• 0
Shop Products $

TUBING PHARMED 1/8X1/4IN 25FT

TUBING PHARMA-80 1/2 X 3/4 50FT - 4008433

ADAPTR 3/4IN CLAMP 1/4IN ID

Valves Straight Low Hold Up without Tip O-Ring PTFE Plug HI-VAC. Bore Range (mm); 0-4. Approx. Stem O.D. (mm); 9. O-Ring Size; 010 Sidearms are bent to minimize liquid holdup that would occur in conventional valves. PTFE shaft seals protect the Viton o-rings from contact with the system.

Clamps Pinch. Size; 28. Screw Lock Provided; Yes. Fits O-Ring Conn. Size; 12-15 Used to assemble component parts of [standard joint] spherical and o-ring connector arms. The size corresponds to the ball diameter, the first figure in designating the size of a [standard joint] joint.

Gasket, Sanitary, 2Inch, Ptfe/Elastomer Core, Each.

Gasket, Sanitary, 1Inch, Ptfe/Elastomer Core, Each.

Gasket, Sanitary, 3/4Inch, Ptfe/Elastomer Core, Each.

Clamp, Sanitary, 2Inch, Heavy Duty, Single Pin, 304 S.S., Each.

Clamp, Sanitary, 1Inch, Heavy Duty, Single Pin, 304 S.S., Each.

Clamp, Sanitary, 3/4Inch, Heavy Duty, Single Pin, 304 S.S., Each.

Support Rings, Extension, Iron, Humboldt - H-18420, 76.2 mm

Support Rings, Cast Iron, Humboldt Manufacturing - H-18331, 76.2 mm

SUPPORT RING - H-21700

Support Rings, Wire, Humboldt - H-18355, 5 IN.

Support Rings, Wire, Humboldt - H-18345, 4 IN.

Support Rings, Wire, Humboldt - H-18335, 3 IN.

Support Rings, Wire, Humboldt - H-18325, 2 IN.

TONGS RIVETD-JOINT NI-PLATE9IN - H-23050

Support Rings, Cast Iron, Humboldt Manufacturing - H-18360, 152.4 mm

VWR 3/4In Sanitary Spigot Fitting. Allows for the utmost secure clamped connection for the carboy fluid transfer system.

VWR Hose Barbed Spigot Fitting. Fits a 3/4in hose attachment for a completely closed fluid transfer system.

VWR Hose Barbed Spigot Fitting. Fits a 1/2in hose attachment for a completely closed fluid transfer system.

VWR Hose Barbed Spigot Fitting. Fits a 3/8in hose attachment for a completely closed fluid transfer system.

VWR Hose Barbed Spigot Fitting. Fits a 1/4in hose attachment for a completely closed fluid transfer system.

VWR Closed Spigot Fitting. Is is a cap for the spigot opening and is useful when transporting or storing the carboy when a spigot is not being used.

VWR Carboy T Spigot. Is made from polypropylene and is autoclavable. it has a large, comfortable lever that controls two flow rates including a continuous flow. the spout is designed to fit two hose sizes (5/8in and 3/4in). pack of 2.

PLUG ONLY 0-4MM TEFLON TIP - CGK-561-01

PLUG ONLY0-4MM EXPSD ORING TIP - CGK-535-01

LABJAWS ROD-END LAB FRAME CONNECTOR, 90 DEGREES.

LABJAWS ROD END-TO-END CONNECTOR.

7MM SOLID PTFE PLUG, 7855-805 CAPFE O-RING FRONT SEAL.

7MM SOLID PTFE PLUG, 7855-712 FETFE O-RING BACK SEAL.

7MM SOLID NYLON PLUG, 7855-712 FETFE O-RING BACK SEAL.

SIZE -317 CAPFE O-RING.

15MM ACE-THRED PTFE BUSHING, -110 CHEMRAZ O-RING, ACCEPTS 12.5-14MM OD TUBING.

12780 Nipple. 1/4-28 CPTFE MALE NIPPLE.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 1/2 MALE NPT TO 1/2 MALE NPT STRAIGHT CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 3/8 MALE NPT TO 3/8 MALE NPT STRAIGHT CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 1/4 MALE NPT TO 1/4 MALE NPT STRAIGHT CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 3/8 MALE NPT TO 3/8 ID HOSE BARB CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 1/4 MALE NPT TO 1/4 ID HOSE BARB CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 1/2 MALE NPT TO 1/2 OD TUBE COMPRESSION ELBOW CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 1/2 MALE NPT TO 1/2 OD TUBE COMPRESSION STRAIGHT CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 3/8 MALE NPT TO 1/2 OD TUBE COMPRESSION STRAIGHT CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 3/8 MALE NPT TO 3/8 OD TUBE COMPRESSION STRAIGHT CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 3/8 MALE NPT TO 1/4 OD TUBE COMPRESSION STRAIGHT CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 1/4 MALE NPT TO 3/8 OD TUBE COMPRESSION STRAIGHT CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 1/4 MALE NPT TO 1/4 OD TUBE COMPRESSION STRAIGHT CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 3/8 MALE NPT TO 1/2 OD TUBE COMPRESSION ELBOW CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 3/8 MALE NPT TO 3/4 OD TUBE COMPRESSION ELBOW CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 1/4 MALE NPT TO 3/8 OD TUBE COMPRESSION ELBOW CONNECTOR.

12770 TUBE FITTINGS, CONNECTORS, PTFE. PTFE 1/4 MALE NPT TO 1/4 OD TUBE COMPRESSION ELBOW CONNECTOR.

12741 Omnifit connector bodies. 6.35X1/6 1/4 HP ADAPTER.

12741 Omnifit connector bodies. TEFZEL ADAPTER VB W/VALVE.

12741 Omnifit connector bodies. SMALL VB HP ADPTR.

12741 Omnifit connector bodies. HP ADAPTER FEMALE.

12740 Cap adapters for Variable-bore Omnifit fittings.. ADAPTER FEMALE LUER FIT.

12740 Cap adapters for Variable-bore Omnifit fittings.. ADAPTER MALE LUER FIT.

12732 VALVE, Tubing Connector, Eight-Way - Omnifit. 8-WAY VALVE TEFZEL OMNIFIT.

12730 VALVE, Tubing Connector, Three-Way - Omnifit. 3-WAY TEFZEL VALVE OMNIFIT.

12724 CONNECTOR, GRIPPER FITTING, SEALING PLUG - Omnifit. PK2 PLUG SEAL OMNIFIT.

12724 CONNECTOR, GRIPPER FITTING, SEALING PLUG - Omnifit. PK10 TEFZEL COUPLING OMNIFIT.

12724 CONNECTOR, GRIPPER FITTING, SEALING PLUG - Omnifit. PK10 POLYPROP COUPLING OMNIFIT.

12724 CONNECTOR, GRIPPER FITTING, SEALING PLUG - Omnifit. PK10 1/8 CONNECTOR OIMNIFIT.

12724 CONNECTOR, GRIPPER FITTING, SEALING PLUG - Omnifit. PK10 1/16 CONNECTOR OMNIFIT.

12724 CONNECTOR, GRIPPER FITTING, SEALING PLUG - Omnifit. END FITTING FOR CONNECTION.

12723 UNIVERSAL CONNECTOR, Tubing Variable-Bore - Omnifit. PK2 CONNECTOR UNIVERSAL.

12714 OMNIFIT TUBING CONNECTOR, Variable Bore. PK3 2-WAY TUBING CONN.

12713 Glass-filled polypropylene insert.. 9.5MM INSERT.

12713 Glass-filled polypropylene insert.. 6.4MM INSERT.

12712 Glass-filled polypropylene bulkhead union tube to tube.. 12.7MM UNION BULKHEAD.

12712 Glass-filled polypropylene bulkhead union tube to tube.. 6.4MM UNION BULKHEAD.

12708 Glass-filled polypropylene elbow tube to MPT.. 12.7-12.7MM ELBOW.

12708 Glass-filled polypropylene elbow tube to MPT.. 12.7-9.5MM ELBOW.

12708 Glass-filled polypropylene elbow tube to MPT.. 9.5-6.4MM ELBOW.

12708 Glass-filled polypropylene elbow tube to MPT.. 6.4-6.4MM ELBOW.

12708 Glass-filled polypropylene elbow tube to MPT.. 6.4-3.2MM ELBOW.

12707 Glass-filled polypropylene connector tube to MPT.. 15.9-12.7MM CONNECTOR.

12707 Glass-filled polypropylene connector tube to MPT.. 12.7-12.7MM CONNECTOR.

12707 Glass-filled polypropylene connector tube to MPT.. 12.7-9.5MM CONNECTOR.

12707 Glass-filled polypropylene connector tube to MPT.. 9.5-9.5MM CONNECTOR.

12707 Glass-filled polypropylene connector tube to MPT.. 9.5-6.4MM CONNECTOR.

12707 Glass-filled polypropylene connector tube to MPT.. 6.4-6.4MM CONNECTOR.

12707 Glass-filled polypropylene connector tube to MPT.. 6.4-3.2MM CONNECTOR.

12706 Glass-filled polypropylene female coupling tube to FPT.. 12.7-9.5MM COUPLING.

12706 Glass-filled polypropylene female coupling tube to FPT.. 9.5-9.5MM COUPLING.

12706 Glass-filled polypropylene female coupling tube to FPT.. 9.5-6.4MM COUPLING.

12706 Glass-filled polypropylene female coupling tube to FPT.. 6.4-3.2MM COUPLING.

12705 Glass-filled polypropylene elbow tube to tube.. 12.7MM ELBOW.

12705 Glass-filled polypropylene elbow tube to tube.. 9.5MM ELBOW.

12705 Glass-filled polypropylene elbow tube to tube.. 6.4MM ELBOW.

12699 Glass-filled polypropylene tee tube to tube to tube.. 12.7MM TEE TUBE.

12699 Glass-filled polypropylene tee tube to tube to tube.. 9.45MM TEE TUBE.

12699 Glass-filled polypropylene tee tube to tube to tube.. 6.4MM TEE TUBE.

12693 glass-filled polypropylene union tube to tube. 12.7MM TO 12.7MM GLASS-FILLED POLYPROPYLENE TUBING UNION.

12693 glass-filled polypropylene union tube to tube. 9.5MM TO 9.5MM GLASS-FILLED POLYPROPYLENE TUBING UNION.

12693 glass-filled polypropylene union tube to tube. 9.5MM TO 6.4MM GLASS-FILLED POLYPROPYLENE TUBING UNION.

12693 glass-filled polypropylene union tube to tube. 6.4MM TO 3.2MM GLASS-FILLED POLYPROPYLENE TUBING UNION.

12692 Glass-filled polypropylene tube connector nuts. 9.5MM NUT.

12692 Glass-filled polypropylene tube connector nuts. 6.4MM NUT.

8486 TUBE, Connecting, 90 degree. 3\8 TUBE CONNECTING.

8486 TUBE, Connecting, 90 degree. 5\16 TUBE CONNECTING.

8486 TUBE, Connecting, 90 degree. 1\4 TUBE CONNECTING.

8486 TUBE, Connecting, 90 degree. 3\16 TUBE CONNECTING.

8481 TUBE, Connecting. 1\2 X 3\8 TUBE.

8481 TUBE, Connecting. 1\2 X 1\4 TUBE.

8481 TUBE, Connecting. 9.5 TO 6.4MM CONNECTION TUBE.

8472 HOSE CONNECTIONS, Mini-Lab Size. HOSE CONNECTION FOR 5/16 ID TUBING, 25MM OVERALL LENGTH, FLARE END.

8472 HOSE CONNECTIONS, Mini-Lab Size. HOSE CONNECTION FOR 5/16 ID TUBING, 100MM OVERALL LENGTH, STRAIGHT END.

8472 HOSE CONNECTIONS, Mini-Lab Size. HOSE CONNECTION FOR 5/16ID TUBING, 25MM OVERALL LENGTH, STRAIGHT END.

8471 Hose connections, large. HOSE CONNECTION FOR 1/2 ID TUBING, 41MM OVERALL LENGTH, FLARE END.

8471 Hose connections, large. HOSE CONNECTION FOR 3/8 ID TUBING, 32MM OVERALL LENGTH, FLARE END.

8470 HOSE CONNECTIONS, Regular. HOSE CONNECTION FOR 5/16 ID TUBING, 29MM OVERALL LENGTH, FLARE END.

8470 HOSE CONNECTIONS, Regular. HOSE CONNECTION FOR 5/16 ID TUBING, 76MM OVERALL LENGTH, STRAIGHT END.

8470 HOSE CONNECTIONS, Regular. HOSE CONNECTION FOR 5/16 ID TUBING, 25MM OVERALL LENGTH, STRAIGHT END.

8469 HOSE CONNECTIONS, Direct Seal. 1/2 ID TUBING HOSE CONNECTION ON 7.5MM OD TUBE WITH 13.5MM SECOND RING.

8469 HOSE CONNECTIONS, Direct Seal. 3/8ID TUBING HOSE CONNECTION ON 5MM OD TUBE WITH 11MM OD SECOND RING.

8469 HOSE CONNECTIONS, Direct Seal. 3/8 ID TUBING HOSE CONNECTION ON 4MM OD TUBE WITH 10MM SECOND RING.

8469 HOSE CONNECTIONS, Direct Seal. 5/16 ID TUBING HOSE CONNECTION ON 3MM OD TUBE WITH 8MM OD SECOND RING.

7649 JOINTS, O-Ring Seal, Spherical Ball. 35/25 O-RING SEAL JOINT.

7649 JOINTS, O-Ring Seal, Spherical Ball. 28/15 O-RING SEAL JOINT.

7649 JOINTS, O-Ring Seal, Spherical Ball. 18/9 O-RING SEAL JOINT.

7649 JOINTS, O-Ring Seal, Spherical Ball. 12/5 O-RING SEAL JOINT.

7648 JOINTS, O-Ring Seal. 29/42 O-RING JOINT O-RING SEAL -118.

7648 JOINTS, O-Ring Seal. 24/40 JOINTS O-RING SEAL -115.

7648 JOINTS, O-Ring Seal. 19/38 JOINTS O-RING SEAL -111.

7648 JOINTS, O-Ring Seal. 19/22 O-RING JOINT -111 FETFE O-RING.

7648 JOINTS, O-Ring Seal. 14/35 JOINTS O-RING SEAL -012.

7648 JOINTS, O-Ring Seal. 14/20 O-RING JOINT.

7648 JOINTS, O-Ring Seal. 12/30 JOINTS O-RING SEAL -011.

7646 JOINTS, O-Ring Seal. 75MM JOINTS O-RING SEAL -341.

7646 JOINTS, O-Ring Seal. 50MM JOINTS O-RING SEAL -229.

7646 JOINTS, O-Ring Seal. 40MM JOINTS O-RING SEAL -226.

7646 JOINTS, O-Ring Seal. 20MM JOINTS O-RING SEAL -214.

7646 JOINTS, O-Ring Seal. 7MM JOINT O-RING SEAL -111.

7646 JOINTS, O-Ring Seal. 5MM JOINTS O-RING SEAL -110.

7644 CONNECTORS, Threaded, Ace-Thred. THREAD 36MM SST.

7644 CONNECTORS, Threaded, Ace-Thred. THREAD 25MM SST.

7644 CONNECTORS, Threaded, Ace-Thred. THREAD 15MM SST.

7644 CONNECTORS, Threaded, Ace-Thred. THREAD 11MM SST.

7644 CONNECTORS, Threaded, Ace-Thred. THREAD 7MM SST.

7644 CONNECTORS, Threaded, Ace-Thred. 80MM THREADED CONNECTION.

7644 CONNECTORS, Threaded, Ace-Thred. 50MM THREADED CONNECTION.

7644 CONNECTORS, Threaded, Ace-Thred. 15MM THREADED CONNECTION.

7640 JOINTS, Extended Drip Tip. 34/45 INNER JOINT W/REDUCED END.

7640 JOINTS, Extended Drip Tip. 29/42 INNER JOINT W/REDUCED ENDS.

7640 JOINTS, Extended Drip Tip. 24/40 INNER JOINT W/REDUCED ENDS.

7640 JOINTS, Extended Drip Tip. 19/38 INNER JOINT W/REDUCED END.

7640 JOINTS, Extended Drip Tip. 14/35 INNER JOINT W/REDUCED ENDS.

7640 JOINTS, Extended Drip Tip. 10/30 INNER JOINT W/REDUCED ENDS.

7636 JOINTS, Drip Tip. 24/40 INNER JOINT W/DRIP TIP.

7635 JOINTS, Inner Member. 24/40 INNER JOINTS W/REDUCED ENDS.

7635 JOINTS, Inner Member. 14/20 INNER JOINTS W/REDUCED ENDS.

7630 JOINTS, Inner Member. 24/40 INNER JOINT W/REDUCED ENDS.

7630 JOINTS, Inner Member. 14/35 INNER JOINT W/REDUCED ENDS.

7630 JOINTS, Inner Member. 10/30 INNER JOINT W/REDUCED ENDS.

7623 HOSE CONNECTION, for GL Thread, with RUBBER SEAL. 8MMOD 4MMID BENT SCHOTT HOSE CONNECTION USED WITH GL 18 CAP.

7623 HOSE CONNECTION, for GL Thread, with RUBBER SEAL. 8MMOD 4MMID BENT SCHOTT HOSE CONNECTION USED WITH GL 14 CAP.

7620 CONNECTORS, Screwthread, GL. GL 120 100MM GLASS CONNECTOR, 120MM OD 5MM WALL.

7620 CONNECTORS, Screwthread, GL. GL 45 100MM GLASS CONNECTOR, 40MM OD 2.3MM WALL.

7620 CONNECTORS, Screwthread, GL. GL 32 100MM GLASS CONNECTOR, 28MM OD 2MM WALL.

7620 CONNECTORS, Screwthread, GL. GL 25 100MM GLASS CONNECTOR, 22MM OD 1.8MM WALL.

7620 CONNECTORS, Screwthread, GL. GL 18 100MM GLASS CONNECTOR, 16MM OD 1.8MM WALL.

7620 CONNECTORS, Screwthread, GL. GL 14 100MM GLASS CONNECTOR, 12MM OD 1.5MM WALL.

7618 LOOSENING RING, Polyamide - Rodaviss. 29/42 LOOSENING RING RODAVISS JOINTS.

7618 LOOSENING RING, Polyamide - Rodaviss. 24/40 LOOSENING RING RODAVISS JOINTS.

7618 LOOSENING RING, Polyamide - Rodaviss. 19/22 LOOSENING RING RODAVISS JOINTS.

7618 LOOSENING RING, Polyamide - Rodaviss. 14/20 LOOSENING RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 45/50 VITON O-RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 34/45 VITON O-RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 29/42 VITON O-RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 24/40 VITON O-RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 19/22 VITON O-RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 14/20 VITON O-RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 45/50 NITRILE O-RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 34/45 NITRILE O-RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 24/40 NITRILE O-RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 19/22 NITRILE O-RING RODAVISS JOINTS.

7617 O-RING - Rodaviss. 14/20 NITRILE O-RING RODAVISS JOINTS.

7506 BUSHING, Ace-Thred connector. 80MM ACE-THRED PTFE BUSHING, -336 FETFE O-RING, ACCEPTS 80MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 50MM ACE-THRED PTFE BUSHING, -225 FETFE O-RING, ACCEPTS 47-48MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 36MM ACE-THRED PTFE BUSHING, -217 FETFE O-RING, ACCEPTS 34-35MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 25MM ACE-THRED PTFE BUSHING, -212 FETFE O-RING, ACCEPTS 24-25MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 18MM ACE-THRED PTFE BUSHING, -112 FETFE O-RING, ACCEPTS 16-17MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 15MM ACE-THRED PTFE BUSHING, -110 FETFE O-RING, ACCEPTS 12.5-14MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 11MM ACE-THRED PTFE BUSHING, -012 FETFE O-RING, ACCEPTS 9-10.5MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 80MM ACE-THRED UHMWP BUSHING, -336 FETFE O-RING, ACCEPTS 80MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 50MM ACE-THRED NYLON BUSHING, -225 SILICONE O-RING, ACCEPTS 47-48MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 50MM ACE-THRED NYLON BUSHING, -225 FETFE O-RING, ACCEPTS 47-48MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 36MM ACE-THRED NYLON BUSHING, -217 FETFE O-RING, ACCEPTS 34-35MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 25MM ACE-THRED NYLON BUSHING, NO O-RING, ACCEPTS 24-25MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 18MM ACE-THRED NYLON BUSHING, -112 FETFE O-RING, ACCEPTS 16-17MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 15MM ACE-THRED NYLON BUSHING, -110 FETFE O-RING, ACCEPTS 12.5-14MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 15MM ACE-THRED NYLON BUSHING, NO O-RING, ACCEPTS 12.5-14MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 11MM ACE-THRED NYLON BUSHING, -108 FETFE O-RING, ACCEPTS 9-10.5MM OD TUBING.

7506 BUSHING, Ace-Thred connector. 11MM ACE-THRED NYLON BUSHING, NO O-RING, ACCEPTS 9-10.5MM OD TUBING.

5854 CONNECTORS, Tubing OPTI-LOK LP. 1/4-28 FEMALE TO 1/4-28 FEMALE PEEK UNION.

5854 CONNECTORS, Tubing OPTI-LOK LP. TUBING CONNECTION FERRULE ONLY 3.3MM 1/8.

5854 CONNECTORS, Tubing OPTI-LOK LP. TUBING CONNECTION FERRULE ONLY 1.5MM 1/16.

5854 CONNECTORS, Tubing OPTI-LOK LP. TUBING CONNECTION NUT ONLY 3.3M 1/8.

5854 CONNECTORS, Tubing OPTI-LOK LP. TUBING CONNECTION NUT ONLY 1.5M (1/16).

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. #25 ACE-THRED TO 1 ACE-SAFE TUBING CONNECTOR.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. #25 ACE-THRED TO 3/4ID ACE-SAFE TUBING CONNECTOR.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. ACE-SAFE HOSE CONNECTOR ONLY, #25-1ID TUBING.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. ACE-SAFE HOSE CONNECTOR ONLY, #25-3/4ID TUBING.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. #15 ACE-THRED TO 1/2ID ACE-SAFE TUBING CONNECTOR.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. #15 ACE-THRED TO 3/8ID ACE-SAFE TUBING CONNECTOR.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. ACE-SAFE HOSE CONNECTOR ONLY, #15-1/2ID TUBING.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. #15 ACE-THRED TO 1/4ID ACE-SAFE TUBING CONNECTOR.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. ACE-SAFE HOSE CONNECTOR ONLY, #15-3/8ID TUBING.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. ACE-SAFE HOSE CONNECTOR ONLY, #15-1/4ID TUBING.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. #11 ACE-THRED TO 3/8ID ACE-SAFE TUBING CONNECTOR.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. #11 ACE-THRED TO 1/4ID ACE-SAFE TUBING CONNECTOR.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. ACE-SAFE HOSE CONNECTOR ONLY, #11-3/8ID TUBING.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. ACE-SAFE HOSE CONNECTOR ONLY, #11-1/4ID TUBING.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. ACE-SAFE HOSE CONNECTOR ONLY, #15-1/2ID TUBING, NO O-RING NEEDED.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. #7 ACE-THRED TO 1/4ID ACE-SAFE TUBING CONNECTOR.

5853 CONNECTOR, Ace-Safe, Tubing, PTFE. ACE-SAFE HOSE CONNECTOR ONLY, #11 TO 1/4ID TUBING.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 80MM SOLID PTFE PLUG, 7855-766 FETFE O-RING BACK SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 50MM SOLID PTFE PLUG, 7855-748 FETFE O-RING BACK SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 18MM SOLID PTFE PLUG, 7855-721 FETFE O-RING FRONT SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 15MM SOLID PTFE PLUG, 7855-716 FETFE O-RING FRONT SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 80MM SOLID UHMWP PLUG, 7855-764 FETFE O-RING FRONT SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 50MM SOLID NYLON PLUG, 7855-744 FETFE O-RING FRONT SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 36MM SOLID NYLON PLUG, 7855-772 FETFE O-RING FRONT SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 25MM SOLID NYLON PLUG, 7855-742 FETFE O-RING BACK SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 18MM SOLID NYLON PLUG, 7855-734 FETFE O-RING BACK SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 15MM SOLID NYLON PLUG, 7855-730 FETFE O-RING BACK SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 11MM SOLID NYLON PLUG, 7855-708 FETFE O-RING FRONT SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 80MM SOLID PTFE PLUG, 7855-764 FETFE O-RING FRONT SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 50MM SOLID PTFE PLUG, 7855-744 FETFE O-RING FRONT SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 18MM SOLID PTFE PLUG, 7855-734 FETFE O-RING BACK SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 11MM SOLID PTFE PLUG, 7855-722 FETFE O-RING BACK SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 80MM SOLID UHMWP PLUG, 7855-766 FETFE O-RING BACK SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 50MM SOLID NYLON PLUG, 7855-748 FETFE O-RING BACK SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 36MM SOLID NYLON PLUG, 7855-774 FETFE O-RING BACK SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 25MM SOLID NYLON PLUG, 7855-734 FETFE O-RING FRONT SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 18MM SOLID NYLON PLUG, 7855-721 FETFE O-RING FRONT SEAL.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 15MM SOLID NYLON PLUG, 7855-716 FETFE O-RING FRONT SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 11MM SOLID NYLON PLUG, 7855-722 FETFE O-RING BACK SEAL.

O-RING VITON #017 PK12 - CG-305-017

Drain Valve. Small Zero Dead Space Drain Valve Complete, Standard, 3/4 inch Beaded Pipe Side Arm

Drain Valve. Glass body only, 1 1/2 inch beaded pipe drain valve

PTFE Plug. 3/4 inch Male NPT, for use with ChemGlass Reaction Vessel Lids

Viton O-Ring #109. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #108. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #107. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #104. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Replacement Glass Plug. 0-4mm, Viton O-Ring. Replacement glass plug and control knob for CG-973 through CG-982 high vacuum valves. Plug is sold complete with control knob and glass stem having three o-rings.

Chem-Vac Valve. Hi-Vac, 1-Arm, 0-4mm Bore, Viton O-Ring. Eliminates the outgassing problems associated with TFE valves. Valve has a sidearm sealed at a 90- angle to the barrel. Class plug with three o-rings, the tip o-ring making the primary seal on the precision formed tapered seat.

Valve, Chem-Vac. Hi-Vac, 180 deg, 0-4mm Bore, Viton O-Ring. Eliminates outgassing problems associated with TFE valves. Two sidearms are sealed to the barrel at a 90- angle to one another. Valve has a glass plug with three o-rings.

Valve, Chem-Vac. Hi-Vac, 0-4mm Bore, Viton O-Ring. Eliminates outgassing problems associated with TFE valves. Two sidearms are sealed to the barrel at a 90- angle to one another. Valve has a glass plug with three o-rings.

Control Knob, Fine Thread. For CG-590-01

20mm Control Knob Only. For CG-511-02

12mm Control Knob Only. For CG-511-01

12mm Black Acetal Control Knob Only. For CG-510-02

6mm Black Acetal Control Knob Only. For CG-510-01

Thermocouple Connection Replacement Screw Thread. GL 25 Screw Thread for Thermocouple Bushing

Thermocouple Connection, Stainless Steel. Gauge connection consists of a GL 25 thread, a stainless steel bushing and an open top GL 25 screw cap. The thermocouple gauge tube is threaded into the #303 stainless steel bushing and inserted into the glass GL 25 thread.

Viton O-Ring #5-101. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #359. Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200- C

Viton O-Ring #349. Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200- C

Viton O-Ring #348. Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200- C

Viton O-Ring #341. Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200- C

Viton O-Ring #339. Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200- C

Viton O-Ring #338. Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200- C

Viton O-Ring #331. Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200- C

Viton O-Ring #317. Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200- C

Viton O-Ring #267. Stocked in brown 75 durometer. They are suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200- C

Viton O-Ring #258. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 3 O-Rings per pack.

Viton O-Ring #243. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 3 O-Rings per pack.

Viton O-Ring #242. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 3 O-Rings per pack.

Viton O-Ring #240. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 3 O-Rings per pack.

Viton O-Ring #232. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 3 O-Rings per pack.

Viton O-Ring #229. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 3 O-Rings per pack.

Viton O-Ring #226. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 3 O-Rings per pack.

Viton O-Ring #225. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 3 O-Rings per pack.

Viton O-Ring #223. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 3 O-Rings per pack.

Viton O-Ring #222. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #220. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #219. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #218. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #217. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #215. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #214. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #212. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #208. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #206. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #205. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #204. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #146. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #137. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #136. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #132. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #129. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #128. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #126. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #122. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #121. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 6 O-Rings per pack.

Viton O-Ring #120. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #118. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #117. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #116. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #115. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #114. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #113. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #112. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #111. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #110. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #027. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #024. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #022. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #020. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #019. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #018. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #014. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #013. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #012. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #011. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #009. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #008. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #007. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Viton O-Ring #006. Stocked in brown 75 durometer. Suitable for acids, aliphatic hydrocarbons, oxidizing agents and all petroleum products. Viton has a low compression set and high temperature resistance. Useful temperature range of -30 to 200 C. 12 O-Rings per pack.

Removable TFE Delivery Stem. GL-18 Thread for Detachable TFE Drip Tip, Tooled Double Ended (2 Threads) Pack of 10 Threads. Virtually eliminates the breakage of standard glass stem stopcocks. Made entirely of TFE and attaches directly to the glass thread without o-rings or other gaskets.

MANIFOLD SYSTEM M16 10-20L - CG-1969-M-10

Torque Knob Only for CG-1968-Q-10 or CG-1968-Q-11

O-Ring, Perfluoro. O-ring for Chemglass reaction vessels and lids. 200mm Flange

O-Ring, Perfluoro. O-ring for Chemglass reaction vessels and lids.150mm Flange

O-Ring, Perfluoro. O-ring for Chemglass reaction vessels and lids. 100mm Flange

O-Ring, Perfluoro. O-ring for Chemglass reaction vessels and lids. 60mm Flange

O-Ring, FEP-Stainless Steel. O-ring for Chemglass reaction vessels and lids. 80mm Flange

Perfluoro O-Ring, Size:013. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:010. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

GASKET O-RING ORANGE SMA - SMA-GA-03

Accessories. Accessories for Eight-Neck Reaction Vessel Lids and Adapters, 200 mm, Chemglass - CG-1945-T-91, Replacement PTFE Plug, 1.3 cm ( 1/2 IN.) Male NPT

Accessories. Accessories for Seven-Neck Reaction Vessel Lids and Adapters, 100 mm, Chemglass - CG-1945-T-90, Replacement PTFE Plug, 0.6 cm ( 1/4 IN.) Male NPT

JAR MILL ROLLER BEARINGS - P06507

Retractable Coiled Cord. 26 gauge multi-strand wire with PVC insulation. Cord type must match thermocouple plug type on controller. T for blue plug. Connector: SMP. Length: 3m.

WHEATON® THE WHEATON CONNECTION® Connecting Adapters with Caps, DWK Life Sciences - W125495

O-Ring. For Aqueous Valve.

Chem-Vacâ„¢, PTFE Stirrer Bearings, Chemglass - CG-2077-G-04, 10 mm PTFE Chem-Vacâ„¢ Stirrer Bearing

Chem-Vacâ„¢, PTFE Stirrer Bearings, Chemglass - CG-2077-G-02, 10 mm PTFE Chem-Vacâ„¢ Stirrer Bearing

Chem-Vacâ„¢, PTFE Stirrer Bearings, Chemglass - CG-2077-G-01, 10 mm PTFE Chem-Vacâ„¢ Stirrer Bearing

HIGH VACUUM VALVES. CG-561 REPLACEMENT PLUG. Stem Complete with Control Knob. To Fite Bore: 0-20mm. Replacement Chem-Cap plug and control knob for CG-551 through CG-560 high vacuum valves. Plug is sold complete with control knob or Chem-Cap stem only. For replacement control knobs only see CG-500.

HIGH VACUUM VALVES. CG-560 VALVE, CHEM-CAP, HIGH VACUUM, 1-ARM,. Bore: 0-20mm. Valve has a single sidearm sealed at a 90[degree] angle to the barrel.

REPLACEMENT PLUG, TFE STEM, O-RING. Stem Complete with Control Knob. To Fit Bore: 0-20mm; O-Ring Type: Viton. Replacement TFE plug and control knob for CG-525 through CG-534 high vacuum valves. Available with a choice of Viton, Ethylene Propylene or Kalrez o-rings.

DISTILLING HEAD, SOLVENT, MODIFIED. Replacement Components. Replacement 2mm Double Oblique TFE Plug. Designed to maintain distilled solvents in an inert atmosphere. Top of main vapor tube is open and an additional vapor tube has been added to decrease risk of pressure buildup.

STOPCOCK, FLUOROPOLYMER RESIN, FOUR WAY. Replacement Plug for CG-443 Stopcock. Bore: 2mm; Plug Size: 15.2/30. 1:5 taper fluoropolymer resin plug has double 'V', 90 o bores to connect opposite sets of adjacent arms. Configuration of stopcock allows it to be used in system to obtain reversal of flow.

DISTILLING HEAD, VIGREUX, VACUUM JACKETED. Replacement Components. Replacement 2mm 'T'-Bore fluoropolymer resin Plug. Jacketed fractionation distilling head for use under vacuum. 10/18 top outer joint is for a 1in. immersion thermometer while the 10/30 joints are for a 2in. immersion thermometer.

DISTILLING HEAD, VIGREUX, VACUUM JACKETED. Replacement Components. Replacement 4mm 'T'-Bore fluoropolymer resin Plug. Jacketed fractionation distilling head for use under vacuum. 10/18 top outer joint is for a 1in. immersion thermometer while the 10/30 joints are for a 2in. immersion thermometer.

STOPCOCK, FLUOROPOLYMER RESIN, T-BORE. Replacement Plug for CG-436 Stopcock. Bore Size: 6; Plug Size: 24/40. A: 1:5 taper fluoropolymer resin stopcock with three stems sealed 90[degree] apart. fluoropolymer resin plug has a 'T' shaped bore to connect any two or all three stems.

HOSE CONNECTION, GLASSBLOWERS, MICRO. AxBxCxD=3.5x8x10x18mm. No of Rings: 3; Type: Regular. Used to construct small scale apparatus. Available in direct sealing or regular style. Serrations are tooled on either end of an 8in. length of 8mm O.D.x1.5mm wall tubing.

HOSE CONNECTION, GLASSBLOWERS, DIRECT SEALING. AxBxCxD=10.0x20.0x26x54mm. No of Rings: 7; Tubing O.D; 22. Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on either end of an 8in. length of tubing.

HOSE CONNECTION, GLASSBLOWERS, DIRECT SEALING. AxBxCxD=8.0x13.5x16x30mm. No of Rings: 4; Tubing O.D; 16. Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on either end of an 8in. length of tubing.

HOSE CONNECTION, GLASSBLOWERS, DIRECT SEALING. AxBxCxD=5.0x12.0x13x24mm. No of Rings: 4; Tubing O.D; 12. Connections are tooled to form a flare for sealing directly to apparatus using the tubing as a holder. Serrations are tooled on either end of an 8in. length of tubing.

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=6.0x12.0x14x26mm. No of Rings: 6; Tubing O.D; 12. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=2.5x6.5x8x20mm. No of Rings: 4; Tubing O.D; 8. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=19.0x27.0x27x22mm. No of Rings: 4; Tubing O.D; 22. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=15.0x21.0x21x22mm. No of Rings: 4; Tubing O.D; 19. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=10.0x15.0x15x20mm. No of Rings: 4; Tubing O.D; 16. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

HOSE CONNECTION, GLASSBLOWERS. AxBxCxD=6.5x13.0x15x20mm. No of Rings: 4; Tubing O.D; 16. Serrations are tooled on either end of an 8in. length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs tooled at either end).

Glassblowers Hose Connection, 4 Rings. Dimensions (mm) Tubing O.D: A - 5.0, B - 10.0, C - 11, D - 20, E - 10. Serrations are tooled on both ends of an 20.3 (8) length of tubing. Hose connections are SOLD IN PACKAGES OF 10 SERRATED CONNECTORS (5 pcs. tooled on both ends).

Glassblowers Hose Connection. 3 Rings. Dimensions (mm) Tubing O.D: A - 3.0, B - 8.0, C - 9, D - 16; E - 8.

FLOW CONTROL ADAPTER, CHROMATOGRAPHY, RODAVISS JOINT. REPLACEMENT RODAVISS COMPONENTS FOR CG-1192 THROUGH CG-1195 CHROMATOGRAPHY COLUMNS. 45/50 Loosening Ring. Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs.

LOOSENING RING, POLYAMIDE, RODAVISS. Size: 24. Split polyamide ring to enable inner and outer Rodaviss members to be pulled apart in the event of freezing. Unique design of the Rodaviss joint provides for a greaseless high vacuum seal while firmly holding glassware together without a clamp.

FLOW CONTROL ADAPTER, CHROMATOGRAPHY, RODAVISS JOINT. REPLACEMENT RODAVISS COMPONENTS FOR CG-1192 THROUGH CG-1195 CHROMATOGRAPHY COLUMNS. 24/40 Loosening Ring. Flow control adapter for use with CG-1192 and CG-1193 chromatography columns along with CG-1194 reservoirs.

JOINT, O-RING SEAL. I.D; 12mm; Tube O.D; 16mm. O-Ring Size: 116; Clamp Size: 28. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 75mm; Tube O.D; 80mm. O-Ring Size: 341; Clamp Size: 102. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 50mm; Tube O.D; 58mm. O-Ring Size: 229; Clamp Size: 75. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 40mm; Tube O.D; 45mm. O-Ring Size: 226; Clamp Size: 65. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 30mm; Tube O.D; 35mm. O-Ring Size: 223; Clamp Size: 50. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 25mm; Tube O.D; 30mm. O-Ring Size: 217; Clamp Size: 35. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 20mm; Tube O.D; 25mm. O-Ring Size: 214; Clamp Size: 35. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 15mm; Tube O.D; 20mm. O-Ring Size: 116; Clamp Size: 28. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 9mm; Tube O.D; 12mm. O-Ring Size: 112; Clamp Size: 18. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 7mm; Tube O.D; 10mm. O-Ring Size: 111; Clamp Size: 18. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

JOINT, O-RING SEAL. I.D; 5mm; Tube O.D; 8mm. O-Ring Size: 110; Clamp Size: 12. Joint has a o-ring groove to accept the listed o-ring size. Provides for a greasefree, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.

Stainless Steel Spring. Stainless steel springs used to connect apparatus having hooks. Enlarged 1/4 inch ID loop at each end for easy connection to almost any size hook. Diameter of the coils is 0.190 inch. Coil Length: 18mm. 12 springs per pack.

TUBE, CONNECTING, 'Y'-SHAPE. Tubing O.D; 12.7mm; O.D. of Middle Serration: 14.0mm. 'Y'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

TUBE, CONNECTING, 'Y'-SHAPE. Tubing O.D; 11.0; O.D. of Middle Serration: 11.0mm. 'Y'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

TUBE, CONNECTING, 'Y'-SHAPE. Tubing O.D; 8.0mm; O.D. of Middle Serration: 8.5mm. 'Y'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

TUBE, CONNECTING, 'T'-SHAPE. Tubing O.D; 12.7mm; O.D. of Middle Serration: 14.0mm. 'T'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

TUBE, CONNECTING, 'T'-SHAPE. Tubing O.D; 11.0mm; O.D. of Middle Serration: 11.0mm. 'T'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

TUBE, CONNECTING, 'T'-SHAPE. Tubing O.D; 8.0mm; O.D. of Middle Serration: 8.5mm. 'T'-shape tube having serrated ends for connection of rubber, latex or Tygon tubing.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size: 20-400. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size:13-425. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size: 8-425. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size: 20-400. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size: 13-425. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT SEPTA, MINUM-WARE. Fits Cap Size: 8-425. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware glassware components.

REPLACEMENT CAPS WITH OPENING, MINUM-WARE. Thread Size: 20-400. Used with Viton O-Rings and threaded outer joints for making grease free, vacuum tight seals on 14/10 MINUM-WARE glassware components.

REPLACEMENT CAPS WITH OPENING, MINUM-WARE. Thread Size: 8-425. Used with Viton O-Rings and threaded outer joints for making grease free, vacuum tight seals on 14/10 MINUM-WARE glassware components.

REPLACEMENT O-RINGS, VITON. O-Ring Size: 014. Used with open-top screw caps and threaded outer joints for making grease free, vacuum tight seals on 14/10 MINUM-WARE glassware components. O-rings are color coded BROWN for easy identification. Supplied inpackages of 12 or 144 each.

KRYTOX FLUORINATED GREASE. LVP Grade. 2 oz. Krytox LVP. Krytox LVP grease is made with low vapor pressure fluorinated oils and is designed for use in high vacuum applications down to 10 (-2) Torr at 20[degree]C, and 10(-5) Torr at 200[degree]C.

Krytox G.P. Grease, 59mL (2oz) Tube. Highly inert, non-flammable grease for use with standard taper joints and glass stopcocks. Insoluble in almost all solvents except Freon 113. Demonstrated an exceptionally high degree of chemical inertness to many highly reactive chemicals.

O-RING REPLACEMENT KITS, GLASS STEM. To Fit Plug Size: 0-4; O-Ring Type: Viton. Tip O-Ring Size: 007. Shaft O-Ring Size: 009. Each kit contains a set of three o-rings, one for the tip and two for the barrel seal. O-ring sizes are listed in the following Chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-20mm; O-Ring Type: Kalrez. Tip O-Ring Size: 208. Shaft O-Ring Size: 210. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-20mm; O-Ring Type: Viton. Tip O-Ring Size: 208. Shaft O-Ring Size: 210. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-12mm; O-Ring Type: Kalrez. Tip O-Ring Size: 110. Shaft O-Ring Size: 112. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-8mm; O-Ring Type: Kalrez. Tip O-Ring Size: 108. Shaft O-Ring Size: 110. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-4mm; O-Ring Type: Kalrez. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-12mm; O-Ring Type: Viton. Tip O-Ring Size: 110. Shaft O-Ring Size: 112. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-8mm; O-Ring Type: Viton. Tip O-Ring Size: 108. Shaft O-Ring Size: 110. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

O-RING REPLACEMENT KIT, TFE AND CTFE STEM. To Fit Plug Size: 0-4mm; O-Ring Type: Viton. Tip O-Ring Size: 007. Shaft O-Ring Size: 010. Each kit contains a set of three o-rings, one for the tip and two for the barrel seat. O-ring sizes are listed in the following chart.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 24/40; Nut. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 24/40; Washer. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 16/35; Nut. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 16/35; Washer. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 16/35; O-Ring. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 15.2/30; Nut. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 15.2/30; Washer. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 15.2/30; O-Ring. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 14.4/44; Nut. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 14.4/44; Washer. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 14.4/44; O-Ring. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 12.9/44; Nut. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 12.9/44; Washer. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 12.9/44; O-Ring. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 11/25; Washer. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

REPLACEMENT COMPONENTS FOR 1:5 TAPER FLUOROPOLYMER RESIN PLUGS. Plug Size: 11/25; O-Ring. Replacement components for 1:5 taper fluoropolymer resin plugs are all sold in packages of 12. O-rings are Viton, nuts are green while the washers are white.

SILICONE SEALS, PKG. 10. REPLACEMENT PPN HOSE CONNECTION SET FOR CG-1560 AND CG-1562 DURAN FILTER FLASKS. Pkg. of 10 Silicone Seals. Set consists of: one PPN tubulation; silicone rubber seal; Male PPN hose connection and Female PPN connection.

REPLACEMENT PPN HOSE CONN. SET. REPLACEMENT PPN HOSE CONNECTION SET FOR CG-1560 AND CG-1562 DURAN FILTER FLASKS. Set of PPN Connection. Set consists of: one PPN tubulation; silicone rubber seal; Male PPN hose connection and Female PPN connection.

O'RING, FLUOROPOLYMER RESIN COVERED, 200MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: fluoropolymer resin Covered; Fits Flange I.D; 200mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

EXTRACTION APPARATUS, JUMBO. Replacement Components. O-Ring, fluoropolymer resin/Silicone, 150mm. Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor.

O'RING, FLUOROPOLYMER RESIN COVERED, 120MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: fluoropolymer resin Covered; Fits Flange I.D; 120mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

EXTRACTION APPARATUS, JUMBO. Replacement Components. O-Ring, fluoropolymer resin/Silicone, 100mm. Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor.

EXTRACTION APPARATUS, JUMBO. Replacement Components. O-Ring, fluoropolymer resin/Silicone, 60mm. Jumbo Soxhlet extraction apparatus equipped with a Duran flange at the top of the extractor.

O'RING, SILICONE, 200MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: Silicone; Fits Flange I.D; 200mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

O'RING, SILICONE, 150MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: Silicone; Fits Flange I.D; 150mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

O'RING, SILICONE, 120MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: Silicone; Fits Flange I.D; 120mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

O'RING, SILICONE, 100MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: Silicone; Fits Flange I.D; 100mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

O'RING, SILICONE, 60MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: Silicone; Fits Flange I.D; 60mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

O'RING, VITON, 200MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: Viton; Fits Flange I.D; 200mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

O'RING, VITON, 150MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: Viton; Fits Flange I.D; 150mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

O'RING, VITON, 120MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: Viton; Fits Flange I.D; 120mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

O'RING, VITON, 100MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: Viton; Fits Flange I.D; 100mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

O'RING, VITON, 60MM. O-rings for CG-147 Duran Reaction Kettle Flanges. O-Ring Material: Viton; Fits Flange I.D; 60mm. Flange is formed with a groove in the flat portion of the mating surface to accept an o-ring.

Accessories for Modular Tangential Flow System, Sartorius - VFA005, Y connector (size 15 to 2× size 16) for Vivaflow® 200

Inline Power Supply 115V Ovrhd Drives. Inline Power Supply 115v, for over head drives

Ferrule Gripper Set Pvdf Ferrule 10Mm. Ferrule/Gripper Set, Tube Compression Replacements Consisting Of One Each Pvdf Ferrule And Gripper, Size: 10Mm

Ferrule Gripper Set Tube Replacement 6Mm. Ferrule/Gripper Set, Compression Replacements Consisting Of One Each Pvdf Ferrule And Gripper, Size: 6Mm Tube

Ferrule Gripper Set Tube Replacement 1In. Ferrule/Gripper Set, Tube Compression Replacements Consisting Of One Each Pvdf Ferrule And Gripper, Size: 1In

Ferrule Gripper Set Pvdf Ferrule 3/4In. Ferrule/Gripper Set, Tube Compression Replacements Consisting Of One Each Pvdf Ferrule And Gripper, Size: 3/4In

Ferrule Gripper Set Pvdf Ferrule 1/2In. Ferrule/Gripper Set, Tube Compression Replacements Consisting Of One Each Pvdf Ferrule And Gripper, Size: 1/2In

Ferrule Gripper Set Pvdf Ferrule 3/8In. Ferrule/Gripper Set, Tube Compression Replacements Consisting Of One Each Pvdf Ferrule And Gripper, Size: 3/8In

Tube Fitting Ptfe No50 Acethred To 3/8In. Tube Fitting, Ptfe Number 50 Ace-Thred To 3/8In Od Tube Compression Fitting

Tube Fitting Ptfe No25 Acethred To 3/8In. Tube Fitting, Ptfe Number 25 Ace-Thred To 3/8In Od Tube Compression Fitting

Tube Fitting Ptfe No11 Acethred To 3/8In. Tube Fitting, Ptfe Number 11 Ace-Thred To 3/8In Od Tube Compression Fitting

Tube Fitting Ptfe No7 Acethred To 3/8In. Tube Fitting, Ptfe Number 7 Ace-Thred To 3/8In Od Tube Compression Fitting

Tube Fitting Ptfe No50 Acethred - 5/16In. Tube Fitting, Ptfe Number 50 Ace-Thred To 5/16In Od Tube Compression Fitting

Tube Fitting Ptfe No 25 Acethred -5/16In. Tube Fitting, Ptfe Number 25 Ace-Thred To 5/16In Od Tube Compression Fitting

Tube Fitting Ptfe No15 Acethred- 5/16In. Tube Fitting, Ptfe Number 15 Ace-Thred To 5/16In Od Tube Compression Fitting

Tube Fitting Ptfe No7 Acethred To 5/16In. Tube Fitting, Ptfe Number 7 Ace-Thred To 5/16In Od Tube Compression Fitting

Tube Fitting Ptfe No50 Acethred To 1/4In. Tube Fitting, Ptfe Number 50 Ace-Thred To 1/4In Od Tube Compression Fitting

Ferrule Gripper Set Pvdf Ferrule 1/4In. Ferrule/Gripper Set, 1/4In Tube Compression Replacements Consisting Of One Each Pvdf Ferrule And Gripper, Size:

Tube Fitting Ptfe No25 Acethred To 1/4In. Tube Fitting, Ptfe Number 25 Ace-Thred To 1/4In Od Tube Compression Fitting

Tube Fitting Ptfe No15 Acethred To 1/4In. Tube Fitting, Ptfe Number 15 Ace-Thred To 1/4In Od Tube Compression Fitting

Tube Fitting Ptfe No11 Acethred To 1/4In. Tube Fitting, Ptfe Number 11 Ace-Thred To 1/4In Od Tube Compression Fitting

Tube Fitting Ptfe No50 Acethred To 1/8In. Tube Fitting, Ptfe Number 50 Ace-Thred To 1/8In Od Tube Compression Fitting

Tube Fitting Ptfe No25 Acethred To 1/8In. Tube Fitting, Ptfe Number 25 Ace-Thred To 1/8In Od Tube Compression Fitting

Tube Fitting Ptfe No15 Acethred To 1/8In. Tube Fitting, Ptfe Number 15 Ace-Thred To 1/8In Od Tube Compression Fitting

Connector, Ace-Safe, Number 15 To 3/8In Id Tubing, Silicone O-Ring.

Connector, Ace-Safe, Number 11 To 3/8Inid Tubing, Silicone O-Ring.

Plug Solid Ptfe Silicone O-Ring No 7. Solid Tube Fitting, Ptfe Plug, Number 7, 7855-212 Silicone O-Ring Back Seal

Reflector Nozzle, Steinel America - 7461, Reflector Nozzle, 14 mm

SOCKET 9/32 IN 6 POINT 1/4 IN DRIVE 6/BX - 4709

Pomona Banana BNC to BNC Cables, Testequity - 5697-12, Pomona Banana BNC to BNC Cable

Pomona Banana BNC to BNC Cables, Testequity - 5697-60, Pomona Banana BNC to BNC Cable

TE Connectivity Crimping Tools, Mouser Electronics - 91516-1, Certi-Crimp II Crimpers

TE Connectivity Crimping Tools, Mouser Electronics - 9-456134-8, Crimper Insulation, Female, 0.062 IN.

Extraction Tool, Newark/Element - 843996-3

Soldering Irons and Supplies, American Hakko Products - RFQ2448-01, Nozzle Hot Air,13.6×54.2 mm

Speedaire Coupler Body Plugs, Zoro - 30E657, Coupler Plug, Male NPT

Standard SMD Desoldering Nozzles, American Hakko Products - A1186B, Hot Air Nozzle, TSOL

Desoldering Hot Air Nozzles, N51 Series, American Hakko Products - N51-15

Desoldering Hot Air Nozzles, N51 Series, American Hakko Products - N51-21

Desoldering Hot Air Nozzles, N51 Series, American Hakko Products - N51-22

Standard SMD Desoldering Nozzles, American Hakko Products - A1215B, Hot Air Nozzle, QFP

Test Lead, Micrograbber, 5053 Series, Newark/Element - 5053-24-2, Minigrabber® Test lead, hook clip to 4 mm banana plug

Test Lead, Micrograbber, 5053 Series, Newark/Element - 5053-24-0, Test Lead, Micrograbber, Hook Clip to 4 mm Banana Plug

ASSEMBLY LOCATOR - 63819-2375

Test Lead Set, Newark/Element - 5309A, Test lead set, test tip probe to 4 mm banana plug, 10 A

Minigrabbers, Newark/Element - 4723-0, Minigrabber with Banana Jack, Black

Minigrabbers, Newark/Element - 4723-2, Minigrabber with Banana Jack, Red

Amp-TE Connectivity Hand Crimp Tool, Newark/Element - 49935, Hand Crimp Tool

Extension Cords, Mountz - 144180, Extension cord

NOZZLE REDUCTION 9/16 INCH - 495-49-80-0306

ITT Cannon Crimping Tools, Digi-Key - 030-2415-001, Contact Gold Signal Non-Gendered Crimper, 18-20 AWG

Hose Assemblies, Bergdahl Associates - 280002, Semco® Hose Assembly

Speedaire Coupler Body Plugs, Zoro - 30E575, Coupler Body, Hose Barb

Clamps, Newark/Element - M85049/38-15W, Circular Clamp Connector, Size 15

Clamps, Newark/Element - M85049/38-13W, Circular Clamp Connector, Size 13

D SUB BACKSHELL UNC 4-40 DD 180 ZINCBODY - 8655MH5011LF

Banana Jack Connectors, Digi-Key - J152, Banana Jack Connector

Banana Jack Connectors, Digi-Key - J151, Banana Jack Connector

Reflector Nozzle, Steinel America - 7301, Reflector Nozzle, 75 mm

Spray Guns, Zoro - EGA-503-390F, Conventional Spray Gun. Conventional spray gun, height 10 IN.

PPG Aerospace® Semco® Long Nozzles, Bergdahl Associates - 700036, Disposable 4 IN. Nozzle with 30° Bend, 1/16 IN. Orifice

Conductive Dust Caps, Newark/Element - 025-1156-001, Conductive Dust Cap, BKAD ICR

Conductive Dust Caps, Newark/Element - 025-1155-001, Conductive Dust Cap, BKAD Series

KIT RIGHT ANGLE SAFETY STANDARD - 8043S

PIN MINI CONTACT TYPE 15 STANDARD PK1000 - DCC-12C

Conductive Caps, CEC Series, Protective Industries - CEC-05, Conductive Caps, Ø 14.22 mm

Reflector Nozzle, Steinel America - 7061, Reflector Nozzle, 9 mm

ITT Cannon Crimping Tools, Digi-Key - 030-2409-001, Contact Gold Signal Non-Gendered Crimper, 20-22 AWG

O-Rings, O-Rings West - N50-110, O-Ring, Nitrile, 50 Durometer

ADAPTER FULL POLISH 3/8F X1/4 M IN 1IN - 5255

Conductive Plugs, CEP Series, Protective Industries - CEP-18, Connective Plugs, Ø 31.75 mm

Accessories for SEMCO® Cartridges, Bergdahl Associates - 220548, Semco ® Standard Nozzles, 430

Pomona Banana Plug Patch Cord, Jensen Tools - B-18-2, Pomona banana plug patch cord stack

Pomona Banana Plug Patch Cord, Jensen Tools - 24198.1, Pomona banana plug patch cord stack

SCREW SET NO 13 F/SX70 HEATERS AND OLDER - 1348-0547-P10

Minigrabber® Test Clip Patch Cords, Jensen Tools - 4613-24-2, Minigrabber® test clip patch cord

Pomona BNC Cables Assembly with Male on Each End, Testequity - 2249-C-6, Pomona BNC Cable Assembly with Male

Test Adapters, Jensen Tools - 6249-24-0, Minigrabber test clip

Banana Plugs, Testequity - 4690-2, 22-Gauge Male Pin to Banana Jack, Red

Banana Plugs, Testequity - 4690-0, 22-Gauge Male Pin to Banana Jack, Black

Minigrabber® Test Clip Patch Cords, Jensen Tools - 4613-24-0, Minigrabber® test clip patch cord

Minigrabber® Patch Cords, Jensen Tools - 3782-12-0, Patch cord, Minigrabber® to multi-stacking banana plug

Pomona BNC Cables Assembly with Male on Each End, Testequity - 2249-C-72, Pomona BNC Cable Assembly with Male

Pomona Banana Plug Patch Cord, Jensen Tools - B-24-2, Pomona banana plug patch cord

Pomona Banana Plug Patch Cord, Jensen Tools - B-24-0, Pomona banana plug patch cord

Pomona Banana Plug Patch Cord, Jensen Tools - 25437.1, Pomona banana plug patch cord

Pomona Banana Plug Patch Cord, Jensen Tools - 32900.1, Pomona banana plug patch cord

Test Adapters, Jensen Tools - 5952A, Retractable tip probe to banana

Paint Cans, Klinger Paint - 005-7201-010, —, Paint Medium Strainer, #250

Glass Double Oblique Manifold Plug replacement, Includes glass plug and retainer.

T Connector Fitting Packs, Foxx Life Sciences - 25P-2710-OEM

T Connector Fitting Packs, Foxx Life Sciences - 25P-2709-OEM

T Connector Fitting Packs, Foxx Life Sciences - 25P-2708-OEM

T Connector Fitting Packs, Foxx Life Sciences - 25P-2707-OEM

T Connector Fitting Packs, Foxx Life Sciences - 25P-2706-OEM

T Connector Fitting Packs, Foxx Life Sciences - 25P-2705-OEM

T Connector Fitting Packs, Foxx Life Sciences - 25P-2704-OEM

T Connector Fitting Packs, Foxx Life Sciences - 25P-2703-OEM

T Connector Fitting Packs, Foxx Life Sciences - 25P-2702-OEM

T Connector Fitting Packs, Foxx Life Sciences - 25P-2701-OEM

Reducer Connector Fitting Packs, Foxx Life Sciences - 25P-2510-OEM

Reducer Connector Fitting Packs, Foxx Life Sciences - 25P-2509-OEM

Reducer Connector Fitting Packs, Foxx Life Sciences - 25P-2508-OEM

Reducer Connector Fitting Packs, Foxx Life Sciences - 25P-2507-OEM

Reducer Connector Fitting Packs, Foxx Life Sciences - 25P-2506-OEM

Reducer Connector Fitting Packs, Foxx Life Sciences - 25P-2505-OEM

Reducer Connector Fitting Packs, Foxx Life Sciences - 25P-2504-OEM

Reducer Connector Fitting Packs, Foxx Life Sciences - 25P-2503-OEM

Reducer Connector Fitting Packs, Foxx Life Sciences - 25P-2502-OEM

Reducer Connector Fitting Packs, Foxx Life Sciences - 25P-2501-OEM

Y Connector Fitting Packs, Foxx Life Sciences - 255-2606-OEM

Y Connector Fitting Packs, Foxx Life Sciences - 255-2605-OEM

Y Connector Fitting Packs, Foxx Life Sciences - 255-2604-OEM

Y Connector Fitting Packs, Foxx Life Sciences - 255-2603-OEM

Y Connector Fitting Packs, Foxx Life Sciences - 255-2602-OEM

Y Connector Fitting Packs, Foxx Life Sciences - 255-2601-OEM

Calibrex Interchangeable Flow Control Stopcock, Application: For all 525, 530 Dispensers.

GASKET RUBBER - 27ACJN

Gasket pack-36. Gasket, beaker ring, lower, 1/16 standard, for goldfish fat extractor. Fat extractor acces.

Ace-Safe PTFE Tubing Connectors, Ace Glass Incorporated - 5858-14, Tubing Connector with Bushing

Ace-Safe PTFE Tubing Connectors, Ace Glass Incorporated - 5858-12, Tubing Connector with Bushing

Ace-Safe PTFE Tubing Connectors, Ace Glass Incorporated - 5858-10, Tubing Connector with Bushing

Ace-Safe PTFE Tubing Connectors, Ace Glass Incorporated - 5858-07, Tubing Connector with Bushing

Ace-Safe PTFE Tubing Connectors, Ace Glass Incorporated - 5858-03, Tubing Connector with Bushing

4Mm 3-Way PTFE Stopcock Plug. Cs/6, Sp/1

2Mm 3-Way PTFE Stopcock Plug. Cs/6, Sp/1

4Mm 2-Way PTFE Stopcock Plug. Cs/6, Sp/1

2Mm 2-Way PTFE Stopcock Plug. Cs/6, Sp/1

6.5Lpm Filter Pump. Cs/12

12.7Mm Connector Y-Type. Cs/72, Sp/12

9.5Mm Connector Y-Type. Cs/72, Sp/12

6.4Mm Connector Y-Type. Cs/72, Sp/12

9.5Mm Connectors T-Type. Cs/72, Sp/12

4.8Mm Connectors T-Type. Cs/72, Sp/12

PYREX brand, Connecting, [standard taper] 10/30 Thermometer Opening, 75[degree] Angle, Three-Way. 10/30. 24/40. 160 mm. The sidearm is at an angle approximately 75[degree] from the lower joint. The lower end and sidearm are equipped with inner [standard taper] 24/40 joints.

PYREX brand, Connecting, 105[degree] Angle, Two-Way, Suction Tube, [standard taper] Joints, Adapter. 24/40. 295 mm. Stem Length:170 mm. A receiver adapter with a vacuum connection. The vacuum tube O.D. is 10mm.

Support Ring, Extension, Iron. 76mm ring is forged of hot-rolled, plated steel wire with an integral plain shank. Stem is 190.5mm.

Accessories for Synthware Reaction Flask with Glass Stopcock, Kemtech America - S692044, Replacement Stainless Steel Retention Kit for Glass Stopcocks

Accessories for Synthware Reaction Flask with Glass Stopcock, Kemtech America - S691656, Replacement Stainless Steel Retention Kit for Glass Stopcocks

PLUG RETENTION KIT SS 17.35/50 - S691750

Accessories for Synthware Reaction Flask with Glass Stopcock, Kemtech America - S691740, Replacement Stainless Steel Retention Kit for Glass Stopcocks

Accessories for Synthware Modified Schlenk Tube Flask, Kemtech America - S691230, Replacement S.S. Retention for Glass Stopcock, 2 mm (12/30 ST joint size)

Synthware Viton® O-Ring, Kemtech America - R331, Viton® O-Ring

Synthware Viton® O-Ring, Kemtech America - R226, Viton® O-Ring

RUBBER WASHER 23700UM PK12 - PT23-R

RUBBER WASHER 15500UM PK12 - PT15-R

Accessories for Cloud and Pour Point Apparatus, Koehler - AS568-219, Gasket for test jar

O-Ring Seal. For use in the air/gas chamber of the Reid Vapor Pressure Cylinder (52941-464).

STEEL BALL 3/8IN PK10 - H-1580

Ball Retaining Ring. Replacement part for Softening Point Apparatus (52938-302).

Neoprene Gasket. Replacement gasket for Model 744 mill, size 1 and 2.

Neoprene Gasket. Replacement gasket for Model 744 mill, size 0 and 00.

Quick Disconnect. Polyethylene connectors are ideal for vacuum applications, water lines, manometers, etc.

Faucet. 12.7mm bore (1/2 in) needle-type polyethylene faucet with a male threaded outlet. Teflon O-ring. Accommodates standard 19mm x 292mm (3/4in x 11-1/2in) threads per inch. Garden hose coupling. 3/4 inch NPT.

0-20 Fluoropolymer Resin Drain Plug. With Aegis O-ring, for CG-511-01 or CG-511-02.

BULB HOLDER MINI PORCELAIN CS50 - 120012-50

BULB HOLDER MINI PORCELAIN EA - 120012

BULB HOLDER MINI PORCELAIN PK10 - 120012-10

Banana Plug/Alligator Clip Cord 12inch Black. Banana Plug/Alligator Clip Cord, 12in, Colour: Black, Flexible, 18 gauge (SWG) stranded wire cord with a stackable banana plug at one end and an alligator clip at the other end, Alligator clip has a protective vinyl sheath, 3 red, 3 black

Banana Plug/Alligator Clip Cord 12inch Red. Banana Plug/Alligator Clip Cord, 12in, Colour: Red, Flexible, 18 gauge (SWG) stranded wire cord with a stackable banana plug at one end and an alligator clip at the other end, Alligator clip has a protective vinyl sheath, 3 red, 3 black

Banana Plug/Alligator Clip Cord 24inch. Banana Plug/Alligator Clip Cord, 24in, Flexible, 18 gauge (SWG) stranded wire cord with a stackable banana plug at one end and an alligator clip at the other end, Alligator clip has a protective vinyl sheath, 3 red, 3 black

Banana Plug/Alligator Clip Cord 12inch. Banana Plug/Alligator Clip Cord, 12in, Flexible, 18 gauge (SWG) stranded wire cord with a stackable banana plug at one end and an alligator clip at the other end, Alligator clip has a protective vinyl sheath, 3 red, 3 black

Alligator Clip Lead 24inch. Alligator Clip Lead, 24in, Flexible, 18 gauge (SWG) stranded wire cord with alligator clips at both ends, protective vinyl sheath, 3 Red, 3 Black

Alligator Clip Lead 12inch. Alligator Clip Lead, 12in, Flexible, 18 gauge (SWG) stranded wire cord with alligator clips at both ends, protective vinyl sheath, 3 Red, 3 Black

Miniature Lamp Holder for miniature base lamp, plastic holder includes fahnestock clips for quick, easy connections

Alligator Clip/Banana Plug Cords - WAB024-R, Alligator Clip & Banana Plug Cord, Red, 61 cm (25 IN.)

Wire Leads with Alligator Clips - WAG024-B, Wire Leads, Black, w/ Alligator Clips

Wire Leads with Alligator Clips - WAG024-R, Wire Leads, Red w/ Alligator Clips

Lamp Holder. Miniature lamp Holders Plastic, spring posts, with brass screw type receptacle and two terminals.

Lead Set, Banana Plug to Alligator Clip - CT3416, Lead Set, Banana Plug to Alligator Clip

Enameled Copper Magnet Wire - E-20, Wire, Enameled Copper Magnet, 20 Gauge, 94 m, 454 grams

Bulb socket board - PH60122A/1-B, Three-Socket

Bulb socket board - PH60122A/3, Five-Socket

Enameled Copper Magnet Wire - E-22, Wire, Enameled Copper Magnet, 22 Gauge, 149 m, 454 grams

Push-Button Switch - 62795-00, Push Button Switch

Enameled Copper Magnet Wire - E18, Wire, Enameled Copper Magnet, 18 Gauge, 61 m, 454 grams

Annunciator Wire (Bell Wire) - 18A-SCIEN, Wire, Annunciator, 18 Gauge, 12 m 113 grams

CEJN PLUG + NUT ASSEMBLY - 4059254

SCHRADER PLUG+NUT ASSEMBLY - 4059250

PLUG + UNION ASSY FOSTER SS - 4051992

SNAPTITE PLUG + NUT ASSEMBLY - 4059252

HANSEN PLUG + NUT ASSEMBLY - 4059248

PYREX brand, Connecting, Claisen type, Three-Way, [standard taper] Joints, Adapter. 19/22. 123 mm. This tube is also a replacement part for organic chemistry kits Nos. 6949E. 6949G-2 and 6949K. A three-way tube with two outer and one inner joint of the same size.

PYREX brand, Connecting, 75[degree] Angle, Three-Way, [standard taper] Joints, Adapter. 19/22. 105 mm. This tube is also a replacement part for organic chemistry kits Nos. 6949E, 6949G-2 and 6949K. The sidearm is at an angle approximately 75[degree] from the lower joint.

CoolCube™ Microtube and Microplate Cooler, Chemglass - CLS-3200-001, 36× 1.5 ml tubes; 96× 0.2 ml tubes; 12× 0.2 ml strips; 1× 96-well PCR plate, CoolCube™ Microtube and Microplate Cooler

Accessories for Shaker Flasks with Six Bottom Baffles, Chemglass - CLS-1487-72, Silicone Liner for 70 mm Solid Cap

LINER SILICONE FOR 100MM CAP - CLS-1487-102

Accessories for Shaker Flasks with Six Bottom Baffles, Chemglass - CLS-1484-A-72, Silicone Gasket for 70 mm Vented Cap

Pouring Rings, Chemglass - CLS-1482-17, Pouring Ring, GL-45, Clear, Polypropylene

Pouring Rings, Chemglass - CLS-1482-16, Pouring Ring, GL-45, Yellow, Polypropylene

Pouring Rings, Chemglass - CLS-1482-15, Pouring Ring, GL-45, Gray, Polypropylene

Pouring Rings, Chemglass - CLS-1482-14, Pouring Ring, GL-45, Green, Polypropylene

Pouring Rings, Chemglass - CLS-1482-13, Pouring Ring, GL-45, Blue, Polypropylene

Pouring Rings, Chemglass - CLS-1482-12, Pouring Ring, GL-32, Clear, Polypropylene

Pouring Rings, Chemglass - CLS-1482-11, Pouring Ring, GL-32, Blue, Polypropylene

PM KIT FOR OVERHEAD MOTORS - CLS-1440-K1

FRIT GLASS 40-60 MICRON - CLS-1437-G1

FRIT ONLY SPARGER #316SS 10MIC - CLS-1437-F75

COMPRESSION FITTING 9MM - CLS-1430-003

COMPRESSION FITTING 7MM BLACK - CLS-1430-001

GASKET SILICONE GL 32 WHITE - CLS-1428-14

O-RING #118FLUOROSILICONE BLUE - CG-305-F-118

COMPRESSION FITTING TEE3/4PFA - CG-1975-T-24

COMPRESSION FITTING TEE1/2PFA - CG-1975-T-22

COMPRESSION FITTING TEE1/4PFA - CG-1975-T-20

COMPRESSION NUT/RING 3/4IN - CG-1975-N-22

COMPRESSION NUT/RING 1/2IN - CG-1975-N-20

COMPRESSION NUT/RING 1/4IN - CG-1975-N-18

COMPRESSION NUT/RING 1/8IN - CG-1975-N-16

ADAPTER PFA STR1/2 TO 1/4NPT - CG-1975-F-20

ADAPTER PFA STR1/4 TO 1/4NPT - CG-1975-F-18

ADAPTER PFA STR1/8 TO 1/4NPT - CG-1975-F-16

COMPRESN ADAPTER1/2INTO1/4 NPT - CG-1975-E-20

COMPRESN ADAPTER1/4INTO1/4 NPT - CG-1975-E-18

COMPRESN ADAPTER1/8INTO1/4 NPT - CG-1975-E-16

COMPRESSION FIT ELBOW 3/4 PFA - CG-1975-D-24

COMPRESSION FIT ELBOW 1/2 PFA - CG-1975-D-22

COMPRESSION FIT ELBOW 1/4 PFA - CG-1975-D-20

COMPRESSION FITTING1/4 TO1/4IN - CG-1975-19

COMPRESSION FITTING1/8 TO1/2IN - CG-1975-18

COMPRESSION FITTING1/4 TO1/8IN - CG-1975-16

PTFE SPLIT LOCKING RING - CG-1969-X-120

ADAPTERSS 30MM M16MALE THRD90C - CG-1969-V-10

QUICK DISCONNECT PLUG 1/2 - CG-1969-Q-79

QUICK DISCON FE 1/2IN 316 SS M - CG-1969-Q-77

Adapters, Distilling/Splitting, Process Reactors, Angled, Chemglass - CG-1235-B-29, Adapter, Distilling/Splitting, Angled, 1/2 IN. Compression Fitting, Process Reactor

Adapters, Distilling/Splitting, Process Reactors, Angled, Chemglass - CG-1235-B-24, Adapter, Distilling/Splitting, Angled, 1/2 IN. Compression Fitting, Process Reactor

Accessories for Distillation Shelf and Glassware Kit, Chemglass - CG-1235-A-45, Adapter, Distillation 45/50

Adapters, Distilling/Splitting, Process Reactors, Chemglass - CG-1235-A-29, Adapter, Distilling/Splitting, 0 - 4 mm Valve, 1/2 IN. Compression Fitting, Process Reactor

Adapters, Distilling/Splitting, Process Reactors, Chemglass - CG-1235-A-24, Adapter, Distilling/Splitting, 0 - 4 mm Valve, 1/2 IN. Compression Fitting, Process Reactor

Reflux Condensers, Double Cooling, Chemglass - CG-1217-A-29, Reflux Condenser, Double Cooling

Reflux Condensers, Double Cooling, Chemglass - CG-1217-A-24, Reflux Condenser, Double Cooling

Condensers, Reflux, Coil Type, Removable Hose Connections, Chemglass - CG-1213-J-HC02, Reflux Condenser

Condensers, Reflux, Coil Type, Removable Hose Connections, Chemglass - CG-1213-J-HC01, Reflux Condenser

Condensers, Reflux, Chemglass - CG-1213-J-02, Reflux Condenser

Condensers, Reflux, Chemglass - CG-1213-J-01, Reflux Condenser

Replacement PTFE Product Standard 6mm Straight Bore Stopcock Plug Assembly.

Replacement PTFE Product Standard 4mm Straight Bore Stopcock Plug Assembly.

Replacement Tube, with standard taper joints, Material: Borosilicate glass, Accessories for PYREX Kjeldahl Nitrogen Distilling Apparatus

Accessories for Flow Control Adapters with Spherical Joings, Chemglass - CG-971-01, Replacement Metering Plug, 0-4 mm

0-12 CHEM-CAP PLUG WITH KNOB - CG-961-03

Accessories for Airfree Storage Flasks, Schlenk, Chemglass - CG-961-02, Chem-Vac Plug with Control Knob, 0 - 8mm

0-12 EXPOSED PLUG WITH KNOB - CG-935-03

0-8 EXPOSED PLUG WITH KNOB - CG-935-02

0-4 EXPOSED PLUG WITH KNOB - CG-935-01

SILICONE #213 TFE ENCAPSOLATED - CG-1968-P-22

Accessories for Reaction Vessels, Chemglass - CG-147-77

Accessories for Reaction Vessels, Chemglass - CG-147-76

Accessories for Reaction Vessels, Chemglass - CG-147-75

Gaskets for Bell Jars. Type L Neoprene gaskets for bell jars with 457mm O.D.

Gaskets for Bell Jars. Type L Neoprene gaskets for bell jars with 305-318mm O.D.

Gaskets for Bell Jars. Type L Neoprene gaskets for bell jars with 254-260mm O.D.

SP Wilmad-LabGlass Open Top Caps, SP Industries - LG-10818-110

CONCENTRIC RING 6 IN - 34002605

NUT 3/4 - 36530750

SEAL WAHER - 36525437

O RING 7/8 X 1-1/8 X 1/8 - 36232136

LOCK RING GREEN - 34000095

Category