• 0
Shop Products $

Trap R-E A-S 24/40-14/20 100Ml.

Trap R-E A-S 24/40-14/20 250Ml.

Trap R-E A-S 24/40-24/40 100Ml.

Trap Dist 24/40-24/40 100Ml.

Trap R-E A-S 24/40-24/40 250Ml.

Trap Bump Oval 29/32 29/32. Trap bump elliptical 29/32 top 29/32 bottom

Powder Funnel, Flat 255Mm 71/60. Powder funnel, flat 255mm 71/60

Powder Funnel, Flat 145Mm 29/42. Powder funnel, flat 145mm 29/42

Powder Funnel, Flat 145Mm 29/32. Powder funnel, flat 145mm 29/32

Vacuum Trap, Two-Piece, Bent Vertical Tube, Ace Glass Incorporated - 8760-74, Vacuum Trap, Complete

Vacuum Trap, Two-Piece, Bent Vertical Tube, Ace Glass Incorporated - 8760-64, Vacuum Trap, Complete

Vacuum Trap, Two-Piece, Bent Vertical Tube, Ace Glass Incorporated - 8760-24, Vacuum Trap, Complete

Vacuum Trap, Two-Piece, Bent Vertical Tube, Ace Glass Incorporated - 8760-18, Vacuum Trap, Complete

Vacuum Trap, Two-Piece, Bent Vertical Tube, Ace Glass Incorporated - 8760-12, Vacuum Trap, Complete

Vacuum Trap, with Reservoir, Ace Glass - 8756-212, Vacuum Trap, with Reservoir, Safety Coated, with Lid

Vacuum Traps, Ace Glass - 8753-74, Complete Vacuum Trap

Accessories for Vacuum Traps, Ace Glass - 8753-72, Replacement Inner Tube

Accessories for Vacuum Traps, Ace Glass - 8753-70, Replacement Outer Body

Vacuum Traps, Ace Glass - 8753-64, Complete Vacuum Trap

Accessories for Vacuum Traps, Ace Glass - 8753-62, Replacement Inner Tube

Accessories for Vacuum Traps, Ace Glass - 8753-60, Replacement Outer Body

Trap, Rotary Evaporator, Anti-Splash, Ace Glass Incorporated - 6705-12, 250 ml, Trap

Rotary Evaporator Traps, Anti-Splash, Ace Glass Incorporated - 6704-14, 250 ml (8.5 oz.)

FLANGE STYLE VACUUM TRAP 58MM OD X 280MM L, #75 CLAMP AND O-RING.

FLANGE STYLE VACUUM TRAP 45MM OD X 280MM L, #50 CLAMP AND O-RING.

FLANGE STYLE VACUUM TRAP 38MM OD X 280MM L, #40 CLAMP AND O-RING.

FLANGE STYLE VACUUM TRAP 28MM OD X 215MM L, #35 CLAMP AND O-RING.

HIGH VACUUM INLET ARM ONLY, STOPCOCK PLUG INCLUDED.

HIGH VACUUM TRAP BODY ONLY.

HIGH VACUUM TRAP SYSTEM COMPLETE, INCLUDES DEWAR, TRAP BODY, INLET ARM, STOPCOCK PLUGS AND CONNECTION ADAPTERS.

COMPLETE DRY ICE CONDENSER / TRAP, ACE-SAFE CONNECTORS, VALVE BOTTOM.

Inner Trap. C & Cr Assemblies, Buchi 00672.

8759 VACUUM TRAP. 12MM VACUUM TRAP W/SERR CONNECTION.

8759 VACUUM TRAP. 60 X 250MM VACUUM TRAP.

8758 DRY ICE TRAP, Twin. TWIN CHAMBERED TRAP.

8758 DRY ICE TRAP, Twin. TWIN CHAMBERED TRAP.

8757 DRY ICE TRAP. #15 24/40 DRY ICE TRAP C.

8757 DRY ICE TRAP. #15 24/40 DRY ICE TRAP.

8757 DRY ICE TRAP. 24/40 DRY ICE TRAP.

8756 DRY ICE CONDENSER / TRAP, with reservoir. COMPLETE DRY ICE CONDENSER / TRAP, ACE-SAFE CONNECTORS, PTFE STOPCOCK BOTTOM.

8756 DRY ICE CONDENSER / TRAP, with reservoir. DRY ICE CONDENSER / TRAP WITHOUT ACE-SAFE CONNECTORS, PTFE STOPCOCK BOTTOM.

8756 DRY ICE CONDENSER / TRAP, with reservoir. DRY ICE CONDENSER / TRAP, GLASS HOSE CONNECTIONS, PTFE STOPCOCK BOTTOM.

8753 VACUUM TRAP. 45/50 COMPLETE VACUUM TRAP, BENT VERTICAL TUBE.

8753 VACUUM TRAP. 45/50 22MMOD VACUUM TRAP INNER TUBE, BENT VERTICAL OUTLET.

8753 VACUUM TRAP. 40/50 COMPLETE VACUUM TRAP, BENT VERTICAL TUBE.

8753 VACUUM TRAP. 40/50 19MMOD VACUUM TRAP INNER TUBE, BENT VERTICAL OUTLET.

8753 VACUUM TRAP. 34/45 COMPLETE VACUUM TRAP, BENT VERTICAL TUBE.

8753 VACUUM TRAP. 34/45 16MMOD VACUUM TRAP INNER TUBE, BENT VERTICAL OUTLET.

8753 VACUUM TRAP. 29/42 COMPLETE VACUUM TRAP, BENT VERTICAL TUBE.

8753 VACUUM TRAP. 29/42 13MMOD VACUUM TRAP INNER TUBE, BENT VERTICAL OUTLET.

8753 VACUUM TRAP. 24/40 COMPLETE VACUUM TRAP, BENT VERTICAL TUBE.

8753 VACUUM TRAP. 24/40 10MMOD VACUUM TRAP INNER TUBE, BENT VERTICAL OUTLET.

8753 VACUUM TRAP. 45/50 COMPLETE VACUUM TRAP, STRAIGHT VERTICAL TUBE.

8753 VACUUM TRAP. 40/50 COMPLETE VACUUM TRAP, STRAIGHT VERTICAL TUBE.

8753 VACUUM TRAP. 45/50 22MMOD VACUUM TRAP INNER TUBE.

8753 VACUUM TRAP. 40/50 19MMOD VACUUM TRAP INNER TUBE.

8753 VACUUM TRAP. 45/50 VACUUM TRAP OUTER BODY.

8753 VACUUM TRAP. 40/50 VACUUM TRAP OUTER BODY.

8753 VACUUM TRAP. 34/45 COMPLETE VACUUM TRAP, STRAIGHT VERTICAL TUBE.

8753 VACUUM TRAP. 34/45 16MMOD VACUUM TRAP INNER TUBE.

8753 VACUUM TRAP. 34/45 VACUUM TRAP OUTER BODY.

8753 VACUUM TRAP. 29/42 COMPLETE VACUUM TRAP, STRAIGHT VERTICAL TUBE.

8753 VACUUM TRAP. 29/42 13MMOD VACUUM TRAP INNER TUBE.

8753 VACUUM TRAP. 29/42 VACUUM TRAP OUTER BODY.

8753 VACUUM TRAP. 24/40 COMPLETE VACUUM TRAP, STRAIGHT VERTICAL TUBE.

8753 VACUUM TRAP. 24/40 10MMOD VACUUM TRAP INNER TUBE.

8753 VACUUM TRAP. 24/40 VACUUM TRAP OUTER BODY.

8746 VACUUM TRAPS, Threaded Body. COMPLETE 38MMOD VACUUM TRAP, 14MMOD TUBE END SIDE ARM AND INNER TUBE.

8752 VACUUM TRAP, with Serrated Hose Connections. 25MM VACUUM TRAPS.

8751 VACUUM TRAP. 45MM DIAMETER VACUUM TRAP.

8750 VACUUM TRAP. 38MM DIAMETER VACUUM TRAP.

8750 VACUUM TRAP. 35MM DIAMETER VACUUM TRAP.

8751 VACUUM TRAP. 32MM DIAMETER VACUUM TRAP.

8751 VACUUM TRAP. 25MM DIAMETER VACUUM TRAP.

8750 VACUUM TRAP. 45MM DIAMETER VACUUM TRAP.

8751 VACUUM TRAP. 38MM DIAMETER VACUUM TRAP.

8751 VACUUM TRAP. 35MM DIAMETER VACUUM TRAP.

8750 VACUUM TRAP. 32MM DIAMETER VACUUM TRAP.

8750 VACUUM TRAP. 25MM DIAMETER VACUUM TRAP.

8749 VACUUM TRAP, Twin Chamber. VACUUM TRAP TWIN CHAMBER.

8748 DRY ICE CONDENSER-TRAP, with Ace-Threds. #11 TWIN TRAP THREAD STOPCOCK.

8748 DRY ICE CONDENSER-TRAP, with Ace-Threds. DRY ICE COND-TRAP.

8748 DRY ICE CONDENSER-TRAP, with Ace-Threds. DRY ICE COND-TRAP.

8748 DRY ICE CONDENSER-TRAP, with Ace-Threds. TWIN CHAMBER.

8748 DRY ICE CONDENSER-TRAP, with Ace-Threds. TWIN CHAMBER THREAD STOPCOCK.

8748 DRY ICE CONDENSER-TRAP, with Ace-Threds. #15 TWIN CHAMBER THREAD STOPCOCK.

8748 DRY ICE CONDENSER-TRAP, with Ace-Threds. DRY ICE FINGER CONDENSER.

8747 VACUUM TRAPS, Threaded, with Serrated Hose Connections. 60MM VACUUM TRAP.

8747 VACUUM TRAPS, Threaded, with Serrated Hose Connections. 60MM TEST TUBE VACUUM GAUGE.

8746 VACUUM TRAPS, Threaded Body. COMPLETE 51MMOD VACUUM TRAP, 14MMOD TUBE END SIDE ARM AND INNER TUBE.

8747 VACUUM TRAPS, Threaded, with Serrated Hose Connections. 51MM TEST TUBES VACUUM TRAPS.

8747 VACUUM TRAPS, Threaded, with Serrated Hose Connections. 51&60INNERTUBES VACUUM TRAPS.

8746 VACUUM TRAPS, Threaded Body. HOSE CONNECTION GLASS ADAPTER FOR 14MMOD TUBE, USE 7506-06 TO ATTACH.

8746 VACUUM TRAPS, Threaded Body. HOSE CONNECTION GLASS ADAPTER FOR 24MMOD TUBE, USE 7506-10 TO ATTACH.

8746 VACUUM TRAPS, Threaded Body. COMPLETE 90MMOD VACUUM TRAP, 15# THREADED SIDE ARM AND INNER TUBE.

8746 VACUUM TRAPS, Threaded Body. VACUUM TRAP GLASS BODY ONLY, 90MMOD X 350MM, 15# SIDE ARM.

8746 VACUUM TRAPS, Threaded Body. #15 THREADED, 24MMOD VACUUM TRAP INNER TUBE ONLY.

8746 VACUUM TRAPS, Threaded Body. COMPLETE 90MMOD VACUUM TRAP, 24MMOD TUBE END SIDE ARM AND INNER TUBE.

8746 VACUUM TRAPS, Threaded Body. 24MMOD VACUUM TRAP INNER TUBE ONLY.

8746 VACUUM TRAPS, Threaded Body. VACUUM TRAP GLASS BODY ONLY, 90MMOD X 350MM, 24MMOD SIDE ARM.

8746 VACUUM TRAPS, Threaded Body. COMPLETE 60MMOD VACUUM TRAP, #15 THREADED SIDE ARM AND INNER TUBE.

8746 VACUUM TRAPS, Threaded Body. VACUUM TRAP GLASS BODY ONLY, 60MMOD X 250MM, #15 SIDE ARM.

8746 VACUUM TRAPS, Threaded Body. COMPLETE 60MMOD VACUUM TRAP, 14MMOD TUBE END SIDE ARM AND INNER TUBE.

8746 VACUUM TRAPS, Threaded Body. COMPLETE 51MMOD VACUUM TRAP, #15 THREADED SIDE ARM AND INNER TUBE.

8746 VACUUM TRAPS, Threaded Body. VACUUM TRAP GLASS BODY ONLY, 60MMOD X 250MM, 14MMOD SIDE ARM.

8747 VACUUM TRAPS, Threaded, with Serrated Hose Connections. 51MM VACUUM TRAP.

8746 VACUUM TRAPS, Threaded Body. VACUUM TRAP GLASS BODY ONLY, 51MMOD X 250MM, #15 SIDE ARM.

8746 VACUUM TRAPS, Threaded Body. VACUUM TRAP GLASS BODY ONLY, 51MMOD X 250MM, 14MMOD SIDE ARM.

8746 VACUUM TRAPS, Threaded Body. COMPLETE 38MMOD VACUUM TRAP, #15 THREADED SIDE ARM AND INNER TUBE.

8752 VACUUM TRAP, with Serrated Hose Connections. 38MM VACUUM TRAP.

8746 VACUUM TRAPS, Threaded Body. VACUUM TRAP GLASS BODY ONLY, 38MMOD X 250MM, #15 SIDE ARM.

8746 VACUUM TRAPS, Threaded Body. VACUUM TRAP GLASS BODY ONLY, 38MMOD X 250MM, 14MMOD SIDE ARM.

8746 VACUUM TRAPS, Threaded Body. COMPLETE 32MMOD VACUUM TRAP, #15 THREADED SIDE ARM AND INNER TUBE.

8746 VACUUM TRAPS, Threaded Body. #15 THREADED, 14MMOD VACUUM TRAP INNER TUBE ONLY.

8746 VACUUM TRAPS, Threaded Body. COMPLETE 32MMOD VACUUM TRAP, 14MMOD TUBE END SIDE ARM AND INNER TUBE.

8746 VACUUM TRAPS, Threaded Body. VACUUM TRAP GLASS BODY ONLY, 32MMOD X 250MM, #15 SIDE ARM.

8746 VACUUM TRAPS, Threaded Body. 14MMOD VACUUM TRAP INNER TUBE ONLY.

8746 VACUUM TRAPS, Threaded Body. VACUUM TRAP GLASS BODY ONLY, 32MMOD X 250MM, 14MMOD SIDE ARM.

8744 VACUUM TRAPS, Threaded. 3000ML VACUUM TRAP 180 X 410MM W/#25 THREAD.

8744 VACUUM TRAPS, Threaded. 2000ML VACUUM TRAP 160 X 410MM W/#25 THREAD.

8744 VACUUM TRAPS, Threaded. 2-3L INNER TUBE ONLY.

8744 VACUUM TRAPS, Threaded. 3000ML VACUUM TRAP FLASK ONLY 180 X 410MM.

8744 VACUUM TRAPS, Threaded. 1000ML VACUUM TRAP 125 X 315MM W/#15 THREAD.

8744 VACUUM TRAPS, Threaded. 500ML VACUUM TRAP 100 X 235MM W/#15 THREAD.

8744 VACUUM TRAPS, Threaded. 2000ML VACUUM TRAP FLASK ONLY 160 X 410MM.

8744 VACUUM TRAPS, Threaded. 500ML-1L INNER TUBE ONLY.

8744 VACUUM TRAPS, Threaded. 1000ML VACUUM TRAP FLASK ONLY 125 X 315MM.

8744 VACUUM TRAPS, Threaded. 500ML VACUUM TRAP FLASK ONLY 100 X 235MM.

Vacuum Trap, Stopper Only. for CG-4532-01

Vacuum Trap, Body Only. 48mm OD x 300mm Length, 45/50 Outer Rodaviss Joint

Vacuum trap with 45/50 Rodaviss joint. Threaded joint provides a vacuum tight seal without grease. Serrated hose connections are 13.5mm at the smallest and 15.5mm at the largest serration. Supplied with stopper, lower body, Viton o-ring, loosening ring, and rodaviss cap.

Vacuum Trap, Stopper Only, #30 O-Ring Joint. Stopper only.

Vacuum Trap, Lower Body Only, #50 O-Ring Joint. Lower body only.

Vacuum Trap, Lower Body Only, #40 O-Ring Joint. Lower body only.

Vacuum Trap, Lower Body Only, #30 O-Ring Joint. Lower body only

Vacuum Trap, #50 O-Ring Joint. 58mm OD x 275mm L. O-ring joint provides a vacuum tight, grease free seal. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serration. Supplied with a stopper, lower body, viton o-ring, and s.s. pinch clamp.

Vacuum Trap, #40 O-Ring Joint. 45mm OD x 250mm L. O-ring joint provides a vacuum tight, grease free seal. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serration. Supplied with a stopper, lower body, viton o-ring, and s.s. pinch clamp.

Vacuum Trap, #30 O-Ring Joint. 30mm OD x 225mm L. O-ring joint provides a vacuum tight, grease free seal. Serrated hose connections are 13.5mm at the smallest serration and 15.5mm at the largest serration. Supplied with a stopper, lower body, viton o-ring, and s.s. pinch clamp.

5-Neck Reaction Vessel Lid. 150mm Schott Flange, CN 45/50, 3-SN 24/40 Vertical, 1-SN 24/40 Angled 10 deg. Four side necks are vertical and one neck has a 10 deg degree angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

5-Neck Reaction Vessel Lid. 150mm Schott Flange, CN 29/42, 3-SN 29/42 Vertical, 1-SN 29/42 Angled 10 deg. Four side necks are vertical and one neck has a 10 deg degree angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

5-Neck Reaction Vessel Lid. 150mm Schott Flange, CN 29/42, 3-SN 24/40 Vertical, 1-SN 24/40 Angled 10 deg. Four side necks are vertical and one neck has a 10 deg degree angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring

5-Neck Reaction Vessel Lid. 150mm Schott Flange, CN 24/40, 3-SN 24/40 Vertical, 1-SN 24/40 Angled 10 deg

5-Neck Reaction Vessel Lid. 100mm Schott Flange, CN 29/42, 3-SN 24/40 Vertical, 1-SN 24/40 Angled 10 deg. Four side necks are vertical and one neck has a 10 deg degree angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring

5-Neck Reaction Vessel Lid. 100mm Schott Flange, CN 24/40, 3-SN 24/40 Vertical, 1-SN 24/40 Angled 10 deg. Four side necks are vertical and one neck has a 10 deg degree angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring

PTFE Standard Taper Adapter. Extended Length, 29/42 Outer, 3/4 inch Male NPT, Center Neck

PTFE Standard Taper Adapter. 24/40 Outer, Center Neck, 1/2 inch Male NPT. Replacement for CG-1945-T-50.

5L Benchtop Reaction Vessel, Jacketed. 150mm Schott O-Ring Flange, 3/4 Beaded Pipe Inlet/Outlet, 1-1/5 Beaded Pipe Detachable Drain Valve. Jacketed reaction vessel with graduation scale on both sides.

4L Benchtop Reaction Vessel, Jacketed. 150mm Schott O-Ring Flange, 3/4 Beaded Pipe Inlet/Outlet, 1-1/4 Beaded Pipe Detachable Drain Valve. Jacketed reaction vessel with graduation scale on both sides.

3L Benchtop Reaction Vessel, Jacketed. 150mm Schott O-Ring Flange, 3/4 Beaded Pipe Inlet/Outlet, 1-1/3 Beaded Pipe Detachable Drain Valve. Jacketed reaction vessel with graduation scale on both sides.

2L Benchtop Reaction Vessel, Jacketed. 150mm Schott O-Ring Flange, 3/4 Beaded Pipe Inlet/Outlet, 1-1/2 Beaded Pipe Detachable Drain Valve. Jacketed reaction vessel with graduation scale on both sides.

500mL Benchtop Reaction Vessel. Jacketed, 80mm Schott O-Ring Flange, GL-14 Inlet/Outlet, CG-911-A-10 Drain Valve. Jacketed reaction vessel with graduation scale on both sides.

300mL Benchtop Reaction Vessel. Jacketed, 80mm Schott O-Ring Flange, GL-14 Inlet/Outlet, CG-911-A-10 Drain Valve. Jacketed reaction vessel with graduation scale on both sides.

200mL Benchtop Reaction Vessel, Jacketed. 80mm Schott O-Ring Flange, GL-14 Inlet/Outlet, CG-911-A-10 Drain Valve. Jacketed reaction vessel with graduation scale on both sides.

VACUUM TRAP. Replacement Components. 1000ml Stopper Only. Similar to CG-4529, but having a 40mm o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum-tight grease-free seal and permits the trap body to be easily disconnected from the stopper for cleaning.

VACUUM TRAP. Replacement Components. 500ml Stopper Only. Similar to CG-4529, but having a 40mm o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum-tight grease-free seal and permits the trap body to be easily disconnected from the stopper for cleaning.

VACUUM TRAP. Replacement Components. 1000ml Trap Body Only. Similar to CG-4529, but having a 40mm o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum-tight grease-free seal and permits the trap body to be easily disconnected from the stopper for cleaning.

VACUUM TRAP. Replacement Components. 500ml Trap Body Only. Similar to CG-4529, but having a 40mm o-ring joint to connect the trap body to the stopper. O-ring joint provides for a vacuum-tight grease-free seal and permits the trap body to be easily disconnected from the stopper for cleaning.

VACUUM TRAP. 1000ml. Overall HeightxWidth: 400x130. Fits Dewar Flask Size: 4300ml. Similar to CG-4529, but having a 40mm o-ring joint to connect the trap body to the stopper.

VACUUM TRAP. 500ml. Overall HeightxWidth: 360x130. Fits Dewar Flask Size: 1900ml. Similar to CG-4529, but having a 40mm o-ring joint to connect the trap body to the stopper.

VACUUM TRAP. Replacement Components. 500ml Trap Stopper Only. Trap is designed for high volume solvent removal by vacuum. The unique design of the stopper decreases the chance of freezing by allowing vapor to pass through the holes in the side of the inner tube.

VACUUM TRAP. Replacement Components. 500ml Trap Body Only. Trap is designed for high volume solvent removal by vacuum. The unique design of the stopper decreases the chance of freezing by allowing vapor to pass through the holes in the side of the inner tube.

VACUUM TRAP. 500ml. Overall HeightxWidth: 475x160mm. Trap is designed for high volume solvent removal by vacuum. The unique design of the stopper decreases the chance of freezing by allowing vapor to pass through the holes in the side of the inner tube.

VACUUM TRAP. Replacement Components. Stopper Only (fits both 500ml and 1000ml sizes). Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in. O.D.

VACUUM TRAP. Replacement Components. 1000ml Trap Body Only. Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in. O.D. Trap is designed to fit into standard CG-1593 through CG-1595 dewar flasks.

VACUUM TRAP. Replacement Components. 500ml Trap Body Only. Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in. O.D. Trap is designed to fit into standard CG-1593 through CG-1595 dewar flasks.

VACUUM TRAP. 1000ml. Overall HeightxWidth: 340x130mm. Fits Dewar Flask Size: 4300ml. Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in. O.D.

VACUUM TRAP. 500ml. Overall HeightxWidth: 310x130mm. Fits Dewar Flask Size: 1900ml. Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in. O.D.

VACUUM TRAP, REMOVABLE ARMS. Replacement Components. Trap Arm, Style 'C'. Vacuum trap features removable arms to permit the trap to be easily disconnected for cleaning. The arms are made to permit clamping directly to the lattice and accept 5/8in. I.D. vacuum hose.

VACUUM TRAP, REMOVABLE ARMS. Replacement Components. Trap Arm, Style 'B'. Vacuum trap features removable arms to permit the trap to be easily disconnected for cleaning. The arms are made to permit clamping directly to the lattice and accept 5/8in. I.D. vacuum hose.

VACUUM TRAP, REMOVABLE ARMS. Replacement Components. Trap Arm, Style 'A'. Vacuum trap features removable arms to permit the trap to be easily disconnected for cleaning. The arms are made to permit clamping directly to the lattice and accept 5/8in. I.D. vacuum hose.

VACUUM TRAP, REMOVABLE ARMS. Replacement Components. Vacuum Trap, Body Only. Vacuum trap features removable arms to permit the trap to be easily disconnected for cleaning. The arms are made to permit clamping directly to the lattice and accept 5/8in. I.D. vacuum hose.

Vacuum Trap, Removable Arms, Complete. Trap, arms have 35/25 spherical joints for added flexibility and leak-free seal. Includes one each of arm style GCAGCY (180[degree]), one each of arm style GCBGCY (90[degree]) and one each of arm style GCCGCY (straight), and two CG-150-06 #35 stainless steel pinchclamps

VACUUM TRAP, DUAL CHAMBER. Replacement Components. Dual Chamber Only. Dual chamber vacuum trap affords increased condensing capacity in a much shorter length. The dry ice cold fingers have 55/50 inner joints that fit into the outer joints on the main trap body and have a capacity of approx.

VACUUM TRAP, DUAL CHAMBER. Replacement Components. 55/50 Cold Finger Only. Dual chamber vacuum trap affords increased condensing capacity in a much shorter length. The dry ice cold fingers have 55/50 inner joints that fit into the outer joints on the main trap body and have a capacity of approx.

VACUUM TRAP, DUAL CHAMBER. Dual Chamber Trap, Complete. Dual chamber vacuum trap affords increased condensing capacity in a much shorter length. The dry ice cold fingers have 55/50 inner joints that fit into the outer joints on the main trap body and have a capacity of approx. 300ml each.

VACUUM TRAP, SOLVENT VAPOR, PLASTIC COATED. Replacement Components. UHMW Lid. Trap is designed for large volume solvent vapor removal during rotary evaporation. Trap is placed between the vacuum source and the rotary evaporator to prevent solvent vapors from entering the vacuum pump.

VACUUM TRAP, DEWAR TYPE. fluoropolymer resin Stopcock. Inner Chamber I.D.xDepth: 75x275mm; Overall HeightxWidth: 515x180mm. Lower Reservoir: 500ml. Dry ice, dewar style trap condenser designed for large volume solvent removal.

VACUUM TRAP, DEWAR TYPE. fluoropolymer resin Stopcock. Inner Chamber I.D.xDepth: 85x120mm; Overall HeightxWidth: 650x120mm. Lower Reservoir: 1000ml. Dry ice, dewar style trap condenser designed for large volume solvent removal.

VACUUM TRAP, JOINT. Replacement Components. Stopper for CG-4514-14, 55/50. Similar to CG-4514, but with the top inlet tube bent at a 90[degree] angle.

VACUUM TRAP, JOINT. Complete Trap. Body O.D.xLength: 60X300mm; O.D. of Side and Inner Tube: 30mm. Joint size: 55/50. Similar to CG-4514, but with the top inlet tube bent at a 90[degree] angle.

VACUUM TRAP, JOINT. Replacement Components. Stopper for CG-4514-10, 50/50. Similar to CG-4514, but with the top inlet tube bent at a 90[degree] angle.

VACUUM TRAP, JOINT. Complete Trap. Body O.D.xLength: 54X275mm; O.D. of Side and Inner Tube: 25mm. Joint size: 50/50. Similar to CG-4514, but with the top inlet tube bent at a 90[degree] angle.

VACUUM TRAP, JOINT. Replacement Components. Stopper for CG-4514-07, 40/50. Similar to CG-4514, but with the top inlet tube bent at a 90[degree] angle.

VACUUM TRAP, JOINT. Complete Trap. Body O.D.xLength: 45X250mm; O.D. of Side and Inner Tube: 16mm. Joint size: 40/50. Similar to CG-4514, but with the top inlet tube bent at a 90[degree] angle.

VACUUM TRAP, JOINT. Replacement Components. Stopper for CG-4514-04, 34/45. Similar to CG-4514, but with the top inlet tube bent at a 90[degree] angle.

VACUUM TRAP, JOINT. Complete Trap. Body O.D.xLength: 38X225mm; O.D. of Side and Inner Tube: 13mm. Joint size: 34/45. Similar to CG-4514, but with the top inlet tube bent at a 90[degree] angle.

VACUUM TRAP, JOINT. Replacement Components. Stopper for CG-4514-01, 29/42. Similar to CG-4514, but with the top inlet tube bent at a 90[degree] angle.

VACUUM TRAP, JOINT. Complete Trap. Body O.D.xLength: 32x200mm; O.D. of Side and Inner Tube: 10mm. Joint size: 29/42. Similar to CG-4514, but with the top inlet tube bent at a 90[degree] angle.

VACUUM TRAP, WITH SERRATED CONNECTIONS. Vacuum Trap Complete. Body O.D.xLength: 75x300mm; O.D. of Inner Tube: 30mm. Joint size: 71/60. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.

Vacuum Trap with Serrated Connections. Two-piece construction. Inlet and outlet are 180[degree] apart for installation. Stopper has standard taper inner joint; body has outer joint. Hose connections OD: 13mm (smallest serration); 16mm (largest serration). Body ODxLength: 60x300mm. Joint size: 55/50.

VACUUM TRAP, WITH SERRATED CONNECTIONS. Replacement Components. Body for CG-4515-21, 71/60. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.

VACUUM TRAP, WITH SERRATED CONNECTIONS. Replacement Components. Stopper for CG-4515-21, 71/60. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.

VACUUM TRAP, WITH SERRATED CONNECTIONS. Replacement Components. Body for CG-4515-20, 55/50. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.

VACUUM TRAP, WITH SERRATED CONNECTIONS. Replacement Components. Stopper for CG-4515-20, 55/50. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.

VACUUM TRAP, WITH SERRATED CONNECTIONS. Replacement Components. Stopper for CG-4515-04, 50/50. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.

VACUUM TRAP, WITH SERRATED CONNECTIONS. Replacement Components. Stopper for CG-4515-03, 40/50. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.

VACUUM TRAP, WITH SERRATED CONNECTIONS. Replacement Components. Stopper for CG-4515-02, 34/45. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.

VACUUM TRAP, WITH SERRATED CONNECTIONS. Replacement Components. Stopper for CG-4515-01, 29/42. Two piece construction for easy removal of condensate. Inlet and outlet are 180[degree] apart for installation into a variety of vacuum systems.

Vacuum Trap with Serrated Connections. Two-piece construction. Inlet and outlet are 180[degree] apart for installation. Stopper has standard taper inner joint; body has outer joint. Hose connections OD: 13mm (smallest serration); 16mm (largest serration). Body ODxLength: 54x275mm. Joint size: 50/50.

Vacuum Trap with Serrated Connections. Two-piece construction. Inlet and outlet are 180[degree] apart for installation. Stopper has standard taper inner joint; body has outer joint. Hose connections OD: 13mm (smallest serration); 16mm (largest serration). Body ODxLength: 45x250mm. Joint size: 40/50.

Vacuum Trap with Serrated Connections. Two-piece construction. Inlet and outlet are 180[degree] apart for installation. Stopper has standard taper inner joint; body has outer joint. Hose connections OD: 13mm (smallest serration); 16mm (largest serration). Body ODxLength: 38x225mm. Joint size: 34/45.

Vacuum Trap with Serrated Connections. Two-piece construction. Inlet and outlet are 180[degree] apart for installation. Stopper has standard taper inner joint; body has outer joint. Hose connections OD: 13mm (smallest serration); 16mm (largest serration). Body ODxLength: 32x200mm. Joint size: 29/42.

VACUUM TRAP, JOINT. Replacement Components. Body for CG-4514-14, 55/50. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Replacement Components. Stopper for CG-4514-14, 55/50. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Replacement Components. Body for CG-4514-10, 50/50. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Replacement Components. Stopper for CG-4514-10, 50/50. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Complete Trap. Body O.D.xLength: 54X275mm; O.D. of Side and Inner Tubes: 25mm. Joint size: 50/50. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Replacement Components. Body for CG-4514-07, 40/50. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Replacement Components. Stopper for CG-4514-07, 40/50. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Complete Trap. Body O.D.xLength: 45X250mm; O.D. of Side and Inner Tubes: 16mm. Joint size: 40/50. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Replacement Components. Body for CG-4514-04, 34/45. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Replacement Components. Stopper for CG-4514-04, 34/45. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Complete Trap. Body O.D.xLength: 38X225mm; O.D. of Side and Inner Tubes: 13mm. Joint size: 34/45. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Replacement Components. Body for CG-4514-01, 29/42. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Replacement Components. Stopper for CG-4514-01, 29/42. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP, JOINT. Complete Trap. Body O.D.xLength: 32x200mm; O.D. of Side and Inner Tubes: 10mm. Joint size: 29/42. Two piece vacuum trap connected with an inner and outer joint to facilitate cleaning.

VACUUM TRAP. Body O.D.xLength: 45x350mm; O.D. of Side and Inner Tubes: 25mm. Similar to CG-4510 but with top inlet tube bent at a 90[degree] angle.

VACUUM TRAP. Body O.D.xLength: 38x250mm; O.D. of Side and Inner Tubes: 25mm. Similar to CG-4510 but with top inlet tube bent at a 90[degree] angle.

VACUUM TRAP. Body O.D.xLength: 35x250mm; O.D. of Side and Inner Tubes: 16mm. Similar to CG-4510 but with top inlet tube bent at a 90[degree] angle.

VACUUM TRAP. Body O.D.xLength: 32x250mm; O.D. of Side and Inner Tubes: 13mm. Similar to CG-4510 but with top inlet tube bent at a 90[degree] angle.

VACUUM TRAP. Body O.D.xLength: 25x200mm; O.D. of Side and Inner Tubes: 10mm. Similar to CG-4510 but with top inlet tube bent at a 90[degree] angle.

VACUUM TRAP. Body O.D.xLength: 45x350mm; O.D. of Side and Inner Tubes: 25mm. One piece trap used in the removal of undesired vapors in the vacuum system by condensation.

VACUUM TRAP. Body O.D.xLength: 38x250mm; O.D. of Side and Inner Tubes: 25mm. One piece trap used in the removal of undesired vapors in the vacuum system by condensation.

VACUUM TRAP. Body O.D.xLength: 35x250mm; O.D. of Side and Inner Tubes: 16mm. One piece trap used in the removal of undesired vapors in the vacuum system by condensation.

VACUUM TRAP. Body O.D.xLength: 32x250mm; O.D. of Side and Inner Tubes: 13mm. One piece trap used in the removal of undesired vapors in the vacuum system by condensation.

VACUUM TRAP. Body O.D.xLength: 25x200mm; O.D. of Side and Inner Tubes: 10mm. One piece trap used in the removal of undesired vapors in the vacuum system by condensation.

VALVE RAPID PURGE AIRFREE. Replacement Components. fluoropolymer resin Plug, Float Control. An efficient purge valve that allows rapid 100% replacement of air in a manifold or reaction vessel with an inert gas such as nitrogen. Controls gas flow and pressure.

VACUUM GAUGE TRAP. Vacuum Gauge Trap. Trap provides protection of vacuum gauges from particulates which contaminate the mercury when the gauge is vented to the atmosphere. Supplied packed with glass wool. Hose connections have an O.D. of 9mm at the middle serration.

REACTION VESSEL LID, 5-NECK. Joint size: Center Neck: 45/50; Side Necks: 29/42. Flange I.D; 200mm. Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 5-NECK. Joint size: Center Neck: 45/50; Side Necks: 24/40. Flange I.D; 200mm. Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 5-NECK. Joint size: Center Neck: 45/50; Side Necks: 24/40. Flange I.D; 150mm. Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 5-NECK. Joint size: Center Neck: 29/42; Side Necks: 29/42. Flange I.D; 150mm. Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 5-NECK. Joint size: Center Neck: 29/42; Side Necks: 24/40. Flange I.D; 150mm. Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 5-NECK. Joint size: Center Neck: 24/40; Side Necks: 24/40. Flange I.D; 150mm. Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 4-NECK, THREADED CONNECTOR. Joint size: Center Neck: 45/50; Side Necks: 24/40. Flange I.D; 150mm. Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The #7 Chem-Thread will allow a thermometer or bleed tube having an O.D. of 4 to 7mm O.D.

REACTION VESSEL LID, 4-NECK, THREADED CONNECTOR. Joint size: Center Neck: 29/42; Side Necks: 29/42. Flange I.D; 150mm. Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The #7 Chem-Thread will allow a thermometer or bleed tube having an O.D. of 4 to 7mm O.D.

REACTION VESSEL LID, 4-NECK, THREADED CONNECTOR. Joint size: Center Neck: 29/42; Side Necks: 24/40. Flange I.D; 150mm. Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The #7 Chem-Thread will allow a thermometer or bleed tube having an O.D. of 4 to 7mm O.D.

REACTION VESSEL LID, 4-NECK, THREADED CONNECTOR. Joint size: Center Neck: 24/40; Side Necks: 24/40. Flange I.D; 150mm. Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The #7 Chem-Thread will allow a thermometer or bleed tube having an O.D. of 4 to 7mm O.D.

REACTION VESSEL LID, 4-NECK, THREADED CONNECTOR. Joint size: Center Neck: 24/40; Side Necks: 24/40. Flange I.D; 100mm. Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The #7 Chem-Thread will allow a thermometer or bleed tube having an O.D. of 4 to 7mm O.D.

REACTION VESSEL LID, FOUR NECK. Joint size: Center Neck: 24/40; Side Necks: 14/20. Flange I.D; 60mm. Four neck reaction vessel lid to fit CG-1930 through CG-1931 vessels. Side necks are on a 30[degree] angle. Lid has a flat ground surface allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 4-NECK, THERMOMETER JOINT. Joint size: Center Neck: 29/42; Side Necks: 29/42; Thermometer Joint: 10/30. Flange I.D; 150mm. Four neck vessel lid to fit CG-1920 through CG-1936 vessels.

REACTION VESSEL LID, 4-NECK, THERMOMETER JOINT. Joint size: Center Neck: 24/40; Side Necks: 24/40; Thermometer Joint: 10/30. Flange I.D; 150mm. Four neck vessel lid to fit CG-1920 through CG-1936 vessels.

REACTION VESSEL LID, 4-NECK, THERMOMETER JOINT. Joint size: Center Neck: 29/42; Side Necks: 24/40; Thermometer Joint: 10/30. Flange I.D; 100mm. Four neck vessel lid to fit CG-1920 through CG-1936 vessels.

REACTION VESSEL LID, 4-NECK, THERMOMETER JOINT. Joint size: Center Neck: 24/40; Side Necks: 24/40; Thermometer Joint: 10/30. Flange I.D; 100mm. Four neck vessel lid to fit CG-1920 through CG-1936 vessels.

REACTION VESSEL LID, 3-NECK. Joint size: Center Neck: 45/50; Side Necks: 45/50. Flange I.D; 200mm. Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface to allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 3-NECK. Joint size: Center Neck: 45/50; Side Necks: 24/40. Flange I.D; 200mm. Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface to allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 3-NECK. Joint size: Center Neck: 45/50; Side Necks: 24/40. Flange I.D; 150mm. Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface to allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 3-NECK. Joint size: Center Neck: 29/42; Side Necks: 29/42. Flange I.D; 150mm. Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface to allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 3-NECK. Joint size: Center Neck: 29/42; Side Necks: 24/40. Flange I.D; 150mm. Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface to allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 3-NECK. Joint size: Center Neck: 24/40; Side Necks: 24/40. Flange I.D; 150mm. Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface to allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 3-NECK. Joint size: Center Neck: 29/42; Side Necks: 24/40. Flange I.D; 100mm. Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface to allowing it to be greased or used with an o-ring.

REACTION VESSEL LID, 3-NECK. Joint size: Center Neck: 24/40; Side Necks: 24/40. Flange I.D; 100mm. Three neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface to allowing it to be greased or used with an o-ring.

REACTION VESSEL, SPHERICAL, MORTON TYPE. 22000ml. Flange I.D; 150mm; O.D.xH: 350x420mm. Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring.

REACTION VESSEL, SPHERICAL, MORTON TYPE. 12000ml. Flange I.D; 150mm; O.D.xH: 295x365mm. Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring.

REACTION VESSEL, SPHERICAL, MORTON TYPE. 5000ml. Flange I.D; 150mm; O.D.xH: 221x270mm. Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring.

REACTION VESSEL, SPHERICAL. 72000ml. Flange I.D; 200mm; O.D.xH: 520x590mm. Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, SPHERICAL. 50000ml. Flange I.D; 200mm; O.D.xH: 457x530mm. Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, SPHERICAL. 22000ml. Flange I.D; 150mm; O.D.xH: 350x420mm. Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, SPHERICAL. 12000ml. Flange I.D; 150mm; O.D.xH: 295x365mm. Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, SPHERICAL. 5000ml. Flange I.D; 150mm; O.D.xH: 221x270mm. Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, SPHERICAL. 3000ml. Flange I.D; 100mm; O.D.xH: 185x225mm. Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, SPHERICAL. 2000ml. Flange I.D; 100mm; O.D.xH: 161x200mm. Spherical shaped reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, CYLINDRICAL, JACKETED, DRAIN VALVE WITH MORTON INDENTATIONS. 250ml. Flange I.D; 60mm; Body I.D.xHeight: 60x110mm. Drain Valve Type: CG-511-01. Similar to CG-1928 but with Morton indentations to increase agitation during stirring.

REACTION VESSEL, JACKETED, DRAIN VALVE. 250ml. Flange I.D; 60mm; Body I.D.xH: 60x110mm. Drain Valve Type: CG-511-01. Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, JACKETED, DRAIN VALVE. 100ml. Flange I.D; 60mm; Body I.D.xH: 60x70mm. Drain Valve Type: CG-511-01. Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, JACKETED. 10000ml. Flange I.D; 200mm; Body I.D.xH: 200x435mm. Hose Conn. Thread Size: GL-18. Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, JACKETED. 4000ml. Flange I.D; 150mm; Body I.D.xH: 143x350mm. Hose Conn. Thread Size: GL-18. Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, JACKETED. 3000ml. Flange I.D; 150mm; Body I.D.xH: 143x275mm. Hose Conn. Thread Size: GL-14. Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, JACKETED. 2000ml. Flange I.D; 150mm; Body I.D.xH: 143x200mm. Hose Conn. Thread Size: GL-14. Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, JACKETED. 1000ml. Flange I.D; 100mm; Body I.D.xH: 97x205mm. Hose Conn. Thread Size: GL-14. Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, JACKETED. 500ml. Flange I.D; 100mm; Body I.D.xH: 97x130mm. Hose Conn. Thread Size: GL-14. Cylindrical, jacketed, reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, LOWER DRAIN VALVE. 4000ml. Flange I.D; 150mm; Body O.D.xH: 160x550mm. Drain Valve Size: 12. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, LOWER DRAIN VALVE. 2000ml. Flange I.D; 150mm; Body O.D.xH: 160x400mm. Drain Valve Size: 12. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, LOWER DRAIN VALVE. 1000ml. Flange I.D; 100mm; Body O.D.xH: 105x345mm. Drain Valve Size: 6. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, LOWER DRAIN VALVE. 500ml. Flange I.D; 100mm; Body O.D.xH: 105x270mm. Drain Valve Size: 6. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange.

REACTION VESSEL, CYLINDRICAL, MORTON TYPE. 4000ml. Flange I.D; 150mm; Body O.DxH: 160x355mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring.

REACTION VESSEL, CYLINDRICAL, MORTON TYPE. 2000ml. Flange I.D; 150mm; Body O.DxH: 160x205mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring.

REACTION VESSEL, CYLINDRICAL, MORTON TYPE. 1000ml. Flange I.D; 100mm; Body O.DxH: 105x210mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring.

REACTION VESSEL, CYLINDRICAL, MORTON TYPE. 500ml. Flange I.D; 100mm; Body O.DxH: 105x135mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Indentations increase agitation of the contents of the vessel during stirring.

REACTION VESSEL, CYLINDRICAL. 10000ml. Flange I.D; 200mm; Body O.DxH: 215x440mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, CYLINDRICAL. 4000ml. Flange I.D; 150mm; Body O.DxH: 160x355mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, CYLINDRICAL. 3000ml. Flange I.D; 150mm; Body O.DxH: 160x280mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, CYLINDRICAL. 2000ml. Flange I.D; 150mm; Body O.DxH: 160x205mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, CYLINDRICAL. 1000ml. Flange I.D; 100mm; Body O.DxH: 105x210mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, CYLINDRICAL. 500ml. Flange I.D; 100mm; Body O.DxH: 105x135mm. Cylindrical reaction vessel constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any of the lids CG-1940 through CG-1946.

REACTION VESSEL, CYLINDRICAL, JACKETED, DRAIN VALVE WITH MORTON INDENTATIONS. 100ml. Flange I.D; 60mm; Body I.D.xHeight: 60x70mm. Drain Valve Type: CG-511-01. Similar to CG-1928 but with Morton indentations to increase agitation during stirring.

TRAP, PUMP OIL, AIRFREE. Trap to Fit AF-0350-02-160 liter/min. pump. Designed to fit between the vacuum pump and the upper cart shelf on the AF-0300-01 cart to prevent oil from being drawn into the vacuum line. Offset inlet and outlet permits installation as illustrated.

VACUUM TRAP, AIRFREE. Replacement Components. Trap, Stopper Portion Only. Two piece trap is constructed using a 57mm O-ring flat flange. Lower trap body is 57mm O.D. x 300mm in length to be used with a 4300ml dewar flask (CG-1593-05 or CG-1594- 05).

DUAL VACUUM TRAP ASSEMBLY, O-RING, AIRFREE. Replacement Components. Main Trap Body Only (D). Dual trap assembly for use with AF-0060 or AF-0061 manifolds. Pre-trap (B) is 51mm O.D.

DUAL VACUUM TRAP ASSEMBLY, O-RING, AIRFREE. Replacement Components. Main Trap Stopper Assembly (C). Dual trap assembly for use with AF-0060 or AF-0061 manifolds. Pre-trap (B) is 51mm O.D.

DUAL VACUUM TRAP ASSEMBLY, O-RING, AIRFREE. Replacement Components. Pre-Trap Only (B). Dual trap assembly for use with AF-0060 or AF-0061 manifolds. Pre-trap (B) is 51mm O.D.

DUAL VACUUM TRAP ASSEMBLY, O-RING, AIRFREE. Replacement Components. Manifold Shut Off Adapter (A). Dual trap assembly for use with AF-0060 or AF-0061 manifolds. Pre-trap (B) is 51mm O.D.

DUAL VACUUM TRAP ASSEMBLY, O-RING, AIRFREE. Dual Trap Assembly, Complete. Dual trap assembly for use with AF-0060 or AF-0061 manifolds. Pre-trap (B) is 51mm O.D.

VACUUM TRAP, O-RING, AIRFREE. Replacement Components. Trap, Stopper Only. Two piece trap with #15 o-ring joints on both the inlet and outlet ports.

VACUUM TRAP, O-RING, AIRFREE. Replacement Components. Trap, Lower Body Only. Two piece trap with #15 o-ring joints on both the inlet and outlet ports.

VACUUM TRAP, SOLVENT VAPOR, PLASTIC COATED, CHEM-DRAIN VALVE. Vacuum Trap, Complete. Similar to CG-4519, but modified with a 6mm Chem-Drain valve for use under high vacuum applications. Waste solvent drains directly through the fluoropolymer resin plug, eliminating fragile drain tubes.

Vacuum Trap, Solvent Vapor, Plastic-Coated. For large volume solvent vapor removal during rotary evaporation. Place between vacuum source and rotary evaporator to prevent solvent vapors from entering pump. Plastic-coated to contain solvent in case of breakage. Complete with UHMW lid with handle.

Test tube red ring mark at 3mL. Test tube, red ring mark at 3mL, for securing the chimney tube to the bent tube, for Arsentic Limit Test apparatus, European Pharmocopeia

Bent tube with flat ground no 5 o-ring joint. Bent tube only, with flat ground no 5 o-ring joint, 1mm pulled tip, test tube and springs for securing the chimney tube to the bent tube, for European Pharmacopeia Arsenic Limit Test apparatus

Synthware Anti-Splash Adapters with Fritted Disc, Modified, Kemtech America - A464250, 250 ml

TRAP R-E A-S 24/40-14/20 250ML - A461250

Synthware Anti-Splash Adapters with Fritted Disc, Modified, Kemtech America - A462424, 100 ml

TRAP R-E A-S 24/40-14/20 100ML - A462414

Synthware Anti-Splash Adapters, Modified, Kemtech America - A604250, 250 ml

Synthware Anti-Splash Adapters, Modified, Kemtech America - A601250, 250 ml

Synthware Anti-Splash Adapters, Modified, Kemtech America - A602924, 100 ml

Synthware Anti-Splash Adapters, Modified, Kemtech America - A602914, 100 ml

Synthware Anti-Splash Adapters, Modified, Kemtech America - A602424, 100 ml

TRAP R-E A-S 24/40-19/22 100ML - A602419

Synthware Anti-Splash Adapters, Modified, Kemtech America - A602414, 100 ml

Synthware Anti-Splash Adapters with Fritted Disc, Kemtech America - A234250, 250 ml

TRAP R-E A-S 24/40-14/20 250ML - A231250

Synthware Anti-Splash Adapters with Fritted Disc, Kemtech America - A232424, 100 ml

Synthware Anti-Splash Adapters with Fritted Disc, Kemtech America - A232419, 100 ml

Synthware Anti-Splash Adapters with Fritted Disc, Kemtech America - A232414, 100 ml

Synthware Anti-Splash Adapters, Kemtech America - A288250, 250 ml

Synthware Anti-Splash Adapters, Kemtech America - A284250, 250 ml

Synthware Anti-Splash Adapters, Kemtech America - A289250, 250 ml

Synthware Anti-Splash Adapters, Kemtech America - A281250, 250 ml

Synthware Anti-Splash Adapters, Kemtech America - A282424, 100 ml

Synthware Anti-Splash Adapters, Kemtech America - A282419, 100 ml

Synthware Anti-Splash Adapters, Kemtech America - A282414, 100 ml

Synthware Distilling Trap Adapters, Kemtech America - A264100, 100 ml

Synthware Distilling Trap Adapters, Kemtech America - A262419, 100 ml

Synthware Distilling Trap Adapters, Kemtech America - A262414, 100 ml

Synthware Anti-Climb Adapters, Kemtech America - A279450, 250 ml

Synthware Anti-Climb Adapters, Kemtech America - A274250, 250 ml

Synthware Anti-Climb Adapters, Kemtech America - A272250, 250 ml

Synthware Anti-Climb Adapters, Kemtech America - A274100, 100 ml

Synthware Anti-Climb Adapters, Kemtech America - A272419, 100 ml

Synthware Anti-Climb Adapters, Kemtech America - A272414, 100 ml

Reaction Vessel Lid. 5-Neck lid has 45/50 center neck, three 45/50 side necks, and a 60mm angled flange for powder addition.

Reaction Vessel Lid, 4-Neck, 45/50 Center Neck, 3-45/50 Side Necks, 200mm Schott Flange. 4-neck vessel lid to fit Chemglass' CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring

Reaction Vessel Lid, 4-Neck, 45/50 Center Neck, 3-29/42 Side Necks, 200mm Schott Flange. 4-neck vessel lid to fit Chemglass' CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring

Reaction Vessel Lid, 4-Neck, 45/50 Center Neck, 3-24/40 Side Necks, 200mm Schott Flange. 4-neck vessel lid to fit Chemglass' CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring

Reaction Vessel Lid, 4-Neck, 45/50 Center Neck, 3-24/40 Side Necks, 150mm Schott Flange. 4-neck vessel lid to fit Chemglass' CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring

Reaction Vessel Lid, 4-Neck, 29/42 Center Neck, 3-29/42 Side Necks, 150mm Schott Flange. 4-neck vessel lid to fit Chemglass' CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring

Reaction Vessel Lid, 4-Neck, 29/42 Center Neck, 3-24/40 Side Necks, 150mm Schott Flange. 4-neck vessel lid to fit Chemglass' CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring

Reaction Vessel Lid, 4-Neck, 24/40 Center Neck, 3-24/40 Side Necks, 150mm Schott Flange. 4-neck vessel lid to fit Chemglass' CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring

Reaction Vessel Lid, 4-Neck, 29/42 Center Neck, 3-24/40 Side Necks, 100mm Schott Flange. 4-neck vessel lid to fit Chemglass' CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring

Reaction Vessel Lid, 4-Neck, 24/40 Center Neck, 3-24/40 Side Necks, 100mm Schott Flange. 4-neck vessel lid to fit Chemglass' CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring

4L Reaction Vessel, Cylindrical, Jacketed, Morton. Sidearm Lower Drain Valve, 150mm Schott O-Ring Flange, 143mm I.D. x 600mm Height. With Morton indentations to increase agitation during stirring. Inlcudes two polypropylene hose connections and two screw caps.

3L Reaction Vessel, Cylindrical, Jacketed, Morton. Sidearm Lower Drain Valve, 150mm Schott O-Ring Flange, 143mm I.D. x 525mm Height. With Morton indentations to increase agitation during stirring. Inlcudes two polypropylene hose connections and two screw caps.

2L Reaction Vessel, Cylindrical, Jacketed, Morton. Sidearm Lower Drain Valve, 150mm Schott O-Ring Flange, 143mm I.D. x 450mm Height. With Morton indentations to increase agitation during stirring. Inlcudes two polypropylene hose connections and two screw caps.

1L Reaction Vessel, Cylindrical, Jacketed, Morton. Sidearm Lower Drain Valve, 100mm Schott O-Ring Flange, 97mm I.D. x 395mm Height. With Morton indentations to increase agitation during stirring. Inlcudes two polypropylene hose connections and two screw caps.

500mL Reaction Vessel, Cylindrical, Jacketed, Morton. Sidearm Lower Drain Valve, 100mm Schott O-Ring Flange, 97mm I.D. x 320mm Height. With Morton indentations to increase agitation during stirring. Inlcudes two polypropylene hose connections and two screw caps.

Large Scale Jacketed Process Vessel. 15L.

Large Scale Jacketed Process Vessel. 10L.

4L Reaction Vessel, Cylindrical, Jacketed. Sidearm Lower Drain Valve, 150mm Duran O-Ring Flange, 143mm I.D.

3L Reaction Vessel, Cylindrical, Jacketed. Sidearm Lower Drain Valve, 150mm Duran O-Ring Flange, 143mm I.D.

2L Reaction Vessel, Cylindrical, Jacketed. Sidearm Lower Drain Valve, 150mm Duran O-Ring Flange, 143mm I.D.

1L Reaction Vessel, Cylindrical, Jacketed. Sidearm Lower Drain Valve, 100mm Duran O-Ring Flange, 97mm I.D.

500ml Reaction Vessel, Cylindrical, Jacketed. Sidearm Lower Drain Valve, 100mm Duran O-Ring Flange, 97mm I.D.

Category