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - G1315-45001, Holmium oxide filter lever

Crosslab VWD Supplies for HPLC, Agilent Technologies - G1314-87302, Special capillary, S/special

Crosslab VWD Supplies for HPLC, Agilent Technologies - G1314-87301, Special capillary, S/special, pre-swaged/pre-swaged

Detector Kits, Agilent Technologies - G1314-65061, VWD standard 'D' type flow cell kit; includes 2 windows, 2 gaskets #1, 2 gaskets #2

CrossLab Flow Cells for HPLC, Agilent Technologies - G1314-65050, Standard flow cell kit

CrossLab Sample Loops for HPLC, Agilent Technologies - G1313-87309, 100 µl, Sample loop

CrossLab Capillaries for HPLC, Agilent Technologies - G1313-87308, Seat Capillary, 1.5 ml

SEAT CAPILLARY 0.5 ML 0.5MM ID CAPILLARY - G1313-87307, Seat capillary, 0.5 ml, compatible with 1100 LC System; G1313A

CAPILLARY STAINLESS STL 0.12MM ID 180MM - G1313-87304, Capillary, stainless steel, S/S fitting type, pre-swaged/non-swaged

LOOP EXTENSION CAPILLARY SS 900 UL - G1313-87303, 900 µl, Loop extension capillary

CrossLab Tubing for HPLC, Agilent Technologies - G1313-87300, Waste tube

CrossLab Autosampler Needles and Plungers, Agilent Technologies - G1313-87203, Needle assembly

NEEDLE SEAT PEEK 0.17MM CAPILLARY 2.3UL - G1313-87102, Needle seat, PEEK, 0.17 mm Int.Ø capillary, 2.3 µl. Compatible with needle assembly G1313-87203

CrossLab Instrument Supplies for LC, Agilent Technologies - G1313-68713, Needle clamp kit

SOLVENT MIXER 1100-SERIES 60X4.6MM - G1312-87330, Solvent mixer, stainless steel, 60×4.6 mm

CAPILLARY SS 0.17 X 105MM S/S PS/PS - G1312-87306, Standard capillary, S/S, pre-swaged/pre-swaged

CAPILLARY SS 0.17MM ID 150MM - G1312-87305, Standard capillary, S/S, pre-swaged/pre-swaged

ABSORBER CAPILLARY 500UL RIGID BENT SS - G1312-87300, Special capillary, absorber capillary, 500 µl volume, S/S, pre-swaged/pre-swaged

CrossLab Pump and Maintenance Kits for HPLC, Agilent Technologies - G1312-68711, Active seal wash kit for 1100/1200 binary pump

CALIBRATION CAPILLARY ASSEMBLY - G1312-67500, Special capillary, calibration capillary assembly, S/none

CAPILLARY DAMPER TO PURGE VALVE RIGID SS - G1312-67301, Special capillary, damper to purge valve, S/S, pre-swaged/pre-swaged

CAPILLARY OUTLET BALL VALVE TO PISTON 2 - G1312-67300, Special capillary Outlet Ball Valve to Piston 2, S/S, pre-swaged/pre-swaged

OUTLET VALVE TYPE N F/NORMAL PHAS 600BAR - G1312-60167, Outlet valve, Type N, for normal phase application, 600 bar, for 1100, 1200, 1260 Infinity LC pumps. Outlet valve with integrated seal

PASSIVE INLET VALVE TYP N F/NORMAL PHASE - G1312-60166, Passive inlet valve, type N, for normal phase applications, 600 bar, for 1100, 1200, 1200 RRLC, 1260 Infinity LC pumps. Inlet valve with integrated seal

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - G1312-60068, Solvent selection valve with holder

CAPILLARY OUTLET VALVE 1 TO DAMPER - G1311-81601, Special capillary, outlet valve 1 to damper (upper valve), S/S, pre-swaged/pre-swaged

CAPILLARY DAMPER TO INLET PUMP CHAMBER 2 - G1311-81600, Special capillary, damper to inlet pump chamber 2, S/S, pre-swaged/pre-swaged

CrossLab Pump and Maintenance Kits for HPLC, Agilent Technologies - G1311-68711, Active seal wash kit for 1100/1200 isocratic and quaternary pump

PLUNGER HOUSING - G1311-60002

CrossLab Maintenance Kits for HPLC, Agilent Technologies - G1310-68731, Preventive maintenance kit for Seal-Wash option

Integrator Supplies and Cables, Agilent Technologies - G1103-61611, General purpose cable GPIO, open end

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G1099-20136, Transfer line socket, for Agilent 5973 MSD

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G1099-20130, Ion source chamber, for 5973; 5975

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - G1072-20008, Drawout cylinder for 5973; 5975; 5977

CrossLab Graphite/Vespel Ferrules for GC, Agilent Technologies - CR213200, Ferrules, straight, 40% graphite/60% vespel, ¹/8 IN. ext.Ø

Crosslab Graphite Ferrules for GC, Agilent Technologies - CR213165, Ferrule, short, 40% graphite/60% Vespel, for 0.32 mm Int.Ø columns, ¹/16 IN. Ext.Ø × 0.5 mm Int.Ø

Crosslab Graphite Ferrules for GC, Agilent Technologies - CR213164, Ferrules, capillary for 0.25 mm Int.Ø columns, 40% graphite/60% vespel, short, ¹/16 IN. Ext.Ø × 0.425 mm Int.Ø

CrossLab Gas Clean Purification System, Agilent Technologies - CP82117, Connector, male, for gas clean connecting unit, ¹/8 IN. with dust filter

Crosslab Ultimate Plus Deactivated Fused Silica, Agilent Technologies - CP802505

CrossLab Gas Clean Purification System, Agilent Technologies - CP7988, Gas clean connecting unit, 1-position, ¹/8 IN.

Accessories, Agilent Technologies - CP7983, O-rings, Viton, Gas Clean connecting unit

CrossLab CP-Select 624 CB Columns, Agilent Technologies - CP7414, J&W CP-Select 624 CB GC column, 7 IN. cage

CrossLab Gas Clean Purification System, Agilent Technologies - CP738407, Gas clean connecting unit, 2-position, ¹/8 IN.

CrossLab Tubing, Agilent Technologies - CP4260, Tubing, pretested

TUBING PTFE 1/4IN.ODX3.2MMID - CP4105

CrossLab Tubing, Agilent Technologies - CP4025, Tubing

CrossLab Tubing, Agilent Technologies - CP4008, Tubing, pretreated

CrossLab Tubing, Agilent Technologies - CP4006, Tubing, pretreated

CrossLab In-line Gas Purifiers, Agilent Technologies - BOT-4, 750 cc, Big Oxygen trap, ¹/4 IN., 250 psig, 50 ppb substance concentration

CrossLab In-line Gas Purifiers, Agilent Technologies - BOT-2, 750 cc, Big Oxygen trap, ¹/8 IN., 250 psig, 50 ppb substance concentration

PEEK Tubing, Agilent Technologies - AL35724, Green, without stripe

TUBG PEEK 1/16IN X 0.005IN X 50 FT PK1 - AL35721

PEEK Tubing, Agilent Technologies - AL35720, Red, without stripe

CrossLab Vacuum Collars and Collection Plates, Agilent Technologies - A8961007B, Captiva 96-well collection plate seal

CrossLab SPEC Disk SPE, Agilent Technologies - A74819, SPEC disks, C18AR

SPEC 47MM C8 24/PK - A74702

Captiva Collection Plates, Agilent Technologies - A696001000, Captiva 96-deep well collection plate

SOLVENT INLET FILTER 20U - A6103

Accessories for Crosslab Metacarb columns, Agilent Technologies - A6005, MetaSaver precolumn filter, 0.5 µm

Captiva ND and ND Lipids Plates, Agilent Technologies - A5969002, Captiva ND 96-well plate, non-drip membrane, half skirt, round wells

Captiva Filter Plates, Agilent Technologies - A5967045, Captiva 96-well plate, half skirt, round wells

Captiva Filter Plates, Agilent Technologies - A596401000, Captiva 96-well plate, half skirt, round wells

Bond Elutâ„¢ SPEC Disk SPE, Agilent Technologies - A59619, Bond Elutâ„¢ SPEC C18AR, 96 round-well plate, 15 mg

Captiva Filter Plates, Agilent Technologies - A596002000B, Captiva 96-well plate, half skirt, round wells

Captiva Filter Plates, Agilent Technologies - A5960002, Captiva 96-well plate, half skirt, round wells

Captiva Filter Plates, Agilent Technologies - A5960002K, Captiva 96-well replacement filtration kit, round wells

OMIX Tips, Agilent Technologies - A57003100

Bond Elutâ„¢ SPEC Disk SPE, Agilent Technologies - A532DAU, 3 ml, SPE cartridge

Bond Elutâ„¢ SPEC Disk SPE, Agilent Technologies - A5322020, 3 ml, SPE cartridge

Bond Elutâ„¢ SPEC Disk SPE, Agilent Technologies - A5320320, 3 ml, SPE cartridge

Accessories for Crosslab Metacarb columns, Agilent Technologies - A5204, Metacarb cartridge holder

KIT EXHAUST CABINET HARDWARE - 9910130600

KIT ADAPTOR 11ML VIAL 130 CAROUSEL 5/PK - 9910116900

SYRINGE KIT FOR PSD-97/100/110 1/PK - 9910116800

HIGH CAPACITY CAROUSEL KIT FOR GTA 120 - 9910113100

CrossLab Autosampler Probes, Agilent Technologies - 9910112000, Probe, inert, PTFE-sleeved

CrossLab Autosampler Probes, Agilent Technologies - 9910111900, Probe, inert, PTFE-sleeved

Mark 7 Spray Chamber Supplies, Agilent Technologies - 9910105800, Kit, fluorinated liquid trap, float and magnet

LINEARITY CALIBRATN FILTER KIT CARY 500 - 9910095700

Mark 7 Spray Chamber Supplies, Agilent Technologies - 9910093600, Mixing paddles, fluorinated

MARK 7 SPRAY CHAMBER O-RING KIT ORGANIC - 9910093500

CrossLab O-Rings for Spray Chambers, Agilent Technologies - 9910093400, O-ring kit, nitrile, for aqueous samples for Mark 7 spray chamber

VGA FOR ZEEMAN ADAPTOR KIT AA240/280 - 9910093300

FURNACE WORKHD VIEWING MIRROR GTA110/120 - 9910091200

KIT CAP SEALS FOR SIPS 10/20 10/PK - 9910080300

Crosslab Peristaltic Pump Tubing for ICP-OES, Agilent Technologies - 9910075900, Peristaltic pump tubing, ketone solvents chemical compatibility, 2-bridged, orange/orange tabs, 150 mm tab separation. Suitable for 5100, 5110, 700 series, 5800, 5900, Liberty, Vista series, 4100, 4200, 4210

APERTURE MASK KIT FOR VASRA ACC 1/PK - 9910064700

MIXING PADDLES MARK VI S/CHAMBER 5/PK - 9910063600

Crosslab Burners and Supplies for Agilent Instruments, Agilent Technologies - 9910053900, Burner cleaning and alignment card for all Agilent AA systems

PTFE IMPACT BEADS MARK V/VI/7 5/PK - 9910053300

Crosslab Tubing for Cary UV Accessories, Agilent Technologies - 9910052900, Tubing, peristaltic pump kit for the Cary Routine Sampler Accessory. Aqueous and HF acid chemical compatibility. Includes silicon pump tubing and fittings. Suitable for Cary 100;Cary 300;Cary 4000;Cary 5000;Cary 6000i

ND AND BLUE FILTER SET WITH HOLDER 1/PK - 9910047700

O-RINGS FOR MARK VI UNIV S/CHAMBER 1/PK - 9910045700

Crosslab Capillary Tubing and Nebulizer Maintenance Supplies, Agilent Technologies - 9910044000, Capillary tubing, hi-vac nebulizer, for all Agilent AA systems

GAS-LIQUID SEPARATOR VGA-76 FOR AA - 9910040200

TUBING AND CONNECTOR KIT VGA 76 1/PK - 9910039900

BARREL NEBULIZER O-RING KIT 1/PK - 9910035200

KIT 5 RINSE BOTTLE CAPILLARIES 1/PK - 9910034200

GTA SHROUD REMOVAL TOOL - 9910033300

O-RING/GASKET KIT MARK VI SPRAY CHAMBER - 9910026500

Mark 7 Spray Chamber Supplies, Agilent Technologies - 9910025700, Glass impact beads, Mark V/VI/7 spray chambers

Crosslab Capillary Tubing and Nebulizer Maintenance Supplies, Agilent Technologies - 9910024800, High solids capillary tubing for all Agilent AA systems

Mark 7 Spray Chamber Supplies, Agilent Technologies - 9910024700, Cleaning wire (L×Ø = 3×0.3 m)

NEBULIZER CAPILLARY KIT PT/IR 1/PK - 9910024500

Crosslab ZORBAX, Agilent Technologies - 966967-906

Crosslab ZORBAX, Agilent Technologies - 963967-906

Crosslab ZORBAX, Agilent Technologies - 935967-906

Crosslab ZORBAX, Agilent Technologies - 931975-932

CrossLab Cleaning and Maintenance Supplies for LC/MS, Agilent Technologies - 9310-4828, Cloth, lint-free, 23×23 cm, 100% cotton

SOLVENT BOTTLE (GL45) CLEAR 2 L - 9301-6342, 2 L, Solvent bottle, GL 45, clear

SOLVENT BOTTLE (GL45) AMBER 2 L - 9301-6341, 2 L, Solvent bottle, GL 45, amber

Crosslab Degasser Supplies for HPLC, Agilent Technologies - 9301-1337, Syringe adapter, for G1322A

Flame Ionization Detector (FID) Supplies, Agilent Technologies - 9301-0985, Flame ionization detector cleaning kit. Includes reamers, wire mini brushes, handle

WRENCH 1/2 9/16 - 8720-0025

WRENCH OPEN END 9/16 IN AND 5/8 IN - 8720-0010

WRENCH-OPEN END 5/16IN - 8710-2801

WRENCH-OPEN END 1/4IN - 8710-2800

SCREW-DRIVER-TORQUE PRE-SET ADJUSTABLE - 8710-2790

WRENCH OPEN END 14 / 17 MM - 8710-2435

HEX KEY 9/64IN 15CM LONG T-HANDLE - 8710-2394

Tubing Cutters, Agilent Technologies - 8710-1931, Tubing cutter replacement blades

Crosslab Degasser Supplies for HPLC, Agilent Technologies - 8710-1930, Tubing cutter, for plastic/PEEK tubing, for 7700; 7800; 7900; 8800; 8900; 7500; All Agilent ICP-MS systems; PerkinElmer Elan; PerkinElmer Nexion; PE Optima series; PE Avio series; 700 series; 5100; 5110; 5800; 5900; 7850

WRENCH OPEN END 12 MM - 8710-1841

Instrument Supplies for LC/MS, Agilent Technologies - 8710-1709, Tubing cutter, ¹/8 to 5/8 IN. Ext.Ø tubing

BLADES HI-DUTY TUBE CUTTER 5/PK - 8710-1708

Flame Ionization Detector (FID) Supplies, Agilent Technologies - 8710-1346, Cleaning brush for split/splitless inlet split vent fitting, FID, collectors

NUT DRIVER 7MM - 8710-1217

SCREWDRIVER 4 POZIDRIV SHAFT NO 2 PT - 8710-0900

TOOL-SCDR-POZIDRIV 3-IN-BLADE-LG - 8710-0899

WRENCH OPEN END 7/16IN AND 9/16IN - 8710-0803

Instrument Supplies for LC/MS, Agilent Technologies - 8710-0510, Wrench, ¹/4×5/16 IN.

Instrument Supplies for LC/MS, Agilent Technologies - 8710-0007, Tweezers, 4 ³/4 IN. long

CrossLab ZORBAX GF-250/450 Kits, Agilent Technologies - 840140-901, Semi-preparative guard cartridge hardware kit, 9.4 mm Int. Ø cartridges (P system)

Crosslab InfinityLab Poroshell 120, Agilent Technologies - 823750-914, InfinityLab Poroshell

Crosslab ZORBAX, Agilent Technologies - 823750-901

CrossLab InfinityLab Poroshell 120 HILIC, Agilent Technologies - 821725-947, InfinityLab Poroshell 120 HILIC-Z

Crosslab InfinityLab Poroshell 120, Agilent Technologies - 821725-945, InfinityLab Poroshell

Crosslab ZORBAX, Agilent Technologies - 821725-937, ZORBAX Bonus RP

Crosslab InfinityLab Poroshell 120, Agilent Technologies - 821725-928, InfinityLab Poroshell

Crosslab InfinityLab Poroshell 120, Agilent Technologies - 821725-925, InfinityLab Poroshell

Crosslab InfinityLab Poroshell 120, Agilent Technologies - 821725-914, InfinityLab Poroshell

Crosslab InfinityLab Poroshell 120, Agilent Technologies - 821725-913, InfinityLab Poroshell

Crosslab ZORBAX for NP/SFC, Agilent Technologies - 821125-919

CrossLab Poroshell 300 Columns, Agilent Technologies - 821075-918, Poroshell StableBond (ZGC)

Crosslab ZORBAX, Agilent Technologies - 820950-933

Crosslab ZORBAX, Agilent Technologies - 820950-931

Crosslab ZORBAX, Agilent Technologies - 820950-927

Crosslab ZORBAX, Agilent Technologies - 820950-924

Crosslab ZORBAX, Agilent Technologies - 820950-921

Crosslab ZORBAX, Agilent Technologies - 820950-920

Crosslab ZORBAX for NP/SFC, Agilent Technologies - 820950-919

Crosslab ZORBAX, Agilent Technologies - 820950-918

Crosslab ZORBAX, Agilent Technologies - 820950-917

Crosslab ZORBAX, Agilent Technologies - 820950-916

Crosslab ZORBAX, Agilent Technologies - 820950-915

Crosslab ZORBAX, Agilent Technologies - 820950-913

CrossLab ZORBAX GF-250/450 Kits, Agilent Technologies - 820950-911

Crosslab ZORBAX for NP/SFC, Agilent Technologies - 820950-908

CrossLab ZORBAX Ion Exchange Columns, Agilent Technologies - 820950-904

Crosslab ZORBAX, Agilent Technologies - 820950-902

Crosslab ZORBAX for NP/SFC, Agilent Technologies - 820950-901

Crosslab ZORBAX, Agilent Technologies - 820750-901

Crosslab ZORBAX, Agilent Technologies - 820675-115

CrossLab ZORBAX GF-250/450 Kits, Agilent Technologies - 820400-901, PrepHT cartridge hardware kit, 21.2 mm end fittings

STANDARDS RACK SPS 3 6 X 29MM OD TUBES - 810167000

STANDARDS RACK SPS 3 11 X 16MM OD TUBES - 810166900

Mark 7 Spray Chamber Supplies, Agilent Technologies - 810134400, Guide capillary nebulizer

Mark 7 Spray Chamber Supplies, Agilent Technologies - 810134300, Clamp bush guide

Mark 7 Spray Chamber Supplies, Agilent Technologies - 810133400, Clamp bead adjuster

Crosslab Column Ferrules for Third Party GC Instruments, Agilent Technologies - 8010-0304, Agilent capillary ferrule for Varian/Bruker, 0.8 mm Int.Ø, graphite, 0.53 mm Int.Ø column, max. 450 °C

Crosslab Column Ferrules for Third Party GC Instruments, Agilent Technologies - 8010-0269, Agilent capillary column ferrule for Varian/Bruker; Shimadzu; PerkinElmer, 0.8 mm Int.Ø, graphite/polyimide, for 0.53 mm columns, max. 350 °C

UNION SS 1/16IN FOR WATER SYSTEM - 8005-0836, Agilent union, stainless steel, for ¹/16 IN. Ext.Ø tubing, for Waters systems

CL COMPRESSION SCREWS FERRULES PK5 WAT - 8005-0835, Compression screws and ferrules, for Waters LC systems, similar to Waters WAT025604

Crosslab Column Nuts for Third Party GC Instruments, Agilent Technologies - 8004-0311, Agilent column nut for Varian/Bruker, brass

Crosslab Column Ferrules for Third Party GC Instruments, Agilent Technologies - 8004-0216, Agilent straight ferrule for Varian/Bruker, 0.8 mm Int.Ø, 40% graphite/60% Vespel, 0.53 mm Int.Ø column, max. 400 °C

Crosslab Column Ferrules for Third Party GC Instruments, Agilent Technologies - 8004-0214, Agilent straight ferrule for Varian/Bruker, 0.5 mm Int.Ø, 40% graphite/60% Vespel, 0.32 mm Int.Ø column, max. 400 °C

Crosslab Column Ferrules for Third Party GC Instruments, Agilent Technologies - 8004-0212, Agilent straight ferrule for Varian/Bruker, 0.425 mm Int.Ø, 40% graphite/60% Vespel, 0.25 mm Int.Ø column, max. 400 °C

Crosslab Liner O-rings for Third Party GC Instruments, Agilent Technologies - 8004-0201, Agilent liner o-ring for Varian/Bruker, non-stick fluoroelastomer, 1177 split/splitless, 6.3/6.5 mm O.D.

CrossLab Inlet Liners for Third Party GC Instruments, Agilent Technologies - 8004-0178, Agilent liner for Varian/Bruker, Ultra Inert, split/splitless, single taper

CrossLab Inlet Liners for Third Party GC Instruments, Agilent Technologies - 8004-0170, Agilent liner for Varian/Bruker, Ultra Inert, split/splitless, glass wool, single taper

CrossLab Inlet Liners for Third Party GC Instruments, Agilent Technologies - 8004-0156, Agilent liner for Varian/Bruker, Ultra Inert, split, straight

CrossLab Inlet Liners for Third Party GC Instruments, Agilent Technologies - 8004-0114, Agilent liner for Varian/Bruker, split/splitless, glass wool, single taper

CrossLab Inlet Liners for Third Party GC Instruments, Agilent Technologies - 8004-0104, Agilent liner for Varian/Bruker, split, straight, glass wool

NEBULIZER MIRAMIST PEEK FOR OPTIMAS - 8003-0974

FIMS HG FILTER REPLACMNT FOR HG SCRUBBER - 8003-0972

FIMS HG LAMP - 8003-0971

FIMS CELL ONLY (NO WINDOWS) - 8003-0970

QUARTZ CELL FOR FIAS (EXCL WINDOWS) - 8003-0967

STANDARD THGA GRAPHTE TUBE W ENDCAPS 5PK - 8003-0958

O-RING BEHIND CONTACT CYLINDER - 8003-0957

THGA FLTR CARTRIDGE FUME EXTRACTR PK50 - 8003-0956

SPARE GRAPHITE TIP FOR FUME EXTRACTSYSTM - 8003-0955

HGA GRAPHITE TUBES W ADV PLATFORM 5/PK - 8003-0954

MODIFIED THGA CONTACT CYLINDERS 1 PAIR - 8003-0949

PFA END CAP FOR INERT PFA S/C NEXION - 8003-0948

S/CHAMBER INERT PFA SCOTT STYLE NEXION - 8003-0947

S/CHAMBER INERT WITH PFA END CAP NEXION - 8003-0946

BURNER MIXING CHAMBER ASSY-AANALYST - 8003-0945

CAPILLARY ASSY METAL BODY NEB FOR PE AA - 8003-0864

O-RING F/HI-SENS NEB W/PT-IR CAPIL-AANAL - 8003-0863

O-RING F/HI-SENS NEB W/PT-IR CAPILLARY - 8003-0862

O-RING F/HI-SENS NEB W/PT-IR CAPIL-PINAA - 8003-0861

IMPACT BEAD F/HI-SENS NEB W/PT-IR CAPIL - 8003-0860

BURNER DRAIN ASSY - AANALYST 700/800 - 8003-0856

BURNER DRAIN ASSY ORGANICS-AANALYST7/800 - 8003-0855

BURNER DRAIN ASSY ORGS-AANALYST1/2/3/400 - 8003-0854

O-RING 1/8 IN ID SEAL PLUG IN END CAP - 8003-0853

O-RING 1/4 IN IDF/END CAP ASY 00570984 - 8003-0852

SEAL PLUG F/IMPACT BEAD / END CAP ASSY - 8003-0851

O-RING BURNER HEAD 0984 X 0139 IN - 8003-0849

END CAP ASSY F/METAL BODY NEBS-PINAACLE - 8003-0845

END CAP LATCH ASSY FOR PINAACLE 900 - 8003-0838

NEBULIZER KIT FOR AANALYST - 8003-0837

HI-SENS NEBULIZER WITH PT/IR CAPILLARY - 8003-0836

O-RING HI-SENS NEBULIZER W/TA CAPILARY - 8003-0835

O-RING HI-SENS NEBULIZER W/PT/IR CAPIL - 8003-0834

SPRING HI-SENS NEBULIZER W/PT-IR CAPIL - 8003-0833

NEBULIZER ASSY HIGH-SENSITIV GEMTIP - 8003-0831

CAPILLARY ASSEMBLY FOR SS NEBULIZER - 8003-0827

O-RING KIT FOR NEBULIZER ASSY - 8003-0826

SPRING FOR METAL BODY NEBULIZER ASSEMBLY - 8003-0823

END CAP ASSY METAL BODY NEB PE AANALYST - 8003-0820

MULTIMODE SAMPLE INTRO SYSTEM FOR PE ICP - 8003-0817

REACTOR 3-D 035 MM ID 2-FLANGED ENDS - 8003-0697

TUBING ASSY PTFE 175MM ID 450MM BLK - 8003-0696

TUBING ASSY PTFE 175MM ID 250MM BLK - 8003-0695

TUBING ASSY PTFE 035MM ID 60MM WHT - 8003-0691

TUBING PTFE 07 MM ID 1 M - 8003-0690

TUBING PTFE 035 MM ID 1 M - 8003-0688

PERI-PUMP TBG F/SOLV3STOP 114MM W/W PK12 - 8003-0687

PERI-PUMP TUBING3STOP 318MM BLK/WHT PK12 - 8003-0686

PERI-PUMP TUBING3STOP 206MM VIO/VIO PK12 - 8003-0685

TUBING PERIPUMP 3STOP 076MM BLK/BLK PK12 - 8003-0682

SAMPLE LOOP 1000 UL - 8003-0681

SAMPLE LOOP 200 UL - 8003-0679

TOOL FOR SCREW CONNECTORS - 8003-0675

MIXNG MANIFOLD F/GLASS GAS/LIQ SEPARATOR - 8003-0674

PTFE MEMBRANE 50PK - 8003-0673

SCREW PLUG - 8003-0667

ADAPTER 1/4IN EXT THREAD 28MM OD NIPPLE - 8003-0664

T-PIECE W/NIPPLES 35 TO 45MM ID TUBES - 8003-0662

CONNECTOR FOR 24 TO 32MM ID TUBES - 8003-0659

NIPPLES- CONNECT TUBES TO PRECONCEN ACC - 8003-0658

07 MM OD PT/LR CAPILLARY NIPPLE - 8003-0657

33 MM OD NIPPLE - 8003-0654

CAPILLARY TUBING S/S PROBE 06MM ID FIAS - 8003-0620

TUBE FITTING - 8003-0594

FERRULE FRONT 1/4 IN - 8003-0592

ORING FOR TYPE II TORCH - 8003-0591

MICROMIST NEB (GLASS) U-SERIES 02ML/MIN - 8003-0589

MOUNTING FOR CYCLONIC SPRAY CHAMBER - 8003-0588

ALUMINIUM GASKET FOR NEXION SAMPLER CONE - 8003-0584

O-RING SKIMMER CONE ELAN 9000/6X00 PK5 - 8003-0583

O-RING FOR HYPER SKIMMER CONE PE NEXION - 8003-0580

CASSETTE LENS SHADOW STOP - 8003-0566

ION LENS SERIES II ELAN 9000/6X00/DRCS - 8003-0564

POWER AMPLIFIER TUBE (CERAMIC) PE ICP-MS - 8003-0560

CASSETTE TORCH MOUNT (EXCL TORCH / INJ) - 8003-0556

TWIST-TYPE TORCH INJ SUPPORT ADAPTER - 8003-0555

PFA/PT CASS-TYPE TORCH INJ 20MM ID - 8003-0554

TORCH DEMOUNTABLE QUARTZ FOR PE ICP-MS - 8003-0552

O-RING INJ SUPPT ADAPT INT TWIST/CASS - 8003-0551

INJ SUPPORT ADAPTER TWIST-TYPE W/O-RINGS - 8003-0546

INJ SUPPORT ADAPTER TWIST-TYPE TORCH - 8003-0545

INJECTOR QUARTZ B/JOINT 15MM ID ICP-MS - 8003-0534

INJECTOR QUARTZ B/JOINT 20MM ID ICP-MS - 8003-0533

INJECTOR INERT ALUMINA 085MM ID ICP-MS - 8003-0532

RETAINING RING FOR SCOTT SPRAY CHAMBER - 8003-0524

O-RING BAFFLED GLASS CYCLONIC S/CHAMBER - 8003-0516

S/CHAMBER GLASS BAFFLE+BALL JOINT NEXION - 8003-0514

SAMPLE CAPILLARY PTFE 0020IN ID NEB - 8003-0504

MICROMIST NEB (GLASS) U-SERIES 04ML/MIN - 8003-0489

END CAP CROSS-FLOW II GEMCLEAN NEBULIZR - 8003-0487

CONCENTRIC GLASS NEB C05 05 ML/MIN - 8003-0479

SS SMPL LOOP 100UL WPS-3000SL/RS 1PK TMO - 8002-0807

TI FILTR FRIT INLINE FILTR 2UM 1PK TMO - 8002-0806

CL PHARMED TUBING 16X180MM LPG-3X00 TMO - 8002-0803

BLIND NUT FS-8 ULTIMATE3000 1PK TMO - 8002-0802

DEUTERIUM LAMP PDA-100 AD-25 TMO - 8002-0704

LAMP D2 LONG LIFE UVD-3000 TMO - 8002-0702

DEUTERIUM LAMP UVD160320 UVD170340 TMO - 8002-0701

VSPL RTR SEAL ASI-100 7010/7000/7040 TMO - 8002-0602

CL M6 FLANGELESS NUT LC-2010 SHM - 8001-0813

SS SMPL LOOP 100UL LC2010/SIL-HT 1PK SHM - 8001-0809

ETFE TUBE 16MMIDX08MMODX3M LC-2010 SHM - 8001-0807

SS MALE NUT 16MN W6 SIL-10ADVP/20AC SHM - 8001-0806

SS MALE NUT 16MN SIL-20AC LC-20AD/T SHM - 8001-0805

DEUTERIUM LAMP LC-2010 LC-2010HT SHM - 8001-0704

DEUTERIUM LAMP SPD-M10AVP SPD-M20A SHM - 8001-0701

O-RING LC-10AD/ATVP LC-2010/HT 1PK SHM - 8001-0614

ROTOR SS SURROUND 6V ASSY SIL-10ADVP SHM - 8001-0603

LiChrospher® HPLC Columns, Agilent Technologies - 79925SI-584

LiChrospher® HPLC Columns, Agilent Technologies - 79925SB-564

Purospher® HPLC Columns, Agilent Technologies - 79925PU-564

LiChrospher® HPLC Columns, Agilent Technologies - 79925OD-584

ChiraDex HPLC Columns, Agilent Technologies - 79925CB-584

KIT WINDOW CELL SCREW W/2 QUARTZ WINDOWS - 79883-68703, Flow cell window/screw assembly, includes 2 quartz windows, 2 compression washers, 2 window holders, 2 window screws and 10 washers

CrossLab Solvent Inlet Tubing and Filters for HPLC, Agilent Technologies - 79880-22711, Holmium oxide filter

CrossLab Capillaries for HPLC, Agilent Technologies - 79846-87605, Seat capillary

CAPILLARY STAINLESS STL 0.12X60MM RIGID - 79841-87610, Special capillary rigid, S/S, pre-swaged/pre-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - 79841-87609, Standard capillary, rigid, S/S, pre-swaged/pre-swaged

CrossLab Capillaries for HPLC, Agilent Technologies - 79835-87638, Standard capillary, S/S, pre-swaged/pre-swaged

CrossLab Tools for HPLC, Agilent Technologies - 79835-87330, Solvent mixer, stainless steel

CrossLab Other Tubing for ICP-OES, Agilent Technologies - 7910051590, Transfer tube, FEP, for axial ICP with cyclonic and inert Sturman-Masters spray chambers. Compatible with 700 series; Vista series

POWDER CELL HOLDER SET EXT DRA - 7910047700

CENTER MOUNT HOLDER CLIP STYLE EXT DRA - 7910047600

VARIABLE ANGLE TRANS HOLDER EXT DRA - 7910047400

SMALL SPOT KIT EXT DRA - 7910047200

TORCH BODY FULLY DEMOUNTABLE RADIAL ICP - 7910044500

CENTER MOUNT CUVETTE HOLDER EXT DRA - 7910038700

REPLACEABLE PROBE TIP TORLON 40 MM 1/PK - 7910034500

TEST TUBE HOLDER CARY 50/60 1/PK - 7910033500

ESD WRIST STRAP DISPOSABLE - 7910031300

Crosslab ZORBAX, Agilent Technologies - 770995-902

Crosslab ZORBAX, Agilent Technologies - 765973-902

Crosslab ZORBAX, Agilent Technologies - 763750-902

Magnetic Stir Bars, Agilent Technologies - 7418000400, Magnetic stirrer bar, PTFE, star type

Crosslab ZORBAX, Agilent Technologies - 735700-902

GRAPHITE TUBE ALIGNMENT TOOL 1/PK - 7210034200

NEBULIZER CAPILLARY EXTRACT TOOL 1/PK - 7210027600

SCREWDRIVER 4 MM DIA X 75 LG 1/PK - 7210001600

CrossLab Tubing, Agilent Technologies - 7157-0210, Tubing

Accessories for GC Capillary Columns, Agilent Technologies - 707-0027, Mirror, to examine column ends for proper cuts

CrossLab Specialty LC Columns , Agilent Technologies - 702111651, Ultron

BASE PLATE VGA77 AA HYDRIDE MODULE 1/PK - 7010017200

O-RING SCREW BEAD ADJUSTER ORGANIC SOLV - 6910036900

O-RING SPRAY CHAMBER MARK 7 PERFLOUR 1/P - 6910036800

O-RING FL S/C BUNG 1 IDX1-3/16ODX3/32 IN - 6910015200

O-RING NITRILE 1-13/16ID X 2OD X 3/32 IN - 6910012600

O-RING NITRILE 1-1/8ID X 1-1/4OD X1/16IN - 6910010400

Crosslab O-Rings and Fittings for ICP-OES, Agilent Technologies - 6910001200, O-ring for nebulizer inlet of single and double-pass spray chamber, 6.35 mm Int. Ø 9.53 mm, Ext. Ø. Compatible with 700 series; Vista series; Liberty; Cary 4000; Cary 5000; Cary 6000; All Agilent AA systems

CrossLab O-Rings for Spray Chambers, Agilent Technologies - 6910000100, O-ring screw bead adjuster, nitrile, ¹/8 IN. int.Ø, ¹/4 IN. ext.Ø, ¹/16 IN. thick

Crosslab Cylindrical Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 6618000600, Cylindrical cell, single filling port, supplied with 1 PTFE stopper, 19 mm internal diameter. Suits all Agilent UV-Vis spectrophotometers. Requires a cylindrical cell holder

CrossLab Sample Racks and Overlays, Agilent Technologies - 6610025400, Sample rack for 15 ml, 16 mm ext. Ø. tubes, 60 positions

SPILL TRAY440 SPS31/PK - 6610025100

Crosslab Disposable Polystyrene Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 6610018800, Rectangular macro cell, disposable, open top. For use over wavelength range from 340 - 800 nm with all Agilent UV-Vis spectrophotometers

Crosslab Macrocells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 6610016100, Rectangular macro cell, open top with PTFE lid supplied. Suits all Agilent UV-Vis spectrophotometers

GRAPHITE ELECTRODES FOR GTA 120 1 PAIR - 6310003400

GRAPHITE SHROUD ZEEMAN GFAA 1/PK - 6310001900

GRAPHITE SHROUD DEUTERIUM GFAA 1/PK - 6310001800

GRAPHITE ELECTRODES ZEEMAN GFAA 1 PAIR - 6310001700

GRAPHITE ELECTRODES DEUTERIUM GFAA 1 PR - 6310001600

GRAPHITE PYROLYTIC PLATFORMS 10/PK - 6310001300

GRAPHITE TUBES PLATEAU COATED 10/PK - 6310001100

12 PORT RACK FOR 16MM X 100MM TUBES - 5982-9117

12 PORT RACK FOR 16MM X 75MM TUBES - 5982-9116

12 PORT RACK FOR 13MM X 100MM TUBES - 5982-9115

12 PORT RACK FOR 13MM X 75MM TUBES - 5982-9114

GLASS CHAMBER FOR 12 PORT SPE MANIFOLD - 5982-9113

SEALING GASKET FOR 12 PORT SPE MANIFOLD - 5982-9112

WHITE COVER FOR 12 PORT SPE MANIFOLD - 5982-9111

Vacuum Manifold Processing Stations for SPE cartridges, Agilent Technologies - 5982-9110, Vacuum manifold processing station for SPE cartridges, 12 port, (includes rack for 16×100 mm tubes)

SPE MANIFOLD VACUUM GAUGE ASSY W/ VALVE - 5982-9108

SPE MANIFOLD EXIT VALVE REPLACEMENT KIT - 5982-9107

SPE MANIFOLD BALL RING/VACUUM QUICK RLS - 5982-9106

SPE MANIFOLD MALE LUER PLUG PK25 - 5982-9104

SPE MANIFOLD SHORT VALVE STOPCOCK 20/PK - 5982-9102

BARCODE LABELS 0001-1000 1000/PK PK1000 - 5958-9450

LABEL BARCODE 5001 TO 6000 1000/PK - 5958-9445

LABEL BARCODE 4001 TO 5000 1000PK - 5958-9444

LABEL BARCODE 3001 TO 4000 1000/PK - 5958-9443

BARCODE LABELS 2001-3000 1000PK PK1000 - 5958-9442

BARCODE LABELS 1001-2000 1000/PK PK1000 - 5958-9441

WINDOW ETCHING TOOL 3/PK - 590-3003

TUBE AND CAP CENTRIFUGE 15ML PK50 - 5610-2039

Crosslab Single Element Hollow Cathode Lamps, Agilent Technologies - 5610124800, Lead (Pb) uncoded single element hollow cathode lamp, for all AAS instruments with octal base connector

Crosslab Single Element Hollow Cathode Lamps, Agilent Technologies - 5610124000, Gold (Au) uncoded single element hollow cathode lamp, for all AAS instruments with octal base connector

Crosslab Multi-Element Hollow Cathode Lamps, Agilent Technologies - 5610107600, Cobalt/chromium/copper/iron/manganese/nickel (Co/Cr/Cu/Fe/Mn/Ni) coded multi-element hollow cathode lamp

Crosslab Single Element Hollow Cathode Lamps, Agilent Technologies - 5610102900, Lead (Pb) coded single element hollow cathode lamp

Crosslab Single Element Hollow Cathode Lamps, Agilent Technologies - 5610102700, Iron (Fe) coded single element hollow cathode lamp

Crosslab Single Element Hollow Cathode Lamps, Agilent Technologies - 5610102100, Gold (Au) coded single element hollow cathode lamp

Crosslab Single Element Hollow Cathode Lamps, Agilent Technologies - 5610101400, Copper (Cu) coded single element hollow cathode lamp

CAPILLARY STAINLESS STEEL 0.12 X 800 MM - 5500-1272, Standard capillary, SL/M4, pre-swaged/pre-swaged

CAPILLARY SS 0.17 X 130MM S/SX PS/PS - 5500-1253, Standard capillary, S/SX, pre-swaged/pre-swaged

CAPILLARY STAINLESS STEEL 0.17X400 MM - 5500-1252, Standard capillary, SL/SL, non-swaged/pre-swaged

CAPILLARY STAINLESS STL 0.12X400MM LONG - 5500-1251, Standard capillary, SL/SL, non-swaged/pre-swaged

CAPILLARY ST 0 17 X 120MM SL/SL - 5500-1250, Standard capillary, SL/SL, non-swaged/pre-swaged

CAPILLARY ST 012 X 120MM SL/SL - 5500-1249, Standard capillary, SL/SL, non-swaged/pre-swaged

QUICK CONNECT CAPILLARY SS 0.12 X 120MM - 5500-1247, Quick Connect capillary, none/SX, -/pre-swaged

CAPILLARY SS 0.17 X 400MM SI/SI - 5500-1245, Standard capillary, SI/SI, pre-swaged/pre-swaged

CAPILLARY SST 0.12X30MM RIGID FPR 1290 - 5500-1242, Special capillary for inline filter, rigid, SI/special, non-swaged/-

CAPILLARY STAINLESS STL 0.17X105MM SL/SL - 5500-1240, Standard capillary, SL/SL, pre-swaged/pre-swaged

CAPILLARY STAINLESS STL 0.12X105MM SL/SL - 5500-1238, Standard capillary, SL/SL, pre-swaged/pre-swaged

QUICK TURN CAPILLARY SS 0.17X380MM - 5500-1235, Quick Turn capillary

QUICK TURN CAPILLARY SS 0.12 X 180MM - 5500-1233, Quick Turn capillary

QUICK TURN CAPILLARY SS 0.075 X 150MM - 5500-1232, Quick Turn capillary

QUICK CONNECT CAPILLARY SS 0.17 X 280MM - 5500-1230, Quick Connect capillary, none/SL, -/non-swaged

QUICK TURN CAPILLARY SS 0.075X500MM - 5500-1205, Quick Turn capillary

CAPILLARY SS 0.12 X 280MM SL/M4 - 5500-1203, Standard capillary, SL/M4, pre-swaged/pre-swaged

CAPILLARY SS 0.12 X 500MMM4/SL - 5500-1202, Standard capillary, M4/SL, pre-swaged/pre-swaged

CAPILLARY SS 0.12 X 105MM SL/NONE - 5500-1201, Standard capillary, SL/none, pre-swaged/-

QUICK TURN CAPILLARY SS 0.12X130MM - 5500-1200, Quick Turn capillary, none/M4, -/pre-swaged

CAPILLARY SS 0.12 X 130MMM4/SL - 5500-1199, Standard capillary, SL/M4, pre-swaged/pre-swaged

QUICK TURN CAPILLARY SS 0.075 X 105MM - 5500-1198, Quick Turn capillary

QUICK TURN CAPILLARY SS 0.17 X 500MM - 5500-1197, Quick Turn capillary

QUICK TURN CAPILLARY SS 0.17 X 280MM - 5500-1196, Quick Turn capillary

QUICK TURN CAPILLARY SS 0.17 X 150MM - 5500-1194, Quick Turn capillary

QUICK TURN CAPILLARY SS 0.12 X 500MM - 5500-1192, Quick Turn capillary

QUICK TURN CAPILLARY SS 0.12 X 200MM - 5500-1190, Quick Turn capillary

QUICK CONNECT CAPILLARY SS 0.17 X 150MM - 5500-1183, Quick Connect capillary, none/SL, -/non-swaged

QUICK CONNECT CAPILLARY SS 0.17 X 150MM - 5500-1182, Quick Connect capillary, none/SX, -/non-swaged

QUICK CONNECT CAPILLARY SS 0.17 X 105MM - 5500-1181, Quick Connect capillary, none/SX, -/non-swaged

QUICK CONNECT CAPILLARY SS 0.12 X 280MM - 5500-1170, Quick Connect capillary, none/SL, -/non-swaged

DISC CAROUSEL PSD 120 130 SAMPLES 1/PK - 5410046300

ROTOR-2PS-6PT-NP - 5320-0010

Bond Elutâ„¢ C18 SPE Cartridges, Agilent Technologies - 52113024, 10 ml, LRC cartridge

REPLACEMENT GUARD FOR CLOSURE TOOL - 5191-5930

A-LINE HP E-CRIMPERPWR SUPNOJAWS - 5191-5617

CrossLab Interface Cone Supplies for ICP-MS, Agilent Technologies - 5190-9614, ICP-MS Interface cone magnifier, 10× magnification with LED illumination and measuring scale

CrossLab ADM Flow Meter, Agilent Technologies - 5190-9578, TCD adapter, for flow meter

Intuvo Gaskets, Agilent Technologies - 5190-9074, Gasket plug, Intuvo

CHEMICAL IONIZATION GAS PURIFIER - 5190-9071

Captiva Syringe Filters, Agilent Technologies - 5190-5271, Captiva Econofilter, dark blue, pH 2 - 13

Captiva Syringe Filters, Agilent Technologies - 5190-5269, Captiva Econofilter, dark blue, pH 2 - 13

Captiva Syringe Filters, Agilent Technologies - 5190-5268, Captiva Econofilter, light blue, pH 1 - 14

Captiva Syringe Filters, Agilent Technologies - 5190-5267, Captiva Econofilter, light blue, pH 1 - 14

Captiva Syringe Filters, Agilent Technologies - 5190-5266, Captiva Econofilter, light blue, pH 1 - 14

Captiva Syringe Filters, Agilent Technologies - 5190-5265, Captiva Econofilter, light blue, pH 1 - 14

Captiva Syringe Filters, Agilent Technologies - 5190-5264, Captiva Econofilter, purple, pH 1 - 12

Captiva Syringe Filters, Agilent Technologies - 5190-5262, Captiva Econofilter, purple, pH 1 - 12

Captiva Syringe Filters, Agilent Technologies - 5190-5261, Captiva Econofilter, purple, pH 1 - 12

CrossLab Inlet Liners for Agilent GC Instruments, Agilent Technologies - 5190-5112-025, Inlet liner, splitless, UI, Low-Frit

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-3172, Inlet liner, Ultra Inert, split, straight, glass wool

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-3168, Inlet liner, Ultra Inert, split, straight, glass wool

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-3166, Inlet liner, Ultra Inert, splitless, single taper

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-3162, Inlet liner, Ultra Inert, splitless, single taper

CrossLab Dimpled Liners for GC, Agilent Technologies - 5190-2297, Inlet liner, Ultra inert, splitless, dimpled, single taper

CrossLab Ultra Inert Liners for GC, Agilent Technologies - 5190-2292, Inlet liner, Ultra Inert, splitless, single taper

LINERSPLITLESS2 TAPERNO WOOL 100/PK - 5190-2272

25 ML FRIT SPARGE GLASSWARE KIT ATOMX - 5190-2232

25 ML FRITLESS SPARGE GLSSWARE KIT ATOMX - 5190-2231

Instrument Supplies for LC/MS, Agilent Technologies - 5190-1442, Precision tubing cutter for ¹/16 IN. stainless steel tubing

CrossLab Column Nuts for GC, Agilent Technologies - 5190-1438, Ferrule, low thermal mass, column int.Ø 0.32 mm, 0.5 mm int.Ø, valcon polyimide/graphite, max. 350 °C

CrossLab Column Nuts for GC, Agilent Technologies - 5190-1437, Ferrule, low thermal mass, column int.Ø up to 0.25 mm, 0.4 mm int.Ø, valcon polyimide/graphite, max. 350 °C

CrossLab Detectors for ICP-MS, Agilent Technologies - 5190-0108, Electron multiplier detector

Purge and Trap Supplies, Agilent Technologies - 5188-8820, Trap, VOCARB 3000

CrossLab Flow Through Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5188-8005, Flow cell, rectangular aperture, M6 threaded inlet and outlet ports

CrossLab CTC GC Autosampler Supplies, Agilent Technologies - 5188-6597, Wash vial kit for CTC Standard Wash Station, includes 10 each of: 10 ml vial, 20 mm Wash snap cap, 20 mm PTFE/silicone septa

Inlet Convenience Kits, Agilent Technologies - 5188-6498, QuickPick purged packed inlet PM kit

Inlet Convenience Kits, Agilent Technologies - 5188-6497, QuickPick splitless inlet/vent PM kit

Inlet Convenience Kits, Agilent Technologies - 5188-6496, QuickPick split vent and inlet PM kit

Inlet Convenience Kits, Agilent Technologies - 5188-6494, QuickPick splitless inlet PM kit

Inlet Convenience Kits, Agilent Technologies - 5188-6493, QuickPick split inlet PM kit

INSULATION KIT 3 PIECES PK3 - 5188-5241

CrossLab Split Liners for GC, Agilent Technologies - 5183-4713, Inlet liner, split, single taper, glass wool, deactivated

CrossLab Direct Connect Liners for GC, Agilent Technologies - 5183-4709, Inlet liner, direct, straight, 1.5 mm int.Ø., for gas samples, headspace, purge and trap

CrossLab Splitless Liners for GC, Agilent Technologies - 5183-4705, Inlet liner, splitless, double taper, deactivated

CrossLab Splitless Liners for GC, Agilent Technologies - 5183-4704, Inlet liner, splitless, straight, deactivated, quartz

CrossLab Splitless Liners for GC, Agilent Technologies - 5183-4703, Inlet liner, splitless, straight, deactivated, quartz

CrossLab Split Liners for GC, Agilent Technologies - 5183-4702, Inlet liner, split, single taper, glass wool, deactivated, low pressure drop

CrossLab Split Liners for GC, Agilent Technologies - 5183-4700, Inlet liner, split, straight, with cup (for manual injections), glass wool

CrossLab Split Liners for GC, Agilent Technologies - 5183-4699, Inlet liner, split, straight, with cup (for manual injections), glass wool

CrossLab Split Liners for GC, Agilent Technologies - 5183-4697, Inlet liner, split, straight, with cup, glass wool and packing (for manual injections)

CrossLab Splitless Liners for GC, Agilent Technologies - 5183-4696, Inlet liner, splitless, single taper, deactivated

CrossLab Splitless Liners for GC, Agilent Technologies - 5183-4695, Inlet liner, splitless, single taper, deactivated

CrossLab Splitless Liners for GC, Agilent Technologies - 5183-4694, Inlet liner, splitless, single taper, glass wool, deactivated

CE REPL BLADE KIT FOR CE COLUMN CUTTER - 5183-4670

CrossLab CE and CE/MS Tools, Agilent Technologies - 5183-4669, CE column cutter with diamond blade

MICRO GC REPLACEMENT FILTERS 5/PK - 5183-4652

Integrator Supplies and Cables, Agilent Technologies - 5183-4649, Crossover ethertwist cable

CrossLab Gas Cylinder Supplies, Agilent Technologies - 5183-4645, Regulator, 2-stage, brass, CGA590, industrial air, 1/8 IN., 125 psi

2 STG RGLTRBRS125PSICGA5401/8INFTTG - 5183-4643

CrossLab Gas Cylinder Supplies, Agilent Technologies - 5183-4642, Regulator, 2-stage, brass, CGA350, H2, argon/methane, 1/8 IN., 125 psi

CrossLab Gas Cylinder Supplies, Agilent Technologies - 5183-4641, Regulator, 2-stage, brass, CGA346, air, ¹/8 IN., 125 psi

Fused Silica Tubing Cutters, Agilent Technologies - 5183-4620, Column cutter, with rotating diamond blade

HP5973 W/DIFFUSION PUMP 1 YR MAINT KT - 5183-2096

Crosslab Programmable Temperature Vaporizing (PTV) Inlet for GC, Agilent Technologies - 5183-2038, Inlet liner, PTV, 2.0 mm Int. Ø, 3 mm, Ext. Ø.0.71 mm length, 180 µl, single baffle, glass wool, deactivated

Nitrogen Phosphorus Detector (NPD) Supplies, Agilent Technologies - 5183-2007, NPD black ceramic bead assembly

VITON SEAL FOR SLH SEPTUMLESS HEAD 5/PK - 5182-9775

FERRULE GRAPHPACK 2M PTV 053 COLUMN PK10 - 5182-9770

CrossLab Programmable Temperature Vaporizing (PTV) Inlet for GC, Agilent Technologies - 5182-9769, Ferrules, Graphpak 2M inlet, for 0.32 mm columns

Crosslab Programmable Temperature Vaporizing (PTV) Inlet for GC, Agilent Technologies - 5182-9768, Ferrules, Graphpak 2M inlet, for 0.25 mm columns

Programmable Temperature Vaporizing (PTV) Inlet, Agilent Technologies - 5182-9763, Silver seal for Graphpak-2M adapter

Programmable Temperature Vaporizing (PTV) Inlet, Agilent Technologies - 5182-9761, Graphpak-2M adapter for 320/250 um Int.Ø

SEALING ELEMENT FOR SLH - 5182-9760

Programmable Temperature Vaporizing (PTV) Inlet, Agilent Technologies - 5182-9759, Kalrez seal for SLH

VALVE BODY FOR SLH - 5182-9757

FERRULE GRAPHPACK 2M PTV 02 COLUMN PK10 - 5182-9756

GRAPHPACK-2M CONNECTOR 02MM - 5182-9754

EMPTY INSERTS WITH SWIRL HOLES 10/PK - 5182-9751

Programmable Temperature Vaporizing (PTV) Inlet, Agilent Technologies - 5182-9748, PTFE Guide for SLH

Programmable Temperature Vaporizing (PTV) Inlet, Agilent Technologies - 5182-9747, Service kit for SLH

Nitrogen Phosphorus Detector (NPD) Supplies, Agilent Technologies - 5182-9722, NPD ceramic insulator kit, for 7890, 6890, 6850 GC nitrogen phosphorus detector

CrossLab Thermal Conductivity Detector (TCD), Agilent Technologies - 5182-9677, Ferrule, front, for 0.25, 0.2, 0.1 mm int.Ø columns, 15% graphite/85% Vespel, max. 350 °C

CrossLab Thermal Conductivity Detector (TCD), Agilent Technologies - 5182-9676, Ferrule, front, for 0.32 mm int.Ø columns, 15% graphite/85% Vespel, max. 350 °C

CrossLab Thermal Conductivity Detector (TCD), Agilent Technologies - 5182-9673, Ferrule, front, for 0.53 mm int.Ø columns, 15% graphite/85% Vespel, max. 350 °C

CrossLab In-line Gas Purifiers, Agilent Technologies - 5182-9411, 6 cc, Glass moisture trap, indicating, ¹/4 IN., 100 psig, 20 ppb substance concentration

CrossLab In-line Gas Purifiers, Agilent Technologies - 5182-9402, 45 cc, Glass oxygen trap, indicating, stainless steel, ¹/4 IN., 100 psig, 5 ppb substance concentration

CrossLab In-line Gas Purifiers, Agilent Technologies - 5182-9401, 45 cc, Glass oxygen trap, indicating, ¹/4 IN., 100 psig, 5 ppb substance concentration

CrossLab In-line Gas Purifiers, Agilent Technologies - 5182-9201, 45 cc, Glass oxygen trap, indicating, ¹/8 IN., 100 psig

CrossLab Thermal Conductivity Detector (TCD), Agilent Technologies - 5182-3477, TCD back ferrule, 0.8 mm int.Ø, for ¹/8 IN. inlet

Instrument Supplies for LC/MS, Agilent Technologies - 5182-3466, Screwdriver, Torx T10

Instrument Supplies for LC/MS, Agilent Technologies - 5182-3465, Screwdriver, Torx T20

CrossLab Merlin Microseal for GC, Agilent Technologies - 5182-3445, Merlin Microseal 100 psi nut, max. 400 °C

Crosslab Merlin Microseal for GC, Agilent Technologies - 5182-3442, Merlin Microseal starter kit, stainless steel, general purpose (100 psi), includes nut and Microseal. Max. 400 °C

CBL-ASSY MULTI-COND-9 26AWG 15-FT GRAY - 5182-2581

FRIT SPGR KIT W/FITTING 5 ML STAT/VEL - 5182-0946

CrossLab Purge and Trap Supplies for GC, Agilent Technologies - 5182-0852, Glass, frit sparger, 5 ml, ¹/2 IN.

25ML FRIT SPARGER (GLASSWARE ONLY) - 5182-0851

5ML FRITLESS SPARGER (GLASSWARE ONLY) - 5182-0850

25ML FRITLESS SPARGER (GLASSWARE ONLY) - 5182-0849

25ML SPARGER KIT - 5182-0845

CrossLab Headspace Vials and Caps, Agilent Technologies - 5182-0840, 20 ml, Certified headspace crimp top vial convenience pack, flat bottom

NEEDLE 5UL RN 23 GA PTHP 3/PK - 5182-0830

25ML FRITLESS SPARGER KIT - 5182-0796

TRAP VOCARB 3000 7695 AND 3100 P+T - 5182-0775

Replacement Plungers for Autosampler Syringes, Agilent Technologies - 5181-3358, ALS syringe plunger, for 10 µl removable needle syringe, PTFE-tip

Crosslab Vespel Ferrules for GC, Agilent Technologies - 5181-3322, Capillary ferrule, 0.4 mm Int.Ø, Vespel, 0.1 - 0.25 mm column, maximum 280 °C

CrossLab Splitless Liners for GC, Agilent Technologies - 5181-3316I, Inlet liner, splitless, single taper, inert

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - 5181-3311, Wave spring washer

Crosslab Graphite/Vespel Ferrules for GC, Agilent Technologies - 5181-3308, Ferrule, no-hole, 15% graphite/85% Vespel, maximum 350 °C

Closures for 2 ml Crimp/Snap Top Vials, Agilent Technologies - 5181-1513, Snap caps

Closures for 2 ml Crimp/Snap Top Vials, Agilent Technologies - 5181-1507, Snap caps, for chemical resistance

CrossLab Column Nuts for GC, Agilent Technologies - 5181-1292, Front ferrule, ¹/16 IN., Valco, one piece, stainless steel, max. 500 °C

CrossLab GC Fittings, Agilent Technologies - 5181-1291, Nut, ¹/16 IN., Valco, stainless steel

Integrator Supplies and Cables, Agilent Technologies - 5181-1219, Perforated paper, 8.5×11 IN. rolls, inkjet for agilent 3397A, 3396 series II, and 3396A/B/95/94

Closures for 2 ml Crimp Top Vials, Agilent Technologies - 5181-1212, Crimp cap, certified

O-RINGS UNGREASED 12/PK PK12 - 5180-4181

CrossLab Liner O-Rings for GC, Agilent Technologies - 5180-4173, Inlet liner o-ring, graphite, for splitless liner

Crosslab Liner O-rings for GC, Agilent Technologies - 5180-4168, Inlet liner O-ring, graphite, 6.35 mm Int.Ø, 9.63 mm out.Ø

Flame Ionization Detector (FID) Supplies, Agilent Technologies - 5180-4165, Silicone gaskets

General Laboratory Tool Kit, Agilent Technologies - 5180-4162, General laboratory tool kit

CrossLab GC Fittings, Agilent Technologies - 5180-4161, Fitting kit, brass, includes brass, nuts, ferrule, caps, plugs, unions, reducers, ¹/8 IN. and ¹/4 IN.

Crosslab GC Fittings, Agilent Technologies - 5180-4160, Tee, ¿ IN. brass

Flame Ionization Detector (FID) Supplies, Agilent Technologies - 5180-4153, Capillary inlet cleaning wires

Flame Ionization Detector (FID) Supplies, Agilent Technologies - 5180-4152, Wires 0.010 IN. Int.Ø/530 µm jet

Flame Ionization Detector (FID) Supplies, Agilent Technologies - 5180-4150, Cleaning wires 0.016 IN. Int.Ø jet

CrossLab Gas Cylinder Supplies, Agilent Technologies - 5180-4143, Adapter fitting, 1/4 IN. male NPT to 1/8 IN., brass

Crosslab GC Fittings, Agilent Technologies - 5180-4131, Reducing union, ¼ IN. female - ¿ IN. female, brass

CrossLab GC Fittings, Agilent Technologies - 5180-4129, Tee, ¹/4 IN., brass

CrossLab GC Fittings, Agilent Technologies - 5180-4128, Union, ¹/4 IN., brass

CrossLab GC Fittings, Agilent Technologies - 5180-4127, Union, ¹/8 IN., brass

CrossLab GC Fittings, Agilent Technologies - 5180-4124, Cap, ¹/8 IN., brass

CrossLab GC Fittings, Agilent Technologies - 5180-4121, Plug with nut, ¹/8 IN., brass

CrossLab Column Nuts for GC, Agilent Technologies - 5180-4115, Ferrule, back, ¹/8 IN., brass

CrossLab Column Nuts for GC, Agilent Technologies - 5180-4109, Front ferrule, front ¹/8 IN., brass

Crosslab GC Fittings, Agilent Technologies - 5180-4105, Nut, ¼ IN. brass

CrossLab GC Fittings, Agilent Technologies - 5180-4103, Nut, ¹/8 IN., brass

Supplies for Purged Packed Inlet, Agilent Technologies - 5080-8898, O-ring, Viton

CrossLab General Purpose Septa for GC, Agilent Technologies - 5080-8895, Inlet septa for 5880, 5890, 4890, 6850, 6890, 7890 GC's

Integrator Supplies and Cables, Agilent Technologies - 5080-8800, Thermal paper, blue print, for agilent 3390/92/93

CrossLab GC Fittings, Agilent Technologies - 5080-8751, Nut and ferrule set, ¹/8 IN., stainless steel

Crosslab GC Fittings, Agilent Technologies - 5080-8750, Nut and ferrule set, ¿ IN. brass

CrossLab General Purpose Septa for GC, Agilent Technologies - 5080-8728-50, Inlet septa, 3/8 IN., for 5700 series and 5830/40 GC's

O-RING 2-009/S455-70 SILICONE 12/PK PK12 - 5080-4982

MEMBRANE TUBE WITH FEMALE LOCKING LUER - 5069-4496

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 5068-0242, Rotor Seal, PEEK, 6 Column Selector

CrossLab Autosampler Valve Supplies for HPLC, Agilent Technologies - 5068-0232, Rotor seal, PEEK, valve DN, 1300 bar

CrossLab Autosampler Valve Supplies for HPLC, Agilent Technologies - 5068-0229, Rotor seal, PEEK, peripheral valve, 1300 bar

CrossLab Injection Valve Supplies for HPLC, Agilent Technologies - 5068-0215, Stator, 2-position/6-port injection Valve, 600 bar, stainless steel

ROTOR SEAL F/2-POS/10PORT VALVE PEEK - 5068-0207, Rotor seal, PEEK, for 2-position/6-port valve head, 1300 bar (5067-4241)

ROTOR SEAL F/2-POS/10PORT VALVE 1300BAR - 5068-0205, Rotor seal, PEEK, for 2-position/10-port valve head, 1300 bar (5067-4240)

ROTOR SEAL PEEK-1300BAR F/FLEXIBLE PUMP - 5068-0202, Rotor seal, PEEK, 1300 bar for Flexible Pump

ROTOR PEEK 1300 BAR F/2-POS/10PORT VALVE - 5068-0201, Rotor, PEEK, 1300 bar, for 1290 Infinity II high speed pump (G7120A)

ROTOR SEAL PEEK 8-COL SELECTOR 1300 BAR - 5068-0200, Rotor seal, PEEK, 8-column selector, 1300 bar

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 5068-0183, Rotor seal for stream selector valve, 600 bar

ROTOR 8POSITION/9PORT PURGE VALV 1200BAR - 5068-0123, Rotor, vespel, 8-position/9-port, purge valve, 1200 bar, for automatted purge valve quaternary pump 1290 Infinity series

CrossLab Autosampler Valve Supplies for HPLC, Agilent Technologies - 5068-0099, Rotor, PEEK, 2 position/6 port bio valve, 600 bar

ROTOR 6 COLUMN SELECTOR 600 BAR SS - 5068-0076, Rotor 6 column selector, PEEK, 600 bar

ROTOR 6-COLUMN SELECTOR 1200 BAR - 5068-0067, Rotor, vespel, 6-column selector, 1200 bar

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 5068-0060, Stator head, 2-position/6-port valve, ceramic, bio-inert (p/n 5067-4148), maxiumum pressure 600 bar

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 5068-0052, Rotor seal, PEEK, 600 bar

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 5068-0030, Rotor, vespel, 2 position/6 port, 1200 bar 1290 Infinity injector CTC

CrossLab Column Selection Valves and Supplies for HPLC, Agilent Technologies - 5068-0012, Rotor, vespel, 2 position/10 port, 1200 bar (17404 psi)

CrossLab Column Selection Valves and Supplies for HPLC, Agilent Technologies - 5068-0008, Rotor, vespel, 2 position/6 port, 1200 bar (17404 psi)

STATOR 2PS/6PT QC P: C/D - 5068-0006, Stator head, 2-position/6-port valve (p/n 5067-4117 or 5067-4241), maximum pressure 1300 bar, stainless steel

ROTOR SEAL 5 POSITION/7 PORT 1200 BAR. - 5068-0005, Rotor seal, vespel, 5 position/7 port 1200 bar, for automatted purge valve binary pump 1290 Infinity series

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 5068-0001, Stator, 8-position/9-port multipurpose valve, 1300 bar, stainless steel

CrossLab Maintenance Kits for HPLC, Agilent Technologies - 5067-6652, InfinityLab service tool kit, for Long Life and Easy Maintenance pump heads

CHECK VALVE ASSBLY INLET/OUTLET 50ML/MIN - 5067-6642, Check valve assembly, inlet/outlet, for G7161A/B preparative pump, with 50 ml/min pump head, for 1260 Infinity II and 1290 Infinity II Preperative Pumps

QUICK CONNECT/TURN ASSEMBLY 0.075X105MM - 5067-6602, Quick Connect capillary, Quick Connect/special

QUICK CONNECT ASSEMBLY 0.17X150MM - 5067-6167, Quick Connect capillary, Quick Connect/SX, pre-swaged/non-swaged

CAPILLARY SS 0.17MM ID 300MM S/SX - 5067-6129, Standard capillary, S/SX, pre-swaged/pre-swaged

BLANK NUT SS LONG LONG F/1/16IN SWAGELOK - 5067-6127, Blank nut, stainless steel, long, for ¹/16 IN. Swagelok fitting ports

PISTON CERAMIC LONG LIFE PUMPHEAD F/1290 - 5067-5975, Piston, ceramic

QUICK CONNECT ASSEMBLY 0.075X105MM - 5067-5961, Quick Connect capillary, Quick Connect/SX, pre-swaged/non-swaged

QUICK CONNECT ASSEMBLY 0.12X280MM - 5067-5960, Quick Connect capillary, Quick Connect/SL, pre-swaged/non-swaged

QUICK CONNECT ASSEMBLY 0.12 X 220 MM - 5067-5959, Quick Connect capillary, Quick Connect/SL, pre-swaged/non-swaged

InfinityLab Fittings, Agilent Technologies - 5067-5957, InfinityLab Quick Connect fitting Int.Ø: 0,12 mm, length 105 mm

EASY MAINTENANCE PUMP HEAD - 5067-5938, Piston, ceramic, for 1290 pump

UHP-FF FITTING BIO-INERT - 5067-5695, UHP-FF fitting, 1.6 mm Int.Ø, for bio-inert stainless steel cladded PEEK capillaries

CrossLab Tools for HPLC, Agilent Technologies - 5067-5688, Wrench, torque, 1 to 25 Nm, with 14 mm open wrench

CAPILLARY SS 0.17MM ID 120MM - 5067-5416, Standard capillary, S/SX, pre-swaged/pre-swaged

Crosslab Bottle Head Assemblies for HPLC, Agilent Technologies - 5067-5407, Filter assembly, in-line, 0.3 µm, 2 mm Int. Ø , stainless steel, for Agilent 1290 Infinity quaternary pump

Crosslab Degasser Supplies for HPLC, Agilent Technologies - 5067-5378, Inlet tubing kit, for Agilent 1260 Infinity Quaternary Pump VL

CAPILLARY SS 0.12 MM ID 250 MM SL/M - 5067-5113, Standard capillary, SL/M4, pre-swaged/non-swaged

CAPILLARY SS 0.17 MM 150 MM SWAGELOK - 5067-5111, Standard capillary, SV/M4, non-swaged/non-swaged

CAPILLARY SS 0.17 MM 340 MM SWAGELOK - 5067-5108, Standard capillary, SL/M4, pre-swaged/non-swaged

CAPILLARY SS 0.12 MM ID 280 MM SV/M - 5067-5107, Standard capillary, SV/M4, non-swaged/non-swaged

CAPILLARY SS 0.12 MM ID 150 MM SV/M - 5067-5104, Standard capillary, SV/M4, non-swaged/non-swaged

Crosslab Degasser Supplies for HPLC, Agilent Technologies - 5067-4798, Replacement vacuum chamber

CAPILLARY SS 0.17MM ID 90MM S-SX - 5067-4748, Standard capillary, S/SX, pre-swaged/pre-swaged

CAPILLARY SS 0.12 MM ID 250 MM SLV/M - 5067-4746, Standard capillary, SLV/M, non-swaged/non-swaged

CAPILLARY SS 0.12 MM ID 500 MM - 5067-4745, Standard capillary, SLV/M4, non-swaged/non-swaged

CAPILLARY SS 0.12 MM ID 340 MM - 5067-4744, Standard capillary, SLV/M4, non-swaged/non-swaged

UNION ZERO-DEAD-VOLUME BIO-INERT SS - 5067-4741, Zero-dead-volume union, 2.6 mm Int.Ø, bio-inert, stainless steel with PEEK insert, 10-32 to 10-32, female/female

CAPILLARY SS 0.12MM 130MM W/A NON-SWAGED - 5067-4735, Standard capillary, SV/M4, non-swaged/non-swaged

CAPILLARY STAINLESS STEEL 0.17MM ID 90MM - 5067-4724, Standard capillary, S/SX, non-swaged/non-swaged

CAPILLARY SS 0.17MM ID 340MM - 5067-4723, Standard capillary, S/SX, pre-swaged/non-swaged

CAPILLARY SS 0.17MM ID 280MM - 5067-4722, Standard capillary, SX/SX, non-swaged/non-swaged

CAPILLARY SS 0.17 MM ID 200 MM - 5067-4721, Standard capillary, SX/SX, pre-swaged/non-swaged

SAMPLE LOOP KIT SS 100 UL. - 5067-4710, 100 µl, Sample loop kit for G1367E, G4226A high performance autosampler

CrossLab Metering Device Supplies for HPLC, Agilent Technologies - 5067-4695, Piston, sapphire, slim base

CAPILLARY SS 0.12 MM 120 MM SWAGELOK - 5067-4688, Standard capillary, SX/SX, non-swaged/non-swaged

CAPILLARY SS 0.12 MM 90 MM SWAGELOK - 5067-4685, Standard capillary, S/SX, non-swaged/non-swaged

CAPILLARY SS 0.17 MM ID 600 MM - 5067-4670, Standard capillary, S/SL, pre-swaged/non-swaged

CAPILLARY SS 0.12 MM ID 220 MM - 5067-4660, Standard capillary, S/S, pre-swaged/non-swaged

CAPILLARY SS 0.17MM ID 450MM - 5067-4658, Standard capillary, S/S, pre-swaged/pre-swaged

CAPILLARY SS 0.17MM ID 300MM S/S PS/PS - 5067-4657, Standard capillary, S/S, pre-swaged/pre-swaged

CAPILLARY SS 0.12MM ID 200MM SX/S - 5067-4653, Standard capillary, S/SX, pre-swaged/pre-swaged

CAPILLARY SS 0.12MM ID 120MM - 5067-4652, Standard capillary, SX/SX, pre-swaged/pre-swaged

CAPILLARY SS 0.12 MM ID 280 MM SL/SX - 5067-4651, Standard capillary, SL/SX, non-swaged/pre-swaged

CAPILLARY SS 0.12 MM ID 150 MM SL/SX - 5067-4650, Standard capillary, SL/SX, non-swaged/pre-swaged

CAPILLARY SS 0.12MM ID 90MM SX/S - 5067-4649, Standard capillary, S/SX, pre-swaged/pre-swaged

CAPILLARY SS 0.17 X 700MM S/SX PS/PS - 5067-4648, Standard capillary, S/SX, pre-swaged/pre-swaged

CAPILLARY SS 0.12MM ID 340MM S/SX - 5067-4647, Standard capillary, S/SX, pre-swaged/pre-swaged

CAPILLARY SS 0.12MM X 30MM RIGID. - 5067-4637, Special capillary, rigid, S/special, non-swaged/-

SHUTOFF VALVE - 5067-4124

M4 FITTING SCREW SS PK6 - 5067-1558, M4 fitting screw, 0.8 mm Int.Ø, stainless steel, for ¹/32 IN. (0.8 mm) Ext.Ø capillary

M4 FITTING FERRULE SS PK6 - 5067-1557, M4 fitting ferrule, 0.8 mm Int.Ø, stainless steel, for ¹/32 IN. (0.8 mm) Ext.Ø capillary

FILTER ASSEMBLY IN-LINE 4.6MM 0.2UM - 5067-1553, Filter assembly, in-line, max 600 bar, 3 frits, 0.17×90 mm connecting capillary

FILTER ASSEMBLY IN-LINE 2.1MM 0.2UM - 5067-1551, Filter assembly, in-line, max 600 bar, 3 frits, 0.12×70 mm connecting capillary

SILICONE TUBING 1 MM ID 3 MM OD 5 M - 5065-9978, Silicone tubing, 1 mm Int.Ø., 3 mm Ext.Ø., 5 m length

SWAGELOK FITTING SS EXTRA LONG PK10 - 5065-9967, Swagelok fitting, 1.6 mm Int.Ø, stainless steel, extra long

FLEXIBLE CAPILLRY 0.12X500MM NO FITTINGS - 5065-9964, Standard capillary, no fittings

CAPILLARY TUBING STARTER KIT 0.17MM - 5065-9939, Capillary tubing starter kit

CAPILLARY CONNECTING SS 0.12MM ID 200MM - 5065-9935, Standard capillary, no fittings

CAPILLARY SS 0.17MM ID 600MM - 5065-9933, Standard capillary, no fittings

CAPILLARY SS 0.17MM ID 700MM - 5065-9932, Standard capillary, no fittings

Crosslab ZORBAX, Agilent Technologies - 5065-9913

Autosampler Kits, Agilent Technologies - 5065-4499, Extended PM kit for 1100/1050/1200 pumps

Autosampler Kits, Agilent Technologies - 5065-4498, Extended PM kit for G1313A, G1329A autosamplers

SWAGELOK FITTING PEEK F/1/16IN CAPY PK10 - 5065-4426, Swagelok fitting, 1.6 mm Int.Ø, PEEK, for ¹/16 IN. (1.6 mm) Ext.Ø capillary, mixed colors

CrossLab Fittings for HPLC, Agilent Technologies - 5065-4422, Swagelok fitting, PEEK, double-winged, 2-piece, for ¹/32 IN. (0.8 mm) ext.Ø capillary

CrossLab Solvent Bottles and Waste Cans for HPLC, Agilent Technologies - 5065-4421, Solvent bottle (GL45) clear glass, 2 L, 2 inlets, with cap

Fraction Collector Supplies, Agilent Technologies - 5065-4402, 96-deep well collection plates with glass inserts, caps, and septa, pre-assembled, 0.35 ml

CrossLab Metering Device Supplies for HPLC, Agilent Technologies - 5064-8293, Piston, sapphire, 40 µl

CrossLab Solvent Inlet Tubing and Filters for HPLC, Agilent Technologies - 5064-8273, Filter assembly, preparative, in-line, semi-prep, stainless steel, 12.7 mm, 0.5 µm pore size

CrossLab Instrument Supplies for LC, Agilent Technologies - 5064-8249, Wear Retainer for SFC/SFE

AR GAS CLEAN FILTER SEMICON APP 1/PK - 5064-8092

CARRIER GAS LINE CONNECTOR 4MM DIA TUBE - 5064-8078

TAG FOR TUBING IDENTIFICATION 10/PK - 5064-8033

WRENCH FOR VALVE MAINTENANCEISIS - 5064-8032

CrossLab ISIS (Integrated Sample Introduction System) Supplies for ICP-MS (7700/8800), Agilent Technologies - 5064-8028, Peristaltic pump tubing for ISIS-DS, PVC Tygon®, 2-stop, white/white tabs, 1.02 mm Int.Ø.. For use with ISIS-DS on Agilent 7500, 7700, 8800 ICP-MS

TUBING CLAMPS (SMALL 10/PK + LARGE 5/PK) - 5064-8027

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5064-8026, Adapter for peristaltic pump tubing connection to sample tubing, used on ISIS-DS, 1 pack of 2 pcs

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5064-8024, ISIS-DS, Ferrule, front and back, for 1.6 mm Ext.Ø. tubing. Suitable for ISIS-DS used with Agilent 7500 ICP-MS

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5064-8023, ISIS-DS, Nut, PTFE, for 1.6 mm ext.Ø. tubing

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5064-8022, ISIS-DS, Ferrule, front and back, for 3.0 mm ext.Ø. tubing

PTFE NUT FOR 3 MM OD TUBING 10/PK - 5064-8021

CrossLab ISIS (Integrated Sample Introduction System) Supplies for ICP-MS (7700/8800), Agilent Technologies - 5064-8020, ISIS-DS, Sample tubing, PTFE, 2 mm int.Ø., 3 mm ext.Ø., 5 m length

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5064-8019, ISIS, Union Joint

CROSS JOINTISIS - 5064-8018

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5064-8017, ISIS, Tee Joint

CrossLab ISIS (Integrated Sample Introduction System) Supplies for ICP-MS (7700/8800), Agilent Technologies - 5064-8016, ISIS-DS, Sample tubing, PTFE, 0.8 mm int.Ø., 1.6 mm ext.Ø., 5 m length

PERI PUMP TUBE TYGON 3-STOP ORG/ORG PK12 - 5064-8014

CrossLab Vacuum Pump Supplies for LC/MS, Agilent Technologies - 5063-9153, Odor Element for oil mist filter for Edwards E2M18 vacuum pump, 5pcs/pack

Crosslab Degasser Supplies for HPLC, Agilent Technologies - 5063-6599, Nuts, polyphenylene sulfilde (PPS), for ¹/8 IN. (3.2 mm) Ext. Ø tubing, 1/4-28 thread

Crosslab Degasser Supplies for HPLC, Agilent Technologies - 5063-6598, PTFE ferrule and stainless steel lock ring, for vacuum degasser, ¹/8 IN. (3.2 mm) Int. Ø

CrossLab Ultra-Microcells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5063-6577, Tray for 16 spectrophotometer cells with 10 mm pathlength

8-PORT VALVE FOR 8453 UV DISSOLUTION SYS - 5063-6575

CrossLab Flow Through Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5063-6573, Flow cell, oval aperture, M6 threaded inlet and outlet ports

FLOW CELL QUARTZ 1MM 40UL OVAL AP 1/PK - 5063-6570

CrossLab Semi-Microcells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5063-6561, Rectangular semi-micro cell, stopperered with PTFE stopper supplied, base thickness 3.2 mm, self-masking black walls

Crosslab Semi-Microcells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5063-6559, Rectangular semi-micro cell, open top with PTFE lid supplied, 4 mm aperture, base thickness 9 mm, self-masking black walls. Suits all Agilent UV-Vis spectrophotometers

SEMI-MICRO CELL OG 10MM 1ML OPEN 1/PK - 5063-6558

RECTANGULAR CELL UV 5MM 17ML STOP 1/PK - 5063-6557

RECTANGULAR CELL OG 20MM 7ML OPEN 1/PK - 5063-6551

RECTANGULAR CELL OG 10MM 35ML OPEN 2/P - 5063-6550

CrossLab Macrocells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5063-6549, Rectangular macro cell, open top with PTFE lid supplied

Accessories for Needle Assemblies, Agilent Technologies - 5063-6506, Finger caps

SIEVE FOR OUTLET VALVE PK10 - 5063-6505, Sieve for outlet valve G1312-60012

MANUAL INJECTION VALVE FOR G1328A - 5063-6502

10 PORT VALVE MAX TEMP 225 DEGREES C - 5062-9511

FITTING-VALVE 10-PORT 24-VDC - 5062-9510

CrossLab Gas and Liquid Sampling Valve Supplies, Agilent Technologies - 5062-9508, Replacement valve, 6-port, WE series, 400 psi/225 °C max, Nitronic 60

CrossLab Column Thermostat Accessories for HPLC, Agilent Technologies - 5062-8588, Column identification RFID tag

CrossLab Metering Device Supplies for HPLC, Agilent Technologies - 5062-8587, Piston, sapphire, 900 µl

Spare Parts for CE Systems, Agilent Technologies - 5062-8544, Electrode O-ring, silicone

SWAGELOK FITTING PEEK LONG F/1/16IN PK10 - 5062-8541, Swagelok fitting, 1.6 mm Int.Ø, PEEK, long, for ¹/16 IN. (1.6 mm) Ext.Ø capillary

CrossLab Accessory Kits for HPLC, Agilent Technologies - 5062-8535, VWD waste tubing assembly

CrossLab Tools for HPLC, Agilent Technologies - 5062-8519, Ferrule

CrossLab Fittings for HPLC, Agilent Technologies - 5062-8518, Nut, male, PTFE

Crosslab Graphite/Vespel Ferrules for GC, Agilent Technologies - 5062-3581, Ferrule, 0.5 mm Int.Ø, 2-hole, 15% graphite/85%Vespel, 0.32 mm column, maximum 350 °C

Crosslab Graphite/Vespel Ferrules for GC, Agilent Technologies - 5062-3580, Ferrule, 0.4 mm Int.Ø, 2-hole, 15% graphite/85%Vespel, 0.1 - 0.25 mm column, maximum 350 °C

Integrator Supplies and Cables, Agilent Technologies - 5062-3561, Z-fold paper, 8.5×11 IN. rolls for agilent 3397A, 3396 series II and 3396A/B/95/94

Crosslab Graphite/Vespel Ferrules for GC, Agilent Technologies - 5062-3538, Capillary ferrule, 0.8 mm Int.Ø, preconditioned 15% graphite/85% Vespel, 0.53 mm column, long, maximum 350 °C

COLUMN NUT GRAPHPACK FOR CIS PK5 - 5062-3525

Crosslab Graphite Ferrules for GC, Agilent Technologies - 5062-3516, Ferrule, 0.4 mm Int.Ø, 15% graphite/85% Vespel, 0.2 mm column

Crosslab Vespel Ferrules for GC, Agilent Technologies - 5062-3513, Capillary ferrule, 0.5 mm Int.Ø, Vespel, 0.32 mm column, maximum 280 °C

Crosslab Vespel Ferrules for GC, Agilent Technologies - 5062-3511, Capillary ferrule, 0.8 mm Int.Ø, Vespel, 0.45 - 0.53 mm column, maximum 280 °C

Crosslab Ultra-Microcells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5062-2496, Rectangular ultra-micro cell, stoppered with PE stopper supplied, self-masking black walls, 2.5×2 mm aperture, 50 µl cell, z height 15 mm. Compatible with Agilent 8453/8454 and Cary 3500 UV-Vis spectrophotometers

PISTON SEAL VESPEL FOR HP1090 PK4 - 5062-2494, Piston seal, Vespel, for HP1090

AdvanceBio Amino Acid Analysis (AAA), Agilent Technologies - 5062-2478, Amino acids supplement kit (6 amino acids Sarcosine, L-Trytophan, L-Norvaline, L-Glutamine, L-Asparagine, L-4-Hydroxyproline)

SUPPORT RING FOR 1050 SEAL WASH OPTION - 5062-2465

WASTE TUBING 5M 6.5MM CORRUGATED PE - 5062-2463, Waste tubing

PTFE TUBING 0.7 MM ID 1.6 MM OD 5 M - 5062-2462, PTFE tubing, 1.6 mm Ext. Ø, 0.7 m Int. Ø and 5 m length

TUBING PTFE 5 M 1.5 MM ID - 5062-2461, Tubing

O-RING 12/PK FLUOROELASTOMER 1239INID - 5061-5890

INNER WINDOW O-RING 12/PK - 5061-5886

WASHERS 0.375 INCH OD 12/PK PK12 - 5061-5869

O-RING FPD 2-009 FPM PK12 - 5061-5867

CrossLab Flow Through Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3398, Flow cell, rectangular aperture, M6 threaded inlet and outlet ports

CrossLab Flow Through Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3397, Flow cell, rectangular aperture, M6 threaded inlet and outlet ports

CrossLab Flow Through Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3396, Flow cell, rectangular aperture, M6 threaded inlet and outlet ports

CYLINDRICAL CELL UV 100 MM 28 ML 2 PORT - 5061-3392

CrossLab Semi-Microcells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3391, Rectangular semi-micro cell, open top with PTFE lid supplied, base thickness 3.2 mm, self-masking black walls

Accessories for 8453 UV-Vis Cuvettes, Agilent Technologies - 5061-3390, Spacer for 5 mm cell

SPACER FOR 2MM CELL (8453 + CARY UV) 1/P - 5061-3389

Accessories for 8453 UV-Vis Cuvettes, Agilent Technologies - 5061-3388, Spacer for 1 mm cell

CrossLab Macrocells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3386, Rectangular macro cell, open top with PTFE lid supplied

CrossLab Macrocells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3385, Rectangular macro cell, open top with PTFE lid supplied

CrossLab Macrocells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 5061-3384, Rectangular macro cell, open top with PTFE lid supplied

APG REMOTE CABLE - 5061-3378

CrossLab Capillary and Tubing Kits for HPLC, Agilent Technologies - 5061-3304, Capillary tubing kit, flexible, stainless steel

Crosslab GC Fittings, Agilent Technologies - 5061-3303, Fitting, male, ¹/16 IN. stainless steel

CrossLab In-line Gas Purifiers, Agilent Technologies - 5060-9096, 40 cc, Hydrocarbon trap, ¹/8 IN., S-shaped

CrossLab In-line Gas Purifiers, Agilent Technologies - 5060-9084, 40 cc, Moisture trap, conditioned molecular sieve, ¹/8 IN., S-shaped, 0.1 ppm substance concentration

TCD PRESSURE CHECK PLUG - 5060-9055

MAT 384 SQ PRE-SLITTED SILICONE PK50 - 5043-9320, Sealing mat, 384 wells, square, preslitted

MAT 96 RD PRE-SLITTED SILICONE PK100 - 5043-9318, Sealing mat, 96 wells, round, preslitted

InfinityLab Well Plates, Agilent Technologies - 5043-9315, 96-well plate

InfinityLab Well Plates, Agilent Technologies - 5043-9314, 96-well plate

InfinityLab Well Plates, Agilent Technologies - 5043-9313, 96-well plate

InfinityLab Well Plates, Agilent Technologies - 5043-9309, 96-well plate

InfinityLab Well Plates, Agilent Technologies - 5043-9308, 96-well plate

CrossLab Solvent Inlet Tubing and Filters for HPLC, Agilent Technologies - 5043-1790, Solvent lines for bottle head caps, 228 cm long with premounted 1/4-28 PEEK fitting

Crosslab Benchtop for HPLC, Agilent Technologies - 5043-1750, InfinityLab shelf assembly. Can be used on Flex Bench, Benchtop and Flex Bench MS

PUMP HEAD HOLDER - 5043-1400

CrossLab Solvent Bottles and Waste Cans for HPLC, Agilent Technologies - 5043-1337, Waste can, HDPE, 10 L, with S60 thread

KIT INFINITYLAB STAY SAFE CAP STARTER - 5043-1222, InfinityLab Stay Safe cap starter kit. Includes 4 Stay Safe caps (three AG5043-1217 and one AG5043-1218), 4 venting valves with time strip (AG5043-1190), 5 fittings (3.2 mm)

WASTE CAN GL45 6 LITER W/STAY SAFE CAP - 5043-1221, 6 L, InfinityLab waste can, GL 45, with stay safe cap

CrossLab Stay Safe Caps and Accessories for HPLC, Agilent Technologies - 5043-1220, InfinityLab stay safe cap, GL 45, 4 ports for waste

CrossLab Stay Safe Caps and Accessories for HPLC, Agilent Technologies - 5043-1219, InfinityLab stay safe cap, GL 45, 3 ports

STAY SAFE CAP GL45 2 PORTS - 5043-1218, InfinityLab stay safe cap, GL 45, 2 ports. Includes 2 fittings (3.2 mm) and 1 venting valve

STAY SAFE CAP GL45 1 PORT - 5043-1217, InfinityLab stay safe cap, GL 45, 1 port. Includes 1 fitting (3.2 mm) and 1 venting valve

CrossLab Stay Safe Caps and Accessories for HPLC, Agilent Technologies - 5043-1216, InfinityLab fitting for 3.2 mm tubing

CrossLab Stay Safe Caps and Accessories for HPLC, Agilent Technologies - 5043-1214, InfinityLab fitting for 1.6 mm tubing

CrossLab Solvent Bottles and Waste Cans for HPLC, Agilent Technologies - 5043-1196, InfinityLab waste can, GL45, 6 L

CrossLab Stay Safe Caps and Accessories for HPLC, Agilent Technologies - 5043-1195, InfinityLab screw plug, ¼ IN., PTFE

CHARCOAL FILTER WITH TIME STRIP 58 GRAM - 5043-1193, InfinityLab charcoal filter with time strip, 58 gram. For use with InfinityLab Stay Safe Waste Caps

THREAD ADAPTER GL45(M)-GPI 38(F) - 5043-1192, InfinityLab thread adapter, GL45(M) to GPI 38(F), PTFE. For InfinityLab Stay Safe cap

FRONT FERRULE FOR QUICK CONNECT/TURN - 5043-0924, Front ferrule, for InfinityLab Quick Connect and Quick Turn fitting

CrossLab Tools for HPLC, Agilent Technologies - 5043-0915, Mounting tool, plastic

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - 5043-0502, Conical adapter, for ¹/16 IN. ext.Ø sample line, of OneNeb Series 2 nebulizer

BLANK NUT PEEK-ST LONG FINGER-TIGHT - 5043-0277, Blank nut, PEEK-ST, long, finger-tight

PVC FLEXIBLE DUCTING 50MM-ID SPS4 5M - 5043-0065

Crosslab Peristaltic Pump Tubing for ICP-OES, Agilent Technologies - 5043-0063, SPS 3/4 Peristaltic pump tubing, aqueous, HF acid and low volatile organics chemical compatibility, 3-bridged, purple/white tabs, 72 mm tab separation. Suitable for 5100, 5110, 700 series, 5800, 5900, Liberty, Vista series, 4100, 4200, 4210

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5043-0055, ISIS3, Replacement collapsible ferrules, PCTFE, for ¹/8 IN. tubing

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5043-0054, ISIS3, replacement collapsible ferrules, PCTFE, for ¹/16 IN. tubing. PCTFE ferrule suits flangeless tube end fitting. Suitable for ISIS3 used with Agilent 7800, 7850, 7900 and 8900 ICP-MS

CrossLab ISIS (Integrated Sample Introduction System) Supplies for ICP-MS (7700/8800), Agilent Technologies - 5043-0010, Peristaltic pump tubing for ISIS-DS, PVC Tygon®, 2-stop, black/purple tabs, 2.29 mm Int.Ø.. For use with ISIS-DS on Agilent 7500, 7700, 8800 ICP-MS

SWAGELOK FITTING POLYKETON F/1/16IN PK10 - 5042-8957, Swagelok fitting, 1.6 mm Int.Ø, polyketone, for ¹/16 IN. (1.6 mm) Ext.Ø capillary

CrossLab Adapters and Unions for HPLC, Agilent Technologies - 5042-8518, Adapter, PEEK, male luer to female ¹/4-28

CrossLab Adapters and Unions for HPLC, Agilent Technologies - 5042-8517, Adapter, PEEK, female 10-32 to female ¹/4-28

CrossLab Fittings for HPLC, Agilent Technologies - 5042-6500, Swagelok fitting, PEEK, double-winged, 2-piece, for ¹/16 IN. (1.6 mm) ext.Ø capillary

Closures for 2 ml Crimp/Snap Top Vials, Agilent Technologies - 5042-6491, Snap caps

Fraction Collector Supplies, Agilent Technologies - 5042-6470, Collecting tube, 30×48 mm

CrossLab Tubing for HPLC, Agilent Technologies - 5042-6463, Tubing

TUBING PEEK 1.6 MM OD 0.18 MM ID 5 M - 5042-6462, Tubing

TUBING PEEK 1.6 MM OD 0.13 MM ID 5 M - 5042-6461, Tubing

Fraction Collector Supplies, Agilent Technologies - 5042-6458, Collecting tube, 30×100 mm

O-RING FOR VACUUM CHAMBER VITON 1/PK - 5042-4790

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5042-4775, Connector for make-up argon gas line at spray chamber end cap

CrossLab Drain Tubing for ICP-MS, Agilent Technologies - 5042-4769, Tank, drain or rinse, PE, 4 L, for all Agilent ICP-MS systems; 7500; 7700; 7800; 7850; 8800; 8900; 7900. Can be used for waste from spray chamber drain or to supply rinse to autosampler rinse station

Fraction Collector Supplies, Agilent Technologies - 5042-1389, Closing mats for 96-well plates, silicone, pre-slit, fits 96-well plates with volume 0.5 ml

CASSETTE VARIABLE PRESSURE - 5042-1356

1/16IN PEEK FITTINGS FOR 8P VALVE 10/PK - 5042-1337

SIPPER/SAMPLER TUBING KIT FOR 8453 - 5042-1334

CrossLab Tubing and Fittings for 8453/8454 UV Systems, Agilent Technologies - 5042-1333, Tubing kit, Agilent 8453 UV sipper system

DISSOLUTION PROBES 09 MM ID FOR 8453 UV - 5042-1332

VALVE TUBING KIT SINGLE BATH 8453 DIS - 5042-1331

CrossLab Tubing and Fittings for 8453/8454 UV Systems, Agilent Technologies - 5042-1330, Multicell tubing kit Agilent 8453 UV dissolution system

CrossLab Tubing and Fittings for 8453/8454 UV Systems, Agilent Technologies - 5041-2191, Tubing, PTFE, 0.8 mm int.Ø., 1.6 mm ext.Ø., 10 m, Agilent 8453 UV sipper system

CrossLab Tubing and Fittings for 8453/8454 UV Systems, Agilent Technologies - 5041-2185, Peristaltic pump tubing, Tygon, 3-bridged with purple/white/purple tabs, 2.8 mm Int.Ø., 72 mm spacing, 0.406 m length, flow rate 15.9 to 19 ml/min (at 50/60 Hz mains frequency), Agilent 8453 UV sipper system, for the 8453/8454

CrossLab Tubing and Fittings for 8453/8454 UV Systems, Agilent Technologies - 5041-2184, Tubing, peristaltic pump, Tygon, 1.3 mm int.Ø., 406 mm length, 3-bridged, grey/grey/grey, flow rate 3.4 to 4.1 ml/min (at 50/60 Hz mains frequency), Agilent 8453 UV sipper system

CrossLab Tubing and Fittings for 8453/8454 UV Systems, Agilent Technologies - 5041-2166, Peristaltic pump tubing, PVC, 3-stop with purple/purple tabs (2.06 mm Int.Ø.), 72 mm spacing, 0.406 m length, for the 8453/8454

Closures for 2 ml Screw Top Vials, Agilent Technologies - 5040-4682, Multicolor screw cap pack for Agilent 7696; includes 50 of each color: blue, green, red, light turquoise, purple

Crosslab Manual Crimpers and Decappers, Agilent Technologies - 5040-4671, Decapper, manual, for 20 mm caps

Crosslab Manual Crimpers and Decappers, Agilent Technologies - 5040-4669, Crimper, manual, for 20 mm caps

Crosslab Manual Crimpers and Decappers, Agilent Technologies - 5040-4668, Decapper, manual, for 11 mm caps

Crosslab Manual Crimpers and Decappers, Agilent Technologies - 5040-4667, Crimper, manual, for 11 mm caps

FITTING 1/4-28 OD 25 ESD-PEEK ( PK6 - 5023-2883

6M TUBE ESD PTFE OD25 ID16 - 5023-2882

24M TUBING ESD PTFE OD20 ID12 - 5023-2878

FITTING ADAPTER 10-32 F TO 1/4-28 F SST - 5023-2875

FITTING 1/4-28 FOR TUBE-OD16MM ESD-PEEK - 5023-2874

FITTING 1/4-28 FOR TUBE-OD20MM ESD-PEEK - 5023-2872

HEX DRIVER SLITTED SW-4 - 5023-2504

HEX DRIVER SW-5 SLITTED - 5023-2503

CrossLab Tools for HPLC, Agilent Technologies - 5023-2502, Hex driver, SW-6,35 slotted, tool for standard capillary fittings

SPLITTER KIT 25-100ML/MINPREPARATIVE - 5023-2258

SPLITTER KIT 8-40ML/MINPREPARATIVE - 5023-2257

SPLITTER KIT 2-10ML/MIN ANALYTICAL - 5023-2256

SPLITTER KIT 1-5ML/MIN ANALYTICAL - 5023-2255, Splitter kit, 1 to 5 ml/min, analytical, for evaporative light scattering detector

CrossLab Capillaries for HPLC, Agilent Technologies - 5023-2254, Standard capillary, SL/SL, non-swaged/non-swaged

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5023-1527, ISIS 3, Black Flangeless fitting, PP, ¹/8 IN., for 2.18 mm int.Ø. sample loop

FLANGELESS FERRULE + NUT 1/8IN RED 5/PK - 5023-1526

FLANGELESS FERRULE+NUT 1/16IN BLUE 5/PK - 5023-1524

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5023-1523, ISIS 3, Black Flangeless fitting, PP, ¹/16 IN., for 1.0 mm int.Ø. sample loop

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 5023-1522, ISIS 3, White Flangeless fitting, PP, ¹/16 IN., for tune or sample uptake

FLANGELESS FERRULE+NUT 1/16IN YELLOW PK5 - 5023-1521

FLANGELESS FERRULE+NUT 1/16IN PURPLE PK5 - 5023-1520

FITTING MALE TO BARB 1/4-28UNF-ID32 - 5023-1517

BIT KIT FOR TORQUE WRENCH - 5023-0282

SEALTIGHT SCREW SST 4MM - 5023-0232

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - 5022-6539, Vial plate, for 15×6 ml vials

CrossLab Fraction Collector Supplies for HPLC, Agilent Technologies - 5022-6538, Tray, for 27 Eppendorf safe-lock tubes, 0.5/1.0/2.0 ml

SWAGELOK FITTING PEEK LONG F/1/32IN - 5022-6536, Swagelok fitting, 0.8 mm Int.Ø, PEEK, long, for ¹/32 IN. (0.8 mm) Ext.Ø capillary

Fraction Collector Supplies, Agilent Technologies - 5022-6532, Collecting tube, 16×100 mm

Sipper and Autosampler Supplies for Spectrophotometer, Agilent Technologies - 5022-6531, Test tubes, 12×100 mm

CrossLab Capillaries for HPLC, Agilent Technologies - 5022-6510, Standard capillary, no fittings

CrossLab Tubing for HPLC, Agilent Technologies - 5022-6503, Tubing

FRIT 0.5 UM SS PEEK-ENCAPSULATED - 5022-2185, Frit, PEEK-encapsulated, for use with 5064-8273

CrossLab Metering Device Supplies for HPLC, Agilent Technologies - 5022-2175, Plunger seal, 2 mm

10UM STAINLESS STEEL FRITS 10/PK - 5022-2166

PTFE NUTS FOR 1/16 IN OD TUBING 10/PK - 5022-2158

CrossLab Tubing and Fittings for 8453/8454 UV Systems, Agilent Technologies - 5022-2157, Adapter kit, conical, Agilent 8453 UV sipper. Replacement PTFE fittings for the flow cell-pump tubing used with the Sipper system for the 8453/8454

CrossLab Tubing and Fittings for 8453/8454 UV Systems, Agilent Technologies - 5022-2156, Cell fittings kit, PPS, black, Replacement fittings used to connect the tubing to the flow cell used with the Sipper system for the 8453/8454

CrossLab Degasser Supplies for HPLC, Agilent Technologies - 5022-2155, Zero-dead-volume union, PP, 1/4-28 thread

CrossLab Tubing and Fittings for 8453/8454 UV Systems, Agilent Technologies - 5022-2154, Ferrule, Tefzel and stainless steel lock rings, for ¹/16 IN. Ext.Ø. tubing, for the 8453/8454

UNION ZERO-DEAD-VOLUM SS WITHOUT FITTING - 5022-2145, Zero-dead-volume union, 1.6 mm Int.Ø, stainless steel, without fittings, 10-32 to 10-32, female/female

CrossLab Adapters and Unions for HPLC, Agilent Technologies - 5022-2144, T-connector, PEEK, female 10-32 to female 10-32, for ¹/16 IN. ext.Ø tubing, swept volume: 0.57 µl

PEEK FERRULE FOR CE-MS SPRAYER - 5022-2141

TUBING COPPER 1/8 IN X 1.65 MM ID 12 FT - 5021-7107, Tubing

UNION CELL HOLDER 89090A TEMP CONTROL - 5021-1870

Accessories for HPLC Columns, Hypersil, Agilent Technologies - 5021-1845, Cartridge holder for 2, 3, 4 and 4.6 mm Int.Ø cartridges

SPECIAL TEST CAPILLARY 1 END W/O SOCKET - 5021-1831, Special capillary, no fittings

BIO 2/10 CAPILLARY KIT - 5013-0002

SEAL WASH 1050 PUMP - 5001-3743, 1050 Pump Seal Wash Seal

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 5001-3708, Gold Seal for Inlet Valve

FERRULE 0.4MM VG 0.25 COL PK10 - 500-1004

CrossLab Nebulizer Components for Mark 7 Spray Chamber, Agilent Technologies - 4610017400, Nebulizer spring, stainless steel, for Mark 7 spray chamber and all nebulizers used with Agilent AA instruments

KIT FERRULE REMOVAL TOOL - 440-1000

Capillary Column Installation Kit, Agilent Technologies - 430-2000, Capillary column installation kit with diamond-tipped cutting pencil

MAGNIFIER 20X - 430-1020

CrossLab ZORBAX GF-250/450 Kits, Agilent Technologies - 420420-901, External guard hardware kit, PrepHT

Agilent Prep HPLC Columns, Agilent Technologies - 420212-902

Fused Silica Tubing Cutters, Agilent Technologies - 420-1000, Column cutting pencil, diamond tipped

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - 4177-0607, ProSteel sleeve

SOLID SAMPLE MOUNTING PLATE 1/PK - 410204500

APERTURE MASK SOLID SAMPLE HOLDER 5 MM - 410204300

APERTURE MASK SOLID SAMPLE HOLDER 1 MM - 410204100

APERTURE MASK SOLID SAMPLE HOLDER 10MM - 410203900

DS-42 OIL MIST ELIMINATOR - 393847701

MULTIPLIER CHANNELTRON MOD CEM 4755 - 393175101

ELBOW ROUGHING PUMP - 393064601

ION TRAP FILAMENT DISK ASSEMBLY - 393060191

TRANSFER LINE TIP - 393059191

CrossLab Instrument Supplies for GC/MS, Agilent Technologies - 393031501, Electron multiplier assembly, for Agilent 220-MS Ion Trap

QUAD-RING XFERLINE 1.112 ID - 393010918

TRANSFER LINE WRENCH ALIGNMENT TOOL - 393010801

MERLIN MICROSEALSPME REPL23GA1/PK - 392609902

MERLIN MICROSEAL SPME KIT 23 GAUGE1/P - 392609901

LIQUID SAMPLING NEEDLE ASSEMBLY (1) - 392607912

Inlet Sleeves, Agilent Technologies - 392598001, Inlet sleeve, gooseneck, GWOL

ION TRAP FILAMENT DISK ASSY1/PK - 392043700

GC/MS FITTINGVACUUM HOSE 3/4 IN - 392028900

INTERNAL FILAMENT 2 ON ONE DISK - 392017401

BEAKER DISINTEGRATION (USP 9TH SUPPLMNT) - 37-5305

TUBE(25MM) RPLCMNT 6 TUBE BSKT SET OF 6 - 37-5000

CrossLab Disintegration Baskets, Agilent Technologies - 37-3001, Basket, 6-tube, 10-mesh, 1905 µm (USP)

PUMP TUBE SOLVA 3 BRIDGE YLW/YLW 12/PK - 3710069300

PUMP TUBE VITON 3 TAB FLARE BLK/BLK PK12 - 3710069100

PUMP TUBE SOLVA 3 TAB FLARE ORG/YLW PK12 - 3710069000

PERI PUMP TUBES VITON ORANGE/GREEN 12/PK - 3710068600

PUMP TUBE SANTOPRENE ORG/GRN FLARED PK12 - 3710068500

PERI PUMP TUBES SANTOPRENE ORG/GRN 12/PK - 3710068400

PERI PUMP TUBES VITON BLACK/BLACK 6/PK - 3710053600

PERI PUMP TUBE MARPRENE BLUE/BLUE 12/PK - 3710044400

PERI PUMP TUBE MARPRENE GREY/GREY 12/PK - 3710044300

PERI PUMP TUBE MARPRENE WHITE/WHITE 12PK - 3710044200

PERI PUMP TUBE MARPRENE BLACK/BLACK 6/PK - 3710044100

PERI PUMP TUBE MARPRENE ORNG/YELLOW 12PK - 3710044000

PERI PUMP TUBES VITON GREY/GREY 12/PK - 3710043800

PERI PUMP TUBES VITON WHIT/WHIT 12/PK - 3710043700

PERI PUMP TUBES VITON ORANGE/YEL 12/PK - 3710043500

PERI PUMP TUBES SANTOPRENE BLK/BLK 15/PK - 3710041900

PERI PUMP TUBES SANTOPRENE YEL/YEL 15/PK - 3710041800

PTFE TUBING 19MM OD X 03MM ID 1/PK - 3710034000

Crosslab Other Tubing for ICP-OES, Agilent Technologies - 3710031500, Tubing, ¹/16 IN. wall thickness

Crosslab Peristaltic Pump Tubing for ICP-OES, Agilent Technologies - 3710027200, Peristaltic pump tubing, aqueous and HF acid chemical compatibility, 2-bridged, black/black tabs, 150 mm tab separation, for pumping reagents with Agilent VGA 76/77 vapor generation accessory. Suitable for 5100, 5110, 700 series, 5800, 5900, Liberty, Vista series

VGA TUBING ACID FLEXIBLE 0081IN ID 1/PK - 3710026800

TUBE PLASTIC 3/32 X 7/32 IN 1/PK - 3710026600

TUBING VGA-76/77 GLS TO ABS CELL 1/PK - 3710026390

Integrator Supplies and Cables, Agilent Technologies - 35900-60900, Analog cables to connect 3394/95A and 3396A/B integrator

Integrator Supplies and Cables, Agilent Technologies - 35900-60670, Remote start cable for general use with lug

CrossLab Reciprocating Dissolution Holders, Agilent Technologies - 33-9041, Basket holder assembly, stainless steel, use with 10 ml cell, for 400-DS, 50-mesh

CrossLab Dissolution Vessels and Carriers, Agilent Technologies - 33-9000, Dissolution cell, clear glass, 10 ml, for 400-DS

CrossLab Rotating Bottle Supplies, Agilent Technologies - 32-5530, Rotating Bottle, clear glass, 100 ml

CrossLab Vacuum Pump Supplies for GC/MS, Agilent Technologies - 3162-1056, Oil mist filter kit

CrossLab CE and CE/MS Filters and Frits, Agilent Technologies - 3150-0958, Solvent inlet filter, PTFE, 10 µm pore size

FILTER FLUID - 3150-0942, Filter fluid

Spare Parts for CE Systems, Agilent Technologies - 3150-0619, Air filter, 5 µm

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - 301-220-HSP, Needle assembly, vial probe, stainless steel, deactivated, for Agilent 7694

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - 301-016-HSP, Needle, headspace transfer line, 0.05 in od, nickel

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - 301-015-HSP, Needle, headspace transfer line, 0.08 IN. ext.Ø, nickel

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - 301-013-HSP, Needle assembly, vial probe, stainless steel, for Agilent 7694

Frits for In-Line Filters, Agilent Technologies - 280959-907, Frit, 2.1 mm, 0.5 µm, for use with 101479-822

CrossLab Dissolution Vessels and Carriers, Agilent Technologies - 27-5130, Outer tube, clear glass, 50 ml, for BIO-DIS

CrossLab Dissolution Vessels and Carriers, Agilent Technologies - 27-5120, Outer media tube, flat bottom, clear glass, 1000 ml, for BIO-DIS

CrossLab Dissolution Vessels and Carriers, Agilent Technologies - 27-5110, Outer media tube, clear glass, 100 ml, for BIO-DIS

CrossLab Dissolution Vessels and Carriers, Agilent Technologies - 27-5100, Outer media tube, USP, clear glass, 300 ml, for BIO-DIS

CrossLab Dissolution Vessels and Carriers, Agilent Technologies - 27-5000, Standard inner sample glass tube, USP, clear glass, for 300 ml outer media tube, for BIO-DIS

CrossLab Reciprocating Dissolution Screens, Agilent Technologies - 27-2105, Stainless steel screens, 1.25 inch Ext. Ø for 300 ml tubes, 40-mesh, 381 µm, for BIO-DIS

CrossLab Reciprocating Dissolution Screens, Agilent Technologies - 27-2100, Stainless steel screens, 1.25 inch Ext. Ø for 300 ml tubes, 20-mesh, 864 µm, for BIO-DIS

CrossLab Reciprocating Dissolution Tubes, Agilent Technologies - 27-1050, Lower cap, wider diameter for improved mixing, VanKel type, for 300 ml tubes, for BIO-DIS

EXHAUST FILTERVACUUM PUMP DS - 2710100100

CrossLab Reciprocating Dissolution Holders, Agilent Technologies - 27-0102, Spring holder, Alza, 0.96 IN. L × 0.33 IN. Int. Ø × 0.031 IN. wire Int. Ø, spring offset, for BIO-DIS

CrossLab Reciprocating Dissolution Holders, Agilent Technologies - 27-0100, Spring holder, Alza, 1.45 IN. L × 0.58 IN. Int. Ø × 0.031 IN. wire Int. Ø, spring offset, for BIO-DIS

TARGET ALIGNMENT CARY SRA/DRA 1/PK - 2418004400

INJECTOR ALUMINA SEMI-DEM TORCH 18MM ID - 2410067590

NEBULIZER TUBING CAPILLARY KETONE BASED - 2410020500

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - 2322700011, Sample probe, stainless steel, deactivated, for Agilent G1888 headspace sampler

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - 2322590005, Needle, headspace transfer line, stainless steel, deactivated, 0.7 mm ext.Ø, 0.4 mm int.Ø

G1888A Network Headspace Sampler Supplies, Agilent Technologies - 2307232901, Union

M6 UNION BRASS - 2302533140

NEUTRAL DENSITY SCREEN TESTED 1/PK - 218006500

XENON FLD FLASH LAMP F/FLUOR DETECTOR - 2140-0600, Xenon FLD flash lamp, for Agilent G1321A/B/C & G7121A/B fluorescence detector

Crosslab Deuterium Lamps, Agilent Technologies - 2140-0585, Deuterium lamp, G1600 CE diode array detector

CrossLab Splitless Liners for GC, Agilent Technologies - 210-3003, Inlet liner, splitless, straight

CrossLab Splitless Liners for GC, Agilent Technologies - 210-3003-5, Inlet liner, splitless, straight

KBR WINDOW ASSY PAIR - SPARE ONLY - 210228390

Burners, Agilent Technologies - 210164000, Air/acetylene burner assembly

ASSY CAPILLARY SOLENOID PSD SPARE 1/PK - 210131490

VARIABLE PATHLENGTH RECT CELL HOLDER - 210125300

MICROMIST LOW FLOW CONCENTRIC NEB 1/PK - 2010126000

TORCH ANNEALED RADIAL 14MM ID INJECTOR - 2010117500

TORCH ONE PIECE AXIAL 08MM ID INJECTOR - 2010104700

CERAMIC INJECTOR 24MM DEMOUNT TORCH 1/P - 2010101700

CrossLab Nebulizers for ICP-OES, Agilent Technologies - 2010096400, Seaspray concentric borosilicate glass nebulizer, with Ezylok connector

QUARTZ INJECTOR 10MM RADIAL TORCH 1/PK - 2010096000

ALUMINA INJECTOR 18MM DEMOUNT TORCH 1/P - 2010095900

QUARTZ INJECTOR 24MM AXIAL TORCH 1/PK - 2010095400

CrossLab Torches for 700 Series, Vista Series and Liberty ICP-OES, Agilent Technologies - 2010094800, Torch, with straight connection, quartz, high-solids Agilent injector design

CrossLab Torches for 700 Series, Vista Series and Liberty ICP-OES, Agilent Technologies - 2010090400, Torch, with straight connection, low-flow, quartz, injector tube

TORCH BODY SEMI-DEMOUNT AXIAL ICP 1/P - 2010083400

CrossLab Torches for 700 Series, Vista Series and Liberty ICP-OES, Agilent Technologies - 2010069690, Torch, with straight connection, low-flow, quartz, injector tube

FLAT MIRROR COATED 24 X 32 MM 1/PK - 2010062590

EMISSION FILTER KIT SET OF 9 - 2010017900

Crosslab µSIL-FC and µSIL-DNA Capillaries with Windows, Agilent Technologies - 194-8111, CE capillary, uSIL-FC, 50 µm Int.Ø, 56 cm effective length, 80 cm total length, with window, 0.075 film thickness

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - 19301-60660, FID flow measuring assembly

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - 19258-20870, Transfer line ferrule

G1883A Network Headspace Supplies, Agilent Technologies - 19258-20830, Transfer line nut

Flame Photometric Detector (FPD) Supplies, Agilent Technologies - 19256-80045, Heat-shield gasket, perfuoroelastomer

Flame Photometric Detector (FPD) Supplies, Agilent Technologies - 19256-80030, FPD first window

Flame Photometric Detector (FPD) Supplies, Agilent Technologies - 19256-60800, FPD ignitor replacement kit

CrossLab Column Nuts for GC, Agilent Technologies - 19256-60590, Ferrule/liner kit

COLUMN FERRULE INSTALLATION TOOL - 19251-80680

INSERT STANDARD WELDMENT MANUAL PNEUMTIC - 19251-60575

WRENCH ANGLED F/SPLIT/SPLITLESS SEPTUM - 19251-00100

Cool On-Column (COC) Inlet Supplies, Agilent Technologies - 19245-80521, Septum nut

Cool On-Column (COC) Inlet Supplies, Agilent Technologies - 19245-20780, Cool-on-column insert, aluminum clad, 4-rings

Cool On-Column (COC) Inlet Supplies, Agilent Technologies - 19245-20525, Cool-on-column insert, 5 silver rings

Cool On-Column (COC) Inlet Supplies, Agilent Technologies - 19245-20515, Cool-on-column insert, 6 rings

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - 19244-80610, FID/NPD adapter, for capillary columns

Supplies for Purged Packed Inlet, Agilent Technologies - 19244-80540, Column adapter for use with glass liners, 530 µm

Supplies for Purged Packed Inlet, Agilent Technologies - 19243-80570, Packed port insert weldment

Supplies for Purged Packed Inlet, Agilent Technologies - 19243-80530, Column adapter for use with glass liners, 3.17 mm

ADAPTER LINER PACKED PORT 1/8INCH COLUMN - 19243-80510

COVER LOWER INSULATION - 19243-00070

CrossLab Electron Capture Detector (ECD) for GC, Agilent Technologies - 19234-60720, Insulation cup

CrossLab Electron Capture Detector (ECD) for GC, Agilent Technologies - 19233-20755, ECD adapter end cap

CrossLab Electron Capture Detector (ECD) for GC, Agilent Technologies - 19233-20625, ECD adapter liner, fused silica

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - 19231-80520, FID/NPD adapter, for ¹/8 IN. packed columns

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - 19231-21060, Igniter castle, Hastelloy

Flame Ionization Detector (FID) Supplies, Agilent Technologies - 19231-20970, Insulator, upper collector

COLLECTOR BODY - 19231-20960

INSULATOR LOWER COLLECTOR - 19231-20950

CrossLab Flame Ionization Detector (FID) for GC, Agilent Technologies - 19231-20910, Ignitor castle, for FID

KIT GC SUPPLY GAS INSTALLATION - 19199TF

Crosslab HP-1 Columns, Agilent Technologies - 19095Z-020, J&W HP-1 GC column

CrossLab HP-PLOT Q Columns, Agilent Technologies - 19095P-QO4, GC column, 7 IN. cage

Crosslab HP-1 Columns, Agilent Technologies - 19091Z-431, J&W HP-1 GC column

Crosslab HP-5ms Ultra Inert Columns, Agilent Technologies - 19091S-436UI, J&W HP-5ms Ultra Inert GC column

CrossLab HP-5ms Columns, Agilent Technologies - 19091S-431

CrossLab HP-5ms Columns, Agilent Technologies - 19091S-102

CrossLab HP-PLOT Q Columns, Agilent Technologies - 19091P-QO4, GC column, 7 IN. cage

Crosslab HP-INNOWax Columns, Agilent Technologies - 19091N-133I

CrossLab HP-5 Columns, Agilent Technologies - 19091J-433

CrossLab Ultra-1 Columns, Agilent Technologies - 19091A-108, J&W Ultra 1 GC column, 7 IN. cage

CrossLab Ultra-1 Columns, Agilent Technologies - 19091A-101, J&W Ultra 1 GC column, 7 IN. cage

NEEDLES FUSED SILICA 6/PK - 19091-63000

CrossLab Tubing and Retention Gaps, Agilent Technologies - 19091-60620E, Fused silica, deactivated, 5 IN. cage

Crosslab HP-1 Columns, Agilent Technologies - 19091-60312, J&W HP-1 GC column

KIT GTA 120 ZEEMAN GFAA SUPPLIES 1/PK - 190068000

CrossLab Sample Tubes and Vials, Agilent Technologies - 190065200, 50 ml, Centrifuge tube, graduated, with screw cap, 29 mm ext. Ø., 115 mm, conical base, wide neck, threaded top

CrossLab Sample Tubes and Vials, Agilent Technologies - 190049700, 14 ml, Tube, 16 mm ext. Ø., 125 mm

FILTERMATE 2 MICRON PTFE PK100 - 190048000

CrossLab Sample Tubes and Vials, Agilent Technologies - 190047900, 50 ml, Digestion tubes, 30 mm ext. Ø., 106 mm height, with screw cap, for 36 and 54-well hot block.

MARK 7 ATOMIZATION SYSTEM SUPPLIES KIT - 190034100

VGA 77 OPERATING SUPPLIES KIT - 190025200

CrossLab Gas and Liquid Sampling Valve Supplies, Agilent Technologies - 18900-21000, Valve actuator limiter, 10-port, 36, stainless steel

CrossLab Gas and Liquid Sampling Valve Supplies, Agilent Technologies - 18900-20300, Valve tubing, ¹/16 IN., 560 mm, stainless steel

CrossLab Direct Connect Liners for GC, Agilent Technologies - 18740-80200, Inlet liner, direct, for gas samples, headspace, purge and trap, straight

CrossLab Split Liners for GC, Agilent Technologies - 18740-80190, Inlet liner, split, straight, with cup (for manual injections)

Split/Splitless Inlet Gold Seals, Agilent Technologies - 18740-20880, Inlet seal, stainless steel

Electron Capture Detector (ECD), Agilent Technologies - 18713-60050, ECD wipe test kit

TUBING PURPLE/WHITE MARPRENE F/810 PK8 - 17-6000

CrossLab Dissolution Full Flow Filters, Agilent Technologies - 17-4140, Filtertip, PE, 45 µm, for 705-DS; 708-DS; 709-DS; VK7000; VK7030

CrossLab Dissolution Full Flow Filters, Agilent Technologies - 17-4100, Filtertip, PE 2 µm, for 705-DS; 708-DS; 709-DS; VK7000; VK7030

CrossLab Dissolution Full Flow Filters, Agilent Technologies - 17-4045, Full flow filter, PVDF, 10 µm, green, for 705-DS; 708-DS; 709-DS; VK7000; VK7030

CrossLab Dissolution Full Flow Filters, Agilent Technologies - 17-4021, Full flow filter, UHMWPE, 70 µm, red, for 705-DS; 708-DS; 709-DS; VK7000; VK7030

CrossLab Dissolution Full Flow Filters, Agilent Technologies - 17-4010, Full flow filter, UHMWPE, 35 µm, white, for 705-DS; 708-DS; 709-DS; VK7000; VK7030

CrossLab Dissolution Full Flow Filters, Agilent Technologies - 17-4005, Full flow filter, UHMWPE, 10 µm, blue, for 705-DS; 708-DS; 709-DS; VK7000; VK7030

CrossLab Dissolution Full Flow Filters, Agilent Technologies - 17-4003, Full flow filter, UHMWPE, 1 µm, for 705-DS; 708-DS; 709-DS; VK7000; VK7030

CrossLab Dissolution Full Flow Filters, Agilent Technologies - 17-4001, Full flow filter, UHMWPE, 10 µm, Blue, for 705-DS; 708-DS; 709-DS; VK7000; VK7030

SAMPLING CANNULA812IN FOR 2L VESSEL - 17-3307

CrossLab Dissolution Sampling Cannulas, Agilent Technologies - 17-3306, Cannula extension kit, 500 ml (for use with one 4.5 IN. cannula), for VK7000

SAMP CANN 65IN FOR 500ML(IN 900ML VES) - 17-3305

CrossLab Dissolution Shafts, Agilent Technologies - 16-3631, Basket shaft, lower interchangeable Spin on/off, electropolished stainless steel, 21 IN. length, 3-clip, USP, for 705-DS; 708-DS; 709-DS; VK7000

SET RECEPTOR SHAFT 1475IN(21INTOTAL) - 16-3613

SET PADDLE SPIN ON/OFF E-POLISHED1L - 16-3603

SET PADDLE SPIN ON/OFF PTFE-COATED 1L - 16-3602

Ferrules for Spectrophotometers, ICP-OES (Agilent Technologies) - 1610136600, Ferrule 1/16 TBG (×4 required)

SPRAY CHAMBER BUNG FLUORINATED - 1610118800

BLANKING PLUG FOR NEB BLOCK PEEK 1/PK - 1610118400

Mark 7 Spray Chamber Supplies, Agilent Technologies - 1610117390, Venturi for nebulizer, Mark 7, PEEK, for atomization system used with current AA and earlier AA instruments

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - 1610093000, Barb connector for waste line, polypropylene, int.Ø of ¹/16 to ¹/16 IN.

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - 1610085600, Connector, for nebulizer gas flow, ¹/4 IN., connects to nebulizer gas outlet on Agilent ICP-OES

CrossLab O-Rings and Fittings for ICP-OES, Agilent Technologies - 1610085300, Connector, for nebulizer gas flow, ¹/8 IN., connects nebulizer gas outlet on Agilent ICP-OES

Crosslab Ultimate Plus Deactivated Fused Silica, Agilent Technologies - 160-7625-5

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-4535-5, Stainless steel, deactivated

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-2635-5, Fused silica, deactivated

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-2635-10, Fused silica, deactivated

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-2615-10, Fused silica, deactivated

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-2535-1, Fused silica, deactivated

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-2535-10, Fused silica, deactivated

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-2325-5, Fused silica, deactivated

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-2325-1, Fused silica, deactivated

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-2325-10, Fused silica, deactivated

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-2255-5, Fused silica, deactivated

CrossLab Tubing and Retention Gaps, Agilent Technologies - 160-2255-10, Fused silica, deactivated

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 1535-5215, Rebuild Kit, for Flow Modulator

CrossLab Vacuum Pump Supplies for GC/MS, Agilent Technologies - 1535-4970, Oil mist filter

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - 1535-4952, Rotor, 6 port, W series, 350 °C maximum

CrossLab Gas and Liquid Sampling Valve Supplies, Agilent Technologies - 1530-2163, Valve tubing, ¹/16 IN. with ¹/8 IN. flare end, 360 mm, stainless steel

PROBE RETAINING NUT M10X125 KNURLED 1/P - 1510249400

CrossLab Nebulizer Components for Mark 7 Spray Chamber, Agilent Technologies - 1510226800, Screw, black ertalyte, nebulizer capillary adjuster, for Mark 7 spray chamber. Compatible with 110; 220; 240; 280; 50; 55

Crosslab Spray Chamber Components for Atomic Absorption Instruments, Agilent Technologies - 1510226500, Impact bead securing screw, PEEK, M6 x 6LG, for Mark 7 spray chamber. Compatible with 110; 220; 240; 280; 50; 55

CrossLab Spray Chamber Components for Atomic Absorption Instruments, Agilent Technologies - 1510226000, Screw, bead adjuster, locking, stainless steel, M8, for Mark 7 spray chamber

CrossLab Pre-Optics Cone and Windows for ICP-OES, Agilent Technologies - 1510220200, Finger nut for ICP-OES pre-optics cone

SCREW KNURLED M4 RETAINING BLOCK 1/PK - 1510146800

CrossLab Dissolution Shafts, Agilent Technologies - 14-3636, Mini basket shaft, lower interchangeable Spin on/off, electropolished stainless steel, 21 IN. length, O-ring, for 705-DS; 708-DS; 709-DS; VK7000

NEWBASKET SHAFT SPIN ON/OFF 3-CLIP 2 - 14-3634

CrossLab Dissolution Shafts, Agilent Technologies - 14-3631, Basket shaft, lower interchangeable Spin on/off, electropolished stainless steel, 21 IN. length, 3-clip, USP, for 705-DS; 708-DS; 709-DS; VK7000

NEWBASKET SHAFT 3-CLIP CONICAL 21 IN - 14-3624

NEWBASKET SHAFT 3-CLIP 21 IN - 14-3620

CrossLab Dissolution Shafts, Agilent Technologies - 14-3613, Upper receptor shaft, Spin on/off, electropolished stainless steel, 14.75 IN. length, for 705-DS; 708-DS; 709-DS; VK7000

RECEPTOR SHAFT 875 IN (15 IN TOTAL) - 14-3612

CrossLab Dissolution Paddles, Agilent Technologies - 14-3608, Mini paddle, lower interchangeable Spin on/off, electropolished stainless steel, 21 IN. length, for 705-DS; 708-DS; 709-DS; VK7000

NEW PADDLESPIN ON/OFFPTFE-COATEDMINI - 14-3607

PADDLE PEEK SPIN ON/OFF 1L - 14-3606

CrossLab Dissolution Paddles, Agilent Technologies - 14-3605, Paddle, lower interchangeable Spin on/off, electropolished stainless steel, 21 IN. length, 2L, for 705-DS; 708-DS; 709-DS; VK7000

PADDLE PTFE-COATED SPIN ON/OFF 2L - 14-3604

CrossLab Dissolution Paddles, Agilent Technologies - 14-3603, Paddle, 21 IN. length, lower interchangeable Spin on/off, electropolished stainless steel, 1 L, for 705-DS; 708-DS; 709-DS; VK7000

PADDLE SPIN ON/OFF PTFE-COATED 1L - 14-3602

MINI PADDLE E-POLISHED 24 IN - 14-3600

NEWPADDLE MINI PTFE-COATED 24 IN - 14-3599

PADDLE E-POLISHED 24 IN - 14-3597

NEWPADDLE PTFE-COATED 21 IN - 14-3594

NEWPADDLE E-POLISHED 145 IN - 14-3590

CrossLab Tubing, Agilent Technologies - 1300502506, Tube, probe to 6-port valve, deactivated

Bond Elutâ„¢ Plexa SPE Cartridges, Agilent Technologies - 12259506, 6 ml, Straight barrel cartridge

Accessories for Vac Elutâ„¢ 20 Manifold, Agilent Technologies - 12234511, Delivery needles, PP

CrossLab Dissolution Baskets, Agilent Technologies - 12-2100V, Basket, 40 mesh, 381 µm, stainless steel, for 708-DS; 709-DS; VK7000; VK7030

CrossLab Sample Preparation, Agilent Technologies - 12131042, 140 ml, Reservoir

Bond Elutâ„¢ Frit for SPE Cartridges, Agilent Technologies - 12131023, Frit for SPE cartridges, 20.6 mm, 20 ml

Bond Elutâ„¢ Frit for SPE Cartridges, Agilent Technologies - 12131021, Frit for SPE cartridges, 12.7 mm, 6 ml

Bond Elutâ„¢ Frit for SPE Cartridges, Agilent Technologies - 12131020, Frit for SPE cartridges, 9.5 mm, 3 ml

Bond Elutâ„¢ Empty Cartridges and Empty Cartridges with Pre-installed Frits, Agilent Technologies - 12131018, 60 ml, Empty SPE cartridge with two frits (pre-inserted)

Bond Elutâ„¢ Empty Cartridges and Empty Cartridges with Pre-installed Frits, Agilent Technologies - 12131016, 12 ml, Empty SPE cartridge with two frits (pre-inserted)

Bond Elutâ„¢ Empty Cartridges and Empty Cartridges with Pre-installed Frits, Agilent Technologies - 12131012, 60 ml, Empty SPE cartridge

Bond Elutâ„¢ Empty Cartridges and Empty Cartridges with Pre-installed Frits, Agilent Technologies - 12131011, 20 ml, Empty SPE cartridge

Bond Elutâ„¢ Empty Cartridges and Empty Cartridges with Pre-installed Frits, Agilent Technologies - 12131010, 12 ml, Empty SPE cartridge

Bond Elut Adapters, Agilent Technologies - 12131001, Adapter cap for 1, 3 and 6 ml Bond Elut cartridges

CrossLab CycloSil-B Columns, Agilent Technologies - 112-6632, J&W CycloSil-B GC column, 7 IN. cage

CrossLab Dissolution Full Flow Filters, Agilent Technologies - 11-1315, Flow Cell, 1 mm pathlength, for Cary 50/60

CrossLab Dissolution Flow Cells, Agilent Technologies - 11-1310, Flow Cell, 2 mm pathlength, for Cary 50/60

CrossLab Dissolution Flow Cells, Agilent Technologies - 11-1300, Flow cell, 10 mm pathlength, for Cary 50/60

Crosslab Source Lamps for UV-Vis and UV-Vis-NIR, Agilent Technologies - 110713990, Lamp, deuterium, UV, for Cary 4000/5000/6000i

CrossLab Spray Chambers for Atomic Absorption, Agilent Technologies - 110634490, Spray chamber assembly, fluorinated HDPE, Mark 7, complete, for flame AA, for aqueous/acidic samples

CrossLab Dissolution Tubing and Tubing Kits, Agilent Technologies - 1005-1920, Tubing assembly, sample and return cannulas, 6-position, 1 L, for 708-DS

CrossLab DAD and MWD Supplies for HPLC, Agilent Technologies - 1000-0488, Quartz window, for DAD flow cells

SEAL WASH F/1260 BIO-INERT QUATRNRY PUMP - 0905-1731, Seal wash for 1260 Bio-inert quaternary pump

Flame Photometric Detector (FPD) Supplies, Agilent Technologies - 0905-1610, O-ring, Perfluoroelastomer

O-RING 2-002 PERFLUOROELASTOMER WHITE - 0905-1609

O-RING 2-011 PERFLUOROELASTOMER WHITE - 0905-1608

CrossLab Metering Device Supplies for HPLC, Agilent Technologies - 0905-1599, Piston seal, for G2258A Dual Loop autosampler

Nitrogen Phosphorus Detector (NPD) Supplies, Agilent Technologies - 0905-1284, NPD metal C-ring bottom

O-RING FPM FLUOROCARBON PK12 - 0905-1145

CrossLab Other Tubing for ICP-OES, Agilent Technologies - 0890-2603, Tubing, PFA, for gas supply to nebulizer, 3 mm int.Ø., 4 mm ext.Ø., 1 m length

TUBING PEEK 1.6 MM OD 0.25 MM ID 1.5 M - 0890-1762, Tubing

TUBING PEEK 1.6 MM OD 0.5 MM ID 1.5 M - 0890-1761, Tubing

CrossLab Cell Holders, Bases and Accessories for UV-Vis and UV-Vis-NIR, Agilent Technologies - 08451-60104, Standard cell holder assembly for the Agilent 8454 and 8453 UV-Vis spectrophotometer

CrossLab Gas and Liquid Sampling Valve Supplies, Agilent Technologies - 07675-80050, Valve tubing, ¹/16 IN. with ¹/8 IN. bulkhead fitting, stainless steel

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - 05990-60084, Filament assembly, for Agilent 5970 GC (EI/CI)

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - 05971-60140, Filament assembly, for Agilent 5971 MSD

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - 05971-20134, Drawout plate, 3 mm, for 5973; 5975; 5977

DUAL PARKING POST FOR AUTOSAMPLER - 05890-61525

Spray Chambers and Supplies, Agilent Technologies - 0535-1082, End cap nut for ICO-MS nebulizer connection

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - 0515-1446, Setscrew, for Agilent 5971/72/73 MSD

Tape, PTFE, Agilent Technologies - 0460-1266, Tape

CrossLab Maintenance Kits for HPLC, Agilent Technologies - 01100-68003, Agilent 1100 Stay-Fit maintenance pack for G1312A pump, G1313A/G1329A autosampler, and G1315A/G1365A detector

CAPILLARY STAINLESS STEEL 0.12MM 280 MM - 01090-87610, Standard capillary, S/S, pre-swaged/non-swaged

CAPILLARY STAINLESS STL 0.25MM ID 130MM - 01090-87308, Standard capillary, S/S, pre-swaged/pre-swaged

CAPILLARY STAINLESS STL 0.17MM ID 130MM - 01090-87305, Standard capillary, S/S, pre-swaged/non-swaged

CAPILLARY STAINLESS STL 0.17MM ID 280MM - 01090-87304, Standard capillary, S/none, pre-swaged/-

CrossLab Solvent Inlet Tubing and Filters for HPLC, Agilent Technologies - 01090-68703, Filter assembly, preparative, in-line, stainless steel, 4.8 mm int.Ø., 2 µm, 2 frits, 0.25×130 mm connecting capillary

FILTER ASSEMBLY IN-LINE LOW DISPRN 2UM - 01090-68702, Filter assembly, in-line, low dispersion, 2 frits

In-Line Filters, Agilent Technologies - 01090-27609, Replacement frits for universal in-line filter

CAPILLARY STAINLESS STL 0.17X800MM SX/S - 01078-87305, Standard capillary, SX/S, pre-swaged/non-swaged

CAPILLARY STAINLESS STEEL 0.17MM 800MM - 01048-87302, Standard capillary, S/S, pre-swaged/non-swaged

CrossLab Maintenance Kits for HPLC, Agilent Technologies - 01018-68722, Continuous seal wash upgrade kit

CAPILLARY STAINLESS STL 0.25MM ID 700MM - 01018-67305, Standard capillary, S/S, pre-swaged/non-swaged

INSERT TOOL FOR INSERTING WASH SEALS - 01018-23702

STATOR 10 PORT MICRO VALVE MAX 600 BAR - 0101-1421, Stator head, 2-position/10-port micro valve (p/n 5067-4144), maximum pressure 600 bar, stainless steel

CrossLab Autosampler Valve Supplies for HPLC, Agilent Technologies - 0101-1417, Stator, 2-position/6-port injection valve, stainless steel, maximum pressure 600 bar

CrossLab Column Selection Valves and Supplies for HPLC, Agilent Technologies - 0101-1415, Rotor seal, PEEK, 5 grooves, max. 600 bar (8702 psi)

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 0101-1390, Stator, for 2-position/6-port injection valve, 400 bar, for G2258A, stainless steel

CrossLab Injection Valve Supplies for HPLC, Agilent Technologies - 0101-1268, Rebuild kit Hi Flo

REDUCING FILTER - 0101-1001

CrossLab Gas and Liquid Sampling Valve Supplies, Agilent Technologies - 0101-0584, Replacement valve, 6-port, WT series, 300 psi/350 C max, Nitronic 60

CrossLab Manual Injection Valves and Supplies for HPLC, Agilent Technologies - 0101-0376, 10 µl, Sample loop

CrossLab Gas and Liquid Sampling Valve Supplies, Agilent Technologies - 0101-0303, Sample loop, GC valve, stainless steel, 0.25 ml

CrossLab Gas and Liquid Sampling Valve Supplies, Agilent Technologies - 0101-0299, Sample loop, GC valve, stainless steel, 1.0 ml

Flow Meters with Glass Bubble (Agilent Technologies) - 0101-0113, Glass bubble flow meter (100 ml)

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 0100-2703, Gas connector, UHMI dilution Argon gas line connection to dilution port. Suitable for Agilent 7900and 8900 ICP-MS

CrossLab Headspace Sampler Supplies for GC, Agilent Technologies - 0100-2595, Ferrule, polyamide, graphite ¹/32 IN.

CrossLab Fittings and Connectors for ICP-MS, Agilent Technologies - 0100-2583, Gas connector, HMI aerosol dilution Argon gas line connection to dilution port. Suitable for 7700 and 8800 ICP-MS

UNION ZERO-DEAD-VOL PEEK WITH 2 FITTINGS - 0100-2441, Zero-dead-volume union, 1.6 mm Int.Ø, PEEK, with two fittings, 10-32 to 10-32, female/female

ROTOR SEAL VESPEL 5-GROOVE 0.65 INCH OD - 0100-2415, Rotor seal, Vespel, 5-groove, 0.65 IN. Ext.Ø.

UNION PEEK FOR 1/8 OD TUBING - 0100-2410, Zero-dead-volume union, PEEK, for ¹/8 inch (3.2 mm) ext.Ø tubing, 2× female ¹/4-28 ports

ADAPTER PEEK TO SWITCH 1/4-28 TO 10-32 - 0100-2298, Adapter, 1.6 mm Int.Ø PEEK, to switch ¼-28 to 10-32, female/male

ROTOR SEAL FOR 2 POS/6PORT VALVE 400BAR - 0100-2233, Rotor seal, PEEK, for 2 position/6 port valve 400 bar

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 0100-2231, Rotor seal, PEEK, 2-groove for p/n 0101-0921 injection valve

Crosslab Instrument Supplies for GC/MS, Agilent Technologies - 0100-2138, Ferrule one piece fused silica adapter

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 0100-2089, Stator, for 2-position/6-port micro injection valve, 400 bar, for G1377A, G1389A, stainless steel

ROTOR SEAL VESPEL 2-GROOVE FOR MICRO-LC - 0100-2088, Rotor seal, Vespel, 2-groove for micro-LC, for 0101-1050 micro-injection valve

CrossLab Pump Valves and Supplies for HPLC, Agilent Technologies - 0100-1859, Stator face assembly, stainless steel, for p/n 5063-6502 valve

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - 0100-1854, Rotor seal, PTFE, for 0101-0920 valve, for 1100 LC System

STATOR HEAD FOR MANUAL INJECTION VALVE - 0100-1850, Stator head, stainless steel, for manual injection valve (7725i), 400 bar, for 1120/1220

Vacuum Degassers, Agilent Technologies - 0100-1710, Mounting tool for flangeless nut

CrossLab Fittings for HPLC, Agilent Technologies - 0100-1631, Swagelok fitting, PEEK, RheFlex 2-piece fittings, 1.6 mm int.Ø

CrossLab LC/MSD Supplies for HPLC, Agilent Technologies - 0100-1619, Zero dead-volume union, 0.010 IN. thru-hole, stainless steel

CrossLab CE and CE/MS Fittings and Connectors, Agilent Technologies - 0100-1543, Fingertight fitting and ferrule, two-piece, PEEK, 10-32, for ¹/16 IN. ext.Ø tubing

CrossLab Flexible Metal Ferrules for GC, Agilent Technologies - 0100-1490, Ferrule, front/back, ¹/16 IN., stainless steel

CrossLab Column Nuts for GC, Agilent Technologies - 0100-1378, Front ferrule, ¹/4 IN. PTFE, max. 250 °C

CrossLab Column Nuts for GC, Agilent Technologies - 0100-1375, Front ferrule, ¹/16 IN. PTFE, max. 250 °C

CrossLab Column Nuts for GC, Agilent Technologies - 0100-1365, Ferrule, one-piece, ¹/8 IN. PTFE

Crosslab Graphite/Vespel Ferrules for GC, Agilent Technologies - 0100-1332, Straight ferrule, 3.2 mm Int.Ø ¿ IN., 15% graphite/85% Vespel, maximum 350 °C

Crosslab Gas Chromatography (GC) Interface Supplies for ICP-MS, Agilent Technologies - 0100-1331, One-piece ferrule, ¹/4 IN., 15% Graphite/85% Vespel

CrossLab Graphite Ferrules for GC, Agilent Technologies - 0100-1325, Front ferrule, ¹/8 IN. graphite, max. 450 °C

Crosslab Graphite Ferrules for GC, Agilent Technologies - 0100-1324, Front ferrule, 6.35 mm Int.Ø, ¼ IN., graphite, maximum 450 °C

CrossLab Flow Through Cells for UV-Vis and UV-Vis-NIR Systems, Agilent Technologies - 0100-1225, Flow cell, round aperture, M6 threaded inlet and outlet ports

CrossLab GC Fittings, Agilent Technologies - 0100-0969, Tee, ¹/16 IN., stainless steel 316, low dead volume

UNION ZERO-DEAD-VOLUME SS W/2 FITTINGS - 0100-0900, Zero-dead-volume union, 1.6 mm Int.Ø, stainless steel, with two fittings, 10-32 to 10-32, female/female

CrossLab GC Fittings, Agilent Technologies - 0100-0542, Tee, ¹/8 IN., stainless steel

Crosslab GC Fittings, Agilent Technologies - 0100-0161, Cross union, ¿ IN. brass

CrossLab GC Fittings, Agilent Technologies - 0100-0128, Union, ¹/4 IN., stainless steel

CrossLab GC Fittings, Agilent Technologies - 0100-0124, Union, ¹/16 IN., stainless steel

CrossLab Gas Cylinder Supplies, Agilent Technologies - 0100-0119, Adapter fitting, 1/4 IN. female NPT to 1/4 IN., brass

CrossLab Gas Cylinder Supplies, Agilent Technologies - 0100-0118, Adapter fitting, 1/4 IN. female NPT to 1/8 IN., brass

CrossLab Gas Cylinder Supplies, Agilent Technologies - 0100-0111, Adapter fitting, ¹/8 IN. male NPT to ¹/8 IN., stainless steel

CrossLab Gas Cylinder Supplies, Agilent Technologies - 0100-0110, Adapter fitting, ¹/8 IN. male NPT to ¹/8 IN., brass

CrossLab GC Fittings, Agilent Technologies - 0100-0091, Elbow union, ¹/8 IN., brass

Crosslab GC Fittings, Agilent Technologies - 0100-0090, Tee, ¿ IN. brass

CrossLab GC Fittings, Agilent Technologies - 0100-0088, Tee, ¹/4 IN., brass

CrossLab GC Fittings, Agilent Technologies - 0100-0071, Cap, ¹/8 IN., stainless steel

CrossLab GC Fittings, Agilent Technologies - 0100-0053, Nut, ¹/16 IN., stainless steel

Selerity Secure-fit tubing and fittings. Strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Selerity Secure-fit tubing and fittings. A strong metal spring which presses against a collar that is brazed to the tubing. The connections will self-adjust within any standard 10-32 HPLC fitting and hold pressures up to 10,000psi.

Pelitier cooling assembly. to be used with a Caloratherm mobile phase conditioner

Heating element. with temperature sensor to be used with Caloaratherm mobile phase conditioner

Caloratherm. The Caloratherm mobile phase conditioner is designed to actively preheat mobile phase before entering a column that is placed in a HPLC column heater. Matching the mobile phase temperature to the column temperature is very important in obtaining narrow peak widths when performing HPLC analysis. In order to optimize efficiency, the Caloratherm preheater senses the temperature of incoming mobile phase before entering the column, this allows the temperature to be monitored and the appropriate amount of power can be input to reach the desired set point. A single device is suitable to accommodate controlled heating for a wide range of flows and mobile phase compositions over a large range of temperatures. The heater is controlled through feedback from the temperature sensor automat....

Vpac Chloride.

Vpac Base.

Vpac Acid.

Easydirect, 3 Instruments.

Kf Vessel Set.

Easystir - Gt.

Weigh Boat/Stopper Set.

Tubing Set, Easypump.

Easypump.

Bottle Head.

Burette, 10 Ml.

Kit- Lc/Hplc General Starter.

Tfe Tube Assy 1/8X0.095Id 1Ft.

Tubing Inlet 12Gx250Mm.

Tfe Tubing 1/8Odx1/16Id.

Fep Tube Assy 114X28 22Aug.

Syringe Multi-Pk 800Sr10-250Ul.

Pipet Control 0010 1Ml.

Software Ml560.

Replacement Tube Holder.

Repl Barrel W/Needle 1810N.

Repl Barrel W/Needle 1802N.

Plunger Assy G.T. 25Ul.

Plunger Assy,G.T. 100Ul.

Plunger Assy G.T. 50Ul.

Syringe W/Pt3 7102Nwg-2.0Ul.

Syringe W/Pt 37102Nch-2.0Ul .

Syringe 7002Khch W/Chaney 2Ul.

Syringe 7000.5Khwg 0.5Ul.

Syrng,Mult-Pk,Wtrs,800Series.

Syringe Pipette 12-Channel.

Syr Luer Tip 1002Ltch-2.5Ml.

Syringe 701Rnch 10Ul.

Syringe Fixd Needle 51Mm 10Ul.

Syringe 1701Nch Gastight 10Ul.

Chromatog Ndl. 47Mmod Ctfe Hub.

Chromatog Ndl. 53Mmod Ctfe Hub.

Needle Chromatogry. 74Mmod Pk6.

Hypo Ndl 29Ga Ctfe Hub Pt2X2in.

Ndl Hp19Ga Ctfe Hub Pt2X2Inpk6.

Ndl Hp17Ga Ctfe Hub Pt2X2Inpk6.

Hypo Ndl 14Ga Ctfe Hub Pt2X2in.

Chromatog Ndl.53 Mmod Ctfe Hub.

72822 Ndl Chromat. 74Mm Od Pk6.

Needle Kf719 Pt5 Pk6.

Needle N710 2.0 Pt5 Pk6.

Needle N714 2.0 Pt5 Pk6.

Needle N715 2.0 Pt5 Pk6.

Needle N716 2.0 Pt5 Pk6.

Needle N717 2.0 Pt5 Pk6.

Cable 5M S7/Din.

25MM PLUNGER TIP, O-RING SEAL, INCLUDES FILTER DISC AND O-RINGS.

13385 GAUGE, Pressure. 1/8 - 1/8 FEMALE/FEMALE NPT STAINLESS STEEL COUPLING 1.5 LONG.

9571 MICROSCALE ADAPTER, Gow-Mac, Stainless Steel. ADAPTER S-S FOR G-M #350 FEM NPT - 5/5F.

9571 MICROSCALE ADAPTER, Gow-Mac, Stainless Steel. ADAPTER S-S FOR G-M #150 FEM NPT - 5/5F.

5918 CHROMATOGRAPHIC INDICATOR SPRAY. CHROMATOGRAPHY SPRAY COMPLETE.

5918 CHROMATOGRAPHIC INDICATOR SPRAY. CAN OF PROPELLENT ONLY.

5918 CHROMATOGRAPHIC INDICATOR SPRAY. PLASTIC JAR ONLY.

5917 CHROMATOGRAPHIC SPRAY. 10CC PER MIN CHROMATOGRAPHY SPRAY.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. 3L 50X300 RAPID PREP.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. 2L 25X300 RAPID PREP.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. 3L 50XC300 RAPID PRESSURE.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. 2L 25X300 RAPID PREP.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. PTFE BALL.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. BRASS CONNECTION 1/8 TUBE-TO-1/4FEMALE NPT.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. BRASS CONNECTION.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. BRASS VALVE.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. QUICK CONN-DISC B-QC4-B-2PM /B-QC4-S-2PM.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. 3000ML RESERVOIR.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. 2000ML RESERVOIR.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. GLASS MANIFOLD.

5877 RAPID PREPARATIVE CHROMATOGRAPHY SYSTEM. BRASS MANIFOLD.

5860 COLUMN HEAD. 6,#50,#15 COLUMN HEAD.

5860 COLUMN HEAD. 4,#50 COLUMN HEAD.

TORCH FIXED SPECTROFLAME 1.8MM STANDARD - VHG-GSP-05

TORCH BODY ELAN - VHG-GSC4-10

TORCH BONNET VHG-GPE1-25 - VHG-GPE1-25

TORCH BODY OPTIMA 2000/4000/5000/7000DV - VHG-GPE1-16

TORCH BONNET VHG-GPE1-15 - VHG-GPE1-15

TORCH BONNET FLATEDGE (OPTIMA POST 9/94) - VHG-GPE1-13

TORCH 2.5MM INJECTOR 2 PROJ HMI COMPATIB - VHG-GHP-01

SYMLINE LISA WASTE FUNNEL BUNDLE 20 - 75355

SYMLINE LISA WASTE FUNNEL BUNDLE 10 - 75354

SYMLINE ARNOLD WASTE FUNNEL BUNDLE 20 - 75353

SYMLINE ARNOLD WASTE FUNNEL BUNDLE 10 - 75352

SYMLINE MARCO WASTE FUNNEL BUNDLE 20 - 75351

SYMLINE MARCO WASTE FUNNEL BUNDLE 10 - 75350

SYMLINE WALL WASTE BUNDLE FOR 5-6 HPLC - 75312

SYMLINE WALL WASTE BUNDLE FOR 3-4 HPLC - 75311

SYMLINE WALL WASTE BUNDLE FOR 1-2 HPLC - 75310

SYMLINE TABLE WASTE BUNDLE FOR 5-6 HPLC - 75302

SYMLINE TABLE WASTE BUNDLE FOR 3-4 HPLC - 75301

SYMLINE TABLE WASTE BUNDLE FOR 1-2 HPLC - 75300

WASTE BUNDLE FOR JUSTRITE (CPC) - 75209

WASTE BUNDLE FOR JUSTRITE (STAINESS) - 75208

LISA WASTE FUNNEL BUNDLE TYPE 20 - 75207

LISA WASTE BUNDLE TYPE 20 - 75206

ARNOLD WASTE FUNNEL BUNDLE TYPE 20 - 75205

ARNOLD WASTE FUNNEL BUNDLE TYPE 10 - 75204

MARCO WASTE FUNNEL BUNDLE TYPE 20 - 75203

MARCO WASTE FUNNEL BUNDLE TYPE 10 - 75202

BASIC WASTE BUNDLE TYPE 20 - 750201

BASIC WASTE BUNDLE TYPE 10 - 75200

HPLC STARTER BUNDLE JUSTRITE (CPC) - 75104

HPLC STARTER BUNDLE JUSTRITE (STAINLESS) - 75103

HPLC STARTER BUNDLE PLUS WITH FUNNEL - 75102

HPLC STARTER BUNDLE PLUS TYPE 20 - 75101

HPLC STARTER BUNDLE TYPE 20 - 75100

POWER SUPPLY USA 220/230V TYPE 2 - 610704

SWC LISA V3.0 - EXTENSION FUNNEL EC - 450120

SWC LISA V3.0 - PLUG SATELLITE - 350110

WASTE DISPOSAL-SET 4 V2.0 PK=SET - 307321

POWER SUPPLY USA 220/230V TYPE 1 - 108328

UV FLOW CELL FOR LC-UV - P300110

STATIC MIXER FOR LC-UV - P300100

PLATE TOP FOR LC-UV - P300064

COVER FRONT FOR LC-UV - P300006

ACRYLIC TOP FOR LC-UV - P300005

ACRYLIC BASE FOR LC-UV - P300004

SHELL RIGHT FOR LC-UV - P300003

SHELL REAR FOR LC-UV - P300002

TURN TABLE SHELL FOR LC-UV - P300000-3

SHELL FRONT FOR LC-UV - P300000

LAPTOP FOR LC-UV - P100500-3

STARTER COLUMN FOR LC-UV - NP-1429

SYSTEM ACCESSORIES FOR LC-UV - NP-1428

Z AXIS MOTOR FOR LC-UV - E300260-1

Z AXIS OPTICAL SENSOR FOR LC-UV - E300240-1

LEAK SENSOR FOR LC-UV - E300220

I/O BOARD FOR LC-UV - E300100

ACCESSORY KIT FOR LC-UV - A300101

DOOR ASSEMBLY FOR LC-UV - A300022

SOLVENT RACK ASSEMBLY FOR LC-UV - A300011

ACRYLIC TOP ASSEMBLY FOR LC-UV - A300002

ACRYLIC BASE ASSEMBLY FOR LC-UV - A300001

CHROM SYSTEM PURE W PUMP+FRACTION COLL - 11C90020

CHROMATOGRAPHY SYSTEM PURE ESSENTIAL - 11C90010

UV DETECTOR PURE - 11C10700

FRACTION COLLECTOR PURE - 11C10600

DOOR FRACTION COLLECTOR FOR FUNNEL RACK - 11075388

FUNNEL SET GLASS PK8 - 11074939

RACK TYPE 13 COLLECTION JARS PURE - 11074894

RACK TYPE 14 3 FLASKS PURE - 11074484

RACK TYPE 12 8 FUNNELS PURE - 11074402

RACK TYPE 11 18X150MM TUBES PURE - 11074056

RACK TYPE 10 16X150MM TUBES PURE - 11074055

CARTRIDGE STAND FOR PURE ESSENTIAL - 11072733

WORKSTATION - EZCHROM EDITION - OPL-2001

ASSEMBLY PRECOLUMN FILTER 2UM - AN0-9490

COLUMN BEVERAGE ANALYSIS 7 COMPONENT - AN0-9486

VIAL INSERTS 300UL GLASS PK100 - AN0-2313

VIAL 1.5ML CLEAR PRE-SLIT SEPTA PK100 - AN0-2312

BOTTLE FOR SOLVENT 1L W/CAP - AN0-1777

SAMPLE LOOP FOR 7725I - 5UL - AN0-0461

PC WITH WINDOWS 10 - AN0-0150

MONITOR LCD WIDESCREEN - AN0-0104

KIT AAA PH STARTER 5-BUFFER KIT - MKT-8806

STANDARD BEVERAGE ANALYSIS 7 COMPONENT - AN0-5052

MOBILE PHASE BEVERAGE ANALYSIS 1L - AN0-5051

STANDARD CALIBRATION PROTEIN HYDROLYSATE - AAA-SPH

FILTER SOLVENT INLET SST 12-14UM - 01090-60008

KIT CAPILLARY 0.17MM ID COLUMN SELECTION - 5067-6707

CELL MAX-LIGHT CARTRIDGE LSS 10 MM - G7117-60020

FLOW CELL STANDARD RFID 10MM 13UL 120BAR - G1315-60022

LAMP DEUTERIUM 8-PIN W/RFID TAG FOR DAD - 5190-0917

LAMP DEUTERIUM WITH RFID TAG FOR DAD/MWD - 2140-0820

Calcium Fluoride Circular Optical Windows, Firebird Optics - CAF2-25X4, CaF2 optical windows

Calcium Fluoride Circular Optical Windows, Firebird Optics - CAF2-13X2, CaF2 optical windows

Calcium Fluoride Circular Optical Windows, Firebird Optics - CAF2-6X1, CaF2 optical windows

Barium Fluoride Circular Optical Windows, Firebird Optics - BAF2-38X6, BaF2 optical windows

Barium Fluoride Circular Optical Windows, Firebird Optics - BAF2-25X4, BaF2 optical windows

Barium Fluoride Circular Optical Windows, Firebird Optics - BAF2-13X2, BaF2 optical windows

Zinc Selenide Circular Optical Windows, Firebird Optics - ZNSE-32X3, ZnSe optical windows

Zinc Selenide Circular Optical Windows, Firebird Optics - ZNSE-25X4, ZnSe optical windows

Zinc Selenide Circular Optical Windows, Firebird Optics - ZNSE-13X2, ZnSe optical windows

Potassium Bromide Circular Optical Windows, Firebird Optics - KBR-49X6, KBr optical windows

Potassium Bromide Circular Optical Windows, Firebird Optics - KBR-38X6, KBr optical windows

Potassium Bromide Circular Optical Windows, Firebird Optics - KBR-32X3, KBr optical windows

Potassium Bromide Circular Optical Windows, Firebird Optics - KBR-25X4, KBr optical windows

Potassium Bromide Circular Optical Windows, Firebird Optics - KBR-13X2, KBr optical windows

KIT SEAL ROTOR SF REBUILD RHEODYNE 7010 - AN0-0819

FILTER DRAIN VALVE FOR HPLC PUMPS - 638-1423

D2 LAMP FOR HPLC DETECTORS - 892-2550

SEAL L-2200 INJECTION VALVE F/AUTOSAMPLR - 890-3243

SEAL L-7250 INJECTION PORT F/AUTOSAMPLER - 080-3040

SEAL L-2200 INJECTION PORT F/AUTOSAMPLER - 890-3183

SEAL PLUNGER FOR THE L-2130 PUMP - 655-1080

VALVE L-2130 REPLACEMENT OUTLET CHECK - AN0-0837

VALVE L-2130 REPLACEMENT INLET CHECK - AN0-0836

KIT SEAL ROTOR REBUILD FOR RHEODYNE 7010 - AN0-0818

INJECTOR MANUAL STAINLESS STEEL - AN0-0459

AMINO ACID ANALYZER PH5 BUFFER - AN0-5045

AMINO ACID ANALYZER PH4 BUFFER - AN0-5044

AMINO ACID ANALYZER PH3 BUFFER - AN0-5043

AMINO ACID ANALYZER PH2 BUFFER - AN0-5042

LOOP SAMPLE 0.55X0.62MM - 852-2084

VALVE INLET CHECK ON PUMP - 8L0-1497

SEAL PURGE VALVE - 852-8120

FILTER AMMONIA COLUMN - AN0-8862

SYRINGE ON AUTOSAMPLER 0.5ML - AN0-3230

FILTER PRE COLUMN - AN0-8855

WASH SEAL AMINO ACID ANALYZER F/PUMP - 855-5034

PUMP SEAL AMINO ACID ANALYZER - 855-5030

COLUMN HIGH RESOLUTION PF TWIN - 855-4420

COLUMN HIGH RESOLUTION PH TWIN - 855-4360

BOX CHROMASTER INTERFACE W/IFC/AID BOARD - 892-0956

VALVE 6COLUMN SELECTOR F/CHROMASTER 6310 - 889-0609

KIT 2L BOTTLE - 8L0-0130

System Accessories for Primaideâ„¢ HPLC System, VWR Hitachi - 8DD-0767, Primaideâ„¢ HPLC 60 W AC adapter

System Accessories for Primaideâ„¢ HPLC System, VWR Hitachi - 8DD-0757, Primaideâ„¢ HPLC 150 W AC adapter

Primaideâ„¢ Options for Main Modules for HPLC System, VWR Hitachi - 8DD-0730, Primaideâ„¢ HPLC UI control keypad forPrimaideâ„¢ PM1310 column ovens

Primaideâ„¢ Options for Main Modules for HPLC System, VWR Hitachi - 8DD-0720, Primaideâ„¢ HPLC UI control keypad forPrimaideâ„¢ PM1210 autosamplers

Primaideâ„¢ HPLC System, VWR-HITACHI - 8DD-0705, HPLC USB interface board for communication between Primaideâ„¢ modules and PC

Primaideâ„¢ Options for Main Modules for HPLC System, VWR Hitachi - 8DD-0654, Primaideâ„¢ HPLC pump seal washing kit, for Primaideâ„¢ PM1110 pumps

Primaideâ„¢ Options for Main Modules for HPLC System, VWR Hitachi - 8DD-0644, Primaideâ„¢ HPLC low pressure gradient accessory with mixer, for Primaideâ„¢ PM1110 pumps

Primaideâ„¢ Options for Main Modules for HPLC System, VWR Hitachi - 8DD-0634, Primaideâ„¢ HPLC solvent degasser for Primaideâ„¢ PM1110 pumps

ANALOG OUTPUT BOARD FOR FL - 8DD-0530

Accessories for HPLC System, Chromaster, VWR Hitachi - 892-0966, Chromaster HPLC interface box (S). AC adapter (60 W) is required

Accessories for HPLC System, Chromaster, VWR Hitachi - 892-0854, Chromaster HPLC AC adapter (150 W)

Accessories for HPLC System, Chromaster, VWR Hitachi - 892-0851, Chromaster HPLC AC adapter (60 W)

Accessories for HPLC System, Chromaster, VWR Hitachi - 892-0536, Chromaster HPLC semi-micro flow cell, 2175.5 psi, 3.2 µl, 5 mm kit including flexible capillary set

Accessories for HPLC System, Chromaster, VWR Hitachi - 892-0527, Chromaster HPLC high pressure semi-micro flow cell, 150 bar, 3.2 µl, 5 mm

Accessories for HPLC System, Chromaster, VWR Hitachi - 892-0517, Chromaster HPLC high pressure semi-micro flow cell, 150 bar, 3.2 µl, 5 mm for 5410 UV detectors and 5420 UV/Vis detectors

FLOW CELL UNIT SEMI-MICRO FOR 5410/5420 - 892-0516

COLUMN MANAGEMENT SYSTEM FOR 5310 - 892-0324

SYRINGE KIT 2.5ML F/5280 SYRINGE PIPING - 892-0315

Accessories for HPLC System, Chromaster, VWR Hitachi - 892-0246, Chromaster HPLC sample rack for 2×96-well or 384-well microtitre plates for the Chromaster 5210 and 5260 autosamplers

PLUNGER WASHING PUMP FOR 5110/5160 - 892-0164

LOW-PRESSURE GRADIENT UNIT FOR 5110/5160 - 892-0154

COLUMN 2620 MSC PH SPECIAL ANALYSIS - 855-4516

COLUMN PF ANALYSIS HIGH SPEED AAA - 855-4515

COLUMN AMMONIA STANDARD - 855-3523

MINI-DIN CABLE 6FT SINGLE END 8 CONDUCTR - 27339

Indicator Color F/Carbon Vapor Filter. Color Indicator for activated carbon vapor filters, Material: Acrylic, Use With: VapLock activated carbon exhaust filters, Pack of 5

Diba Chromatography Column Frit, Inside Diameter: 6.6 mm, 20 um, Wetted Material: PTFE.

Diba Omnifit EZ SolventPlus Chromatography Column 50 x 500 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 75 Psi, Dimension: 50 x 500 mm, Total volume capacity: 941.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 50x500mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 75psi, Dimension: 50x500mm, Total volume: 781.2-941.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 50x500mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 75psi, Dimension: 50x500mm, Total volume capacity: 620.9-941.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 50 x 400 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 75 Psi, Dimension: 50 x 400 mm, Total volume capacity: 741.1ml

Diba Omnifit EZ SolventPlus Chromatography Column 50x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 75psi, Dimension: 50x400mm, Total volume: 580.9-741.1ml

Diba Omnifit EZ SolventPlus Chromatography Column 50x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 75psi, Dimension: 50x400mm, Total volume capacity: 420.6-741.1ml

Diba Omnifit EZ SolventPlus Chromatography Column 50 x 330 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 75 Psi, Dimension: 50 x 330 mm, Total volume capacity: 600.9ml

Diba Omnifit EZ SolventPlus Chromatography Column 50x330mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 75psi, Dimension: 50x330mm, Total volume: 440.7-600.9ml

Diba Omnifit EZ SolventPlus Chromatography Column 50x330mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 75psi, Dimension: 50x330mm, Total volume capacity: 280.4-600.9ml

Diba Omnifit EZ SolventPlus Chromatography Column 50 x 250 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 75 Psi, Dimension: 50 x 250 mm, Total volume capacity: 440.7ml

Diba Omnifit EZ SolventPlus Chromatography Column 50x250mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 75psi, Dimension: 50x250mm, Total volume: 280.4-440.7ml

Diba Omnifit EZ SolventPlus Chromatography Column 35 x 400 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150 Psi, Dimension: 35 x 400 mm, Total volume capacity: 356ml

Diba Omnifit Chromatography Column O-Ring, Chemraz Inside diameter: 50 mm, Wetted Material: FFKM.

Diba Omnifit Chromatography Column O-Ring, Chemraz Inside diameter: 35 mm, Wetted Material: FKM.

Diba Omnifit Chromatography Column O-Ring, Chemraz Inside diameter: 35 mm, Wetted Material: FFKM.

Diba Omnifit Chromatography Column O-Ring, Chemraz Inside diameter: 25 mm, Wetted Material: FKM.

Diba Omnifit Chromatography Column O-Ring, Chemraz Inside diameter: 25 mm, Wetted Material: FFKM.

Diba Omnifit Chromatography Column O-Ring, Inside diameter: 3mm, Wetted Material: FFKM.

Diba Omnifit Chromatography Column O-Ring, Inside diameter: 15mm, Wetted Material: FFKM.

Diba Omnifit Chromatography Column O-Ring, Inside diameter: 15 mm, Wetted Material: FFKM.

Diba Omnifit Chromatography Column O-Ring, Chemraz Inside diameter: 10 mm, Wetted Material: FKM.

Diba Omnifit EZ SolventPlus Chromatography Column 35 x 250 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150 Psi, Dimension: 35 x 250 mm, Total volume capacity: 211.7ml

Diba Omnifit EZ SolventPlusChromatography Column 35x250mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 35x250mm, Total volume: 134.7-211.7ml

Diba Omnifit EZ SolventPlus Chromatography Column 35x250mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 35x250mm, Total volume capacity: 57.7-211.7ml

Diba Omnifit EZ SolventPlus Chromatography Column 35 x 150 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150 Psi, Dimension: 35 x 150 mm, Total volume capacity: 115.5ml

Diba Omnifit EZ SolventPlus Chromatography Column 35x150mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 35x150mm, Total volume: 38.5-115.5ml

Diba Omnifit EZ SolventPlus Chromatography Column 35x150mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 35x150mm, Total volume capacity: 2.3-115.5ml

Diba Omnifit EZ SolventPlus Chromatography Column 25 x 500 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150 Psi, Dimension: 25 x 500 mm, Total volume capacity: 230.7ml

Diba Omnifit EZ SolventPlusChromatography Column 25x500mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 25x500mm, Total volume: 191.4-230.7ml

Diba Omnifit EZ SolventPlus Chromatography Column 25x500mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 25x500mm, Total volume capacity: 152.2-230.7ml

Diba Omnifit EZ SolventPlus Chromatography Column 25 x 400 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150 Psi, Dimension: 25 x 400 mm, Total volume capacity: 181.6ml

Diba Omnifit EZ SolventPlusChromatography Column 25x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 25x400mm, Total volume: 142.4-181.6ml

Diba Omnifit EZ SolventPlus Chromatography Column 25x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 25x400mm, Total volume capacity: 103.1-181.6ml

Diba Omnifit EZ SolventPlus Chromatography Column 25 x 330 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150 Psi, Dimension: 25 x 330 mm, Total volume capacity: 147.3ml

Diba Omnifit EZ SolventPlusChromatography Column 25x330mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 25x330mm, Total volume: 108.0-147.3ml

Diba Omnifit EZ SolventPlus Chromatography Column 25x330mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 25x330mm, Total volume capacity: 68.7-147.3ml

Diba Omnifit EZ SolventPlus Chromatography Column 6.6 x 150 mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6 x 150 mm, Operating Temperature: 4 to 40 degC, Total Volume: 4.1mL

Diba Omnifit EZ SolventPlus Chromatography Column 6.6x150mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 1 Fixed/1 Adjustable Endpieces, PEEK column thread, Materials: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6x150mm, Operating Temperature: 4-40 degC, Total Volume: 1.4-4.1mL

Diba Omnifit EZ SolventPlus Chromatography Column 6.6 x 150mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6x150 mm, Operating Temperature: 4 to 40 degC, Total Volume: 0.1-4.1 mL

Diba Omnifit EZ SolventPlus Chromatography Column 6.6 x 100 mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6 x 100 mm, Operating Temperature: 4 to 40 degC, Total Volume: 2.4 mL

Diba Omnifit EZ SolventPlus Chromatography Column 6.6x100mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 1 Fixed/1 Adjustable Endpieces, PEEK column thread, Materials: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6x100mm, Operating Temperature: 4-40 degC, Total Volume: 0.1-2.4mL

Diba Omnifit EZ SolventPlus Chromatography Column 6.6 x 100mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6x100mm, Operating Temperature: 4 to 40 degC, Volume: 0.1 to 2.4 mL

Diba Omnifit EZ SolventPlus Chromatography Column 6.6 x 50 mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6 x 50 mm, Operating Temperature: 4 to 40 degC, Total Volume: 0.7 mL

Diba Omnifit EZ SolventPlus Chromatography Column 6.6x50mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 1 Fixed/1 Adjustable Endpieces, PEEK column thread, Materials: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6x50mm, Operating Temperature: 4-40 degC, Total Volume: 0.1-0.7mL

Diba Omnifit EZ SolventPlus Chromatography Column 6.6 x 50mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6 x 50 mm, Operating Temperature: 4 to 40 degC, Total Volume: 0.1-0.7 mL

Diba Omnifit EZ Chromatography Column 50 x 500 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 75 Psi, Dimensions: 50 x 500 mm, Operating Temperature: 4 to 40 degC, Volume: 941.4 mL

Diba Omnifit EZ Chromatography Column 50x500mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed/1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 75Psi, Dimensions: 50x500mm, Operating Temperature: 4-40 degC, Volume: 781.2-941.4mL

Diba Omnifit EZ Chromatography Column 50x500mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 75 Psi, Dimensions: 50x500 mm, Operating Temperature: 4 to 40 degC, Volume: 620.9-941.4mL

Diba Omnifit EZ Chromatography Column 50 x 400 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 75 Psi, Dimensions: 50 x 400 mm, Operating Temperature: 4 to 40 degC, Volume: 741.1 mL

Diba Omnifit EZ Chromatography Column 50x400mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 75Psi, Dimensions: 50x400mm, Operating Temperature: 4-40 degC, Volume: 580.9-741.1mL

Diba Omnifit EZ Chromatography Column 50 x 330 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 75 Psi, Dimensions: 50 x 330 mm, Operating Temperature: 4 to 40 degC, Volume: 600.9 mL

Diba Omnifit EZ Chromatography Column 50x330mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 75Psi, Dimensions: 50x330mm, Operating Temperature: 4-40 degC, Volume: 440.7 to 600.9mL

Diba Omnifit EZ Chromatography Column 50 x 250 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 75 Psi, Dimensions: 50 x 250 mm, Operating Temperature: 4 to 40 degC, Volume: 440.7 mL

Diba Omnifit, EZ SolventPlus, Fixed Column Endpiece, Inner Diameter: 50 mm.

Diba Omnifit, EZ SolventPlus, Fixed Column Endpiece, Inner Diameter: 35 mm.

Diba Omnifit, EZ SolventPlus, Fixed Column Endpiece, Inner Diameter: 25 mm.

Diba Omnifit, EZ SolventPlus, Fixed Column Endpiece, Inner Diameter: 15 mm.

Diba Omnifit, EZ SolventPlus, Fixed Column Endpiece, Inner Diameter: 10 mm.

Diba Omnifit, EZ SolventPlus, Fixed Column Endpiece, Inner Diameter: 6.6 mm.

Diba Omnifit, EZ SolventPlus, Adjustable Column Endpiece, Inner Diameter: 50 mm.

Diba Omnifit, EZ SolventPlus, Adjustable Column Endpiece, Inner Diameter: 25 mm.

Diba Omnifit, EZ SolventPlus, Adjustable Column Endpiece, Inner Diameter: 10 mm.

Diba Omnifit, EZ SolventPlus, Adjustable Column Endpiece, Inner Diameter: 6.6 mm.

Diba Omnifit EZ Replacement Glass 50 x 500 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 50 x 500 mm

Diba Omnifit EZ Replacement Glass 50 x 400 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 50 x 400 mm

Diba Omnifit EZ Replacement Glass 50 x 330 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 50 x 330 mm

Diba Omnifit EZ Replacement Glass 50 x 250 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 50 x 250 mm

Diba Omnifit EZ Replacement Glass 35 x 330 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 35 x 330 mm

Diba Omnifit EZ Replacement Glass 25 x 400 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 25 x 400 mm

Diba Omnifit EZ Replacement Glass 25 x 330 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 25 x 330 mm

Diba Omnifit EZ Replacement Glass 25 x 150 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 25 x 150 mm

Diba Omnifit EZ Replacement Glass 25 x 100 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 25 x 100 mm

Diba Omnifit EZ Replacement Glass 15 x 500 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 15 x 500 mm

Diba Omnifit EZ Replacement Glass 15 x 330 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 15 x 330 mm

Diba Omnifit EZ Replacement Glass 10 x 500 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 10 x 500 mm

Diba Omnifit EZ Replacement Glass 10 x 400 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 10 x 400 mm

Diba Omnifit EZ Replacement Glass 10 x 330 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 10 x 330 mm

Diba Omnifit EZ Replacement Glass 6.6 x 400 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 6.6 x 400 mm

Diba Omnifit EZ Replacement Glass 6.6 x 150 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 6.6 x 150 mm

Diba Omnifit Chromatography Column O-Ring, Chemraz Inside diameter: 10 mm, Wetted Material: FFKM.

Diba Omnifit Chromatography Column O-Ring, Chemraz Inside diameter: 6.6mm, Wetted Material: FFKM.

Diba Omnifit EZ Chromatography Column 50x250mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 75Psi, Dimensions: 50x250mm, Operating Temperature: 4-40 degC, Volume: 280.4 to 440.7ml

Diba Omnifit EZ Chromatography Column 50 x 250mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 75 Psi, Dimensions: 50 x 250 mm, Operating Temperature: 4-40 degC, Total Volume: 120.2-440.7 mL

Diba Omnifit EZ Chromatography Column 35 x 400 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 35 x 400 mm, Operating Temperature: 4 to 40 degC, Volume: 356 mL

Diba Omnifit EZ Chromatography Column 35x400mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150Psi, Dimensions: 35x400mm, Operating Temperature: 4-40 degC, Volume: 279 to 356 mL

Diba Omnifit EZ Chromatography Column 25 x 150 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 25 x 150 mm, Operating Temperature: 4 to 40 degC, Volume: 58.9 mL

Diba Omnifit EZ Chromatography Column 25 x 100 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 25 x 100 mm, Operating Temperature: 4 to 40 degC, Volume: 34.4 mL

Diba Omnifit EZ Chromatography Column 25 x 100mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 25 x 100 mm, Operating Temperature: 4 to 40 degC, Volume: 1.2 to 34.4 mL

Diba Omnifit EZ Chromatography Column 15 x 500 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300 Psi, Dimensions: 15 x 500 mm, Operating Temperature: 4 to 40 degC, Total Volume: 0 - 0.4 mL

Diba Omnifit EZ Chromatography Column 15x500mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300Psi, Dimensions: 15x500mm, Operating Temperature: 4-40 degC, Volume: 68.9 to 83.1 mL

Diba Omnifit EZ Chromatography Column 15 x 500mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300 Psi, Dimensions: 15 x 500 mm, Operating Temperature: 4 to 40 degC, Volume: 54.8 to 83.1 mL

Diba Omnifit EZ Chromatography Column 15 x 400 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300 Psi, Dimensions: 15 x 400 mm, Operating Temperature: 4 to 40 degC, Total Volume: 51.2 to 65.4 mL

Diba Omnifit EZ Chromatography Column 15x400mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300Psi, Dimensions: 15x400mm, Operating Temperature: 4-40 degC, Volume: 51.2 to 65.4 mL

Diba Omnifit EZ Chromatography Column 15 x 400mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300 Psi, Dimensions: 15 x 400 mm, Operating Temperature: 4 to 40 degC, Volume: 37.1 to 65.4 mL

Diba Omnifit EZ Chromatography Column 15 x 330 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300 Psi, Dimensions: 15 x 330 mm, Operating Temperature: 4 to 40 degC, Total Volume: 53 mL

Diba Omnifit EZ Chromatography Column 15x330mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300Psi, Dimensions: 15x330mm, Operating Temperature: 4-40 degC, Volume: 38.9 to 53.0mL

Diba Omnifit EZ Chromatography Column 15 x 250 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300 Psi, Dimensions: 15 x 250 mm, Operating Temperature: 4 to 40 degC, Total Volume: 38.9 mL

Diba Omnifit EZ Chromatography Column 15x250mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300Psi, Dimensions: 15x250mm, Operating Temperature: 4-40 degC, Volume: 24.7 to 38.9mL

Diba Omnifit EZ Chromatography Column 15 x 250mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300 Psi, Dimensions: 15 x 250 mm, Operating Temperature: 4 to 40 degC, Volume: 10.6 to 38.9 mL

Diba Omnifit EZ Chromatography Column 15 x 150mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300 Psi, Dimensions: 15 x 150 mm, Operating Temperature: 4 to 40 degC, Volume: 0.4 to 21.2 mL

Diba Omnifit EZ Chromatography Column 15 x 100 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 300 Psi, Dimensions: 15 x 100 mm, Operating Temperature: 4 to 40 degC, Total Volume: 12.4 mL

Diba Omnifit EZ Chromatography Column 5 x 100 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 5 x 100 mm, Operating Temperature: 4 to 40 degC, Total Volume: 1.4 mL

Diba Chromatography Column Frit, Inside Diameter: 50 mm, 50 um, Wetted Material: PTFE.

Diba Chromatography Column Frit, Inside Diameter: 50 mm, 30 um, Wetted Material: PTFE.

Diba Chromatography Column Frit, Inside Diameter: 50 mm, 25 um, Wetted Material: PE.

Diba Chromatography Column Frit, Inside Diameter: 50 mm, 10 um, Wetted Material: PTFE.

Diba Chromatography Column Frit, Inside Diameter: 35 mm, 50 um, Wetted Material: PTFE.

Diba Chromatography Column Frit, Inside Diameter: 35 mm, 5 um, Wetted Material: PTFE.

Diba Chromatography Column Frit, Inside Diameter: 25 mm, 30 um, Wetted Material: PTFE.

Diba Chromatography Column Frit, Inside Diameter: 25 mm, 25 um, Wetted Material: PE.

Diba Chromatography Column Frit, Inside Diameter: 25 mm, 10 um, Wetted Material: PTFE.

Diba Chromatography Column Frit, Inside Diameter: 15 mm, 50 um, Wetted Material: PTFE.

Diba Chromatography Column Frit, Inside Diameter: 15 mm, 25 um, Wetted Material: PE.

Diba Chromatography Column Frit, Inside Diameter: 10 mm, 50 um, Wetted Material: PTFE.

Diba Chromatography Column Frit, Inside Diameter: 10 mm, 5 um, Wetted Material: PTFE.

Diba Omnifit EZ Chromatography Column 5 x 50 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 5 x 50 mm, Operating Temperature: 4 to 40 degC, Total Volume: 0.4 mL

Diba Omnifit EZ SolventPlus Chromatography Column 35x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 35x400mm, Total volume capacity: 202.0-356.0ml

Diba Omnifit EZ SolventPlus Chromatography Column 35 x 330 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150 Psi, Dimension: 35 x 330 mm, Total volume capacity: 288.6ml

Diba Omnifit EZ SolventPlusChromatography Column 35x330mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 35x330mm, Total volume: 211.7-288.6ml

Diba Omnifit EZ SolventPlus Chromatography Column 35x330mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 35x330mm, Total volume capacity: 134.7-288.6ml

Diba Omnifit EZ SolventPlus Chromatography Column 25x250mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 25x250mm, Total volume: 68.7-108.0ml

Diba Omnifit EZ SolventPlus Chromatography Column 25x250mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 25x250mm, Total volume capacity: 29.5-108.0ml

Diba Omnifit EZ SolventPlus Chromatography Column 25 x 150 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150 Psi, Dimension: 25 x 150 mm, Total volume capacity: 58.9ml

Diba Omnifit EZ SolventPlus Chromatography Column 25x150mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 150psi, Dimension: 25x150mm, Total volume: 19.6-58.9ml

Diba Omnifit EZ SolventPlus Chromatography Column 25 x 100 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150 Psi, Dimension: 25 x 100 mm, Total volume capacity: 34.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 25x100mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150psi, Dimension: 25x100mm, Total volume: 1.2-34.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 25x100mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 150psi, Dimension: 25x100mm, Total volume capacity: 1.2-34.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 15 x 500 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 300 Psi, Dimension: 15 x 500 mm, Total volume capacity: 83.1ml

Diba Omnifit EZ SolventPlus Chromatography Column 15x500mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 300psi, Dimension: 15x500mm, Total volume: 68.9-83.1ml

Diba Omnifit EZ SolventPlus Chromatography Column 15x500mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 300psi, Dimension: 15x500mm, Total volume capacity: 54.8-83.1ml

Diba Omnifit EZ SolventPlus Chromatography Column 15 x 400 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 300 Psi, Dimension: 15 x 400 mm, Total volume capacity: 65.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 15x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 300psi, Dimension: 15x400mm, Total volume: 51.2-65.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 15x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 300psi, Dimension: 15x400mm, Total volume capacity: 37.1-65.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 15 x 330 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 300 Psi, Dimension: 15 x 330 mm, Total volume capacity: 53ml

Diba Omnifit EZ SolventPlus Chromatography Column 15x330mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 300psi, Dimension: 15x330mm, Total volume capacity: 24.7-53.0ml

Diba Omnifit EZ SolventPlus Chromatography Column 15x250mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 300psi, Dimension: 15x250mm, Total volume capacity: 10.6-38.9ml

Diba Omnifit EZ SolventPlus Chromatography Column 15 x 150 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 300 Psi, Dimension: 15 x 150 mm, Total volume capacity: 21.2ml

Diba Omnifit EZ SolventPlus Chromatography Column 15x150mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 300psi, Dimension: 15x150mm, Total volume: 7.1-21.2ml

Diba Omnifit EZ SolventPlus Chromatography Column 15x150mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 300psi, Dimension: 15x150mm, Total volume capacity: 0.4-21.2ml

Diba Omnifit EZ SolventPlus Chromatography Column 15 x 100 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 300 Psi, Dimension: 15 x 100 mm, Total volume capacity: 12.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 15x100mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 300psi, Dimension: 15x100mm, Total volume: 0.4-12.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 15x100mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 300psi, Dimension: 15x100mm, Total volume capacity: 0.4-12.4ml

Diba Omnifit EZ SolventPlus Chromatography Column 10 x 500 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 600 Psi, Dimension: 10 x 500 mm, Total volume capacity: 36.9ml

Diba Omnifit EZ SolventPlus Chromatography Column 10x500mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 600psi, Dimension: 10x500mm, Total volume: 30.6-36.9ml

Diba Omnifit EZ SolventPlus Chromatography Column 10x500mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 600psi, Dimension: 10x500mm, Total volume capacity: 24.3-36.9ml

Diba Omnifit EZ SolventPlus Chromatography Column 10 x 400 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 600 Psi, Dimension: 10 x 400 mm, Total volume capacity: 29.1ml

Diba Omnifit EZ SolventPlus Chromatography Column 10x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 600psi, Dimension: 10x400mm, Total volume: 22.8-29.1ml

Diba Omnifit EZ SolventPlus Chromatography Column 10x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 600psi, Dimension: 10x400mm, Total volume capacity: 16.5-29.1ml

Diba Omnifit EZ SolventPlus Chromatography Column 10 x 330 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 600 Psi, Dimension: 10 x 330 mm, Total volume capacity: 23.6ml

Diba Omnifit EZ SolventPlus Chromatography Column 10x330mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 600psi, Dimension: 10x330mm, Total volume: 17.3-23.6ml

Diba Omnifit EZ SolventPlus Chromatography Column 10x250mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 600psi, Dimension: 10x250mm, Total volume capacity: 4.7-17.3ml

Diba Omnifit EZ SolventPlus Chromatography Column 10 x 100 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 600 Psi, Dimension: 10 x 100 mm, Total volume capacity: 5.5ml

Diba Omnifit EZ SolventPlus Chromatography Column 10x100mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 600 Psi, Dimension: 10x100mm, Total volume: 0.2-5.5ml

Diba Omnifit EZ SolventPlus Chromatography Column 10x100mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 900 Psi, Dimension: 10x100mm, Total volume capacity: 0.2-5.5ml

Diba Omnifit EZ SolventPlus Chromatography Column 6.6 x 400 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 900 Psi, Dimension: 6.6 x 400 mm, Total volume capacity: 12.7ml

Diba Omnifit EZ SolventPlus Chromatography Column 6.6x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, Wetted Material: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 900psi, Dimension: 6.6x400mm, Total volume: 9.9-12.7ml

Diba Omnifit EZ SolventPlus Chromatography Column 6.6x400mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Adjustable Endpiece, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40C, Pressure: 900psi, Dimension: 6.6x400mm, Total volume capacity: 7.2-12.7ml

Diba Omnifit EZ SolventPlus Chromatography Column 6.6 x 330 mm. Diba Omnifit EZ SolventPlus Chromatography Column with 2 Fixed Endpieces, Wetted Materials: Borosilicate glass, PTFE, Chemraz, Operating Temperature: 4-40 C, Pressure: 900 Psi, Dimension: 6.6 x 330 mm, Total Volume Capacity: 10.3ml

Diba Omnifit EZ SolventPlus Chromatography Column 6.6x330mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 1 Fixed/1 Adjustable Endpieces, PEEK column thread, Material: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6x330mm, Operating Temperature: 4-40 degC, Total Volume: 7.5-10.3mL

Diba Omnifit EZ SolventPlus Chromatography Column 6.6 x 330mm. Diba Omnifit, EZ SolventPlus Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, Chemraz, Dimensions: 6.6x330mm, Operating Temperature: 4 to 40 degC, Total Volume: 4.8-10.3mL

Diba Omnifit EZ Chromatography Column 35 x 330 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 35 x 330 mm, Operating Temperature: 4 to 40 degC, Volume: 288.6 mL

Diba Omnifit EZ Chromatography Column 35x330mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150Psi, Dimensions: 35x330mm, Operating Temperature: 4-40 degC, Volume: 211.7 - 288.6mL

Diba Omnifit EZ Chromatography Column 35 x 330mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 35 x 330 mm, Operating Temperature: 4 to 40 degC, Volume: 134.7 to 288.6 mL

Diba Omnifit EZ Chromatography Column 35 x 250 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 35 x 250 mm, Operating Temperature: 4 to 40 degC, Volume: 211.7 mL

Diba Omnifit EZ Chromatography Column 35 x 150 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 35 x 150 mm, Operating Temperature: 4 to 40 degC, Volume: 115.5 mL

Diba Omnifit EZ Chromatography Column 25x500mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150Psi, Dimensions: 25x500mm, Operating Temperature: 4-40 degC, Volume: 191.4-230.7mL

Diba Omnifit EZ Chromatography Column 25 x 400 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 25 x 400 mm, Operating Temperature: 4 to 40 degC, Volume: 181.6 mL

Diba Omnifit EZ Chromatography Column 25x400mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150Psi, Dimensions: 25x400mm, Operating Temperature: 4-40 degC, Volume: 142.4-181.6mL

Diba Omnifit EZ Chromatography Column 25 x 330 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 25 x 330 mm, Operating Temperature: 4 to 40 degC, Volume: 147.3 mL

Diba Omnifit EZ Chromatography Column 25x330mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150Psi, Dimensions: 25x330mm, Operating Temperature: 4-40 degC, Volume: 108 to 147.3mL

Diba Omnifit EZ Chromatography Column 25 x 250 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 150 Psi, Dimensions: 25 x 250 mm, Operating Temperature: 4 to 40 degC, Volume: 108 mL

Diba Omnifit EZ Chromatography Column 10 x 500 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 600 Psi, Dimensions: 10 x 500 mm, Operating Temperature: 4 to 40 degC, Total Volume: 36.9 mL

Diba Omnifit EZ Chromatography Column 10x500mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 600Psi, Dimensions: 10x500mm, Operating Temperature: 4-40 degC, Volume: 30.6 to 36.9 mL

Diba Omnifit EZ Chromatography Column 10 x 500mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 600 Psi, Dimensions: 10 x 500 mm, Operating Temperature: 4 to 40 degC, Volume: 24.3 to 36.9 mL

Diba Omnifit EZ Chromatography Column 10 x 400 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 600 Psi, Dimensions: 10 x 400 mm, Operating Temperature: 4 to 40 degC, Total Volume: 29.1 mL

Diba Omnifit EZ Chromatography Column 10x330mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 600Psi, Dimensions: 10x330mm, Operating Temperature: 4-40 degC, Volume: 17.3 to 23.6 mL

Diba Omnifit EZ Chromatography Column 10 x 330mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 600 Psi, Dimensions: 10 x 330 mm, Operating Temperature: 4 to 40 degC, Volume: 11 to 23.6 mL

Diba Omnifit EZ Chromatography Column 10 x 250 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 600 Psi, Dimensions: 10 x 250 mm, Operating Temperature: 4 to 40 degC, Total Volume: 17.3 mL

Diba Omnifit EZ Chromatography Column 10x250mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 600Psi, Dimensions: 10x250mm, Operating Temperature: 4-40 degC, Volume: 11.0 to 17.3 mL

Diba Omnifit EZ Chromatography Column 10 x 100mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 600 Psi, Dimensions: 10 x 100 mm, Operating Temperature: 4 to 40 degC, Volume: 0.2 to 5.5 mL

Diba Omnifit EZ Chromatography Column 6.6 x 400 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 6.6 x 400 mm, Operating Temperature: 4 to 40 degC, Total Volume: 12.7 mL

Diba Omnifit EZ Chromatography Column 6.6x400mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column thread, Material: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200Psi, Dimensions: 6.6x400mm, Operating Temperature: 4-40 degC, Volume: 9.9 to 12.7 mL

Diba Omnifit EZ Chromatography Column 6.6 x 400mm. Diba Omnifit, EZ Chromatography Column, with 2 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200Psi, Dimensions: 6.6 x 400 mm, Operating Temperature: 4 to 40 degC, Volume: 7.2 to 12.7 mL

Diba Omnifit EZ Chromatography Column 6.6 x 330 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 6.6 x 330 mm, Operating Temperature: 4 to 40 degC, Total Volume: 10.3 mL

Diba Omnifit EZ Chromatography Column 6.6 x 250 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 6.6 x 250 mm, Operating Temperature: 4 to 40 degC, Total Volume: 07.5 mL

Diba Omnifit EZ Chromatography Column 6.6x250mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column thread, Material: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200Psi, Dimensions: 6.6x250mm, Operating Temperature: 4-40 degC, Volume: 4.8 to 7.5mL

Diba Omnifit EZ Chromatography Column 6.6 x 150 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 6.6 x 150 mm, Operating Temperature: 4 to 40 degC, Total Volume: 4.1 mL

Diba Omnifit EZ Chromatography Column 6.6 x 100 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 6.6 x 100 mm, Operating Temperature: 4 to 40 degC, Total Volume: 2.4 mL

Diba Omnifit EZ Chromatography Column 6.6 x 50 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 6.6 x 50 mm, Operating Temperature: 4 to 40 degC, Total Volume: 0.7 mL

Diba Omnifit EZ Chromatography Column 6.6x50mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column thread, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 6.6x50mm, Operating Temperature: 4-40 degC, Volume: 1.4 to 0.7 mL

Diba Omnifit EZ Chromatography Column 5 x 400 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 5 x 400 mm, Operating Temperature: 4 to 40 degC, Total Volume: 7.3 mL

Diba Omnifit EZ Chromatography Column 5 x 330 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 5 x 330 mm, Operating Temperature: 4 to 40 degC, Total Volume: 5.9 mL

Diba Omnifit EZ Chromatography Column 5x330mm. Diba Omnifit, EZ Chromatography Column, with 1 Fixed and 1 Adjustable Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200Psi, Dimensions: 5x330mm, Operating Temperature: 4 to 40 degC, Volume: 4.7 to 5.9 mL

Diba Omnifit EZ Chromatography Column 5 x 250 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 5 x 250 mm, Operating Temperature: 4 to 40 degC, Total Volume: 4.3 mL

Diba Omnifit EZ Chromatography Column 5 x 150 mm. Diba Omnifit, EZ Chromatography Column, with 2 Fixed Endpieces, PEEK column threads, Materials: Borosilicate glass, PTFE, PE, FKM/FPM, Pressure: 1200 Psi, Dimensions: 5 x 150 mm, Operating Temperature: 4 to 40 degC, Total Volume: 2.4 mL

Diba Omnifit EZ, Fixed Column Endpiece, Column Inside Diameter (ID): 50 mm.

Diba Omnifit EZ, Fixed Column Endpiece, Column Inside Diameter (ID): 35 mm.

Diba Omnifit EZ, Fixed Column Endpiece, Column Inside Diameter (ID): 25 mm.

Diba Omnifit EZ, Fixed Column Endpiece, Column Inside Diameter (ID): 10 mm.

Diba Omnifit EZ, Fixed Column Endpiece, Column Inside Diameter (ID): 6.6 mm.

Diba Omnifit EZ, Fixed Column Endpiece, Column Inside Diameter (ID): 5 mm.

Diba Omnifit EZ, Adjustable Column Endpiece, Column Inside Diameter (ID): 50 mm.

Diba Omnifit EZ, Adjustable Column Endpiece, Column Inside Diameter (ID): 35 mm.

Diba Omnifit EZ, Adjustable Column Endpiece, Column Inside Diameter (ID): 6.6 mm.

Diba Omnifit EZ Replacement Glass 5 x 400 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 5 x 400 mm

Diba Omnifit EZ Replacement Glass 5 x 330 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 5 x 330 mm

Diba Omnifit EZ Replacement Glass 5 x 150 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 5 x 150 mm

Diba Omnifit EZ Replacement Glass 5 x 100 mm. Diba Omnifit EZ Replacement Glass, Mix and match column length while using existing endpieces for ultimate flexibility, Dimensions: 5 x 100 mm

Diba Omnifit EZ Packing Sleeve, Used to join 2 Columns or Connect to Column Packer, ID: 50 mm.

Diba BenchMark Microbore Chromatography Column 3x25mm 0.2 mL. Diba BenchMark, Microbore Chromatography Column, with 2 Fixed Endpieces, Materials: Borosilicate glass, PCTFE, FKM/FPM, 316 SS, PTFE, Pressure: 1200 Psi, Dimensions: 3 x 25 mm, Operating Temperature: 4 to 20 degC, Total Volume: 0.2 mL

O-Ring. ,Silicone,Fits 200Mm Grooved Flange,Pk/5

Nut, Flangeless. For 1/16 inch OD tubing, 1/4-28 threads, PEEK

Valve, Micro-Splitter. Low Pressure, 1/4-28 Threads, Biocompatible, includes Flangeless Fittings for 1/16 OD Tubing

Tubing, Tefzel (ETFE). .063 inch ID x 1/ inch OD x 100 feet. Natural

Adapter. Quick Connect Male Luer to Internal/Female 1/4-28 Threads Tefzel (ETFE)

VWR Flask, Stainless Steel Dewar, Outer Diameter: 120mm, Height: 183mm, Capacity: 1000ml.

Thinlayer chromatography paper.

Power Supply Can Be Used In Conjunction With The Modular Valve Positioner. Mvp As Well As The Oem Syringe Drive Demo Cables For The Psd/2, Psd/3, Psd/4, And Psd/8. The Supply Provides A Constant Output Of 24 Vac With An Input Of 100-260 Vac.

VWR Zero Air Generator. Maximum purity of less than .05 ppm and a flow rate of 30 liters per minute and a pressure rating of 125 psig. 11X13X12. Weight 41 pounds.

Union, External/Male, 1/4-28 Threads. .062 inch (1.55mm) thru-hole, Kel-F (PCTFE)

Adapter. Female Slip luer to external/male 1/4-28, .05 inch (1.3mm) thru-hole, ETFE

Ferrule, Flangeless. For 1/8 inch OD tubing, Tefzel (ETFE), Natural (10 Pk)

TEES SS 1/8IN - SS-200-3

CHROMATOJAR SIDE PORT - 20-25

CHROMATOJAR SIDE PORT 75ML - 30-15

CHROMATOJAR SIDE PORT 25ML - 20-15

Accessories for TLC Developing Chamber, General Glass Blowing - 60-32, Tank for Latch-Lid ChromatoTank® Unit

Accessories for TLC Developing Chamber, General Glass Blowing - 60-34, Latch-Lid for Latch-Lid ChromatoTank® Unit

Thin Layer Chromatography (TLC) Developing Chambers, General Glass Blowing - 60-30, Latch-Lid ChromatoTank® Unit. Latch-lid ChromatoTank® unit

Thin Layer Chromatography (TLC) Developing Chambers, General Glass Blowing - 60-10, Standard Unit with Tank, Non-Slip Lid and Rack. Standard unit with tank, non-slip lid and rack

Thin Layer Chromatography (TLC) Developing Chambers, General Glass Blowing - 60-7, Standard Unit with Tank and Non-Slip Lid. Standard unit with tank and non-slip lid

Accessories for TLC Developing Chamber, General Glass Blowing - 60-2, Tank for Standard Units

Accessories for TLC Developing Chamber, General Glass Blowing - 60-4, Lid for Standard Units

Thin Layer Chromatography (TLC) Developing Chambers, General Glass Blowing - 60-3, Standard Unit with Tank and Lid. Standard unit with tank and lid

Accessories for TLC Developing Chamber, General Glass Blowing - 60-32TL, Tank for ChromatoTank® Unit

Accessories for TLC Developing Chamber, General Glass Blowing - 60-34TL, Latch-Lid for ChromatoTank® Unit

Accessories for TLC Developing Chamber, General Glass Blowing - 60-4TL, Lid for Thin Line Units

Accessories for TLC Developing Chamber, General Glass Blowing - 60-2TL, Tank for Thin Line Units

Latch-Lid ChromatoTanks®, General Glass Blowing - 80-30, Latch-Lid ChromatoTank® with Lid and Aluminum Rack

Diuron-d6 Standard, CAS Number:1007536-67-5, 100 ug/mL in acetonitrile, 1 mL/ampul.

Atrazine-d5 Standard, CAS Number:163165-75-1, 100 ug/mL in acetonitrile, 1 mL/ampul.

Category