• 0
Shop Products $

DPD Chlorine Reagent Powder Pop Dispenser, HF Scientific - 10448A, 2×200 tests, DPD Dispenser for Total Chlorine

Avantor Single Use 3D Tank Liners with Bottom Drain, Avantor Fluid Handling - 1003017, 560 L (147.9 gal.), Liner3D with port: Fits a tank with 79 cm Ø and a height of 124 cm

Avantor Single Use 3D Tank Liners with Bottom Drain, Avantor Fluid Handling - 1003015, 200 L (52.8 gal.), Liner3D with port: Fits a tank with 56 cm Ø and a height of 91 cm

Avantor Single Use 3D Tank Liners with Bottom Drain, Avantor Fluid Handling - 1003014, 100 L (26.4 gal.), Liner3D with port: Fits a tank with 46 cm Ø and a height of 67 cm

CurTec Wide Neck Drum 26l. CurTec Wide Neck Drum, Material: HDPE, Color: White, With Red Polypropylene Unlined Cap/Lids, Neck Finish: 203mm, Dimension: 316 x 425mm, Size: 26 Liters

CurTec Wide Neck Drum 20l. CurTec Wide Neck Drum, Material: HDPE, Color: White, With Red Polypropylene Unlined Cap/Lids, Neck Finish: 203mm, Dimension: 274 x 417mm, Size: 20 Liters

CurTec Wide Neck Drum 15l. CurTec Wide Neck Drum, Material: HDPE, Color: White, With Red Polypropylene Unlined Cap/Lids, Neck Finish: 203mm, Dimension: 274 x 327mm, Size: 15 Liters

CurTec Wide Neck Drum 10l. CurTec Wide Neck Drum, Material: HDPE, Color: White, With Red Polypropylene Unlined Cap/Lids, Neck Finish: 203mm, Dimension: 274 x 238mm, Size: 10 Liters

CurTec Wide Neck Drum 6l. CurTec Wide Neck Drum, Material: HDPE, Color: White, With Red Polypropylene Unlined Cap/Lids, Neck Finish: 136mm, Dimension: 198 x 263mm, Size: 6 Liters

CurTec Wide Neck Drum 3.6l. CurTec Wide Neck Drum, Material: HDPE, Color: White, With Red Polypropylene Unlined Cap/Lids, Neck Finish: 137mm, Dimension: 165 x 198mm, Size: 3.6 Liters

Rectangular Tank, Polypropylene. With stepped rim for strength and overlapping skirted cover. Molded in one piece and is autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. Volume: 38 L. 46Lx30Wx30Dcm.

TANK, PE, RECTANGULAR, WITH LID, 15GALLON. Seamless,rotational-molded polyethylene tanks are lightweight and easy to handle.

NALGENE Closed-Dome Bio Tank Closure with Mixer Support Assembly. For use with Closed-Dome Bio Tanks. Consists of a 185mm polypropylene screw closure with a 5cm sanitary fitting ferrule welded in the center, a 5cm silicone gasket, and a true iron fitting. Autoclavable.

NALGENE Closed-Dome Bio Tank, Polypropylene. Accepts Closed-Dome Bio Tank Closures with Mixer Support Assembly. Noncytotoxic, complies with FDA regulations, leakproof, repeatedly autoclavable. Volume: 75L. Size: 419ODx813Hmm. Nonsterile.

NALGENE Closed-Dome Bio Tank, Polypropylene. Accepts Closed-Dome Bio Tank Closures with Mixer Support Assembly. Noncytotoxic, complies with FDA regulations, leakproof, repeatedly autoclavable. Volume: 210L. Size: 559ODx1099Hmm. Nonsterile.

NALGENE Closed-Dome Bio Tank, Polypropylene. Accepts Closed-Dome Bio Tank Closures with Mixer Support Assembly. Noncytotoxic, complies with FDA regulations, leakproof, repeatedly autoclavable. Volume: 115L. Size: 470ODx981Hmm. Nonsterile.

Cylindrical Tank with Spigot, Heavy-Duty, LLDPE. Heavy wall construction. Equipped with polypropylene needle spigot, stepped flange at rim, and overlapping skirted cover. Graduated. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. Volume: 208L. ODxDepth: 55x91cm.

Cylindrical Tank with Spigot, Heavy-Duty, LLDPE. Heavy wall construction. Equipped with polypropylene needle spigot, stepped flange at rim, and overlapping skirted cover. Graduated. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. Volume: 113.6L. ODxDepth: 46x76cm.

Cylindrical Tank with Spigot, Heavy-Duty, LLDPE. Heavy wall construction. Equipped with polypropylene needle spigot, stepped flange at rim, and overlapping skirted cover. Graduated. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. Volume: 56.8L. ODxDepth: 33x69cm.

Cylindrical Tank with Spigot, Heavy-Duty, LLDPE. Heavy wall construction. With polypropylene needle spigot, stepped flange at rim, overlapping skirted cover. Graduated (no liters). Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. Volume: 37.9L. ODxDepth: 33x51cm.

Cylindrical Tank with Spigot, Heavy-Duty, LLDPE. Heavy wall construction. With polypropylene needle spigot, stepped flange at rim, overlapping skirted cover. Graduated (no liters). Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. Volume: 28.4L. ODxDepth: 30x46cm.

Cylindrical Tank with Spigot, Heavy-Duty, LLDPE. Heavy wall construction. Equipped with polypropylene needle spigot, stepped flange at rim, and overlapping skirted cover. Graduated. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. Volume: 19L. ODxDepth: 28x38cm.

Cylindrical Tank With Cover, LLDPE, nonsterile. Rigid tanks with hard surface and good temperature resistance. Comply with regulation 177.1520 for food use. Floating covers (Cat. No. 54104) are available for these tanks, up to 55 gallons. Mixers available for 30- to 500-gal. sizes.

Rectangular Tank With Cover, Low-Density Polyethylene, nonsterile. Overlapping flange for extra strength, easier handling.

Cylindrical Tank With Cover, LLDPE, nonsterile. Rigid tanks with hard surface and good temperature resistance. Comply with regulation 177.1520 for food use. Floating covers (Cat. No. 54104) are available for these tanks, up to 55 gallons. Mixers available for 30- to 500-gal. sizes.

Cylindrical Tank With Cover, LLDPE, nonsterile. Rigid tanks with hard surface and good temperature resistance. Comply with regulation 177.1520 for food use. Floating covers (Cat. No. 54104) are available for these tanks, up to 55 gallons. Mixers available for 30- to 500-gal. sizes.

Cylindrical Tank With Cover, LLDPE, nonsterile. Rigid tanks with hard surface and good temperature resistance. Comply with regulation 177.1520 for food use. Floating covers (Cat. No. 54104) are available for these tanks, up to 55 gallons. Mixers available for 30- to 500-gal. sizes.

Cylindrical Tank With Cover, LLDPE, nonsterile. Rigid tanks with hard surface and good temperature resistance. Comply with regulation 177.1520 for food use. Floating covers (Cat. No. 54104) are available for these tanks, up to 55 gallons. Mixers available for 30- to 500-gal. sizes.

Cylindrical Tank With Cover, LLDPE, nonsterile. Rigid tanks with hard surface and good temperature resistance. Comply with regulation 177.1520 for food use. Floating covers (Cat. No. 54104) are available for these tanks, up to 55 gallons. Mixers available for 30- to 500-gal. sizes.

Cylindrical Tank With Cover, LLDPE, nonsterile. Rigid tanks with hard surface and good temperature resistance. Comply with regulation 177.1520 for food use. Floating covers (Cat. No. 54104) are available for these tanks, up to 55 gallons. Mixers available for 30- to 500-gal. sizes.

Rectangular Tank With Cover, Low-Density Polyethylene, nonsterile. Overlapping flange for extra strength, easier handling.

Rectangular Tank, Polypropylene. With stepped rim for strength and overlapping skirted cover. Molded in one piece and is autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. Volume: 50 L. 61Lx30Wx30Dcm.

Rectangular Tank, Polypropylene. With stepped rim for strength and overlapping skirted cover. Molded in one piece and is autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. Volume: 20 L. 25Lx25Wx36Dcm.

Rectangular Tank With Cover, PP, non sterile. Autoclavable polypropylene tanks offer good stress-crack resistance, good tolerance to many organic chemicals and are less expensive than comparable stainless steel tanks. Useful for disinfecting biological waste. Resin also complies with CFR 177.1520.

Rectangular Tank, Polypropylene. With stepped rim for strength and overlapping skirted cover. Molded in one piece and is autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. Volume: 30 L. 30Lx30Wx30Dcm.

Rectangular Tank,Low-Density Polyethylene. 160L. With stepped rim for strength and overlapping skirted cover. Molded in one piece with good chemical resistance. 61Lx45Wx60Dcm.

Rectangular Tank, Low-Density Polyethylene. 120L. With stepped rim for strength and overlapping skirted cover. Molded in one piece with good chemical resistance. 61Lx45Wx45Dcm.

Rectangular Tank, Low-Density Polyethylene. 60L. With stepped rim for strength and overlapping skirted cover. Molded in one piece with good chemical resistance. 45Lx30Wx45Dcm.

Rectangular Tank, Low-Density Polyethylene. 38L. With stepped rim for strength and overlapping skirted cover. Molded in one piece with good chemical resistance. 46Lx30Wx30Dcm.

Rectangular Tank, Low-Density Polyethylene. 20L. With stepped rim for strength and overlapping skirted cover. Molded in one piece with good chemical resistance. 25Lx25Wx36Dcm.

Rectangular Tank, Low-Density Polyethylene. 30L. With stepped rim for strength and overlapping skirted cover. Molded in one piece with good chemical resistance. 30Lx30Wx30Dcm.

Cylindrical Tank With Cover, LLDPE. Cylindrical Tank With Cover

Cylindrical Tank With Cover, LLDPE, nonsterile. Rigid tanks with hard surfaces and good temperature tolerance. Not autoclavable. Comply with regulation 177.1520 for food use. 15 gallon (57L) with 1 gallon (4L) graduations. O.D. x D: 13IN x 27IN.

Cylindrical Tank With Cover, LLDPE, nonsterile. Rigid tanks with hard surface and good temperature resistance. Comply with regulation 177.1520 for food use. Floating covers (Cat. No. 54104) are available for these tanks, up to 55 gallons. Mixers available for 30- to 500-gal. sizes.

Cylindrical Tank With Cover, PP, non sterile. Autoclavable polypropylene tanks offer good stress-crack resistance, good tolerance to many organic chemicals and are less expensive than comparable stainless steel tanks. Useful for disinfecting biological waste. Resin also complies with Reg. 177.1520.

Cylindrical Tank With Cover, PP, non sterile. Autoclavable polypropylene tanks offer good stress-crack resistance, good tolerance to many organic chemicals and are less expensive than comparable stainless steel tanks. Useful for disinfecting biological waste. Resin also complies with Reg. 177.1520.

Cylindrical Tank With Cover, PP, non sterile. Autoclavable polypropylene tanks offer good stress-crack resistance, good tolerance to many organic chemicals and are less expensive than comparable stainless steel tanks. Useful for disinfecting biological waste. Resin also complies with Reg. 177.

Cylindrical Tank With Cover, PP, non sterile. Autoclavable polypropylene tanks offer good stress-crack resistance, good tolerance to many organic chemicals and are less expensive than comparable stainless steel tanks. Useful for disinfecting biological waste. Resin also complies with Reg. 177.1520.

Cylindrical Tank With Cover, PP, non sterile. Autoclavable polypropylene tanks offer good stress-crack resistance, good tolerance to many organic chemicals and are less expensive than comparable stainless steel tanks. Useful for disinfecting biological waste. Resin also complies with Reg. 177.1520.

Cylindrical Tank With Cover, PP, non sterile. Autoclavable polypropylene tanks offer good stress-crack resistance, good tolerance to many organic chemicals and are less expensive than comparable stainless steel tanks. Useful for disinfecting biological waste. Resin also complies with Reg. 177.1520.

Cylindrical Tank With Cover, PP, non sterile. Autoclavable polypropylene tanks offer good stress-crack resistance, good tolerance to many organic chemicals and are less expensive than comparable stainless steel tanks. Useful for disinfecting biological waste. Resin also complies with Reg. 177.1520.

Cylindrical Tank with Spigot, LLDPE, Lightweight. 208L. With polypropylene needle spigot, stepped flange at rim, overlapping skirted cover. Graduated in liters and gallons. Good chemical resistance. Not autoclavable. Plastic meets USP VI, FDA 21 CFR 177.1520. ODxDepth: 56x91cm.

Cylindrical Tank with Spigot, LLDPE, Lightweight. 113.6L. With polypropylene needle spigot, stepped flange at rim, overlapping skirted cover. Graduated in liters and gallons. Good chemical resistance. Not autoclavable. Plastic meets USP VI, FDA 21 CFR 177.1520. ODxDepth: 46x76cm.

Cylindrical Tank with Spigot, LLDPE, Lightweight. 56.8L. With polypropylene needle spigot, stepped flange at rim, overlapping skirted cover. Graduated in liters and gallons. Good chemical resistance. Not autoclavable. Plastic meets USP VI, FDA 21 CFR 177.1520. ODxDepth: 33x69cm.

Cylindrical Tank with Spigot, LLDPE, Lightweight. 37.9L. With polypropylene needle spigot, stepped flange at rim, overlapping skirted cover. Graduated in gallons. Good chemical resistance. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. ODxDepth: 33x51cm.

Cylindrical Tank with Spigot, LLDPE, Lightweight. 28.4L. With polypropylene needle spigot, stepped flange at rim, overlapping skirted cover. Graduated in gallons. Good chemical resistance. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. ODxDepth: 30x46cm.

Cylindrical Tank with Spigot, LLDPE, Lightweight. 19L. With polypropylene needle spigot, stepped flange at rim, overlapping skirted cover. Graduated in liters and gallons. Good chemical resistance. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. ODxDepth: 28x38cm.

Cylindrical Tank, LLDPE, Lightweight. 208L. External flange and overlapping skirted full-width cover. Graduated in liters and gallons. Good chemical resistance. Tolerant of temperature ranges. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. O.D.xDepth: 56x91cm.

Cylindrical Tank, LLDPE, Lightweight. 113.6L. External flange and overlapping skirted full-width cover. Graduated in liters and gallons. Good chemical resistance. Tolerant of temperature ranges. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. O.D.xDepth: 46x76cm.

Cylindrical Tank, LLDPE, Lightweight. 56.8L. External flange and overlapping skirted full-width cover. Graduated in liters and gallons. Good chemical resistance. Tolerant of temperature ranges. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. O.D.xDepth: 33x69cm.

Cylindrical Tank, LLDPE, Lightweight. 37.9L. External flange and overlapping skirted full-width cover. Graduated in gallons only. Good chemical resistance. Tolerant of temperature ranges. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. O.D.xDepth: 33x51cm.

Cylindrical Tank, LLDPE, Lightweight. 28.4L. External flange and overlapping skirted full-width cover. Graduated in gallons only. Good chemical resistance. Tolerant of temperature ranges. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. O.D.xDepth: 30x46cm.

Cylindrical Tank, LLDPE, Lightweight. 19L. External flange and overlapping skirted full-width cover. Graduated in liters and gallons. Good chemical resistance. Tolerant of temperature ranges. Not autoclavable. Plastic meets USP VI and FDA 21 CFR 177.1520. O.D.xDepth: 28x38cm.

Heavy-Duty Rectangular Tank. Size: 75.7L. With top flanges. Seamless, rotational-molded polyethylene tank With lid and faucet. Resistant to most acids and all alkalies. Includes cover.

Rectangular Tanks with Top Flanges. Heavy duty seamless polyethylene tanks are impervious to most acids and alkalis. Cover included. Wide top flanges for strength. Capacity: 57 liters (15 gal). Dimensions: 39cm x 30cm x 48cm (15.25 x 12 x 19). Wall: 6.44mm (1/4).

Heavy-Duty Rectangular Tank. Size: 37.8L. With top flanges. Seamless, rotational-molded polyethylene tank With lid and faucet. Resistant to most acids and all alkalies. Includes cover.

Rectangular Tanks with Top Flanges. Heavy duty seamless polyethylene tanks are impervious to most acids and alkalis. Cover included. Wide top flanges for strength. Capacity: 28 liters (7.5 gal). Dimensions: 42cm x 28cm x 25cm (16.5 x 11 x 10). Wall: 6.4mm (1/4).

Rectangular Tanks with Top Flanges. Heavy duty seamless polyethylene tanks are impervious to most acids and alkalis. Cover included. Wide top flanges for strength. Capacity: 19 liters (5 gal). Dimensions: 28cm x 28cm x 25cm (11x11x10). Wall: 6.4mm (1/4).

Rectangular Tanks with Top Flanges. Heavy duty seamless polyethylene tanks are impervious to most acids and alkalis. Cover included. Wide top flanges for strength. Capacity: 78 liters (20 gal). Dimensions: 53cm x 41cm x 36cm (21x 16 x 14). Wall: 6.44mm (1/4).

Rectangular Tanks with Top Flanges. Heavy duty seamless polyethylene tanks are impervious to most acids and alkalis. Cover included. Wide top flanges for strength. Capacity: 39 liters (10 gal). Dimensions: 46cm x 33cm x 25cm (18 x 13 x 10). Wall: 6.4mm (1/4).

Cylindrical Tank, Flat-Bottom, PVDF, Saint-Gobain Performance Plastics - 11500-0015, Cylindrical Tank, Flat Bottom, PVDF

TANK, PE, RECTANGULAR, WITH LID, 5GALLON. Seamless,rotational-molded polyethylene tanks are lightweight and easy to handle.

Category