• 0
Shop Products $

Safe-T-Zone Combination Safety Shower and Eye/Face Wash. With Stainless Steel Stanchion. Has stainless steel basin. Shower has 20.3cm diameter head with impeller action and stay-open valve. Six aerated outlets in each spray head provide 22.8x20.3cm curtain of aerated water. Meets ANSI Z358.1-1998 standard.

Broad Range Protein Molecular Weight Markers, 100 lanes, Promega - V8491, 100 lanes, Broad Range Protein Molecular Weight Markers, 100 lanes

MagnaBot Spacer 3/16 inch, Promega - V8381, 1 each, MagnaBot Spacer 3/16 inch, 1 each

Plate Stand, Promega - V8261, 1 each, Plate Stand, 1 each

The Deep Well MagnaBot 96 Magnetic Separation Device. Designed for high-throughput bioseparation using magnetic particles such as MagneSil Paramagnetic Particles for magnetic separation in deep-well plates as an alternative to vacuum filtration and centrifugation separation formats.

Accessories for GloMax® 20/20 Luminometer, Promega - E5391, 4 sets, GloMax 20/20 Replacement Valves, 4 sets

Accessories for GloMax® 20/20 Luminometer, Promega - E5371, 1 each, GloMax 20/20 Test Tube Holder (1.5ml Microcentrifuge Tubes), 1 each

Accessories for GloMax® 20/20 Luminometer, Promega - E5361, 1 each, GloMax 20/20 Fluorescent Module, Blue, 1 each

Accessories for GloMax® 20/20 Luminometer, Promega - E5351, 1 each, GloMax 20/20 Fluorescent Module, UV, 1 each

Distillation and Reactors Apparatus Monier-Williams Sulfites. (F), Bubbler Tube, [standard taper] 24/40 For the determination of free sulfite and a reproducible portion of the bound sulfites in food, such as the carbonyl addition products.

Distillation and Reactors Apparatus Monier-Williams Sulfites. (D), Flask Inlet Adapter, [standard taper] 24/40 For the determination of free sulfite and a reproducible portion of the bound sulfites in food, such as the carbonyl addition products.

Midi Vap Dist System Comp. Kimble chase midi-vap 4000 ammonia and phenol distillation system,complete,includes 10 sets of glassware,heater and pre-cut tubing,used for colorimetric determination of ammonia and phenol in environmental water and wastewater samples,1/case

QuickPrep3 Sample Holder Product Type: Instruments and Systems, Size: 24 x 2 ml.

SP MANUAL VALVE W/FLUEROELASTO - C33355000

Compression Fittings. For connecting vacuum flange joints to tubing. Compression fittings have threaded joint fitting with O-ring. ISO size: NW10. Tube connection 12.7mm OD.

12mm Vacuum Hose Nozzle. Use for connecting flexible 12.7mm I.D. vacuum tubing to vacuum pumping systems. Includes flange joint fitting. For ISO size: NW25.

Aluminum Elbow. ISO size NW25 aluminum elbow, 90[degree].

Clamping Ring. For ISO size: NW25. Preformed stainless steel vacuum clamp with a bolt and molded plastic thumbscrew. Clamp springs easily into position over the flange to hold joint together prior to clamping, allowing adjustment during assembly.

Centering Rings, Replacement O-Rings, and Clamping Rings, Edwards - C10514396, Centering Rings with Nitrile O-Ring

Clamping Ring. For ISO size: NW10/16. Preformed stainless steel vacuum clamp with a bolt and molded plastic thumbscrew. Clamp springs easily into position over the flange to hold vacuum joint together prior to clamping, allowing adjustment during assembly.

Centering Ring. For ISO size: NW10. Stainless steel centering ring supplied with nitrile O-ring. Length: 1.3cm.

EMF20 Outlet Oil Mist Filter. For removing oil vapors and odors from vacuum pump exhaust. Complete with NW10 or NW25 adapters and vacuum fittings for exhaust connection. For BOC Edwards pump models RV12 and E2M18.

EMF10 Outlet Oil Mist Filter. For removing oil vapors and odors from vacuum pump exhaust. Complete with NW10 or NW25 adapters and vacuum fittings for exhaust connection. For BOC Edwards pump models RV3, RV5 and RV8.

EMF3 Outlet Oil Mist Filter. For removing oil vapors and odors from vacuum pump exhaust. Complete with NW10 or NW25 adapters and vacuum fittings for exhaust connection. For BOC Edwards pump model E2M1.5.

Foreline Trap. Prevents back-migration of rotary pump oil vapor into the system. Use in two-stage pumps. Contains activated alumina, which has excellent oil vapor trapping properties. For models E2M1.5, RV3, RV5, RV8, RV12 and E2M18. A valved bypass line is recommended to minimize vapor adsorption.

WATER BATH PUMP - RX003100

MIDAS POWER SUPPLY ASSEMBLY WITH CNCTRS - RC11825

MIDAS EXTERNAL REGULATOR/HOSE - RB11952

MIDAS UP DOWN MOTOR ASSEMBLY - RB11851

Reducer, SS with Ferrules 1/4 to 1/8

Quick Connect SS QT-4-B-600

Quick Connect SS QT-2-B-400 Swagelok

Midas® III Automated Stainer, MilliporeSigma - 64000SM-94, Midas® Service Manual

Reflectoquant Empty Cells.

O-RING - 964911

O-RING ROTOR LID 90X4MM F/F0630/F1010 - 961923

O-RING ROTOR LID 126X4MM F/C0650/F0850 - 961922

O-RING 5.987 X .103W - 893502

FLOW CELL UNHEATED 10MM - 599925

Cell Holders, Beckman Coulter - 594439, Single Cell Holder, Unheated

CABLE SERD RS-232C CONEC SPEC-PC 9FT - 538613

Cell Holders, Beckman Coulter - 523415, Auto 6 Cell Holder, Water-Regulated Temperature Control

Cell Holders, Beckman Coulter - 523386, Micro-Auto 6 Cell Holder, Unheated

Cell Holders, Beckman Coulter - 523382, Single Cell Holder for 50 µl Microcell, Unheated

FILTER HOLMIUM OXIDE UV-VIS W-LEN/SPEC - 517698

Cell Holders, Beckman Coulter - 517151, Turbidity Cell Holder, Unheated

Cell Holders, Beckman Coulter - 517037, Rectangular Cell Holder, Unheated

Accessories for SX4750 and SX4750A Swinging Bucket Rotors, Beckman Coulter - 393074, Replacement Rotor Yoke for SX4750

Accessories for SX4750 and SX4750A Swinging Bucket Rotors, Beckman Coulter - 393073, Replacement Rotor Yoke for SX4750A

Microplates Carriages Pk2.

PAD RUBBER MCRPLT CARRIAGE PK4 - 392872

Microplate Canister Gaskets. Replacement gaskets for PTS-2000 Microplate Canisters (BK361301).

Rotor Wrench. Rotor wrench with T-handle grip. For use with Allegra 21 and 21R (BK367574, -570) centrifuge rotors.

Accessories for Avanti™ J-30I High-Performance Centrifuge, Beckman Coulter - 345366, Replacement O-ring, for Aerosolve® canister (ID×OD: 102×105.5 mm)

GasPak 100 O-Ring Gasket (Only). 1 gasket. Replacement part for GasPak 100 lids (BB4360411, BB60623, BB4360467, and BB4360637).

BLANK NUT STAINLESS STEEL FOR M4 PORT - 5067-6141, Blank nut, stainless steel, for M4 port

FRONT FERRULES 1/16IN GOLD 10/PK - 5005-0067

ICPMS PERIPUMP TUBE SOLVAF BLK/BLK 12/PK - 5005-0026

Replacement Plate Carriers. For Eppendorf plate rotor

EXP Trap Cartridge. 4.6mm x 5mm, HALO C18, 3/pk

EXP In-Line Holder. (Fittings Included, for use w/EXP Trap and Guard Cartridges)

EXP Titanium Hybrid Ferrule. 10/pk

Capillary zero flow 50um X 1m Coated, neutral, no flow 50um ID by 1meter. Use in Capillary Electrophoresis pack of 1

Cryo Box Stainless steel, square, 2mL (does not include 100 cell divider), For Use With CryoPlus 1,2,3,4

New Brunswick Premium Freezers Co2 Backup 120-230V 50/60Hz.

New Brunswick Innova Freezers Co2 Backup 120-230V 50Hz.

Replacement Air Filter. For 12.7, 17 And 20 Cu Ft (359.6L, 481.4, And 566.3L) Chests.

Replacement Air Filter For 3 Cu Ft (84.9L) Chests.

Rs-485, 0-5V Option.

Rs-485, 0-1V Option.

Rs-232, 0-1V Option.

XPert TXE Equipment Enclosure with Guardian 1000 Digital Airflow Monitor, 115V-60 HZ. The 42in interior height accommodates pill presses, grinders, crushers and sieves. Keeps powders contained. HEPA-filtered air is returned to the laboratory

Replacement HEPA and Inline Filter Kit for Symphony 6.5W.

Replacement screws (50) #10-24 x 3/8in. Pan head Phillips screws for mounting tube holders to platforms.

Diaphragm And Valveplate Replacement Parts Kit. For The N920_K_ Vacuum Pump Series and Sc920 Vacuum Systems.

Sapphire Injector, 2.0 mm i.d.. For the Optima 3000/XL/DV Demountable Torch.

Quartz Torch for Optima 3000 DV. Quartz Torch for Optima 3000 DV.

Replacement HEPA Exhaust Filter. for 6ft Purifier Logic Class II Cabinet and PuriCare Procedure Station.

Replacement Screws. (50) #10-24 X 5/16in Countersink Phillips Head Screws For Clips; (12) 1/4-20 X 3/4in Countersink Flat Head Socket Screws For Forma Model 440/441 And 490/491 Orbital Shaker Platforms.

GasPak 150 Large Anaerobic Lid, Inner with Large O-ring Gasket. 1 lid. Replacement part for GasPak 150 anaerobic systems (BB4360629 and BB4360628).

Opti-Max Cartridge Check Valves. Are Designed To Offer Maximum Performance And Ease Of Use. From The Sharp, Consistent Threads On Opti-Max Custom Housings, To The Exacting Standards Used To Match Ball/Seat Sets In Opti-Max Cartridges

Opti-Max Cartridge Check Valves. Are Designed To Offer Maximum Performance And Ease Of Use. From The Sharp, Consistent Threads On Opti-Max Custom Housings, To The Exacting Standards Used To Match Ball/Seat Sets In Opti-Max Cartridges

Suc-1 Invent Control Rack Canister.

Tubing Set, Titrator.

O-Rings, Kalrez®, Ace Glass Incorporated - 7855-623, -115

Sealing Kit.

O Ring Replacement 24x2mm.

Sliding Drawer Rack. Holds 42 Thermo Scientific Tube Boxes 3.365 Inch W x 5.03 Inch L x 1.4 Inch H, fits 300-700 5 Inner Door Freezers

Stakei Plug, Compatible with Refrigerated/Heating Circulator F25-HL, F32-HL, F33-HL, F95-SL, FP35-HL.

REG+EPROG Connector 6 pin. Copmatible with SE, HL, SL, CF31, CF41, and calibration baths in combination with analogoption 8900100. Presto A30/x40 in combination with analogoption 8900105. Semichiller with Pro Option 3.

Alarmplug 5 pole. AT HE, SE, HL, SL, CF41, CF41, SL-8K, SL-14K, FK30-SL, FK31-SL only in combination with analoguemodule 8900100. Semichiller SC with Pro Option 3.

Standby Connector 3 pin external input, for an external shutoff switch. For example. In combination with analogoption 8900100 excluding PrestoPlus, Magnum91, Forte HT. Semichiller with Pro Option 3.

External Pt100 connector for Semichillers with Pro Option 3, Compatible with Cryo-Compact Circulator and Refrigerated/Heating Circulator CF31, CF41, F25-HE, F25-HL, F26-ME.

Barbed fitting 2, for tubing 10mm inner diameter, Compatible with Cryo-Compact Circulator CF30, CF31, CF40, CF41, F25-HE.

O-Ring For Cuff 4Inch dia Silicon.

O-Ring For Armport Door.

Cuffs-Medium Size 7.

Cuffs-Small Size 7.

Gasket - Airlock Bac Ii, Iv .

Accessories for BRAND Transferpette® Single-Channel Electronic Pipettors, Variable Volume, Brand - 705500, Nickel metal hydrid battery for Transferpette® electronic

Accessories for BRAND seripettor® pro Bottle-Top Dispenser, Brand - 704551, Pump Assembly for 2 mL seripettor pro

Accessories for BRAND seripettor® pro Bottle-Top Dispenser, Brand - 704549, Pump Assembly for 25 mL seripettor pro

Accessories for BRAND seripettor® pro Bottle-Top Dispenser, Brand - 704548, Pump Assembly for 10 mL seripettor pro

Accessories for BRAND seripettor® Economy Bottle-Top Dispensers, Brand - 704544, Pump Assembly for 25 mL seripettor

Accessories for BRAND seripettor® Economy Bottle-Top Dispensers, Brand - 704542, Pump Assembly for 10 mL seripettor

Accessories for BRAND seripettor® Economy Bottle-Top Dispensers, Brand - 704541, Pump Assembly for 2 mL seripettor

Accessories for BRAND Transferpette® S Multichannel Pipettors, Brand - 703678, Fluorostatic Grease for Transferpette® Multichannels

Accessories for BRAND seripettor® Economy Bottle-Top Dispensers, Brand - 6794, Valve Block for 25 mL seripettor

Accessories for BRAND seripettor® Economy Bottle-Top Dispensers, Brand - 6792, Valve Block for 10 mL seripettor

BRAND QuikSipâ„¢ Bottletop Fluid Aspiration System - 6788, Seals for QuikSipâ„¢

FEET, (4), ES50L, ES100L, E S200L, MARINER FOR BALANCE.

Digestion Tube,300Ml.

Spare power cord for most IKA equipment.

ADAPTER 9x5ML F/A-4-38 RECT PK/2 (5702).

SD Card Ml300.

DTHP O-Ring Kit 5 Pack.

Thumb Screw 6-32 X 13-32.

Controller Cable Mini Din.

Cable Management System.

Air Service Fixture kit. Includes copper outlet tubing, brass valve, knob and hose connector. EA.

Tube 4 Watt 302Nm

Lamp Guard For B-100A

Lamp Visor For B-100A

O-Ring Kit, FETFE, Ace Glass Incorporated - 7855-799, FETFE O-Ring Kit

O-Ring Kit, Buna-N, Ace Glass Incorporated - 7855-499, Buna-N O-Ring Kit

O-Ring Kit, Mixed O-Rings, Ace Glass Incorporated - 7855-300, Mixed O-Ring Kit

O-Ring Kit, Viton, Ace Glass Incorporated - 7855-99, Viton O-Ring Kit

Eppendorf pivot grease. for use to lubricate the pivot joints on swing-bucket rotors, comes in a bottle of 20 mL

Replacement Hepa Filter For 6Feet Purifieri Horizontal Clean Benches, 48inch W X 30inch D X 3.08inch Thick.

Analyser Feed Pump 115V.

Plug Ctfe 1/4 28Thrd 10/Pk.

Interface Cable Ml500 6 Ft.

Rack, Multichannel Pipette.

Y-Connector 1/4-28 1/16In Bore.

Valve, Distribution, 8-Port.

Valve.3Mm Id Hvlx6-6.6-Port.

Inert Valve Hvx #D Hous/#5Plug.

Inert Valve Hvx #D3Hous/#5Plug.

Inert Valve Hvx #D2Hous/#5Plug.

Inert Valve Hvx #D1Hous/#5Plug.

Inert Valve Hvx #4Hous/#2 Plug.

Inert Value Hux #3Hous/#2 Plug.

Inert Valve Hvp #D3Hous/#5Plug.

Inert Valve Hvp #D2Hous/#5Plug.

Inert Valve Hvp #D1Hous/#5Plug.

Inert Valve Hvp #4 Hous/#3Plug.

Inert Valve Hvp #1 Hous/#1Plug.

Inert Valve Hv #D4 Hous/#5Plug.

Inert Valve Hv #D2 Hous/#5Plug.

Inert Valve Hv #4 Hous/#1 Plug.

Inert Valve,Hv,#4 Hous/# 3Plug.

Inert Valve Hv #4 Housing/Plug.

Inert Valve Hv #2 Housing/Plug.

Maxq 435/436/480/481 Hp Replacement Hepa Filter.

Diluter Valve(Ml503A,530B).

Hv Valve (Ml501A/Ml510B).

4.8V Spare Battery For Handle, Blue 1 per case. Nimh battery not subject to memory effect environment safe long autonomy allows 3000 cycles at full plunger travel fast charging ( 1.5 hours) conforms to energy star electrical requirements.

Exp Trap Cartridge, 4.6Mm X 5Mm, C4.68, 3/Pk.

Accessories for ELGA Water Purification Systems, ELGA LabWater - LC172, Carbon Filter, 20 IN.

Accessories for ELGA Water Purification Systems, ELGA LabWater - LA683, Filter Housing, 20 IN.

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LA681, Filter Bracket Assembly

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LC165, Residual Test 100

Accessories for ELGA Water Purification Systems, ELGA LabWater - LC173, Hydrophobic Microporous Vent Filter, Centra HF

ELGA Cartridges for Water Purification Systems - LC181, E- Cartridge Degasser Module

Accessories for ELGA Water Purification Systems, ELGA LabWater - LC180, Reverse Osmosis Membrane, 60 L/hr

Accessories for MEDICA® Pro 30R, 60R and 120R Water Systems for Clinical Analyzers, ELGA LabWater - LC179, High Flux Reverse Osmosis Membrane

ELGA Pre-Treatment Kits and Cartridges for Water Purification Systems - LC177, Pre-Treatment Cartridge for Protek L2

Accessories for MEDICA® Pro 30R, 60R and 120R Water Systems for Clinical Analyzers, ELGA LabWater - LC174, MEDPURE L1 Deionisation Cartridge

ELGA Cartridges for Water Purification Systems - LC293, Reverse Osmosis Module

Accessories for ELGA Water Purification Systems, ELGA LabWater - LC160, Replacement Filter, 0.2 µm

Accessories for ELGA Water Purification Systems, ELGA LabWater - LC159, Pre-treatment Filter

ELGA Lights for Water Purification Systems, ELGA LabWater - LC158, Replacement UV Lamp

ELGA Cleaners and Deionizers for Water Purification Systems, ELGA LabWater - LA682, Hygenic Sample (15 mm and 22 mm)

ELGA Cleaners and Deionizers for Water Purification Systems, ELGA LabWater - LA714, Hygenic Sample (8 mm and 10 mm)

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LA679, Centra High Recovery Kit

ELGA Pumps for Water Purification Systems, ELGA LabWater - LA696, Loop Booster Pump Module

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LA704, Caster Kit

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LA701, E-Cart Upgrade Kit

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LA722, Start Kit 2

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LA721, Start Kit 1

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LA728, By-Pass Pack

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LA665, Remote Display Centra

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LA703, 60 to 120 Upgrade Kit

ELGA Pressure Regulators for Water Purification Systems, ELGA LabWater - LA652, Inlet Pressure Regulator

ELGA Pressure Regulators for Water Purification Systems, ELGA LabWater - LA512, Feedwater Pressure Regulator

Dispensers for Water Purification Systems, ELGA LabWater - LA644, Integral Dispense Gun

Dispensers for Water Purification Systems, ELGA LabWater - LA643, Remote Dispense Station and Dispense Gun

Accessories for Water Purification Systems, ELGA LabWater - LA592-02, Wall Mounting Kit for 75 L Reservoir

Accessories for Water Purification Systems, ELGA LabWater - LA591-02, Wall Mounting Kit for 25/35/40 L Reservoir

ELGA PURELAB® Water System Technical Service and Support, ELGA LabWater - LA622, Wall Mounting Kit

Replacement Prefilters. For Use Purifier Logic, Purifier Cell Logic Biosafety Cabinets And Puricare laboratory research stations. washable, screen-type prefilters. For 3-ft purifier cabinets, order one each 3795301. for 5-ft purifier cabinets, order one each 3795301 and one each 3795300.

Replacement Prefilters. For Use Purifier Logic, Purifier Cell Logic Biosafety Cabinets And Puricare laboratory research stations. washable, screen-type prefilters. one each filter.

Ult Replacement Battery For All Revco Chest And Uprights Freezer.

Contact Module Sub-D, 3X Input, 3 X Output, 15 Pin Sub-D.

Rs232/485 Interface Module, Electrically Isolated, 9-Pin Sub-D Socket.

Analogue Interface Module, 2 X In, 2 X Out, Can Be Adjust From 0(4) To 20Ma Or 0 To 10V.

Accessories for TSX Ultra-Low Temperature Upright Freezers and Packages, (–80°C) –86 to –50°C, Thermo Scientific - RSK600SD4, Rack kit for 793 L (28 cu.ft.) ULT freezers; contains 1 shelf of sliding drawer racks (6 racks)

Omnispense Elite Peristaltic Dispensing Pump-Australia/ China Plug Style.

3-Door Gas Tight Screen. 3 interior glass doors for separate access for heracell 150 and 150i incubators (service installed)

Door Lock Retrofit Kit. Key entry, to prevent unauthorized access (requires service installation in field)

Pack Of 5 Spare Inlet Port Filters.

Rn Compression Fitting 1Mm.

Dual Rn Hub Coupler.

Rn Compression Fitting 1/16in.

Accessories for Rotavapor® R-100 and R-300 Rotary Evaporator, Büchi - 11056919, Bump Trap, 24/40 Joint Size

Clamp W/Spring Ret Lauber 2L. Clamp, 2l lauber w/spring retainer (fits 2l thompson flask)

10Ml Erlenmeyer Platform, For Innova 2000, C1/C2, E1/E2.

Utility Tray For Innova 2000, C1/C2, E1/E2.

Clamp W/Spring Retainer 500Ml. Media bottle clamp w/spring retainer 500ml

Scienceware Spring-Actuated Bag Holder and Carton Cover. Improves sanitation and safety of waste disposal. Lid prevents inadvertent contact with bag contents. Color-coded panel for easy identification. Autoclavable. Fits any carton with 12x12in opening. Cover Color: Orange.

Double-Tube Vacuum or Inert Gas Manifold, Ace Glass Incorporated - 8729-52, Double-Tube Manifold with Threaded Stopcocks

915MM X 14MM OD POROSITY B SPARGER TUBE, 0-5 EASY ACTION STOPCOCK TOP, 3/8 ID HOSE CONNECTION SIDE ARM.

GLASS DISINFECTANT TESTING CYLINDER, 8MMOD X 8MM HIGH.

GLASS DISINFECTANT TESTING CYLINDER, 10MMOD X 10MM HIGH.

13385 GAUGE, Pressure. 1/8-1/8NPT STAINLESS STEEL EXTENDER MALE TO MALE, 3 LONG.

PRESSURE TUBE 15ML13M30.5CM C#7. TUBE, PRESSURE, 15ML, 150psi, 13MMOD, 30.5CM LONG, COMPLETE WITH #7 FRONT-SEAL PLUG

PRESSURE TUBE 15ML25.4M10.2CM C#15. TUBE, PRESSURE, 15ML, 150psi, 25.4MMOD, 10.2CM LONG, COMPLETE WITH #15 BACK-SEAL PLUG

8066 BEARING, Trubore, PTFE, Ace-Thred, 10mm. 10MM BUSHING, GLASS FILLED PTFE.

8064 STIRRER ASSEMBLY, PTFE Blade. STIRRER ASSEMBLY, 45/50 BEARING, STAINLESS STEEL SHAFT, PTFE BLADE, FOR 5000-12000ML FLASKS.

8064 STIRRER ASSEMBLY, PTFE Blade. STIRRER ASSEMBLY, 29/42 BEARING, STAINLESS STEEL SHAFT, PTFE BLADE, FOR 500-1000ML FLASKS.

7859 O-rings, Chemraz 514. -212 CHEMRAZ O-RING.

7859 O-rings, Chemraz 514. -210 CHEMRAZ O-RING.

7859 O-rings, Chemraz 514. -115 CHEMRAZ O-RING.

7859 O-rings, Chemraz 514. -012 CHEMRAZ O-RING.

7855 O-RING. 3 CAPFE O-RING.

7855 O-RING. -125 CAPFE O-RINGS.

7855 O-RING. -115 CAPFE O-RINGS.

7855 O-RING. -016 O-RING FETFE.

7855 O-RING. -229 KALREZ O-RING (CTGJ).

7855 O-RING. -210 KALREZ O-RING.

7855 O-RING. -136 KALREZ O-RING (CTG).

7855 O-RING. -110 KALREZ O-RING.

7855 O-RING. -016 KALREZ O-RING (O).

7855 O-RING. -115 O-RING BUNA-N.

7855 O-RING. -212 O-RINGS VITON.

7855 O-RING. -016 O-RING SILICONE.

7855 O-RING. -015 O-RING SILICONE.

5857 ADAPTER, Chromatography Column End Fitting, with NPT. PTFE #80 TO 1/2 FEMALE NPT ADAPTER WITH SIZE 235 CAPFE O-RING, PERFORATED PLATE, RETAINING RING, 100 MICRON POLYETHYLENE FILTER, AND 350 MICRON POLYPROPYLENE FILTER.

5857 ADAPTER, Chromatography Column End Fitting, with NPT. PTFE RETAINING RING.

5846 PLUG, Nylon, HDPE or PTFE, Front seal. 36MM SOLID PTFE PLUG, 7855-772 FETFE O-RING FRONT SEAL.

5845 PLUG, Nylon, HDPE or PTFE, Back seal. 15MM SOLID PTFE PLUG, 7855-730 FETFE O-RING BACK SEAL.

5031 TWIN ADAPTER, Ace-Thred. TWIN ADAPTER, (2) #7 ACE-THRED TOP, 24/25 INNER BOTTOM.

Lower Body Assembly. 300ul lower body assembly replacement part for the Hamilton SoftGrip Pipettes.

OPTICHEMâ„¢ Blocks for Centrifugal Vacuum Evaporators, Chemglass - OP-6600-05, 24-Position, 1-Tier

Rxi-5ms Capillary GC Column. General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners. Ultra-low bleed, improved signal to noise ratio. Temperature range: -60C to 330/350C (bleed tested temperature/max operating temperature). 60m .32mm

Wall Bracket For Wall Mounted Telescopic Extractor

Ceiling Bracket Extractor. 10 In Inch Long Ceiling Bracket For Extractor Mounting

CONDENSER HOLDER CPL. FOR V C - 048180

Accessories for Rotavapor® R-100 and R-300 Rotary Evaporator, Büchi - 027462, Gasket, Complete (Gasket that goes between cold finger and outer cold trap condenser)

O-RING 2,7 - 023900

UV Blocking Cover Hinge. Hinge for UVP UV blocking covers. 2 required.

Electrode Insulator spare part for Parr Oxygen Combustion Bombs.

Reaction Bottle. 250 mL reaction bottle.

Graphite Gasket. Flexible graphite gasket for Parr 4575 High Temperature / High Pressure Bench Top Reactors.

Reducing Brushing. Reducing bushing, spare part.

Delrin Insulator. Delrin insulator, spare part.

Internal Bushing, #15. Solid, PTFE, #112 Viton O-Ring. New front seal PTFE bushing for use with CG-360 internal threads. Supplied complete with Viton O-ring.

O-Ring, #218 Perfluoro. One of the most thermally stable elastomeric materials available, Perfluoro offer a cost savings over similar o-rings such as KalrezGP- 4079 and ChemrazGP-. Perfluoro o-rings are stocked in WHITE 75 durometer.

O-Ring, #105 Perfluoro. One of the most thermally stable elastomeric materials available, Perfluoro offer a cost savings over similar o-rings such as KalrezGP- 4079 and ChemrazGP-. Perfluoro o-rings are stocked in WHITE 75 durometer.

O-Ring, #024. One of the most thermally stable elastomeric materials available, Perfluoro offer a cost savings over similar o-rings such as KalrezGP- 4079 and ChemrazGP-. Perfluoro o-rings are stocked in WHITE 75 durometer.

O-Ring, #019 Perfluoro. One of the most thermally stable elastomeric materials available, Perfluoro offer a cost savings over similar o-rings such as KalrezGP- 4079 and ChemrazGP-. Perfluoro o-rings are stocked in WHITE 75 durometer.

Perfluoro O-Ring, Size:331. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:226. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:223. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:222. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:217. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:214. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:212. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:208. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:205. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:204. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:137. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:136. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:121. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:120. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:117. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:116. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:115. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:114. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:108. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:107. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:022. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:018. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:014. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:007. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Perfluoro O-Ring, Size:006. Thermally stable elastomeric material. Designed to provide superior chemical resistance. Offer a cost savings over similar o-rings such as Kalrez- 4079 and Chemraz-. Stocked in WHITE 75 durometer. Effective service temperature is -7 to 230a C. Use with acids and etc.

Kalrez 4079 Perfluroelastomer, Size:229. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 229.

Kalrez 4079 Perfluroelastomer, Size:226. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 226.

Kalrez 4079 Perfluroelastomer, Size:223. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 223.

Kalrez 4079 Perfluroelastomer, Size:222. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 222.

Kalrez 4079 Perfluroelastomer, Size:217. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 217.

Kalrez 4079 Perfluroelastomer, Size:212. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 212.

Kalrez 4079 Perfluroelastomer, Size:210. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 210.

Kalrez 4079 Perfluroelastomer, Size:206. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 206.

Kalrez 4079 Perfluroelastomer, Size:205. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 205.

Kalrez 4079 Perfluroelastomer, Size:204. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 204.

Kalrez 4079 Perfluroelastomer, Size:128. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 128.

Kalrez 4079 Perfluroelastomer, Size:120. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 120.

Kalrez 4079 Perfluroelastomer, Size:118. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 118.

Kalrez 4079 Perfluroelastomer, Size:117. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 117.

Kalrez 4079 Perfluroelastomer, Size:116. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 116.

Kalrez 4079 Perfluroelastomer, Size:114. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 114.

Kalrez 4079 Perfluroelastomer, Size:112. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 112.

Kalrez 4079 Perfluroelastomer, Size:111. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 111.

Kalrez 4079 Perfluroelastomer, Size:110. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 110.

Kalrez 4079 Perfluroelastomer, Size:109. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 109.

Kalrez 4079 Perfluroelastomer, Size:108. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 108.

Kalrez 4079 Perfluroelastomer, Size:107. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 107.

Kalrez 4079 Perfluroelastomer, Size:014. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 014.

Kalrez 4079 Perfluroelastomer, Size:011. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 011.

Kalrez 4079 Perfluroelastomer, Size:010. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 010.

Kalrez 4079 Perfluroelastomer, Size:009. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 009.

Kalrez 4079 Perfluroelastomer, Size:008. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 008.

Kalrez 4079 Perfluroelastomer, Size:007. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 007.

Kalrez 4079 Perfluroelastomer, Size:006. Combines the elastomeric properties of Viton with the chemical resistance of PTFE, making it the best possible o-ring material available. Kalrez 4079 should be considered for service in high temperature, corrosive environments. Size 006.

Gasket. Sanitary Tri-Clamp Spore Trap Process Testing/Validation Gasket, 2inch, Platinum Silicone, FDA, USP Class VI

Accessories for Purifier® Vertical Clean Benches, Labconco - 3935702, Replacement Prefilter

Replacement Prefilter. For 0.9m models. An accessory for Purifier Vertical Clean Benches and Purifier Filtered PCR Enclosures.

Accessories for VWR Signatureâ„¢ High-Performance Horizontal Air Flow Ovens, Fan Motor, Shaft Up

Accessories. Accessories for Optimize Product Specifc Replacement Parts, Optimize Technologies - 10-10-02695, Optimize Seal Forming/Insertion Kit, Small/Medium/Large

FOOT PUMP (RUBBER/STAND.) - 9904203

SCREW ADJUSTMENT (PUMP) - 9904201

HOUSING NOSEPIECE - 9903803

RING RETAIN FOR NOSEPIECE - 9903802

McPherson Vannas Scissors, Sklar - 64-1961, McPherson Vannas Scissors

McPherson Vannas Scissors, Sklar - 64-1960, McPherson Vannas Scissors

XPert™ Filtered Balance Stations, Labconco® - 3940421

Guardian Digital Air Flow Monitor Kit. For Protector Premier hoods. Continuously checks face velocity. Alerts user to velocities below preset level. Has face plate with circuit board, electrical power pack, probe, vinyl tubing and wiring connections. 230V, 50/60Hz.

PVC Blower. for extremely corrosive fume hood atmospheres produced by high order oxidizers such as perchloric acid. Features: Unplasticized Housing Type I polyvinyl chloride, epoxy-coated base & weather cover, adjustable sheave, PVDF impeller, flow-through vent holes & louvers,gravity belt tightener

Filter. Replacement Supply HEPA filter

Replacement Exhaust HEPA filter. for use with Purfier Delta Series Class II, Type B2 Total Exhaust Safety Cabinets.

Replacement Exhaust/Supply Prefilter. 20 w x 20 d x 1 thick. Pleated Air Filter. One each. PuriCare Open Access Stations require two each Exhaust Prefilters. PuriCare Vertical Flow Stations require four each Exhaust/Supply Prefilters.

Cane Canister. Replacement for B-pure Cartridge systems.

Replacement Prefilter. Traps large particles to extend the life of the HEPA filter. Fits the 1.2m Purifier Horizontal Clean Bench. Shipping weight: 0.5kg.

Replacement Supply Prefilter. 45.7Wx45.7Dx2.5 thick cm pleated air filter. Traps large particles to extend the life of the HEPA filter. Fits the 0.9m Purifier horizontal clean bench (requires two) and PuriCare open access station (requires two). Shipping weight: 0.5kg.

Thermocouple Assembly Type K.

Thermocouple Assembly.

Relay Solid State 240V 25A.

Control Temperature Single Set Point For Furnace.

BELT CLEAR ENDLESS MODULAR - I052737

Accessories for VD Series Vacuum Drying Ovens, Binder - 8012-0405, Interface Converter RS 422 Cable Set, 120 V

FILTER ADAPTER, NEOPRENE. Size 6. Height: 40mm. I.D. Top/Bottom: 60x36mm. O.D. Top/Bottom: 69x45mm. Wall Thickness: 4.5. Neoprene filter adapters are designed to fit between the filtering funnel and flask. For use with Buchner funnels, Grooch crucibles, filter tubes etc.

POWER SUPPLY WITH PLUG-IN AC ADAPTOR SET - YEPS01-PS4

POWER SUPPLY - 69Y03294

CABLE USB (MINI 1M) - 69Y03293

ALKYNYL-DT-PHOSPHORAMIDITE. - 6214

ANTIBODY LABELING KIT RAPID XFD750 3MG - 5745

ANTIBODY LABELING KIT RAPID XFD647 3MG - 5740

STYRAMIDE GREEN 620 MFLUOR - 45075

SUCCINIMIDYL ESTERPSORALEN MOP 5MG - 39055

RHOD-4 ALKYNE 100UG - 21126

STAND UNDER-BENCH F GALAXY 48R - 6705070120

STACKING FRAME MID/UPPER F 48R - 6705070111

STACKING STAND LOWER F 48R W CASTERS - 6705070103

SHELF SET 2PCS PERFORATED F 170R/S - 6710859009

Valco 10-32 Stainless Steel Nuts and Ferrules. For 1.6mm tubing.

Optimize Fittings, Optimize Technologies - 40-24-01276, Parker Style Nuts & Ferrules (40-24-01275 & 40-24-01291)

OPTI-MAX Outlet Check Valve. For Hitachi 655, L-600, 6000, L-6200/L-6200A (LaChrom). Stainless steel.

OPTI-MAX Inlet Check Valve. For Hitachi 655, L-600, 6000, L-6200/L-6200A (LaChrom). Stainless steel.

OPTI-MAX Outlet Check Valve. For HP/Agilent 1050, 1100. Stainless steel.

ITB PTFE Piston Seal. For use with Hewlett-Packard HPLC systems, models 1050, 1100. Pack of 10.

Sapphire Plunger. HPLC component for Hewlett-Packard Model 1100/1050.

Accessories for OPTI-SOLV Biocompatible Solvent Reservoir Filter, Optimize Technologies - 10-13-00168, 1/16 IN. OD x .006 IN. ID x 10' L (PEEK) Tubing

OPTI-SOLV In-Line Filters and Components, Optimize Technologies - 10-04-00391, OPTI-SOLV In-Line Kit, Includes Hand-Tight PEEK Holder, Fittings & 2 Filter Elements

OPTI-SOLV In-Line Filters and Components, Optimize Technologies - 10-04-00390, OPTI-SOLV In-Line Kit, Includes Wrench-Tight SS Hex Holder, Fittings & 2 Filter Elements

OPTI-SOLV In-Line Filters and Components, Optimize Technologies - 10-04-00386, OPTI-SOLV In-Line Kit, Includes Hand-Tight PEEK Holder, Fittings & 2 Filter Elements

OPTI-SOLV In-Line Filters and Components, Optimize Technologies - 10-04-00383, OPTI-SOLV In-Line Kit, Includes Wrench-Tight SS Hex Holder, Fittings & 2 Filter Elements

Replacement Frit. An accessory for OPTI-SOLV In-Line Solvent Filter. Size: 2um.

Accessories for OPTI-SOLV In-Line Filters and Components, Optimize Technologies - 10-04-00100, Replacement Filter Elements (Frits) with .187 IN. filter dia. and 0.5 µm

CLEAR HEAT SEAL FILM RL 500MX78MM CS1 - 4TI-0540

CAMERA BASED READER FOR SINGLE TUBES 1EA - FLX-20-1003

Replacement Parts for 6803 Large Stainless Steel Vial Set, SPEX SamplePrep - 6803S, 6803S replacement O-rings for large grinding vial set 6803, fluorinated silicone

Accessories for Jenway 6850 Double-Beam Spectrophotometer with Variable Bandwidth, Antylia Scientific - 99956-15, Jenway 6850 Tungsten-halogen lamp

HOLDER TEST TUBE FOR LAMBDA 365 - N4101018

Accessories for VACUUBRAND® VACUU•PURE® Oil-Free Vacuum Pumps, BrandTech - 20635722, Chemically resistant internal centering ring KF 20/25

Accessories for CO2 Incubators with Hot Air Sterilization, Series CB, CB-S, VD, VDL, Binder - 9051-0040, Stacking frame

Logic® Vue Class II Enclosure Accessories, Labconco Corporation - 3349800, Logic® Vue airflow sensor

Accessories for Magnetic Hotplate Stirrers, AREX Digital PRO, AREX-6 Digital PRO, AREC.X Digital, VELP Scientifica - A00000280, Clamp for the PT100

CABLE PROBE EXTENSION 1 M LENGTH - A00000002

VACUUM CONTROL VALVE PACKAGE DIGITAL - 0020004893

VACUUM CONTROL VALVE PACKAGE MANUAL - 0020004850

Accessories for MACROMANâ„¢ Pipette Controller, Gilson - F107210, Adjustable Side Stand for MACROMAN

TEMPERATURE ADJUSTMENT SET F/MA35/37/160 - YTM15MA

TEMPERATURE ADJUSTMENT SET W/CERTIFICATE - YTM05MA

PLUG-IN AC ADAPTOR SET US/JP EU / UK - YEPS01-PS1

POWER SUPPLY WITHOUT PLUG-IN AC ADAPTORS - YEPS01-15V0

DOOR LOCK LOCKABLE HANDLE FOR FED 720 - 8012-1819

HEAD-PLATE ASSEMBLY STAND FOR BIOREACTOR - CLS-1380-100

Blade Replacement Stainless Steel Large. Replacement Blade, Stainless steel blade holder mounted on plastic covered stainless steel handle and is fully autoclavable, Size: Large

Heating Blanket 230V-15L 750Watt 2Latch. Heating Blanket 230V-15L 750 Watt, Used with a temperature controller and rtd temperature sensor for heating media inside a vessel to temperature, Male iec connector, 2 latch, 6ft Cord (18-2) With CJ14 Plug, Heating at 5 watts/sq.in, Dimension: 3 X 26.5in

Filter Replc N-St 0.8Um Hydrophobic CS5. Replacement Filter, Non-sterile, for use with Drummond tissue culture nosepiece only, 0.8um hydrophobic

Cassette Embedding W/Lid White CS750. PrintMate Embedding Cassettes, Separate lids included, Closure Type: Reversible, Color: White, Pore Style: Round holes, designed for superior ease of use and print clarity. For use with routine specimens, 10 tubes of 75 cassettes

Replacement Sparger Tip, 100 Micron Frit, For Air Aeration Tubes for Bioreactors.

Replacement Sparger Tip, 50 Micron Frit, For Air Aeration Tubes for Bioreactors.

Service Kit: Battery.

Megafuge St4R Plus-Md 120V Tx-1000Bt.

Stacking Kit F/Safe Stacking Of 200/200R. Stacking kit, for safe stacking of two HettCube 200 or 200 R models on top of each other

TUBING SANI-TECH STHT-R SILICONE 1 IN ID - STHT-R-1000

Small Water Separator, For Flame Photometers.

Air Safety Valves, Zoro - SF50-1A150, Air Safety Valve, with 1/2 IN. Inlet

Air Safety Valves, Zoro - ST25-1A125, Air Safety Valve, with 1/4 IN. Inlet

Router Diamond Cut, Zoro - RDB-30, Router Bit

Router Bit, Zoro - 04-110

Router Bit, Zoro - 12-110

Router Bit, Zoro - 12-130

Silicone Gaskets, Garlock Hygienic Technologies - A80RXPX-150-GAS, 1.5 IN., Gaskets

Gaskets, Garlock Hygienic Technologies - A80MPE-150-GAS, Gasket With Stainless Steel Plate

Orifice Plate Gasket, Garlock Hygienic Technologies - A80MPSFY-150-GAS, 1 1/2 IN., FKM Gasket With Stainless Steel Plate

Speedaire Coupler Body Plugs, Zoro - 30E707, Coupler Plug, Male NPT

Pin Gages, Plus, Class ZZ, Zoro - 111124000

Pin Gages, Plus, Class ZZ, Zoro - 111118000

Pin Gages, Plus, Class ZZ, Zoro - 111122700

Fittings, Holland Applied Technologies - HBFIT-134126, Disc Bottle HoseBarb Fitting

Drill Bits, Sid Tool . Drill Bits, Sid Tool Co - 56477680, Closed Circuit Liquid Level Sight Gauge, 4 1/2 IN.

Omega Pro Drive Ratchet Adapters, Zoro - 83010, 1/2 IN. Ø, Drive Ratchet Adapter

Silicone Sanitary Mini Gaskets, Garlock Hygienic Technologies - 42RXPX-0375, Mini Gasket, 3/8 IN.

Silicone Sanitary Gaskets, Garlock Hygienic Technologies - 42RXPX-W-075, White Silicone Gasket, 3/4 IN.

Clamps, Holland Applied Technologies - 13MHHM-0.75, Clamp, Triclover

Hose Assemblies, Holland Applied Technologies - 08-TS-11U11U-S, 1/2 IN. Hose Assemblies with 3/4 IN. Mini Tri-Clamp

SCREW REPLACEMENT WITH END CAPS 3/PK - 37617

Saunders® Aseptic Diaphragm Valves, Holland Applied Technologies - 0.500-EX, 1/2 IN., Endurance Modified PTFE/Silicone Two-Way Valve

Envelope Clamp Gaskets, Garlock Hygienic Technologies - A40MPGR-TF-400-E, Envelope clamp gasket

Envelope Gaskets, Garlock Hygienic Technologies - A40MPGR-200-V, 2.0 IN., Envelope gasket

Envelope Gaskets, Garlock Hygienic Technologies - A40MPGR-100-V, 1.0 IN., Envelope gasket

Envelope Gaskets, Garlock Hygienic Technologies - A40MPGR-150-V, 1.5 IN., Envelope gasket

Orifice Plate, Garlock - A80MPE-050-.125, Orifice Plate, 1/8 IN.

Replaceable Fiber Tipped Tweezers, Lindstrom Precision Tools - 259CFR-SA, Fiber Tipped Tweezer

Saunders® Aseptic Diaphragm Valves, Holland Applied Technologies - 1.500-S5, 1 1/2 IN., PTFE / EPM Backed Two-Way Valve

Saunders® Aseptic Diaphragm Valves, Holland Applied Technologies - 0.750-SR, 3/4 IN., PTFE / EPM Backed Two-Way Valve

Hose Assemblies, Holland Applied Technologies - 8TS11U11US6-72, Hose Assembly, Teflon-Lined Braided Stainless Steel Cover, With 3/4 IN. Mini Sanitary End Connections

Hose Assemblies, Holland Applied Technologies - 8TS11U11US6-48, Hose Assembly, Teflon-Lined Braided, Stainless Steel Cover, With 3/4 IN. Mini Sanitary End Connections

Hose Assemblies, Holland Applied Technologies - 6TS0808S6-48, Hose Assembly, Teflon-Lined Braided SS Cover, With 3/8 IN. MNPT End Connections

Pure-Fitâ„¢ Braid Reinforced Silicone Tubing, Holland Applied Technologies - HOSSBP-08

Pure-Fitâ„¢ Braid Reinforced Silicone Tubing, Holland Applied Technologies - HOSSBP-06

Sani-Tech® Concentric Reducer, Holland Applied Technologies - TAD200-075, 3/4 IN., Reducer, MINI × 2

Sanitary Gasket Clamps, Garlock Hygienic Technologies - 40RXPX-200, Sanitary Gasket Clamp, U.S. Pharmaceutical Class VI Compounds, Clear, 2 IN.

Clamp Gaskets, Flanged, Garlock Hygienic Technologies - 40MPFSFY-400, Flanged Clamp Gasket, FKM, 4 IN.

Clamp Gaskets, Flanged, Garlock Hygienic Technologies - 40MPFSFY-300, Flanged Clamp Gasket, FKM, 3 IN.

Clamp Gaskets, Garlock Hygienic Technologies - 40MPSFY-250, Standard Clamp Gasket, 2.5 IN.

Clamp Gaskets, Garlock Hygienic Technologies - 42MPSFY-050, Mini Clamp Gasket, 0.5 IN.

Sanitary Gasket Clamps, Garlock Hygienic Technologies - A40MPGR-100-V, Standard Sanitary Gasket Clamp, Viton Insert, 1 IN.

Sanitary Gasket Clamps, Garlock Hygienic Technologies - 40MPU-200, Standard Sanitary Gasket Clamp, Black, 2 IN.

Sanitary Gasket Clamps, Garlock Hygienic Technologies - 40MPU-100, Standard Sanitary Gasket Clamp, Black, 1 IN.

Sanitary Gasket Clamps, Garlock Hygienic Technologies - 42MPU-.50, Standard Sanitary Gasket Clamp, Black, 1/2 IN.

Sani-Tech® Tri-Clamp NPT Adapters, Holland Applied Technologies - KAD150-20M, 1 1/2 IN., Sani-Tech® Tri-Clamp × NPT Adapter

Adapters, Holland Applied Technologies - TAD150-12H, Adapter, PP, 3/4 IN. Hose Barb×1.5 IN.

Liquid Filled Gauges, Holland Applied Technologies - EL071010041111

Adapters, Holland Applied Technologies - TAD150-08H, Adapter, 1/2 IN. Hose Barb×1.5 IN. Sanitary

Gauges, Holland Applied Technologies - PS400-36, Gauge, Polysulfone

End Caps, Holland Applied Technologies - LXE-400, 4 IN., End cap, LXE-400

Adapters, Holland Applied Technologies - KAD100L-100, Adapter, PVDF, 1 IN. Ladish× Maxi Concentric Reducer

Pure-Fitâ„¢ Braid Reinforced Silicone Tubing, Holland Applied Technologies - HOSSBP-04

Sanitary Gasket Clamps, Garlock Hygienic Technologies - 40MPE-150, Gasket, 1 1/2 IN.

Liquid Filled Gauges, Holland Applied Technologies - EL069010041111

Silicone Braided Hose Assemblies, Holland Applied Technologies - A06STHT11116-2, 1/2 IN. Hose Assembly with 3/4 IN. Mini Tri-Clamp

Silicone Sanitary Mini Gaskets, Garlock Hygienic Technologies - 42RXPX-075, Mini Gasket, 3/4 IN.

Sanitary Gasket Clamps, Garlock Hygienic Technologies - 42MPSFY-075, Gasket, 3/4 IN.

Envelope Clamp Gaskets, Garlock Hygienic Technologies - A42MPGR-TF-075-E, Mini envelope clamp gasket

Tri-Clamp Gasket Clamps, Garlock Hygienic Technologies - 42MPG-050, Tri-Clamp® Gasket

Sanitary Screen Gaskets, Garlock Hygienic Technologies - 40RXPXS150-50SS, Screen Gasket, 100 Mesh SS Screen

Sanitary Screen Gaskets, Garlock Hygienic Technologies - 40RXPXS150-30SS, Screen Gasket, 30 Mesh SS Screen

Silicone Sanitary Gaskets, Garlock Hygienic Technologies - 40RXPX-F-200, Flanged Silicone Gasket, 2 IN.

Silicone Sanitary Gaskets, Garlock Hygienic Technologies - 40RXPX-150, Standard Clamp Gasket, Platinum Cured, Clear, 1.5 IN.

Sanitary Tri-Clamp® Standard Gaskets, Garlock Hygienic Technologies - 40MPU-150, 1 - 1/2 IN.

Tuf-Steel® Sanitary Tri-Clamp® Type 1 Standard Gasket, Garlock Hygienic Technologies - 40MPG-TS-100, 1''

Sanitary Tri-Clamp® Standard Gaskets, Garlock Hygienic Technologies - 40MPG-150, 1 - 1/2 IN.

Sanitary Tri-Clamp® Standard Gaskets, Garlock Hygienic Technologies - 40MPG-100, 1 IN.

Sanitary Gaskets, Garlock Hygienic Technologies - 40MPES150-10SS, Gasket Screen, 10 Mesh

Gasket Clamp EDPM, Garlock Hygienic Technologies - 40MPE-400, 4 IN., Clamp Gasket, Type 1 Standard

Gasket Clamp EDPM, Garlock Hygienic Technologies - 40MPE-100, 1 IN., Clamp Gasket, Type 1 Standard

Hose Assemblies, Holland Applied Technologies - 16WCS0308S6-72, Hose Assembly, Teflon Braided, Stainless Steel, 1 IN.

End Cap Clamp, Holland Applied Technologies - EG16A-6L.75, 3/4 IN., End Cap Clamp

Sealing ring for Dispensette valve block (PTFE). Sealing ring for Dispensette valve block (PTFE) for Dispensette S and Dispensette S Organic, Used to reduce leakage of vapors from rotating valve block. Recommended for use with concentrated nitric acid or concentrated hydrochloric acid

VWR O-ring, 1x5, For 100ul Single channel pipette.

FlashPure EcoFlex Silica catridge 4g. FlashPure EcoFlex Silica catridge, Particle shape: Irregular, Particle size: 40-63um, Pore size: 55-75A, Surface area: 470-530m2/g, Max.Pressure: 300psi / 20bar, Default flowrate: 15 mL/min, Loading capacity: 4mg-0.4g, Column volume: 6 mL, weight: 4g

FlashPure Empty Solid Loader, weight:120g, incl. Frits.

FlashPure Empty Solid Loader,weight: 80g including frits.

End Plug Mid-Size Stainless Steel. Replacement End Plug Mid-Size Stainless Steel, for Mid-Size Grinding Vial Set, Withstands liquid nitrogen temperatures, Autoclavable and reusable, Made of 440C stainless steel

Poly-Vial Set Small 0.5 mL - 4mL. Poly-Vial Set Small, Ideal for grinding soft plant and animal tissues and eliminates metal contamination, Withstands liquid nitrogen temperatures, Polycarbonate center cylinder Transparent plastic, RNase/DNase-free, Samp

JIMMY microtube opener Set of 3. JIMMY microtube opener, color coded, ergonomic, hands-free, Material: Made of high quality polyacetal, Autoclavable, can open both snap-cap and screw-cap microtubes, Set of 3

PIPETMAN Comfort Handle Blue. PIPETMAN Comfort Handle, Designed to help reduce pipetting fatigue, customizable, ergonomic design, offers a better grip, Autoclavable, reduces the risk of Repetitive Strain Injuries (RSI), Color: Blue, For Use With: PIPETMAN Classic, Neo, G, Pipets, Pack of 50

Distillation Rods, Buchi. Distillation Rods, Büchi - 043087, Distillation Rods, Set of 10

Tubeset, With 4 x screw sets and 1 x tube, Length: 1 m.

Dosing unit complete, Including piston, piston rod and UV protection coat, Size: 20ml.

Pre Treatment Retro Fit Kit, Includes: Carbon Filter Cartridge 10in.

Caron Preventative Maintenance Service Kits, Caron Products. Preventative Maintenance Service Kits, Caron Products - PM-6545-3-UVA, PM kit for model 6545 UVA lamps 230 V, 50 Hz

Caron Preventative Maintenance Service Kits, Caron Products. Preventative Maintenance Service Kits, Caron Products - PM-6545-3-VIS, PM kit for model 6545 VIS lamps 230 V, 50 Hz

WELCHNET Street Elbow, PVDF compression fitting, adapter 10 mm OD to male G3/8in thread.

WELCHNET Street Elbow, PVDF Compression Fitting adapter 10 mm OD to male 10-1/4 in.

Lid for Rotor 12 x 2 mL (F-45-12-11), for MiniSpin/plus, Material: stainless steel with rotor nut.

Lid for Rotor 2 x PCR Strip (F-55-16-5-PCR), for MiniSpin/plus, Material: aluminium with rotor nut.

Spacer Bar for Angled Test Tube Rack Holder, New Brunswick Shaker.

Angled Test Tube Rack Holder for user-supplied test tube racks and microplates, with optional spacer bar, For New Brunswick Shaker

Clamps, Starter Kit, Includes 4x 250 mL, 4x 500 mL, 2x 1 L, and 2x 2 L Erlenmeyer flask clamps.

Inner door gas screen 3, For 160 model CO2 incubators, Qualified service installed.

VWR Ejector Lock, 8X1200/12X1200.

VWR Tip Ejector Assembly, 12X1200.

VWR Tip Ejector,12X10/X20/X300.

VWR Adapter, Volume: 10ul, 12X10.

VWR Adapter, Volume: 10ul, 8X10.

VWR Tip Ejector Assembly, 300.

VWR Tip Ejector Assembly, 20.

VWR Button Assembly, X1200.

VWR Button Assembly, X300.

VWR Button Assembly, X20.

VWR Button Assembly, 1200.

VWR Button Assembly, 300.

VWR Button Assembly, 20.

VWR Button Assembly, 10/X10.

VWR Tip Holder, Lower Part, 10.

VWR Tip Holder, Upper Part, 300.

VWR Tip Holder, Upper Part, 10/20.

VWR O-Ring, 1X5, 300.

VWR Connecting Nut Single Pm.

VWR Baterry Tags, 1 X 4.

Bead Ruptor Pre-Filled Bead Tubes, 2 ml, Omni International - 19-624, Hard & Fibrous Mix with 0.7 mm Garnet Beads

Power Supply for use with CELLROLL and CELLSPIN.

Receiver Cassette, Hei-Vap.

LR20 Dist, For Expansion Vessel.

Evaporating Flask, Capacity: 6L, for Hei-Vap Industrial.

Evaporation Flask, Capacity: 10L, for Hei-Vap Industrial.

Evaporation Flask, Capacity: 20L, for Hei-Vap Industrial.

Easy Clamp, for Hei-Vap Industrial.

Adapter, Material: PTFE, for Hei-Vap Industrial.

Seal, Material: PTFE, for Hei-Vap Industrial.

Water Channel, Hei-Vap Industrial.

Thermometer, Spare Part Kit.

Electronic Motor, for Hei-Vap Industrial.

Electrical Cylinder, 24 V DC.

Heating Bath, for Hei-Vap Industrial.

Condenser Attachment, Spare Part Kit.

Cassette, Without Flask.

Easy Lock, Spare Part Kit.

Gearhead Axis Cpl, for Hei-Vap Industrial.

Screw cap, Spare Part Set, for LR20 Evaporator.

Proximity Switch, Spare Part Set, for LR20 Evaporator.

Continuous Feed Valve, for LR20 Evaporator.

Condenser Housing, For Hei-Vap Industrial.

Seal Gear Head Axis for, LR20 Evaporator.

Sandwich Seal 50/69/3.

Flat Belt, for LR20 Evaporator.

Small Split Ring, For LR20 Evaporator.

Rotary Button.

Inlet Tube, With Black Valve GL18, LR20.

H Shape Glass Distributor Piece.

Distributor Glass Piece.

Valve Gl25.

Valve Gl25 Short, Control.

Y-Joint, For LR20 Rotary evaporator.

Vacuum Socket.

Condenser K (LR20) Cooling Trap.

Condenser T Auto (Shorty).

Condenser T Auto (A).

Condenser LR20 Control.

Expansion Vessel 02281.

Distillate Condenser.

Coupling, Small, Complete.

Attachment CPL, for evaporator.

Hose, Material: PTFE, Dimensions: 6.5x0.5.

Vapor Tube For Hei-Vap Industrial Only.

Spacer Sleeve.

Bola-Coupling GL25.

Wing Handle (Miniwing) M6X15.

Elbow For LR20.

LR20 PTFE (Polytetrafluoroethylene) Adapter 98mm.

Heating Bath, Hei-VAP Rotary Evaporator, Taper: 14, Voltage: 115V.

Glassware Set, Contains Vertical condenser, centerpiece with valve, transparent Plastic coating, 1mL 24/40 standard ground joint evaporating flask, 1mL receiving flask, For Hei-VAP rotary evaporator

Laborota 4000 Rotary Evaporator Intermediary. Laborota 4000 Rotary Evaporator, Intermediary for G6 Condenser, For Interchangeable Glassware

Laborota 4000 Rotary Evaporator Valve. Laborota 4000 Rotary Evaporator, Valve for G6 Condenser, For Interchangeable Glassware

Glassware G5B Glass Set. Glassware, G5B Glass Set, Dry Ice Condenser, Includes 1000mL evaporating flask, one 1000mL receiving flask, For low-boiling solvents, Interchangeable Glassware

O-ring Seal, G5 Glassware Replacement Part, For low boiling liquids.

Insert, G5 Condenser, Halar-coated, For low-boiling solvents.

Jacket, Dry Ice Condenser, Halar-coated, For low-boiling solvents.

Glassware G3B Set, Includes 1mL NS 24/40 Joint sized evaporating flask, 1mL receiving flask, transparent, Plastic coating, For Hei-VAP rotary evaporator

Laborota 4000 Rotary Evaporator Support. Laborota 4000 Rotary Evaporator, Support for G3, G4, G6 Condensers, For Interchangeable Glassware

Vacuum Cap, For Condenser set G3, G4, G6 of laborota 4000 series rotary evaporator.

Inlet tube, Material: Glass, For use with Hei-Vap.

G3B Vertical Condenser, Transparent plastic coating, For all standard distillations, Laborota Interchangeable Glassware

Glassware G1B Set, Includes 1mL NS 24/40 Joint sized evaporating flask, 1mL receiving flask, transparent, Plastic coating, For Hei-VAP rotary evaporator

Laborota 4000 Rotary Evaporator Clamp S 35. Laborota 4000 Rotary Evaporator, Clamp S 35, For Interchangeable Glassware

Laborota 4000 Rotary Evaporator Clamp NS 24. Laborota 4000 Rotary Evaporator, Clamp NS 24, For Interchangeable Glassware

Laborota 4000 Rotary Evaporator G1 Diagonal Condenser. Laborota 4000 Rotary Evaporator, G1 Diagonal Condenser with safety coating, For Standard distillation of laborota Interchangeable Glassware

Condenser support, G3/G6 HEI-VAP.

Condenser support, G5 HEI-VAP.

Centering ring, Material: PTFE.

Seal, G5 Silicone O-ring, For G5 Condenser, with Condensate Trap for Low-Boiling Liquids.

Seal, For G6 Condenser, Centerpiece with Valve for Reflux Distillation.

Silicone O-Ring. O-Ring for Bio reactor, Replacement, Material: Silicone, Color: Orange, IDxCross section: 18.0 x 3.00mm, conform to FDA 21CRF

Silicone O-Ring. O-Ring for Bio reactor, Replacement, Material: Silicone, Color: Orange, IDxCross section: 26.6 x 2.62mm, conform to FDA 21CRF

Thermocouple Assembly. Replacement thermocouple assembly for use with Models 47900 and 48000.

Filter for mcleod gauge. Borosilicate glass. Filter protects mcleod gauge from dust and other contaminants. borosilicate glass bulb filled with fiberglass has tube connections at both ends. uses 5/16 id x 3/16 wall rubber tubing for connection to gauge. Freeze dry accessory.

Heater-distillation assembly. 115v. Replacement heater assembly, 115v, 600 w, for Kjeldahl nitrogen apparatus. Replacement parts Kjeldahl.

Replacement Sleeves for Laboratory Clamps, Ace Glass. Replacement Sleeves for Laboratory Clamps, Ace Glass Incorporated - 11074-31, Large, Labjaws Replacement Sleeve Set

Ace-Safe PTFE Tubing Connectors, Ace Glass Incorporated - 5858-05, Tubing Connector with Bushing

O-Ring. Neoprene, 42010.

Dual Valve Dispenser for MICROLAB 500 Instruments ML504A, ML540B, ML542BP, ML541C. Dual Valve Dispenser for ML504A, ML540B, ML542BP, ML541C. Accessory for MICROLAB 500 Instruments.

KIMAX brand Nessler Color Comparison Tubes, Tall Form. Unmatched set of 12. 50mL. Graduated at 50, 100mL. Shadowless bottoms transmit undistorted light. 24x375mm. Scale length: 275-295mm. Mentioned by APHA in Standard Wastewater/water Examination Methods. Designed from NNN-T-175, Type 1, Class 2.

HV Valve Fitting, 3.17mm Barbed Fitting. For connecting syringes, equipment and other devices to valves. Specifically designed to thread into 6.35mm-28 UNF-2B valve ports, providing a leaktight seal at 6.89bar. Designed for use with all Hamilton valves. Bore: 3.0mm.

Hamilton (HV) Plug Valve, HVX, Loop Flow Path 8-ports. Model: 8-7. Specifications: Dimensions: 1 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28. Break Away Torque, Ounces Inches: 60.

Hamilton (HV) Plug Valve, HVX, Loop Flow Path 4-ports. Model: 4-4. Specifications: Dimensions: 1 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28. Break Away Torque, Ounces Inches: 60.

Hamilton (HV) Plug Valve, HVX, 90[degree] Flow Path 2-ports. Model: 2-2. Specifications: Dimensions: 1 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28. Break Away Torque, Ounces Inches: 60.

Hamilton (HV) Plug Valve, HVP, Distribution Flow Path 4-ports. Model: 4-5. Specifications: Dimensions: 3/4 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28.

Hamilton (HV) Plug Valve, HVP, 90[degree] Flow Path 3-ports. Model: 3-2. Specifications: Dimensions: 3/4 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28. Break Away Torque, Ounces Inches: 10-15.

Hamilton (HV) Plug Valve, HV, Distribution Flow Path 2-ports. Model: 1-5. Specifications: Dimensions: 3/4 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28. Break Away Torque, Ounces Inches: 10-15.

Hamilton (HV) Plug Valve, HV, 90[degree] Flow Path 4-ports. Model: 4-2. Specifications: Dimensions: 3/4 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28. Break Away Torque, Ounces Inches: 10-15.

Hamilton (HV) Plug Valve, HV, 90[degree] Flow Path 3-ports. Model: 3-2. Specifications: Dimensions: 3/4 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28. Break Away Torque, Ounces Inches: 10-15.

Hamilton (HV) Plug Valve, HV, T Flow Path 3-ports. Model: 3-3. Specifications: Dimensions: 3/4 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28. Break Away Torque, Ounces Inches: 10-15.

Hamilton (HV) Plug Valve, HV, 180[degree] Flow Path 2-ports. Model: 1-1. Specifications: Dimensions: 3/4 Square. Temperature Range, [degree]C([degree]F): 10-100(50-212). Weight Ounces: 2. Maximum Pressure Rating, psig: 0-100. Valve Connection Ports: 1/4-28. Break Away Torque, Ounces Inches: 10-15.

MTB Sampling Valve. Lever-actuated on/off valve for storing and transporting samples in any GASTIGHT TLL syringes. Kel-F hub Needles attach to the valve. Pressure tested to 100 psig; autoclavable. Bore I.D.,.039. MTB Sampling Valve.

Three-Hole Adapter. An accessory for the DL31 Karl Fischer Titrator (62410-347).

Screw Cap. An accessory for the DL31 Karl Fischer Titrator (62410-347).

Accessories for METTLER TOLEDO Titrators, Mettler Toledo - 25688, Suction tubing, 83 cm

Accessories for METTLER TOLEDO Titrators, Mettler Toledo - 25687, Dispensing tube with siphon tip, 70 cm

SampleLock Male Luer Lock/Removable Needle Hub Adapter. Adapter threads in to the SampleLock valve to make the syringe compatible with various connectors and fittings.

SampleLock Female Luer/Removable Needle Hub Adapter. Adapter threads in to the SampleLock valve to make the syringe compatible with various connectors and fittings.

SampleLock Male Luer/Removable Needle Hub Adapter. Adapter threads in to the SampleLock valve to make the syringe compatible with various connectors and fittings.

Synthware Viton® O-Ring, Kemtech America - R229, Viton® O-Ring

STOPPER P-H SOLID SJ35 - S450035

Synthware Stopper with #15 O-Ring Joint, Kemtech America - S480015, #15 O-Ring Joint Stopper

Synthware Chromatography Columns with [ST] Joint, Reservoir, Fritted Disc, and PTFE Stopcock, Kemtech America - C398060C, Fits Tubing ID 73 mm

Synthware Chromatography Flow Control Adapters, Kemtech America - C1324

360 mL Stainless Steel Container for Waring Blenders. Stainless steel. 360mL. Working volume: 25 to 250mL. Height: 17cm. Semi-micro blending assembly with stainless steel blades. Stainless steel screw cover with 15.9mm sampling plug and rubber O ring seals. Fits Waring power units.

360 mL Stainless Steel Container for Waring Blenders. Stainless steel. 360mL. Working volume: 25 to 250mL. Height: 17cm. Semi-micro blending assembly with stainless steel blades. Friction-fit stainless cover with 15.9mm sampling plug and rubber O ring seals. Fits Waring power units.

Blending Assembly. For one and two liter Waring blenders.

Chex-All® Sterilization Tubes, Propper Manufacturing - 02600600, Chex-All® Sterilization Tubes

Chex-All® Sterilization Tubes, Propper Manufacturing - 02600200, Chex-All® Sterilization Tubes

Standard Spacer. For Sonic Sifter Separator (57334-035).

Top Cone Lock. For Sonic Sifter Separator (57334-035).

Column Lock. For Sonic Sifter Separator (57334-035).

Combination Platform. 46Lx46Wcm. For use with Lab-Line shakers, models 3506, 3508, 3518, 3520, 3527, 3528, 4626, 4628. Custom-design platforms for particular shaking requirements. Platforms are drilled and tapped with the maximum number of holes for use with a variety different types of glassware.

Blender Base for Waring Blenders, 70mm base for wide-mouth or mason jars. Comes with one borosilicate Glass straight-side wide mouth 250mL jar and small size blending assembly.

Accessories for Labquakeâ„¢ Rotisserie Hybridization Rotators, Thermo Scientific - SWX138, Green Lighted Switch, 220-240 V

Accessories for Labquakeâ„¢ Rotisserie Hybridization Rotators, Thermo Scientific - MT842X2A, Replacement Motor

Single Canister. An accessory for the Model 35VHC High Capacity Liquid Nitrogen Refrigerator.

Rack. 5-shelf rack without boxes. An accessory for the Model 35VHC High Capacity Liquid Nitrogen Refrigerator.

PACKING CONE RULON - 345HC

DIAPHRAM KIT - 098405

VWRPitchd Blade Propeller 1.5Inch. 5/16Inch Bore. Includes 4 Set Screws And Allen Key. 316L Electropolished Stainless Steel. Low Shear, High Top-To-Bottom Pumping Action With High Gas (Air) Injection. Axial Flow.

Flask Clamps for 500mL Flasks. For VWR Signature Benchtop Shaking Incubators and VWR Signature Shaking Water Baths.

Heat Transfer Fluid. Replacement Fluid Fliter, For use with various instruments for calibration and for osmometers.

Plunger Wire for Single Sample Osmometer, Osmo1 and Models 3320 and 3300.

Accessories for Micro-Osmometer, Advanced Instruments - 3M0827, Sampler Calibration Key

Disposable Filters. Replacement filters for use with osmometers and other calibration equipment.

STIR WIRE - 3C2243

Rack for Sample Tubes. Rack for use with tubes (52197-123; 52197-167).

Kjeldahl Granules, Selenized. 250g. Granules greatly reduce time required for the Kjeldahl digestion, and insure smooth boiling, both during digestion and subsequent distillation. Selenium is applied as a coating on the granules, as a convenient means to add to the digestion.

Lid rotor for 24d digital microcentrifuge.

Damper gas and pressure.

Flask Holder(clip), Stainless Steel, 500 ml.

HEPA Filter For CO2 Incubator Patented replacement part.

AccuSeal Adapter for Sealing PCR and 384 Well Plate.

AccuSeal Adapter for Sealing Assay Plate.

AccuSeal Semi-Automated Plate Sealer, US Cord, 230V.

AccuSeal Semi-Automated Plate Sealer, US Cord, 120V.

Acrylic Stand For Three Single Or 8 Channel Biopette E Pipettes.

Labnet Excel Electronic Pipette, 12 Channel, 2-20ul.

Labnet Excel Electronic Pipette, 12 Channel, 100-1200ul.

Labnet Excel Electronic Pipette, 8 Channel, 100-1200ul.

Labnet Excel Electronic Pipette, 8 Channel, 100-1200ul.

Labnet Excel Electronic Pipette, 8 Channel, 0.5-10ul.

Labnet Vortex Mixer - S0200, Labnet Vortex Mixer

Labconco Glass Lid. Provides additional protection from solvents and corrosives that attack acrylic. For use with all CentriVap centrifugal concentration systems.

Digital Temperature Meter.

A Receiver Para Sense To Ph.

ORION Fluoride Calibration Standard. 1ppm as F- with TISAB II. Supplied in 475mL bottles.

Converter Model 102. An accessory that is compatible with the Bransonic Sonifiers.

A Hvm Hamilton Modular Valve Positioner Valve With A 4-5 Fluid Path. It Is Ideal For Low Pressure Applications; From A Basic On/Off Flow To A Four-Way Distribution System.

REPLACEMENT SAMPLE PITCHER.

EYE WASH BOTTLE CAP.

DRIVE SHAFT.

BEARING ASSEMBLY.

Hearth Plate for Small Benchtop Muffle Furnaces, Type 1300. Hearth plate (30608-020, 30608-021).

Hearth Plate for Small Benchtop Muffle Furnaces, Type 1400. Hearth plate (30605-022, 30605-023).

Remote Blower. For use with Protector VS Ventilation Station. Direct-drive blower has 1/4hp TEFC motor, 115V/230V, 50Hz, 5.6/2.8A. Housing and wheel are corrosion-resistant epoxy-coated steel. Blower inlet is 15.24cm I.D. Outlet dimensions are 10.8x18.7cm O.D.

Tubes delivery long neck round. Replacement delivery tubes for rapidstill II. Replacement parts RS II.

Gasket, condenser pack-6. Gasket, condenser, upper, for goldfish fat extractor. Fat extractor acces.

Heating element. 115v. Replacement heating element, 115v, 100w, for goldfish fat extractor. Replacement parts fat ext.

Container pack-6. Borosilicate glass. Sample tube container (thimble holder) for goldfish fat extractor. Fat extractor acces.

Replacement Beakers. 100mL beakers for Goldfisch Fat and Oil Extractor (27681-000). Manufactured of durable thick-wall borosilicate glass. Top is flanged and grounded to facilitate connection to condenser.

Microcentrifuge Tube. 0.25ml. With attached cap.

5 Ml Disposable Tips. 5 ml disposable tips used in conjunction with large volume hand probe used with microlab 600 series dispensers / diluters

Consistometer. Determines consistency of viscous substances by measuring the distance a material flows under its own weight during a given time interval. Made of stainless steel, unit has spirit level and two leveling screws. Trough is graduated in 0.5cm divisions. Requires 75mL sample.

Scalpel Blades, Sterile. Carbon steel. Sterilized by gamma radiation. Individually sealed in foil peel packs. Blade: 23.

Explorer/Probe, Integra™ Miltex® - 69-6S, Explorer/Probe

Instrument Cleaning Brushes, Integra™ Miltex® - 3-1001

Boardwalk® Heavy-Duty Scour Pad - BWK186

Tubing Cutter. For 1/16 inch & 1/8 inch polymer tubing.

Swagelok GC Gas Fitting. 3.2mm Stainless Steel Back Ferrule.

Swagelok GC Gas Fitting. 3.2mm Stainless Steel Front Ferrule.

ON/OFF THROT VALVE SS 1/4IN - SS-4P4T

Swagelok GC Gas Fitting. 1.6mm Stainless Steel Union.

FERRULE 1/8IN PTFE BACK - T-204-1

Swagelok GC Gas Fitting, fluoropolymer resin Front Ferrule. 3.2mm fluoropolymer resin Front Ferrule.

Swagelok GC Gas Fitting. 3.2mm Stainless Steel Nut.

Self-Ballasted Bulb. For UVP Lamps, Models B-100SP.

Bulb Protector. For use with UVP Lamp (36595-025).

Reaction Bottle. 500mL. For use with hydrogenator (19790-000). Made of borosilicate glass and individually pressure tested to twice their specified maximum working pressure. Made with heavy wall and rounded bottom, which reduces its actual capacity to about 470mL.

Aluminum Split Sleeves with Zinc Rings. Used to secure shelves to shelf posts. Required for over-the-road applications and situations where the temperature is above 48[degree]C. For use with Super Erecta shelving. Set of 4.

Esd Grounding Cable. (Askcr) Provides Effective Method Of Electrostatic Discharge For Any Super Erecta Shelving And Metromax Q Esd Unit (Stationary Or Mobile), When Used In Conjunction With Aluminum Split Sleeves Or Esd Kit And Conductive Casters. Screws Onto Wire Snake Frame.

Accessories for Double Valve Oxygen Bomb, Parr - 5A10, Loop Electrode with Sleeve

Accessories for Double Valve Oxygen Bomb, Parr - 4A10, Straight Electrode with Sleeve

Accessories for Double Valve Oxygen Bomb, Parr - 406A, Lock Nut

PTFE Cup with Cover. 23mL. Replacement cup and cover for General-Purpose Acid Digestion Bomb model 4749.

VWR Gasket. 9x9 vacuum oven flourosilicone gasket. Maximum temperature: 200 degrees Celsius.

ultraAmp Polypropylene PCR Cap Strips. With eight domed caps. For real-time PCR applications. Prevent evaporation during thermal cycling or storage. For 96-well plates. Certified nonpyrogenic. Free of RNase, DNase, human DNA, PCR inhibitors. PCR patented by Hoffmann-La Roche. Requires license.

Accessories for CryoStorage Systems Taylor-Wharton, IC Biomedicals - R036-9C16, Necktube Core Tube for Low Level Alarms

Guardian Digital Air Flow Monitor Kit. For Protector Premier hoods. Continuously checks face velocity. Alerts user to velocities below preset level. Has face plate with circuit board, electrical power pack, probe, vinyl tubing and wiring connections. 115V, 50/60Hz.

ORION RS232 CABLE. Orion RS232 cable from Orion star meter to personal computer.

Serial Cable. For the Enviro-Genie Benchtop Refrigerator/Incubators 13500-846 and -848.

IN LINE FILTER - 149C

Accessories for BRAND seripettor® Economy Bottle-Top Dispensers, Brand - 704536, Filling Tube for Sterile Applications, 250 mm

LIGHT PROTECTION TUBE. Light protection tube. For use with METTLER TOLEDO DV1000 series burettes.

REPLACEMENT STOPPERS. Replacement stoppers for 3-hole stopper (1 x 10 mm stopper, 1 x 7.5 mm stopper and 6 needle hole stoppers).

COVER TERMINAL AX/MX/UMX - 11100830

RINSE TUBE FOR RINSING UNIT - 51108116

Capillary Inlet Adaptor Fitting Kit, 1/16-inch split/splitless fitting that accepts standard capillary ferrules, Kit includes adaptor fitting, capillary nut, gold plated 0.8 mm ID Dual Vespel Ring Inlet Seal, and one 0.4 mm ID ferrule

Male Quick Coupling, Size:1/8in male, Material: Stainless Steel.

Piston, for HPLC Systems, Model Number: 8800, 8810, ISOCHROM, P1000, P2000, P4000.

Needle Seal, Vespel for HPLC Systems, Model Number: LC-2010, SIL-10ADvp, 10AXL.

Seal Pack (Rebuilt - with Needle). Seal Pack (Rebuilt - with Needle) for 717 Autosampler, Includes: seal pack assembly, pre-column filter assembly, needle, 0.020inch ID tube assembly, compression screw, ferrule, Model Number: 717, LC Module 1

Kel-F Washer for HPLC Systems, Model Number: P1000, P2000, P4000.

Back-up Seal, for HPLC Systems, Model Number: 8800, 8810, ISOCHROM, P1000, P2000, P4000.

Seal Wash Face Seal, For HPLC systems, Model Number: 2690, 2695, 2790, 2795.

Low Pressure Seal. Low-Pressure Seal, Gold, for HPLC Systems, Model Number: Int. 4000, 1, 10, 2, 200 Series, 250, 3, 3B, 4, 400, 410, 620

Compression Screw, for HPLC Systems, Material: Stainless Steel.

Plunger Seal, Gold, for HPLC Systems, Model Number: CM3000, CM3200, CM3500, CM4000, Graphite-filled PTFE; best for organic solvents, Ultra-high molecular weight polyethylene increased resistance to abrasion, best for buffers

Wash Tube Seal Kit, For HPLC system, Model Number: 2690, 2695, 2790, 2795.

Rotor Seal Assembly, Rheodyne 7010, for HPLC Systems, Model Number: TSP AS100, 300, 1000, 3000, 3500, 8875 and 8880 Autosamplers

Seal Pack Rebuild Kit (without Seal Wash Tube Assembly), for HPLC Systems, Includes: wash tube seal, seal wash tube, PTFE washer, filter retainer, lower wash seal frit, needle wash frit, TFE washer, needle, injector seal, compression screw, ferrule, Model Number: 2690, 2695

Needle, for HPLC Systems, Model Number: PE Series 200 Pumps.

High Pressure Seal Kit, for HPLC Systems, Includes: pump seals (4), backup rings (4), O-rings (4), Model Number: Int. 4000, 1, 10, 2, 200 Series, 250, 3, 3B, 4, 400, 410, 620

Syringe Assembly, 250 uL, for HPLC Systems, Model Number: 1000, CM3000, CM3500, AS100.

Standard High Pressure Seal, Gold, for HPLC Systems, Model Number: Int. 4000, 1, 10, 2, 200 Series, 250, 3, 3B, 4, 400, 410, 620

Ferrule for HPLC Systems, Material: Stainless Steel.

Inlet Check Valve for HPLC Systems, Model Number: Int. 4000, 1, 10, 2, 200 Series, 250, 3, 3B, 4, 400, 410, 620, Series 200 Micropump

Deuterium Lamp, Long Life (2,000 hours) for Detectors, Model Number: 486, Standard lamps have nominal 1,000-hour life

Deuterium Lamp for Detectors, Model Number: 996, 2996, Standard lamps have nominal 1,000-hour life.

Deuterium Lamp, for HPLC Systems, Model Number: Lambda-2, 5, 7, 9, 10, 11, 12, 14, 15, 16, 17, 18, 19, 20, 25, 40, 800, 900

Outlet Check Valve, for HPLC Systems, Model Number: PE 200, 4, 250, 400, 410, 620.

Deuterium Lamp, for HPLC Systems, Model Number: 200 Series, 785A.

Deuterium Lamp for Detectors, Model Number: 2487, 2488, Standard lamps have nominal 1000hour life.

Plunger Seal, Gold Superseal, for HPLC Systems, Model Number: 8800, 8810, ISOCHROM, P1000, P2000, P4000, Ultra-high molecular weight polyethylene increased resistance to abrasion, best for buffers

Plunger Seal, Gold, Model Number: 655, 6000, 6200, 7100, for HPLC Systems.

Rotor Seal Assembly for HPLC Systems, Model Number: SIL-10A, 10AXL, 10Ai.

Plunger Assembly, Material: Ceramic, for HPLC Systems, Model Number: LC-10ATvp.

Plunger Assembly, Material: Ceramic, for HPLC Systems, Model Number: LC-10ADvp.

Res-SilC Packing Material 10 g. Res-SilC Packing Material, Mesh: 60/80, Temperature Limits: 300 deg C, for Unique separation of saturated and unsaturated hydrocarbons, with higher thermal stability, For determination of C1-C5 hydrocarbons, Equivalent to Durapak and Porasil packing, Size: 10 g

S1 Pipet Filler Wing Stand.

Kjeldahl ballon, 500ml.

Tin foil 50x50mm, for DUMAS Nitrogen/Protein Analyzer(Calibration standards (EDTA, 9.57% N), o-rings, seals and fittings, Long-life and premium reagents and catalysts, Designed to optimize the performance of analyzer)

Glass splash head kit, for UDK129 Kjeldahl Distillation Unit.

Absorbent Material . Absorbent Material, for Cryo Express (CX) Dry Shippers, prevents a liquid spill if the unit is tipped over, enables faster charging,

Cap, Tamper-Evident Aluminum, Color: Natural, Size: 28.5, Style Complete: Tear Off, for Uni-Dose Bottles and Vials, Three-piece Pulp / PVDC / PE lined aluminum caps have unique metal inserts

Apiezon Stopcock/Ground Glass Joint Greases High Temperature Vacuum Grease 25g.

Accessories for Orionâ„¢ Star Series, Thermo Scientific - 1010003, Universal Power Adapter

SPE Cartridge. Method Specific SPE Cartridge, Method: Ultra Quat SPE, Volume: 6 mL, 500 mg, For use in HPLC analysis of paraquat/diquat

FalconPipet Controller Silcone Pipet Holder.

FalconPipet Controller Nose Cone.

FalconPipet Controller Casing Part 1 And 2.

FalconPipet Controller Connector Gasket.

FalconPipet Controller Connector.

FalconPipet Controller Divider Casing.

FalconPipet Controller Operation Buttons.

FalconPipet Controller O-Ring.

FalconPipet Controller Spring.

FalconPipet Controller Silcone Tubes.

FalconPipet Controller Pump.

FalconPipet Controller Control Board.

FalconPipet Controller Battery (Set Of 3).

Orange Silicone O-Ring 111. Silicone O-Ring 111, orange, for bioreactor components, Orange silicone o-rings conform to FDA 21CRF, ID x Cross Section (mm)10.7 x 2.60.

Orange Silicone O-Ring 8.50. Silicone O-Ring 8.50, orange, for bioreactor components, Orange silicone o-rings conform to FDA 21CRF, ID x Cross Section (mm)8.50 x 2.50.

GLASSINE WEIGHING PAPER 3X3. Our glassine weighing paper is moisture-resistant and non-absorbent

GLASSINE WEIGHING PAPER 4X4. Our glassine weighing paper is moisture-resistant and non-absorbent

Formvar/carbon 2x1mm, Cu.

OPTIVISOR AUXILARY LENS. increase 2-1/2X magnification

HARRIS UNICORE, 1.0MM. a disposable multi-purpose sampling tool for soft substrates, made from polypropylene, comes individually wrapped and sterilized by ethylene oxide, can be reusable by rinsing the tip with ethanol after each use and autoclaving for

HARRIS UNICORE, 3.0MM. a disposable multi-purpose sampling tool for soft substrates, made from polypropylene, comes individually wrapped and sterilized by ethylene oxide, can be reusable by rinsing the tip with ethanol after each use and autoclaving for

HEAD BAND MAGNIFIER, 2X OPTIVISON. dial adjustment headband that fits any head size, lightweight and durable, fits over eyeglasses, adjustable pivot assembly on visor can be set to desired tension, lenses are ground and polished prismatic, working distan

DISPOSABLE BASE MOLD 15X15X5MM. designed to fit all existing cassettes, because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals, packed 125/dispenser box

DISPOSABLE BASE MOLD 7X7X5MM. designed to fit all existing cassettes, because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals, packed 125/dispenser box

DISPOSABLE BASE MOLD 24X24X5MM. designed to fit all existing cassettes, because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals, packed 125/dispenser box

DISPOSABLE BASE MOLD 30X24X5MM. designed to fit all existing cassettes, because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals, packed 125/dispenser box

DISPOSABLE BASE MOLD 37X24X5MM. designed to fit all existing cassettes, because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals, packed 125/dispenser box

Front Ferrule, Size: 1/16inch, Material: Stainless Steel, Swagelok.

Back Ferrule, Size: 1/16inch, Material: Stainless Steel, Swagelok.

O-Ring. Replacement for Flip Top Inlet Sealing System Material:Viton

Reducing Union 400-6-1 Swagelok fitting Size:1/4 to 1/8 Material:Stainless steel.

Tee 100-3 Swagelok fitting Size:1/4in Material:Stainless steel.

Frits (PTFE). Frits (PTFE) Model : 1050, 1100, 1200 for HPLC System

Filter and Cleaning Kit. Replacement HEPA filter and Cleaning Kits for a CO2 incubators, quantity 1, For 3110 Series, 310 Series (w/ HEPA option) difficult-to-clean chambers and gaskets (except door) and tubing filters-cleaning-kits

AirShield, creates a positive pressure blanket of fresh air inside the Microlab 600 that pushes air out over critical components on the outside of the pump, protecting them from the environment

Replacement in-chamber HEPA filter for 160L CO2 incubators customer installed.

Blot Washer - 220V CE, with control or valve console, (1) 4L wash bottle with modified top, tubing for all connections, (1) mini blot tray, (1) standard blot tray, (1) tube collet, delivery bit, and power cord.

High temperature sealing grease.

Pre-packed reduction reactor.

Anhydrone, 454g.

Ethylenediaminetetraacetic acid, 100 g.

Vaflon seal for FIWE (Scharrer method).

Water spray device.

Polytetrafluoroethylene sheaths for 29/32 cones.

Tin Foil Cups, 150pcs.

Ceramic ash collector.

Pre-packed combustion reactor.

Isoltr Silc/Adhs 1 2Mmd 25/Pk.

Isoltr Silc/Adhs 1 1Mmd 25/Pk.

Flow Indicators, Bürkle - 8720-1003

Economical Stainless Steel 20 g, Slotted Weight Class 7, For rough weighing operations.

Economical Stainless Steel 100 g, Slotted Weight Class 7, For rough weighing operations.

Category