• 0
Shop Products $

Accessories for Eppendorf® Microcentrifuges Model 5430, Eppendorf - 5427741003, Adapter for Tubes with 13 mm Diameter

Accessories for Eppendorf® Microcentrifuges Model 5430, Eppendorf - 5427740007, Adapter for Tubes with 13 mm Diameter

7830 POWER SUPPLY, Photochemical. 1200W UV POWER SUPPLY, INPUT 230v 50Hz.

7830 POWER SUPPLY, Photochemical. 1200W UV POWER SUPPLY, INPUT 230v 60Hz.

7830 POWER SUPPLY, Photochemical. 550W UV POWER SUPPLY, INPUT 120v 60Hz.

7830 POWER SUPPLY, Photochemical. 450W UV POWER SUPPLY, INPUT 240v 50Hz.

7830 POWER SUPPLY, Photochemical. 450W UV POWER SUPPLY, INPUT 120v 60Hz.

7830 POWER SUPPLY, Photochemical. 200W UV POWER SUPPLY, INPUT 120v 60Hz.

7830 POWER SUPPLY, Photochemical. 100W UV POWER SUPPLY, INPUT 120v 60Hz.

6445 RUPTURE DISC, Pressure, Graphite. 65 PSI 1.25 RUPTURE DISC GRAPHITE.

6445 RUPTURE DISC, Pressure, Graphite. 55 PSI 1.25 RUPTURE DISC GRAPHITE.

GE BBAR OPT WIND 50X3 - GE-50X3-BBAR3-12UM

GE BBAR OPT WIND 38X6 - GE-38X6-BBAR3-12UM

GE OPT WIND 25X4 - GE-25X4

GE OPT WIND 38X6 - GE-38X6

GE BBAR OPT WIND 25X4 - GE-25X4-BBAR3-12UM

GE OPT WIND 50X3 - GE-50X3

WATER QUALITY ASSESSMENT-LAB WATER UNIT - AS-H20-QUALITY

REPLACEMENT CARTRIDGE SERVICE - CART-SERVICE

Micro-Sample Test Kit, Includes 500 chamber cleaners, 500 sampler tips, 1 plunger wire, For use with Osmo1, 3320, and 3300 osmometers

Barcode Scanner assembly for use with Advanced Model 3250 Single-Sample Osmometer.

LONG ELECTRODE - 23AC

Non-Extracted Cotton Wicks. Accessory to Smoke Point Lamp (52938-040).

CHARGE STATION GO DIRECT FOR CARTS - GDX-CART-CRG

MIRROR PLEXIGLASS 2.5X3IN PK10 - 130123-10

Accessories for LabQuest® 3 - LQ3-STN, LabQuest® 3 Stand

Accessories for LabQuest® 3 - LQ3-PS, LabQuest® 3 Power supply

Accessories for LabQuest® 3 - LQ3-LAN, LabQuest® 3 Lanyard

Accessories for LabQuest® 3 - LQ3-CRG, LabQuest® 3 Charging station

Accessories for LabQuest® 3 - LQ3-BAT, LabQuest® 3 Replacement battery

MIRROR 2 X 6 PLANE - MSG6X2, Mirror, Plane, Glass, 6×2 IN.

LENS DOUBLE CONVEX 7.5 CM D 17.5 CM FL - LCC708, Double convex lens

Kit Reflex Hammer Accessory. The Reflex Hammer Accessory Kit converts your-Vernier force sensor-into a reflex hammer. Use it to capture the strike of the hammer on a tendon

Labquest Sd Card. LabQuest SD Card, Easily add 16 GB of storage to your LabQuest or move files between LabQuests or a computer

Clamp Go Direct Sensor. Go Direct Sensor Clamp, securely fastens to a wand-style Go Direct sensor, and the included lanyard works as a strap to prevent accidental drops during investigations in the field

Kit Centripetal Force Apparatus Motor. Centripetal Force Apparatus Motor Accessory, includes Motor, Bracket and attachment to base, Power supply with variable speed control, O-ring, controls the rotational rate of the Go Direct Centripetal Force Apparatus

Kit Go Direct Sensor Cart Accessory. Go Direct Sensor Cart Accessory Kit, includes springs, magnets, masses, and replacement parts for the Go Direct Sensor Cart makes multiple-collision experiments possible, Supporting impulse and momentum/energy conservation experiments

Friction Pad Dts Standard Cart. Friction Pad DTS to your Vernier, Standard Cart, Plunger Cart, or Motion Encoder Cart, and watch the carts move under very consistent friction force. Setting the friction amount is as simple as turning a knob

Cable Vernier Digital Breadboard Btd. One end of the cable is a standard British Telecom Digital (BTD) connector that plugs into a compatible-Vernier interfaces. The other end of the cable is a prototyping board connector that exposes the six sensor lines on a prototyping board

Charge Station Go Direct For Sensors. Go Direct Charge Station, perfect solution for charging your Go Direct Sensors. Each charge station has sixteen charging ports-eight USB and eight wand-style sensor ports. LED lights on the Go Direct sensors will show charging status

Strip Motion Encoder Long Track 2.2 M. Motion Encoder Long Track Strip, 2.2 m long label for application to a Combination 2.2 m Track/Optics Bench or Combination 1.2 m Track/Optics Bench. For use with the Combination 1.2 m Track/Optics Bench, need to cut the label to 1.1 m

Vernier Mass Dts, four 125 gram masses are used to add mass to a cart for dynamics experiments, Compatible only with plastic Vernier carts, For Dynamics Cart and Track System, Dynamics Cart and Track System with long track, Motion Encoder Cart, Plunger Cart, Standard Cart

1M Neulog B/M To B/M Cable(Aka Cbl 261).

Neulog Battery, Sense bot, Material: Lithium, Current: 2500mAh.

Spectrophotometer Optical Fiber, designed exclusively for emission spectrum experiments, Simply insert the unit into the cuvette holder, and point the tip of the 1 m optical fiber at a light source, wavelength range: 350 nm to 900 nm

Projectile Stop, has one job-to keep the projectiles from the Vernier Projectile Launcher from rolling out of sight, it is placed in the launch line, beyond the landing site, and the projectile will be caught

Tesla Coil 220/240V. Tesla Coil, Tabletop, 220/240V, 50/60Hz, hands-free. It teaches about transformer, electromagnetism, resonating electrical circuit, inductance, capacitance, power transmission. The set consists of two antenna plate, small neon lightbulb, mini discharge electrode and lamp socket.

Spectrum tube power Supply 220V AC. Spectrum tube Power Supply, Connecting sockets are fully shielded to prevent electric shock. The bottom socket is spring loaded so tubes can be changed easily. Operates on 220V. The cord is 8 inch. Overall dimensions: 14-1/2inch x 4-1/2inch x 3inch

Replacement Belt For Van De Graaff.

Cenco Van De Graaff.

Cable, allows a Go Motion or CBR 2 to connect to a calculator computer.

Radioactive Gamma sources set. The Radioactive Gamma sources set includes eight different gamma emitting isotopes covering the entire energy range from 32 to 1333 keV Contains: Ba-133, Cd-109, Co-57, Co-60, Cs-137, Mn-54. Na-22 and Cs/Zn, mixed source of Cs-137 and Zn-65 to identify unknown isotope

Radioactive Gamma sources set. The Radioactive Gamma sources set includes eight different gamma emitting isotopes covering the entire energy range from 32 to 1333 keV Contains: Ba-133, Cd-109, Co-57, Co-60, Cs-137, Mn-54. Na-22 and Cs/Zn, mixed source of Cs-137 and Zn-65 to identify unknown isotope

Needle source Sr-90 is a beta emitter containing 0.01 microcuries of Strontium-90.

Needle source Po-210 is an alpha emitter containing 0.01 microcuries of Polonium-210.

Set of 8 Gamma sources. Set of 8 gamma emitting isotopes covering the entire energy range from 32 to 1333 keV. Also includes a mixed source of Cs-137 and Zn-65 which students may use to identify an GCunknownGCY isotope. The set consists of Ba-133, Cd-109, Co-57, Co-60, Cs-137, Mn-54. Na-22 and Cs/Zn

Lead shield 1- 20. Lead shield container is suitable for higher activity gamma sources. Holds up to 20 discs of size 1in. Outside Dimensions: 3.6 x 2.25inches, Interior Dimensions: 2.65 X 1.25inches, Thickness: 0.5, painted exterior, colors may vary

Lead Shield 1-8. Lead Shield for 1-8 Multiple 1inch Disk Source Storage, Painted on all sides, an entire set of eight RSS8 sources will fit inside the LSD4

Lead Shield 1-2. Lead Shield for Single/Double 1in Disk Source Storage. Also useful for 1in diameter Laminated Disk Sources

Scintillation Detectors are complete assembly for gamma spectroscopy applications. The 38x38 mm NaI(Tl) crystal includes PMT and voltage divider. Probe is supplied with a 10-position sample stand, lead shield and cables for connecting directly to the spectrometer

Paper, coated for NeuLog Spirometer.

Friction Box.

Economy Switch, requires fahnestock clips for easy, quick connection.

Mirror, With Base, To explore light reflection & refraction properties of convex mirrors, law of reflection, image formation, the effects of surface curvature on reflection, spherical aberration, diameter of the mirror is 95mm approx.

Mirror, With Base, To explore light reflection & refraction properties of concave mirrors, law of reflection, image formation, the effects of surface curvature on reflection, spherical aberration, diameter of the mirror is 95mm approx.

Solenoid. Air core solenoid, coils wound on a plastic tube with approximately 575 turns of copper wire, can carry a current of 5A continuously or 10A intermittently.

Spoke Pulley, ideal for use with photogates sensors. 65 mm diameter with spokes. Pulley, mounted on free running ball bearings with minimum friction. Mounted on a removeable rod of 150 x 10mm diameter

Condenser Box, provides differentvalues of Electrolytic capacitors ranging from 1ufd to 4.7ufd, +/- 10% tolerance and, of 63 volts working voltage, Built on 8in x 5in Plastic Box

Transformer Accessory kit. Transformer Accessory Kit 1, Used to demonstrate that step down transformer can produce currents that, large enough to weld metals or boil water, Weight (lb): 1.6, Length (in):8.7, Width (in):5.5, Height (in):2.4

Ripple Tank. Advanced Ripple Tank with Projection Mirror, 21.1lbs, 24.4x15.4x9.4in, Includes: (1) Vibration Generator, (1) Wave monitor unit, (1) Projection screen, (1) Wave dippers, (1) Lever arm and support, (1) Ripple tank, (1) Projection mirror, (1) Set of footers with adjustment screws

Prism, with different angle 25 degree x 25 degree x 130 degree manufactured from Optical Borosilicate Crown glass having R.I. 1.510 App. Optically worked for use with Spectrometer, Equilateral, two facespolished 32 x 32 mm height.Double Extra Dense Flint R. Index 1.71-1.74

Prism, with different angle 25 x 25 x 130degree, Optical Borosilicate Crown glass having R.I. 1.510 App. Optically worked for use with Spectrometer, Equilateral, two facespolished 32 x 32 mm height.Double Extra Dense Flint R. Index 1.71-1.74, Weight (lb): 1.3, 6.3x6.3x3.9in

Prism, with different angle 25 degree x 25 degree x 130 degree manufactured from Optical Borosilicate Crown glass having R.I. 1.510 App. Optically worked for use with Spectrometer, Equilateral, two faces polished 32 x 32 mm height.Extra Dense Flint Glass Prism. R. Index 1.65

Prism, with different angle 25 degree x 25 degree x 130 degree,Optical Borosilicate Crown glass having R.I. 1.510 App. Optically worked for use with Spectrometer, Equilateral, two facespolished 32 x 32 mm height.Dense Flint Glass Prism. R. Index 1.62, Weight (lb): 4.4, 7.9x7.5x5.1in

Prism, R Index 1.51 - Designed for Spectrometer, Weight (lb): 0.1, Length (in):0.5, Width (in): 0.4, Height (in): 0.2, Borosilicate crown glass with a refractive index of 1.51

Lense, Double Concave, Made from clear Acrylic. One plane surface, frosted. 86mm long.

Semi Circular Block, Clear glass, all faces fully polished.Diameter: 100 x 18 mm thickness, Weight (lb): 2.6, Length (in):5.1, Width (in): 5.1, Height (in): 3.9

Semi Circular Block, Clear glass, all faces fully polished, Diameter: 90 x 18 mm thickness.

Glass Block. Semi Circular Prisma Glass Block ( 90mm x 16mm), 3.5in, Weight (lb): 0.4, Length (in):10.0, Width (in): 8.0, Height (in): 1.0, Clear glass, all faces, polished

Semi Circular Block, Clear acrylic, all faces fully polished, Diameter 90 x 26 mm thickness.

Semi Circular Block, Clear acrylic, all faces fully polished.Diameter 90 x 16 mm thickness, Weight (lb): 4.1, Length (in):9.4, Width (in): 7.5, Height (in): 2.8

Prism. Equilateral Refraction Prism, good quality Flint Glass, index of refraction plate, measuring 75mm long by 9mm thick

Prism. Equilateral Refraction Prism, good Quality acrylic, index of refraction plate, measuring 75mm long by 9mm thick

Rectangular Block, Index of refraction plate, made from acrylic, Size: 125 x 65 x 18 mm.

Rectangular Block, Index of refraction plate, made from acrylic, Size: 100 x 75 x 18 mm.

Rectangular Block - Glass, Made from imported optical glass with optically worked surfaces, All angles accurately worked with edges slightly bevelled and glass free from bubbles, Size: 125 x 65 x 18 mm

Rectangular Block - Glass, Made from imported optical glass with optically worked surfaces, All angles accurately worked with edges slightly bevelled and glass free from bubbles, Size 100 x 60 x 18 mm

Rectangular Block - Glass, Made from imported optical glass with optically worked surfaces, All angles accurately worked with edges slightly bevelled and glass free from bubbles, Size 75 x 50 x 18 mm

Rectangular Block - Glass, Made from imported optical glass with optically worked surfaces, All angles accurately worked with edges slightly bevelled and glass free from bubbles, Size 75 x 50 x 12 mm

Prism, Clear acrylic polished surfaces, 90 x 45 x 45 degree Length 38 mm, Right Angled, Hypotenuse 55mm, Weight (lb): 8.0, Length (in):11.0, Width (in): 4.7, Height (in): 7.5

Prism, Right Angled, Hypotenuse 35mm, Clear acrylic polished surfaces, 90 x 45 x 45 degree Length 25 mm, Weight (lb): 1.3, Length (in):8.3, Width (in): 5.9, Height (in): 3.1

Prism, Equilateral, Clear acrylic polished surfaces, 60 x 60 x 60 degree Length 50 mm, Face 50mm, Weight (lb): 3.4, Length (in):11.4, Width (in): 6.3, Height (in): 3.1

Prism Glass. Prisms Glass - Right Angled, Size: 50 mm Non-optically worked with polished faces, edges slightly bevelled.Nominal angles 90 x 45 x 45 degree

Prism Glass. Prisms Glass - Right Angled, Size: 35 mm Non-optically worked with polished faces, edges slightly bevelled.Nominal angles 90 x 45 x 45 degree

Prism Glass. Prisms Glass - Right Angled, Size: 25 mm Non-optically worked with polished faces, edges slightly bevelled.Nominal angles 90 x 45 x 45 degree

Mirrors Glass. Plane Mirrors Glass, Mounted, 75 x 25 mm, Silvered back with protective coating. Mounted on wooden block 20 mm thick

Truss. Simple Form Truss, with hooks on both sides, V-shaped clamp and stand. Supplied without masses and spring scale

USB charger, Five port, allows you to charge up to 5 devices at one time. Five foot power chord.

Lenzft s Law kit. Lenzft s Law Kit, includes: -Lenzft s law apparatus -Dynamometer -2 magnets, Length (in): 13.5, Width (in): 5.8, Height (in): 1.5, provides the necessary tools to discover concepts involving Faradyft s Law, magnetism, and eddy currents

PH Buffer Capsule for calibration of pH, contains four capsules for each of the 4, 7, and 10 pH buffers, making a total of 12 capsules. The set also includes a small bottle of universal indicator with mold inhibitor, Has to be added to 100 ml of distilled water

Adapter. Standard USB Adapter, allows to be connected to computer for data collection using Logger Pro or Logger Lite software, Connector 1: USB Mini Type A Receptacle, Connector 2: USB Standard Type A Plug, can also be used with the USB cable that comes with the CBR 2

Noseclip, plastic, foam-padded noseclips help increase the accuracy of spirometry results by eliminating the escape of air through the nostrils during testing

Mouthpiece, Disposable, For a more sterile environment, use the cardboard mouthpieces to help eliminate the spreading of contagious material between students

Spirometer, designed to make human respiratory measurements at rest and during moderate activity. Used to perform a variety of experiments related to air flow and lung volume. Removable flow head (22 mm ID/30 mm OD) makes it easy to clean and sterilize

Disposable Bacterial Filter, disposable microbacterial filter significantly reduces need to sterilize your spirometers flow head, 30 mm ID opening allows for an easy, air-tight fit to the flow head

Salinity Standard, 35 ppt used to calibrate Salinity Sensor, 500ml.

Syringe, Plastic, with Luer-Lock connector. Part of Pressure Sensor Accessories Kit, 20 mL.

Gas Pressure Sensor Replacement Parts kit, contains all accessories for performing chemistry and biology experiments using any of pressure sensors

PH Storage, used to replace spilled or contaminated solution, Bottle of 500ml.

BT Photogate Cable, Replacement cable for connecting a Photogate to an interface.

Adapter for Pasco Cart, allows attachment of Dual-Range Force Sensor.

Guard. Optical DO Probe Metal Guard, protects Probe cap when taking measurements in the field and helps weigh down probe when submerged

Melt Station, Weight: 1.0 kg, Capillary tubes: 1.4-1.8 mm outside diameter, 100 mm length, Capillary tube slots: 3, Viewing Lens: 27 mm diameter, Resolution: 0.10 C, Lighting of capillary slots: 3 white LEDs, Accuracy: +/- 0.31 + 0.0006T, where T is temperature in Celsius

Adapter allows to be connected to a computer for data collection using Logger Pro or Logger Lite software, It has an USB Mini-A receptacle that connects to EasyTemp or EasyLink and a standard-A plug that connects to computer

Digital Sensor Cable, Connects digital sensors to digital (DIG) port on an interface.

Volatile Liquid Molar Mass, helps characterize a substances property, Application: for studying concept of molar mass of volatile liquid.

Lanyard, works as a LabQuest neck strap to prevent accidental drops while doing field studies. It can also be attached to a calculator cradle and used with a LabPro or CBL 2

Adapter. AC Adapter, 6-volt, DC, tip-negative power supply for use with LabPro, CBL 2, Digital Control Unit, and Wireless Dynamics Sensor System

Hamilton Syringe, Replacement 1 uL Hamilton syringe for use with Mini GC Gas Chromatograph.

Cable. Digital Extension Cable, 1.5 m long, can be used with any sensor that connects to a digital channel. Port will be labeled DIG1 or DIG2. Each cable is 2 meters in length

Cable. Analog Extension Cable, 1.5 m long, can be used with any sensor that connects to an analog channel labeled CH1, CH2, CH3, or CH4. Each cable is 2 meters in length

Cuvette, Material: Plastic, (UV-VIS), semi-microscale, Volume: 1 -1.5 mL with 20 lids.

Cuvette Rack, Material: Plastic, for holding up to 10 cuvettes during experiments.

Starna Cells quartz cuvettes, 3.5 ml with two lids.

Cuvette Lid, for use with plastic VIS-NIR cuvettes or UV-VIS cuvettes.

Cuff. Blood Pressure Cuff, for students with arm circumferences greater than 27 cm to 39 cm, Size: Standard

Blood Pressure Cuff, for students with arm circumferences greater than 18 cm to 27 cm, Size: small.

Cuff. Blood Pressure Cuff, for students with arm circumferences greater than 39 cm and less than 50 cm, Size: Large

Bottle, with Lid, that ships with CO2 Gas, O2 Gas, and Ethanol Sensors.

Adapter, myDAQ, allows to connect sensors to National Instruments interface, Includes: two connectors for analog sensors and one connector for digital sensors, screw terminal and header pins provide access to myDAQ lines not used by connectors

Shield. Interface Shield provides a convenient way to make connections from microcontrollers to sensors. Shield plugs directly on top of and adds two BTA (analog) and two BTD (digital) sockets, be used with SparkFun RedBoard, also works with Intel Galileo

Stand. ProScope Stand, steadily holds ProScope in a wide variety of positions. Perfect for mounting ProScope dissection subject or to capture classroom images

Cable. Analog Breadboard Cable, provides an easy way for students to build their own sensor circuitry and input signal into a interface for data acquisition, six pins available: SIG1, 5V, ID, VRES, GND, and SIG2, with standard British Telecom Analog (BTA) connector

Air Track Adapter, Allows Dual-Range Force Sensor to be mounted on end of an air track for collision studies, Includes: two magnetic bumpers

Adujustable end stop, Attaches to end of Dynamics Track to prevent cart from leaving track.

Compatible board, USB-to-Serial Chip: FTDI FT232RL, Main Processor: ATmega328, Flash Memory: 32kB, Clock Speed: 16MHz, Operating Voltage: 5 volts, Analog Inputs: 6, Button: Reset, USB Connector: USB Mini-B cable (included), Dimensions: 2.7 x 2.1in

Cartesian Diver, Demonstrates the transmission of pressure by a liquid, the compressibility of gases and Archimedes Principle

Cartesian Diver Set, Demonstrates the transmission of pressure by a liquid, the compressibility of gases and Archimedes Principle. The set consists of a Cartesian diver, glass cylinder, a rubber diaphragm and instruction

Whiteboard Optics Set, 24in x 17.25in x 1in, Whiteboard - 5 lb, 9 oz.

Air Blower with Hose - 220V, Can be used in the Home, Barn, garage or work shop, This blower is specifically designed for laboratory use. It give constant pressure at low noise levels. Dimensions: Weight (lb)6.0xLength (in)14.0xWidth (in)8.5xHeight (in)8.5

80V / 18A 1.44Kw Progr. Dc Power Supply.

36V / 40A 1.44Kw Progr. Dc Power Supply.

1200W Multi-Range 80V/60A Dc Pwr Supply.

Vernier® Chemical Polarimeter - CELLS-POL, Sample Cells

Turbidity Bottles - TRB-BOT, Turbidity Bottles

Water Quality Bottles - WQ-BOT, Water Quality Bottles

VSMT Tackle kit. VSMT Tackle Kit, For use with Vernier Structures & Materials Tester, includes a 50 x 50 x 6 mm and a 50 x 80 x 6 mm aluminum load plate, chain, threaded rods, U-bolts, and other accessories, connecting threaded parts are 1/4inch diameter material and 20 threads per inch

Hand Grip. Heart Rate Hand Grips, conjunction with the Polar Transmitter Module, For use with Exercise Heart Rate Monitor

Air Track system. Linear Air Track with accessories, 2m length, lightweight yet durable and can be used without a support stand

Air Track system. Linear Air Track with accessories, 1.5m length, Ideal for classroom use, Includes: (1) Linear air track, (1) Accessory pack, 63.8x7.1x12.6 inches, 24.9 pounds

Air table. Precision air table, for studying With the elastic and inelastic collisions, linear and angular momentum, conservation of momentum, moment of inertia, centripetal force, simple and complex harmonic motion. Size 700x500 mm with adjustable feet

Transformer Accessory kit. Transformer Accessory Kit 2, Lenz s law transformer accessory kit, demonstrate the production of large magnetic fields and lenz s law damping on pendulums with and without slits

Rheostat - PH1155F, Covered Rheostat, 100 Ohm 1.75 A

Acrylic Refraction Cube - P30347, Acrylic Refraction Cube

Bare Nichrome Wire - PH1064B, Bare Nichrome wire

Bare Nichrome Wire - PH1064C, Bare Nichrome wire

Bare Nichrome Wire - PH1064D, Bare Nichrome wire

Ward's® Stackable Electrophoresis Power Supply - E0303-WAR, Ward’s Stackable Power Supply

Individual Glass Lenses - LCV315, Convex lens. Double convex lens

Individual Glass Lenses - LCV520, Convex lens. Double convex lens

Double Sided Mirrors - MSA8X11-F, Mirrors, large, 8.5x11 IN.

Glass Prism and Lens Set with Storage Case - OPSETG2, Glass Prism and Lens Set with Storage Case

Franck-Hertz Experiment Power Supply - 1012818, Franck-Hertz Experiment Power Supply

NeuLog Rechargeable Battery Module - BAT-200, NeuLog rechargeable battery module

Visual Scientifics Hooke's Law - PTHOKL, Visual Scientifics Hooke's Law. Visual scientifics Hooke's law

Lens Sets - PH0538C, Lens Set

Individual Glass Lenses - PH0534L-CV1, Convex lens. Double convex lens

Individual Glass Lenses - PH0534L-CV2, Convex lens. Double convex lens

Biology with Vernier Lab Book - PPK, Primary Productivity Kit

Dual Output Electrophoresis Power Supply, Dual Output Electrophoresis Power Supply

AC/DC power supply - EPR1329A, AC/DC power supply

End-Window GM Probes - GP35, End-Window GM Probes, 35 mm GM Tube and Stand

Regulated Low Voltage DC Power Supply - 1665, Regulated Low Voltage DC Power Supply

SWITCH MODE DC POWER SUPPLY - 1692

4 Output Power Supply - ESRQP1343, 4 Output Power supply

Vernier® Go!® Link - GO-LINK, Vernier Go! Link

pH Storage Bottles - BTL, pH Storage Bottles

D.O. POLISHING STRIPS - PS

D.O. PROBE MEMBRANE CAP - MEM

Plastic Cuvettes (Visible Range) - CUV, Plastic Cuvettes (Visible Range)

Laser Optical Disk Set - LODS01, Laser Optical Disk Set

Polarizing Film, 6inch Width x 6inch Length.

Spectrometer. Emissions Spectrometer optical fiber, Instantly collect emissions spectra from light bulbs, gas discharge tubes, or the sun, It connects directly to your computer gives precise measurements over a range of 350-900 nm, without an optical fibe

Rotary Motion Motor kit. Rotary Motion Motor Kit, ncludes a small electric motor with pulley, rubber band belt, motor clip, and mounting screw. The motor can be attached to the Rotary Motion Sensor, and be used as an analog tachometer, or generator

Motion Detector Clamp, screws into the back of the Motion Detector, and then can be clamped to a variety of objects such as table tops, ring stands

Rotational Motion Accessory kit. Rotational Motion Accessory Kit, Use to study the motion of a physical pendulum; the rotational inertia of disks, rings, and point masses; and the conservation angular momentum, inlude hollow aluminum rod, Ultra Pulley

Link USB sensor interface. GoLink USB sensor interface is a quick and affordable way to get started with data-collection technology, single-channel interface that connects most sensors to your Windows or Macintosh computers USB port.

Laser. Green Diffraction Laser, optional accessory for the Diffraction Apparatus, Operating at 532 nm, it allows students to see and measure how diffraction patterns depend on light wavelength

Gas chromatography Septa, pack4.

Electrode support, It is built to connect to all standard ring-stand posts; its large-handled locking nut keeps your sensors firmly in place, great complement to the Stir Station, as well as a perfect holder for many sensors

Economy Spherical Mirror Set - MCVSET, Economy spherical mirror set

Spherical Mirrors - MCV310, Convex mirror

Spherical Mirrors - MCV306, Convex mirror

Spherical Mirrors - MCV304, Convex mirror

Spherical Mirrors - MCC310, Concave mirror

Spherical Mirrors - MCC306, Concave mirror

Spherical Mirrors - MCC304, Concave mirror

Equilateral Prisms - PH0554E, Equilateral Prisms, Glass, 25 x 75 mm

Equilateral Prisms - PH0554D, Equilateral Prisms, Glass, 25 x 50 mm

Individual Glass Lenses - PH0536L-CC, Concave lens. Double concave lens

Individual Glass Lenses - PH0536H-CC, Concave lens. Double concave lens

Individual Glass Lenses - LCV540, Convex lens. Double convex lens

Individual Glass Lenses - PH0534L-CV, Convex lens. Double convex lens

Individual Glass Lenses - PH0534K-CV, Convex lens. Double convex lens

Individual Glass Lenses - LCV505, Convex lens. Double convex lens

Individual Glass Lenses - PH0534H-CV, Convex lens. Double convex lens

Individual Glass Lenses - PH0534G-CV, Convex lens. Double convex lens

Equilateral Prisms - PH0554B, Equilateral Prisms, Acrylic, 50 x 20 mm

Equilateral Prisms - PH0554A, Equilateral Prisms, Acrylic, 25 x 12 mm

Clear Cylindrical Lenses for Ray Optics - CP85668-00, Double Convex

Blocks and Refraction Plates - PH0566D, Blocks and Refraction Plates, Clear Glass Block, 114 x 63 x 19mm

Air-Cooled Laboratory Rheostat - PH1149F, Rheostat, 4.5 OHMS

Air-Cooled Laboratory Rheostat - PH1151E, Rheostat, 20 OHMS

Acrylic Double Concave/Convex Lens - PACV86, Lens, Double Convex

45° and 60° Prism - PATRAP, Prism, 45 & 60 Degree

Mirror,Acrylic,4x4inch,plane.

Concave/Convex Mirrors - SB28627M, Concave/convex mirrors

Individual Glass Lenses - PH0534J-CV, Convex lens

Unmounted Mirrors - MCV502, Convex mirror

Unmounted Mirrors - MCC502, Concave mirror

Individual Glass Lenses - 4-90936, Convex lens. Double convex lens

Individual Glass Lenses - PH0536C-CC, Concave lens. Double concave lens

Individual Glass Lenses - PH0536B-CC, Concave lens. Double concave lens

Economy Light Source for Optical Bench - OBLS01, Light Source, Economy, for Optical Bench

Speed Gun - 101911, Speed Gun

Vernier® Blood Pressure Sensor - BPS-BTA, Vernier Blood Pressure Sensor

Individual Glass Lenses - LCV304, Convex lens. Double convex lens

Bar and Gauge - PH0378A, Bar and Gauge

Vernier® BlueView Transilluminator - BLUE-VIEW, Vernier BlueView Transilluminator

Vernier® Cart Picket Fence - PF-CART, Vernier Cart Picket Fance

Dynamics System - T2T-VDS, Track Coupler

Vernier® Ultra Pulley Attachment - B-SPA, Pulley Bracket

Vernier® Water Depth Sampler - WDS, Water Depth Sampler

Vernier® BioChamber - BC-250, Vernier BioChamber 250

Vernier® BioChamber - BC-2000, Vernier BioChamber 2000

Vernier® Power Amplifier Accessory Speaker - PAAS-PAMP, Power Amplifier Accessory Speaker

Essential Physics Demo: Large Demonstration Lenses - LN-5SPL, Large Lenses, Set of 6 Lenses

Essential Physics Demo: Large Demonstration Lenses - LNX125-150, Large Lenses, Convex Lens, Glass

Essential Physics Demo: Large Demonstration Lenses - LNX125-100, Large Lenses, Convex Lens, Glass

Essential Physics Demo: Large Demonstration Lenses - LNX125-50, Large Lenses, Convex Lens, Glass

LENS DBLE CONCAVE 125MM D 1500MM FL - LS125-150

Essential Physics Demo: Large Demonstration Lenses - LS125-100, Large Lenses, Concave Lens, Glass

Essential Physics Demo: Large Demonstration Lenses - LS125-50, Large Lenses, Concave Lens, Glass

Individual Glass Lenses - PH0534A-CV, Convex lens. Double convex lens

Fundamentals of Physics Electric Tuning Fork. Fundamentals of Physics Electric Tuning Fork - FN-TFRK, Fundamentals of Physics Electric Tuning Fork

Individual Glass Lenses - PH0534I-CV, Convex lens

Spherical Mirrors - MCC703, Concave mirror

Individual Glass Lenses - PH0536D-CC, Concave lens. Double concave lens

Individual Glass Lenses - PH0536A-CC, Concave lens. Double concave lens

Lampboard - LMPB03, 3- Lamp Lamp board

Spherical Mirrors - MCC302, Concave mirror

Individual Glass Lenses - PH0534B-CV, Convex lens. Double convex lens

Individual Glass Lenses - PH0534F-CV, Convex lens. Double convex lens

Individual Glass Lenses - PH0534D-CV, Convex lens. Double convex lens

Individual Glass Lenses - PH0534C-CV, Convex lens. Double convex lens

Lens Sets - PH0538B/CB, Lens Set

Individual Glass Lenses - 3309-08, Concave lens. Double concave lens

Spherical Mirrors - PH0526E, Convex mirror

Spherical Mirrors - PH0526D, Convex mirror

Spherical Mirrors - PH0526C, Convex mirror

Spherical Mirrors - PH0520F, Concave mirror

Spherical Mirrors - PH0520E, Concave mirror

Spherical Mirrors - PH0520D, Concave mirror

Spherical Mirrors - PH0520C, Concave mirror

Acrylic Double Concave/Convex Lens - PACC86, Lens, Double Concave

Clear Cylindrical Lenses for Ray Optics - SCL075, Semi Circular Lens, 75 mm Base, 15 mm Thick

Bag of Lenses - LBAG20, Bag of Lenses

Balls for Physics Experiments - ALBL25, Aluminum Ball, Drilled, 25 mm

Glass Cylindrical Mirrors - MRCV02, Convex/cylindrical mirror

Glass Cylindrical Mirrors - MRCC01, Concave/cylindrical mirror

Individual Glass Lenses - PH0536I-CC, Concave lens

Individual Glass Lenses - PH0536J-CC, Concave lens

SUPPORT LENS / MIRROR 7.5 CM D - 6008

SUPPORT LENS / MIRROR 3.5-4 CM D - 6006

MIRROR LARGE CONCAVE SPHERICAL - 4-1301-4, Large spherical concave mirror

MIRROR LARGE CONVEX SPHERICAL - 4-1301-3, Large spherical convex mirror

Convex/Concave Mirrors - 4-1301N, Convex/concave mirrors, glass

LASER POINTER HOLDER MAGNETICCHALKBOARD - 6581701

Unmounted Mirrors - MCV703, Convex mirror

Spherical Mirrors - MCV302, Convex mirror

Individual Glass Lenses - LCC708, Concave lens. Double concave lens

Equilateral Acrylic Prisms - PAE025, Prism, Equilateral/Acrylic, 25 mm x 25 mm

BeeSpi Timer - N99-S77-1321, BeeSpi Timer

Rheostat - PH1155J, Covered Rheostat, 1000 Ohm 0.5 A

Vernier® Picket Fence - PF, Vernier Picket Fence

Vernier® Ultra Pulley Attachment - SPA, Ultra Pulley Attachment

SURGE + NOISE FILTER 6-OUTLET - DG115-SI

Holding Fixture. Required for tightening cap of high-temperature acid digestion bomb (25227-094).

Hydrogenation Apparatus, 500 mL. With standard motor, 115V 60Hz. Base plate: 21-1/2 x 15 in. Overall height: 14 in. Provide compact & easily operated systems for treating chemicals with hydrogen in presence of a catalyst at pressures up to 5 atmospheres (60 psig) & temperatures to 80C.

Benzoic Acid. For standardizing all oxygen bomb calorimeters. 1.0g pellets.

Benzoic Acid. For standardizing all oxygen bomb calorimeters. 1.0g pellets.

Calorimeter Ignition Unit. 230V, 50/60Hz ignition unit for use with Plain Jacket Oxygen Bomb Calorimeter (19420-035) and Double Valve Oxygen Bomb (19422-051).

Calorimeter Ignition Unit. 115V, 50/60Hz ignition unit for use with Plain Jacket Oxygen Bomb Calorimeter (19420-034) and Double Valve Oxygen Bomb (19422-051).

HEAD SUPPORT PLATFORM - A38A

Oxygen Filling Connection. For use with Double Valve Oxygen Bomb 19422-051).

OXYGEN 60HZ 115V - 1901EB

PTFE Cup with Cover. 125mL. Replacement cup and cover for General-Purpose Acid Digestion Bomb (19420-164).

OUTLET TUBE PHEN/FLUOR - EMD1920-025

OUTLET TUBE AMMONIA - EMD1920-024

RECEIVER TUBE A/P/F STYLE - EMD1920-023

REACTION TUBE A/P/F STYLE - EMD1920-021

ABSORP/IMPING FLK CYN STY 2 - EMD1920-013

REAC/ABSORP FLKCYN STYLE 2 - EMD1920-012

ABSORP/IMPING FLK CYN STY 1 - EMD1920-003

REAC/ABSORP FLKCYN STYLE 1 - EMD1920-002

COLD FINGER FOR STY1+2+A/P/F - EMD1920-001

VACUUM TUBING 5FT LINE - EMD0200-456

WATER TUBING LINE - EMD0200-455

UNIVERSAL CYN/A/P/F ASSY LINES - EMD0200-459

A/P/F STYLE ONE GLASSWARE ASSY - EMD1920-02X

CYN STYLE 2 ONE GLASSWARE ASSY - EMD1920-01X

CYN STYLE 1 ONE GLASSWARE ASSY - EMD1920-00X

Infrared Adapter. Accessory for use with the Densito portable specific gravity/density meter (11278-062) or Refracto refractometer (62410-374). Transfers stored measurements to a printer or PC.

Cleaning Tissues. For use with the Densito portable specific gravity/density meter (11278-062), Refracto 30PX portable refractometer (11276-898), or Refracto 30GS portable refractometer (11276-900).

Pail, Material: Stainless Steel, For Density Scale.

Bucket, Material: Plastic, For Density Scale.

Category