• 0
Shop Products $

Stacking Bins, Case, Treston - 1940-4ESD, Case of ESD Stacking Bins, Black

Stacking Bins, Case, Treston - 1950-4ESD, Case of ESD Stacking Bins, Black

Stacking Bins, Case, Treston - 3040-4ESD, Case of ESD Stacking Bins, Black

Stacking Bins, Case, Treston - 3050-4ESD, Case of ESD Stacking Bins, Black

ESD Pocket Protector, Hip Pocket - 5 1/8inch x 7inch, Clear Vinyl, Used with ESD smocks and garments to prevent pockets from tearing or ripping. Dissipative Material

ESD Pocket Protector, Hip Pocket -6-1/2inch x 8inch, Clear Vinyl, Used with ESD smocks and garments to prevent pockets from tearing or ripping. Dissipative Material

Foot Grounders, sole, large, 2meg, Sole Grounders provide a large contact area on ball of foot for a consistent path to ground. Tear Resistant Rubber with Inner Scrim. 30inch Grounding Tab. Resistor to protect from line voltage.

Workstation Cover. ESD Workstation Cover, 18inch x 24inch, Protects covered product at workstation from ESD, dust and other contaminants. Minimum of 9% carbon conductive nylon fibers with bound edges for continuous and consistent charge dissipation throughout lifetime of cover

Workstation Cover. ESD Workstation Cover, 36inch x 48inch, Protects covered product at workstation from ESD, dust and other contaminants. Minimum of 9% carbon conductive nylon fibers with bound edges for continuous and consistent charge dissipation throughout lifetime of cover.

Workstation Cover. ESD Workstation Cover, 48inch x 48inch, Protects covered product at workstation from ESD, dust and other contaminants. Minimum of 9% carbon conductive nylon fibers with bound edges for continuous and consistent charge dissipation throughout lifetime of cover.

Inspection Gloves. ESD Inspection Gloves, small, pair, Dissipative (1 x 105 1 x 108 ohms) Thunderon Fibers, Kevlar Kleen Carrier Yarn, Seamless Fine Gauge Knit, Non-Scratch Touch screen Compatible

Inspection Gloves. ESD Inspection Gloves, medium, pair, Dissipative (1 x 105 1 x 108 ohms) Thunderon Fibers, Kevlar Kleen Carrier Yarn, Seamless Fine Gauge Knit, Non-Scratch Touch screen Compatible

Inspection Gloves. ESD Inspection Gloves, large, pair, Dissipative (1 x 105 1 x 108 ohms) Thunderon Fibers, Kevlar Kleen Carrier Yarn, Seamless Fine Gauge Knit, Non-Scratch Touch screen Compatible

Inspection Gloves. ESD Inspection Gloves, x-large, pair, Dissipative (1 x 105 1 x 108 ohms) Thunderon Fibers, Kevlar Kleen Carrier Yarn, Seamless Fine Gauge Knit, Non-Scratch Touch screen Compatible

E-Z Mount for 2U500 Ionizer. Staticmaster EZ Mount, an indispensable accessory for mounting a 2U500 Ionizing Cartridge in the balance chamber. Simply remove the protective layer of double-sided tape and affix to the back wall of the chamber

E-Z Mount for 1U400 Ionizer. Staticmaster EZ Mount, an indispensable accessory for mounting a 1U400 Ionizing Cartridge in the balance chamber. Simply remove the protective layer of double-sided tape and affix to the back wall of the chamber

I-Beam Stand Ionizer Kit. Staticmaster I-Beam Stand Ionizer Kit, It provides a inch shocklessinch solution for removing static charge on larger or irregular shaped shaped objects when a fan cannot be used because of fine powders or other elements.

U-Frame Positioner. Duostat U-Frame Positioner, completely eliminates any charge on both sides of the filter before they are transferred to the Balance Chamber It uses two (2) 2U500 Ionizers.

Grounding Kit. Staticmaster 2U500 Grounding Kit, significantly enhances the static eliminating power of the 2U500 Ionizing cartridge

Mini-fan Ionizer. Ionmaster Mini-fan Ionizer, is the perfect solution for objects that have an irregular shape and need to have their charge removed before being used in the balance chamber.

Bottle only. Bottle Only DURASTATIC6 oz ESD-safe long lasting static dissipative bottle in orange. Contains no migratory additives. Toluene printed with GHS Hazard Communication Safety (HCS) symbols for easy identification. USA Made. Rtt: 10E4-to 1 x 10E11-ohms tested per ANSI/ESD STM11.12

Bottle only. Bottle Only DURASTATIC6 oz ESD-safe long lasting static dissipative bottle in yellow. Contains no migratory additives. Acetone printed with GHS Hazard Communication Safety (HCS) symbols for easy identification. Ideal for storing liquids. USA Made.

Bottle only. Bottle Only DURASTATIC6 oz ESD-safe long lasting static dissipative bottle in yellow. Contains no migratory additives. Isopropanol printed with GHS Hazard Communication Safety (HCS) symbols for easy identification. For liquid storage. USA Made.

Static Dissipative Tool. Blue ESD-Safe Static-dissipative Tool roll up. Constructed of durable, blue vinyl. Rolls up for easy storage; hook and loop secures closure; Pockets designed to store and organize up to 18 tools. Unrolled Dimensions: 20 x 12.5inch; USA Made

Tweezer, straight 4.5inch wide point (1/4inch) conductive plastic tweezer (10 to the 5th ohms). the 35a-esd is temperature resistant to 212 degrees f.

Swab 3.2in. CONSTIX swabs electrostatic dissipative are available with truly conductive handles for ESD sensitive applications. Foam heads, polypropylene handles. 0.03in (0.07cm) pointed foam tip, 0.10in (0.25cm) conductive polypropylene handle, 3.2in (8.1cm) total length

Static ionizer Ion-100A AM Ion generation by DC corona discharge (Bipolar).

Sole Grounder with Snap-Loc, 0.080inch thick dual layer rubber with a black conductive outer layer and a non-marring inner layer, 30inch long blue polyester grounding tab, Blue elastic stretch material, Snap lock fasteners, 2 megohm resistor, Stretch elastic back, Size: Large

Sole Grounder with Snap-Loc, 0.080inch thick dual layer rubber with a black conductive outer layer and a non-marring inner layer, 30inch long blue polyester grounding tab, Blue elastic stretch material, Snap lock fasteners, 2 megohm resistor, Stretch elastic back, Size: Extra Large

Sole Grounder with Snap-Loc, 0.080inch thick dual layer rubber with a black conductive outer layer and a non-marring inner layer, 30inch long blue polyester grounding tab, Blue elastic stretch material, Snap lock fasteners, 2 megohm resistor, Stretch elastic back, Size: Extra Small

Sole Grounder with Snap-Loc, 0.080inch thick dual layer rubber with a black conductive outer layer and a non-marring inner layer, 30inch long blue polyester grounding tab, Blue elastic stretch material, Snap lock fasteners, 2 megohm resistor, Stretch elastic back, Size: Small

Sole Grounder with Snap-Loc, 0.080inch thick dual layer rubber with a black conductive outer layer and a non-marring inner layer, 30inch long blue polyester grounding tab, Blue elastic stretch material, Snap lock fasteners, 2 megohm resistor, Stretch elastic back, Size: Medium

ESD Table Mat Roll Gray. Table Mat, ESD-Safe, Roll, Colour: Gray, Hardness: 60 (Shore A), Tensile Strength: 1000 PSI, Elongation: 300%, Charge Decay 5kV-50V: 0.01sec, Material: Durable 2-ply rubber, with static dissipative top layer, Dimension: 36in x 50ft x0.060in

ESD Table Mat Roll Royal blue. Table Mat, ESD-Safe, Roll, Colour: Royal Blue, Hardness: 60 (Shore A), Tensile Strength: 1000 PSI, Elongation: 300%, Resistance to Ground: 8 x 10 raised to 6-8 ohms, Charge Decay: 0.01sec, Material: Durable 2-ply rubber Dimension: 36in x 50ft x0.060in

ESD Ta Mat cut Gray. Table Mat, ESD, With Grounding Hardware, Colour: Gray, Hardness: 60, Tensile Strength: 1000 PSI, Elongation: 300%, Resistance-Ground: 8 x 10 raised to 6-8 ohms, Charge Decay 5kV-50V: 0.01sec, Material: 2-ply rubber, static dissipative top layer, Dimension: 24inx 36inx0.060in

ESD Table Mat cut Nasa blue. Table Mat, ESD, With Grounding Hardware, Colour: Royal Blue, Hardness: 60 (Shore A), Tensile Strength: 1000 PSI, Elongation: 300%, Charge Decay: 0.01 sec, Material: 2-ply rubber, static dissipative top layer, Dimension: 24in x 36in x0.060in

ESD Table Mat cut Royal blue. Table Mat, ESD, With Grounding Hardware, Colour: Royal Blue, Hardness: 60 (Shore A), Tensile Strength: 1000 PSI, Elongation: 300%, Charge Decay: 0.01 sec, Material: 2-ply rubber, static dissipative top layer, Dimension: 24in x 36in x0.080in

ESD Table Mat cut Royal blue. Table Mat, ESD, With Grounding Hardware, Colour: Royal Blue, Hardness: 60 (Shore A), Tensile Strength: 1000 PSI, Elongation: 300%, Charge Decay: 0.01 sec, Material: 2-ply rubber, static dissipative top layer, Dimension: 24in x 48in x0.060in

ESD Table Mat cut Green. Table Mat, ESD, With Grounding Hardware, Colour: Green, Hardness: 60(Shore A), Tensile Strength: 1000 PSI, Elongation: 300%, Charge Decay 5kV-50V: 0.01sec, Material: 2-ply rubber, static dissipative top layer, Dimension: 24in x 48in x0.080in

ESD Table Mat cut Royal blue. Table Mat, ESD, With Grounding Hardware, Colour: Royal Blue, Hardness: 60 (Shore A), Tensile Strength: 1000 PSI, Elongation: 300%, Charge Decay: 0.01 sec, Material: 2-ply rubber, static dissipative top layer, Dimension: 24in x 48in x0.080in

ESD Table Mat cut Royal blue. Table Mat, ESD, With Grounding Hardware, Colour: Royal Blue, Hardness: 60 (Shore A), Tensile Strength: 1000 PSI, Elongation: 300%, Charge Decay: 0.01 sec, Material: 2-ply rubber, static dissipative top layer, Dimension: 36in x 72in x0.060in

ESD Table Mat Roll Royal blue. Table Mat, ESD-Safe, Roll, Colour: Royal Blue, Hardness: 60 (Shore A), Tensile Strength: 1000 PSI, Elongation: 300%, Resistance to Ground: 8 x 10 raised to 6-8 ohms, Charge Decay: 0.01sec, Material: Durable 2-ply rubber Dimension: 30in x 50ft x0.080in

Calibration Unit, Tester Calibration Device, ESD, ohm Metrics CAL 1000, Accuracy: +/- 3%, Dimensions: 7in x 3.7inx 1.3in, Passive. No power source required, Wrist strap test range: 750 kil ohm - 10 meg ohm, Footwear test range: 750 kil ohm - 100 meg ohm, NIST traceable

Dual Conductor Resistance Monitor. Dual Conductor Continuous Resistance Monitor, ohm Metrics, DC Power Supply: 7-15 VDC, 100mA, AC Input: 100-240 VAC, 1A, Temperature limits: 50 deg F to 122 deg F, Dimension: 4in W x 3in D x 1in H, with 2 wrist straps/persons + 2 Mats

Dual Conductor Resistance Monitor. Dual Conductor Continuous Resistance Monitor, ohm Metrics, Power: 9-12V,100mA, Temperature limits: 50 deg F (10 deg C) to 122 deg F (50 deg C), Dimension: 2in W x 3in D x 1in H, with 1 Person/Wrist Strap, Wrist Strap Alarm: Low: 1.8 meg ohm, High: 35 meg ohm

Dual Conductor Resistance Monitor. Dual Conductor Continuous Resistance Monitor, ohm Metrics, Power: 9-12V,100mA, Temperature limits: 50 deg F to 122 deg F, Dimension: 2in W x 3in D x 1in H, with 1 Person/Wrist Strap & 1 Worksuface Mat, Wrist Strap Alarm: Low: 1.8 meg ohm, High: 35 meg ohm

Periodic Verification Unit/Tool, ohm Metrics, for Dual Conductor Continuous Resistance Monitor, For models CM2800, CM2815, CM1600

Dual Conductor Resistance Monitor. Dual Conductor Continuous Resistance Monitor, ohm Metrics, DC Power Supply: 8-12 V, 100mA, AC Input: 100-240 VAC, 1A, Networkable Dual Wire, Wrist-strap Alarm: High Limit: 8M ohm, 35M ohm, Low Limit: 750K ohm/2.4M ohm, Operator Voltage Alarm: +/-1V approx +/-5V

Dual Conductor Resistance Monitor, ohm Metrics, DC Power Supply: 7-15 VDC, 100mA, AC Input: 100-240 VAC, 1A, Temperature: 50 deg F to 122 deg F, with 2 wrist straps/persons + 2 mats, Dimensions: 4in W x 3in D x 1in H, Wrist-strap Alarm: High Limit: 35M ohm

Ground Monitor. Single Wire Constant Ground Monitor, ohm Metrics, Power Input 120VAC-60hz, Power Output: 12VDC, 200mA, Wrist open circuit voltage: 0.7 VDC, +0.1VDC at 2mA, with One wrist strap/person, Dimension: 0.88in H x 1.75in W x 1.25in D, for ESD protection

Ground Monitor. Single Wire Constant Ground Monitor, ohm Metrics, Power Input 120VAC-60hz, Power Output: 12VDC, 200mA, Wrist open circuit voltage: 0.7 VDC, +0.1VDC at 2mA, with One wrist strap/person/ Bench, Dimension: 1.00in H x 2.40in W x 2.30in D, for ESD protection

Periodic Verification Unit/tool, ohm Metrics for Work Station Monitor, Dimension: 0.88in H x 1.75in W x 1.25in D, Power Input: 120VAC-60hz, Wrist open circuit voltage : 0.7 VDC, +0.1VDC at 2mA, Alarm indicators : Visual, audible (green: safe, red: unsafe)

Ground Monitor. Single Wire Constant Ground Monitor, Power Input 120VAC-60hz, Power Output: 12VDC, 200mA, Wrist open circuit voltage 0.7 VDC, +0.1VDC at 2mA, Monotoring: Two wrist strap/person/ Bench, Alarm indicators Alarm/LED (green: safe, red: unsafe), Dimensions 1.00in H x 2.40in W x 2.30in D

Periodic Verification Tool, Power Input: 120VAC-60hz, Wrist open circuit voltage: 0.7 VDC, +0.1VDC at 2mA, Mat open circuit voltage: 5.0-7.5 VDC, Dimension: 0.88in H x 1.75in W x 1.25in D, Alarm indicator: Visual, audible (green: safe, red: unsafe)

Tester and Foot Plate, ohm Metrics, Stand - Free Standing, Power: 9v Battery or AC adapter, Operation Resistance: Bridge, Accuracy: + 20%, Weight: 12lbs, Height: 39 ins, ohm Metrics, for ESD ground devices, Footwear Range: 750 Kil ohms - 100 Meg ohms, meets ANSI ESD S20.20

Deluxe Combo Tester & Foot Plate, Stand - Free Standing, Split footplate design, Low and High failure alarm modes, Low battery: Voltage 7, change battery, for Ground Tester, ower: 9v Battery or AC adapter, Operation Resistance: Bridge, Accuracy: + 15%

Deluxe Wrist Strap/Footwear Tester, with LCD readout and near-fail alert, ohm Metrics, Power: 100-240VAC,50/60Hz, Operation Temperature: 0 C approx 40 C,indoor use only, Dimension: Tester: 140x125x33mm(LxWxH), Foot plate: 480x403x25mm(LxWxH)

Resistance Probe 50-60 Shore A. Resistance Probe for ESD Resistivity Meter, ohm Metrics, Coated with insulative paint (not dissipative PVC sleeves), Conductive rubber, durometer 50-60 Shore A scale, NIST certificate, Required 2 probes

Pocket Resistance Meter, ohm Metrics, Test range: 103-1012, Test voltage: 10V/100V(automatic ranging), Accuracy + 5%, Power Supply 9V-Battery (PP3), Display: GREEN -105 K Conductive, YELLOW 106-1011 M Dissipative, Dimension: 5.15in H x 2.50in W x 1.8in D

Digital Surface Resistance Test Kit with Temp and RH, ohm Metrics, Power Supply: 9V-Battery (PP3), Accuracy: + 5%, Resistivity: 103-1012 ohms/sq, Resistance: 103-1012 ohms, Temperature: 0C-37.7C(32F to 100F), Dimension: 5.15in H x 2.50in W x 1.8in D

Wrist Strap Tester, ohm Metrics, Test Voltage: Regulated 9 volts DC, Temperature: Operating: 10C to 40C, Storage: -15C to +60C, Accuracy: + 5%, Operating Voltage: 6.5 volts to 9 volts, Relative Humidity: 0%to 90% (non- condensing), Dimension: 3.5in H x 2.75in W x 1.25in D

Output Ionizer Nozzle tip, Wide Angle, Short With 90 Degree Spray, produces larger circumference air stream, for Ptec Air Ionizer

Output Ionizer Nozzle tip, Male Luer Lock. Output Ionizer Nozzle tip, male Luer Lock, With Bendable Extension, 15D Spray, allows the Ionizer to attach air tube to extend, for Ptec Air Ionizer

Output Ionizer Nozzle tip, Long Range, 15 Degree Spray With 2in Straight Extension, spray diameter as the Standard standard nozzle, for Ptec Air Ionizer

Output Ionizer Nozzle tip, Bendable. Output Ionizer Nozzle tip, Flexible, 12in long tip, allows nozzle to point at specific areas that need to be ionized, for Ptec Air Ionizer

Output Ionizer Nozzle tip, Bendable. Output Ionizer Nozzle tip, Flexible, 16in long tip, allows nozzle to point at specific areas that need to be ionized, for Ptec Air Ionizer

Output Ionizer Nozzle tip, Bendable. Output Ionizer Nozzle tip, Flexible, 20in long tip, allows nozzle to point at specific areas that need to be ionized, for Ptec Air Ionizer

Output Ionizer Nozzle tip, Bendable. Output Ionizer Nozzle tip, Flexible, 8in long tip, allows nozzle to point at specific areas that need to be ionized, for Ptec Air Ionizer

AC Ionizing Blower, Bench Top, Power Input: 120 V AC, 60 Hz, 36W, Air Volume: 50 CFM - 100 CFM (low- high), Balance: 0 +10 volts, Temperature: 32-122 deg F (0-50 deg C), Enclosure: Steel, Finish: Powder coat, off white, 1ftx5ft area coverage, Dimension: 7.0x10.25x3.75in

AC Ionizing Blower, Overhead, 2 fan, Power: 120 V AC, 60 Hz, 70W, Air Volume: 100 CFM - 200 CFM [low -high], 2ft x 3ft area coverage, Balance: 0 +10 volts, Temperature: 32-122 deg F (0-50 deg C), LED Technology, Enclosure: Steel, Dimension: 23in W x 6.75in H x 3.35in D

AC Ionizing Blower, Overhead, 3 fan, Power: 120 V AC, 60 Hz, 70W, Air Volume: 150 CFM - 300 CFM [low -high], 2ft x 4ft area coverage, Balance: 0 +10 volts, Temperature: 32-122 deg F (0-50 deg C), LED Technology, Enclosure: Steel, Dimension: 38.78in W x 6.75in H x 3.35in D

Ionizing Blower. AC Extended Range Ionizing Blower, Power Input: 120 V AC, 60 Hz, 350W (max), Air Volume: 50 CFM - 230 CFM (low- high), 3ftx6ft area coverage, Balance: 0 +10 volts, Temperature: 32-122 deg F (0-50 deg C), Enclosure: Steel, Dimensions: 19.7in W x 7.28in H x 7.9inD

Filter assembly for Ptec Static Eliminator Ionizing Blow Off (Air) Gun.

Micro Filter Hollow Fiber, Power Input: AC 100V approx 240V, 50/60Hz, Power Outlet: un-fused, 0.5A or 1.0A max, Balance : +10 volts, Ion Emission : AC, 68KHz, Temperature : 66-78 deg F, Controls: On/off switch, Footswitch, Table mount, Dimensions: 12inH x 5.75inW x 7.25inD

Micro Filter Hollow Fiber, Power Input: AC 100V approx 240V, 60Hz, Power Outlet: 2.2, Balance : +15 volts, Ion Emission : AC, 36KHz, Temperature : 66-78 deg F (19-25 deg C), Controls: On/off switch, Footswitch, Air Pressure: 20-75 PSI, CDA or N2, Dimensions: 8.5inx4inx 1in

Ptec Ionizer Standard Nozzle. Ptec Ionizer, with Standard Nozzle, Power Supply: Volt AC 80V approx 240V 50/60Hz, Output HV: AC2200V, Balance : +10 volts, Ozone Density : Less than 0.01 ppm, Emitter Point: Alloy Discharge Needle, Max. Air Range: 2 approx 7 (kgf / cm2), Dimension: 2.0x7.1x 2.7in

Ptec Ionizer Standard Nozzle. Ptec Ionizer, with Standard Nozzle, With Photo Electric Eye, Power Supply: Volt AC 80V approx 240V 50/60Hz, Output HV: AC2200V, Balance : +10 volts, Ozone Density : Less than 0.01 ppm, Emitter Point: Alloy Discharge Needle, Dimension: 2.0inH x 7.1inW x 2.7inD

Ptec Airflex Ionizer, Flexible Neck Ionizing Nozzle, Power Input AC 100V approx 240V, 50/60Hz, Power Outlet: un-fused, 0.5A or 1.0A max, Ion Emission AC, 68KHz, Balance: +30 volts, Decay Time: 1000V-100V, Temperature: 66-78 deg F (19-25 deg C), Dimensions 12x5.75x7.25in

Ptec Airflex Ionizer, with Flexible Neck Ionizing Nozzle, Photo Electric Eye,Power Input AC 100V approx 240V, 50/60Hz, Power Outlet: un-fused, 0.5A or 1.0A max, Ion Emission AC, 68KHz, Balance: +30 volts, Temperature: 66-78 deg F (19-25 deg C), Dimensions 12x5.75x7.25in

Ptec Ionizer Benchtop Blower, Power Input 24 VDC, 12W, Power Outlet: un-fused, 0.5A or 1.0A max, Ion Emission: AC, 68KHz, Balance: +5 volts, Temperature: 66-78 deg F (19-25 deg C), Humidity: 20-60% RH, Airflow: 115 cfm, High speed, Dimension: 7.5inH x 7.1inW x 2.7inD

Ptec In Tool AC Ionizer Blower, Power Input 24 VDC, 12W, Power Outlet: un-fused, 0.5A or 1.0A max, Ion Emission: AC, 68KHz, Balance: +5 volts, Temperature: 66-78 deg F (19-25 deg C), Humidity: 20-60% RH, Airflow: 32 cfm, High speed, Dimension: 5.5x5.5x2.28in

Ptec Overhead Ionizer, Three AC Fan, Power Input 24 VDC, 36W, Power Outlet: un-fused, 0.5A or 1.0A max, Ion Emission: AC, 68KHz, Balance: +10 volts, Temperature: 66-78 deg F (19-25 deg C), Humidity: 20-60% RH, Airflow: 115 cfm per fan, High speed, Dimensions 2.5x39.4x5.75in

Ptec Ionizing Blow Off (Air) Gun No filter. Ptec Ionizing Blow Off (Air) Gun, No filter, Power Input: AC 100V-240V, 50/60Hz, Power Outlet: un-fused, 0.5A or 1.0A max, Ion Emission: AC, 68KHz, Temperature: 66-78 deg F, Dimensions: Hand Unit: 8.5inH x 4inW x 1inD, Console: 3.5inH x 6.25inW x 1.5inD

Ptec Ionizing Blow Off (Air) Gun Two Filter. Ptec Ionizing Blow Off (Air) Gun, Two Filters, One Installed, Power Input AC 100V approx 240V, 50/60Hz, Power Outlet: un-fused, 0.5A or 1.0A max, Temperature: 66-78 deg F, Dimensions: Hand Unit: 8.5inH x 4inW x 1inD, Console: 3.5inH x 6.25inW x 1.5inD

Output Ionizer Nozzle tip, Standard, 15 Degree Tip, produces a standard ionized air stream, for Ptec Air Ionizer

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 24inx 40 feet rolls, Thickness: 2.54mm, lifetime warranty on electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 30inx 40 feet rolls, Thickness: 2.54mm, lifetime warranty on electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 36inx 40 feet rolls, Thickness: 2.54mm, lifetime warranty on electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 24in X 36in, Thickness: 2.54mm, lifetime warranty on the electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 24in X 48in, Thickness: 2.54mm, lifetime warranty on the electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 24in X 60in, Thickness: 2.54mm, lifetime warranty on the electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 24in X 72in, Thickness: 2.54mm, lifetime warranty on the electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 30in X 60in, Thickness: 2.54mm, lifetime warranty on the electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 30in X 72in, Thickness: 2.54mm, lifetime warranty on the electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 36in X 60in, Thickness: 2.54mm, lifetime warranty on the electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Light Blue, Size: 36in X 72in, Thickness: 2.54mm, lifetime warranty on the electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Medium Blue, Size: 24inx 40 feet rolls, Thickness: 1.53mm, lifetime warranty on electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Medium Blue, Size: 30inx 40 feet rolls, Thickness: 1.53mm, lifetime warranty on electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Medium Blue, Size: 36inx 40 feet rolls, Thickness: 1.53mm, lifetime warranty on electrical resistance (10 raised to 8 -10 raised to 9 ohms). Compliant to ANSI / ESDA S20.20

Single Layer Vinyl Mats. SpecMat-H ESD Mat is a single-layer, ESD-safe thermoplastic vinyl made for bench tops. Color: Medium Blue, Size: 24inX36in, Thickness: 1.53mm, lifetime warranty on the electrical resistance (10 raised to 8 -10 raised to 9ohms). Compliant to ANSI / ESDA S20.20, Recyclable

Category